jjb/functest/functest-alpine.sh

   1 #!/bin/bash
   2
   3 set -e
   4 set +u
   5 set +o pipefail
   6
   7 REPO=${REPO:-opnfv}
   8 CI_LOOP=${CI_LOOP:-daily}
   9 TEST_DB_URL=http://testresults.opnfv.org/test/api/v1/results
  10 ENERGY_RECORDER_API_URL=http://energy.opnfv.fr/resources
  11 DOCKER_TAG=${DOCKER_TAG:-$([[ ${BRANCH##*/} == "master" ]] && echo "latest" || echo ${BRANCH##*/})}
  12
  13 check_os_deployment() {
  14     FUNCTEST_IMAGE=${REPO}/functest-healthcheck:${DOCKER_TAG}
  15     echo "Functest: Pulling Functest Docker image ${FUNCTEST_IMAGE} ..."
  16     docker pull ${FUNCTEST_IMAGE}>/dev/null
  17     cmd="docker run --rm ${volumes} ${FUNCTEST_IMAGE} check_deployment"
  18     echo "Checking deployment, CMD: ${cmd}"
  19     eval ${cmd}
  20     ret_value=$?
  21     if [ ${ret_value} != 0 ]; then
  22         echo "ERROR: Problem while checking OpenStack deployment."
  23         exit 1
  24     else
  25         echo "OpenStack deployment OK."
  26     fi
  27
  28 }
  29
  30 run_tiers() {
  31     tiers=$1
  32     cmd_opt="run_tests -r -t all"
  33     [[ $BUILD_TAG =~ "suite" ]] && cmd_opt="run_tests -t all"
  34     for tier in ${tiers[@]}; do
  35         FUNCTEST_IMAGE=${REPO}/functest-${tier}:${DOCKER_TAG}
  36         echo "Functest: Pulling Functest Docker image ${FUNCTEST_IMAGE} ..."
  37         docker pull ${FUNCTEST_IMAGE}>/dev/null
  38         cmd="docker run --rm  ${envs} ${volumes} ${TESTCASE_OPTIONS} ${FUNCTEST_IMAGE} /bin/bash -c '${cmd_opt}'"
  39         echo "Running Functest tier '${tier}'. CMD: ${cmd}"
  40         eval ${cmd}
  41         ret_value=$?
  42         if [ ${ret_value} != 0 ]; then
  43             echo ${ret_value} > ${ret_val_file}
  44             if [ ${tier} == 'healthcheck' ]; then
  45                 echo "Healthcheck tier failed. Exiting Functest..."
  46                 skip_tests=1
  47                 break
  48             fi
  49         fi
  50     done
  51 }
  52
  53 run_test() {
  54     test_name=$1
  55     cmd_opt="run_tests -t ${test_name}"
  56     # Determine which Functest image should be used for the test case
  57     case ${test_name} in
  58         connection_check|tenantnetwork1|tenantnetwork2|vmready1|vmready2|singlevm1|singlevm2|vping_ssh|vping_userdata|cinder_test|odl|api_check|snaps_health_check|tempest_smoke)
  59             FUNCTEST_IMAGE=${REPO}/functest-healthcheck:${DOCKER_TAG} ;;
  60         neutron-tempest-plugin-api|rally_sanity|refstack_defcore|tempest_full|tempest_scenario|patrole|snaps_smoke|neutron_trunk|networking-bgpvpn|networking-sfc|barbican)
  61             FUNCTEST_IMAGE=${REPO}/functest-smoke:${DOCKER_TAG} ;;
  62         rally_full|rally_jobs|shaker|vmtp)
  63             FUNCTEST_IMAGE=${REPO}/functest-benchmarking:${DOCKER_TAG} ;;
  64         cloudify|cloudify_ims|heat_ims|vyos_vrouter|juju_epc)
  65             FUNCTEST_IMAGE=${REPO}/functest-vnf:${DOCKER_TAG} ;;
  66         doctor-notification|bgpvpn|functest-odl-sfc|barometercollectd|fds|vgpu|stor4nfv_os)
  67             FUNCTEST_IMAGE=${REPO}/functest-features:${DOCKER_TAG} ;;
  68         *)
  69             echo "Unkown test case $test_name"
  70             exit 1
  71             ;;
  72     esac
  73     echo "Functest: Pulling Functest Docker image ${FUNCTEST_IMAGE} ..."
