Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / renesas / rsk7203 / rsk7203.c
1 /*
2  * Copyright (C) 2008 Nobuhiro Iwamatsu
3  * Copyright (C) 2008 Renesas Solutions Corp.
4  *
5  * u-boot/board/rsk7203/rsk7203.c
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #include <common.h>
11 #include <net.h>
12 #include <netdev.h>
13 #include <asm/io.h>
14 #include <asm/processor.h>
15
16 DECLARE_GLOBAL_DATA_PTR;
17
18 int checkboard(void)
19 {
20         puts("BOARD: Renesas Technology RSK7203\n");
21         return 0;
22 }
23
24 int board_init(void)
25 {
26         return 0;
27 }
28
29 int dram_init(void)
30 {
31         gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
32         gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
33         printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
34         return 0;
35 }
36
37 void led_set_state(unsigned short value)
38 {
39 }
40
41 /*
42  * The RSK board has the SMSC9118 wired up 'incorrectly'.
43  * Byte-swapping is necessary, and so poor performance is inevitable.
44  * This problem cannot evade by the swap function of CHIP, this can
45  * evade by software Byte-swapping.
46  * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
47  * functions necessary to solve this problem.
48  */
49 u32 pkt_data_pull(struct eth_device *dev, u32 addr)
50 {
51         volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
52         return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
53                                 | swab16(*(addr_16 + 1));
54 }
55
56 void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
57 {
58         addr += dev->iobase;
59         *(volatile u16 *)(addr + 2) = swab16((u16)val);
60         *(volatile u16 *)(addr) = swab16((u16)(val >> 16));
61 }
62
63 int board_eth_init(bd_t *bis)
64 {
65         int rc = 0;
66 #ifdef CONFIG_SMC911X
67         rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
68 #endif
69         return rc;
70 }