These changes are the raw update to qemu-2.6.
[kvmfornfv.git] / qemu / tests / i440fx-test.c
1 /*
2  * qtest I440FX test case
3  *
4  * Copyright IBM, Corp. 2012-2013
5  * Copyright Red Hat, Inc. 2013
6  *
7  * Authors:
8  *  Anthony Liguori   <aliguori@us.ibm.com>
9  *  Laszlo Ersek      <lersek@redhat.com>
10  *
11  * This work is licensed under the terms of the GNU GPL, version 2 or later.
12  * See the COPYING file in the top-level directory.
13  */
14
15 #include "qemu/osdep.h"
16 #include <glib.h>
17 #include <sys/mman.h>
18
19 #include "libqtest.h"
20 #include "libqos/pci.h"
21 #include "libqos/pci-pc.h"
22 #include "hw/pci/pci_regs.h"
23
24 #define BROKEN 1
25
26 typedef struct TestData
27 {
28     int num_cpus;
29 } TestData;
30
31 typedef struct FirmwareTestFixture {
32     /* decides whether we're testing -bios or -pflash */
33     bool is_bios;
34 } FirmwareTestFixture;
35
36 static QPCIBus *test_start_get_bus(const TestData *s)
37 {
38     char *cmdline;
39
40     cmdline = g_strdup_printf("-smp %d", s->num_cpus);
41     qtest_start(cmdline);
42     g_free(cmdline);
43     return qpci_init_pc();
44 }
45
46 static void test_i440fx_defaults(gconstpointer opaque)
47 {
48     const TestData *s = opaque;
49     QPCIBus *bus;
50     QPCIDevice *dev;
51     uint32_t value;
52
53     bus = test_start_get_bus(s);
54     dev = qpci_device_find(bus, QPCI_DEVFN(0, 0));
55     g_assert(dev != NULL);
56
57     /* 3.2.2 */
58     g_assert_cmpint(qpci_config_readw(dev, PCI_VENDOR_ID), ==, 0x8086);
59     /* 3.2.3 */
60     g_assert_cmpint(qpci_config_readw(dev, PCI_DEVICE_ID), ==, 0x1237);
61 #ifndef BROKEN
62     /* 3.2.4 */
63     g_assert_cmpint(qpci_config_readw(dev, PCI_COMMAND), ==, 0x0006);
64     /* 3.2.5 */
65     g_assert_cmpint(qpci_config_readw(dev, PCI_STATUS), ==, 0x0280);
66 #endif
67     /* 3.2.7 */
68     g_assert_cmpint(qpci_config_readb(dev, PCI_CLASS_PROG), ==, 0x00);
69     g_assert_cmpint(qpci_config_readw(dev, PCI_CLASS_DEVICE), ==, 0x0600);
70     /* 3.2.8 */
71     g_assert_cmpint(qpci_config_readb(dev, PCI_LATENCY_TIMER), ==, 0x00);
72     /* 3.2.9 */
73     g_assert_cmpint(qpci_config_readb(dev, PCI_HEADER_TYPE), ==, 0x00);
74     /* 3.2.10 */
75     g_assert_cmpint(qpci_config_readb(dev, PCI_BIST), ==, 0x00);
76
77     /* 3.2.11 */
78     value = qpci_config_readw(dev, 0x50); /* PMCCFG */
79     if (s->num_cpus == 1) { /* WPE */
80         g_assert(!(value & (1 << 15)));
81     } else {
82         g_assert((value & (1 << 15)));
83     }
84
85     g_assert(!(value & (1 << 6))); /* EPTE */
86
87     /* 3.2.12 */
88     g_assert_cmpint(qpci_config_readb(dev, 0x52), ==, 0x00); /* DETURBO */
89     /* 3.2.13 */
90 #ifndef BROKEN
91     g_assert_cmpint(qpci_config_readb(dev, 0x53), ==, 0x80); /* DBC */
92 #endif
93     /* 3.2.14 */
94     g_assert_cmpint(qpci_config_readb(dev, 0x54), ==, 0x00); /* AXC */
95     /* 3.2.15 */
96     g_assert_cmpint(qpci_config_readw(dev, 0x55), ==, 0x0000); /* DRT */
97 #ifndef BROKEN
98     /* 3.2.16 */
99     g_assert_cmpint(qpci_config_readb(dev, 0x57), ==, 0x01); /* DRAMC */
100     /* 3.2.17 */
101     g_assert_cmpint(qpci_config_readb(dev, 0x58), ==, 0x10); /* DRAMT */
102 #endif
103     /* 3.2.18 */
104     g_assert_cmpint(qpci_config_readb(dev, 0x59), ==, 0x00); /* PAM0 */
