qemu/qmp-commands.hx

   1 HXCOMM QMP dispatch table and documentation
   2 HXCOMM Text between SQMP and EQMP is copied to the QMP documentation file and
   3 HXCOMM does not show up in the other formats.
   4
   5 SQMP
   6                         QMP Supported Commands
   7                         ----------------------
   8
   9 This document describes all commands currently supported by QMP.
  10
  11 Most of the time their usage is exactly the same as in the user Monitor, this
  12 means that any other document which also describe commands (the manpage,
  13 QEMU's manual, etc) can and should be consulted.
  14
  15 QMP has two types of commands: regular and query commands. Regular commands
  16 usually change the Virtual Machine's state someway, while query commands just
  17 return information. The sections below are divided accordingly.
  18
  19 It's important to observe that all communication examples are formatted in
  20 a reader-friendly way, so that they're easier to understand. However, in real
  21 protocol usage, they're emitted as a single line.
  22
  23 Also, the following notation is used to denote data flow:
  24
  25 -> data issued by the Client
  26 <- Server data response
  27
  28 Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed
  29 information on the Server command and response formats.
  30
  31 NOTE: This document is temporary and will be replaced soon.
  32
  33 1. Stability Considerations
  34 ===========================
  35
  36 The current QMP command set (described in this file) may be useful for a
  37 number of use cases, however it's limited and several commands have bad
  38 defined semantics, specially with regard to command completion.
  39
  40 These problems are going to be solved incrementally in the next QEMU releases
  41 and we're going to establish a deprecation policy for badly defined commands.
  42
  43 If you're planning to adopt QMP, please observe the following:
  44
  45     1. The deprecation policy will take effect and be documented soon, please
  46        check the documentation of each used command as soon as a new release of
  47        QEMU is available
  48
  49     2. DO NOT rely on anything which is not explicit documented
  50
  51     3. Errors, in special, are not documented. Applications should NOT check
  52        for specific errors classes or data (it's strongly recommended to only
  53        check for the "error" key)
  54
  55 2. Regular Commands
  56 ===================
  57
  58 Server's responses in the examples below are always a success response, please
  59 refer to the QMP specification for more details on error responses.
  60
  61 EQMP
  62
  63     {
  64         .name       = "quit",
  65         .args_type  = "",
  66         .mhandler.cmd_new = qmp_marshal_input_quit,
  67     },
  68
  69 SQMP
  70 quit
  71 ----
  72
  73 Quit the emulator.
  74
  75 Arguments: None.
  76
  77 Example:
  78
  79 -> { "execute": "quit" }
  80 <- { "return": {} }
  81
  82 EQMP
  83
  84     {
  85         .name       = "eject",
  86         .args_type  = "force:-f,device:B",
  87         .mhandler.cmd_new = qmp_marshal_input_eject,
  88     },
  89
  90 SQMP
  91 eject
  92 -----
  93
  94 Eject a removable medium.
  95
  96 Arguments:
  97
  98 - force: force ejection (json-bool, optional)
  99 - device: device name (json-string)
 100
 101 Example:
 102
 103 -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } }
 104 <- { "return": {} }
 105
 106 Note: The "force" argument defaults to false.
 107
 108 EQMP
 109
 110     {
 111         .name       = "change",
 112         .args_type  = "device:B,target:F,arg:s?",
 113         .mhandler.cmd_new = qmp_marshal_input_change,
 114     },
 115
 116 SQMP
 117 change
 118 ------
 119
 120 Change a removable medium or VNC configuration.
 121
 122 Arguments:
 123
 124 - "device": device name (json-string)
 125 - "target": filename or item (json-string)
 126 - "arg": additional argument (json-string, optional)
 127
 128 Examples:
 129
 130 1. Change a removable medium
 131
 132 -> { "execute": "change",
 133              "arguments": { "device": "ide1-cd0",
 134                             "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
 135 <- { "return": {} }
 136
 137 2. Change VNC password
 138
 139 -> { "execute": "change",
 140              "arguments": { "device": "vnc", "target": "password",
 141                             "arg": "foobar1" } }
 142 <- { "return": {} }
 143
 144 EQMP
 145
 146     {
 147         .name       = "screendump",
 148         .args_type  = "filename:F",
 149         .mhandler.cmd_new = qmp_marshal_input_screendump,
 150     },
 151
 152 SQMP
 153 screendump
 154 ----------
 155
 156 Save screen into PPM image.
 157
 158 Arguments:
 159
 160 - "filename": file path (json-string)
 161
 162 Example:
 163
 164 -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
 165 <- { "return": {} }
 166
 167 EQMP
 168
 169     {
 170         .name       = "stop",
 171         .args_type  = "",
 172         .mhandler.cmd_new = qmp_marshal_input_stop,
 173     },
 174
 175 SQMP
 176 stop
 177 ----
 178
 179 Stop the emulator.
 180
 181 Arguments: None.
 182
 183 Example:
 184
 185 -> { "execute": "stop" }
 186 <- { "return": {} }
 187
 188 EQMP
 189
 190     {
 191         .name       = "cont",
 192         .args_type  = "",
 193         .mhandler.cmd_new = qmp_marshal_input_cont,
 194     },
 195
 196 SQMP
 197 cont
 198 ----
 199
 200 Resume emulation.
 201
 202 Arguments: None.
 203
 204 Example:
 205
 206 -> { "execute": "cont" }
 207 <- { "return": {} }
 208
 209 EQMP
 210
 211     {
 212         .name       = "system_wakeup",
 213         .args_type  = "",
 214         .mhandler.cmd_new = qmp_marshal_input_system_wakeup,
 215     },
 216
 217 SQMP
 218 system_wakeup
 219 -------------
 220
 221 Wakeup guest from suspend.
 222
 223 Arguments: None.
 224
 225 Example:
 226
 227 -> { "execute": "system_wakeup" }
 228 <- { "return": {} }
 229
 230 EQMP
 231
 232     {
 233         .name       = "system_reset",
 234         .args_type  = "",
 235         .mhandler.cmd_new = qmp_marshal_input_system_reset,
 236     },
 237
 238 SQMP
 239 system_reset
 240 ------------
 241
 242 Reset the system.
 243
 244 Arguments: None.
 245
 246 Example:
 247
 248 -> { "execute": "system_reset" }
 249 <- { "return": {} }
 250
 251 EQMP
 252
 253     {
 254         .name       = "system_powerdown",
 255         .args_type  = "",
 256         .mhandler.cmd_new = qmp_marshal_input_system_powerdown,
 257     },
 258
 259 SQMP
 260 system_powerdown
 261 ----------------
 262
 263 Send system power down event.
 264
 265 Arguments: None.
 266
 267 Example:
 268
 269 -> { "execute": "system_powerdown" }
 270 <- { "return": {} }
 271
 272 EQMP
 273
 274     {
 275         .name       = "device_add",
 276         .args_type  = "device:O",
 277         .params     = "driver[,prop=value][,...]",
 278         .help       = "add device, like -device on the command line",
 279         .mhandler.cmd_new = qmp_device_add,
 280     },
 281
 282 SQMP
 283 device_add
 284 ----------
 285
 286 Add a device.
 287
 288 Arguments:
 289
 290 - "driver": the name of the new device's driver (json-string)
 291 - "bus": the device's parent bus (device tree path, json-string, optional)
 292 - "id": the device's ID, must be unique (json-string)
 293 - device properties
 294
 295 Example:
 296
 297 -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } }
 298 <- { "return": {} }
 299
 300 Notes:
 301
 302 (1) For detailed information about this command, please refer to the
 303     'docs/qdev-device-use.txt' file.
 304
 305 (2) It's possible to list device properties by running QEMU with the
 306     "-device DEVICE,\?" command-line argument, where DEVICE is the device's name
 307
 308 EQMP
 309
 310     {
 311         .name       = "device_del",
 312         .args_type  = "id:s",
 313         .mhandler.cmd_new = qmp_marshal_input_device_del,
 314     },
 315
 316 SQMP
 317 device_del
 318 ----------
 319
 320 Remove a device.
 321
 322 Arguments:
 323
 324 - "id": the device's ID (json-string)
 325
 326 Example:
 327
 328 -> { "execute": "device_del", "arguments": { "id": "net1" } }
 329 <- { "return": {} }
 330
 331 EQMP
 332
 333     {
 334         .name       = "send-key",
 335         .args_type  = "keys:q,hold-time:i?",
 336         .mhandler.cmd_new = qmp_marshal_input_send_key,
 337     },
 338
 339 SQMP
 340 send-key
 341 ----------
 342
 343 Send keys to VM.
 344
 345 Arguments:
 346
 347 keys array:
 348     - "key": key sequence (a json-array of key union values,
 349              union can be number or qcode enum)
 350
 351 - hold-time: time to delay key up events, milliseconds. Defaults to 100
 352              (json-int, optional)
 353
 354 Example:
 355
 356 -> { "execute": "send-key",
 357      "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
 358                               { "type": "qcode", "data": "alt" },
 359                               { "type": "qcode", "data": "delete" } ] } }
 360 <- { "return": {} }
 361
 362 EQMP
 363
 364     {
 365         .name       = "cpu",
 366         .args_type  = "index:i",
 367         .mhandler.cmd_new = qmp_marshal_input_cpu,
 368     },
 369
 370 SQMP
 371 cpu
 372 ---
 373
 374 Set the default CPU.
 375
 376 Arguments:
 377
 378 - "index": the CPU's index (json-int)
 379
 380 Example:
 381
 382 -> { "execute": "cpu", "arguments": { "index": 0 } }
 383 <- { "return": {} }
 384
 385 Note: CPUs' indexes are obtained with the 'query-cpus' command.
 386
 387 EQMP
 388
 389     {
 390         .name       = "cpu-add",
 391         .args_type  = "id:i",
 392         .mhandler.cmd_new = qmp_marshal_input_cpu_add,
 393     },
 394
 395 SQMP
 396 cpu-add
 397 -------
 398
 399 Adds virtual cpu
 400
 401 Arguments:
 402
 403 - "id": cpu id (json-int)
 404
 405 Example:
 406
 407 -> { "execute": "cpu-add", "arguments": { "id": 2 } }
 408 <- { "return": {} }
 409
 410 EQMP
 411
 412     {
 413         .name       = "memsave",
 414         .args_type  = "val:l,size:i,filename:s,cpu:i?",
 415         .mhandler.cmd_new = qmp_marshal_input_memsave,
 416     },
 417
 418 SQMP
 419 memsave
 420 -------
 421
 422 Save to disk virtual memory dump starting at 'val' of size 'size'.
 423
 424 Arguments:
 425
 426 - "val": the starting address (json-int)
 427 - "size": the memory size, in bytes (json-int)
 428 - "filename": file path (json-string)
 429 - "cpu": virtual CPU index (json-int, optional)
 430
 431 Example:
 432
 433 -> { "execute": "memsave",
 434              "arguments": { "val": 10,
 435                             "size": 100,
 436                             "filename": "/tmp/virtual-mem-dump" } }
 437 <- { "return": {} }
 438
 439 EQMP
 440
 441     {
 442         .name       = "pmemsave",
 443         .args_type  = "val:l,size:i,filename:s",
 444         .mhandler.cmd_new = qmp_marshal_input_pmemsave,
 445     },
 446
 447 SQMP
 448 pmemsave
 449 --------
 450
 451 Save to disk physical memory dump starting at 'val' of size 'size'.
 452
 453 Arguments:
 454
 455 - "val": the starting address (json-int)
 456 - "size": the memory size, in bytes (json-int)
 457 - "filename": file path (json-string)
 458
 459 Example:
 460
 461 -> { "execute": "pmemsave",
 462              "arguments": { "val": 10,
 463                             "size": 100,
 464                             "filename": "/tmp/physical-mem-dump" } }
 465 <- { "return": {} }
 466
 467 EQMP
 468
 469     {
 470         .name       = "inject-nmi",
 471         .args_type  = "",
 472         .mhandler.cmd_new = qmp_marshal_input_inject_nmi,
 473     },
 474
 475 SQMP
 476 inject-nmi
 477 ----------
 478
 479 Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64).
 480
 481 Arguments: None.
 482
 483 Example:
 484
 485 -> { "execute": "inject-nmi" }
 486 <- { "return": {} }
 487
 488 Note: inject-nmi fails when the guest doesn't support injecting.
 489
 490 EQMP
 491
 492     {
 493         .name       = "ringbuf-write",
 494         .args_type  = "device:s,data:s,format:s?",
 495         .mhandler.cmd_new = qmp_marshal_input_ringbuf_write,
 496     },
 497
 498 SQMP
 499 ringbuf-write
 500 -------------
 501
 502 Write to a ring buffer character device.
 503
 504 Arguments:
 505
 506 - "device": ring buffer character device name (json-string)
 507 - "data": data to write (json-string)
 508 - "format": data format (json-string, optional)
 509           - Possible values: "utf8" (default), "base64"
 510             Bug: invalid base64 is currently not rejected.
 511             Whitespace *is* invalid.
 512
 513 Example:
 514
 515 -> { "execute": "ringbuf-write",
 516                 "arguments": { "device": "foo",
 517                                "data": "abcdefgh",
 518                                "format": "utf8" } }
 519 <- { "return": {} }
 520
 521 EQMP
 522
 523     {
 524         .name       = "ringbuf-read",
 525         .args_type  = "device:s,size:i,format:s?",
 526         .mhandler.cmd_new = qmp_marshal_input_ringbuf_read,
 527     },
 528
 529 SQMP
 530 ringbuf-read
 531 -------------
 532
 533 Read from a ring buffer character device.
 534
 535 Arguments:
 536
 537 - "device": ring buffer character device name (json-string)
 538 - "size": how many bytes to read at most (json-int)
 539           - Number of data bytes, not number of characters in encoded data
 540 - "format": data format (json-string, optional)
 541           - Possible values: "utf8" (default), "base64"
 542           - Naturally, format "utf8" works only when the ring buffer
 543             contains valid UTF-8 text.  Invalid UTF-8 sequences get
 544             replaced.  Bug: replacement doesn't work.  Bug: can screw
 545             up on encountering NUL characters, after the ring buffer
 546             lost data, and when reading stops because the size limit
 547             is reached.
 548
 549 Example:
 550
 551 -> { "execute": "ringbuf-read",
 552                 "arguments": { "device": "foo",
 553                                "size": 1000,
 554                                "format": "utf8" } }
 555 <- {"return": "abcdefgh"}
 556
 557 EQMP
 558
 559     {
 560         .name       = "xen-save-devices-state",
 561         .args_type  = "filename:F",
 562     .mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state,
 563     },
 564
 565 SQMP
 566 xen-save-devices-state
 567 -------
 568
 569 Save the state of all devices to file. The RAM and the block devices
 570 of the VM are not saved by this command.
 571
 572 Arguments:
 573
 574 - "filename": the file to save the state of the devices to as binary
 575 data. See xen-save-devices-state.txt for a description of the binary
 576 format.
 577
 578 Example:
 579
 580 -> { "execute": "xen-save-devices-state",
 581      "arguments": { "filename": "/tmp/save" } }
 582 <- { "return": {} }
 583
 584 EQMP
 585
 586     {
 587         .name       = "xen-set-global-dirty-log",
 588         .args_type  = "enable:b",
 589         .mhandler.cmd_new = qmp_marshal_input_xen_set_global_dirty_log,
 590     },
 591
 592 SQMP
 593 xen-set-global-dirty-log
 594 -------
 595
 596 Enable or disable the global dirty log mode.
 597
 598 Arguments:
 599
 600 - "enable": Enable it or disable it.
