-# opensds-ansible\r
-This is an installation tool for opensds using ansible.\r
-\r
-## 1. How to install an opensds local cluster\r
-This installation document assumes there is a clean Ubuntu 16.04 environment. If golang is already installed in the environment, make sure the following parameters are configured in ```/etc/profile``` and run ``source /etc/profile``:\r
-```conf\r
-export GOROOT=/usr/local/go\r
-export GOPATH=$HOME/gopath\r
-export PATH=$PATH:$GOROOT/bin:$GOPATH/bin\r
-```\r
-\r
-### Pre-config (Ubuntu 16.04)\r
-First download some system packages:\r
-```\r
-sudo apt-get install -y openssh-server git make gcc\r
-```\r
-Then config ```/etc/ssh/sshd_config``` file and change one line:\r
-```conf\r
-PermitRootLogin yes\r
-```\r
-Next generate ssh-token:\r
-```bash\r
-ssh-keygen -t rsa\r
-ssh-copy-id -i ~/.ssh/id_rsa.pub <ip_address> # IP address of the target machine of the installation\r
-```\r
-\r
-### Install docker\r
-If use a standalone cinder as backend, you also need to install docker to run cinder service. Please see the [docker installation document](https://docs.docker.com/engine/installation/linux/docker-ce/ubuntu/) for details.\r
-\r
-### Install ansible tool\r
-```bash\r
-sudo add-apt-repository ppa:ansible/ansible # This step is needed to upgrade ansible to version 2.4.2 which is required for the ceph backend.\r
-sudo apt-get update\r
-sudo apt-get install ansible\r
-ansible --version # Ansible version 2.4.2 or higher is required for ceph; 2.0.0.2 or higher is needed for other backends.\r
-```\r
-\r
-### Download opensds source code\r
-```bash\r
-mkdir -p $HOME/gopath/src/github.com/opensds && cd $HOME/gopath/src/github.com/opensds\r
-git clone https://github.com/opensds/opensds.git -b <specified_branch_name>\r
-cd opensds/contrib/ansible\r
-```\r
-\r
-### Configure opensds cluster variables:\r
-##### System environment:\r
-Configure the ```workplace``` in `group_vars/common.yml`:\r
-```yaml\r
-workplace: /home/your_username # Change this field according to your username. If login as root, configure this parameter to '/root'\r
-```\r
-\r
-##### LVM\r
-If `lvm` is chosen as storage backend, modify `group_vars/osdsdock.yml`:\r
-```yaml\r
-enabled_backend: lvm # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'\r
-pv_device: "your_pv_device_path" # Specify a block device and ensure it exists if lvm is chosen\r
-vg_name: "specified_vg_name" # Specify a name for VG if choosing lvm\r
-```\r
-Modify ```group_vars/lvm/lvm.yaml```, change pool name to be the same as `vg_name` above:\r
-```yaml\r
-"vg001" # change pool name to be the same as vg_name\r
-```\r
-##### Ceph\r
-If `ceph` is chosen as storage backend, modify `group_vars/osdsdock.yml`:\r
-```yaml\r
-enabled_backend: ceph # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'.\r
-ceph_pool_name: "specified_pool_name" # Specify a name for ceph pool if choosing ceph\r
-```\r
-Modify ```group_vars/ceph/ceph.yaml```, change pool name to be the same as `ceph_pool_name`:\r
-```yaml\r
-"rbd" # change pool name to be the same as ceph pool\r
-```\r
-Configure two files under ```group_vars/ceph```: `all.yml` and `osds.yml`. Here is an example:\r
-\r
-```group_vars/ceph/all.yml```:\r
-```yml\r
-ceph_origin: repository\r
-ceph_repository: community\r
-ceph_stable_release: luminous # Choose luminous as default version\r
-public_network: "192.168.3.0/24" # Run 'ip -4 address' to check the ip address\r
-cluster_network: "{{ public_network }}"\r
-monitor_interface: eth1 # Change to the network interface on the target machine\r
-```\r
-```group_vars/ceph/osds.yml```:\r
-```yml\r
-devices: # For ceph devices, append one or multiple devices like the example below:\r
- - '/dev/sda' # Ensure this device exists and available if ceph is chosen\r
- - '/dev/sdb' # Ensure this device exists and available if ceph is chosen\r
-osd_scenario: collocated\r
-```\r
-\r
-##### Cinder\r
-If `cinder` is chosen as storage backend, modify `group_vars/osdsdock.yml`:\r
-```yaml\r
-enabled_backend: cinder # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'\r
-\r
-# Use block-box install cinder_standalone if true, see details in:\r
-use_cinder_standalone: true\r
-# If true, you can configure cinder_container_platform, cinder_image_tag,\r
-# cinder_volume_group.\r
-\r
-# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported.\r
-cinder_container_platform: debian:stretch\r
-# The image tag can be arbitrarily modified, as long as follow the image naming\r
-# conventions, default: debian-cinder\r
-cinder_image_tag: debian-cinder\r
-# The cinder standalone use lvm driver as default driver, therefore `volume_group`\r
-# should be configured, the default is: cinder-volumes. The volume group will be\r
-# removed when use ansible script clean environment.\r
-cinder_volume_group: cinder-volumes\r
-```\r
-\r
-Configure the auth and pool options to access cinder in `group_vars/cinder/cinder.yaml`. Do not need to make additional configure changes if using cinder standalone.\r
-\r
-### Check if the hosts can be reached\r
-```bash\r
-sudo ansible all -m ping -i local.hosts\r
-```\r
-\r
-### Run opensds-ansible playbook to start deploy\r
-```bash\r
-sudo ansible-playbook site.yml -i local.hosts\r
-```\r
-\r
-## 2. How to test opensds cluster\r
-\r
-### Configure opensds CLI tool\r
-```bash\r
-sudo cp $GOPATH/src/github.com/opensds/opensds/build/out/bin/osdsctl /usr/local/bin\r
-export OPENSDS_ENDPOINT=http://127.0.0.1:50040\r
-osdsctl pool list # Check if the pool resource is available\r
-```\r
-\r
-### Create a default profile first.\r
-```\r
-osdsctl profile create '{"name": "default", "description": "default policy"}'\r
-```\r
-\r
-### Create a volume.\r
-```\r
-osdsctl volume create 1 --name=test-001\r
-```\r
-For cinder, az needs to be specified.\r
-```\r
-osdsctl volume create 1 --name=test-001 --az nova\r
-```\r
-\r
-### List all volumes.\r
-```\r
-osdsctl volume list\r
-```\r
-\r
-### Delete the volume.\r
-```\r
-osdsctl volume delete <your_volume_id>\r
-```\r
-\r
-\r
-## 3. How to purge and clean opensds cluster\r
-\r
-### Run opensds-ansible playbook to clean the environment\r
-```bash\r
-sudo ansible-playbook clean.yml -i local.hosts\r
-```\r
-\r
-### Run ceph-ansible playbook to clean ceph cluster if ceph is deployed\r
-```bash\r
-cd /opt/ceph-ansible\r
-sudo ansible-playbook infrastructure-playbooks/purge-cluster.yml -i ceph.hosts\r
-```\r
-\r
-In addition, clean up the logical partition on the physical block device used by ceph, using the ```fdisk``` tool.\r
-\r
-### Remove ceph-ansible source code (optional)\r
-```bash\r
-cd ..\r
-sudo rm -rf /opt/ceph-ansible\r
-```\r
+# opensds-ansible
+This is an installation tool for opensds using ansible.
+
+## 1. How to install an opensds local cluster
+This installation document assumes there is a clean Ubuntu 16.04 environment. If golang is already installed in the environment, make sure the following parameters are configured in ```/etc/profile``` and run ``source /etc/profile``:
+```conf
+export GOROOT=/usr/local/go
+export GOPATH=$HOME/gopath
+export PATH=$PATH:$GOROOT/bin:$GOPATH/bin
+```
+
+### Pre-config (Ubuntu 16.04)
+First download some system packages:
+```
+sudo apt-get install -y openssh-server git make gcc
+```
+Then config ```/etc/ssh/sshd_config``` file and change one line:
+```conf
+PermitRootLogin yes
+```
+Next generate ssh-token:
+```bash
+ssh-keygen -t rsa
+ssh-copy-id -i ~/.ssh/id_rsa.pub <ip_address> # IP address of the target machine of the installation
+```
+
+### Install docker
+If use a standalone cinder as backend, you also need to install docker to run cinder service. Please see the [docker installation document](https://docs.docker.com/engine/installation/linux/docker-ce/ubuntu/) for details.
+
+### Install ansible tool
+```bash
+sudo add-apt-repository ppa:ansible/ansible # This step is needed to upgrade ansible to version 2.4.2 which is required for the ceph backend.
+sudo apt-get update
+sudo apt-get install ansible
+ansible --version # Ansible version 2.4.2 or higher is required for ceph; 2.0.0.2 or higher is needed for other backends.
+```
+
+### Download opensds source code
+```bash
+mkdir -p $HOME/gopath/src/github.com/opensds && cd $HOME/gopath/src/github.com/opensds
+git clone https://github.com/opensds/opensds.git -b <specified_branch_name>
+cd opensds/contrib/ansible
+```
+
+### Configure opensds cluster variables:
+##### System environment:
+Configure the ```workplace``` in `group_vars/common.yml`:
+```yaml
+workplace: /home/your_username # Change this field according to your username. If login as root, configure this parameter to '/root'
+```
+
+##### LVM
+If `lvm` is chosen as storage backend, modify `group_vars/osdsdock.yml`:
+```yaml
+enabled_backend: lvm # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'
+pv_device: "your_pv_device_path" # Specify a block device and ensure it exists if lvm is chosen
+vg_name: "specified_vg_name" # Specify a name for VG if choosing lvm
+```
+Modify ```group_vars/lvm/lvm.yaml```, change pool name to be the same as `vg_name` above:
+```yaml
+"vg001" # change pool name to be the same as vg_name
+```
+##### Ceph
+If `ceph` is chosen as storage backend, modify `group_vars/osdsdock.yml`:
+```yaml
+enabled_backend: ceph # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'.
+ceph_pool_name: "specified_pool_name" # Specify a name for ceph pool if choosing ceph
+```
+Modify ```group_vars/ceph/ceph.yaml```, change pool name to be the same as `ceph_pool_name`:
+```yaml
+"rbd" # change pool name to be the same as ceph pool
+```
+Configure two files under ```group_vars/ceph```: `all.yml` and `osds.yml`. Here is an example:
+
+```group_vars/ceph/all.yml```:
+```yml
+ceph_origin: repository
+ceph_repository: community
+ceph_stable_release: luminous # Choose luminous as default version
+public_network: "192.168.3.0/24" # Run 'ip -4 address' to check the ip address
+cluster_network: "{{ public_network }}"
+monitor_interface: eth1 # Change to the network interface on the target machine
+```
+```group_vars/ceph/osds.yml```:
+```yml
+devices: # For ceph devices, append one or multiple devices like the example below:
+ - '/dev/sda' # Ensure this device exists and available if ceph is chosen
+ - '/dev/sdb' # Ensure this device exists and available if ceph is chosen
+osd_scenario: collocated
+```
+
+##### Cinder
+If `cinder` is chosen as storage backend, modify `group_vars/osdsdock.yml`:
+```yaml
+enabled_backend: cinder # Change it according to the chosen backend. Supported backends include 'lvm', 'ceph', and 'cinder'
+
+# Use block-box install cinder_standalone if true, see details in:
+use_cinder_standalone: true
+# If true, you can configure cinder_container_platform, cinder_image_tag,
+# cinder_volume_group.
+
+# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported.
+cinder_container_platform: debian:stretch
+# The image tag can be arbitrarily modified, as long as follow the image naming
+# conventions, default: debian-cinder
+cinder_image_tag: debian-cinder
+# The cinder standalone use lvm driver as default driver, therefore `volume_group`
+# should be configured, the default is: cinder-volumes. The volume group will be
+# removed when use ansible script clean environment.
+cinder_volume_group: cinder-volumes
+```
+
+Configure the auth and pool options to access cinder in `group_vars/cinder/cinder.yaml`. Do not need to make additional configure changes if using cinder standalone.
+
+### Check if the hosts can be reached
+```bash
+sudo ansible all -m ping -i local.hosts
+```
+
+### Run opensds-ansible playbook to start deploy
+```bash
+sudo ansible-playbook site.yml -i local.hosts
+```
+
+## 2. How to test opensds cluster
+
+### Configure opensds CLI tool
+```bash
+sudo cp $GOPATH/src/github.com/opensds/opensds/build/out/bin/osdsctl /usr/local/bin
+export OPENSDS_ENDPOINT=http://127.0.0.1:50040
+osdsctl pool list # Check if the pool resource is available
+```
+
+### Create a default profile first.
+```
+osdsctl profile create '{"name": "default", "description": "default policy"}'
+```
+
+### Create a volume.
+```
+osdsctl volume create 1 --name=test-001
+```
+For cinder, az needs to be specified.
+```
+osdsctl volume create 1 --name=test-001 --az nova
+```
+
+### List all volumes.
+```
+osdsctl volume list
+```
+
+### Delete the volume.
+```
+osdsctl volume delete <your_volume_id>
+```
+
+
+## 3. How to purge and clean opensds cluster
+
+### Run opensds-ansible playbook to clean the environment
+```bash
+sudo ansible-playbook clean.yml -i local.hosts
+```
+
+### Run ceph-ansible playbook to clean ceph cluster if ceph is deployed
+```bash
+cd /opt/ceph-ansible
+sudo ansible-playbook infrastructure-playbooks/purge-cluster.yml -i ceph.hosts
+```
+
+In addition, clean up the logical partition on the physical block device used by ceph, using the ```fdisk``` tool.
+
+### Remove ceph-ansible source code (optional)
+```bash
+cd ..
+sudo rm -rf /opt/ceph-ansible
+```
----\r
-# Defines some clean processes when banishing the cluster.\r
-\r
-- name: destory an opensds cluster\r
- hosts: all\r
- remote_user: root\r
- vars_files:\r
- - group_vars/common.yml\r
- - group_vars/osdsdb.yml\r
- - group_vars/osdsdock.yml\r
- gather_facts: false\r
- become: True\r
- roles:\r
+---
+# Defines some clean processes when banishing the cluster.
