};
/**
- * struct clk_pll_params - PLL parameters
+ * struct tegra_clk_pll_params - PLL parameters
*
* @input_min: Minimum input frequency
* @input_max: Maximum input frequency
* @base_reg: PLL base reg offset
* @misc_reg: PLL misc reg offset
* @lock_reg: PLL lock reg offset
- * @lock_bit_idx: Bit index for PLL lock status
+ * @lock_mask: Bitmask for PLL lock status
* @lock_enable_bit_idx: Bit index to enable PLL lock
+ * @iddq_reg: PLL IDDQ register offset
+ * @iddq_bit_idx: Bit index to enable PLL IDDQ
+ * @aux_reg: AUX register offset
+ * @dyn_ramp_reg: Dynamic ramp control register offset
+ * @ext_misc_reg: Miscellaneous control register offsets
+ * @pmc_divnm_reg: n, m divider PMC override register offset (PLLM)
+ * @pmc_divp_reg: p divider PMC override register offset (PLLM)
+ * @flags: PLL flags
+ * @stepa_shift: Dynamic ramp step A field shift
+ * @stepb_shift: Dynamic ramp step B field shift
* @lock_delay: Delay in us if PLL lock is not used
+ * @max_p: maximum value for the p divider
+ * @pdiv_tohw: mapping of p divider to register values
+ * @div_nmp: offsets and widths on n, m and p fields
+ * @freq_table: array of frequencies supported by PLL
+ * @fixed_rate: PLL rate if it is fixed
+ *
+ * Flags:
+ * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
+ * PLL locking. If not set it will use lock_delay value to wait.
+ * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
+ * that it is PLLU and invert post divider value.
+ * TEGRA_PLLM - PLLM has additional override settings in PMC. This
+ * flag indicates that it is PLLM and use override settings.
+ * TEGRA_PLL_FIXED - We are not supposed to change output frequency
+ * of some plls.
+ * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
+ * base register.
+ * TEGRA_PLL_BYPASS - PLL has bypass bit
+ * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
*/
struct tegra_clk_pll_params {
unsigned long input_min;
unsigned long fixed_rate;
};
+#define TEGRA_PLL_USE_LOCK BIT(0)
+#define TEGRA_PLL_HAS_CPCON BIT(1)
+#define TEGRA_PLL_SET_LFCON BIT(2)
+#define TEGRA_PLL_SET_DCCON BIT(3)
+#define TEGRA_PLLU BIT(4)
+#define TEGRA_PLLM BIT(5)
+#define TEGRA_PLL_FIXED BIT(6)
+#define TEGRA_PLLE_CONFIGURE BIT(7)
+#define TEGRA_PLL_LOCK_MISC BIT(8)
+#define TEGRA_PLL_BYPASS BIT(9)
+#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
+
/**
* struct tegra_clk_pll - Tegra PLL clock
*
* @hw: handle between common and hardware-specifix interfaces
* @clk_base: address of CAR controller
* @pmc: address of PMC, required to read override bits
- * @freq_table: array of frequencies supported by PLL
- * @params: PLL parameters
- * @flags: PLL flags
- * @fixed_rate: PLL rate if it is fixed
* @lock: register lock
- *
- * Flags:
- * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
- * PLL locking. If not set it will use lock_delay value to wait.
- * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
- * to be programmed to change output frequency of the PLL.
- * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
- * to be programmed to change output frequency of the PLL.
- * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
- * to be programmed to change output frequency of the PLL.
- * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
- * that it is PLLU and invert post divider value.
- * TEGRA_PLLM - PLLM has additional override settings in PMC. This
- * flag indicates that it is PLLM and use override settings.
- * TEGRA_PLL_FIXED - We are not supposed to change output frequency
- * of some plls.
- * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
- * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
- * base register.
- * TEGRA_PLL_BYPASS - PLL has bypass bit
- * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
+ * @params: PLL parameters
*/
struct tegra_clk_pll {
struct clk_hw hw;
#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
-#define TEGRA_PLL_USE_LOCK BIT(0)
-#define TEGRA_PLL_HAS_CPCON BIT(1)
-#define TEGRA_PLL_SET_LFCON BIT(2)
-#define TEGRA_PLL_SET_DCCON BIT(3)
-#define TEGRA_PLLU BIT(4)
-#define TEGRA_PLLM BIT(5)
-#define TEGRA_PLL_FIXED BIT(6)
-#define TEGRA_PLLE_CONFIGURE BIT(7)
-#define TEGRA_PLL_LOCK_MISC BIT(8)
-#define TEGRA_PLL_BYPASS BIT(9)
-#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
+/**
+ * struct tegra_audio_clk_info - Tegra Audio Clk Information
+ *
+ * @name: name for the audio pll
+ * @pll_params: pll_params for audio pll
+ * @clk_id: clk_ids for the audio pll
+ * @parent: name of the parent of the audio pll
+ */
+struct tegra_audio_clk_info {
+ char *name;
+ struct tegra_clk_pll_params *pll_params;
+ int clk_id;
+ char *parent;
+};
extern const struct clk_ops tegra_clk_pll_ops;
extern const struct clk_ops tegra_clk_plle_ops;
char *con_id;
};
+void tegra_init_special_resets(unsigned int num, int (*assert)(unsigned long),
+ int (*deassert)(unsigned long));
+
void tegra_init_from_table(struct tegra_clk_init_table *tbl,
struct clk *clks[], int clk_max);
void tegra_audio_clk_init(void __iomem *clk_base,
void __iomem *pmc_base, struct tegra_clk *tegra_clks,
- struct tegra_clk_pll_params *pll_params);
+ struct tegra_audio_clk_info *audio_info,
+ unsigned int num_plls);
void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base,
struct tegra_clk *tegra_clks,
void __iomem *pmc_base, struct tegra_clk *tegra_clks,
struct tegra_clk_pll_params *pll_params);
+#ifdef CONFIG_TEGRA_CLK_EMC
+struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np,
+ spinlock_t *lock);
+#else
+static inline struct clk *tegra_clk_register_emc(void __iomem *base,
+ struct device_node *np,
+ spinlock_t *lock)
+{
+ return NULL;
+}
+#endif
+
void tegra114_clock_tune_cpu_trimmers_high(void);
void tegra114_clock_tune_cpu_trimmers_low(void);
void tegra114_clock_tune_cpu_trimmers_init(void);
Code Review / kvmfornfv.git / blobdiff