 601
 602 Example:
 603
 604 -> { "execute": "xen-set-global-dirty-log",
 605      "arguments": { "enable": true } }
 606 <- { "return": {} }
 607
 608 EQMP
 609
 610     {
 611         .name       = "migrate",
 612         .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",
 613         .mhandler.cmd_new = qmp_marshal_input_migrate,
 614     },
 615
 616 SQMP
 617 migrate
 618 -------
 619
 620 Migrate to URI.
 621
 622 Arguments:
 623
 624 - "blk": block migration, full disk copy (json-bool, optional)
 625 - "inc": incremental disk copy (json-bool, optional)
 626 - "uri": Destination URI (json-string)
 627
 628 Example:
 629
 630 -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
 631 <- { "return": {} }
 632
 633 Notes:
 634
 635 (1) The 'query-migrate' command should be used to check migration's progress
 636     and final result (this information is provided by the 'status' member)
 637 (2) All boolean arguments default to false
 638 (3) The user Monitor's "detach" argument is invalid in QMP and should not
 639     be used
 640
 641 EQMP
 642
 643     {
 644         .name       = "migrate_cancel",
 645         .args_type  = "",
 646         .mhandler.cmd_new = qmp_marshal_input_migrate_cancel,
 647     },
 648
 649 SQMP
 650 migrate_cancel
 651 --------------
 652
 653 Cancel the current migration.
 654
 655 Arguments: None.
 656
 657 Example:
 658
 659 -> { "execute": "migrate_cancel" }
 660 <- { "return": {} }
 661
 662 EQMP
 663
 664     {
 665         .name       = "migrate-incoming",
 666         .args_type  = "uri:s",
 667         .mhandler.cmd_new = qmp_marshal_input_migrate_incoming,
 668     },
 669
 670 SQMP
 671 migrate-incoming
 672 ----------------
 673
 674 Continue an incoming migration
 675
 676 Arguments:
 677
 678 - "uri": Source/listening URI (json-string)
 679
 680 Example:
 681
 682 -> { "execute": "migrate-incoming", "arguments": { "uri": "tcp::4446" } }
 683 <- { "return": {} }
 684
 685 Notes:
 686
 687 (1) QEMU must be started with -incoming defer to allow migrate-incoming to
 688     be used
 689 (2) The uri format is the same as for -incoming
 690
 691 EQMP
 692     {
 693         .name       = "migrate-set-cache-size",
 694         .args_type  = "value:o",
 695         .mhandler.cmd_new = qmp_marshal_input_migrate_set_cache_size,
 696     },
 697
 698 SQMP
 699 migrate-set-cache-size
 700 ----------------------
 701
 702 Set cache size to be used by XBZRLE migration, the cache size will be rounded
 703 down to the nearest power of 2
 704
 705 Arguments:
 706
 707 - "value": cache size in bytes (json-int)
 708
 709 Example:
 710
 711 -> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } }
 712 <- { "return": {} }
 713
 714 EQMP
 715     {
 716         .name       = "query-migrate-cache-size",
 717         .args_type  = "",
 718         .mhandler.cmd_new = qmp_marshal_input_query_migrate_cache_size,
 719     },
 720
 721 SQMP
 722 query-migrate-cache-size
 723 ------------------------
 724
 725 Show cache size to be used by XBZRLE migration
 726
 727 returns a json-object with the following information:
 728 - "size" : json-int
 729
 730 Example:
 731
 732 -> { "execute": "query-migrate-cache-size" }
 733 <- { "return": 67108864 }
 734
 735 EQMP
 736
 737     {
 738         .name       = "migrate_set_speed",
 739         .args_type  = "value:o",
 740         .mhandler.cmd_new = qmp_marshal_input_migrate_set_speed,
 741     },
 742
 743 SQMP
 744 migrate_set_speed
 745 -----------------
 746
 747 Set maximum speed for migrations.
 748
 749 Arguments:
 750
 751 - "value": maximum speed, in bytes per second (json-int)
 752
 753 Example:
 754
 755 -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
 756 <- { "return": {} }
 757
 758 EQMP
 759
 760     {
 761         .name       = "migrate_set_downtime",
 762         .args_type  = "value:T",
 763         .mhandler.cmd_new = qmp_marshal_input_migrate_set_downtime,
 764     },
 765
 766 SQMP
 767 migrate_set_downtime
 768 --------------------
 769
 770 Set maximum tolerated downtime (in seconds) for migrations.
 771
 772 Arguments:
 773
 774 - "value": maximum downtime (json-number)
 775
 776 Example:
 777
 778 -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
 779 <- { "return": {} }
 780
 781 EQMP
 782
 783     {
 784         .name       = "client_migrate_info",
 785         .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
 786         .params     = "protocol hostname port tls-port cert-subject",
 787         .help       = "set migration information for remote display",
 788         .mhandler.cmd_new = qmp_marshal_input_client_migrate_info,
 789     },
 790
 791 SQMP
 792 client_migrate_info
 793 -------------------
 794
 795 Set migration information for remote display.  This makes the server
 796 ask the client to automatically reconnect using the new parameters
 797 once migration finished successfully.  Only implemented for SPICE.
 798
 799 Arguments:
 800
 801 - "protocol":     must be "spice" (json-string)
 802 - "hostname":     migration target hostname (json-string)
 803 - "port":         spice tcp port for plaintext channels (json-int, optional)
 804 - "tls-port":     spice tcp port for tls-secured channels (json-int, optional)
 805 - "cert-subject": server certificate subject (json-string, optional)
 806
 807 Example:
 808
 809 -> { "execute": "client_migrate_info",
 810      "arguments": { "protocol": "spice",
 811                     "hostname": "virt42.lab.kraxel.org",
 812                     "port": 1234 } }
 813 <- { "return": {} }
 814
 815 EQMP
 816
 817     {
 818         .name       = "dump-guest-memory",
 819         .args_type  = "paging:b,protocol:s,begin:i?,end:i?,format:s?",
 820         .params     = "-p protocol [begin] [length] [format]",
 821         .help       = "dump guest memory to file",
 822         .mhandler.cmd_new = qmp_marshal_input_dump_guest_memory,
 823     },
 824
 825 SQMP
 826 dump
 827
 828
 829 Dump guest memory to file. The file can be processed with crash or gdb.
 830
 831 Arguments:
 832
 833 - "paging": do paging to get guest's memory mapping (json-bool)
 834 - "protocol": destination file(started with "file:") or destination file
 835               descriptor (started with "fd:") (json-string)
 836 - "begin": the starting physical address. It's optional, and should be specified
 837            with length together (json-int)
 838 - "length": the memory size, in bytes. It's optional, and should be specified
 839             with begin together (json-int)
 840 - "format": the format of guest memory dump. It's optional, and can be
 841             elf|kdump-zlib|kdump-lzo|kdump-snappy, but non-elf formats will
 842             conflict with paging and filter, ie. begin and length (json-string)
 843
 844 Example:
 845
 846 -> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } }
 847 <- { "return": {} }
 848
 849 Notes:
 850
 851 (1) All boolean arguments default to false
 852
 853 EQMP
 854
 855     {
 856         .name       = "query-dump-guest-memory-capability",
 857         .args_type  = "",
 858     .mhandler.cmd_new = qmp_marshal_input_query_dump_guest_memory_capability,
 859     },
 860
 861 SQMP
 862 query-dump-guest-memory-capability
 863 ----------
 864
 865 Show available formats for 'dump-guest-memory'
 866
 867 Example:
 868
 869 -> { "execute": "query-dump-guest-memory-capability" }
 870 <- { "return": { "formats":
 871                     ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
 872
 873 EQMP
 874
 875     {
 876         .name       = "netdev_add",
 877         .args_type  = "netdev:O",
 878         .mhandler.cmd_new = qmp_netdev_add,
 879     },
 880
 881 SQMP
 882 netdev_add
 883 ----------
 884
 885 Add host network device.
 886
 887 Arguments:
 888
 889 - "type": the device type, "tap", "user", ... (json-string)
 890 - "id": the device's ID, must be unique (json-string)
 891 - device options
 892
 893 Example:
 894
 895 -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } }
 896 <- { "return": {} }
 897
 898 Note: The supported device options are the same ones supported by the '-netdev'
 899       command-line argument, which are listed in the '-help' output or QEMU's
 900       manual
 901
 902 EQMP
 903
 904     {
 905         .name       = "netdev_del",
 906         .args_type  = "id:s",
 907         .mhandler.cmd_new = qmp_marshal_input_netdev_del,
 908     },
 909
 910 SQMP
 911 netdev_del
 912 ----------
 913
 914 Remove host network device.
 915
 916 Arguments:
 917
 918 - "id": the device's ID, must be unique (json-string)
 919
 920 Example:
 921
 922 -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
 923 <- { "return": {} }
 924
 925
 926 EQMP
 927
 928     {
 929         .name       = "object-add",
 930         .args_type  = "qom-type:s,id:s,props:q?",
 931         .mhandler.cmd_new = qmp_object_add,
 932     },
 933
 934 SQMP
 935 object-add
 936 ----------
 937
 938 Create QOM object.
 939
 940 Arguments:
 941
 942 - "qom-type": the object's QOM type, i.e. the class name (json-string)
 943 - "id": the object's ID, must be unique (json-string)
 944 - "props": a dictionary of object property values (optional, json-dict)
 945
 946 Example:
 947
 948 -> { "execute": "object-add", "arguments": { "qom-type": "rng-random", "id": "rng1",
 949      "props": { "filename": "/dev/hwrng" } } }
 950 <- { "return": {} }
 951
 952 EQMP
 953
 954     {
 955         .name       = "object-del",
 956         .args_type  = "id:s",
 957         .mhandler.cmd_new = qmp_marshal_input_object_del,
 958     },
 959
 960 SQMP
 961 object-del
 962 ----------
 963
 964 Remove QOM object.
 965
 966 Arguments:
 967
 968 - "id": the object's ID (json-string)
 969
 970 Example:
 971
 972 -> { "execute": "object-del", "arguments": { "id": "rng1" } }
 973 <- { "return": {} }
 974
 975
 976 EQMP
 977
 978
 979     {
 980         .name       = "block_resize",
 981         .args_type  = "device:s?,node-name:s?,size:o",
 982         .mhandler.cmd_new = qmp_marshal_input_block_resize,
 983     },
 984
 985 SQMP
 986 block_resize
 987 ------------
 988
 989 Resize a block image while a guest is running.
 990
 991 Arguments:
 992
 993 - "device": the device's ID, must be unique (json-string)
 994 - "node-name": the node name in the block driver state graph (json-string)
 995 - "size": new size
 996
 997 Example:
 998
 999 -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
1000 <- { "return": {} }
1001
1002 EQMP
1003
1004     {
1005         .name       = "block-stream",
1006         .args_type  = "device:B,base:s?,speed:o?,backing-file:s?,on-error:s?",
1007         .mhandler.cmd_new = qmp_marshal_input_block_stream,
1008     },
1009
1010 SQMP
1011 block-stream
1012 ------------
1013
1014 Copy data from a backing file into a block device.
1015
1016 Arguments:
1017
1018 - "device": The device's ID, must be unique (json-string)
1019 - "base": The file name of the backing image above which copying starts
1020           (json-string, optional)
1021 - "backing-file": The backing file string to write into the active layer. This
1022                   filename is not validated.
1023
1024                   If a pathname string is such that it cannot be resolved by
1025                   QEMU, that means that subsequent QMP or HMP commands must use
1026                   node-names for the image in question, as filename lookup
1027                   methods will fail.
1028
1029                   If not specified, QEMU will automatically determine the
1030                   backing file string to use, or error out if there is no
1031                   obvious choice.  Care should be taken when specifying the
1032                   string, to specify a valid filename or protocol.
1033                   (json-string, optional) (Since 2.1)
1034 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1035 - "on-error": the action to take on an error (default 'report').  'stop' and
1036               'enospc' can only be used if the block device supports io-status.
1037               (json-string, optional) (Since 2.1)
1038
1039 Example:
1040
1041 -> { "execute": "block-stream", "arguments": { "device": "virtio0",
1042                                                "base": "/tmp/master.qcow2" } }
1043 <- { "return": {} }
1044
1045 EQMP
1046
1047     {
1048         .name       = "block-commit",
1049         .args_type  = "device:B,base:s?,top:s?,backing-file:s?,speed:o?",
1050         .mhandler.cmd_new = qmp_marshal_input_block_commit,
1051     },
1052
1053 SQMP
1054 block-commit
1055 ------------
1056
1057 Live commit of data from overlay image nodes into backing nodes - i.e., writes
1058 data between 'top' and 'base' into 'base'.
1059
1060 Arguments:
1061
1062 - "device": The device's ID, must be unique (json-string)
1063 - "base": The file name of the backing image to write data into.
1064           If not specified, this is the deepest backing image
1065           (json-string, optional)
1066 - "top":  The file name of the backing image within the image chain,
1067           which contains the topmost data to be committed down. If
1068           not specified, this is the active layer. (json-string, optional)
1069
1070 - backing-file:     The backing file string to write into the overlay
1071                     image of 'top'.  If 'top' is the active layer,
1072                     specifying a backing file string is an error. This
1073                     filename is not validated.
1074
1075                     If a pathname string is such that it cannot be
1076                     resolved by QEMU, that means that subsequent QMP or
1077                     HMP commands must use node-names for the image in
1078                     question, as filename lookup methods will fail.
1079
1080                     If not specified, QEMU will automatically determine
1081                     the backing file string to use, or error out if
1082                     there is no obvious choice. Care should be taken
1083                     when specifying the string, to specify a valid
1084                     filename or protocol.
1085                     (json-string, optional) (Since 2.1)
1086
1087           If top == base, that is an error.
1088           If top == active, the job will not be completed by itself,
1089           user needs to complete the job with the block-job-complete
1090           command after getting the ready event. (Since 2.0)
1091
1092           If the base image is smaller than top, then the base image
1093           will be resized to be the same size as top.  If top is
1094           smaller than the base image, the base will not be
1095           truncated.  If you want the base image size to match the
1096           size of the smaller top, you can safely truncate it
1097           yourself once the commit operation successfully completes.
1098           (json-string)
1099 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1100
1101
1102 Example:
1103
1104 -> { "execute": "block-commit", "arguments": { "device": "virtio0",
1105                                               "top": "/tmp/snap1.qcow2" } }
1106 <- { "return": {} }
1107
1108 EQMP
1109
1110     {
1111         .name       = "drive-backup",
1112         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1113                       "bitmap:s?,on-source-error:s?,on-target-error:s?",
1114         .mhandler.cmd_new = qmp_marshal_input_drive_backup,
1115     },
1116
1117 SQMP
1118 drive-backup
1119 ------------
1120
1121 Start a point-in-time copy of a block device to a new destination.  The
1122 status of ongoing drive-backup operations can be checked with
1123 query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
1124 The operation can be stopped before it has completed using the
1125 block-job-cancel command.
1126
1127 Arguments:
1128
1129 - "device": the name of the device which should be copied.
1130             (json-string)
1131 - "target": the target of the new image. If the file exists, or if it is a
1132             device, the existing file/device will be used as the new
1133             destination.  If it does not exist, a new file will be created.
1134             (json-string)
1135 - "format": the format of the new destination, default is to probe if 'mode' is
1136             'existing', else the format of the source
1137             (json-string, optional)
1138 - "sync": what parts of the disk image should be copied to the destination;
1139   possibilities include "full" for all the disk, "top" for only the sectors
1140   allocated in the topmost image, "incremental" for only the dirty sectors in
1141   the bitmap, or "none" to only replicate new I/O (MirrorSyncMode).
1142 - "bitmap": dirty bitmap name for sync==incremental. Must be present if sync
1143             is "incremental", must NOT be present otherwise.
1144 - "mode": whether and how QEMU should create a new image
1145           (NewImageMode, optional, default 'absolute-paths')
1146 - "speed": the maximum speed, in bytes per second (json-int, optional)
1147 - "on-source-error": the action to take on an error on the source, default
1148                      'report'.  'stop' and 'enospc' can only be used
1149                      if the block device supports io-status.
1150                      (BlockdevOnError, optional)
1151 - "on-target-error": the action to take on an error on the target, default
1152                      'report' (no limitations, since this applies to
1153                      a different block device than device).
