NFVBENCH-105 ARP not working with NFVbench 2.0

Fix type in arp record field.
Remove unneeded code.

Change-Id: I7a77f66c5e1c357907f4fd113f864708a351f152
Signed-off-by: ahothan <ahothan@cisco.com>

diff --git a/docs/development/design/ndrpdr.rst b/docs/development/design/ndrpdr.rst
index e34e8ba..dd769c0 100644 (file)
--- a/docs/development/design/ndrpdr.rst
+++ b/docs/development/design/ndrpdr.rst
@@ -79,5 +79,5 @@ consideration:
 - actual Tx rate is always <= requested Tx rate
 - the measured drop rate should always be relative to the actual Tx rate
 - if the actual Tx rate is < requested Tx rate and the measured drop rate is already within threshold
- (<NDR/PDR threshold) then the binary search must stop with proper warning because the actual NDR/PDR
- might probably be higher than the reported values
+  (<NDR/PDR threshold) then the binary search must stop with proper warning because the actual NDR/PDR
+  might probably be higher than the reported values

diff --git a/docs/development/design/versioning.rst b/docs/development/design/versioning.rst
index 870ed86..8103534 100644 (file)
--- a/docs/development/design/versioning.rst
+++ b/docs/development/design/versioning.rst
@@ -8,15 +8,9 @@ Versioning
 ==========
 
 NFVbench uses semver compatible git tags such as "1.0.0". These tags are also called project tags and applied at important commits on the master branch exclusively.
-Rules for the version numbers follow the semver 2.0 specification (http://semver.org).
+Rules for the version numbers follow the semver 2.0 specification (https://semver.org).
 These git tags are applied indepently of the OPNFV release tags which are applied only on the stable release branches (e.g. "opnfv-5.0.0").
 
 In general it is recommeneded to always have a project git version tag associated to any OPNFV release tag content obtained from a sync from master.
 
 NFVbench Docker containers will be versioned based on the OPNF release tags or based on NFVbench project tags.
-
-
-
-
-
-

diff --git a/docs/testing/developer/devguide/index.rst b/docs/testing/developer/devguide/index.rst
index e69de29..e219889 100644 (file)
--- a/docs/testing/developer/devguide/index.rst
+++ b/docs/testing/developer/devguide/index.rst
@@ -0,0 +1,8 @@
+.. _nfvbench-releasenotes:
+
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+***************
+Developer Guide
+***************

diff --git a/docs/testing/user/configguide/configguide.rst b/docs/testing/user/configguide/configguide.rst
index e69de29..f790d21 100644 (file)
--- a/docs/testing/user/configguide/configguide.rst
+++ b/docs/testing/user/configguide/configguide.rst
@@ -0,0 +1,8 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Cisco Systems, Inc
+
+*******************
+Configuration Guide
+*******************

diff --git a/nfvbench/traffic_client.py b/nfvbench/traffic_client.py
index 810f7dd..34d93cf 100755 (executable)
--- a/nfvbench/traffic_client.py
+++ b/nfvbench/traffic_client.py
@@ -463,7 +463,6 @@ class TrafficClient(object):
 
     def setup(self):
         """Set up the traffic client."""
-        self.gen.set_mode()
         self.gen.clear_stats()
 
     def get_version(self):

diff --git a/nfvbench/traffic_gen/trex.py b/nfvbench/traffic_gen/trex.py
index 2f271aa..5701297 100644 (file)
--- a/nfvbench/traffic_gen/trex.py
+++ b/nfvbench/traffic_gen/trex.py
@@ -11,6 +11,7 @@
 #    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #    License for the specific language governing permissions and limitations
 #    under the License.
+"""Driver module for TRex traffic generator."""
 
 import os
 import random
@@ -19,7 +20,6 @@ import traceback
 
 from itertools import count
 from nfvbench.log import LOG
-from nfvbench.specs import ChainType
 from nfvbench.traffic_server import TRexTrafficServer
 from nfvbench.utils import cast_integer
 from nfvbench.utils import timeout
@@ -61,6 +61,7 @@ class TRex(AbstractTrafficGenerator):
     LATENCY_PG_ID_MASK = 0x0100
 
     def __init__(self, traffic_client):
+        """Trex driver."""
         AbstractTrafficGenerator.__init__(self, traffic_client)
         self.client = None
         self.id = count()
@@ -417,32 +418,6 @@ class TRex(AbstractTrafficGenerator):
                                             (self.port_info[0]['speed'],
                                              self.port_info[1]['speed']))
 
-    def set_mode(self):
-        if self.config.service_chain == ChainType.EXT and not self.config.no_arp:
-            self.__set_l3_mode()
-        else:
-            self.__set_l2_mode()
-
-    def __set_l3_mode(self):
-        self.client.set_service_mode(ports=self.port_handle, enabled=True)
-        for port, device in zip(self.port_handle, self.generator_config.devices):
-            try:
-                self.client.set_l3_mode(port=port,
-                                        src_ipv4=device.tg_gateway_ip,
-                                        dst_ipv4=device.dst.gateway_ip,
-                                        vlan=device.vlan_tag if device.vlan_tagging else None)
-            except STLError:
-                # TRex tries to resolve ARP already, doesn't have to be successful yet
-                continue
-        self.client.set_service_mode(ports=self.port_handle, enabled=False)
-
-    def __set_l2_mode(self):
-        self.client.set_service_mode(ports=self.port_handle, enabled=True)
-        for port, device in zip(self.port_handle, self.generator_config.devices):
-            for cfg in device.get_stream_configs():
-                self.client.set_l2_mode(port=port, dst_mac=cfg['mac_dst'])
-        self.client.set_service_mode(ports=self.port_handle, enabled=False)
-
     def __start_server(self):
         server = TRexTrafficServer()
         server.run_server(self.generator_config)
@@ -470,8 +445,9 @@ class TRex(AbstractTrafficGenerator):
                 STLServiceARP(ctx,
                               src_ip=cfg['ip_src_tg_gw'],
                               dst_ip=cfg['mac_discovery_gw'],
-                              vlan=device.vlan_tag if device.vlan_tagging else None)
-                for cfg in stream_configs()
+                              # will be None if no vlan tagging
+                              vlan=cfg['vlan_tag'])
+                for cfg in stream_configs
             ]
 
             for attempt in range(self.config.generic_retry_count):
@@ -485,11 +461,12 @@ class TRex(AbstractTrafficGenerator):
                 for chain_id, mac in enumerate(dst_macs):
                     if not mac:
                         arp_record = arps[chain_id].get_record()
-                        if arp_record.dest_mac:
+                        if arp_record.dst_mac:
                             dst_macs[chain_id] = arp_record.dst_mac
                             dst_macs_count += 1
-                            LOG.info('   ARP: port=%d chain=%d IP=%s -> MAC=%s',
+                            LOG.info('   ARP: port=%d chain=%d src IP=%s dst IP=%s -> MAC=%s',
                                      port, chain_id,
+                                     arp_record.src_ip,
                                      arp_record.dst_ip, arp_record.dst_mac)
                         else:
                             unresolved.append(arp_record.dst_ip)