105     g_assert_cmpint(qpci_config_readb(dev, 0x5A), ==, 0x00); /* PAM1 */
106     g_assert_cmpint(qpci_config_readb(dev, 0x5B), ==, 0x00); /* PAM2 */
107     g_assert_cmpint(qpci_config_readb(dev, 0x5C), ==, 0x00); /* PAM3 */
108     g_assert_cmpint(qpci_config_readb(dev, 0x5D), ==, 0x00); /* PAM4 */
109     g_assert_cmpint(qpci_config_readb(dev, 0x5E), ==, 0x00); /* PAM5 */
110     g_assert_cmpint(qpci_config_readb(dev, 0x5F), ==, 0x00); /* PAM6 */
111 #ifndef BROKEN
112     /* 3.2.19 */
113     g_assert_cmpint(qpci_config_readb(dev, 0x60), ==, 0x01); /* DRB0 */
114     g_assert_cmpint(qpci_config_readb(dev, 0x61), ==, 0x01); /* DRB1 */
115     g_assert_cmpint(qpci_config_readb(dev, 0x62), ==, 0x01); /* DRB2 */
116     g_assert_cmpint(qpci_config_readb(dev, 0x63), ==, 0x01); /* DRB3 */
117     g_assert_cmpint(qpci_config_readb(dev, 0x64), ==, 0x01); /* DRB4 */
118     g_assert_cmpint(qpci_config_readb(dev, 0x65), ==, 0x01); /* DRB5 */
119     g_assert_cmpint(qpci_config_readb(dev, 0x66), ==, 0x01); /* DRB6 */
120     g_assert_cmpint(qpci_config_readb(dev, 0x67), ==, 0x01); /* DRB7 */
121 #endif
122     /* 3.2.20 */
123     g_assert_cmpint(qpci_config_readb(dev, 0x68), ==, 0x00); /* FDHC */
124     /* 3.2.21 */
125     g_assert_cmpint(qpci_config_readb(dev, 0x70), ==, 0x00); /* MTT */
126 #ifndef BROKEN
127     /* 3.2.22 */
128     g_assert_cmpint(qpci_config_readb(dev, 0x71), ==, 0x10); /* CLT */
129 #endif
130     /* 3.2.23 */
131     g_assert_cmpint(qpci_config_readb(dev, 0x72), ==, 0x02); /* SMRAM */
132     /* 3.2.24 */
133     g_assert_cmpint(qpci_config_readb(dev, 0x90), ==, 0x00); /* ERRCMD */
134     /* 3.2.25 */
135     g_assert_cmpint(qpci_config_readb(dev, 0x91), ==, 0x00); /* ERRSTS */
136     /* 3.2.26 */
137     g_assert_cmpint(qpci_config_readb(dev, 0x93), ==, 0x00); /* TRC */
138
139     qtest_end();
140 }
141
142 #define PAM_RE 1
143 #define PAM_WE 2
144
145 static void pam_set(QPCIDevice *dev, int index, int flags)
146 {
147     int regno = 0x59 + (index / 2);
148     uint8_t reg;
149
150     reg = qpci_config_readb(dev, regno);
151     if (index & 1) {
152         reg = (reg & 0x0F) | (flags << 4);
153     } else {
154         reg = (reg & 0xF0) | flags;
155     }
156     qpci_config_writeb(dev, regno, reg);
157 }
158
159 static gboolean verify_area(uint32_t start, uint32_t end, uint8_t value)
160 {
161     uint32_t size = end - start + 1;
162     gboolean ret = TRUE;
163     uint8_t *data;
164     int i;
165
166     data = g_malloc0(size);
167     memread(start, data, size);
168
169     g_test_message("verify_area: data[0] = 0x%x", data[0]);
170
171     for (i = 0; i < size; i++) {
172         if (data[i] != value) {
173             ret = FALSE;
174             break;
175         }
176     }
177
178     g_free(data);
179
180     return ret;
181 }
182
183 static void write_area(uint32_t start, uint32_t end, uint8_t value)
184 {
185     uint32_t size = end - start + 1;
186     uint8_t *data;
187
188     data = g_malloc(size);
189     memset(data, value, size);
190     memwrite(start, data, size);
191
192     g_free(data);
193 }
194
195 static void test_i440fx_pam(gconstpointer opaque)
196 {
197     const TestData *s = opaque;
198     QPCIBus *bus;