1154                      (BlockdevOnError, optional)
1155
1156 Example:
1157 -> { "execute": "drive-backup", "arguments": { "device": "drive0",
1158                                                "sync": "full",
1159                                                "target": "backup.img" } }
1160 <- { "return": {} }
1161
1162 EQMP
1163
1164     {
1165         .name       = "blockdev-backup",
1166         .args_type  = "sync:s,device:B,target:B,speed:i?,"
1167                       "on-source-error:s?,on-target-error:s?",
1168         .mhandler.cmd_new = qmp_marshal_input_blockdev_backup,
1169     },
1170
1171 SQMP
1172 blockdev-backup
1173 ---------------
1174
1175 The device version of drive-backup: this command takes an existing named device
1176 as backup target.
1177
1178 Arguments:
1179
1180 - "device": the name of the device which should be copied.
1181             (json-string)
1182 - "target": the name of the backup target device. (json-string)
1183 - "sync": what parts of the disk image should be copied to the destination;
1184           possibilities include "full" for all the disk, "top" for only the
1185           sectors allocated in the topmost image, or "none" to only replicate
1186           new I/O (MirrorSyncMode).
1187 - "speed": the maximum speed, in bytes per second (json-int, optional)
1188 - "on-source-error": the action to take on an error on the source, default
1189                      'report'.  'stop' and 'enospc' can only be used
1190                      if the block device supports io-status.
1191                      (BlockdevOnError, optional)
1192 - "on-target-error": the action to take on an error on the target, default
1193                      'report' (no limitations, since this applies to
1194                      a different block device than device).
1195                      (BlockdevOnError, optional)
1196
1197 Example:
1198 -> { "execute": "blockdev-backup", "arguments": { "device": "src-id",
1199                                                   "sync": "full",
1200                                                   "target": "tgt-id" } }
1201 <- { "return": {} }
1202
1203 EQMP
1204
1205     {
1206         .name       = "block-job-set-speed",
1207         .args_type  = "device:B,speed:o",
1208         .mhandler.cmd_new = qmp_marshal_input_block_job_set_speed,
1209     },
1210
1211     {
1212         .name       = "block-job-cancel",
1213         .args_type  = "device:B,force:b?",
1214         .mhandler.cmd_new = qmp_marshal_input_block_job_cancel,
1215     },
1216     {
1217         .name       = "block-job-pause",
1218         .args_type  = "device:B",
1219         .mhandler.cmd_new = qmp_marshal_input_block_job_pause,
1220     },
1221     {
1222         .name       = "block-job-resume",
1223         .args_type  = "device:B",
1224         .mhandler.cmd_new = qmp_marshal_input_block_job_resume,
1225     },
1226     {
1227         .name       = "block-job-complete",
1228         .args_type  = "device:B",
1229         .mhandler.cmd_new = qmp_marshal_input_block_job_complete,
1230     },
1231     {
1232         .name       = "transaction",
1233         .args_type  = "actions:q",
1234         .mhandler.cmd_new = qmp_marshal_input_transaction,
1235     },
1236
1237 SQMP
1238 transaction
1239 -----------
1240
1241 Atomically operate on one or more block devices.  The only supported operations
1242 for now are drive-backup, internal and external snapshotting.  A list of
1243 dictionaries is accepted, that contains the actions to be performed.
1244 If there is any failure performing any of the operations, all operations
1245 for the group are abandoned.
1246
1247 For external snapshots, the dictionary contains the device, the file to use for
1248 the new snapshot, and the format.  The default format, if not specified, is
1249 qcow2.
1250
1251 Each new snapshot defaults to being created by QEMU (wiping any
1252 contents if the file already exists), but it is also possible to reuse
1253 an externally-created file.  In the latter case, you should ensure that
1254 the new image file has the same contents as the current one; QEMU cannot
1255 perform any meaningful check.  Typically this is achieved by using the
1256 current image file as the backing file for the new image.
1257
1258 On failure, the original disks pre-snapshot attempt will be used.
1259
1260 For internal snapshots, the dictionary contains the device and the snapshot's
1261 name.  If an internal snapshot matching name already exists, the request will
1262 be rejected.  Only some image formats support it, for example, qcow2, rbd,
1263 and sheepdog.
1264
1265 On failure, qemu will try delete the newly created internal snapshot in the
1266 transaction.  When an I/O error occurs during deletion, the user needs to fix
1267 it later with qemu-img or other command.
1268
1269 Arguments:
1270
1271 actions array:
1272     - "type": the operation to perform.  The only supported
1273       value is "blockdev-snapshot-sync". (json-string)
1274     - "data": a dictionary.  The contents depend on the value
1275       of "type".  When "type" is "blockdev-snapshot-sync":
1276       - "device": device name to snapshot (json-string)
1277       - "node-name": graph node name to snapshot (json-string)
1278       - "snapshot-file": name of new image file (json-string)
1279       - "snapshot-node-name": graph node name of the new snapshot (json-string)
1280       - "format": format of new image (json-string, optional)
1281       - "mode": whether and how QEMU should create the snapshot file
1282         (NewImageMode, optional, default "absolute-paths")
1283       When "type" is "blockdev-snapshot-internal-sync":
1284       - "device": device name to snapshot (json-string)
1285       - "name": name of the new snapshot (json-string)
1286
1287 Example:
1288
1289 -> { "execute": "transaction",
1290      "arguments": { "actions": [
1291          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0",
1292                                          "snapshot-file": "/some/place/my-image",
1293                                          "format": "qcow2" } },
1294          { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile",
1295                                          "snapshot-file": "/some/place/my-image2",
1296                                          "snapshot-node-name": "node3432",
1297                                          "mode": "existing",
1298                                          "format": "qcow2" } },
1299          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1",
1300                                          "snapshot-file": "/some/place/my-image2",
1301                                          "mode": "existing",
1302                                          "format": "qcow2" } },
1303          { "type": "blockdev-snapshot-internal-sync", "data" : {
1304                                          "device": "ide-hd2",
1305                                          "name": "snapshot0" } } ] } }
1306 <- { "return": {} }
1307
1308 EQMP
1309
1310     {
1311         .name       = "block-dirty-bitmap-add",
1312         .args_type  = "node:B,name:s,granularity:i?",
1313         .mhandler.cmd_new = qmp_marshal_input_block_dirty_bitmap_add,
1314     },
1315
1316 SQMP
1317
1318 block-dirty-bitmap-add
1319 ----------------------
1320 Since 2.4
1321
1322 Create a dirty bitmap with a name on the device, and start tracking the writes.
1323
1324 Arguments:
1325
1326 - "node": device/node on which to create dirty bitmap (json-string)
1327 - "name": name of the new dirty bitmap (json-string)
1328 - "granularity": granularity to track writes with (int, optional)
1329
1330 Example:
1331
1332 -> { "execute": "block-dirty-bitmap-add", "arguments": { "node": "drive0",
1333                                                    "name": "bitmap0" } }
1334 <- { "return": {} }
1335
1336 EQMP
1337
1338     {
1339         .name       = "block-dirty-bitmap-remove",
1340         .args_type  = "node:B,name:s",
1341         .mhandler.cmd_new = qmp_marshal_input_block_dirty_bitmap_remove,
1342     },
1343
1344 SQMP
1345
1346 block-dirty-bitmap-remove
1347 -------------------------
1348 Since 2.4
1349
1350 Stop write tracking and remove the dirty bitmap that was created with
1351 block-dirty-bitmap-add.
1352
1353 Arguments:
1354
1355 - "node": device/node on which to remove dirty bitmap (json-string)
1356 - "name": name of the dirty bitmap to remove (json-string)
1357
1358 Example:
1359
1360 -> { "execute": "block-dirty-bitmap-remove", "arguments": { "node": "drive0",
1361                                                       "name": "bitmap0" } }
1362 <- { "return": {} }
1363
1364 EQMP
1365
1366     {
1367         .name       = "block-dirty-bitmap-clear",
1368         .args_type  = "node:B,name:s",
1369         .mhandler.cmd_new = qmp_marshal_input_block_dirty_bitmap_clear,
1370     },
1371
1372 SQMP
1373
1374 block-dirty-bitmap-clear
1375 ------------------------
1376 Since 2.4
1377
1378 Reset the dirty bitmap associated with a node so that an incremental backup
1379 from this point in time forward will only backup clusters modified after this
1380 clear operation.
1381
1382 Arguments:
1383
1384 - "node": device/node on which to remove dirty bitmap (json-string)
1385 - "name": name of the dirty bitmap to remove (json-string)
1386
1387 Example:
1388
1389 -> { "execute": "block-dirty-bitmap-clear", "arguments": { "node": "drive0",
1390                                                            "name": "bitmap0" } }
1391 <- { "return": {} }
1392
1393 EQMP
1394
1395     {
1396         .name       = "blockdev-snapshot-sync",
1397         .args_type  = "device:s?,node-name:s?,snapshot-file:s,snapshot-node-name:s?,format:s?,mode:s?",
1398         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync,
1399     },
1400
1401 SQMP
1402 blockdev-snapshot-sync
1403 ----------------------
1404
1405 Synchronous snapshot of a block device. snapshot-file specifies the
1406 target of the new image. If the file exists, or if it is a device, the
1407 snapshot will be created in the existing file/device. If does not
1408 exist, a new file will be created. format specifies the format of the
1409 snapshot image, default is qcow2.
1410
1411 Arguments:
1412
1413 - "device": device name to snapshot (json-string)
1414 - "node-name": graph node name to snapshot (json-string)
1415 - "snapshot-file": name of new image file (json-string)
1416 - "snapshot-node-name": graph node name of the new snapshot (json-string)
1417 - "mode": whether and how QEMU should create the snapshot file
1418   (NewImageMode, optional, default "absolute-paths")
1419 - "format": format of new image (json-string, optional)
1420
1421 Example:
1422
1423 -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0",
1424                                                          "snapshot-file":
1425                                                         "/some/place/my-image",
1426                                                         "format": "qcow2" } }
1427 <- { "return": {} }
1428
1429 EQMP
1430
1431     {
1432         .name       = "blockdev-snapshot-internal-sync",
1433         .args_type  = "device:B,name:s",
1434         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_internal_sync,
1435     },
1436
1437 SQMP
1438 blockdev-snapshot-internal-sync
1439 -------------------------------
1440
1441 Synchronously take an internal snapshot of a block device when the format of
1442 image used supports it.  If the name is an empty string, or a snapshot with
1443 name already exists, the operation will fail.
1444
1445 Arguments:
1446
1447 - "device": device name to snapshot (json-string)
1448 - "name": name of the new snapshot (json-string)
1449
1450 Example:
1451
1452 -> { "execute": "blockdev-snapshot-internal-sync",
1453                 "arguments": { "device": "ide-hd0",
1454                                "name": "snapshot0" }
1455    }
1456 <- { "return": {} }
1457
1458 EQMP
1459
1460     {
1461         .name       = "blockdev-snapshot-delete-internal-sync",
1462         .args_type  = "device:B,id:s?,name:s?",
1463         .mhandler.cmd_new =
1464                       qmp_marshal_input_blockdev_snapshot_delete_internal_sync,
1465     },
1466
1467 SQMP
1468 blockdev-snapshot-delete-internal-sync
1469 --------------------------------------
1470
1471 Synchronously delete an internal snapshot of a block device when the format of
1472 image used supports it.  The snapshot is identified by name or id or both.  One
1473 of name or id is required.  If the snapshot is not found, the operation will
1474 fail.
1475
1476 Arguments:
1477
1478 - "device": device name (json-string)
1479 - "id": ID of the snapshot (json-string, optional)
1480 - "name": name of the snapshot (json-string, optional)
1481
1482 Example:
1483
1484 -> { "execute": "blockdev-snapshot-delete-internal-sync",
1485                 "arguments": { "device": "ide-hd0",
1486                                "name": "snapshot0" }
1487    }
1488 <- { "return": {
1489                    "id": "1",
1490                    "name": "snapshot0",
1491                    "vm-state-size": 0,
1492                    "date-sec": 1000012,
1493                    "date-nsec": 10,
1494                    "vm-clock-sec": 100,
1495                    "vm-clock-nsec": 20
1496      }
1497    }
1498
1499 EQMP
1500
1501     {
1502         .name       = "drive-mirror",
1503         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1504                       "node-name:s?,replaces:s?,"
1505                       "on-source-error:s?,on-target-error:s?,"
1506                       "unmap:b?,"
1507                       "granularity:i?,buf-size:i?",
1508         .mhandler.cmd_new = qmp_marshal_input_drive_mirror,
1509     },
1510
1511 SQMP
1512 drive-mirror
1513 ------------
1514
1515 Start mirroring a block device's writes to a new destination. target
1516 specifies the target of the new image. If the file exists, or if it is
1517 a device, it will be used as the new destination for writes. If it does not
1518 exist, a new file will be created. format specifies the format of the
1519 mirror image, default is to probe if mode='existing', else the format
1520 of the source.
1521
1522 Arguments:
1523
1524 - "device": device name to operate on (json-string)
1525 - "target": name of new image file (json-string)
1526 - "format": format of new image (json-string, optional)
1527 - "node-name": the name of the new block driver state in the node graph
1528                (json-string, optional)
1529 - "replaces": the block driver node name to replace when finished
1530               (json-string, optional)
1531 - "mode": how an image file should be created into the target
1532   file/device (NewImageMode, optional, default 'absolute-paths')
1533 - "speed": maximum speed of the streaming job, in bytes per second
1534   (json-int)
1535 - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional)
1536 - "buf_size": maximum amount of data in flight from source to target, in bytes
1537   (json-int, default 10M)
1538 - "sync": what parts of the disk image should be copied to the destination;
1539   possibilities include "full" for all the disk, "top" for only the sectors
1540   allocated in the topmost image, or "none" to only replicate new I/O
1541   (MirrorSyncMode).
1542 - "on-source-error": the action to take on an error on the source
1543   (BlockdevOnError, default 'report')
1544 - "on-target-error": the action to take on an error on the target
1545   (BlockdevOnError, default 'report')
1546 - "unmap": whether the target sectors should be discarded where source has only
1547   zeroes. (json-bool, optional, default true)
1548
1549 The default value of the granularity is the image cluster size clamped
1550 between 4096 and 65536, if the image format defines one.  If the format
1551 does not define a cluster size, the default value of the granularity
1552 is 65536.
1553
1554
1555 Example:
1556
1557 -> { "execute": "drive-mirror", "arguments": { "device": "ide-hd0",
1558                                                "target": "/some/place/my-image",
1559                                                "sync": "full",
1560                                                "format": "qcow2" } }
1561 <- { "return": {} }
1562
1563 EQMP
1564
1565     {
1566         .name       = "change-backing-file",
1567         .args_type  = "device:s,image-node-name:s,backing-file:s",
1568         .mhandler.cmd_new = qmp_marshal_input_change_backing_file,
1569     },
1570
1571 SQMP
1572 change-backing-file
1573 -------------------
1574 Since: 2.1
1575
1576 Change the backing file in the image file metadata.  This does not cause
1577 QEMU to reopen the image file to reparse the backing filename (it may,
1578 however, perform a reopen to change permissions from r/o -> r/w -> r/o,
1579 if needed). The new backing file string is written into the image file
1580 metadata, and the QEMU internal strings are updated.
1581
1582 Arguments:
1583
1584 - "image-node-name":    The name of the block driver state node of the
1585                         image to modify.  The "device" is argument is used to
1586                         verify "image-node-name" is in the chain described by
1587                         "device".
1588                         (json-string, optional)
1589
1590 - "device":             The name of the device.
1591                         (json-string)
1592
1593 - "backing-file":       The string to write as the backing file.  This string is
1594                         not validated, so care should be taken when specifying
1595                         the string or the image chain may not be able to be
1596                         reopened again.