+
+- name: destory an opensds cluster
+ hosts: all
+ remote_user: root
+ vars_files:
+ - group_vars/common.yml
+ - group_vars/osdsdb.yml
+ - group_vars/osdsdock.yml
+ gather_facts: false
+ become: True
+ roles:
- cleaner
\ No newline at end of file
----\r
-# Variables here are applicable to all host groups NOT roles\r
-\r
-# This sample file generated by generate_group_vars_sample.sh\r
-\r
-# Dummy variable to avoid error because ansible does not recognize the\r
-# file as a good configuration file when no variable in it.\r
-dummy:\r
-\r
-# You can override vars by using host or group vars\r
-\r
-###########\r
-# GENERAL #\r
-###########\r
-\r
-######################################\r
-# Releases name to number dictionary #\r
-######################################\r
-#ceph_release_num:\r
-# dumpling: 0.67\r
-# emperor: 0.72\r
-# firefly: 0.80\r
-# giant: 0.87\r
-# hammer: 0.94\r
-# infernalis: 9\r
-# jewel: 10\r
-# kraken: 11\r
-# luminous: 12\r
-# mimic: 13\r
-\r
-# Directory to fetch cluster fsid, keys etc...\r
-#fetch_directory: fetch/\r
-\r
-# The 'cluster' variable determines the name of the cluster.\r
-# Changing the default value to something else means that you will\r
-# need to change all the command line calls as well, for example if\r
-# your cluster name is 'foo':\r
-# "ceph health" will become "ceph --cluster foo health"\r
-#\r
-# An easier way to handle this is to use the environment variable CEPH_ARGS\r
-# So run: "export CEPH_ARGS="--cluster foo"\r
-# With that you will be able to run "ceph health" normally\r
-#cluster: ceph\r
-\r
-# Inventory host group variables\r
-#mon_group_name: mons\r
-#osd_group_name: osds\r
-#rgw_group_name: rgws\r
-#mds_group_name: mdss\r
-#nfs_group_name: nfss\r
-#restapi_group_name: restapis\r
-#rbdmirror_group_name: rbdmirrors\r
-#client_group_name: clients\r
-#iscsi_gw_group_name: iscsi-gws\r
-#mgr_group_name: mgrs\r
-\r
-# If check_firewall is true, then ansible will try to determine if the\r
-# Ceph ports are blocked by a firewall. If the machine running ansible\r
-# cannot reach the Ceph ports for some other reason, you may need or\r
-# want to set this to False to skip those checks.\r
-#check_firewall: False\r
-\r
-\r
-############\r
-# PACKAGES #\r
-############\r
-#debian_package_dependencies:\r
-# - python-pycurl\r
-# - hdparm\r
-\r
-#centos_package_dependencies:\r
-# - python-pycurl\r
-# - hdparm\r
-# - epel-release\r
-# - python-setuptools\r
-# - libselinux-python\r
-\r
-#redhat_package_dependencies:\r
-# - python-pycurl\r
-# - hdparm\r
-# - python-setuptools\r
-\r
-# Whether or not to install the ceph-test package.\r
-#ceph_test: false\r
-\r
-# Enable the ntp service by default to avoid clock skew on\r
-# ceph nodes\r
-#ntp_service_enabled: true\r
-\r
-# Set uid/gid to default '64045' for bootstrap directories.\r
-# '64045' is used for debian based distros. It must be set to 167 in case of rhel based distros.\r
-# These values have to be set according to the base OS used by the container image, NOT the host.\r
-#bootstrap_dirs_owner: "64045"\r
-#bootstrap_dirs_group: "64045"\r
-\r
-# This variable determines if ceph packages can be updated. If False, the\r
-# package resources will use "state=present". If True, they will use\r
-# "state=latest".\r
-#upgrade_ceph_packages: False\r
-\r
-#ceph_use_distro_backports: false # DEBIAN ONLY\r
-\r
-\r
-###########\r
-# INSTALL #\r
-###########\r
-#ceph_rhcs_cdn_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_repository_type: "{{ 'cdn' if ceph_rhcs_cdn_install else 'iso' if ceph_rhcs_iso_install else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_rhcs_iso_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_rhcs: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_stable: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_dev: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_stable_uca: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_custom: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-\r
-# ORIGIN SOURCE\r
-#\r
-# Choose between:\r
-# - 'repository' means that you will get ceph installed through a new repository. Later below choose between 'community', 'rhcs' or 'dev'\r
-# - 'distro' means that no separate repo file will be added\r
-# you will get whatever version of Ceph is included in your Linux distro.\r
-# 'local' means that the ceph binaries will be copied over from the local machine\r
-#ceph_origin: "{{ 'repository' if ceph_rhcs or ceph_stable or ceph_dev or ceph_stable_uca or ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#valid_ceph_origins:\r
-# - repository\r
-# - distro\r
-# - local\r
-ceph_origin: repository\r
-ceph_repository: community\r
-\r
-#ceph_repository: "{{ 'community' if ceph_stable else 'rhcs' if ceph_rhcs else 'dev' if ceph_dev else 'uca' if ceph_stable_uca else 'custom' if ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#valid_ceph_repository:\r
-# - community\r
-# - rhcs\r
-# - dev\r
-# - uca\r
-# - custom\r
-\r
-\r
-# REPOSITORY: COMMUNITY VERSION\r
-#\r
-# Enabled when ceph_repository == 'community'\r
-#\r
-#ceph_mirror: http://download.ceph.com\r
-#ceph_stable_key: https://download.ceph.com/keys/release.asc\r
-ceph_stable_release: luminous\r
-#ceph_stable_repo: "{{ ceph_mirror }}/debian-{{ ceph_stable_release }}"\r
-\r
-#nfs_ganesha_stable: true # use stable repos for nfs-ganesha\r
-#nfs_ganesha_stable_branch: V2.5-stable\r
-#nfs_ganesha_stable_deb_repo: "{{ ceph_mirror }}/nfs-ganesha/deb-{{ nfs_ganesha_stable_branch }}/{{ ceph_stable_release }}"\r
-\r
-\r
-# Use the option below to specify your applicable package tree, eg. when using non-LTS Ubuntu versions\r
-# # for a list of available Debian distributions, visit http://download.ceph.com/debian-{{ ceph_stable_release }}/dists/\r
-# for more info read: https://github.com/ceph/ceph-ansible/issues/305\r
-#ceph_stable_distro_source: "{{ ansible_lsb.codename }}"\r
-\r
-# This option is needed for _both_ stable and dev version, so please always fill the right version\r
-# # for supported distros, see http://download.ceph.com/rpm-{{ ceph_stable_release }}/\r
-#ceph_stable_redhat_distro: el7\r
-\r
-\r
-# REPOSITORY: RHCS VERSION RED HAT STORAGE (from 1.3)\r
-#\r
-# Enabled when ceph_repository == 'rhcs'\r
-#\r
-# This version is only supported on RHEL >= 7.1\r
-# As of RHEL 7.1, libceph.ko and rbd.ko are now included in Red Hat's kernel\r
-# packages natively. The RHEL 7.1 kernel packages are more stable and secure than\r
-# using these 3rd-party kmods with RHEL 7.0. Please update your systems to RHEL\r
-# 7.1 or later if you want to use the kernel RBD client.\r
-#\r
-# The CephFS kernel client is undergoing rapid development upstream, and we do\r
-# not recommend running the CephFS kernel module on RHEL 7's 3.10 kernel at this\r
-# time. Please use ELRepo's latest upstream 4.x kernels if you want to run CephFS\r
-# on RHEL 7.\r
-#\r
-#\r
-#ceph_rhcs_version: "{{ ceph_stable_rh_storage_version | default(2) }}"\r
-#valid_ceph_repository_type:\r
-# - cdn\r
-# - iso\r
-#ceph_rhcs_iso_path: "{{ ceph_stable_rh_storage_iso_path | default('') }}"\r
-#ceph_rhcs_mount_path: "{{ ceph_stable_rh_storage_mount_path | default('/tmp/rh-storage-mount') }}"\r
-#ceph_rhcs_repository_path: "{{ ceph_stable_rh_storage_repository_path | default('/tmp/rh-storage-repo') }}" # where to copy iso's content\r
-\r
-# RHCS installation in Debian systems\r
-#ceph_rhcs_cdn_debian_repo: https://customername:customerpasswd@rhcs.download.redhat.com\r
-#ceph_rhcs_cdn_debian_repo_version: "/3-release/" # for GA, later for updates use /3-updates/\r
-\r
-\r
-# REPOSITORY: UBUNTU CLOUD ARCHIVE\r
-#\r
-# Enabled when ceph_repository == 'uca'\r
-#\r
-# This allows the install of Ceph from the Ubuntu Cloud Archive. The Ubuntu Cloud Archive\r
-# usually has newer Ceph releases than the normal distro repository.\r
-#\r
-#\r
-#ceph_stable_repo_uca: "http://ubuntu-cloud.archive.canonical.com/ubuntu"\r
-#ceph_stable_openstack_release_uca: liberty\r
-#ceph_stable_release_uca: "{{ansible_lsb.codename}}-updates/{{ceph_stable_openstack_release_uca}}"\r
-\r
-\r
-# REPOSITORY: DEV\r
-#\r
-# Enabled when ceph_repository == 'dev'\r
-#\r
-#ceph_dev_branch: master # development branch you would like to use e.g: master, wip-hack\r
-#ceph_dev_sha1: latest # distinct sha1 to use, defaults to 'latest' (as in latest built)\r
-\r
-#nfs_ganesha_dev: false # use development repos for nfs-ganesha\r
-\r
-# Set this to choose the version of ceph dev libraries used in the nfs-ganesha packages from shaman\r
-# flavors so far include: ceph_master, ceph_jewel, ceph_kraken, ceph_luminous\r
-#nfs_ganesha_flavor: "ceph_master"\r
-\r
-#ceph_iscsi_config_dev: true # special repo for deploying iSCSI gateways\r
-\r
-\r
-# REPOSITORY: CUSTOM\r
-#\r
-# Enabled when ceph_repository == 'custom'\r
-#\r
-# Use a custom repository to install ceph. For RPM, ceph_custom_repo should be\r
-# a URL to the .repo file to be installed on the targets. For deb,\r
-# ceph_custom_repo should be the URL to the repo base.\r
-#\r
-#ceph_custom_repo: https://server.domain.com/ceph-custom-repo\r
-\r
-\r
-# ORIGIN: LOCAL CEPH INSTALLATION\r
-#\r
-# Enabled when ceph_repository == 'local'\r
-#\r
-# Path to DESTDIR of the ceph install\r
-#ceph_installation_dir: "/path/to/ceph_installation/"\r
-# Whether or not to use installer script rundep_installer.sh\r
-# This script takes in rundep and installs the packages line by line onto the machine\r
-# If this is set to false then it is assumed that the machine ceph is being copied onto will already have\r
-# all runtime dependencies installed\r
-#use_installer: false\r
-# Root directory for ceph-ansible\r
-#ansible_dir: "/path/to/ceph-ansible"\r
-\r
-\r
-######################\r
-# CEPH CONFIGURATION #\r
-######################\r
-\r
-## Ceph options\r
-#\r
-# Each cluster requires a unique, consistent filesystem ID. By\r
-# default, the playbook generates one for you and stores it in a file\r
-# in `fetch_directory`. If you want to customize how the fsid is\r
-# generated, you may find it useful to disable fsid generation to\r
-# avoid cluttering up your ansible repo. If you set `generate_fsid` to\r
-# false, you *must* generate `fsid` in another way.\r
-# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT\r
-#fsid: "{{ cluster_uuid.stdout }}"\r
-#generate_fsid: true\r
-\r
-#ceph_conf_key_directory: /etc/ceph\r
-\r
-#cephx: true\r
-\r
-## Client options\r
-#\r
-#rbd_cache: "true"\r
-#rbd_cache_writethrough_until_flush: "true"\r
-#rbd_concurrent_management_ops: 20\r
-\r
-#rbd_client_directories: true # this will create rbd_client_log_path and rbd_client_admin_socket_path directories with proper permissions\r
-\r
-# Permissions for the rbd_client_log_path and\r
-# rbd_client_admin_socket_path. Depending on your use case for Ceph\r
-# you may want to change these values. The default, which is used if\r
-# any of the variables are unset or set to a false value (like `null`\r
-# or `false`) is to automatically determine what is appropriate for\r
-# the Ceph version with non-OpenStack workloads -- ceph:ceph and 0770\r
-# for infernalis releases, and root:root and 1777 for pre-infernalis\r
-# releases.\r
-#\r
-# For other use cases, including running Ceph with OpenStack, you'll\r
-# want to set these differently:\r
-#\r
-# For OpenStack on RHEL, you'll want:\r
-# rbd_client_directory_owner: "qemu"\r
-# rbd_client_directory_group: "libvirtd" (or "libvirt", depending on your version of libvirt)\r
-# rbd_client_directory_mode: "0755"\r
-#\r
-# For OpenStack on Ubuntu or Debian, set:\r
-# rbd_client_directory_owner: "libvirt-qemu"\r
-# rbd_client_directory_group: "kvm"\r
-# rbd_client_directory_mode: "0755"\r
-#\r
-# If you set rbd_client_directory_mode, you must use a string (e.g.,\r
-# 'rbd_client_directory_mode: "0755"', *not*\r
-# 'rbd_client_directory_mode: 0755', or Ansible will complain: mode\r
-# must be in octal or symbolic form\r
-#rbd_client_directory_owner: null\r
-#rbd_client_directory_group: null\r
-#rbd_client_directory_mode: null\r
-\r
-#rbd_client_log_path: /var/log/ceph\r
-#rbd_client_log_file: "{{ rbd_client_log_path }}/qemu-guest-$pid.log" # must be writable by QEMU and allowed by SELinux or AppArmor\r
-#rbd_client_admin_socket_path: /var/run/ceph # must be writable by QEMU and allowed by SELinux or AppArmor\r
-\r
-## Monitor options\r
-#\r
-# You must define either monitor_interface, monitor_address or monitor_address_block.\r
-# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).\r
-# Eg. If you want to specify for each monitor which address the monitor will bind to you can set it in your **inventory host file** by using 'monitor_address' variable.\r
-# Preference will go to monitor_address if both monitor_address and monitor_interface are defined.\r
-# To use an IPv6 address, use the monitor_address setting instead (and set ip_version to ipv6)\r
-monitor_interface: ens3\r
-#monitor_address: 0.0.0.0\r
-#monitor_address_block: subnet\r
-# set to either ipv4 or ipv6, whichever your network is using\r
-#ip_version: ipv4\r
-#mon_use_fqdn: false # if set to true, the MON name used will be the fqdn in the ceph.conf\r
-\r
-## OSD options\r
-#\r
-journal_size: 100 # OSD journal size in MB\r
-public_network: 100.64.128.40/24\r
-cluster_network: "{{ public_network }}"\r
-#osd_mkfs_type: xfs\r
-#osd_mkfs_options_xfs: -f -i size=2048\r
-#osd_mount_options_xfs: noatime,largeio,inode64,swalloc\r
-#osd_objectstore: filestore\r
-\r
-# xattrs. by default, 'filestore xattr use omap' is set to 'true' if\r
-# 'osd_mkfs_type' is set to 'ext4'; otherwise it isn't set. This can\r
-# be set to 'true' or 'false' to explicitly override those\r
-# defaults. Leave it 'null' to use the default for your chosen mkfs\r
-# type.\r
-#filestore_xattr_use_omap: null\r
-\r
-## MDS options\r
-#\r
-#mds_use_fqdn: false # if set to true, the MDS name used will be the fqdn in the ceph.conf\r
-#mds_allow_multimds: false\r
-#mds_max_mds: 3\r
-\r
-## Rados Gateway options\r
-#\r
-#radosgw_dns_name: your.subdomain.tld # subdomains used by radosgw. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls\r
-#radosgw_resolve_cname: false # enable for radosgw to resolve DNS CNAME based bucket names\r
-#radosgw_civetweb_port: 8080\r
-#radosgw_civetweb_num_threads: 100\r
-# For additional civetweb configuration options available such as SSL, logging,\r
-# keepalive, and timeout settings, please see the civetweb docs at\r
-# https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md\r
-#radosgw_civetweb_options: "num_threads={{ radosgw_civetweb_num_threads }}"\r
-# You must define either radosgw_interface, radosgw_address.\r
-# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).\r
-# Eg. If you want to specify for each radosgw node which address the radosgw will bind to you can set it in your **inventory host file** by using 'radosgw_address' variable.\r
-# Preference will go to radosgw_address if both radosgw_address and radosgw_interface are defined.\r
-# To use an IPv6 address, use the radosgw_address setting instead (and set ip_version to ipv6)\r
-#radosgw_interface: interface\r
-#radosgw_address: "{{ '0.0.0.0' if rgw_containerized_deployment else 'address' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#radosgw_address_block: subnet\r
-#radosgw_keystone: false # activate OpenStack Keystone options full detail here: http://ceph.com/docs/master/radosgw/keystone/\r
-# Rados Gateway options\r
-#email_address: foo@bar.com\r
-\r
-## REST API options\r
-#\r
-#restapi_interface: "{{ monitor_interface }}"\r
-#restapi_address: "{{ monitor_address }}"\r
-#restapi_port: 5000\r
-\r
-## Testing mode\r
-# enable this mode _only_ when you have a single node\r
-# if you don't want it keep the option commented\r
-#common_single_host_mode: true\r
-\r
-## Handlers - restarting daemons after a config change\r
-# if for whatever reasons the content of your ceph configuration changes\r
-# ceph daemons will be restarted as well. At the moment, we can not detect\r
-# which config option changed so all the daemons will be restarted. Although\r
-# this restart will be serialized for each node, in between a health check\r
-# will be performed so we make sure we don't move to the next node until\r
-# ceph is not healthy\r
-# Obviously between the checks (for monitors to be in quorum and for osd's pgs\r
-# to be clean) we have to wait. These retries and delays can be configurable\r
-# for both monitors and osds.\r
-#\r
-# Monitor handler checks\r
-#handler_health_mon_check_retries: 5\r
-#handler_health_mon_check_delay: 10\r
-#\r
-# OSD handler checks\r
-#handler_health_osd_check_retries: 40\r
-#handler_health_osd_check_delay: 30\r
-#handler_health_osd_check: true\r
-#\r
-# MDS handler checks\r
-#handler_health_mds_check_retries: 5\r
-#handler_health_mds_check_delay: 10\r
-#\r
-# RGW handler checks\r
-#handler_health_rgw_check_retries: 5\r
-#handler_health_rgw_check_delay: 10\r
-\r
-# NFS handler checks\r
-#handler_health_nfs_check_retries: 5\r
-#handler_health_nfs_check_delay: 10\r
-\r
-# RBD MIRROR handler checks\r
-#handler_health_rbd_mirror_check_retries: 5\r
-#handler_health_rbd_mirror_check_delay: 10\r
-\r
-# MGR handler checks\r
-#handler_health_mgr_check_retries: 5\r
-#handler_health_mgr_check_delay: 10\r
-\r
-###############\r
-# NFS-GANESHA #\r
-###############\r
-\r
-# Confiure the type of NFS gatway access. At least one must be enabled for an\r
-# NFS role to be useful\r
-#\r
-# Set this to true to enable File access via NFS. Requires an MDS role.\r
-#nfs_file_gw: false\r
-# Set this to true to enable Object access via NFS. Requires an RGW role.\r
-#nfs_obj_gw: true\r
-\r
-###################\r
-# CONFIG OVERRIDE #\r
-###################\r
-\r
-# Ceph configuration file override.\r
-# This allows you to specify more configuration options\r
-# using an INI style format.\r
-# The following sections are supported: [global], [mon], [osd], [mds], [rgw]\r
-#\r
-# Example:\r
-# ceph_conf_overrides:\r
-# global:\r
-# foo: 1234\r
-# bar: 5678\r
-#\r
-#ceph_conf_overrides: {}\r
-\r
-\r
-#############\r
-# OS TUNING #\r
-#############\r
-\r
-#disable_transparent_hugepage: true\r
-#os_tuning_params:\r
-# - { name: kernel.pid_max, value: 4194303 }\r
-# - { name: fs.file-max, value: 26234859 }\r
-# - { name: vm.zone_reclaim_mode, value: 0 }\r
-# - { name: vm.swappiness, value: 10 }\r
-# - { name: vm.min_free_kbytes, value: "{{ vm_min_free_kbytes }}" }\r
-\r
-# For Debian & Red Hat/CentOS installs set TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES\r
-# Set this to a byte value (e.g. 134217728)\r
-# A value of 0 will leave the package default.\r
-#ceph_tcmalloc_max_total_thread_cache: 0\r
-\r
-\r
-##########\r
-# DOCKER #\r
-##########\r
-#docker_exec_cmd:\r
-#docker: false\r
-#ceph_docker_image: "ceph/daemon"\r
-#ceph_docker_image_tag: latest\r
-#ceph_docker_registry: docker.io\r
-#ceph_docker_enable_centos_extra_repo: false\r
-#ceph_docker_on_openstack: false\r
-#ceph_mon_docker_interface: "{{ monitor_interface }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#ceph_mon_docker_subnet: "{{ public_network }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#mon_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#osd_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#mds_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#rgw_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#containerized_deployment: "{{ True if mon_containerized_deployment or osd_containerized_deployment or mds_containerized_deployment or rgw_containerized_deployment else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-\r
-\r
-############\r
-# KV store #\r
-############\r
-#containerized_deployment_with_kv: false\r
-#mon_containerized_default_ceph_conf_with_kv: false\r
-#kv_type: etcd\r
-#kv_endpoint: 127.0.0.1\r
-#kv_port: 2379\r
-\r
-\r
-# this is only here for usage with the rolling_update.yml playbook\r
-# do not ever change this here\r
-#rolling_update: false\r
-\r
-\r
+---
+# Variables here are applicable to all host groups NOT roles
+
+# This sample file generated by generate_group_vars_sample.sh
+
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+# You can override vars by using host or group vars
+
+###########
+# GENERAL #
+###########
+
+######################################
+# Releases name to number dictionary #
+######################################
+#ceph_release_num:
+# dumpling: 0.67
+# emperor: 0.72
+# firefly: 0.80
+# giant: 0.87
+# hammer: 0.94
+# infernalis: 9
+# jewel: 10
+# kraken: 11
+# luminous: 12
+# mimic: 13
+
+# Directory to fetch cluster fsid, keys etc...
