Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / drivers / usb / musb / davinci.h
1 /*
2  * TI's Davinci platform specific USB wrapper functions.
3  *
4  * Copyright (c) 2008 Texas Instruments
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  *
8  * Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
9  */
10
11 #ifndef __DAVINCI_USB_H__
12 #define __DAVINCI_USB_H__
13
14 #include <asm/arch/hardware.h>
15 #include "musb_core.h"
16
17 /* Base address of DAVINCI usb0 wrapper */
18 #define DAVINCI_USB0_BASE 0x01C64000
19
20 /* Base address of DAVINCI musb core */
21 #define MENTOR_USB0_BASE (DAVINCI_USB0_BASE+0x400)
22
23 /*
24  * Davinci platform USB wrapper register overlay. Note: Only the required
25  * registers are included in this structure. It can be expanded as required.
26  */
27 struct davinci_usb_regs {
28         u32     version;
29         u32     ctrlr;
30         u32     reserved[0x20];
31         u32     intclrr;
32         u32     intmskr;
33         u32     intmsksetr;
34 };
35
36 #define DAVINCI_USB_TX_ENDPTS_MASK      0x1f /* ep0 + 4 tx */
37 #define DAVINCI_USB_RX_ENDPTS_MASK      0x1e /* 4 rx */
38 #define DAVINCI_USB_USBINT_SHIFT        16
39 #define DAVINCI_USB_TXINT_SHIFT         0
40 #define DAVINCI_USB_RXINT_SHIFT         8
41 #define DAVINCI_INTR_DRVVBUS            0x0100
42
43 #define DAVINCI_USB_USBINT_MASK         0x01ff0000      /* 8 Mentor, DRVVBUS */
44 #define DAVINCI_USB_TXINT_MASK \
45                 (DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
46 #define DAVINCI_USB_RXINT_MASK \
47                 (DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
48 #define MGC_BUSCTL_OFFSET(_bEnd, _bOffset) \
49                 (0x80 + (8*(_bEnd)) + (_bOffset))
50
51 /* Integrated highspeed/otg PHY */
52 #define USBPHY_CTL_PADDR        (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
53 #define USBPHY_PHY24MHZ         (1 << 13)
54 #define USBPHY_PHYCLKGD         (1 << 8)
55 #define USBPHY_SESNDEN          (1 << 7)        /* v(sess_end) comparator */
56 #define USBPHY_VBDTCTEN         (1 << 6)        /* v(bus) comparator */
57 #define USBPHY_PHYPLLON         (1 << 4)        /* override pll suspend */
58 #define USBPHY_CLKO1SEL         (1 << 3)
59 #define USBPHY_OSCPDWN          (1 << 2)
60 #define USBPHY_PHYPDWN          (1 << 0)
61
62 /* Timeout for Davinci USB module */
63 #define DAVINCI_USB_TIMEOUT 0x3FFFFFF
64
65 /* IO Expander I2C address and VBUS enable mask */
66 #define IOEXP_I2C_ADDR 0x3A
67 #define IOEXP_VBUSEN_MASK 1
68
69 /* extern functions */
70 extern void lpsc_on(unsigned int id);
71 extern int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
72 extern int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
73 extern void enable_vbus(void);
74 #endif  /* __DAVINCI_USB_H__ */