1597                         (json-string)
1598
1599 Returns: Nothing on success
1600          If "device" does not exist or cannot be determined, DeviceNotFound
1601
1602 EQMP
1603
1604     {
1605         .name       = "balloon",
1606         .args_type  = "value:M",
1607         .mhandler.cmd_new = qmp_marshal_input_balloon,
1608     },
1609
1610 SQMP
1611 balloon
1612 -------
1613
1614 Request VM to change its memory allocation (in bytes).
1615
1616 Arguments:
1617
1618 - "value": New memory allocation (json-int)
1619
1620 Example:
1621
1622 -> { "execute": "balloon", "arguments": { "value": 536870912 } }
1623 <- { "return": {} }
1624
1625 EQMP
1626
1627     {
1628         .name       = "set_link",
1629         .args_type  = "name:s,up:b",
1630         .mhandler.cmd_new = qmp_marshal_input_set_link,
1631     },
1632
1633 SQMP
1634 set_link
1635 --------
1636
1637 Change the link status of a network adapter.
1638
1639 Arguments:
1640
1641 - "name": network device name (json-string)
1642 - "up": status is up (json-bool)
1643
1644 Example:
1645
1646 -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
1647 <- { "return": {} }
1648
1649 EQMP
1650
1651     {
1652         .name       = "getfd",
1653         .args_type  = "fdname:s",
1654         .params     = "getfd name",
1655         .help       = "receive a file descriptor via SCM rights and assign it a name",
1656         .mhandler.cmd_new = qmp_marshal_input_getfd,
1657     },
1658
1659 SQMP
1660 getfd
1661 -----
1662
1663 Receive a file descriptor via SCM rights and assign it a name.
1664
1665 Arguments:
1666
1667 - "fdname": file descriptor name (json-string)
1668
1669 Example:
1670
1671 -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
1672 <- { "return": {} }
1673
1674 Notes:
1675
1676 (1) If the name specified by the "fdname" argument already exists,
1677     the file descriptor assigned to it will be closed and replaced
1678     by the received file descriptor.
1679 (2) The 'closefd' command can be used to explicitly close the file
1680     descriptor when it is no longer needed.
1681
1682 EQMP
1683
1684     {
1685         .name       = "closefd",
1686         .args_type  = "fdname:s",
1687         .params     = "closefd name",
1688         .help       = "close a file descriptor previously passed via SCM rights",
1689         .mhandler.cmd_new = qmp_marshal_input_closefd,
1690     },
1691
1692 SQMP
1693 closefd
1694 -------
1695
1696 Close a file descriptor previously passed via SCM rights.
1697
1698 Arguments:
1699
1700 - "fdname": file descriptor name (json-string)
1701
1702 Example:
1703
1704 -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
1705 <- { "return": {} }
1706
1707 EQMP
1708
1709      {
1710         .name       = "add-fd",
1711         .args_type  = "fdset-id:i?,opaque:s?",
1712         .params     = "add-fd fdset-id opaque",
1713         .help       = "Add a file descriptor, that was passed via SCM rights, to an fd set",
1714         .mhandler.cmd_new = qmp_marshal_input_add_fd,
1715     },
1716
1717 SQMP
1718 add-fd
1719 -------
1720
1721 Add a file descriptor, that was passed via SCM rights, to an fd set.
1722
1723 Arguments:
1724
1725 - "fdset-id": The ID of the fd set to add the file descriptor to.
1726               (json-int, optional)
1727 - "opaque": A free-form string that can be used to describe the fd.
1728             (json-string, optional)
1729
1730 Return a json-object with the following information:
1731
1732 - "fdset-id": The ID of the fd set that the fd was added to. (json-int)
1733 - "fd": The file descriptor that was received via SCM rights and added to the
1734         fd set. (json-int)
1735
1736 Example:
1737
1738 -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
1739 <- { "return": { "fdset-id": 1, "fd": 3 } }
1740
1741 Notes:
1742
1743 (1) The list of fd sets is shared by all monitor connections.
1744 (2) If "fdset-id" is not specified, a new fd set will be created.
1745
1746 EQMP
1747
1748      {
1749         .name       = "remove-fd",
1750         .args_type  = "fdset-id:i,fd:i?",
1751         .params     = "remove-fd fdset-id fd",
1752         .help       = "Remove a file descriptor from an fd set",
1753         .mhandler.cmd_new = qmp_marshal_input_remove_fd,
1754     },
1755
1756 SQMP
1757 remove-fd
1758 ---------
1759
1760 Remove a file descriptor from an fd set.
1761
1762 Arguments:
1763
1764 - "fdset-id": The ID of the fd set that the file descriptor belongs to.
1765               (json-int)
1766 - "fd": The file descriptor that is to be removed. (json-int, optional)
1767
1768 Example:
1769
1770 -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
1771 <- { "return": {} }
1772
1773 Notes:
1774
1775 (1) The list of fd sets is shared by all monitor connections.
1776 (2) If "fd" is not specified, all file descriptors in "fdset-id" will be
1777     removed.
1778
1779 EQMP
1780
1781     {
1782         .name       = "query-fdsets",
1783         .args_type  = "",
1784         .help       = "Return information describing all fd sets",
1785         .mhandler.cmd_new = qmp_marshal_input_query_fdsets,
1786     },
1787
1788 SQMP
1789 query-fdsets
1790 -------------
1791
1792 Return information describing all fd sets.
1793
1794 Arguments: None
1795
1796 Example:
1797
1798 -> { "execute": "query-fdsets" }
1799 <- { "return": [
1800        {
1801          "fds": [
1802            {
1803              "fd": 30,
1804              "opaque": "rdonly:/path/to/file"
1805            },
1806            {
1807              "fd": 24,
1808              "opaque": "rdwr:/path/to/file"
1809            }
1810          ],
1811          "fdset-id": 1
1812        },
1813        {
1814          "fds": [
1815            {
1816              "fd": 28
1817            },
1818            {
1819              "fd": 29
1820            }
1821          ],
1822          "fdset-id": 0
1823        }
1824      ]
1825    }
1826
1827 Note: The list of fd sets is shared by all monitor connections.
1828
1829 EQMP
1830
1831     {
1832         .name       = "block_passwd",
1833         .args_type  = "device:s?,node-name:s?,password:s",
1834         .mhandler.cmd_new = qmp_marshal_input_block_passwd,
1835     },
1836
1837 SQMP
1838 block_passwd
1839 ------------
1840
1841 Set the password of encrypted block devices.
1842
1843 Arguments:
1844
1845 - "device": device name (json-string)
1846 - "node-name": name in the block driver state graph (json-string)
1847 - "password": password (json-string)
1848
1849 Example:
1850
1851 -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0",
1852                                                "password": "12345" } }
1853 <- { "return": {} }
1854
1855 EQMP
1856
1857     {
1858         .name       = "block_set_io_throttle",
1859         .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,iops_size:l?,group:s?",
1860         .mhandler.cmd_new = qmp_marshal_input_block_set_io_throttle,
1861     },
1862
1863 SQMP
1864 block_set_io_throttle
1865 ------------
1866
1867 Change I/O throttle limits for a block drive.
1868
1869 Arguments:
1870
1871 - "device": device name (json-string)
1872 - "bps": total throughput limit in bytes per second (json-int)
1873 - "bps_rd": read throughput limit in bytes per second (json-int)
1874 - "bps_wr": write throughput limit in bytes per second (json-int)
1875 - "iops": total I/O operations per second (json-int)
1876 - "iops_rd": read I/O operations per second (json-int)
1877 - "iops_wr": write I/O operations per second (json-int)
1878 - "bps_max":  total max in bytes (json-int)
1879 - "bps_rd_max":  read max in bytes (json-int)
1880 - "bps_wr_max":  write max in bytes (json-int)
1881 - "iops_max":  total I/O operations max (json-int)
1882 - "iops_rd_max":  read I/O operations max (json-int)
1883 - "iops_wr_max":  write I/O operations max (json-int)
1884 - "iops_size":  I/O size in bytes when limiting (json-int)
1885 - "group": throttle group name (json-string)
1886
1887 Example:
1888
1889 -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
1890                                                "bps": 1000000,
1891                                                "bps_rd": 0,
1892                                                "bps_wr": 0,
1893                                                "iops": 0,
1894                                                "iops_rd": 0,
1895                                                "iops_wr": 0,
1896                                                "bps_max": 8000000,
1897                                                "bps_rd_max": 0,
1898                                                "bps_wr_max": 0,
1899                                                "iops_max": 0,
1900                                                "iops_rd_max": 0,
1901                                                "iops_wr_max": 0,
1902                                                "iops_size": 0 } }
1903 <- { "return": {} }
1904
1905 EQMP
1906
1907     {
1908         .name       = "set_password",
1909         .args_type  = "protocol:s,password:s,connected:s?",
1910         .mhandler.cmd_new = qmp_marshal_input_set_password,
1911     },
1912
1913 SQMP
1914 set_password
1915 ------------
1916
1917 Set the password for vnc/spice protocols.
1918
1919 Arguments:
1920
1921 - "protocol": protocol name (json-string)
1922 - "password": password (json-string)
1923 - "connected": [ keep | disconnect | fail ] (json-string, optional)
1924
1925 Example:
1926
1927 -> { "execute": "set_password", "arguments": { "protocol": "vnc",
1928                                                "password": "secret" } }
1929 <- { "return": {} }
1930
1931 EQMP
1932
1933     {
1934         .name       = "expire_password",
1935         .args_type  = "protocol:s,time:s",
1936         .mhandler.cmd_new = qmp_marshal_input_expire_password,
1937     },
1938
1939 SQMP
1940 expire_password
1941 ---------------
1942
1943 Set the password expire time for vnc/spice protocols.
1944
1945 Arguments:
1946
1947 - "protocol": protocol name (json-string)
1948 - "time": [ now | never | +secs | secs ] (json-string)
1949
1950 Example:
1951
1952 -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
1953                                                   "time": "+60" } }
1954 <- { "return": {} }
1955
1956 EQMP
1957
1958     {
1959         .name       = "add_client",
1960         .args_type  = "protocol:s,fdname:s,skipauth:b?,tls:b?",
1961         .mhandler.cmd_new = qmp_marshal_input_add_client,
1962     },
1963
1964 SQMP
1965 add_client
1966 ----------
1967
1968 Add a graphics client
1969
1970 Arguments:
1971
1972 - "protocol": protocol name (json-string)
1973 - "fdname": file descriptor name (json-string)
1974 - "skipauth": whether to skip authentication (json-bool, optional)
1975 - "tls": whether to perform TLS (json-bool, optional)
1976
1977 Example:
1978
1979 -> { "execute": "add_client", "arguments": { "protocol": "vnc",
1980                                              "fdname": "myclient" } }
1981 <- { "return": {} }
1982
1983 EQMP
1984     {
1985         .name       = "qmp_capabilities",
1986         .args_type  = "",
1987         .params     = "",
1988         .help       = "enable QMP capabilities",
1989         .mhandler.cmd_new = qmp_capabilities,
1990     },
1991
1992 SQMP
1993 qmp_capabilities
1994 ----------------
1995
1996 Enable QMP capabilities.
1997
1998 Arguments: None.
1999
2000 Example:
2001
2002 -> { "execute": "qmp_capabilities" }
2003 <- { "return": {} }
2004
2005 Note: This command must be issued before issuing any other command.
2006
2007 EQMP
2008
2009     {
2010         .name       = "human-monitor-command",
2011         .args_type  = "command-line:s,cpu-index:i?",
2012         .mhandler.cmd_new = qmp_marshal_input_human_monitor_command,
2013     },
2014
2015 SQMP
2016 human-monitor-command
2017 ---------------------
2018
2019 Execute a Human Monitor command.
2020
2021 Arguments:
2022
2023 - command-line: the command name and its arguments, just like the
2024                 Human Monitor's shell (json-string)
2025 - cpu-index: select the CPU number to be used by commands which access CPU
2026              data, like 'info registers'. The Monitor selects CPU 0 if this
2027              argument is not provided (json-int, optional)
2028
2029 Example:
2030
2031 -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } }
2032 <- { "return": "kvm support: enabled\r\n" }
2033
2034 Notes:
2035
2036 (1) The Human Monitor is NOT an stable interface, this means that command
2037     names, arguments and responses can change or be removed at ANY time.
2038     Applications that rely on long term stability guarantees should NOT
2039     use this command
2040
2041 (2) Limitations:
2042
2043     o This command is stateless, this means that commands that depend
2044       on state information (such as getfd) might not work
2045
2046     o Commands that prompt the user for data (eg. 'cont' when the block
2047       device is encrypted) don't currently work
2048
2049 3. Query Commands
2050 =================
2051
2052 HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
2053 HXCOMM this! We will possibly move query commands definitions inside those
2054 HXCOMM sections, just like regular commands.
2055
2056 EQMP
2057
2058 SQMP
2059 query-version
2060 -------------
2061
2062 Show QEMU version.
2063
2064 Return a json-object with the following information:
2065
2066 - "qemu": A json-object containing three integer values:
2067     - "major": QEMU's major version (json-int)
2068     - "minor": QEMU's minor version (json-int)
2069     - "micro": QEMU's micro version (json-int)
2070 - "package": package's version (json-string)
2071
2072 Example:
2073
2074 -> { "execute": "query-version" }
2075 <- {
2076       "return":{
2077          "qemu":{
2078             "major":0,
2079             "minor":11,
2080             "micro":5
2081          },
2082          "package":""
2083       }
2084    }
2085
2086 EQMP
2087
2088     {
2089         .name       = "query-version",
2090         .args_type  = "",
2091         .mhandler.cmd_new = qmp_marshal_input_query_version,
2092     },
2093
2094 SQMP
2095 query-commands
2096 --------------
2097
2098 List QMP available commands.
2099
2100 Each command is represented by a json-object, the returned value is a json-array
2101 of all commands.
2102
2103 Each json-object contain:
2104
2105 - "name": command's name (json-string)
2106
2107 Example:
2108
2109 -> { "execute": "query-commands" }
2110 <- {
2111       "return":[
2112          {
2113             "name":"query-balloon"
2114          },
2115          {
2116             "name":"system_powerdown"
2117          }
2118       ]
2119    }
2120
2121 Note: This example has been shortened as the real response is too long.
2122
2123 EQMP
2124
2125     {
2126         .name       = "query-commands",
2127         .args_type  = "",
2128         .mhandler.cmd_new = qmp_marshal_input_query_commands,
2129     },
2130
2131 SQMP
2132 query-events
2133 --------------
2134
2135 List QMP available events.
2136
2137 Each event is represented by a json-object, the returned value is a json-array
2138 of all events.
2139
2140 Each json-object contains:
2141
2142 - "name": event's name (json-string)
2143
2144 Example:
2145
2146 -> { "execute": "query-events" }
2147 <- {
2148       "return":[
2149          {
2150             "name":"SHUTDOWN"
2151          },
2152          {
2153             "name":"RESET"
2154          }
2155       ]
2156    }
2157
2158 Note: This example has been shortened as the real response is too long.
2159
2160 EQMP
2161
2162     {
2163         .name       = "query-events",
2164         .args_type  = "",
2165         .mhandler.cmd_new = qmp_marshal_input_query_events,
2166     },
2167
2168 SQMP
2169 query-chardev
2170 -------------
2171
2172 Each device is represented by a json-object. The returned value is a json-array
2173 of all devices.