+#fetch_directory: fetch/
+
+# The 'cluster' variable determines the name of the cluster.
+# Changing the default value to something else means that you will
+# need to change all the command line calls as well, for example if
+# your cluster name is 'foo':
+# "ceph health" will become "ceph --cluster foo health"
+#
+# An easier way to handle this is to use the environment variable CEPH_ARGS
+# So run: "export CEPH_ARGS="--cluster foo"
+# With that you will be able to run "ceph health" normally
+#cluster: ceph
+
+# Inventory host group variables
+#mon_group_name: mons
+#osd_group_name: osds
+#rgw_group_name: rgws
+#mds_group_name: mdss
+#nfs_group_name: nfss
+#restapi_group_name: restapis
+#rbdmirror_group_name: rbdmirrors
+#client_group_name: clients
+#iscsi_gw_group_name: iscsi-gws
+#mgr_group_name: mgrs
+
+# If check_firewall is true, then ansible will try to determine if the
+# Ceph ports are blocked by a firewall. If the machine running ansible
+# cannot reach the Ceph ports for some other reason, you may need or
+# want to set this to False to skip those checks.
+#check_firewall: False
+
+
+############
+# PACKAGES #
+############
+#debian_package_dependencies:
+# - python-pycurl
+# - hdparm
+
+#centos_package_dependencies:
+# - python-pycurl
+# - hdparm
+# - epel-release
+# - python-setuptools
+# - libselinux-python
+
+#redhat_package_dependencies:
+# - python-pycurl
+# - hdparm
+# - python-setuptools
+
+# Whether or not to install the ceph-test package.
+#ceph_test: false
+
+# Enable the ntp service by default to avoid clock skew on
+# ceph nodes
+#ntp_service_enabled: true
+
+# Set uid/gid to default '64045' for bootstrap directories.
+# '64045' is used for debian based distros. It must be set to 167 in case of rhel based distros.
+# These values have to be set according to the base OS used by the container image, NOT the host.
+#bootstrap_dirs_owner: "64045"
+#bootstrap_dirs_group: "64045"
+
+# This variable determines if ceph packages can be updated. If False, the
+# package resources will use "state=present". If True, they will use
+# "state=latest".
+#upgrade_ceph_packages: False
+
+#ceph_use_distro_backports: false # DEBIAN ONLY
+
+
+###########
+# INSTALL #
+###########
+#ceph_rhcs_cdn_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_repository_type: "{{ 'cdn' if ceph_rhcs_cdn_install else 'iso' if ceph_rhcs_iso_install else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_rhcs_iso_install: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_rhcs: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_stable: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_dev: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_stable_uca: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_custom: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+
+# ORIGIN SOURCE
+#
+# Choose between:
+# - 'repository' means that you will get ceph installed through a new repository. Later below choose between 'community', 'rhcs' or 'dev'
+# - 'distro' means that no separate repo file will be added
+# you will get whatever version of Ceph is included in your Linux distro.
+# 'local' means that the ceph binaries will be copied over from the local machine
+#ceph_origin: "{{ 'repository' if ceph_rhcs or ceph_stable or ceph_dev or ceph_stable_uca or ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#valid_ceph_origins:
+# - repository
+# - distro
+# - local
+ceph_origin: repository
+ceph_repository: community
+
+#ceph_repository: "{{ 'community' if ceph_stable else 'rhcs' if ceph_rhcs else 'dev' if ceph_dev else 'uca' if ceph_stable_uca else 'custom' if ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#valid_ceph_repository:
+# - community
+# - rhcs
+# - dev
+# - uca
+# - custom
+
+
+# REPOSITORY: COMMUNITY VERSION
+#
+# Enabled when ceph_repository == 'community'
+#
+#ceph_mirror: http://download.ceph.com
+#ceph_stable_key: https://download.ceph.com/keys/release.asc
+ceph_stable_release: luminous
+#ceph_stable_repo: "{{ ceph_mirror }}/debian-{{ ceph_stable_release }}"
+
+#nfs_ganesha_stable: true # use stable repos for nfs-ganesha
+#nfs_ganesha_stable_branch: V2.5-stable
+#nfs_ganesha_stable_deb_repo: "{{ ceph_mirror }}/nfs-ganesha/deb-{{ nfs_ganesha_stable_branch }}/{{ ceph_stable_release }}"
+
+
+# Use the option below to specify your applicable package tree, eg. when using non-LTS Ubuntu versions
+# # for a list of available Debian distributions, visit http://download.ceph.com/debian-{{ ceph_stable_release }}/dists/
+# for more info read: https://github.com/ceph/ceph-ansible/issues/305
+#ceph_stable_distro_source: "{{ ansible_lsb.codename }}"
+
+# This option is needed for _both_ stable and dev version, so please always fill the right version
+# # for supported distros, see http://download.ceph.com/rpm-{{ ceph_stable_release }}/
+#ceph_stable_redhat_distro: el7
+
+
+# REPOSITORY: RHCS VERSION RED HAT STORAGE (from 1.3)
+#
+# Enabled when ceph_repository == 'rhcs'
+#
+# This version is only supported on RHEL >= 7.1
+# As of RHEL 7.1, libceph.ko and rbd.ko are now included in Red Hat's kernel
+# packages natively. The RHEL 7.1 kernel packages are more stable and secure than
+# using these 3rd-party kmods with RHEL 7.0. Please update your systems to RHEL
+# 7.1 or later if you want to use the kernel RBD client.
+#
+# The CephFS kernel client is undergoing rapid development upstream, and we do
+# not recommend running the CephFS kernel module on RHEL 7's 3.10 kernel at this
+# time. Please use ELRepo's latest upstream 4.x kernels if you want to run CephFS
+# on RHEL 7.
+#
+#
+#ceph_rhcs_version: "{{ ceph_stable_rh_storage_version | default(2) }}"
+#valid_ceph_repository_type:
+# - cdn
+# - iso
+#ceph_rhcs_iso_path: "{{ ceph_stable_rh_storage_iso_path | default('') }}"
+#ceph_rhcs_mount_path: "{{ ceph_stable_rh_storage_mount_path | default('/tmp/rh-storage-mount') }}"
+#ceph_rhcs_repository_path: "{{ ceph_stable_rh_storage_repository_path | default('/tmp/rh-storage-repo') }}" # where to copy iso's content
+
+# RHCS installation in Debian systems
+#ceph_rhcs_cdn_debian_repo: https://customername:customerpasswd@rhcs.download.redhat.com
+#ceph_rhcs_cdn_debian_repo_version: "/3-release/" # for GA, later for updates use /3-updates/
+
+
+# REPOSITORY: UBUNTU CLOUD ARCHIVE
+#
+# Enabled when ceph_repository == 'uca'
+#
+# This allows the install of Ceph from the Ubuntu Cloud Archive. The Ubuntu Cloud Archive
+# usually has newer Ceph releases than the normal distro repository.
+#
+#
+#ceph_stable_repo_uca: "http://ubuntu-cloud.archive.canonical.com/ubuntu"
+#ceph_stable_openstack_release_uca: liberty
+#ceph_stable_release_uca: "{{ansible_lsb.codename}}-updates/{{ceph_stable_openstack_release_uca}}"
+
+
+# REPOSITORY: DEV
+#
+# Enabled when ceph_repository == 'dev'
+#
+#ceph_dev_branch: master # development branch you would like to use e.g: master, wip-hack
+#ceph_dev_sha1: latest # distinct sha1 to use, defaults to 'latest' (as in latest built)
+
+#nfs_ganesha_dev: false # use development repos for nfs-ganesha
+
+# Set this to choose the version of ceph dev libraries used in the nfs-ganesha packages from shaman
+# flavors so far include: ceph_master, ceph_jewel, ceph_kraken, ceph_luminous
+#nfs_ganesha_flavor: "ceph_master"
+
+#ceph_iscsi_config_dev: true # special repo for deploying iSCSI gateways
+
+
+# REPOSITORY: CUSTOM
+#
+# Enabled when ceph_repository == 'custom'
+#
+# Use a custom repository to install ceph. For RPM, ceph_custom_repo should be
+# a URL to the .repo file to be installed on the targets. For deb,
+# ceph_custom_repo should be the URL to the repo base.
+#
+#ceph_custom_repo: https://server.domain.com/ceph-custom-repo
+
+
+# ORIGIN: LOCAL CEPH INSTALLATION
+#
+# Enabled when ceph_repository == 'local'
+#
+# Path to DESTDIR of the ceph install
+#ceph_installation_dir: "/path/to/ceph_installation/"
+# Whether or not to use installer script rundep_installer.sh
+# This script takes in rundep and installs the packages line by line onto the machine
+# If this is set to false then it is assumed that the machine ceph is being copied onto will already have
+# all runtime dependencies installed
+#use_installer: false
+# Root directory for ceph-ansible
+#ansible_dir: "/path/to/ceph-ansible"
+
+
+######################
+# CEPH CONFIGURATION #
+######################
+
+## Ceph options
+#
+# Each cluster requires a unique, consistent filesystem ID. By
+# default, the playbook generates one for you and stores it in a file
+# in `fetch_directory`. If you want to customize how the fsid is
+# generated, you may find it useful to disable fsid generation to
+# avoid cluttering up your ansible repo. If you set `generate_fsid` to
+# false, you *must* generate `fsid` in another way.
+# ACTIVATE THE FSID VARIABLE FOR NON-VAGRANT DEPLOYMENT
+#fsid: "{{ cluster_uuid.stdout }}"
+#generate_fsid: true
+
+#ceph_conf_key_directory: /etc/ceph
+
+#cephx: true
+
+## Client options
+#
+#rbd_cache: "true"
+#rbd_cache_writethrough_until_flush: "true"
+#rbd_concurrent_management_ops: 20
+
+#rbd_client_directories: true # this will create rbd_client_log_path and rbd_client_admin_socket_path directories with proper permissions
+
+# Permissions for the rbd_client_log_path and
+# rbd_client_admin_socket_path. Depending on your use case for Ceph
+# you may want to change these values. The default, which is used if
+# any of the variables are unset or set to a false value (like `null`
+# or `false`) is to automatically determine what is appropriate for
+# the Ceph version with non-OpenStack workloads -- ceph:ceph and 0770
+# for infernalis releases, and root:root and 1777 for pre-infernalis
+# releases.
+#
+# For other use cases, including running Ceph with OpenStack, you'll
+# want to set these differently:
+#
+# For OpenStack on RHEL, you'll want:
+# rbd_client_directory_owner: "qemu"
+# rbd_client_directory_group: "libvirtd" (or "libvirt", depending on your version of libvirt)
+# rbd_client_directory_mode: "0755"
+#
+# For OpenStack on Ubuntu or Debian, set:
+# rbd_client_directory_owner: "libvirt-qemu"
+# rbd_client_directory_group: "kvm"
+# rbd_client_directory_mode: "0755"
+#
+# If you set rbd_client_directory_mode, you must use a string (e.g.,
+# 'rbd_client_directory_mode: "0755"', *not*
+# 'rbd_client_directory_mode: 0755', or Ansible will complain: mode
+# must be in octal or symbolic form
+#rbd_client_directory_owner: null
+#rbd_client_directory_group: null
+#rbd_client_directory_mode: null
+
+#rbd_client_log_path: /var/log/ceph
+#rbd_client_log_file: "{{ rbd_client_log_path }}/qemu-guest-$pid.log" # must be writable by QEMU and allowed by SELinux or AppArmor
+#rbd_client_admin_socket_path: /var/run/ceph # must be writable by QEMU and allowed by SELinux or AppArmor
+
+## Monitor options
+#
+# You must define either monitor_interface, monitor_address or monitor_address_block.
+# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).
+# Eg. If you want to specify for each monitor which address the monitor will bind to you can set it in your **inventory host file** by using 'monitor_address' variable.
+# Preference will go to monitor_address if both monitor_address and monitor_interface are defined.
+# To use an IPv6 address, use the monitor_address setting instead (and set ip_version to ipv6)
+monitor_interface: ens3
+#monitor_address: 0.0.0.0
+#monitor_address_block: subnet
+# set to either ipv4 or ipv6, whichever your network is using
+#ip_version: ipv4
+#mon_use_fqdn: false # if set to true, the MON name used will be the fqdn in the ceph.conf
+
+## OSD options
+#
+journal_size: 100 # OSD journal size in MB
+public_network: 100.64.128.40/24
+cluster_network: "{{ public_network }}"
+#osd_mkfs_type: xfs
+#osd_mkfs_options_xfs: -f -i size=2048
+#osd_mount_options_xfs: noatime,largeio,inode64,swalloc
+#osd_objectstore: filestore
+
+# xattrs. by default, 'filestore xattr use omap' is set to 'true' if
+# 'osd_mkfs_type' is set to 'ext4'; otherwise it isn't set. This can
+# be set to 'true' or 'false' to explicitly override those
+# defaults. Leave it 'null' to use the default for your chosen mkfs
+# type.
+#filestore_xattr_use_omap: null
+
+## MDS options
+#
+#mds_use_fqdn: false # if set to true, the MDS name used will be the fqdn in the ceph.conf
+#mds_allow_multimds: false
+#mds_max_mds: 3
+
+## Rados Gateway options
+#
+#radosgw_dns_name: your.subdomain.tld # subdomains used by radosgw. See http://ceph.com/docs/master/radosgw/config/#enabling-subdomain-s3-calls
+#radosgw_resolve_cname: false # enable for radosgw to resolve DNS CNAME based bucket names
+#radosgw_civetweb_port: 8080
+#radosgw_civetweb_num_threads: 100
+# For additional civetweb configuration options available such as SSL, logging,
+# keepalive, and timeout settings, please see the civetweb docs at
+# https://github.com/civetweb/civetweb/blob/master/docs/UserManual.md
+#radosgw_civetweb_options: "num_threads={{ radosgw_civetweb_num_threads }}"
+# You must define either radosgw_interface, radosgw_address.