  74     docker pull ${FUNCTEST_IMAGE}>/dev/null
  75     cmd="docker run --rm ${envs} ${volumes} ${TESTCASE_OPTIONS} ${FUNCTEST_IMAGE} /bin/bash -c '${cmd_opt}'"
  76     echo "Running Functest test case '${test_name}'. CMD: ${cmd}"
  77     eval ${cmd}
  78     ret_value=$?
  79     if [ ${ret_value} != 0 ]; then
  80       echo ${ret_value} > ${ret_val_file}
  81     fi
  82 }
  83
  84
  85 [[ $CI_DEBUG == true ]] && redirect="/dev/stdout" || redirect="/dev/null"
  86 redirect="/dev/stdout"
  87 FUNCTEST_DIR=/home/opnfv/functest
  88 DEPLOY_TYPE=baremetal
  89 [[ $BUILD_TAG =~ "virtual" ]] && DEPLOY_TYPE=virt
  90 HOST_ARCH=$(uname -m)
  91
  92 # Prepare OpenStack credentials volume
  93 rc_file=${HOME}/opnfv-openrc.sh
  94
  95 if [[ ${INSTALLER_TYPE} == 'joid' ]]; then
  96     rc_file=$LAB_CONFIG/admin-openrc
  97 elif [[ ${INSTALLER_TYPE} == 'compass' ]]; then
  98     cacert_file_vol="-v ${HOME}/os_cacert:${FUNCTEST_DIR}/conf/os_cacert"
  99     echo "export OS_CACERT=${FUNCTEST_DIR}/conf/os_cacert" >> ${HOME}/opnfv-openrc.sh
 100 elif [[ ${INSTALLER_TYPE} == 'fuel' ]] && [[ "${DEPLOY_SCENARIO}" =~ -ha$ ]]; then
 101     cacert_file_vol="-v ${HOME}/os_cacert:/etc/ssl/certs/mcp_os_cacert"
 102 fi
 103
 104 rc_file_vol="-v ${rc_file}:${FUNCTEST_DIR}/conf/env_file"
 105
 106 echo "Functest: Start Docker and prepare environment"
 107
 108 echo "Functest: Download images that will be used by test cases"
 109 env
 110 pwd
 111 ls -l
 112 images_dir="${HOME}/opnfv/functest/images"
 113 download_script=${WORKSPACE}/functest/ci/download_images.sh
 114 chmod +x ${download_script}
 115 ${download_script} ${images_dir} ${DEPLOY_SCENARIO} ${HOST_ARCH} 2> ${redirect}
 116
 117 images_vol="-v ${images_dir}:${FUNCTEST_DIR}/images"
 118
 119 dir_result="${HOME}/opnfv/functest/results/${BRANCH##*/}"
 120 mkdir -p ${dir_result}
 121 sudo rm -rf ${dir_result}/*
 122 results_vol="-v ${dir_result}:${FUNCTEST_DIR}/results"
 123 custom_params=
 124 test -f ${HOME}/opnfv/functest/custom/params_${DOCKER_TAG} && custom_params=$(cat ${HOME}/opnfv/functest/custom/params_${DOCKER_TAG})
 125
 126 envs="-e INSTALLER_TYPE=${INSTALLER_TYPE} -e INSTALLER_IP=${INSTALLER_IP} \
 127     -e NODE_NAME=${NODE_NAME} -e DEPLOY_SCENARIO=${DEPLOY_SCENARIO} \
 128     -e BUILD_TAG=${BUILD_TAG} -e DEPLOY_TYPE=${DEPLOY_TYPE} -e CI_LOOP=${CI_LOOP} \
 129     -e TEST_DB_URL=${TEST_DB_URL} -e ENERGY_RECORDER_API_URL=${ENERGY_RECORDER_API_URL}"
 130
 131 ssh_options="-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no"
 132
 133 if [ "${INSTALLER_TYPE}" == 'fuel' ]; then
 134     COMPUTE_ARCH=$(ssh -l ubuntu ${INSTALLER_IP} -i ${SSH_KEY} ${ssh_options} \
 135         "sudo salt 'cmp*' grains.get cpuarch --out yaml | awk '{print \$2; exit}'")