2174
2175 Each json-object contain the following:
2176
2177 - "label": device's label (json-string)
2178 - "filename": device's file (json-string)
2179 - "frontend-open": open/closed state of the frontend device attached to this
2180                    backend (json-bool)
2181
2182 Example:
2183
2184 -> { "execute": "query-chardev" }
2185 <- {
2186       "return": [
2187          {
2188             "label": "charchannel0",
2189             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.agent,server",
2190             "frontend-open": false
2191          },
2192          {
2193             "label": "charmonitor",
2194             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.monitor,server",
2195             "frontend-open": true
2196          },
2197          {
2198             "label": "charserial0",
2199             "filename": "pty:/dev/pts/2",
2200             "frontend-open": true
2201          }
2202       ]
2203    }
2204
2205 EQMP
2206
2207     {
2208         .name       = "query-chardev",
2209         .args_type  = "",
2210         .mhandler.cmd_new = qmp_marshal_input_query_chardev,
2211     },
2212
2213 SQMP
2214 query-chardev-backends
2215 -------------
2216
2217 List available character device backends.
2218
2219 Each backend is represented by a json-object, the returned value is a json-array
2220 of all backends.
2221
2222 Each json-object contains:
2223
2224 - "name": backend name (json-string)
2225
2226 Example:
2227
2228 -> { "execute": "query-chardev-backends" }
2229 <- {
2230       "return":[
2231          {
2232             "name":"udp"
2233          },
2234          {
2235             "name":"tcp"
2236          },
2237          {
2238             "name":"unix"
2239          },
2240          {
2241             "name":"spiceport"
2242          }
2243       ]
2244    }
2245
2246 EQMP
2247
2248     {
2249         .name       = "query-chardev-backends",
2250         .args_type  = "",
2251         .mhandler.cmd_new = qmp_marshal_input_query_chardev_backends,
2252     },
2253
2254 SQMP
2255 query-block
2256 -----------
2257
2258 Show the block devices.
2259
2260 Each block device information is stored in a json-object and the returned value
2261 is a json-array of all devices.
2262
2263 Each json-object contain the following:
2264
2265 - "device": device name (json-string)
2266 - "type": device type (json-string)
2267          - deprecated, retained for backward compatibility
2268          - Possible values: "unknown"
2269 - "removable": true if the device is removable, false otherwise (json-bool)
2270 - "locked": true if the device is locked, false otherwise (json-bool)
2271 - "tray_open": only present if removable, true if the device has a tray,
2272                and it is open (json-bool)
2273 - "inserted": only present if the device is inserted, it is a json-object
2274    containing the following:
2275          - "file": device file name (json-string)
2276          - "ro": true if read-only, false otherwise (json-bool)
2277          - "drv": driver format name (json-string)
2278              - Possible values: "blkdebug", "bochs", "cloop", "dmg",
2279                                 "file", "file", "ftp", "ftps", "host_cdrom",
2280                                 "host_device", "http", "https",
2281                                 "nbd", "parallels", "qcow", "qcow2", "raw",
2282                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
2283          - "backing_file": backing file name (json-string, optional)
2284          - "backing_file_depth": number of files in the backing file chain (json-int)
2285          - "encrypted": true if encrypted, false otherwise (json-bool)
2286          - "bps": limit total bytes per second (json-int)
2287          - "bps_rd": limit read bytes per second (json-int)
2288          - "bps_wr": limit write bytes per second (json-int)
2289          - "iops": limit total I/O operations per second (json-int)
2290          - "iops_rd": limit read operations per second (json-int)
2291          - "iops_wr": limit write operations per second (json-int)
2292          - "bps_max":  total max in bytes (json-int)
2293          - "bps_rd_max":  read max in bytes (json-int)
2294          - "bps_wr_max":  write max in bytes (json-int)
2295          - "iops_max":  total I/O operations max (json-int)
2296          - "iops_rd_max":  read I/O operations max (json-int)
2297          - "iops_wr_max":  write I/O operations max (json-int)
2298          - "iops_size": I/O size when limiting by iops (json-int)
2299          - "detect_zeroes": detect and optimize zero writing (json-string)
2300              - Possible values: "off", "on", "unmap"
2301          - "write_threshold": write offset threshold in bytes, a event will be
2302                               emitted if crossed. Zero if disabled (json-int)
2303          - "image": the detail of the image, it is a json-object containing
2304             the following:
2305              - "filename": image file name (json-string)
2306              - "format": image format (json-string)
2307              - "virtual-size": image capacity in bytes (json-int)
2308              - "dirty-flag": true if image is not cleanly closed, not present
2309                              means clean (json-bool, optional)
2310              - "actual-size": actual size on disk in bytes of the image, not
2311                               present when image does not support thin
2312                               provision (json-int, optional)
2313              - "cluster-size": size of a cluster in bytes, not present if image
2314                                format does not support it (json-int, optional)
2315              - "encrypted": true if the image is encrypted, not present means
2316                             false or the image format does not support
2317                             encryption (json-bool, optional)
2318              - "backing_file": backing file name, not present means no backing
2319                                file is used or the image format does not
2320                                support backing file chain
2321                                (json-string, optional)
2322              - "full-backing-filename": full path of the backing file, not
2323                                         present if it equals backing_file or no
2324                                         backing file is used
2325                                         (json-string, optional)
2326              - "backing-filename-format": the format of the backing file, not
2327                                           present means unknown or no backing
2328                                           file (json-string, optional)
2329              - "snapshots": the internal snapshot info, it is an optional list
2330                 of json-object containing the following:
2331                  - "id": unique snapshot id (json-string)
2332                  - "name": snapshot name (json-string)
2333                  - "vm-state-size": size of the VM state in bytes (json-int)
2334                  - "date-sec": UTC date of the snapshot in seconds (json-int)
2335                  - "date-nsec": fractional part in nanoseconds to be used with
2336                                 date-sec (json-int)
2337                  - "vm-clock-sec": VM clock relative to boot in seconds
2338                                    (json-int)
2339                  - "vm-clock-nsec": fractional part in nanoseconds to be used
2340                                     with vm-clock-sec (json-int)
2341              - "backing-image": the detail of the backing image, it is an
2342                                 optional json-object only present when a
2343                                 backing image present for this image
2344
2345 - "io-status": I/O operation status, only present if the device supports it
2346                and the VM is configured to stop on errors. It's always reset
2347                to "ok" when the "cont" command is issued (json_string, optional)
2348              - Possible values: "ok", "failed", "nospace"
2349
2350 Example:
2351
2352 -> { "execute": "query-block" }
2353 <- {
2354       "return":[
2355          {
2356             "io-status": "ok",
2357             "device":"ide0-hd0",
2358             "locked":false,
2359             "removable":false,
2360             "inserted":{
2361                "ro":false,
2362                "drv":"qcow2",
2363                "encrypted":false,
2364                "file":"disks/test.qcow2",
2365                "backing_file_depth":1,
2366                "bps":1000000,
2367                "bps_rd":0,
2368                "bps_wr":0,
2369                "iops":1000000,
2370                "iops_rd":0,
2371                "iops_wr":0,
2372                "bps_max": 8000000,
2373                "bps_rd_max": 0,
2374                "bps_wr_max": 0,
2375                "iops_max": 0,
2376                "iops_rd_max": 0,
2377                "iops_wr_max": 0,
2378                "iops_size": 0,
2379                "detect_zeroes": "on",
2380                "write_threshold": 0,
2381                "image":{
2382                   "filename":"disks/test.qcow2",
2383                   "format":"qcow2",
2384                   "virtual-size":2048000,
2385                   "backing_file":"base.qcow2",
2386                   "full-backing-filename":"disks/base.qcow2",
2387                   "backing-filename-format":"qcow2",
2388                   "snapshots":[
2389                      {
2390                         "id": "1",
2391                         "name": "snapshot1",
2392                         "vm-state-size": 0,
2393                         "date-sec": 10000200,
2394                         "date-nsec": 12,
2395                         "vm-clock-sec": 206,
2396                         "vm-clock-nsec": 30
2397                      }
2398                   ],
2399                   "backing-image":{
2400                       "filename":"disks/base.qcow2",
2401                       "format":"qcow2",
2402                       "virtual-size":2048000
2403                   }
2404                }
2405             },
2406             "type":"unknown"
2407          },
2408          {
2409             "io-status": "ok",
2410             "device":"ide1-cd0",
2411             "locked":false,
2412             "removable":true,
2413             "type":"unknown"
2414          },
2415          {
2416             "device":"floppy0",
2417             "locked":false,
2418             "removable":true,
2419             "type":"unknown"
2420          },
2421          {
2422             "device":"sd0",
2423             "locked":false,
2424             "removable":true,
2425             "type":"unknown"
2426          }
2427       ]
2428    }
2429
2430 EQMP
2431
2432     {
2433         .name       = "query-block",
2434         .args_type  = "",
2435         .mhandler.cmd_new = qmp_marshal_input_query_block,
2436     },
2437
2438 SQMP
2439 query-blockstats
2440 ----------------
2441
2442 Show block device statistics.
2443
2444 Each device statistic information is stored in a json-object and the returned
2445 value is a json-array of all devices.
2446
2447 Each json-object contain the following:
2448
2449 - "device": device name (json-string)
2450 - "stats": A json-object with the statistics information, it contains:
2451     - "rd_bytes": bytes read (json-int)
2452     - "wr_bytes": bytes written (json-int)
2453     - "rd_operations": read operations (json-int)
2454     - "wr_operations": write operations (json-int)
2455     - "flush_operations": cache flush operations (json-int)
2456     - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int)
2457     - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int)
2458     - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int)
2459     - "wr_highest_offset": Highest offset of a sector written since the
2460                            BlockDriverState has been opened (json-int)
2461     - "rd_merged": number of read requests that have been merged into
2462                    another request (json-int)
2463     - "wr_merged": number of write requests that have been merged into
2464                    another request (json-int)
2465 - "parent": Contains recursively the statistics of the underlying
2466             protocol (e.g. the host file for a qcow2 image). If there is
2467             no underlying protocol, this field is omitted
2468             (json-object, optional)
2469
2470 Example:
2471
2472 -> { "execute": "query-blockstats" }
2473 <- {
2474       "return":[
2475          {
2476             "device":"ide0-hd0",
2477             "parent":{
2478                "stats":{
2479                   "wr_highest_offset":3686448128,
2480                   "wr_bytes":9786368,
2481                   "wr_operations":751,
2482                   "rd_bytes":122567168,
2483                   "rd_operations":36772
2484                   "wr_total_times_ns":313253456
2485                   "rd_total_times_ns":3465673657
2486                   "flush_total_times_ns":49653
2487                   "flush_operations":61,
2488                   "rd_merged":0,
2489                   "wr_merged":0
2490                }
2491             },
2492             "stats":{
2493                "wr_highest_offset":2821110784,
2494                "wr_bytes":9786368,
2495                "wr_operations":692,
2496                "rd_bytes":122739200,
2497                "rd_operations":36604
2498                "flush_operations":51,
2499                "wr_total_times_ns":313253456
2500                "rd_total_times_ns":3465673657
2501                "flush_total_times_ns":49653,
2502                "rd_merged":0,
2503                "wr_merged":0
2504             }
2505          },
2506          {
2507             "device":"ide1-cd0",
2508             "stats":{
2509                "wr_highest_offset":0,
2510                "wr_bytes":0,
2511                "wr_operations":0,
2512                "rd_bytes":0,
2513                "rd_operations":0
2514                "flush_operations":0,
2515                "wr_total_times_ns":0
2516                "rd_total_times_ns":0
2517                "flush_total_times_ns":0,
2518                "rd_merged":0,
2519                "wr_merged":0
2520             }
2521          },
2522          {
2523             "device":"floppy0",
2524             "stats":{
2525                "wr_highest_offset":0,
2526                "wr_bytes":0,
2527                "wr_operations":0,
2528                "rd_bytes":0,
2529                "rd_operations":0
2530                "flush_operations":0,
2531                "wr_total_times_ns":0
2532                "rd_total_times_ns":0
2533                "flush_total_times_ns":0,
2534                "rd_merged":0,
2535                "wr_merged":0
2536             }
2537          },
2538          {
2539             "device":"sd0",
2540             "stats":{
2541                "wr_highest_offset":0,
2542                "wr_bytes":0,
2543                "wr_operations":0,
2544                "rd_bytes":0,
2545                "rd_operations":0
2546                "flush_operations":0,
2547                "wr_total_times_ns":0
2548                "rd_total_times_ns":0
2549                "flush_total_times_ns":0,
2550                "rd_merged":0,
2551                "wr_merged":0
2552             }
2553          }
2554       ]
2555    }
2556
2557 EQMP
2558
2559     {
2560         .name       = "query-blockstats",
2561         .args_type  = "query-nodes:b?",
2562         .mhandler.cmd_new = qmp_marshal_input_query_blockstats,
2563     },
2564
2565 SQMP
2566 query-cpus
2567 ----------
2568
2569 Show CPU information.
2570
2571 Return a json-array. Each CPU is represented by a json-object, which contains:
2572
2573 - "CPU": CPU index (json-int)
2574 - "current": true if this is the current CPU, false otherwise (json-bool)
2575 - "halted": true if the cpu is halted, false otherwise (json-bool)
2576 - "qom_path": path to the CPU object in the QOM tree (json-str)
2577 - Current program counter. The key's name depends on the architecture:
2578      "pc": i386/x86_64 (json-int)
2579      "nip": PPC (json-int)
2580      "pc" and "npc": sparc (json-int)
2581      "PC": mips (json-int)
2582 - "thread_id": ID of the underlying host thread (json-int)
2583
2584 Example:
2585
2586 -> { "execute": "query-cpus" }
2587 <- {
2588       "return":[
2589          {
2590             "CPU":0,
2591             "current":true,
2592             "halted":false,
2593             "qom_path":"/machine/unattached/device[0]",
2594             "pc":3227107138,
2595             "thread_id":3134
2596          },
2597          {
2598             "CPU":1,
2599             "current":false,
2600             "halted":true,
2601             "qom_path":"/machine/unattached/device[2]",
2602             "pc":7108165,
2603             "thread_id":3135
2604          }
2605       ]
2606    }
2607
2608 EQMP
2609
2610     {
2611         .name       = "query-cpus",
2612         .args_type  = "",
2613         .mhandler.cmd_new = qmp_marshal_input_query_cpus,
2614     },
2615
2616 SQMP
2617 query-iothreads
2618 ---------------
2619
2620 Returns a list of information about each iothread.
2621
2622 Note this list excludes the QEMU main loop thread, which is not declared
2623 using the -object iothread command-line option.  It is always the main thread
2624 of the process.
2625
2626 Return a json-array. Each iothread is represented by a json-object, which contains:
2627
2628 - "id": name of iothread (json-str)
2629 - "thread-id": ID of the underlying host thread (json-int)
2630
2631 Example:
2632
2633 -> { "execute": "query-iothreads" }
2634 <- {
2635       "return":[
2636          {
2637             "id":"iothread0",
2638             "thread-id":3134
2639          },
2640          {
2641             "id":"iothread1",
2642             "thread-id":3135
2643          }
2644       ]
2645    }
2646
2647 EQMP
2648
2649     {
2650         .name       = "query-iothreads",
2651         .args_type  = "",
2652         .mhandler.cmd_new = qmp_marshal_input_query_iothreads,
2653     },
2654
2655 SQMP
2656 query-pci
2657 ---------
2658
2659 PCI buses and devices information.
2660
2661 The returned value is a json-array of all buses. Each bus is represented by
2662 a json-object, which has a key with a json-array of all PCI devices attached
2663 to it. Each device is represented by a json-object.