+# These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).
+# Eg. If you want to specify for each radosgw node which address the radosgw will bind to you can set it in your **inventory host file** by using 'radosgw_address' variable.
+# Preference will go to radosgw_address if both radosgw_address and radosgw_interface are defined.
+# To use an IPv6 address, use the radosgw_address setting instead (and set ip_version to ipv6)
+#radosgw_interface: interface
+#radosgw_address: "{{ '0.0.0.0' if rgw_containerized_deployment else 'address' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#radosgw_address_block: subnet
+#radosgw_keystone: false # activate OpenStack Keystone options full detail here: http://ceph.com/docs/master/radosgw/keystone/
+# Rados Gateway options
+#email_address: foo@bar.com
+
+## REST API options
+#
+#restapi_interface: "{{ monitor_interface }}"
+#restapi_address: "{{ monitor_address }}"
+#restapi_port: 5000
+
+## Testing mode
+# enable this mode _only_ when you have a single node
+# if you don't want it keep the option commented
+#common_single_host_mode: true
+
+## Handlers - restarting daemons after a config change
+# if for whatever reasons the content of your ceph configuration changes
+# ceph daemons will be restarted as well. At the moment, we can not detect
+# which config option changed so all the daemons will be restarted. Although
+# this restart will be serialized for each node, in between a health check
+# will be performed so we make sure we don't move to the next node until
+# ceph is not healthy
+# Obviously between the checks (for monitors to be in quorum and for osd's pgs
+# to be clean) we have to wait. These retries and delays can be configurable
+# for both monitors and osds.
+#
+# Monitor handler checks
+#handler_health_mon_check_retries: 5
+#handler_health_mon_check_delay: 10
+#
+# OSD handler checks
+#handler_health_osd_check_retries: 40
+#handler_health_osd_check_delay: 30
+#handler_health_osd_check: true
+#
+# MDS handler checks
+#handler_health_mds_check_retries: 5
+#handler_health_mds_check_delay: 10
+#
+# RGW handler checks
+#handler_health_rgw_check_retries: 5
+#handler_health_rgw_check_delay: 10
+
+# NFS handler checks
+#handler_health_nfs_check_retries: 5
+#handler_health_nfs_check_delay: 10
+
+# RBD MIRROR handler checks
+#handler_health_rbd_mirror_check_retries: 5
+#handler_health_rbd_mirror_check_delay: 10
+
+# MGR handler checks
+#handler_health_mgr_check_retries: 5
+#handler_health_mgr_check_delay: 10
+
+###############
+# NFS-GANESHA #
+###############
+
+# Confiure the type of NFS gatway access. At least one must be enabled for an
+# NFS role to be useful
+#
+# Set this to true to enable File access via NFS. Requires an MDS role.
+#nfs_file_gw: false
+# Set this to true to enable Object access via NFS. Requires an RGW role.
+#nfs_obj_gw: true
+
+###################
+# CONFIG OVERRIDE #
+###################
+
+# Ceph configuration file override.
+# This allows you to specify more configuration options
+# using an INI style format.
+# The following sections are supported: [global], [mon], [osd], [mds], [rgw]
+#
+# Example:
+# ceph_conf_overrides:
+# global:
+# foo: 1234
+# bar: 5678
+#
+#ceph_conf_overrides: {}
+
+
+#############
+# OS TUNING #
+#############
+
+#disable_transparent_hugepage: true
+#os_tuning_params:
+# - { name: kernel.pid_max, value: 4194303 }
+# - { name: fs.file-max, value: 26234859 }
+# - { name: vm.zone_reclaim_mode, value: 0 }
+# - { name: vm.swappiness, value: 10 }
+# - { name: vm.min_free_kbytes, value: "{{ vm_min_free_kbytes }}" }
+
+# For Debian & Red Hat/CentOS installs set TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES
+# Set this to a byte value (e.g. 134217728)
+# A value of 0 will leave the package default.
+#ceph_tcmalloc_max_total_thread_cache: 0
+
+
+##########
+# DOCKER #
+##########
+#docker_exec_cmd:
+#docker: false
+#ceph_docker_image: "ceph/daemon"
+#ceph_docker_image_tag: latest
+#ceph_docker_registry: docker.io
+#ceph_docker_enable_centos_extra_repo: false
+#ceph_docker_on_openstack: false
+#ceph_mon_docker_interface: "{{ monitor_interface }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#ceph_mon_docker_subnet: "{{ public_network }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#mon_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#osd_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#mds_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#rgw_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#containerized_deployment: "{{ True if mon_containerized_deployment or osd_containerized_deployment or mds_containerized_deployment or rgw_containerized_deployment else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+
+
+############
+# KV store #
+############
+#containerized_deployment_with_kv: false
+#mon_containerized_default_ceph_conf_with_kv: false
+#kv_type: etcd
+#kv_endpoint: 127.0.0.1
+#kv_port: 2379
+
+
+# this is only here for usage with the rolling_update.yml playbook
+# do not ever change this here
+#rolling_update: false
+
+
-[mons]\r
-localhost ansible_connection=local\r
-\r
-[osds]\r
-localhost ansible_connection=local\r
-\r
-[mgrs]\r
-localhost ansible_connection=local\r
+[mons]
+localhost ansible_connection=local
+
+[osds]
+localhost ansible_connection=local
+
+[mgrs]
+localhost ansible_connection=local
-configFile: /etc/ceph/ceph.conf\r
-pool:\r
- "rbd": # change pool name same to ceph pool, but don't change it if you choose lvm backend\r
- diskType: SSD\r
+configFile: /etc/ceph/ceph.conf
+pool:
+ "rbd": # change pool name same to ceph pool, but don't change it if you choose lvm backend
+ diskType: SSD
AZ: default
\ No newline at end of file
----\r
-# Variables here are applicable to all host groups NOT roles\r
-\r
-# This sample file generated by generate_group_vars_sample.sh\r
-\r
-# Dummy variable to avoid error because ansible does not recognize the\r
-# file as a good configuration file when no variable in it.\r
-dummy:\r
-\r
-# You can override default vars defined in defaults/main.yml here,\r
-# but I would advice to use host or group vars instead\r
-\r
-#raw_journal_devices: "{{ dedicated_devices }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#raw_multi_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#dmcrytpt_journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#dmcrypt_dedicated_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-\r
-\r
-###########\r
-# GENERAL #\r
-###########\r
-\r
-# Even though OSD nodes should not have the admin key\r
-# at their disposal, some people might want to have it\r
-# distributed on OSD nodes. Setting 'copy_admin_key' to 'true'\r
-# will copy the admin key to the /etc/ceph/ directory\r
-#copy_admin_key: false\r
-\r
-\r
-####################\r
-# OSD CRUSH LOCATION\r
-####################\r
-\r
-# /!\\r
-#\r
-# BE EXTREMELY CAREFUL WITH THIS OPTION\r
-# DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING\r
-#\r
-# /!\\r
-#\r
-# It is probably best to keep this option to 'false' as the default\r
-# suggests it. This option should only be used while doing some complex\r
-# CRUSH map. It allows you to force a specific location for a set of OSDs.\r
-#\r
-# The following options will build a ceph.conf with OSD sections\r
-# Example:\r
-# [osd.X]\r
-# osd crush location = "root=location"\r
-#\r
-# This works with your inventory file\r
-# To match the following 'osd_crush_location' option the inventory must look like:\r
-#\r
-# [osds]\r
-# osd0 ceph_crush_root=foo ceph_crush_rack=bar\r
-\r
-#crush_location: false\r
-#osd_crush_location: "\"root={{ ceph_crush_root }} rack={{ ceph_crush_rack }} host={{ ansible_hostname }}\""\r
-\r
-\r
-##############\r
-# CEPH OPTIONS\r
-##############\r
-\r
-# Devices to be used as OSDs\r
-# You can pre-provision disks that are not present yet.\r
-# Ansible will just skip them. Newly added disk will be\r
-# automatically configured during the next run.\r
-#\r
-\r
-\r
-# Declare devices to be used as OSDs\r
-# All scenario(except 3rd) inherit from the following device declaration\r
-\r
-devices:\r
-# - /dev/sda\r
-# - /dev/sdc\r
-# - /dev/sdd\r
-# - /dev/sde\r
-\r
-#devices: []\r
-\r
-\r
-#'osd_auto_discovery' mode prevents you from filling out the 'devices' variable above.\r
-# You can use this option with First and Forth and Fifth OSDS scenario.\r
-# Device discovery is based on the Ansible fact 'ansible_devices'\r
-# which reports all the devices on a system. If chosen all the disks\r
-# found will be passed to ceph-disk. You should not be worried on using\r
-# this option since ceph-disk has a built-in check which looks for empty devices.\r
-# Thus devices with existing partition tables will not be used.\r
-#\r
-#osd_auto_discovery: false\r
-\r
-# Encrypt your OSD device using dmcrypt\r
-# If set to True, no matter which osd_objecstore and osd_scenario you use the data will be encrypted\r
-#dmcrypt: "{{ True if dmcrytpt_journal_collocation or dmcrypt_dedicated_journal else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-\r
-\r
-# I. First scenario: collocated\r
-#\r
-# To enable this scenario do: osd_scenario: collocated\r
-#\r
-#\r
-# If osd_objectstore: filestore is enabled both 'ceph data' and 'ceph journal' partitions\r
-# will be stored on the same device.\r
-#\r
-# If osd_objectstore: bluestore is enabled 'ceph data', 'ceph block', 'ceph block.db', 'ceph block.wal' will be stored\r
-# on the same device. The device will get 2 partitions:\r
-# - One for 'data', called 'ceph data'\r
-# - One for 'ceph block', 'ceph block.db', 'ceph block.wal' called 'ceph block'\r
-#\r
-# Example of what you will get:\r
-# [root@ceph-osd0 ~]# blkid /dev/sda*\r
-# /dev/sda: PTTYPE="gpt"\r
-# /dev/sda1: UUID="9c43e346-dd6e-431f-92d8-cbed4ccb25f6" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="749c71c9-ed8f-4930-82a7-a48a3bcdb1c7"\r
-# /dev/sda2: PARTLABEL="ceph block" PARTUUID="e6ca3e1d-4702-4569-abfa-e285de328e9d"\r
-#\r
-\r
-#osd_scenario: "{{ 'collocated' if journal_collocation or dmcrytpt_journal_collocation else 'non-collocated' if raw_multi_journal or dmcrypt_dedicated_journal else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1\r
-#valid_osd_scenarios:\r
-# - collocated\r
-# - non-collocated\r
-# - lvm\r
-osd_scenario: collocated\r
-\r
-# II. Second scenario: non-collocated\r
-#\r
-# To enable this scenario do: osd_scenario: non-collocated\r
-#\r
-# If osd_objectstore: filestore is enabled 'ceph data' and 'ceph journal' partitions\r
-# will be stored on different devices:\r
-# - 'ceph data' will be stored on the device listed in 'devices'\r
-# - 'ceph journal' will be stored on the device listed in 'dedicated_devices'\r
-#\r
-# Let's take an example, imagine 'devices' was declared like this:\r
-#\r
-# devices:\r
-# - /dev/sda\r
-# - /dev/sdb\r
-# - /dev/sdc\r
-# - /dev/sdd\r
-#\r
-# And 'dedicated_devices' was declared like this:\r
-#\r
-# dedicated_devices:\r
-# - /dev/sdf\r
-# - /dev/sdf\r
-# - /dev/sdg\r
-# - /dev/sdg\r
-#\r
-# This will result in the following mapping:\r
-# - /dev/sda will have /dev/sdf1 as journal\r
-# - /dev/sdb will have /dev/sdf2 as a journal\r
-# - /dev/sdc will have /dev/sdg1 as a journal\r
-# - /dev/sdd will have /dev/sdg2 as a journal\r
-#\r
-#\r
-# If osd_objectstore: bluestore is enabled, both 'ceph block.db' and 'ceph block.wal' partitions will be stored\r
-# on a dedicated device.\r
-#\r
-# So the following will happen:\r
-# - The devices listed in 'devices' will get 2 partitions, one for 'block' and one for 'data'.\r
-# 'data' is only 100MB big and do not store any of your data, it's just a bunch of Ceph metadata.\r
-# 'block' will store all your actual data.\r
-# - The devices in 'dedicated_devices' will get 1 partition for RocksDB DB, called 'block.db'\r
-# and one for RocksDB WAL, called 'block.wal'\r
-#\r
-# By default dedicated_devices will represent block.db\r
-#\r
-# Example of what you will get:\r
-# [root@ceph-osd0 ~]# blkid /dev/sd*\r
-# /dev/sda: PTTYPE="gpt"\r
-# /dev/sda1: UUID="c6821801-2f21-4980-add0-b7fc8bd424d5" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="f2cc6fa8-5b41-4428-8d3f-6187453464d0"\r
-# /dev/sda2: PARTLABEL="ceph block" PARTUUID="ea454807-983a-4cf2-899e-b2680643bc1c"\r
-# /dev/sdb: PTTYPE="gpt"\r
-# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="af5b2d74-4c08-42cf-be57-7248c739e217"\r
-# /dev/sdb2: PARTLABEL="ceph block.wal" PARTUUID="af3f8327-9aa9-4c2b-a497-cf0fe96d126a"\r
-#dedicated_devices: []\r
-\r
-\r
-# More device granularity for Bluestore\r
-#\r
-# ONLY if osd_objectstore: bluestore is enabled.\r
-#\r
-# By default, if 'bluestore_wal_devices' is empty, it will get the content of 'dedicated_devices'.\r
-# If set, then you will have a dedicated partition on a specific device for block.wal.\r
-#\r
-# Example of what you will get:\r
-# [root@ceph-osd0 ~]# blkid /dev/sd*\r
-# /dev/sda: PTTYPE="gpt"\r
-# /dev/sda1: UUID="39241ae9-d119-4335-96b3-0898da8f45ce" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="961e7313-bdb7-49e7-9ae7-077d65c4c669"\r
-# /dev/sda2: PARTLABEL="ceph block" PARTUUID="bff8e54e-b780-4ece-aa16-3b2f2b8eb699"\r
-# /dev/sdb: PTTYPE="gpt"\r
-# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="0734f6b6-cc94-49e9-93de-ba7e1d5b79e3"\r
-# /dev/sdc: PTTYPE="gpt"\r
-# /dev/sdc1: PARTLABEL="ceph block.wal" PARTUUID="824b84ba-6777-4272-bbbd-bfe2a25cecf3"\r
-#bluestore_wal_devices: "{{ dedicated_devices }}"\r
-\r
-# III. Use ceph-volume to create OSDs from logical volumes.\r
-# Use 'osd_scenario: lvm' to enable this scenario. Currently we only support dedicated journals\r
-# when using lvm, not collocated journals.\r
-# lvm_volumes is a list of dictionaries. Each dictionary must contain a data, journal and vg_name\r
-# key. Any logical volume or logical group used must be a name and not a path.\r
-# data must be a logical volume\r
-# journal can be either a lv, device or partition. You can not use the same journal for many data lvs.\r
-# data_vg must be the volume group name of the data lv\r
-# journal_vg is optional and must be the volume group name of the journal lv, if applicable\r
-# For example:\r
-# lvm_volumes:\r
-# - data: data-lv1\r
-# data_vg: vg1\r
-# journal: journal-lv1\r
-# journal_vg: vg2\r
-# - data: data-lv2\r
-# journal: /dev/sda\r
-# data_vg: vg1\r
-# - data: data-lv3\r
-# journal: /dev/sdb1\r
-# data_vg: vg2\r
-#lvm_volumes: []\r
-\r
-\r
-##########\r
-# DOCKER #\r
-##########\r
-\r
-#ceph_config_keys: [] # DON'T TOUCH ME\r
-\r
-# Resource limitation\r
-# For the whole list of limits you can apply see: docs.docker.com/engine/admin/resource_constraints\r
-# Default values are based from: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html/red_hat_ceph_storage_hardware_guide/minimum_recommendations\r
-# These options can be passed using the 'ceph_osd_docker_extra_env' variable.\r
-#ceph_osd_docker_memory_limit: 1g\r
-#ceph_osd_docker_cpu_limit: 1\r
-\r
-# PREPARE DEVICE\r
-#\r
-# WARNING /!\ DMCRYPT scenario ONLY works with Docker version 1.12.5 and above\r
-#\r
-#ceph_osd_docker_devices: "{{ devices }}"\r
-#ceph_osd_docker_prepare_env: -e OSD_JOURNAL_SIZE={{ journal_size }}\r
-\r
-# ACTIVATE DEVICE\r
-#\r
-#ceph_osd_docker_extra_env:\r
-#ceph_osd_docker_run_script_path: "/usr/share" # script called by systemd to run the docker command\r
-\r
-\r
-###########\r
-# SYSTEMD #\r
-###########\r
-\r
-# ceph_osd_systemd_overrides will override the systemd settings\r
-# for the ceph-osd services.\r
-# For example,to set "PrivateDevices=false" you can specify:\r
-#ceph_osd_systemd_overrides:\r
-# Service:\r
-# PrivateDevices: False\r
-\r
+---
+# Variables here are applicable to all host groups NOT roles
+
+# This sample file generated by generate_group_vars_sample.sh
+
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+# You can override default vars defined in defaults/main.yml here,
+# but I would advice to use host or group vars instead
+
+#raw_journal_devices: "{{ dedicated_devices }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#raw_multi_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#dmcrytpt_journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+#dmcrypt_dedicated_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1
+
+
+###########
+# GENERAL #
+###########
+
+# Even though OSD nodes should not have the admin key
+# at their disposal, some people might want to have it
+# distributed on OSD nodes. Setting 'copy_admin_key' to 'true'
+# will copy the admin key to the /etc/ceph/ directory
+#copy_admin_key: false
+
+
+####################
+# OSD CRUSH LOCATION
+####################
+
+# /!\
+#
+# BE EXTREMELY CAREFUL WITH THIS OPTION
+# DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING
+#
+# /!\
+#
+# It is probably best to keep this option to 'false' as the default
+# suggests it. This option should only be used while doing some complex
+# CRUSH map. It allows you to force a specific location for a set of OSDs.