199     QPCIDevice *dev;
200     int i;
201     static struct {
202         uint32_t start;
203         uint32_t end;
204     } pam_area[] = {
205         { 0, 0 },             /* Reserved */
206         { 0xF0000, 0xFFFFF }, /* BIOS Area */
207         { 0xC0000, 0xC3FFF }, /* Option ROM */
208         { 0xC4000, 0xC7FFF }, /* Option ROM */
209         { 0xC8000, 0xCBFFF }, /* Option ROM */
210         { 0xCC000, 0xCFFFF }, /* Option ROM */
211         { 0xD0000, 0xD3FFF }, /* Option ROM */
212         { 0xD4000, 0xD7FFF }, /* Option ROM */
213         { 0xD8000, 0xDBFFF }, /* Option ROM */
214         { 0xDC000, 0xDFFFF }, /* Option ROM */
215         { 0xE0000, 0xE3FFF }, /* BIOS Extension */
216         { 0xE4000, 0xE7FFF }, /* BIOS Extension */
217         { 0xE8000, 0xEBFFF }, /* BIOS Extension */
218         { 0xEC000, 0xEFFFF }, /* BIOS Extension */
219     };
220
221     bus = test_start_get_bus(s);
222     dev = qpci_device_find(bus, QPCI_DEVFN(0, 0));
223     g_assert(dev != NULL);
224
225     for (i = 0; i < ARRAY_SIZE(pam_area); i++) {
226         if (pam_area[i].start == pam_area[i].end) {
227             continue;
228         }
229
230         g_test_message("Checking area 0x%05x..0x%05x",
231                        pam_area[i].start, pam_area[i].end);
232         /* Switch to RE for the area */
233         pam_set(dev, i, PAM_RE);
234         /* Verify the RAM is all zeros */
235         g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0));
236
237         /* Switch to WE for the area */
238         pam_set(dev, i, PAM_RE | PAM_WE);
239         /* Write out a non-zero mask to the full area */
240         write_area(pam_area[i].start, pam_area[i].end, 0x42);
241
242 #ifndef BROKEN
243         /* QEMU only supports a limited form of PAM */
244
245         /* Switch to !RE for the area */
246         pam_set(dev, i, PAM_WE);
247         /* Verify the area is not our mask */
248         g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x42));
249 #endif
250
251         /* Verify the area is our new mask */
252         g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0x42));
253
254         /* Write out a new mask */
255         write_area(pam_area[i].start, pam_area[i].end, 0x82);
256
257 #ifndef BROKEN
258         /* QEMU only supports a limited form of PAM */
259
260         /* Verify the area is not our mask */
261         g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x82));
262
263         /* Switch to RE for the area */
264         pam_set(dev, i, PAM_RE | PAM_WE);
265 #endif
266         /* Verify the area is our new mask */
267         g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0x82));
268
269         /* Reset area */
270         pam_set(dev, i, 0);
271
272         /* Verify the area is not our new mask */
273         g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x82));
274     }
275     qtest_end();
276 }
277
278 #define BLOB_SIZE ((size_t)65536)
279 #define ISA_BIOS_MAXSZ ((size_t)(128 * 1024))
280
281 /* Create a blob file, and return its absolute pathname as a dynamically
282  * allocated string.
283  * The file is closed before the function returns.
284  * In case of error, NULL is returned. The function prints the error message.