2664
2665 The bus json-object contains the following:
2666
2667 - "bus": bus number (json-int)
2668 - "devices": a json-array of json-objects, each json-object represents a
2669              PCI device
2670
2671 The PCI device json-object contains the following:
2672
2673 - "bus": identical to the parent's bus number (json-int)
2674 - "slot": slot number (json-int)
2675 - "function": function number (json-int)
2676 - "class_info": a json-object containing:
2677      - "desc": device class description (json-string, optional)
2678      - "class": device class number (json-int)
2679 - "id": a json-object containing:
2680      - "device": device ID (json-int)
2681      - "vendor": vendor ID (json-int)
2682 - "irq": device's IRQ if assigned (json-int, optional)
2683 - "qdev_id": qdev id string (json-string)
2684 - "pci_bridge": It's a json-object, only present if this device is a
2685                 PCI bridge, contains:
2686      - "bus": bus number (json-int)
2687      - "secondary": secondary bus number (json-int)
2688      - "subordinate": subordinate bus number (json-int)
2689      - "io_range": I/O memory range information, a json-object with the
2690                    following members:
2691                  - "base": base address, in bytes (json-int)
2692                  - "limit": limit address, in bytes (json-int)
2693      - "memory_range": memory range information, a json-object with the
2694                        following members:
2695                  - "base": base address, in bytes (json-int)
2696                  - "limit": limit address, in bytes (json-int)
2697      - "prefetchable_range": Prefetchable memory range information, a
2698                              json-object with the following members:
2699                  - "base": base address, in bytes (json-int)
2700                  - "limit": limit address, in bytes (json-int)
2701      - "devices": a json-array of PCI devices if there's any attached, each
2702                   each element is represented by a json-object, which contains
2703                   the same members of the 'PCI device json-object' described
2704                   above (optional)
2705 - "regions": a json-array of json-objects, each json-object represents a
2706              memory region of this device
2707
2708 The memory range json-object contains the following:
2709
2710 - "base": base memory address (json-int)
2711 - "limit": limit value (json-int)
2712
2713 The region json-object can be an I/O region or a memory region, an I/O region
2714 json-object contains the following:
2715
2716 - "type": "io" (json-string, fixed)
2717 - "bar": BAR number (json-int)
2718 - "address": memory address (json-int)
2719 - "size": memory size (json-int)
2720
2721 A memory region json-object contains the following:
2722
2723 - "type": "memory" (json-string, fixed)
2724 - "bar": BAR number (json-int)
2725 - "address": memory address (json-int)
2726 - "size": memory size (json-int)
2727 - "mem_type_64": true or false (json-bool)
2728 - "prefetch": true or false (json-bool)
2729
2730 Example:
2731
2732 -> { "execute": "query-pci" }
2733 <- {
2734       "return":[
2735          {
2736             "bus":0,
2737             "devices":[
2738                {
2739                   "bus":0,
2740                   "qdev_id":"",
2741                   "slot":0,
2742                   "class_info":{
2743                      "class":1536,
2744                      "desc":"Host bridge"
2745                   },
2746                   "id":{
2747                      "device":32902,
2748                      "vendor":4663
2749                   },
2750                   "function":0,
2751                   "regions":[
2752
2753                   ]
2754                },
2755                {
2756                   "bus":0,
2757                   "qdev_id":"",
2758                   "slot":1,
2759                   "class_info":{
2760                      "class":1537,
2761                      "desc":"ISA bridge"
2762                   },
2763                   "id":{
2764                      "device":32902,
2765                      "vendor":28672
2766                   },
2767                   "function":0,
2768                   "regions":[
2769
2770                   ]
2771                },
2772                {
2773                   "bus":0,
2774                   "qdev_id":"",
2775                   "slot":1,
2776                   "class_info":{
2777                      "class":257,
2778                      "desc":"IDE controller"
2779                   },
2780                   "id":{
2781                      "device":32902,
2782                      "vendor":28688
2783                   },
2784                   "function":1,
2785                   "regions":[
2786                      {
2787                         "bar":4,
2788                         "size":16,
2789                         "address":49152,
2790                         "type":"io"
2791                      }
2792                   ]
2793                },
2794                {
2795                   "bus":0,
2796                   "qdev_id":"",
2797                   "slot":2,
2798                   "class_info":{
2799                      "class":768,
2800                      "desc":"VGA controller"
2801                   },
2802                   "id":{
2803                      "device":4115,
2804                      "vendor":184
2805                   },
2806                   "function":0,
2807                   "regions":[
2808                      {
2809                         "prefetch":true,
2810                         "mem_type_64":false,
2811                         "bar":0,
2812                         "size":33554432,
2813                         "address":4026531840,
2814                         "type":"memory"
2815                      },
2816                      {
2817                         "prefetch":false,
2818                         "mem_type_64":false,
2819                         "bar":1,
2820                         "size":4096,
2821                         "address":4060086272,
2822                         "type":"memory"
2823                      },
2824                      {
2825                         "prefetch":false,
2826                         "mem_type_64":false,
2827                         "bar":6,
2828                         "size":65536,
2829                         "address":-1,
2830                         "type":"memory"
2831                      }
2832                   ]
2833                },
2834                {
2835                   "bus":0,
2836                   "qdev_id":"",
2837                   "irq":11,
2838                   "slot":4,
2839                   "class_info":{
2840                      "class":1280,
2841                      "desc":"RAM controller"
2842                   },
2843                   "id":{
2844                      "device":6900,
2845                      "vendor":4098
2846                   },
2847                   "function":0,
2848                   "regions":[
2849                      {
2850                         "bar":0,
2851                         "size":32,
2852                         "address":49280,
2853                         "type":"io"
2854                      }
2855                   ]
2856                }
2857             ]
2858          }
2859       ]
2860    }
2861
2862 Note: This example has been shortened as the real response is too long.
2863
2864 EQMP
2865
2866     {
2867         .name       = "query-pci",
2868         .args_type  = "",
2869         .mhandler.cmd_new = qmp_marshal_input_query_pci,
2870     },
2871
2872 SQMP
2873 query-kvm
2874 ---------
2875
2876 Show KVM information.
2877
2878 Return a json-object with the following information:
2879
2880 - "enabled": true if KVM support is enabled, false otherwise (json-bool)
2881 - "present": true if QEMU has KVM support, false otherwise (json-bool)
2882
2883 Example:
2884
2885 -> { "execute": "query-kvm" }
2886 <- { "return": { "enabled": true, "present": true } }
2887
2888 EQMP
2889
2890     {
2891         .name       = "query-kvm",
2892         .args_type  = "",
2893         .mhandler.cmd_new = qmp_marshal_input_query_kvm,
2894     },
2895
2896 SQMP
2897 query-status
2898 ------------
2899
2900 Return a json-object with the following information:
2901
2902 - "running": true if the VM is running, or false if it is paused (json-bool)
2903 - "singlestep": true if the VM is in single step mode,
2904                 false otherwise (json-bool)
2905 - "status": one of the following values (json-string)
2906     "debug" - QEMU is running on a debugger
2907     "inmigrate" - guest is paused waiting for an incoming migration
2908     "internal-error" - An internal error that prevents further guest
2909     execution has occurred
2910     "io-error" - the last IOP has failed and the device is configured
2911     to pause on I/O errors
2912     "paused" - guest has been paused via the 'stop' command
2913     "postmigrate" - guest is paused following a successful 'migrate'
2914     "prelaunch" - QEMU was started with -S and guest has not started
2915     "finish-migrate" - guest is paused to finish the migration process
2916     "restore-vm" - guest is paused to restore VM state
2917     "running" - guest is actively running
2918     "save-vm" - guest is paused to save the VM state
2919     "shutdown" - guest is shut down (and -no-shutdown is in use)
2920     "watchdog" - the watchdog action is configured to pause and
2921      has been triggered
2922
2923 Example:
2924
2925 -> { "execute": "query-status" }
2926 <- { "return": { "running": true, "singlestep": false, "status": "running" } }
2927
2928 EQMP
2929
2930     {
2931         .name       = "query-status",
2932         .args_type  = "",
2933         .mhandler.cmd_new = qmp_marshal_input_query_status,
2934     },
2935
2936 SQMP
2937 query-mice
2938 ----------
2939
2940 Show VM mice information.
2941
2942 Each mouse is represented by a json-object, the returned value is a json-array
2943 of all mice.
2944
2945 The mouse json-object contains the following:
2946
2947 - "name": mouse's name (json-string)
2948 - "index": mouse's index (json-int)
2949 - "current": true if this mouse is receiving events, false otherwise (json-bool)
2950 - "absolute": true if the mouse generates absolute input events (json-bool)
2951
2952 Example:
2953
2954 -> { "execute": "query-mice" }
2955 <- {
2956       "return":[
2957          {
2958             "name":"QEMU Microsoft Mouse",
2959             "index":0,
2960             "current":false,
2961             "absolute":false
2962          },
2963          {
2964             "name":"QEMU PS/2 Mouse",
2965             "index":1,
2966             "current":true,
2967             "absolute":true
2968          }
2969       ]
2970    }
2971
2972 EQMP
2973
2974     {
2975         .name       = "query-mice",
2976         .args_type  = "",
2977         .mhandler.cmd_new = qmp_marshal_input_query_mice,
2978     },
2979
2980 SQMP
2981 query-vnc
2982 ---------
2983
2984 Show VNC server information.
2985
2986 Return a json-object with server information. Connected clients are returned
2987 as a json-array of json-objects.
2988
2989 The main json-object contains the following:
2990
2991 - "enabled": true or false (json-bool)
2992 - "host": server's IP address (json-string)
2993 - "family": address family (json-string)
2994          - Possible values: "ipv4", "ipv6", "unix", "unknown"
2995 - "service": server's port number (json-string)
2996 - "auth": authentication method (json-string)
2997          - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight",
2998                             "tls", "ultra", "unknown", "vencrypt", "vencrypt",
2999                             "vencrypt+plain", "vencrypt+tls+none",
3000                             "vencrypt+tls+plain", "vencrypt+tls+sasl",
3001                             "vencrypt+tls+vnc", "vencrypt+x509+none",
3002                             "vencrypt+x509+plain", "vencrypt+x509+sasl",
3003                             "vencrypt+x509+vnc", "vnc"
3004 - "clients": a json-array of all connected clients
3005
3006 Clients are described by a json-object, each one contain the following:
3007
3008 - "host": client's IP address (json-string)
3009 - "family": address family (json-string)
3010          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3011 - "service": client's port number (json-string)
3012 - "x509_dname": TLS dname (json-string, optional)
3013 - "sasl_username": SASL username (json-string, optional)
3014
3015 Example:
3016
3017 -> { "execute": "query-vnc" }
3018 <- {
3019       "return":{
3020          "enabled":true,
3021          "host":"0.0.0.0",
3022          "service":"50402",
3023          "auth":"vnc",
3024          "family":"ipv4",
3025          "clients":[
3026             {
3027                "host":"127.0.0.1",
3028                "service":"50401",
3029                "family":"ipv4"
3030             }
3031          ]
3032       }
3033    }
3034
3035 EQMP
3036
3037     {
3038         .name       = "query-vnc",
3039         .args_type  = "",
3040         .mhandler.cmd_new = qmp_marshal_input_query_vnc,
3041     },
3042     {
3043         .name       = "query-vnc-servers",
3044         .args_type  = "",
3045         .mhandler.cmd_new = qmp_marshal_input_query_vnc_servers,
3046     },
3047
3048 SQMP
3049 query-spice
3050 -----------
3051
3052 Show SPICE server information.
3053
3054 Return a json-object with server information. Connected clients are returned
3055 as a json-array of json-objects.
3056
3057 The main json-object contains the following:
3058
3059 - "enabled": true or false (json-bool)
3060 - "host": server's IP address (json-string)
3061 - "port": server's port number (json-int, optional)
3062 - "tls-port": server's port number (json-int, optional)
3063 - "auth": authentication method (json-string)
3064          - Possible values: "none", "spice"
3065 - "channels": a json-array of all active channels clients
3066
3067 Channels are described by a json-object, each one contain the following:
3068
3069 - "host": client's IP address (json-string)
3070 - "family": address family (json-string)
3071          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3072 - "port": client's port number (json-string)
3073 - "connection-id": spice connection id.  All channels with the same id
3074                    belong to the same spice session (json-int)
3075 - "channel-type": channel type.  "1" is the main control channel, filter for
3076                   this one if you want track spice sessions only (json-int)
3077 - "channel-id": channel id.  Usually "0", might be different needed when
3078                 multiple channels of the same type exist, such as multiple
3079                 display channels in a multihead setup (json-int)
3080 - "tls": whether the channel is encrypted (json-bool)
3081
3082 Example:
3083
3084 -> { "execute": "query-spice" }
3085 <- {
3086       "return": {
3087          "enabled": true,
3088          "auth": "spice",
3089          "port": 5920,
3090          "tls-port": 5921,
3091          "host": "0.0.0.0",
3092          "channels": [
3093             {
3094                "port": "54924",
3095                "family": "ipv4",
3096                "channel-type": 1,
3097                "connection-id": 1804289383,
3098                "host": "127.0.0.1",
3099                "channel-id": 0,
3100                "tls": true
3101             },
3102             {
3103                "port": "36710",
3104                "family": "ipv4",
3105                "channel-type": 4,
3106                "connection-id": 1804289383,
3107                "host": "127.0.0.1",
3108                "channel-id": 0,
3109                "tls": false
3110             },
3111             [ ... more channels follow ... ]
3112          ]
3113       }
3114    }
3115
3116 EQMP
3117
3118 #if defined(CONFIG_SPICE)
3119     {
3120         .name       = "query-spice",
3121         .args_type  = "",
3122         .mhandler.cmd_new = qmp_marshal_input_query_spice,
3123     },
3124 #endif
3125
3126 SQMP
3127 query-name
3128 ----------
3129
3130 Show VM name.
3131
3132 Return a json-object with the following information:
3133
3134 - "name": VM's name (json-string, optional)
3135
3136 Example:
3137
3138 -> { "execute": "query-name" }
3139 <- { "return": { "name": "qemu-name" } }
3140
3141 EQMP
3142
3143     {
3144         .name       = "query-name",
3145         .args_type  = "",
3146         .mhandler.cmd_new = qmp_marshal_input_query_name,
3147     },
3148
3149 SQMP
3150 query-uuid
3151 ----------
3152
3153 Show VM UUID.
3154
3155 Return a json-object with the following information:
3156
3157 - "UUID": Universally Unique Identifier (json-string)
3158
3159 Example:
3160
3161 -> { "execute": "query-uuid" }
3162 <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
3163
3164 EQMP
3165
3166     {
3167         .name       = "query-uuid",
3168         .args_type  = "",
3169         .mhandler.cmd_new = qmp_marshal_input_query_uuid,
3170     },
3171
3172 SQMP
3173 query-command-line-options
3174 --------------------------
3175
3176 Show command line option schema.
3177
3178 Return a json-array of command line option schema for all options (or for
3179 the given option), returning an error if the given option doesn't exist.
3180
3181 Each array entry contains the following:
3182
3183 - "option": option name (json-string)
3184 - "parameters": a json-array describes all parameters of the option:
3185     - "name": parameter name (json-string)
3186     - "type": parameter type (one of 'string', 'boolean', 'number',
3187               or 'size')
3188     - "help": human readable description of the parameter
3189               (json-string, optional)
3190     - "default": default value string for the parameter
3191                  (json-string, optional)
3192
3193 Example:
3194
3195 -> { "execute": "query-command-line-options", "arguments": { "option": "option-rom" } }
3196 <- { "return": [
3197         {
3198             "parameters": [
3199                 {
3200                     "name": "romfile",
3201                     "type": "string"
3202                 },
3203                 {
3204                     "name": "bootindex",
3205                     "type": "number"
3206                 }
3207             ],
3208             "option": "option-rom"
3209         }
3210      ]
3211    }
3212
3213 EQMP
3214
3215     {
3216         .name       = "query-command-line-options",
3217         .args_type  = "option:s?",
3218         .mhandler.cmd_new = qmp_marshal_input_query_command_line_options,
3219     },
3220
3221 SQMP
3222 query-migrate
3223 -------------
3224
3225 Migration status.
3226
3227 Return a json-object. If migration is active there will be another json-object
3228 with RAM migration status and if block migration is active another one with
3229 block migration status.
3230
3231 The main json-object contains the following:
3232
3233 - "status": migration status (json-string)
3234      - Possible values: "setup", "active", "completed", "failed", "cancelled"
3235 - "total-time": total amount of ms since migration started.  If
3236                 migration has ended, it returns the total migration
3237                 time (json-int)
3238 - "setup-time" amount of setup time in milliseconds _before_ the
3239                iterations begin but _after_ the QMP command is issued.