+#
+# The following options will build a ceph.conf with OSD sections
+# Example:
+# [osd.X]
+# osd crush location = "root=location"
+#
+# This works with your inventory file
+# To match the following 'osd_crush_location' option the inventory must look like:
+#
+# [osds]
+# osd0 ceph_crush_root=foo ceph_crush_rack=bar
+
+#crush_location: false
+#osd_crush_location: "\"root={{ ceph_crush_root }} rack={{ ceph_crush_rack }} host={{ ansible_hostname }}\""
+
+
+##############
+# CEPH OPTIONS
+##############
+
+# Devices to be used as OSDs
+# You can pre-provision disks that are not present yet.
+# Ansible will just skip them. Newly added disk will be
+# automatically configured during the next run.
+#
+
+
+# Declare devices to be used as OSDs
+# All scenario(except 3rd) inherit from the following device declaration
+
+devices:
+# - /dev/sda
+# - /dev/sdc
+# - /dev/sdd
+# - /dev/sde
+
+#devices: []
+
+
+#'osd_auto_discovery' mode prevents you from filling out the 'devices' variable above.
+# You can use this option with First and Forth and Fifth OSDS scenario.
+# Device discovery is based on the Ansible fact 'ansible_devices'
+# which reports all the devices on a system. If chosen all the disks
+# found will be passed to ceph-disk. You should not be worried on using
+# this option since ceph-disk has a built-in check which looks for empty devices.
+# Thus devices with existing partition tables will not be used.
+#
+#osd_auto_discovery: false
+
+# Encrypt your OSD device using dmcrypt
+# If set to True, no matter which osd_objecstore and osd_scenario you use the data will be encrypted
+#dmcrypt: "{{ True if dmcrytpt_journal_collocation or dmcrypt_dedicated_journal else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+
+
+# I. First scenario: collocated
+#
+# To enable this scenario do: osd_scenario: collocated
+#
+#
+# If osd_objectstore: filestore is enabled both 'ceph data' and 'ceph journal' partitions
+# will be stored on the same device.
+#
+# If osd_objectstore: bluestore is enabled 'ceph data', 'ceph block', 'ceph block.db', 'ceph block.wal' will be stored
+# on the same device. The device will get 2 partitions:
+# - One for 'data', called 'ceph data'
+# - One for 'ceph block', 'ceph block.db', 'ceph block.wal' called 'ceph block'
+#
+# Example of what you will get:
+# [root@ceph-osd0 ~]# blkid /dev/sda*
+# /dev/sda: PTTYPE="gpt"
+# /dev/sda1: UUID="9c43e346-dd6e-431f-92d8-cbed4ccb25f6" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="749c71c9-ed8f-4930-82a7-a48a3bcdb1c7"
+# /dev/sda2: PARTLABEL="ceph block" PARTUUID="e6ca3e1d-4702-4569-abfa-e285de328e9d"
+#
+
+#osd_scenario: "{{ 'collocated' if journal_collocation or dmcrytpt_journal_collocation else 'non-collocated' if raw_multi_journal or dmcrypt_dedicated_journal else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1
+#valid_osd_scenarios:
+# - collocated
+# - non-collocated
+# - lvm
+osd_scenario: collocated
+
+# II. Second scenario: non-collocated
+#
+# To enable this scenario do: osd_scenario: non-collocated
+#
+# If osd_objectstore: filestore is enabled 'ceph data' and 'ceph journal' partitions
+# will be stored on different devices:
+# - 'ceph data' will be stored on the device listed in 'devices'
+# - 'ceph journal' will be stored on the device listed in 'dedicated_devices'
+#
+# Let's take an example, imagine 'devices' was declared like this:
+#
+# devices:
+# - /dev/sda
+# - /dev/sdb
+# - /dev/sdc
+# - /dev/sdd
+#
+# And 'dedicated_devices' was declared like this:
+#
+# dedicated_devices:
+# - /dev/sdf
+# - /dev/sdf
+# - /dev/sdg
+# - /dev/sdg
+#
+# This will result in the following mapping:
+# - /dev/sda will have /dev/sdf1 as journal
+# - /dev/sdb will have /dev/sdf2 as a journal
+# - /dev/sdc will have /dev/sdg1 as a journal
+# - /dev/sdd will have /dev/sdg2 as a journal
+#
+#
+# If osd_objectstore: bluestore is enabled, both 'ceph block.db' and 'ceph block.wal' partitions will be stored
+# on a dedicated device.
+#
+# So the following will happen:
+# - The devices listed in 'devices' will get 2 partitions, one for 'block' and one for 'data'.
+# 'data' is only 100MB big and do not store any of your data, it's just a bunch of Ceph metadata.
+# 'block' will store all your actual data.
+# - The devices in 'dedicated_devices' will get 1 partition for RocksDB DB, called 'block.db'
+# and one for RocksDB WAL, called 'block.wal'
+#
+# By default dedicated_devices will represent block.db
+#
+# Example of what you will get:
+# [root@ceph-osd0 ~]# blkid /dev/sd*
+# /dev/sda: PTTYPE="gpt"
+# /dev/sda1: UUID="c6821801-2f21-4980-add0-b7fc8bd424d5" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="f2cc6fa8-5b41-4428-8d3f-6187453464d0"
+# /dev/sda2: PARTLABEL="ceph block" PARTUUID="ea454807-983a-4cf2-899e-b2680643bc1c"
+# /dev/sdb: PTTYPE="gpt"
+# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="af5b2d74-4c08-42cf-be57-7248c739e217"
+# /dev/sdb2: PARTLABEL="ceph block.wal" PARTUUID="af3f8327-9aa9-4c2b-a497-cf0fe96d126a"
+#dedicated_devices: []
+
+
+# More device granularity for Bluestore
+#
+# ONLY if osd_objectstore: bluestore is enabled.
+#
+# By default, if 'bluestore_wal_devices' is empty, it will get the content of 'dedicated_devices'.
+# If set, then you will have a dedicated partition on a specific device for block.wal.
+#
+# Example of what you will get:
+# [root@ceph-osd0 ~]# blkid /dev/sd*
+# /dev/sda: PTTYPE="gpt"
+# /dev/sda1: UUID="39241ae9-d119-4335-96b3-0898da8f45ce" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="961e7313-bdb7-49e7-9ae7-077d65c4c669"
+# /dev/sda2: PARTLABEL="ceph block" PARTUUID="bff8e54e-b780-4ece-aa16-3b2f2b8eb699"
+# /dev/sdb: PTTYPE="gpt"
+# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="0734f6b6-cc94-49e9-93de-ba7e1d5b79e3"
+# /dev/sdc: PTTYPE="gpt"
+# /dev/sdc1: PARTLABEL="ceph block.wal" PARTUUID="824b84ba-6777-4272-bbbd-bfe2a25cecf3"
+#bluestore_wal_devices: "{{ dedicated_devices }}"
+
+# III. Use ceph-volume to create OSDs from logical volumes.
+# Use 'osd_scenario: lvm' to enable this scenario. Currently we only support dedicated journals
+# when using lvm, not collocated journals.
+# lvm_volumes is a list of dictionaries. Each dictionary must contain a data, journal and vg_name
+# key. Any logical volume or logical group used must be a name and not a path.
+# data must be a logical volume
+# journal can be either a lv, device or partition. You can not use the same journal for many data lvs.
+# data_vg must be the volume group name of the data lv
+# journal_vg is optional and must be the volume group name of the journal lv, if applicable
+# For example:
+# lvm_volumes:
+# - data: data-lv1
+# data_vg: vg1
+# journal: journal-lv1
+# journal_vg: vg2
+# - data: data-lv2
+# journal: /dev/sda
+# data_vg: vg1
+# - data: data-lv3
+# journal: /dev/sdb1
+# data_vg: vg2
+#lvm_volumes: []
+
+
+##########
+# DOCKER #
+##########
+
+#ceph_config_keys: [] # DON'T TOUCH ME
+
+# Resource limitation
+# For the whole list of limits you can apply see: docs.docker.com/engine/admin/resource_constraints
+# Default values are based from: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html/red_hat_ceph_storage_hardware_guide/minimum_recommendations
+# These options can be passed using the 'ceph_osd_docker_extra_env' variable.
+#ceph_osd_docker_memory_limit: 1g
+#ceph_osd_docker_cpu_limit: 1
+
+# PREPARE DEVICE
+#
+# WARNING /!\ DMCRYPT scenario ONLY works with Docker version 1.12.5 and above
+#
+#ceph_osd_docker_devices: "{{ devices }}"
+#ceph_osd_docker_prepare_env: -e OSD_JOURNAL_SIZE={{ journal_size }}
+
+# ACTIVATE DEVICE
+#
+#ceph_osd_docker_extra_env:
+#ceph_osd_docker_run_script_path: "/usr/share" # script called by systemd to run the docker command
+
+
+###########
+# SYSTEMD #
+###########
+
+# ceph_osd_systemd_overrides will override the systemd settings
+# for the ceph-osd services.
+# For example,to set "PrivateDevices=false" you can specify:
+#ceph_osd_systemd_overrides:
+# Service:
+# PrivateDevices: False
+
-authOptions:\r
- noAuth: true\r
- endpoint: "http://127.0.0.1/identity"\r
- cinderEndpoint: "http://127.0.0.1:8776/v2"\r
- domainId: "Default"\r
- domainName: "Default"\r
- username: ""\r
- password: ""\r
- tenantId: "myproject"\r
- tenantName: "myproject"\r
-pool:\r
- "cinder-lvm@lvm#lvm":\r
- AZ: nova\r
- thin: true\r
+authOptions:
+ noAuth: true
+ endpoint: "http://127.0.0.1/identity"
+ cinderEndpoint: "http://127.0.0.1:8776/v2"
+ domainId: "Default"
+ domainName: "Default"
+ username: ""
+ password: ""
+ tenantId: "myproject"
+ tenantName: "myproject"
+pool:
+ "cinder-lvm@lvm#lvm":
+ AZ: nova
+ thin: true
----\r
-# Variables here are applicable to all host groups NOT roles\r
-\r
-# This sample file generated by generate_group_vars_sample.sh\r
-\r
-# Dummy variable to avoid error because ansible does not recognize the\r
-# file as a good configuration file when no variable in it.\r
-dummy:\r
-\r
-# You can override default vars defined in defaults/main.yml here,\r
-# but I would advice to use host or group vars instead\r
-\r
-\r
-###########\r
-# GENERAL #\r
-###########\r
-\r
-workplace: /home/krej # Change this field according to your username, use '/root' if you login as root.\r
-\r
-# These fields are NOT suggested to be modified\r
-remote_url: https://github.com/opensds/opensds.git\r
-opensds_root_dir: "{{ workplace }}/gopath/src/github.com/opensds/opensds"\r
-opensds_build_dir: "{{ opensds_root_dir }}/build"\r
-opensds_config_dir: /etc/opensds\r
-opensds_log_dir: /var/log/opensds\r
-\r
-###########\r
-# GOLANG #\r
-###########\r
-\r
-golang_release: 1.9.2\r
-\r
-# These fields are NOT suggested to be modified\r
-golang_tarball: go{{ golang_release }}.linux-amd64.tar.gz\r
-golang_download_url: https://storage.googleapis.com/golang/{{ golang_tarball }}\r
+---
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+
+###########
+# GENERAL #
+###########
+
+workplace: /home/krej # Change this field according to your username, use '/root' if you login as root.
