These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / drivers / phy / Kconfig

diff --git a/kernel/drivers/phy/Kconfig b/kernel/drivers/phy/Kconfig
index fc9b9f0..03cb3ea 100644 (file)
--- a/kernel/drivers/phy/Kconfig
+++ b/kernel/drivers/phy/Kconfig
@@ -54,6 +54,39 @@ config PHY_EXYNOS_MIPI_VIDEO
          Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
          and EXYNOS SoCs.
 
          Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
          and EXYNOS SoCs.
 

+config PHY_LPC18XX_USB_OTG
+       tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
+       depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+       depends on MFD_SYSCON
+       select GENERIC_PHY
+       help
+         Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
+
+         This driver is need for USB0 support on LPC18xx/43xx and takes
+         care of enabling and clock setup.
+
+config PHY_PXA_28NM_HSIC
+       tristate "Marvell USB HSIC 28nm PHY Driver"
+       depends on HAS_IOMEM
+       select GENERIC_PHY
+       help
+         Enable this to support Marvell USB HSIC PHY driver for Marvell
+         SoC. This driver will do the PHY initialization and shutdown.
+         The PHY driver will be used by Marvell ehci driver.
+
+         To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+       tristate "Marvell USB 2.0 28nm PHY Driver"
+       depends on HAS_IOMEM
+       select GENERIC_PHY
+       help
+         Enable this to support Marvell USB 2.0 PHY driver for Marvell
+         SoC. This driver will do the PHY initialization and shutdown.
+         The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+         To compile this driver as a module, choose M here.
+

 config PHY_MVEBU_SATA
        def_bool y
        depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
 config PHY_MVEBU_SATA
        def_bool y
        depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD


@@ -173,10 +206,21 @@ config PHY_HIX5HD2_SATA
        help
          Support for SATA PHY on Hisilicon hix5hd2 Soc.
 
        help
          Support for SATA PHY on Hisilicon hix5hd2 Soc.
 

+config PHY_MT65XX_USB3
+       tristate "Mediatek USB3.0 PHY Driver"
+       depends on ARCH_MEDIATEK && OF
+       select GENERIC_PHY
+       help
+         Say 'Y' here to add support for Mediatek USB3.0 PHY driver
+         for mt65xx SoCs. it supports two usb2.0 ports and
+         one usb3.0 port.
+

 config PHY_SUN4I_USB
        tristate "Allwinner sunxi SoC USB PHY driver"
        depends on ARCH_SUNXI && HAS_IOMEM && OF
        depends on RESET_CONTROLLER
 config PHY_SUN4I_USB
        tristate "Allwinner sunxi SoC USB PHY driver"
        depends on ARCH_SUNXI && HAS_IOMEM && OF
        depends on RESET_CONTROLLER

+       depends on EXTCON
+       depends on POWER_SUPPLY

        select GENERIC_PHY
        help
          Enable this to support the transceiver that is part of Allwinner
        select GENERIC_PHY
        help
          Enable this to support the transceiver that is part of Allwinner


@@ -189,6 +233,7 @@ config PHY_SUN9I_USB
        tristate "Allwinner sun9i SoC USB PHY driver"
        depends on ARCH_SUNXI && HAS_IOMEM && OF
        depends on RESET_CONTROLLER
        tristate "Allwinner sun9i SoC USB PHY driver"
        depends on ARCH_SUNXI && HAS_IOMEM && OF
        depends on RESET_CONTROLLER

+       depends on USB_COMMON

        select GENERIC_PHY
        help
          Enable this to support the transceiver that is part of Allwinner
        select GENERIC_PHY
        help
          Enable this to support the transceiver that is part of Allwinner


@@ -247,6 +292,13 @@ config PHY_EXYNOS5_USBDRD
          This driver provides PHY interface for USB 3.0 DRD controller
          present on Exynos5 SoC series.
 
          This driver provides PHY interface for USB 3.0 DRD controller
          present on Exynos5 SoC series.
 

+config PHY_PISTACHIO_USB
+       tristate "IMG Pistachio USB2.0 PHY driver"
+       depends on MACH_PISTACHIO
+       select GENERIC_PHY
+       help
+         Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
+

 config PHY_QCOM_APQ8064_SATA
        tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
        depends on ARCH_QCOM
 config PHY_QCOM_APQ8064_SATA
        tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
        depends on ARCH_QCOM


@@ -313,4 +365,29 @@ config PHY_QCOM_UFS
        help
          Support for UFS PHY on QCOM chipsets.
 
        help
          Support for UFS PHY on QCOM chipsets.
 

+config PHY_TUSB1210
+       tristate "TI TUSB1210 ULPI PHY module"
+       depends on USB_ULPI_BUS
+       select GENERIC_PHY
+       help
+         Support for TI TUSB1210 USB ULPI PHY.
+
+config PHY_BRCMSTB_SATA
+       tristate "Broadcom STB SATA PHY driver"
+       depends on ARCH_BRCMSTB
+       depends on OF
+       select GENERIC_PHY
+       help
+         Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
+         Likely useful only with CONFIG_SATA_BRCMSTB enabled.
+
+config PHY_CYGNUS_PCIE
+       tristate "Broadcom Cygnus PCIe PHY driver"
+       depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+       select GENERIC_PHY
+       default ARCH_BCM_CYGNUS
+       help
+         Enable this to support the Broadcom Cygnus PCIe PHY.
+         If unsure, say N.
+

 endmenu
 endmenu