3240                This is designed to provide an accounting of any activities
3241                (such as RDMA pinning) which may be expensive, but do not
3242                actually occur during the iterative migration rounds
3243                themselves. (json-int)
3244 - "downtime": only present when migration has finished correctly
3245               total amount in ms for downtime that happened (json-int)
3246 - "expected-downtime": only present while migration is active
3247                 total amount in ms for downtime that was calculated on
3248                 the last bitmap round (json-int)
3249 - "ram": only present if "status" is "active", it is a json-object with the
3250   following RAM information:
3251          - "transferred": amount transferred in bytes (json-int)
3252          - "remaining": amount remaining to transfer in bytes (json-int)
3253          - "total": total amount of memory in bytes (json-int)
3254          - "duplicate": number of pages filled entirely with the same
3255             byte (json-int)
3256             These are sent over the wire much more efficiently.
3257          - "skipped": number of skipped zero pages (json-int)
3258          - "normal" : number of whole pages transferred.  I.e. they
3259             were not sent as duplicate or xbzrle pages (json-int)
3260          - "normal-bytes" : number of bytes transferred in whole
3261             pages. This is just normal pages times size of one page,
3262             but this way upper levels don't need to care about page
3263             size (json-int)
3264          - "dirty-sync-count": times that dirty ram was synchronized (json-int)
3265 - "disk": only present if "status" is "active" and it is a block migration,
3266   it is a json-object with the following disk information:
3267          - "transferred": amount transferred in bytes (json-int)
3268          - "remaining": amount remaining to transfer in bytes json-int)
3269          - "total": total disk size in bytes (json-int)
3270 - "xbzrle-cache": only present if XBZRLE is active.
3271   It is a json-object with the following XBZRLE information:
3272          - "cache-size": XBZRLE cache size in bytes
3273          - "bytes": number of bytes transferred for XBZRLE compressed pages
3274          - "pages": number of XBZRLE compressed pages
3275          - "cache-miss": number of XBRZRLE page cache misses
3276          - "cache-miss-rate": rate of XBRZRLE page cache misses
3277          - "overflow": number of times XBZRLE overflows.  This means
3278            that the XBZRLE encoding was bigger than just sent the
3279            whole page, and then we sent the whole page instead (as as
3280            normal page).
3281
3282 Examples:
3283
3284 1. Before the first migration
3285
3286 -> { "execute": "query-migrate" }
3287 <- { "return": {} }
3288
3289 2. Migration is done and has succeeded
3290
3291 -> { "execute": "query-migrate" }
3292 <- { "return": {
3293         "status": "completed",
3294         "ram":{
3295           "transferred":123,
3296           "remaining":123,
3297           "total":246,
3298           "total-time":12345,
3299           "setup-time":12345,
3300           "downtime":12345,
3301           "duplicate":123,
3302           "normal":123,
3303           "normal-bytes":123456,
3304           "dirty-sync-count":15
3305         }
3306      }
3307    }
3308
3309 3. Migration is done and has failed
3310
3311 -> { "execute": "query-migrate" }
3312 <- { "return": { "status": "failed" } }
3313
3314 4. Migration is being performed and is not a block migration:
3315
3316 -> { "execute": "query-migrate" }
3317 <- {
3318       "return":{
3319          "status":"active",
3320          "ram":{
3321             "transferred":123,
3322             "remaining":123,
3323             "total":246,
3324             "total-time":12345,
3325             "setup-time":12345,
3326             "expected-downtime":12345,
3327             "duplicate":123,
3328             "normal":123,
3329             "normal-bytes":123456,
3330             "dirty-sync-count":15
3331          }
3332       }
3333    }
3334
3335 5. Migration is being performed and is a block migration:
3336
3337 -> { "execute": "query-migrate" }
3338 <- {
3339       "return":{
3340          "status":"active",
3341          "ram":{
3342             "total":1057024,
3343             "remaining":1053304,
3344             "transferred":3720,
3345             "total-time":12345,
3346             "setup-time":12345,
3347             "expected-downtime":12345,
3348             "duplicate":123,
3349             "normal":123,
3350             "normal-bytes":123456,
3351             "dirty-sync-count":15
3352          },
3353          "disk":{
3354             "total":20971520,
3355             "remaining":20880384,
3356             "transferred":91136
3357          }
3358       }
3359    }
3360
3361 6. Migration is being performed and XBZRLE is active:
3362
3363 -> { "execute": "query-migrate" }
3364 <- {
3365       "return":{
3366          "status":"active",
3367          "capabilities" : [ { "capability": "xbzrle", "state" : true } ],
3368          "ram":{
3369             "total":1057024,
3370             "remaining":1053304,
3371             "transferred":3720,
3372             "total-time":12345,
3373             "setup-time":12345,
3374             "expected-downtime":12345,
3375             "duplicate":10,
3376             "normal":3333,
3377             "normal-bytes":3412992,
3378             "dirty-sync-count":15
3379          },
3380          "xbzrle-cache":{
3381             "cache-size":67108864,
3382             "bytes":20971520,
3383             "pages":2444343,
3384             "cache-miss":2244,
3385             "cache-miss-rate":0.123,
3386             "overflow":34434
3387          }
3388       }
3389    }
3390
3391 EQMP
3392
3393     {
3394         .name       = "query-migrate",
3395         .args_type  = "",
3396         .mhandler.cmd_new = qmp_marshal_input_query_migrate,
3397     },
3398
3399 SQMP
3400 migrate-set-capabilities
3401 ------------------------
3402
3403 Enable/Disable migration capabilities
3404
3405 - "xbzrle": XBZRLE support
3406 - "rdma-pin-all": pin all pages when using RDMA during migration
3407 - "auto-converge": throttle down guest to help convergence of migration
3408 - "zero-blocks": compress zero blocks during block migration
3409 - "events": generate events for each migration state change
3410
3411 Arguments:
3412
3413 Example:
3414
3415 -> { "execute": "migrate-set-capabilities" , "arguments":
3416      { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
3417
3418 EQMP
3419
3420     {
3421         .name       = "migrate-set-capabilities",
3422         .args_type  = "capabilities:q",
3423         .params     = "capability:s,state:b",
3424         .mhandler.cmd_new = qmp_marshal_input_migrate_set_capabilities,
3425     },
3426 SQMP
3427 query-migrate-capabilities
3428 --------------------------
3429
3430 Query current migration capabilities
3431
3432 - "capabilities": migration capabilities state
3433          - "xbzrle" : XBZRLE state (json-bool)
3434          - "rdma-pin-all" : RDMA Pin Page state (json-bool)
3435          - "auto-converge" : Auto Converge state (json-bool)
3436          - "zero-blocks" : Zero Blocks state (json-bool)
3437
3438 Arguments:
3439
3440 Example:
3441
3442 -> { "execute": "query-migrate-capabilities" }
3443 <- { "return": [ { "state": false, "capability": "xbzrle" } ] }
3444
3445 EQMP
3446
3447     {
3448         .name       = "query-migrate-capabilities",
3449         .args_type  = "",
3450         .mhandler.cmd_new = qmp_marshal_input_query_migrate_capabilities,
3451     },
3452
3453 SQMP
3454 migrate-set-parameters
3455 ----------------------
3456
3457 Set migration parameters
3458
3459 - "compress-level": set compression level during migration (json-int)
3460 - "compress-threads": set compression thread count for migration (json-int)
3461 - "decompress-threads": set decompression thread count for migration (json-int)
3462
3463 Arguments:
3464
3465 Example:
3466
3467 -> { "execute": "migrate-set-parameters" , "arguments":
3468       { "compress-level": 1 } }
3469
3470 EQMP
3471
3472     {
3473         .name       = "migrate-set-parameters",
3474         .args_type  =
3475             "compress-level:i?,compress-threads:i?,decompress-threads:i?",
3476         .mhandler.cmd_new = qmp_marshal_input_migrate_set_parameters,
3477     },
3478 SQMP
3479 query-migrate-parameters
3480 ------------------------
3481
3482 Query current migration parameters
3483
3484 - "parameters": migration parameters value
3485          - "compress-level" : compression level value (json-int)
3486          - "compress-threads" : compression thread count value (json-int)
3487          - "decompress-threads" : decompression thread count value (json-int)
3488
3489 Arguments:
3490
3491 Example:
3492
3493 -> { "execute": "query-migrate-parameters" }
3494 <- {
3495       "return": {
3496          "decompress-threads", 2,
3497          "compress-threads", 8,
3498          "compress-level", 1
3499       }
3500    }
3501
3502 EQMP
3503
3504     {
3505         .name       = "query-migrate-parameters",
3506         .args_type  = "",
3507         .mhandler.cmd_new = qmp_marshal_input_query_migrate_parameters,
3508     },
3509
3510 SQMP
3511 query-balloon
3512 -------------
3513
3514 Show balloon information.
3515
3516 Make an asynchronous request for balloon info. When the request completes a
3517 json-object will be returned containing the following data:
3518
3519 - "actual": current balloon value in bytes (json-int)
3520
3521 Example:
3522
3523 -> { "execute": "query-balloon" }
3524 <- {
3525       "return":{
3526          "actual":1073741824,
3527       }
3528    }
3529
3530 EQMP
3531
3532     {
3533         .name       = "query-balloon",
3534         .args_type  = "",
3535         .mhandler.cmd_new = qmp_marshal_input_query_balloon,
3536     },
3537
3538     {
3539         .name       = "query-block-jobs",
3540         .args_type  = "",
3541         .mhandler.cmd_new = qmp_marshal_input_query_block_jobs,
3542     },
3543
3544     {
3545         .name       = "qom-list",
3546         .args_type  = "path:s",
3547         .mhandler.cmd_new = qmp_marshal_input_qom_list,
3548     },
3549
3550     {
3551         .name       = "qom-set",
3552         .args_type  = "path:s,property:s,value:q",
3553         .mhandler.cmd_new = qmp_qom_set,
3554     },
3555
3556     {
3557         .name       = "qom-get",
3558         .args_type  = "path:s,property:s",
3559         .mhandler.cmd_new = qmp_qom_get,
3560     },
3561
3562     {
3563         .name       = "nbd-server-start",
3564         .args_type  = "addr:q",
3565         .mhandler.cmd_new = qmp_marshal_input_nbd_server_start,
3566     },
3567     {
3568         .name       = "nbd-server-add",
3569         .args_type  = "device:B,writable:b?",
3570         .mhandler.cmd_new = qmp_marshal_input_nbd_server_add,
3571     },
3572     {
3573         .name       = "nbd-server-stop",
3574         .args_type  = "",
3575         .mhandler.cmd_new = qmp_marshal_input_nbd_server_stop,
3576     },
3577
3578     {
3579         .name       = "change-vnc-password",
3580         .args_type  = "password:s",
3581         .mhandler.cmd_new = qmp_marshal_input_change_vnc_password,
3582     },
3583     {
3584         .name       = "qom-list-types",
3585         .args_type  = "implements:s?,abstract:b?",
3586         .mhandler.cmd_new = qmp_marshal_input_qom_list_types,
3587     },
3588
3589     {
3590         .name       = "device-list-properties",
3591         .args_type  = "typename:s",
3592         .mhandler.cmd_new = qmp_marshal_input_device_list_properties,
3593     },
3594
3595     {
3596         .name       = "query-machines",
3597         .args_type  = "",
3598         .mhandler.cmd_new = qmp_marshal_input_query_machines,
3599     },
3600
3601     {
3602         .name       = "query-cpu-definitions",
3603         .args_type  = "",
3604         .mhandler.cmd_new = qmp_marshal_input_query_cpu_definitions,
3605     },
3606
3607     {
3608         .name       = "query-target",
3609         .args_type  = "",
3610         .mhandler.cmd_new = qmp_marshal_input_query_target,
3611     },
3612
3613     {
3614         .name       = "query-tpm",
3615         .args_type  = "",
3616         .mhandler.cmd_new = qmp_marshal_input_query_tpm,
3617     },
3618
3619 SQMP
3620 query-tpm
3621 ---------
3622
3623 Return information about the TPM device.
3624
3625 Arguments: None
3626
3627 Example:
3628
3629 -> { "execute": "query-tpm" }
3630 <- { "return":
3631      [
3632        { "model": "tpm-tis",
3633          "options":
3634            { "type": "passthrough",
3635              "data":
3636                { "cancel-path": "/sys/class/misc/tpm0/device/cancel",
3637                  "path": "/dev/tpm0"
3638                }
3639            },
3640          "id": "tpm0"
3641        }
3642      ]
3643    }
3644
3645 EQMP
3646
3647     {
3648         .name       = "query-tpm-models",
3649         .args_type  = "",
3650         .mhandler.cmd_new = qmp_marshal_input_query_tpm_models,
3651     },
3652
3653 SQMP
3654 query-tpm-models
3655 ----------------
3656
3657 Return a list of supported TPM models.
3658
3659 Arguments: None
3660
3661 Example:
3662
3663 -> { "execute": "query-tpm-models" }
3664 <- { "return": [ "tpm-tis" ] }
3665
3666 EQMP
3667
3668     {
3669         .name       = "query-tpm-types",
3670         .args_type  = "",
3671         .mhandler.cmd_new = qmp_marshal_input_query_tpm_types,
3672     },
3673
3674 SQMP
3675 query-tpm-types
3676 ---------------
3677
3678 Return a list of supported TPM types.
3679
3680 Arguments: None
3681
3682 Example:
3683
3684 -> { "execute": "query-tpm-types" }
3685 <- { "return": [ "passthrough" ] }
3686
3687 EQMP
3688
3689     {
3690         .name       = "chardev-add",
3691         .args_type  = "id:s,backend:q",
3692         .mhandler.cmd_new = qmp_marshal_input_chardev_add,
3693     },
3694
3695 SQMP
3696 chardev-add
3697 ----------------
3698
3699 Add a chardev.
3700
3701 Arguments:
3702
3703 - "id": the chardev's ID, must be unique (json-string)
3704 - "backend": chardev backend type + parameters
3705
3706 Examples:
3707
3708 -> { "execute" : "chardev-add",
3709      "arguments" : { "id" : "foo",
3710                      "backend" : { "type" : "null", "data" : {} } } }
3711 <- { "return": {} }
3712
3713 -> { "execute" : "chardev-add",
3714      "arguments" : { "id" : "bar",
3715                      "backend" : { "type" : "file",
3716                                    "data" : { "out" : "/tmp/bar.log" } } } }
3717 <- { "return": {} }
3718
3719 -> { "execute" : "chardev-add",
3720      "arguments" : { "id" : "baz",
3721                      "backend" : { "type" : "pty", "data" : {} } } }
3722 <- { "return": { "pty" : "/dev/pty/42" } }
3723
3724 EQMP
3725
3726     {
3727         .name       = "chardev-remove",
3728         .args_type  = "id:s",
3729         .mhandler.cmd_new = qmp_marshal_input_chardev_remove,
3730     },
3731
3732
3733 SQMP
3734 chardev-remove
3735 --------------
3736
3737 Remove a chardev.
3738
3739 Arguments:
3740
3741 - "id": the chardev's ID, must exist and not be in use (json-string)
3742
3743 Example:
3744
3745 -> { "execute": "chardev-remove", "arguments": { "id" : "foo" } }
3746 <- { "return": {} }
3747
3748 EQMP
3749     {
3750         .name       = "query-rx-filter",
3751         .args_type  = "name:s?",
3752         .mhandler.cmd_new = qmp_marshal_input_query_rx_filter,
3753     },
3754
3755 SQMP
3756 query-rx-filter
3757 ---------------
3758
3759 Show rx-filter information.
3760
3761 Returns a json-array of rx-filter information for all NICs (or for the
3762 given NIC), returning an error if the given NIC doesn't exist, or
3763 given NIC doesn't support rx-filter querying, or given net client
3764 isn't a NIC.
