Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / mpl / pati / pci_eeprom.h
1 #ifndef __PCI_EEPROM_H_
2 #define __PCI_EEPROM_H_ 1
3
4 #include "pati.h"
5 /******************************************************************************
6  * Eeprom Support
7  ******************************************************************************/
8 /**********************************************
9 *               Definitions
10 **********************************************/
11 #define EE46_CMD_LEN    9       /* Bits in instructions */
12 #define EE56_CMD_LEN    11      /* Bits in instructions */
13 #define EE66_CMD_LEN    11      /* Bits in instructions */
14 #define EE_READ         0x0180  /* 01 1000 0000 read instruction */
15 #define EE_WRITE        0x0140  /* 01 0100 0000 write instruction */
16 #define EE_WREN         0x0130  /* 01 0011 0000 write enable instruction */
17 #define EE_WRALL        0x0110  /* 01 0001 0000 write all registers */
18 #define EE_PRREAD       0x0180  /* 01 1000 0000 read address stored in Protect Register */
19 #define EE_PRWRITE      0x0140  /* 01 0100 0000 write the address into PR */
20 #define EE_WDS          0x0100  /* 01 0000 0000 write disable instruction */
21 #define EE_PREN         0x0130  /* 01 0011 0000 protect enable instruction */
22 #define EE_PRCLEAR      0x01FF  /* 01 1111 1111 clear protect register instr */
23 #define EE_PRDS         0x0100  /* 01 0000 0000 ONE TIME ONLY, permenant */
24
25 /***************************************************
26  * EEPROM
27  ***************************************************/
28 #define LOW_WORD(x)     (((x) & 0xFFFF))
29 #define HIGH_WORD(x)    (((x) >> 16) & 0xFFFF)
30
31 typedef struct pci_eeprom_t {
32         unsigned short offset;
33         unsigned short value;
34 } pci_eeprom;
35
36 static pci_eeprom pati_eeprom[] = {
37         { 0x00,PCI_DEVICE_ID_PATI },    /* PCI Device ID PCIIDR[31:16] */
38         { 0x02,PCI_VENDOR_ID_MPL },     /* PCI Vendor ID PCIIDR[15:0] */
39         { 0x04,PCI_CLASS_PROCESSOR_POWERPC },   /* PCI Class Code PCICCR[23:8] */
40         { 0x06,0x00BA },        /* PCI Class Code / PCI Revision ID PCICCR[7:0] / PCIREV[7:0] */
41         { 0x08,0x0007 },        /* PCI Maximum Latency / PCI Minimum Grant PCIMLR[7:0] / PCIMGR[7:0] */
42         { 0x0A,0x0100 },        /* PCI Interrupt Pin / PCI Interrupt Line PCIIPR[7:0] / PCIILR[7:0] */
43         { 0x0C,0x0000 },        /* MSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[31:16] */
44         { 0x0E,0x0000 },        /* LSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[15:0] */
45         { 0x10,0x0000 },        /* MSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[31:16] */
46         { 0x12,0x0000 },        /* LSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[15:0] */
47         { 0x14,HIGH_WORD(PATI_LOC_CFG_MASK) },  /* MSW of Direct Slave Local Address Space 0 Range LAS0RR[31:16] */
48         { 0x16,LOW_WORD(PATI_LOC_CFG_MASK) },   /* LSW of Direct Slave Local Address Space 0 Range LAS0RR[15:0] */
49         { 0x18,HIGH_WORD(PATI_LOC_CFG_ADDR) },  /* MSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[31:16] (CFG) */
50         { 0x1A,LOW_WORD(PATI_LOC_CFG_ADDR)|1 }, /* LSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[15:2, 0], Reserved [1] */
51         { 0x1C,0x0000 },        /* MSW of Mode/DMA Arbitration MARBR[31, 29:16] or DMAARB[31, 29:16], Reserved [30] */
52         { 0x1E,0x0000 },        /* LSW of Mode/DMA Arbitration MARBR[15:0] or DMAARB[15:0] */
53         { 0x20,0x0030 },        /* Local Miscellaneous Control 2 / Serial EEPROM WP Addr Boundary LMISC2[5:0], Res[7:6] / PROT_AREA[6:0], Res[7] */
54         { 0x22,0x0510 },        /* Local Miscellaneous Control 1 / Local Bus Big/Little Endian Descriptor LMISC1[7:0] / BIGEND[7:0] */
