X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?p=kvmfornfv.git;a=blobdiff_plain;f=kernel%2Fdrivers%2Fclk%2Ftegra%2Fclk.h;h=5d2678914160195f56ac2d45ee5ef773d62ca517;hp=d6ac00647fafb05311b646f208f7175fa0e618a4;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hpb=f93b97fd65072de626c074dbe099a1fff05ce060 diff --git a/kernel/drivers/clk/tegra/clk.h b/kernel/drivers/clk/tegra/clk.h index d6ac00647..5d2678914 100644 --- a/kernel/drivers/clk/tegra/clk.h +++ b/kernel/drivers/clk/tegra/clk.h @@ -157,7 +157,7 @@ struct div_nmp { }; /** - * struct clk_pll_params - PLL parameters + * struct tegra_clk_pll_params - PLL parameters * * @input_min: Minimum input frequency * @input_max: Maximum input frequency @@ -168,9 +168,45 @@ struct div_nmp { * @base_reg: PLL base reg offset * @misc_reg: PLL misc reg offset * @lock_reg: PLL lock reg offset - * @lock_bit_idx: Bit index for PLL lock status + * @lock_mask: Bitmask for PLL lock status * @lock_enable_bit_idx: Bit index to enable PLL lock + * @iddq_reg: PLL IDDQ register offset + * @iddq_bit_idx: Bit index to enable PLL IDDQ + * @aux_reg: AUX register offset + * @dyn_ramp_reg: Dynamic ramp control register offset + * @ext_misc_reg: Miscellaneous control register offsets + * @pmc_divnm_reg: n, m divider PMC override register offset (PLLM) + * @pmc_divp_reg: p divider PMC override register offset (PLLM) + * @flags: PLL flags + * @stepa_shift: Dynamic ramp step A field shift + * @stepb_shift: Dynamic ramp step B field shift * @lock_delay: Delay in us if PLL lock is not used + * @max_p: maximum value for the p divider + * @pdiv_tohw: mapping of p divider to register values + * @div_nmp: offsets and widths on n, m and p fields + * @freq_table: array of frequencies supported by PLL + * @fixed_rate: PLL rate if it is fixed + * + * Flags: + * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for + * PLL locking. If not set it will use lock_delay value to wait. + * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs + * to be programmed to change output frequency of the PLL. + * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated + * that it is PLLU and invert post divider value. + * TEGRA_PLLM - PLLM has additional override settings in PMC. This + * flag indicates that it is PLLM and use override settings. + * TEGRA_PLL_FIXED - We are not supposed to change output frequency + * of some plls. + * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. + * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the + * base register. + * TEGRA_PLL_BYPASS - PLL has bypass bit + * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring */ struct tegra_clk_pll_params { unsigned long input_min; @@ -203,38 +239,26 @@ struct tegra_clk_pll_params { unsigned long fixed_rate; }; +#define TEGRA_PLL_USE_LOCK BIT(0) +#define TEGRA_PLL_HAS_CPCON BIT(1) +#define TEGRA_PLL_SET_LFCON BIT(2) +#define TEGRA_PLL_SET_DCCON BIT(3) +#define TEGRA_PLLU BIT(4) +#define TEGRA_PLLM BIT(5) +#define TEGRA_PLL_FIXED BIT(6) +#define TEGRA_PLLE_CONFIGURE BIT(7) +#define TEGRA_PLL_LOCK_MISC BIT(8) +#define TEGRA_PLL_BYPASS BIT(9) +#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10) + /** * struct tegra_clk_pll - Tegra PLL clock * * @hw: handle between common and hardware-specifix interfaces * @clk_base: address of CAR controller * @pmc: address of PMC, required to read override bits - * @freq_table: array of frequencies supported by PLL - * @params: PLL parameters - * @flags: PLL flags - * @fixed_rate: PLL rate if it is fixed * @lock: register lock - * - * Flags: - * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for - * PLL locking. If not set it will use lock_delay value to wait. - * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs - * to be programmed to change output frequency of the PLL. - * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs - * to be programmed to change output frequency of the PLL. - * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs - * to be programmed to change output frequency of the PLL. - * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated - * that it is PLLU and invert post divider value. - * TEGRA_PLLM - PLLM has additional override settings in PMC. This - * flag indicates that it is PLLM and use override settings. - * TEGRA_PLL_FIXED - We are not supposed to change output frequency - * of some plls. - * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling. - * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the - * base register. - * TEGRA_PLL_BYPASS - PLL has bypass bit - * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring + * @params: PLL parameters */ struct tegra_clk_pll { struct clk_hw hw; @@ -246,17 +270,20 @@ struct tegra_clk_pll { #define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw) -#define TEGRA_PLL_USE_LOCK BIT(0) -#define TEGRA_PLL_HAS_CPCON BIT(1) -#define TEGRA_PLL_SET_LFCON BIT(2) -#define TEGRA_PLL_SET_DCCON BIT(3) -#define TEGRA_PLLU BIT(4) -#define TEGRA_PLLM BIT(5) -#define TEGRA_PLL_FIXED BIT(6) -#define TEGRA_PLLE_CONFIGURE BIT(7) -#define TEGRA_PLL_LOCK_MISC BIT(8) -#define TEGRA_PLL_BYPASS BIT(9) -#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10) +/** + * struct tegra_audio_clk_info - Tegra Audio Clk Information + * + * @name: name for the audio pll + * @pll_params: pll_params for audio pll + * @clk_id: clk_ids for the audio pll + * @parent: name of the parent of the audio pll + */ +struct tegra_audio_clk_info { + char *name; + struct tegra_clk_pll_params *pll_params; + int clk_id; + char *parent; +}; extern const struct clk_ops tegra_clk_pll_ops; extern const struct clk_ops tegra_clk_plle_ops; @@ -591,6 +618,9 @@ struct tegra_devclk { char *con_id; }; +void tegra_init_special_resets(unsigned int num, int (*assert)(unsigned long), + int (*deassert)(unsigned long)); + void tegra_init_from_table(struct tegra_clk_init_table *tbl, struct clk *clks[], int clk_max); @@ -607,7 +637,8 @@ void tegra_register_devclks(struct tegra_devclk *dev_clks, int num); void tegra_audio_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, - struct tegra_clk_pll_params *pll_params); + struct tegra_audio_clk_info *audio_info, + unsigned int num_plls); void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, @@ -623,6 +654,18 @@ void tegra_super_clk_gen4_init(void __iomem *clk_base, void __iomem *pmc_base, struct tegra_clk *tegra_clks, struct tegra_clk_pll_params *pll_params); +#ifdef CONFIG_TEGRA_CLK_EMC +struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np, + spinlock_t *lock); +#else +static inline struct clk *tegra_clk_register_emc(void __iomem *base, + struct device_node *np, + spinlock_t *lock) +{ + return NULL; +} +#endif + void tegra114_clock_tune_cpu_trimmers_high(void); void tegra114_clock_tune_cpu_trimmers_low(void); void tegra114_clock_tune_cpu_trimmers_init(void);