285  */
286 static char *create_blob_file(void)
287 {
288     int ret, fd;
289     char *pathname;
290     GError *error = NULL;
291
292     ret = -1;
293     fd = g_file_open_tmp("blob_XXXXXX", &pathname, &error);
294     if (fd == -1) {
295         fprintf(stderr, "unable to create blob file: %s\n", error->message);
296         g_error_free(error);
297     } else {
298         if (ftruncate(fd, BLOB_SIZE) == -1) {
299             fprintf(stderr, "ftruncate(\"%s\", %zu): %s\n", pathname,
300                     BLOB_SIZE, strerror(errno));
301         } else {
302             void *buf;
303
304             buf = mmap(NULL, BLOB_SIZE, PROT_WRITE, MAP_SHARED, fd, 0);
305             if (buf == MAP_FAILED) {
306                 fprintf(stderr, "mmap(\"%s\", %zu): %s\n", pathname, BLOB_SIZE,
307                         strerror(errno));
308             } else {
309                 size_t i;
310
311                 for (i = 0; i < BLOB_SIZE; ++i) {
312                     ((uint8_t *)buf)[i] = i;
313                 }
314                 munmap(buf, BLOB_SIZE);
315                 ret = 0;
316             }
317         }
318         close(fd);
319         if (ret == -1) {
320             unlink(pathname);
321             g_free(pathname);
322         }
323     }
324
325     return ret == -1 ? NULL : pathname;
326 }
327
328 static void test_i440fx_firmware(FirmwareTestFixture *fixture,
329                                  gconstpointer user_data)
330 {
331     char *fw_pathname, *cmdline;
332     uint8_t *buf;
333     size_t i, isa_bios_size;
334
335     fw_pathname = create_blob_file();
336     g_assert(fw_pathname != NULL);
337
338     /* Better hope the user didn't put metacharacters in TMPDIR and co. */
339     cmdline = g_strdup_printf("-S %s%s", fixture->is_bios
340                                          ? "-bios "
341                                          : "-drive if=pflash,format=raw,file=",
342                               fw_pathname);
343     g_test_message("qemu cmdline: %s", cmdline);
344     qtest_start(cmdline);
345     g_free(cmdline);
346
347     /* QEMU has loaded the firmware (because qtest_start() only returns after
348      * the QMP handshake completes). We must unlink the firmware blob right
349      * here, because any assertion firing below would leak it in the
350      * filesystem. This is also the reason why we recreate the blob every time
351      * this function is invoked.
352      */
353     unlink(fw_pathname);
354     g_free(fw_pathname);
355
356     /* check below 4G */
357     buf = g_malloc0(BLOB_SIZE);
358     memread(0x100000000ULL - BLOB_SIZE, buf, BLOB_SIZE);
359     for (i = 0; i < BLOB_SIZE; ++i) {
360         g_assert_cmphex(buf[i], ==, (uint8_t)i);
361     }
362
363     /* check in ISA space too */
364     memset(buf, 0, BLOB_SIZE);
365     isa_bios_size = ISA_BIOS_MAXSZ < BLOB_SIZE ? ISA_BIOS_MAXSZ : BLOB_SIZE;
366     memread(0x100000 - isa_bios_size, buf, isa_bios_size);
367     for (i = 0; i < isa_bios_size; ++i) {
368         g_assert_cmphex(buf[i], ==,
369                         (uint8_t)((BLOB_SIZE - isa_bios_size) + i));
370     }
371
372     g_free(buf);
373     qtest_end();
374 }
375
376 static void add_firmware_test(const char *testpath,
377                               void (*setup_fixture)(FirmwareTestFixture *f,
378                                                     gconstpointer test_data))
379 {
380     qtest_add(testpath, FirmwareTestFixture, NULL, setup_fixture,
381               test_i440fx_firmware, NULL);
382 }
383
384 static void request_bios(FirmwareTestFixture *fixture,
385                          gconstpointer user_data)
386 {
387     fixture->is_bios = true;
388 }
389
390 static void request_pflash(FirmwareTestFixture *fixture,
391                            gconstpointer user_data)
392 {
393     fixture->is_bios = false;
394 }
395
396 int main(int argc, char **argv)
397 {
398     TestData data;
399     int ret;
400
401     g_test_init(&argc, &argv, NULL);
402
403     data.num_cpus = 1;
404
405     qtest_add_data_func("i440fx/defaults", &data, test_i440fx_defaults);
406     qtest_add_data_func("i440fx/pam", &data, test_i440fx_pam);
407     add_firmware_test("i440fx/firmware/bios", request_bios);
408     add_firmware_test("i440fx/firmware/pflash", request_pflash);
409
410     ret = g_test_run();
411     return ret;
412 }