55         { 0x24,0x0000 },        /* MSW of Direct Slave Expansion ROM Range EROMRR[31:16] */
56         { 0x26,0x0000 },        /* LSW of Direct Slave Expansion ROM Range EROMRR[15:11, 0], Reserved [10:1]  */
57         { 0x28,0x0000 },        /* MSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[31:16] */
58         { 0x2A,0x0000 },        /* LSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[15:11, 5:0], Reserved [10:6] */
59         { 0x2C,(0x4243 | HIGH_WORD((PATI_LOC_CFG_SPACE0_ATTR))) },      /* MSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[31:16] */
60         { 0x2E,LOW_WORD(PATI_LOC_CFG_SPACE0_ATTR) },    /* LSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[15:0] */
61         { 0x30,HIGH_WORD(PATI_DMASTER_MASK) },  /* MSW of Local Range for Direct Master-to-PCI DMRR[31:16] */
62         { 0x32,LOW_WORD(PATI_DMASTER_MASK) },   /* LSW of Local Range for Direct Master-to-PCI (Reserved) DMRR[15:0] */
63         { 0x34,HIGH_WORD(PATI_DMASTER_ADDR) },  /* MSW of Local Base Address for Direct Master-to-PCI Memory DMLBAM[31:16] */
64         { 0x36,LOW_WORD(PATI_DMASTER_ADDR) },   /* LSW of Local Base Address for Direct Master-to-PCI Memory (Reserved) DMLBAM[15:0] */
65         { 0x38,0x0000 },        /* MSW of Local Bus Address for Direct Master-to-PCI I/O Configuration DMLBAI[31:16] */
66         { 0x3A,0x0000 },        /* LSW of Local Bus Address for Direct Master-to-PCI I/O Configuration (Reserved) DMLBAI[15:0] */
67         { 0x3C,0x0000 },        /* MSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[31:16] */
68         { 0x3E,0x0000 },        /* LSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[15:0] */
69         { 0x40,0x0000 },        /* MSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[31, 23:16] Reserved [30:24]*/
70         { 0x42,0x0000 },        /* LSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[15:0] */
71         { 0x44,0x0000 },        /* PCI Subsystem ID PCISID[15:0] */
72         { 0x46,0x0000 },        /* PCI Subsystem Vendor ID PCISVID[15:0] */
73         { 0x48,HIGH_WORD(PATI_LOC_SDRAM_MASK) },        /* MSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[31:16] */
74         { 0x4A,LOW_WORD(PATI_LOC_SDRAM_MASK) }, /* LSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[15:0] */
75         { 0x4C,HIGH_WORD(PATI_LOC_SDRAM_ADDR) },        /* MSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[31:16] (SDRAM) */
76         { 0x4E,LOW_WORD(PATI_LOC_SDRAM_ADDR) | 0x1 },   /* LSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[15:2, 0], Reserved [1] */
77         { 0x50,HIGH_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, /* MSW of Local Address Space 1 Bus Region Descriptor LBRD1[31:16] */
78         { 0x52,LOW_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) },  /* LSW of Local Address Space 1 Bus Region Descriptor (Reserved) LBRD1[15:0] */
79         { 0x54,0x0000 },        /* Hot Swap Control/Status (Reserved) Reserved */
80         { 0x56,0x0000 },        /* Hot Swap Next Capability Pointer / Hot Swap Control HS_NEXT[7:0] / HS_CNTL[7:0] */
81         { 0x58,0x0000 },        /* Reserved Reserved */
82         { 0x5A,0x0000 },        /* PCI Arbiter Control PCIARB[3:0], Reserved [15:4] */
83         { 0x5C,0x0000 },        /* Power Management Capabilities PMC[15:9, 2:0] */
84         { 0x5E,0x0000 },        /* Power Management Next Capability Pointer (Reserved) / Power Management Capability ID (Reserved) Reserved*/
85         { 0x60,0x0000 },        /* Power Management Data / PMCSR Bridge Support Extension (Reserved) PMDATA[7:0] / Reserved */
86         { 0x62,0x0000 },        /* Power Management Control/Status PMCSR[14:8] */
87         { 0xFFFF,0xFFFF}        /* terminaror */
88 };
89 #define PATI_EEPROM_LAST_OFFSET 0x64
90 #endif /* #ifndef __PCI_EEPROM_H_ */