+
+# These fields are NOT suggested to be modified
+remote_url: https://github.com/opensds/opensds.git
+opensds_root_dir: "{{ workplace }}/gopath/src/github.com/opensds/opensds"
+opensds_build_dir: "{{ opensds_root_dir }}/build"
+opensds_config_dir: /etc/opensds
+opensds_log_dir: /var/log/opensds
+
+###########
+# GOLANG #
+###########
+
+golang_release: 1.9.2
+
+# These fields are NOT suggested to be modified
+golang_tarball: go{{ golang_release }}.linux-amd64.tar.gz
+golang_download_url: https://storage.googleapis.com/golang/{{ golang_tarball }}
+
+###########
+#CONTAINER#
+###########
+
+container_enabled: false
-tgtBindIp: 127.0.0.1\r
-pool:\r
- "vg001": # change pool name same to vg_name, but don't change it if you choose ceph backend\r
- diskType: SSD\r
+tgtBindIp: 127.0.0.1
+pool:
+ "vg001": # change pool name same to vg_name, but don't change it if you choose ceph backend
+ diskType: SSD
AZ: default
\ No newline at end of file
----\r
-# Variables here are applicable to all host groups NOT roles\r
-\r
-# This sample file generated by generate_group_vars_sample.sh\r
-\r
-# Dummy variable to avoid error because ansible does not recognize the\r
-# file as a good configuration file when no variable in it.\r
-dummy:\r
-\r
-# You can override default vars defined in defaults/main.yml here,\r
-# but I would advice to use host or group vars instead\r
-\r
-\r
-###########\r
-# GENERAL #\r
-###########\r
-\r
-db_driver: etcd\r
-db_endpoint: localhost:2379,localhost:2380\r
-#db_credential: opensds:password@127.0.0.1:3306/dbname\r
-\r
-###########\r
-# ETCD #\r
-###########\r
-\r
-etcd_release: v3.2.0\r
-\r
-# These fields are not suggested to be modified\r
-etcd_tarball: etcd-{{ etcd_release }}-linux-amd64.tar.gz\r
-etcd_download_url: https://github.com/coreos/etcd/releases/download/{{ etcd_release }}/{{ etcd_tarball }}\r
-etcd_dir: /opt/etcd-{{ etcd_release }}-linux-amd64\r
+---
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+
+###########
+# GENERAL #
+###########
+
+db_driver: etcd
+db_endpoint: localhost:2379,localhost:2380
+#db_credential: opensds:password@127.0.0.1:3306/dbname
+
+###########
+# ETCD #
+###########
+
+etcd_release: v3.2.0
+etcd_host: 127.0.0.1
+etcd_port: 2379
+etcd_peer_port: 2380
+
+# These fields are not suggested to be modified
+etcd_tarball: etcd-{{ etcd_release }}-linux-amd64.tar.gz
+etcd_download_url: https://github.com/coreos/etcd/releases/download/{{ etcd_release }}/{{ etcd_tarball }}
+etcd_dir: /opt/etcd-{{ etcd_release }}-linux-amd64
+
+###########
+# DOCKER #
+###########
+
+etcd_docker_image: quay.io/coreos/etcd:latest
----\r
-# Variables here are applicable to all host groups NOT roles\r
-\r
-# This sample file generated by generate_group_vars_sample.sh\r
-\r
-# Dummy variable to avoid error because ansible does not recognize the\r
-# file as a good configuration file when no variable in it.\r
-dummy:\r
-\r
-# You can override default vars defined in defaults/main.yml here,\r
-# but I would advice to use host or group vars instead\r
-\r
-\r
-###########\r
-# GENERAL #\r
-###########\r
-\r
-# Change it according to your backend, currently support 'lvm', 'ceph', 'cinder'\r
-enabled_backend: lvm\r
-\r
-# These fields are NOT suggested to be modified\r
-dock_endpoint: localhost:50050\r
-dock_log_file: "{{ opensds_log_dir }}/osdsdock.log"\r
-\r
-###########\r
-# LVM #\r
-###########\r
-\r
-pv_device: /dev/sdb # Specify a block device and ensure it existed if you choose lvm\r
-vg_name: vg001 # Specify a name randomly\r
-\r
-# These fields are NOT suggested to be modified\r
-lvm_name: lvm backend\r
-lvm_description: This is a lvm backend service\r
-lvm_driver_name: lvm\r
-lvm_config_path: "{{ opensds_config_dir }}/driver/lvm.yaml"\r
-\r
-###########\r
-# CEPH #\r
-###########\r
-\r
-ceph_pool_name: rbd # Specify a name randomly\r
-\r
-# These fields are NOT suggested to be modified\r
-ceph_name: ceph backend\r
-ceph_description: This is a ceph backend service\r
-ceph_driver_name: ceph\r
-ceph_config_path: "{{ opensds_config_dir }}/driver/ceph.yaml"\r
-\r
-###########\r
-# CINDER #\r
-###########\r
-\r
-# Use block-box install cinder_standalone if true, see details in:\r
-# https://github.com/openstack/cinder/tree/master/contrib/block-box\r
-use_cinder_standalone: true\r
-# If true, you can configure cinder_container_platform, cinder_image_tag,\r
-# cinder_volume_group.\r
-\r
-# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported.\r
-cinder_container_platform: debian:stretch\r
-# The image tag can be arbitrarily modified, as long as follow the image naming\r
-# conventions, default: debian-cinder\r
-cinder_image_tag: debian-cinder\r
-# The cinder standalone use lvm driver as default driver, therefore `volume_group`\r
-# should be configured, the default is: cinder-volumes. The volume group will be\r
-# removed when use ansible script clean environment.\r
-cinder_volume_group: cinder-volumes\r
-# All source code and volume group file will be placed in the cinder_data_dir:\r
-cinder_data_dir: "{{ workplace }}/cinder_data_dir"\r
-\r
-\r
-# These fields are not suggested to be modified\r
-cinder_name: cinder backend\r
-cinder_description: This is a cinder backend service\r
-cinder_driver_name: cinder\r
-cinder_config_path: "{{ opensds_config_dir }}/driver/cinder.yaml"\r
-\r
-###########\r
-# DOCKER #\r
-###########\r
-\r
-dock_docker_image: dockerio/opensds-dock:zealand\r
+---
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+
+###########
+# GENERAL #
+###########
+
+# Change it according to your backend, currently support 'lvm', 'ceph', 'cinder'
+enabled_backend: lvm
+
+# These fields are NOT suggested to be modified
+dock_endpoint: localhost:50050
+dock_log_file: "{{ opensds_log_dir }}/osdsdock.log"
+
+###########
+# LVM #
+###########
+
+pv_device: /dev/sdc # Specify a block device and ensure it existed if you choose lvm
+vg_name: vg001 # Specify a name randomly
+
+# These fields are NOT suggested to be modified
+lvm_name: lvm backend
+lvm_description: This is a lvm backend service
+lvm_driver_name: lvm
+lvm_config_path: "{{ opensds_config_dir }}/driver/lvm.yaml"
+
+###########
+# CEPH #
+###########
+
+ceph_pool_name: rbd # Specify a name randomly
+
+# These fields are NOT suggested to be modified
+ceph_name: ceph backend
+ceph_description: This is a ceph backend service
+ceph_driver_name: ceph
+ceph_config_path: "{{ opensds_config_dir }}/driver/ceph.yaml"
+
+###########
+# CINDER #
+###########
+
+# Use block-box install cinder_standalone if true, see details in:
+# https://github.com/openstack/cinder/tree/master/contrib/block-box
+use_cinder_standalone: true
+# If true, you can configure cinder_container_platform, cinder_image_tag,
+# cinder_volume_group.
+
+# Default: debian:stretch, and ubuntu:xenial, centos:7 is also supported.
+cinder_container_platform: debian:stretch
+# The image tag can be arbitrarily modified, as long as follow the image naming
+# conventions, default: debian-cinder
+cinder_image_tag: debian-cinder
+# The cinder standalone use lvm driver as default driver, therefore `volume_group`
+# should be configured, the default is: cinder-volumes. The volume group will be
+# removed when use ansible script clean environment.
+cinder_volume_group: cinder-volumes
+# All source code and volume group file will be placed in the cinder_data_dir:
+cinder_data_dir: "{{ workplace }}/cinder_data_dir"
+
+
+# These fields are not suggested to be modified
+cinder_name: cinder backend
+cinder_description: This is a cinder backend service
+cinder_driver_name: cinder
+cinder_config_path: "{{ opensds_config_dir }}/driver/cinder.yaml"
+
+###########
+# DOCKER #
+###########
+
+dock_docker_image: opensdsio/opensds-dock:latest
----\r
-# Variables here are applicable to all host groups NOT roles\r
-\r
-# This sample file generated by generate_group_vars_sample.sh\r
-\r
-# Dummy variable to avoid error because ansible does not recognize the\r
-# file as a good configuration file when no variable in it.\r
-dummy:\r
-\r
-# You can override default vars defined in defaults/main.yml here,\r
-# but I would advice to use host or group vars instead\r
-\r
-\r
-###########\r
-# GENERAL #\r
-###########\r
-\r
-# These fields are NOT suggested to be modified\r
-controller_endpoint: localhost:50040\r
-controller_log_file: "{{ opensds_log_dir }}/osdslet.log"\r
-\r
-###########\r
-# DOCKER #\r
-###########\r
-\r
-controller_docker_image: dockerio/opensds-controller:zealand\r
+---
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+
+###########
+# GENERAL #
+###########
+
+# These fields are NOT suggested to be modified
+controller_endpoint: 0.0.0.0:50040
+controller_log_file: "{{ opensds_log_dir }}/osdslet.log"
+
+###########
+# DOCKER #
+###########
+
+controller_docker_image: opensdsio/opensds-controller:latest
-[controllers]\r
-localhost ansible_connection=local\r
-\r
-[docks]\r
-localhost ansible_connection=local\r
+[controllers]
+localhost ansible_connection=local
+
+[docks]
+localhost ansible_connection=local
----\r
-- name: remove golang tarball\r
- file:\r
- path: "/opt/{{ golang_tarball }}"\r
- state: absent\r
- force: yes\r
- ignore_errors: yes\r
-\r
-- name: kill etcd daemon service\r
- shell: killall etcd\r
- ignore_errors: yes\r
- when: db_driver == "etcd"\r
-\r
-- name: remove etcd service data\r
- file:\r
- path: "{{ etcd_dir }}"\r
- state: absent\r
- force: yes\r
- ignore_errors: yes\r
- when: db_driver == "etcd"\r
-\r
-- name: remove etcd tarball\r
- file:\r
- path: "/opt/{{ etcd_tarball }}"\r
- state: absent\r
- force: yes\r
- ignore_errors: yes\r
- when: db_driver == "etcd"\r
-\r
-- name: kill osdslet daemon service\r
- shell: killall osdslet\r
- ignore_errors: yes\r
-\r
-- name: kill osdsdock daemon service\r
- shell: killall osdsdock\r
- ignore_errors: yes\r
-\r
-- name: clean all opensds build files\r
- shell: . /etc/profile; make clean\r
- args:\r
- chdir: "{{ opensds_root_dir }}"\r
-\r
-- name: clean all opensds configuration files\r
- file:\r
- path: "{{ opensds_config_dir }}"\r
- state: absent\r
- force: yes\r
- ignore_errors: yes\r
-\r
-- name: clean all opensds log files\r
- file:\r
- path: "{{ opensds_log_dir }}"\r
- state: absent\r
- force: yes\r
- ignore_errors: yes\r
-\r
-- name: check if it existed before cleaning a volume group\r
- shell: vgdisplay {{ vg_name }}\r
- ignore_errors: yes\r
- register: vg_existed\r
- when: enabled_backend == "lvm"\r
-\r
-- name: remove a volume group if lvm backend specified\r
- shell: vgremove {{ vg_name }}\r
- when: enabled_backend == "lvm" and vg_existed.rc == 0\r
-\r
-- name: check if it existed before cleaning a physical volume\r
- shell: pvdisplay {{ pv_device }}\r
- ignore_errors: yes\r
- register: pv_existed\r
- when: enabled_backend == "lvm"\r
-\r
-- name: remove a physical volume if lvm backend specified\r
- shell: pvremove {{ pv_device }}\r
- when: enabled_backend == "lvm" and pv_existed.rc == 0\r
-\r
-- name: stop cinder-standalone service\r
- shell: docker-compose down\r
- become: true\r
- args:\r
- chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"\r
- when: enabled_backend == "cinder"\r
-\r
-- name: clean the volume group of cinder\r
- shell:\r
- _raw_params: |\r
-\r
- # _clean_lvm_volume_group removes all default LVM volumes\r
- #\r
- # Usage: _clean_lvm_volume_group $vg\r
- function _clean_lvm_volume_group {\r
- local vg=$1\r
-\r
- # Clean out existing volumes\r
- sudo lvremove -f $vg\r
- }\r
-\r
- # _remove_lvm_volume_group removes the volume group\r
- #\r
- # Usage: _remove_lvm_volume_group $vg\r
- function _remove_lvm_volume_group {\r
- local vg=$1\r
-\r
- # Remove the volume group\r
- sudo vgremove -f $vg\r
- }\r
-\r
- # _clean_lvm_backing_file() removes the backing file of the\r
- # volume group\r
- #\r
- # Usage: _clean_lvm_backing_file() $backing_file\r
- function _clean_lvm_backing_file {\r
- local backing_file=$1\r
-\r
- # If the backing physical device is a loop device, it was probably setup by DevStack\r
- if [[ -n "$backing_file" ]] && [[ -e "$backing_file" ]]; then\r
- local vg_dev\r
- vg_dev=$(sudo losetup -j $backing_file | awk -F':' '/'.img'/ { print $1}')\r
- if [[ -n "$vg_dev" ]]; then\r
- sudo losetup -d $vg_dev\r
- fi\r
- rm -f $backing_file\r
- fi\r
- }\r
-\r
- # clean_lvm_volume_group() cleans up the volume group and removes the\r
- # backing file\r
- #\r
- # Usage: clean_lvm_volume_group $vg\r
- function clean_lvm_volume_group {\r
- local vg=$1\r
-\r
- _clean_lvm_volume_group $vg\r
- _remove_lvm_volume_group $vg\r
- # if there is no logical volume left, it's safe to attempt a cleanup\r
- # of the backing file\r
- if [[ -z "$(sudo lvs --noheadings -o lv_name $vg 2>/dev/null)" ]]; then\r
- _clean_lvm_backing_file {{ cinder_data_dir }}/${vg}.img\r
- fi\r
- }\r
-\r
- clean_lvm_volume_group {{cinder_volume_group}}\r
-\r
- args:\r
- executable: /bin/bash\r
- become: true\r
- when: enabled_backend == "cinder"\r
+---
+- name: remove golang tarball
+ file:
+ path: "/opt/{{ golang_tarball }}"
+ state: absent
+ force: yes
+ ignore_errors: yes
+
+- name: kill etcd daemon service
+ shell: killall etcd
+ ignore_errors: yes
+ when: db_driver == "etcd" and container_enabled == false
+
+- name: kill etcd containerized service
+ docker:
+ image: quay.io/coreos/etcd:latest
+ state: stopped
+ when: container_enabled == true
+
+- name: remove etcd service data
+ file:
+ path: "{{ etcd_dir }}"
+ state: absent
+ force: yes
+ ignore_errors: yes
+ when: db_driver == "etcd"
+
+- name: remove etcd tarball
+ file:
+ path: "/opt/{{ etcd_tarball }}"
+ state: absent
+ force: yes
+ ignore_errors: yes
+ when: db_driver == "etcd"
+
+- name: kill osdslet daemon service
+ shell: killall osdslet
+ ignore_errors: yes
+ when: container_enabled == false
+
+- name: kill osdslet containerized service
+ docker:
+ image: opensdsio/opensds-controller:latest
+ state: stopped
+ when: container_enabled == true
+
+- name: kill osdsdock daemon service
+ shell: killall osdsdock
+ ignore_errors: yes
+ when: container_enabled == false
+
+- name: kill osdsdock containerized service
+ docker:
+ image: opensdsio/opensds-dock:latest
+ state: stopped
+ when: container_enabled == true
+
+- name: clean all opensds build files
+ shell: . /etc/profile; make clean
+ args:
+ chdir: "{{ opensds_root_dir }}"
+
+- name: clean all opensds configuration files
+ file:
+ path: "{{ opensds_config_dir }}"
+ state: absent
+ force: yes
+ ignore_errors: yes
+
+- name: clean all opensds log files
+ file:
+ path: "{{ opensds_log_dir }}"
+ state: absent
+ force: yes
+ ignore_errors: yes
+
+- name: check if it existed before cleaning a volume group
+ shell: vgdisplay {{ vg_name }}
+ ignore_errors: yes
+ register: vg_existed
+ when: enabled_backend == "lvm"
+
+- name: remove a volume group if lvm backend specified
+ shell: vgremove {{ vg_name }}
+ when: enabled_backend == "lvm" and vg_existed.rc == 0
+
+- name: check if it existed before cleaning a physical volume
+ shell: pvdisplay {{ pv_device }}
+ ignore_errors: yes
+ register: pv_existed
+ when: enabled_backend == "lvm"
+
+- name: remove a physical volume if lvm backend specified
+ shell: pvremove {{ pv_device }}
+ when: enabled_backend == "lvm" and pv_existed.rc == 0
+
+- name: stop cinder-standalone service
+ shell: docker-compose down
+ become: true
+ args:
+ chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"
+ when: enabled_backend == "cinder"
+
+- name: clean the volume group of cinder
+ shell:
+ _raw_params: |
+
+ # _clean_lvm_volume_group removes all default LVM volumes
+ #
+ # Usage: _clean_lvm_volume_group $vg
+ function _clean_lvm_volume_group {
+ local vg=$1
+
+ # Clean out existing volumes
+ sudo lvremove -f $vg
+ }
+
+ # _remove_lvm_volume_group removes the volume group
+ #
+ # Usage: _remove_lvm_volume_group $vg
+ function _remove_lvm_volume_group {
+ local vg=$1
+
+ # Remove the volume group
+ sudo vgremove -f $vg
+ }
+
+ # _clean_lvm_backing_file() removes the backing file of the
+ # volume group
+ #
+ # Usage: _clean_lvm_backing_file() $backing_file
+ function _clean_lvm_backing_file {
+ local backing_file=$1
+
+ # If the backing physical device is a loop device, it was probably setup by DevStack
+ if [[ -n "$backing_file" ]] && [[ -e "$backing_file" ]]; then
+ local vg_dev
+ vg_dev=$(sudo losetup -j $backing_file | awk -F':' '/'.img'/ { print $1}')
+ if [[ -n "$vg_dev" ]]; then
+ sudo losetup -d $vg_dev
+ fi
+ rm -f $backing_file
+ fi
+ }
+
+ # clean_lvm_volume_group() cleans up the volume group and removes the
+ # backing file
+ #
+ # Usage: clean_lvm_volume_group $vg
+ function clean_lvm_volume_group {
+ local vg=$1
+
+ _clean_lvm_volume_group $vg
+ _remove_lvm_volume_group $vg
+ # if there is no logical volume left, it's safe to attempt a cleanup
+ # of the backing file
+ if [[ -z "$(sudo lvs --noheadings -o lv_name $vg 2>/dev/null)" ]]; then
+ _clean_lvm_backing_file {{ cinder_data_dir }}/${vg}.img
+ fi
+ }
+
+ clean_lvm_volume_group {{cinder_volume_group}}
+
+ args:
+ executable: /bin/bash
+ become: true
+ when: enabled_backend == "cinder"
----\r
-# If we can't get golang installed before any module is used we will fail\r
-# so just try what we can to get it installed\r
-- name: check for golang\r
- stat:\r
- path: /usr/local/go\r
- ignore_errors: yes\r
- register: systemgolang\r
-\r
-- name: install golang for debian based systems\r
- shell:\r
- cmd: |\r
- set -e\r
- set -x\r
-\r
- wget {{ golang_download_url }} -P /opt/\r
- tar xvf /opt/{{ golang_tarball }} -C /usr/local/\r
- cat >> /etc/profile <<GOLANG__CONFIG_DOC\r
- export GOROOT=/usr/local/go\r
- export GOPATH=\$HOME/gopath\r
- export PATH=\$PATH:\$GOROOT/bin:\$GOPATH/bin\r
- GOLANG__CONFIG_DOC\r
-\r
- executable: /bin/bash\r
- ignore_errors: yes\r
- when:\r
- - systemgolang.stat.exists is undefined or systemgolang.stat.exists == false\r
-\r
-- name: Run the equivalent of "apt-get update" as a separate step\r
- apt:\r
- update_cache: yes\r
-\r
-- name: install librados-dev external package\r
- apt:\r
- name: librados-dev\r
-\r
-- name: install librbd-dev external package\r
- apt:\r
- name: librbd-dev\r
-\r
-- name: check for opensds source code existed\r
- stat:\r
- path: "{{ opensds_root_dir }}"\r
- ignore_errors: yes\r
- register: opensdsexisted\r
-\r
-- name: download opensds source code\r
- git:\r
- repo: "{{ remote_url }}"\r
- dest: "{{ opensds_root_dir }}"\r
- when:\r
- - opensdsexisted.stat.exists is undefined or opensdsexisted.stat.exists == false\r
-\r
-- name: check for opensds binary file existed\r
- stat:\r
- path: "{{ opensds_build_dir }}"\r
- ignore_errors: yes\r
- register: opensdsbuilt\r
-\r
-- name: build opensds binary file\r
- shell: . /etc/profile; make\r
- args:\r
- chdir: "{{ opensds_root_dir }}"\r
- when:\r
- - opensdsbuilt.stat.exists is undefined or opensdsbuilt.stat.exists == false\r
-\r
-- name: create opensds global config directory if it doesn't exist\r
- file:\r
- path: "{{ opensds_config_dir }}/driver"\r
- state: directory\r
- mode: 0755\r
-\r
-- name: create opensds log directory if it doesn't exist\r
- file:\r
- path: "{{ opensds_log_dir }}"\r
- state: directory\r
- mode: 0755\r
-\r
-- name: configure opensds global info\r
- shell: |\r
- cat > opensds.conf <<OPENSDS_GLOABL_CONFIG_DOC\r
- [osdslet]\r
- api_endpoint = {{ controller_endpoint }}\r
- graceful = True\r
- log_file = {{ controller_log_file }}\r
- socket_order = inc\r
-\r
- [osdsdock]\r
- api_endpoint = {{ dock_endpoint }}\r
- log_file = {{ dock_log_file }}\r
- # Specify which backends should be enabled, sample,ceph,cinder,lvm and so on.\r
- enabled_backends = {{ enabled_backend }}\r
-\r
- [lvm]\r
- name = {{ lvm_name }}\r
- description = {{ lvm_description }}\r
- driver_name = {{ lvm_driver_name }}\r
- config_path = {{ lvm_config_path }}\r
-\r
- [ceph]\r
- name = {{ ceph_name }}\r
- description = {{ ceph_description }}\r
- driver_name = {{ ceph_driver_name }}\r
- config_path = {{ ceph_config_path }}\r
-\r
- [cinder]\r
- name = {{ cinder_name }}\r
- description = {{ cinder_description }}\r
- driver_name = {{ cinder_driver_name }}\r
- config_path = {{ cinder_config_path }}\r
-\r
- [database]\r
- endpoint = {{ db_endpoint }}\r
- driver = {{ db_driver }}\r
- args:\r
- chdir: "{{ opensds_config_dir }}"\r
- ignore_errors: yes\r
-\r
-- name: copy opensds lvm backend file if specify lvm backend\r
- copy:\r
- src: ../../../group_vars/lvm/lvm.yaml\r
- dest: "{{ lvm_config_path }}"\r
- when: enabled_backend == "lvm"\r
-\r
-- name: copy opensds ceph backend file if specify ceph backend\r
- copy:\r
- src: ../../../group_vars/ceph/ceph.yaml\r
- dest: "{{ ceph_config_path }}"\r
- when: enabled_backend == "ceph"\r
-\r
-- name: copy opensds cinder backend file if specify cinder backend\r
- copy:\r
- src: ../../../group_vars/cinder/cinder.yaml\r
- dest: "{{ cinder_config_path }}"\r
- when: enabled_backend == "cinder"\r
+---
+# If we can't get golang installed before any module is used we will fail
+# so just try what we can to get it installed
+- name: check for golang
+ stat:
+ path: /usr/local/go
+ ignore_errors: yes
+ register: systemgolang
+
+- name: install golang for debian based systems
+ shell:
+ cmd: |
+ set -e
+ set -x
+
+ wget {{ golang_download_url }} -P /opt/
+ tar xvf /opt/{{ golang_tarball }} -C /usr/local/
+ cat >> /etc/profile <<GOLANG__CONFIG_DOC
+ export GOROOT=/usr/local/go
+ export GOPATH=\$HOME/gopath
+ export PATH=\$PATH:\$GOROOT/bin:\$GOPATH/bin
+ GOLANG__CONFIG_DOC
+
+ executable: /bin/bash
+ ignore_errors: yes
+ when:
+ - systemgolang.stat.exists is undefined or systemgolang.stat.exists == false
+
+- name: Run the equivalent of "apt-get update" as a separate step
+ apt:
+ update_cache: yes
+
+- name: install librados-dev external package
+ apt:
+ name: librados-dev
+
+- name: install librbd-dev external package
+ apt:
+ name: librbd-dev
+
+- pip:
+ name: docker-py
+ when: container_enabled == true
+
+- name: check for opensds source code existed
+ stat:
+ path: "{{ opensds_root_dir }}"
+ ignore_errors: yes
+ register: opensdsexisted
+
+- name: download opensds source code
+ git:
+ repo: "{{ remote_url }}"
+ dest: "{{ opensds_root_dir }}"
+ when:
+ - opensdsexisted.stat.exists is undefined or opensdsexisted.stat.exists == false
+
+- name: check for opensds binary file existed
+ stat:
+ path: "{{ opensds_build_dir }}"
+ ignore_errors: yes
+ register: opensdsbuilt
+
+- name: build opensds binary file
+ shell: . /etc/profile; make
+ args:
+ chdir: "{{ opensds_root_dir }}"
+ when:
+ - opensdsbuilt.stat.exists is undefined or opensdsbuilt.stat.exists == false
+
+- name: create opensds global config directory if it doesn't exist
+ file:
+ path: "{{ opensds_config_dir }}/driver"
+ state: directory
+ mode: 0755
+
+- name: create opensds log directory if it doesn't exist
+ file:
+ path: "{{ opensds_log_dir }}"
+ state: directory
+ mode: 0755
+
+- name: configure opensds global info
+ shell: |
+ cat > opensds.conf <<OPENSDS_GLOABL_CONFIG_DOC
+ [osdslet]
+ api_endpoint = {{ controller_endpoint }}
+ graceful = True
+ log_file = {{ controller_log_file }}
+ socket_order = inc
+
+ [osdsdock]
+ api_endpoint = {{ dock_endpoint }}
+ log_file = {{ dock_log_file }}
+ # Specify which backends should be enabled, sample,ceph,cinder,lvm and so on.
+ enabled_backends = {{ enabled_backend }}
+
+ [lvm]
+ name = {{ lvm_name }}
+ description = {{ lvm_description }}
+ driver_name = {{ lvm_driver_name }}
+ config_path = {{ lvm_config_path }}
+
+ [ceph]
+ name = {{ ceph_name }}
+ description = {{ ceph_description }}
+ driver_name = {{ ceph_driver_name }}
+ config_path = {{ ceph_config_path }}
+
+ [cinder]
+ name = {{ cinder_name }}
+ description = {{ cinder_description }}
+ driver_name = {{ cinder_driver_name }}
+ config_path = {{ cinder_config_path }}
+
+ [database]
+ endpoint = {{ db_endpoint }}
+ driver = {{ db_driver }}
+ args:
+ chdir: "{{ opensds_config_dir }}"
+ ignore_errors: yes
--- /dev/null
+---
+- name: run etcd containerized service
+ docker:
+ name: myetcd
+ image: quay.io/coreos/etcd:latest
+ command: /usr/local/bin/etcd --advertise-client-urls http://{{ etcd_host }}:{{ etcd_port }} --listen-client-urls http://{{ etcd_host }}:{{ etcd_port }} -advertise-client-urls http://{{ etcd_host }}:{{ etcd_peer_port }} -listen-peer-urls http://{{ etcd_host }}:{{ etcd_peer_port }}
+ state: started
+ net: host
+ volumes:
+ - "/usr/share/ca-certificates/:/etc/ssl/certs"
----\r
-- name: check for etcd existed\r
- stat:\r
- path: "{{ etcd_dir }}/etcd"\r
- ignore_errors: yes\r
- register: etcdexisted\r
-\r
-- name: download etcd\r
- get_url:\r
- url={{ etcd_download_url }}\r
- dest=/opt/{{ etcd_tarball }}\r
- when:\r
- - etcdexisted.stat.exists is undefined or etcdexisted.stat.exists == false\r
-\r
-- name: extract the etcd tarball\r
- unarchive:\r
- src=/opt/{{ etcd_tarball }}\r
- dest=/opt/\r
- when:\r
- - etcdexisted.stat.exists is undefined or etcdexisted.stat.exists == false\r
-\r
-- name: Check if etcd is running\r
- shell: ps aux | grep etcd | grep -v grep\r
- ignore_errors: true\r
- register: service_etcd_status\r
-\r
-- name: run etcd daemon service\r
- shell: nohup ./etcd &>>etcd.log &\r
- become: true\r
- args:\r
- chdir: "{{ etcd_dir }}"\r
- when: service_etcd_status.rc != 0\r
-\r
-- name: check etcd cluster health\r
- shell: ./etcdctl cluster-health\r
- become: true\r
- args:\r
- chdir: "{{ etcd_dir }}"\r
+---
+- name: check for etcd existed
+ stat:
+ path: "{{ etcd_dir }}/etcd"
+ ignore_errors: yes
+ register: etcdexisted
+
+- name: download etcd
+ get_url:
+ url={{ etcd_download_url }}
+ dest=/opt/{{ etcd_tarball }}
+ when:
+ - etcdexisted.stat.exists is undefined or etcdexisted.stat.exists == false
+
+- name: extract the etcd tarball
+ unarchive:
+ src=/opt/{{ etcd_tarball }}
+ dest=/opt/
+ when:
+ - etcdexisted.stat.exists is undefined or etcdexisted.stat.exists == false
+
+- name: Check if etcd is running
+ shell: ps aux | grep etcd | grep -v grep
+ ignore_errors: true
+ register: service_etcd_status
+
+- name: run etcd daemon service
+ shell: nohup ./etcd --advertise-client-urls http://{{ etcd_host }}:{{ etcd_port }} --listen-client-urls http://{{ etcd_host }}:{{ etcd_port }} -advertise-client-urls http://{{ etcd_host }}:{{ etcd_peer_port }} -listen-peer-urls http://{{ etcd_host }}:{{ etcd_peer_port }} &>>etcd.log &
+ become: true
+ args:
+ chdir: "{{ etcd_dir }}"
+ when: service_etcd_status.rc != 0
+
+- name: check etcd cluster health
+ shell: ./etcdctl cluster-health
+ become: true
+ ignore_errors: true
+ args:
+ chdir: "{{ etcd_dir }}"
----\r
-- name: include scenarios/etcd.yml\r
- include: scenarios/etcd.yml\r
- when: db_driver == "etcd"
\ No newline at end of file
+---
+- name: include scenarios/etcd.yml
+ include: scenarios/etcd.yml
+ when: db_driver == "etcd" and container_enabled == false
+
+- name: include scenarios/container.yml
+ include: scenarios/container.yml
+ when: db_driver == "etcd" and container_enabled == true
----\r
-- name: install ceph-common external package when ceph backend enabled\r
- apt:\r
- name: ceph-common\r
- when: enabled_backend == "ceph"\r
-\r
-- name: check for ceph-ansible source code existed\r
- stat:\r
- path: /opt/ceph-ansible\r
- ignore_errors: yes\r
- register: cephansibleexisted\r
-\r
-- name: download ceph-ansible source code\r
- git:\r
- repo: https://github.com/ceph/ceph-ansible.git\r
- dest: /opt/ceph-ansible\r
- when:\r
- - cephansibleexisted.stat.exists is undefined or cephansibleexisted.stat.exists == false\r
-\r
-- name: copy ceph inventory host into ceph-ansible directory\r
- copy:\r
- src: ../../../group_vars/ceph/ceph.hosts\r
- dest: /opt/ceph-ansible/ceph.hosts\r
-\r
-- name: copy ceph all.yml file into ceph-ansible group_vars directory\r
- copy:\r
- src: ../../../group_vars/ceph/all.yml\r
- dest: /opt/ceph-ansible/group_vars/all.yml\r
-\r
-- name: copy ceph osds.yml file into ceph-ansible group_vars directory\r
- copy:\r
- src: ../../../group_vars/ceph/osds.yml\r
- dest: /opt/ceph-ansible/group_vars/osds.yml\r
-\r
-- name: copy site.yml.sample to site.yml in ceph-ansible\r
- copy:\r
- src: /opt/ceph-ansible/site.yml.sample\r
- dest: /opt/ceph-ansible/site.yml\r
-\r
-- name: ping all hosts\r
- shell: ansible all -m ping -i ceph.hosts\r
- become: true\r
- args:\r
- chdir: /opt/ceph-ansible\r
-\r
-- name: run ceph-ansible playbook\r
- shell: ansible-playbook site.yml -i ceph.hosts\r
- become: true\r
- args:\r
- chdir: /opt/ceph-ansible\r
-\r
-- name: Check if ceph osd is running\r
- shell: ps aux | grep ceph-osd | grep -v grep\r
- ignore_errors: false\r
- changed_when: false\r
- register: service_ceph_osd_status\r
-\r
-- name: Check if ceph mon is running\r
- shell: ps aux | grep ceph-mon | grep -v grep\r
- ignore_errors: false\r
- changed_when: false\r
- register: service_ceph_mon_status\r
-\r
-- name: Create a pool and initialize it.\r
- shell: ceph osd pool create {{ ceph_pool_name }} 100 && ceph osd pool set {{ ceph_pool_name }} size 1\r
- ignore_errors: yes\r
- changed_when: false\r
- register: ceph_init_pool\r
+---
+- name: install ceph-common external package when ceph backend enabled
+ apt:
+ name: ceph-common
+ when: enabled_backend == "ceph"
+
+- name: copy opensds ceph backend file if specify ceph backend
+ copy:
+ src: ../../../group_vars/ceph/ceph.yaml
+ dest: "{{ ceph_config_path }}"
+
+- name: check for ceph-ansible source code existed
+ stat:
+ path: /opt/ceph-ansible
+ ignore_errors: yes
+ register: cephansibleexisted
+
+- name: download ceph-ansible source code
+ git:
+ repo: https://github.com/ceph/ceph-ansible.git
+ dest: /opt/ceph-ansible
+ when:
+ - cephansibleexisted.stat.exists is undefined or cephansibleexisted.stat.exists == false
+
+- name: copy ceph inventory host into ceph-ansible directory
+ copy:
+ src: ../../../group_vars/ceph/ceph.hosts
+ dest: /opt/ceph-ansible/ceph.hosts
+
+- name: copy ceph all.yml file into ceph-ansible group_vars directory
+ copy:
+ src: ../../../group_vars/ceph/all.yml
+ dest: /opt/ceph-ansible/group_vars/all.yml
+
+- name: copy ceph osds.yml file into ceph-ansible group_vars directory
+ copy:
+ src: ../../../group_vars/ceph/osds.yml
+ dest: /opt/ceph-ansible/group_vars/osds.yml
+
+- name: copy site.yml.sample to site.yml in ceph-ansible
+ copy:
+ src: /opt/ceph-ansible/site.yml.sample
+ dest: /opt/ceph-ansible/site.yml
+
+- name: ping all hosts
+ shell: ansible all -m ping -i ceph.hosts
+ become: true
+ args:
+ chdir: /opt/ceph-ansible
+
+- name: run ceph-ansible playbook
+ shell: ansible-playbook site.yml -i ceph.hosts
+ become: true
+ args:
+ chdir: /opt/ceph-ansible
+
+- name: Check if ceph osd is running
+ shell: ps aux | grep ceph-osd | grep -v grep
+ ignore_errors: false
+ changed_when: false
+ register: service_ceph_osd_status
+
+- name: Check if ceph mon is running
+ shell: ps aux | grep ceph-mon | grep -v grep
+ ignore_errors: false
+ changed_when: false
+ register: service_ceph_mon_status
+
+- name: Create a pool and initialize it.
