These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / drivers / phy / Kconfig

diff --git a/kernel/drivers/phy/Kconfig b/kernel/drivers/phy/Kconfig
index fc9b9f0..03cb3ea 100644 (file)
--- a/kernel/drivers/phy/Kconfig
+++ b/kernel/drivers/phy/Kconfig
@@ -54,6 +54,39 @@ config PHY_EXYNOS_MIPI_VIDEO
          Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
          and EXYNOS SoCs.
 
+config PHY_LPC18XX_USB_OTG
+       tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
+       depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+       depends on MFD_SYSCON
+       select GENERIC_PHY
+       help
+         Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
+
+         This driver is need for USB0 support on LPC18xx/43xx and takes
+         care of enabling and clock setup.
+
+config PHY_PXA_28NM_HSIC
+       tristate "Marvell USB HSIC 28nm PHY Driver"
+       depends on HAS_IOMEM
+       select GENERIC_PHY
+       help
+         Enable this to support Marvell USB HSIC PHY driver for Marvell
+         SoC. This driver will do the PHY initialization and shutdown.
+         The PHY driver will be used by Marvell ehci driver.
+
+         To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+       tristate "Marvell USB 2.0 28nm PHY Driver"
+       depends on HAS_IOMEM
+       select GENERIC_PHY
+       help
+         Enable this to support Marvell USB 2.0 PHY driver for Marvell
+         SoC. This driver will do the PHY initialization and shutdown.
+         The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+         To compile this driver as a module, choose M here.
+
 config PHY_MVEBU_SATA
        def_bool y
        depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
@@ -173,10 +206,21 @@ config PHY_HIX5HD2_SATA
        help
          Support for SATA PHY on Hisilicon hix5hd2 Soc.
 
+config PHY_MT65XX_USB3
+       tristate "Mediatek USB3.0 PHY Driver"
+       depends on ARCH_MEDIATEK && OF
+       select GENERIC_PHY
+       help
+         Say 'Y' here to add support for Mediatek USB3.0 PHY driver
+         for mt65xx SoCs. it supports two usb2.0 ports and
+         one usb3.0 port.
+
 config PHY_SUN4I_USB
        tristate "Allwinner sunxi SoC USB PHY driver"
        depends on ARCH_SUNXI && HAS_IOMEM && OF
        depends on RESET_CONTROLLER
+       depends on EXTCON
+       depends on POWER_SUPPLY
        select GENERIC_PHY
        help
          Enable this to support the transceiver that is part of Allwinner
@@ -189,6 +233,7 @@ config PHY_SUN9I_USB
        tristate "Allwinner sun9i SoC USB PHY driver"
        depends on ARCH_SUNXI && HAS_IOMEM && OF
        depends on RESET_CONTROLLER
+       depends on USB_COMMON
        select GENERIC_PHY
        help
          Enable this to support the transceiver that is part of Allwinner
@@ -247,6 +292,13 @@ config PHY_EXYNOS5_USBDRD
          This driver provides PHY interface for USB 3.0 DRD controller
          present on Exynos5 SoC series.
 
+config PHY_PISTACHIO_USB
+       tristate "IMG Pistachio USB2.0 PHY driver"
+       depends on MACH_PISTACHIO
+       select GENERIC_PHY
+       help
+         Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
+
 config PHY_QCOM_APQ8064_SATA
        tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
        depends on ARCH_QCOM
@@ -313,4 +365,29 @@ config PHY_QCOM_UFS
        help
          Support for UFS PHY on QCOM chipsets.
 
+config PHY_TUSB1210
+       tristate "TI TUSB1210 ULPI PHY module"
+       depends on USB_ULPI_BUS
+       select GENERIC_PHY
+       help
+         Support for TI TUSB1210 USB ULPI PHY.
+
+config PHY_BRCMSTB_SATA
+       tristate "Broadcom STB SATA PHY driver"
+       depends on ARCH_BRCMSTB
+       depends on OF
+       select GENERIC_PHY
+       help
+         Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
+         Likely useful only with CONFIG_SATA_BRCMSTB enabled.
+
+config PHY_CYGNUS_PCIE
+       tristate "Broadcom Cygnus PCIe PHY driver"
+       depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+       select GENERIC_PHY
+       default ARCH_BCM_CYGNUS
+       help
+         Enable this to support the Broadcom Cygnus PCIe PHY.
+         If unsure, say N.
+
 endmenu