 136     IMAGE_PROPERTIES="hw_disk_bus:scsi,hw_scsi_model:virtio-scsi"
 137     envs="${envs} -e POD_ARCH=${COMPUTE_ARCH}"
 138 fi
 139
 140 if [[ ${INSTALLER_TYPE} == 'fuel' && ${DEPLOY_SCENARIO} == 'os-nosdn-nofeature-noha' ]]; then
 141     libvirt_vol="-v ${ssh_key}:${FUNCTEST_DIR}/conf/libvirt_key"
 142     envs="${envs} -e LIBVIRT_USER=ubuntu -e LIBVIRT_KEY_PATH=${FUNCTEST_DIR}/conf/libvirt_key"
 143 fi
 144
 145 if [[ ${INSTALLER_TYPE} == 'compass' && ${DEPLOY_SCENARIO} =~ 'sfc' ]]; then
 146     ssh_key="/tmp/id_rsa"
 147     user_config="/tmp/openstack_user_config.yml"
 148     docker cp compass-tasks:/root/.ssh/id_rsa $ssh_key
 149     docker cp compass-tasks:/etc/openstack_deploy/openstack_user_config.yml $user_config
 150     sshkey_vol="-v ${ssh_key}:/root/.ssh/id_rsa"
 151     userconfig_vol="-v ${user_config}:${user_config}"
 152     envs="${envs} -e EXTERNAL_NETWORK=${EXTERNAL_NETWORK}"
 153 fi
 154
 155 if [[ ${INSTALLER_TYPE} == 'compass' ]] || [[ ${DEPLOY_SCENARIO} == *"odl"* ]]; then
 156       envs="${envs} -e SDN_CONTROLLER_RESTCONFPORT=8080"
 157 fi
 158
 159 if [[ ${DEPLOY_SCENARIO} == *"ovs"* ]] || [[ ${DEPLOY_SCENARIO} == *"fdio"* ]]; then
 160     if [[ -n ${IMAGE_PROPERTIES} ]]; then
 161         IMAGE_PROPERTIES="${IMAGE_PROPERTIES},hw_mem_page_size:large"
 162     else
 163         IMAGE_PROPERTIES="hw_mem_page_size:large"
 164     fi
 165     FLAVOR_EXTRA_SPECS="hw:mem_page_size:large"
 166 fi
 167
 168 if [[ -n ${IMAGE_PROPERTIES} ]] || [[ -n ${FLAVOR_EXTRA_SPECS} ]]; then
 169     envs="${envs} -e IMAGE_PROPERTIES=${IMAGE_PROPERTIES} -e FLAVOR_EXTRA_SPECS=${FLAVOR_EXTRA_SPECS}"
 170 fi
 171
 172 tempest_conf_yaml=$(mktemp)
 173 case ${INSTALLER_TYPE} in
 174 apex)
 175     cat << EOF > "${tempest_conf_yaml}"
 176 ---
 177 compute-feature-enabled:
 178     shelve: false
 179     vnc_console: true
 180 identity-feature-enabled:
 181     api_v2: false
 182     api_v2_admin: false
 183 image-feature-enabled:
 184     api_v2: true
 185     api_v1: false
 186 volume:
 187     storage_protocol: ceph
 188 volume-feature-enabled:
 189     backup: false
 190 EOF
 191     ;;
 192 compass)
 193     cat << EOF > "${tempest_conf_yaml}"
 194 ---
 195 compute-feature-enabled:
 196     shelve: false
 197     vnc_console: false
 198     spice_console: true
 199 identity-feature-enabled:
 200     api_v2: false
 201     api_v2_admin: false
 202 image-feature-enabled:
 203     api_v2: true
 204     api_v1: false
 205 volume:
 206     storage_protocol: ceph
 207 volume-feature-enabled:
 208     backup: false
 209 EOF
 210     ;;
 211 fuel)
 212     cat << EOF > "${tempest_conf_yaml}"
 213 ---
 214 compute-feature-enabled:
 215     shelve: false