+ shell: ceph osd pool create {{ ceph_pool_name }} 100 && ceph osd pool set {{ ceph_pool_name }} size 1
+ ignore_errors: yes
+ changed_when: false
+ register: ceph_init_pool
when: service_ceph_mon_status.rc == 0 and service_ceph_osd_status.rc == 0
\ No newline at end of file
----\r
+---
+- name: copy opensds cinder backend file if specify cinder backend
+ copy:
+ src: ../../../group_vars/cinder/cinder.yaml
+ dest: "{{ cinder_config_path }}"
----\r
-\r
-- name: install python-pip\r
- apt:\r
- name: python-pip\r
-\r
-- name: install lvm2\r
- apt:\r
- name: lvm2\r
-\r
-- name: install thin-provisioning-tools\r
- apt:\r
- name: thin-provisioning-tools\r
-\r
-- name: install docker-compose\r
- pip:\r
- name: docker-compose\r
-\r
-- name: create directory to save source code and volume group file\r
- file:\r
- path: "{{ cinder_data_dir }}"\r
- state: directory\r
- recurse: yes\r
-\r
-- name: create volume group in thin mode\r
- shell:\r
- _raw_params: |\r
- function _create_lvm_volume_group {\r
- local vg=$1\r
- local size=$2\r
-\r
- local backing_file={{ cinder_data_dir }}/${vg}.img\r
- if ! sudo vgs $vg; then\r
- # Only create if the file doesn't already exists\r
- [[ -f $backing_file ]] || truncate -s $size $backing_file\r
- local vg_dev\r
- vg_dev=`sudo losetup -f --show $backing_file`\r
-\r
- # Only create volume group if it doesn't already exist\r
- if ! sudo vgs $vg; then\r
- sudo vgcreate $vg $vg_dev\r
- fi\r
- fi\r
- }\r
- modprobe dm_thin_pool\r
- _create_lvm_volume_group {{ cinder_volume_group }} 10G\r
- args:\r
- executable: /bin/bash\r
- become: true\r
-\r
-- name: check for python-cinderclient source code existed\r
- stat:\r
- path: "{{ cinder_data_dir }}/python-cinderclient"\r
- ignore_errors: yes\r
- register: cinderclient_existed\r
-\r
-- name: download python-cinderclient source code\r
- git:\r
- repo: https://github.com/openstack/python-cinderclient.git\r
- dest: "{{ cinder_data_dir }}/python-cinderclient"\r
- when:\r
- - cinderclient_existed.stat.exists is undefined or cinderclient_existed.stat.exists == false\r
-\r
-# Tested successfully in this version `ab0185bfc6e8797a35a2274c2a5ee03afb03dd60`\r
-# git checkout -b ab0185bfc6e8797a35a2274c2a5ee03afb03dd60\r
-- name: pip install cinderclinet\r
- shell: |\r
- pip install -e .\r
- become: true\r
- args:\r
- chdir: "{{ cinder_data_dir }}/python-cinderclient"\r
-\r
-- name: check for python-brick-cinderclient-ext source code existed\r
- stat:\r
- path: "{{ cinder_data_dir }}/python-brick-cinderclient-ext"\r
- ignore_errors: yes\r
- register: brick_existed\r
-\r
-- name: download python-brick-cinderclient-ext source code\r
- git:\r
- repo: https://github.com/openstack/python-brick-cinderclient-ext.git\r
- dest: "{{ cinder_data_dir }}/python-brick-cinderclient-ext"\r
- when:\r
- - brick_existed.stat.exists is undefined or brick_existed.stat.exists == false\r
-\r
-# Tested successfully in this version `a281e67bf9c12521ea5433f86cec913854826a33`\r
-# git checkout -b a281e67bf9c12521ea5433f86cec913854826a33\r
-- name: pip install python-brick-cinderclient-ext\r
- shell: |\r
- pip install -e .\r
- become: true\r
- args:\r
- chdir: "{{ cinder_data_dir }}/python-brick-cinderclient-ext"\r
-\r
-\r
-- name: check for cinder source code existed\r
- stat:\r
- path: "{{ cinder_data_dir }}/cinder"\r
- ignore_errors: yes\r
- register: cinder_existed\r
-\r
-- name: download cinder source code\r
- git:\r
- repo: https://github.com/openstack/cinder.git\r
- dest: "{{ cinder_data_dir }}/cinder"\r
- when:\r
- - cinder_existed.stat.exists is undefined or cinder_existed.stat.exists == false\r
-\r
-# Tested successfully in this version `7bbc95344d3961d0bf059252723fa40b33d4b3fe`\r
-# git checkout -b 7bbc95344d3961d0bf059252723fa40b33d4b3fe\r
-- name: update blockbox configuration\r
- shell: |\r
- sed -i "s/PLATFORM ?= debian:stretch/PLATFORM ?= {{ cinder_container_platform }}/g" Makefile\r
- sed -i "s/TAG ?= debian-cinder:latest/TAG ?= {{ cinder_image_tag }}:latest/g" Makefile\r
-\r
- sed -i "s/image: debian-cinder/image: {{ cinder_image_tag }}/g" docker-compose.yml\r
- sed -i "s/image: lvm-debian-cinder/image: lvm-{{ cinder_image_tag }}/g" docker-compose.yml\r
-\r
- sed -i "s/volume_group = cinder-volumes /volume_group = {{ cinder_volume_group }}/g" etc/cinder.conf\r
- become: true\r
- args:\r
- chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"\r
-\r
-- name: make blockbox\r
- shell: make blockbox\r
- become: true\r
- args:\r
- chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"\r
-\r
-- name: start cinder-standalone service\r
- shell: docker-compose up -d\r
- become: true\r
- args:\r
- chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"\r
-\r
-- name: wait for cinder service to start normally\r
- wait_for:\r
- host: 127.0.0.1\r
- port: 8776\r
- delay: 2\r
- timeout: 120\r
+---
+
+- name: install python-pip
+ apt:
+ name: python-pip
+
+- name: install lvm2
+ apt:
+ name: lvm2
+
+- name: install thin-provisioning-tools
+ apt:
+ name: thin-provisioning-tools
+
+- name: install docker-compose
+ pip:
+ name: docker-compose
+
+- name: copy opensds cinder backend file if specify cinder backend
+ copy:
+ src: ../../../group_vars/cinder/cinder.yaml
+ dest: "{{ cinder_config_path }}"
+
+- name: create directory to save source code and volume group file
+ file:
+ path: "{{ cinder_data_dir }}"
+ state: directory
+ recurse: yes
+
+- name: create volume group in thin mode
+ shell:
+ _raw_params: |
+ function _create_lvm_volume_group {
+ local vg=$1
+ local size=$2
+
+ local backing_file={{ cinder_data_dir }}/${vg}.img
+ if ! sudo vgs $vg; then
+ # Only create if the file doesn't already exists
+ [[ -f $backing_file ]] || truncate -s $size $backing_file
+ local vg_dev
+ vg_dev=`sudo losetup -f --show $backing_file`
+
+ # Only create volume group if it doesn't already exist
+ if ! sudo vgs $vg; then
+ sudo vgcreate $vg $vg_dev
+ fi
+ fi
+ }
+ modprobe dm_thin_pool
+ _create_lvm_volume_group {{ cinder_volume_group }} 10G
+ args:
+ executable: /bin/bash
+ become: true
+
+- name: check for python-cinderclient source code existed
+ stat:
+ path: "{{ cinder_data_dir }}/python-cinderclient"
+ ignore_errors: yes
+ register: cinderclient_existed
+
+- name: download python-cinderclient source code
+ git:
+ repo: https://github.com/openstack/python-cinderclient.git
+ dest: "{{ cinder_data_dir }}/python-cinderclient"
+ when:
+ - cinderclient_existed.stat.exists is undefined or cinderclient_existed.stat.exists == false
+
+# Tested successfully in this version `ab0185bfc6e8797a35a2274c2a5ee03afb03dd60`
+# git checkout -b ab0185bfc6e8797a35a2274c2a5ee03afb03dd60
+- name: pip install cinderclinet
+ shell: |
+ pip install -e .
+ become: true
+ args:
+ chdir: "{{ cinder_data_dir }}/python-cinderclient"
+
+- name: check for python-brick-cinderclient-ext source code existed
+ stat:
+ path: "{{ cinder_data_dir }}/python-brick-cinderclient-ext"
+ ignore_errors: yes
+ register: brick_existed
+
+- name: download python-brick-cinderclient-ext source code
+ git:
+ repo: https://github.com/openstack/python-brick-cinderclient-ext.git
+ dest: "{{ cinder_data_dir }}/python-brick-cinderclient-ext"
+ when:
+ - brick_existed.stat.exists is undefined or brick_existed.stat.exists == false
+
+# Tested successfully in this version `a281e67bf9c12521ea5433f86cec913854826a33`
+# git checkout -b a281e67bf9c12521ea5433f86cec913854826a33
+- name: pip install python-brick-cinderclient-ext
+ shell: |
+ pip install -e .
+ become: true
+ args:
+ chdir: "{{ cinder_data_dir }}/python-brick-cinderclient-ext"
+
+
+- name: check for cinder source code existed
+ stat:
+ path: "{{ cinder_data_dir }}/cinder"
+ ignore_errors: yes
+ register: cinder_existed
+
+- name: download cinder source code
+ git:
+ repo: https://github.com/openstack/cinder.git
+ dest: "{{ cinder_data_dir }}/cinder"
+ when:
+ - cinder_existed.stat.exists is undefined or cinder_existed.stat.exists == false
+
+# Tested successfully in this version `7bbc95344d3961d0bf059252723fa40b33d4b3fe`
+# git checkout -b 7bbc95344d3961d0bf059252723fa40b33d4b3fe
+- name: update blockbox configuration
+ shell: |
+ sed -i "s/PLATFORM ?= debian:stretch/PLATFORM ?= {{ cinder_container_platform }}/g" Makefile
+ sed -i "s/TAG ?= debian-cinder:latest/TAG ?= {{ cinder_image_tag }}:latest/g" Makefile
+
+ sed -i "s/image: debian-cinder/image: {{ cinder_image_tag }}/g" docker-compose.yml
+ sed -i "s/image: lvm-debian-cinder/image: lvm-{{ cinder_image_tag }}/g" docker-compose.yml
+
+ sed -i "s/volume_group = cinder-volumes /volume_group = {{ cinder_volume_group }}/g" etc/cinder.conf
+ become: true
+ args:
+ chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"
+
+- name: make blockbox
+ shell: make blockbox
+ become: true
+ args:
+ chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"
+
+- name: start cinder-standalone service
+ shell: docker-compose up -d
+ become: true
+ args:
+ chdir: "{{ cinder_data_dir }}/cinder/contrib/block-box"
+
+- name: wait for cinder service to start normally
+ wait_for:
+ host: 127.0.0.1
+ port: 8776
+ delay: 2
+ timeout: 120
----\r
-- name: install lvm2 external package when lvm backend enabled\r
- apt:\r
- name: lvm2\r
-\r
-- name: check if physical volume existed\r
- shell: pvdisplay {{ pv_device }}\r
- ignore_errors: yes\r
- register: pv_existed\r
-\r
-- name: create a physical volume\r
- shell: pvcreate {{ pv_device }}\r
- when: pv_existed is undefined or pv_existed.rc != 0\r
-\r
-- name: check if volume group existed\r
- shell: vgdisplay {{ vg_name }}\r
- ignore_errors: yes\r
- register: vg_existed\r
-\r
-- name: create a volume group\r
- shell: vgcreate {{ vg_name }} {{ pv_device }}\r
- when: vg_existed is undefined or vg_existed.rc != 0\r
+---
+- name: install lvm2 external package when lvm backend enabled
+ apt:
+ name: lvm2
+
+- name: copy opensds lvm backend file if specify lvm backend
+ copy:
+ src: ../../../group_vars/lvm/lvm.yaml
+ dest: "{{ lvm_config_path }}"
+
+- name: check if physical volume existed
+ shell: pvdisplay {{ pv_device }}
+ ignore_errors: yes
+ register: pv_existed
+
+- name: create a physical volume
+ shell: pvcreate {{ pv_device }}
+ when: pv_existed is undefined or pv_existed.rc != 0
+
+- name: check if volume group existed
+ shell: vgdisplay {{ vg_name }}
+ ignore_errors: yes
+ register: vg_existed
+
+- name: create a volume group
+ shell: vgcreate {{ vg_name }} {{ pv_device }}
+ when: vg_existed is undefined or vg_existed.rc != 0
----\r
-- name: include scenarios/lvm.yml\r
- include: scenarios/lvm.yml\r
- when: enabled_backend == "lvm"\r
-\r
-- name: include scenarios/ceph.yml\r
- include: scenarios/ceph.yml\r
- when: enabled_backend == "ceph"\r
-\r
-- name: include scenarios/cinder.yml\r
- include: scenarios/cinder.yml\r
- when: enabled_backend == "cinder" and use_cinder_standalone == false\r
-\r
-- name: include scenarios/cinder_standalone.yml\r
- include: scenarios/cinder_standalone.yml\r
- when: enabled_backend == "cinder" and use_cinder_standalone == true\r
-\r
-- name: run osdsdock daemon service\r
- shell:\r
- cmd: |\r
- i=0\r
- while\r
- i="$((i+1))"\r
- [ "$i" -lt 4 ]\r
- do\r
- nohup bin/osdsdock &>/dev/null &\r
- sleep 5\r
- ps aux | grep osdsdock | grep -v grep && break\r
- done\r
- args:\r
- chdir: "{{ opensds_build_dir }}/out"\r
+---
+- name: include scenarios/lvm.yml
+ include: scenarios/lvm.yml
+ when: enabled_backend == "lvm"
+
+- name: include scenarios/ceph.yml
+ include: scenarios/ceph.yml
+ when: enabled_backend == "ceph"
+
+- name: include scenarios/cinder.yml
+ include: scenarios/cinder.yml
+ when: enabled_backend == "cinder" and use_cinder_standalone == false
+
+- name: include scenarios/cinder_standalone.yml
+ include: scenarios/cinder_standalone.yml
+ when: enabled_backend == "cinder" and use_cinder_standalone == true
+
+- name: run osdsdock daemon service
+ shell:
+ cmd: |
+ i=0
+ while
+ i="$((i+1))"
+ [ "$i" -lt 4 ]
+ do
+ nohup bin/osdsdock &>/dev/null &
+ sleep 5
+ ps aux | grep osdsdock | grep -v grep && break
+ done
+ args:
+ chdir: "{{ opensds_build_dir }}/out"
+ when: container_enabled == false
+
+- name: run osdsdock containerized service
+ docker:
+ name: osdsdock
+ image: opensdsio/opensds-dock:latest
+ state: started
+ net: host
+ privileged: true
+ volumes:
+ - "/etc/opensds/:/etc/opensds"
+ - "/etc/ceph/:/etc/ceph"
+ when: container_enabled == true
----\r
-- name: run osdslet daemon service\r
- shell:\r
- cmd: |\r
- i=0\r
- while\r
- i="$((i+1))"\r
- [ "$i" -lt 4 ]\r
- do\r
- nohup bin/osdslet > osdslet.out 2> osdslet.err < /dev/null &\r
- sleep 5\r
- ps aux | grep osdslet | grep -v grep && break\r
- done\r
- args:\r
- chdir: "{{ opensds_build_dir }}/out"\r
+---
+- name: run osdslet daemon service
+ shell:
+ cmd: |
+ i=0
+ while
+ i="$((i+1))"
+ [ "$i" -lt 4 ]
+ do
+ nohup bin/osdslet > osdslet.out 2> osdslet.err < /dev/null &
+ sleep 5
+ ps aux | grep osdslet | grep -v grep && break
+ done
+ args:
+ chdir: "{{ opensds_build_dir }}/out"
+ when: container_enabled == false
+
+- name: run osdslet containerized service
+ docker:
+ name: osdslet
+ image: opensdsio/opensds-controller:latest
+ state: started
+ net: host
+ volumes:
+ - "/etc/opensds/:/etc/opensds"
+ when: container_enabled == true
----\r
-# Defines deployment design and assigns role to server groups\r
-\r
-- name: deploy an opensds local cluster\r
- hosts: all\r
- remote_user: root\r
- vars_files:\r
- - group_vars/common.yml\r
- - group_vars/osdsdb.yml\r
- - group_vars/osdslet.yml\r
- - group_vars/osdsdock.yml\r
- gather_facts: false\r
- become: True\r
- roles:\r
- - common\r
- - osdsdb\r
- - osdslet\r
- - osdsdock\r
+---
+# Defines deployment design and assigns role to server groups
+
+- name: deploy an opensds local cluster
+ hosts: all
+ remote_user: root
+ vars_files:
+ - group_vars/common.yml
+ - group_vars/osdsdb.yml
+ - group_vars/osdslet.yml
+ - group_vars/osdsdock.yml
+ gather_facts: false
+ become: True
+ roles:
+ - common
+ - osdsdb
+ - osdslet
+ - osdsdock
Code Review / stor4nfv.git / commitdiff