3765
3766 The query will clear the event notification flag of each NIC, then qemu
3767 will start to emit event to QMP monitor.
3768
3769 Each array entry contains the following:
3770
3771 - "name": net client name (json-string)
3772 - "promiscuous": promiscuous mode is enabled (json-bool)
3773 - "multicast": multicast receive state (one of 'normal', 'none', 'all')
3774 - "unicast": unicast receive state  (one of 'normal', 'none', 'all')
3775 - "vlan": vlan receive state (one of 'normal', 'none', 'all') (Since 2.0)
3776 - "broadcast-allowed": allow to receive broadcast (json-bool)
3777 - "multicast-overflow": multicast table is overflowed (json-bool)
3778 - "unicast-overflow": unicast table is overflowed (json-bool)
3779 - "main-mac": main macaddr string (json-string)
3780 - "vlan-table": a json-array of active vlan id
3781 - "unicast-table": a json-array of unicast macaddr string
3782 - "multicast-table": a json-array of multicast macaddr string
3783
3784 Example:
3785
3786 -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } }
3787 <- { "return": [
3788         {
3789             "promiscuous": true,
3790             "name": "vnet0",
3791             "main-mac": "52:54:00:12:34:56",
3792             "unicast": "normal",
3793             "vlan": "normal",
3794             "vlan-table": [
3795                 4,
3796                 0
3797             ],
3798             "unicast-table": [
3799             ],
3800             "multicast": "normal",
3801             "multicast-overflow": false,
3802             "unicast-overflow": false,
3803             "multicast-table": [
3804                 "01:00:5e:00:00:01",
3805                 "33:33:00:00:00:01",
3806                 "33:33:ff:12:34:56"
3807             ],
3808             "broadcast-allowed": false
3809         }
3810       ]
3811    }
3812
3813 EQMP
3814
3815     {
3816         .name       = "blockdev-add",
3817         .args_type  = "options:q",
3818         .mhandler.cmd_new = qmp_marshal_input_blockdev_add,
3819     },
3820
3821 SQMP
3822 blockdev-add
3823 ------------
3824
3825 Add a block device.
3826
3827 This command is still a work in progress.  It doesn't support all
3828 block drivers, it lacks a matching blockdev-del, and more.  Stay away
3829 from it unless you want to help with its development.
3830
3831 Arguments:
3832
3833 - "options": block driver options
3834
3835 Example (1):
3836
3837 -> { "execute": "blockdev-add",
3838     "arguments": { "options" : { "driver": "qcow2",
3839                                  "file": { "driver": "file",
3840                                            "filename": "test.qcow2" } } } }
3841 <- { "return": {} }
3842
3843 Example (2):
3844
3845 -> { "execute": "blockdev-add",
3846      "arguments": {
3847          "options": {
3848            "driver": "qcow2",
3849            "id": "my_disk",
3850            "discard": "unmap",
3851            "cache": {
3852                "direct": true,
3853                "writeback": true
3854            },
3855            "file": {
3856                "driver": "file",
3857                "filename": "/tmp/test.qcow2"
3858            },
3859            "backing": {
3860                "driver": "raw",
3861                "file": {
3862                    "driver": "file",
3863                    "filename": "/dev/fdset/4"
3864                }
3865            }
3866          }
3867        }
3868      }
3869
3870 <- { "return": {} }
3871
3872 EQMP
3873
3874     {
3875         .name       = "query-named-block-nodes",
3876         .args_type  = "",
3877         .mhandler.cmd_new = qmp_marshal_input_query_named_block_nodes,
3878     },
3879
3880 SQMP
3881 @query-named-block-nodes
3882 ------------------------
3883
3884 Return a list of BlockDeviceInfo for all the named block driver nodes
3885
3886 Example:
3887
3888 -> { "execute": "query-named-block-nodes" }
3889 <- { "return": [ { "ro":false,
3890                    "drv":"qcow2",
3891                    "encrypted":false,
3892                    "file":"disks/test.qcow2",
3893                    "node-name": "my-node",
3894                    "backing_file_depth":1,
3895                    "bps":1000000,
3896                    "bps_rd":0,
3897                    "bps_wr":0,
3898                    "iops":1000000,
3899                    "iops_rd":0,
3900                    "iops_wr":0,
3901                    "bps_max": 8000000,
3902                    "bps_rd_max": 0,
3903                    "bps_wr_max": 0,
3904                    "iops_max": 0,
3905                    "iops_rd_max": 0,
3906                    "iops_wr_max": 0,
3907                    "iops_size": 0,
3908                    "write_threshold": 0,
3909                    "image":{
3910                       "filename":"disks/test.qcow2",
3911                       "format":"qcow2",
3912                       "virtual-size":2048000,
3913                       "backing_file":"base.qcow2",
3914                       "full-backing-filename":"disks/base.qcow2",
3915                       "backing-filename-format":"qcow2",
3916                       "snapshots":[
3917                          {
3918                             "id": "1",
3919                             "name": "snapshot1",
3920                             "vm-state-size": 0,
3921                             "date-sec": 10000200,
3922                             "date-nsec": 12,
3923                             "vm-clock-sec": 206,
3924                             "vm-clock-nsec": 30
3925                          }
3926                       ],
3927                       "backing-image":{
3928                           "filename":"disks/base.qcow2",
3929                           "format":"qcow2",
3930                           "virtual-size":2048000
3931                       }
3932                    } } ] }
3933
3934 EQMP
3935
3936     {
3937         .name       = "query-memdev",
3938         .args_type  = "",
3939         .mhandler.cmd_new = qmp_marshal_input_query_memdev,
3940     },
3941
3942 SQMP
3943 query-memdev
3944 ------------
3945
3946 Show memory devices information.
3947
3948
3949 Example (1):
3950
3951 -> { "execute": "query-memdev" }
3952 <- { "return": [
3953        {
3954          "size": 536870912,
3955          "merge": false,
3956          "dump": true,
3957          "prealloc": false,
3958          "host-nodes": [0, 1],
3959          "policy": "bind"
3960        },
3961        {
3962          "size": 536870912,
3963          "merge": false,
3964          "dump": true,
3965          "prealloc": true,
3966          "host-nodes": [2, 3],
3967          "policy": "preferred"
3968        }
3969      ]
3970    }
3971
3972 EQMP
3973
3974     {
3975         .name       = "query-memory-devices",
3976         .args_type  = "",
3977         .mhandler.cmd_new = qmp_marshal_input_query_memory_devices,
3978     },
3979
3980 SQMP
3981 @query-memory-devices
3982 --------------------
3983
3984 Return a list of memory devices.
3985
3986 Example:
3987 -> { "execute": "query-memory-devices" }
3988 <- { "return": [ { "data":
3989                       { "addr": 5368709120,
3990                         "hotpluggable": true,
3991                         "hotplugged": true,
3992                         "id": "d1",
3993                         "memdev": "/objects/memX",
3994                         "node": 0,
3995                         "size": 1073741824,
3996                         "slot": 0},
3997                    "type": "dimm"
3998                  } ] }
3999 EQMP
4000
4001     {
4002         .name       = "query-acpi-ospm-status",
4003         .args_type  = "",
4004         .mhandler.cmd_new = qmp_marshal_input_query_acpi_ospm_status,
4005     },
4006
4007 SQMP
4008 @query-acpi-ospm-status
4009 --------------------
4010
4011 Return list of ACPIOSTInfo for devices that support status reporting
4012 via ACPI _OST method.
4013
4014 Example:
4015 -> { "execute": "query-acpi-ospm-status" }
4016 <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0},
4017                  { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0},
4018                  { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0},
4019                  { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0}
4020    ]}
4021 EQMP
4022
4023 #if defined TARGET_I386
4024     {
4025         .name       = "rtc-reset-reinjection",
4026         .args_type  = "",
4027         .mhandler.cmd_new = qmp_marshal_input_rtc_reset_reinjection,
4028     },
4029 #endif
4030
4031 SQMP
4032 rtc-reset-reinjection
4033 ---------------------
4034
4035 Reset the RTC interrupt reinjection backlog.
4036
4037 Arguments: None.
4038
4039 Example:
4040
4041 -> { "execute": "rtc-reset-reinjection" }
4042 <- { "return": {} }
4043 EQMP
4044
4045     {
4046         .name       = "trace-event-get-state",
4047         .args_type  = "name:s",
4048         .mhandler.cmd_new = qmp_marshal_input_trace_event_get_state,
4049     },
4050
4051 SQMP
4052 trace-event-get-state
4053 ---------------------
4054
4055 Query the state of events.
4056
4057 Example:
4058
4059 -> { "execute": "trace-event-get-state", "arguments": { "name": "qemu_memalign" } }
4060 <- { "return": [ { "name": "qemu_memalign", "state": "disabled" } ] }
4061 EQMP
4062
4063     {
4064         .name       = "trace-event-set-state",
4065         .args_type  = "name:s,enable:b,ignore-unavailable:b?",
4066         .mhandler.cmd_new = qmp_marshal_input_trace_event_set_state,
4067     },
4068
4069 SQMP
4070 trace-event-set-state
4071 ---------------------
4072
4073 Set the state of events.
4074
4075 Example:
4076
4077 -> { "execute": "trace-event-set-state", "arguments": { "name": "qemu_memalign", "enable": "true" } }
4078 <- { "return": {} }
4079 EQMP
4080
4081     {
4082         .name       = "x-input-send-event",
4083         .args_type  = "console:i?,events:q",
4084         .mhandler.cmd_new = qmp_marshal_input_x_input_send_event,
4085     },
4086
4087 SQMP
4088 @x-input-send-event
4089 -----------------
4090
4091 Send input event to guest.
4092
4093 Arguments:
4094
4095 - "console": console index. (json-int, optional)
4096 - "events": list of input events.
4097
4098 The consoles are visible in the qom tree, under
4099 /backend/console[$index]. They have a device link and head property, so
4100 it is possible to map which console belongs to which device and display.
4101
4102 Note: this command is experimental, and not a stable API.
4103
4104 Example (1):
4105
4106 Press left mouse button.
4107
4108 -> { "execute": "x-input-send-event",
4109     "arguments": { "console": 0,
4110                    "events": [ { "type": "btn",
4111                     "data" : { "down": true, "button": "Left" } } ] } }
4112 <- { "return": {} }
4113
4114 -> { "execute": "x-input-send-event",
4115     "arguments": { "console": 0,
4116                    "events": [ { "type": "btn",
4117                     "data" : { "down": false, "button": "Left" } } ] } }
4118 <- { "return": {} }
4119
4120 Example (2):
4121
4122 Press ctrl-alt-del.
4123
4124 -> { "execute": "x-input-send-event",
4125      "arguments": { "console": 0, "events": [
4126         { "type": "key", "data" : { "down": true,
4127           "key": {"type": "qcode", "data": "ctrl" } } },
4128         { "type": "key", "data" : { "down": true,
4129           "key": {"type": "qcode", "data": "alt" } } },
4130         { "type": "key", "data" : { "down": true,
4131           "key": {"type": "qcode", "data": "delete" } } } ] } }
4132 <- { "return": {} }
4133
4134 Example (3):
4135
4136 Move mouse pointer to absolute coordinates (20000, 400).
4137
4138 -> { "execute": "x-input-send-event" ,
4139   "arguments": { "console": 0, "events": [
4140                { "type": "abs", "data" : { "axis": "X", "value" : 20000 } },
4141                { "type": "abs", "data" : { "axis": "Y", "value" : 400 } } ] } }
4142 <- { "return": {} }
4143
4144 EQMP
4145
4146     {
4147         .name       = "block-set-write-threshold",
4148         .args_type  = "node-name:s,write-threshold:l",
4149         .mhandler.cmd_new = qmp_marshal_input_block_set_write_threshold,
4150     },
4151
4152 SQMP
4153 block-set-write-threshold
4154 ------------
4155
4156 Change the write threshold for a block drive. The threshold is an offset,
4157 thus must be non-negative. Default is no write threshold.
4158 Setting the threshold to zero disables it.
4159
4160 Arguments:
4161
4162 - "node-name": the node name in the block driver state graph (json-string)
4163 - "write-threshold": the write threshold in bytes (json-int)
4164
4165 Example:
4166
4167 -> { "execute": "block-set-write-threshold",
4168   "arguments": { "node-name": "mydev",
4169                  "write-threshold": 17179869184 } }
4170 <- { "return": {} }
4171
4172 EQMP
4173
4174     {
4175         .name       = "query-rocker",
4176         .args_type  = "name:s",
4177         .mhandler.cmd_new = qmp_marshal_input_query_rocker,
4178     },
4179
4180 SQMP
4181 Show rocker switch
4182 ------------------
4183
4184 Arguments:
4185
4186 - "name": switch name
4187
4188 Example:
4189
4190 -> { "execute": "query-rocker", "arguments": { "name": "sw1" } }
4191 <- { "return": {"name": "sw1", "ports": 2, "id": 1327446905938}}
4192
4193 EQMP
4194
4195     {
4196         .name       = "query-rocker-ports",
4197         .args_type  = "name:s",
4198         .mhandler.cmd_new = qmp_marshal_input_query_rocker_ports,
4199     },
4200
4201 SQMP
4202 Show rocker switch ports
4203 ------------------------
4204
4205 Arguments:
4206
4207 - "name": switch name
4208
4209 Example:
4210
4211 -> { "execute": "query-rocker-ports", "arguments": { "name": "sw1" } }
4212 <- { "return": [ {"duplex": "full", "enabled": true, "name": "sw1.1",
4213                   "autoneg": "off", "link-up": true, "speed": 10000},
4214                  {"duplex": "full", "enabled": true, "name": "sw1.2",
4215                   "autoneg": "off", "link-up": true, "speed": 10000}
4216    ]}
4217
4218 EQMP
4219
4220     {
4221         .name       = "query-rocker-of-dpa-flows",
4222         .args_type  = "name:s,tbl-id:i?",
4223         .mhandler.cmd_new = qmp_marshal_input_query_rocker_of_dpa_flows,
4224     },
4225
4226 SQMP
4227 Show rocker switch OF-DPA flow tables
4228 -------------------------------------
4229
4230 Arguments:
4231
4232 - "name": switch name
4233 - "tbl-id": (optional) flow table ID
4234
4235 Example:
4236
4237 -> { "execute": "query-rocker-of-dpa-flows", "arguments": { "name": "sw1" } }
4238 <- { "return": [ {"key": {"in-pport": 0, "priority": 1, "tbl-id": 0},
4239                   "hits": 138,
4240                   "cookie": 0,
4241                   "action": {"goto-tbl": 10},
4242                   "mask": {"in-pport": 4294901760}
4243                  },
4244                  {...more...},
4245    ]}
4246
4247 EQMP
4248
4249     {
4250         .name       = "query-rocker-of-dpa-groups",
4251         .args_type  = "name:s,type:i?",
4252         .mhandler.cmd_new = qmp_marshal_input_query_rocker_of_dpa_groups,
4253     },
4254
4255 SQMP
4256 Show rocker OF-DPA group tables
4257 -------------------------------
4258
4259 Arguments:
4260
4261 - "name": switch name
4262 - "type": (optional) group type
4263
4264 Example:
4265
4266 -> { "execute": "query-rocker-of-dpa-groups", "arguments": { "name": "sw1" } }
4267 <- { "return": [ {"type": 0, "out-pport": 2, "pport": 2, "vlan-id": 3841,
4268                   "pop-vlan": 1, "id": 251723778},
4269                  {"type": 0, "out-pport": 0, "pport": 0, "vlan-id": 3841,
4270                   "pop-vlan": 1, "id": 251723776},
4271                  {"type": 0, "out-pport": 1, "pport": 1, "vlan-id": 3840,
4272                   "pop-vlan": 1, "id": 251658241},
4273                  {"type": 0, "out-pport": 0, "pport": 0, "vlan-id": 3840,
4274                   "pop-vlan": 1, "id": 251658240}
4275    ]}