 216     vnc_console: false
 217     spice_console: true
 218 identity-feature-enabled:
 219     api_v2: false
 220     api_v2_admin: false
 221 image-feature-enabled:
 222     api_v2: true
 223     api_v1: false
 224 volume:
 225     storage_protocol: iSCSI
 226 volume-feature-enabled:
 227     backup: false
 228 EOF
 229     ;;
 230 *)
 231     cat << EOF > "${tempest_conf_yaml}"
 232 ---
 233 compute-feature-enabled:
 234     shelve: false
 235     vnc_console: false
 236 identity-feature-enabled:
 237     api_v2: false
 238     api_v2_admin: false
 239 image-feature-enabled:
 240     api_v2: true
 241     api_v1: false
 242 volume:
 243     storage_protocol: iSCSI
 244 volume-feature-enabled:
 245     backup: false
 246 EOF
 247     ;;
 248 esac
 249 echo "tempest_conf.yaml:" && cat "${tempest_conf_yaml}"
 250
 251 volumes="${images_vol} ${results_vol} ${sshkey_vol} ${libvirt_vol} \
 252     ${userconfig_vol} ${rc_file_vol} ${cacert_file_vol} \
 253     -v ${tempest_conf_yaml}:/usr/lib/python2.7/site-packages/functest/opnfv_tests/openstack/tempest/custom_tests/tempest_conf.yaml"
 254
 255 ret_val_file="${HOME}/opnfv/functest/results/${BRANCH##*/}/return_value"
 256 echo 0 > ${ret_val_file}
 257
 258 set +e
 259
 260 if [ ${FUNCTEST_MODE} == 'testcase' ]; then
 261     echo "FUNCTEST_MODE=testcase, FUNCTEST_SUITE_NAME=${FUNCTEST_SUITE_NAME}"
 262     run_test ${FUNCTEST_SUITE_NAME}
 263 elif [ ${FUNCTEST_MODE} == 'tier' ]; then
 264     echo "FUNCTEST_MODE=tier, FUNCTEST_TIER=${FUNCTEST_TIER}"
 265     tiers=(${FUNCTEST_TIER})
 266     run_tiers ${tiers}
 267 else
 268     tests=()
 269     skip_tests=0
 270     if [ ${DEPLOY_TYPE} == 'baremetal' ] && [ "${HOST_ARCH}" != "aarch64" ]; then
 271         if [[ ${BRANCH} == "stable/fraser" ]]; then
 272             tiers=(healthcheck smoke features vnf parser)
 273             tests=(tempest_full_parallel)
 274         elif [[ ${BRANCH} == "stable/gambia" ]]; then
 275             tiers=(healthcheck smoke benchmarking features vnf components)
 276         else
 277             tiers=(healthcheck smoke benchmarking features vnf)
 278         fi
 279     else
 280         if [[ ${BRANCH} == "stable/fraser" ]]; then
 281             tiers=(healthcheck smoke features parser)
 282             tests=(tempest_full_parallel)
 283         elif [[ ${BRANCH} == "stable/gambia" ]]; then
 284             tiers=(healthcheck smoke benchmarking features vnf components)
 285         else
 286             tiers=(healthcheck smoke benchmarking features)
 287         fi
 288     fi
 289     run_tiers ${tiers}
 290     if [ ${skip_tests} -eq 0 ]; then
 291         for test in "${tests[@]}"; do
 292             run_test "$test"
 293         done
 294     fi
 295 fi