Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / freescale / common / ngpixis.h
1 /**
2  * Copyright 2010-2011 Freescale Semiconductor
3  * Author: Timur Tabi <timur@freescale.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  *
7  * This file provides support for the ngPIXIS, a board-specific FPGA used on
8  * some Freescale reference boards.
9  */
10
11 /* ngPIXIS register set. Hopefully, this won't change too much over time.
12  * Feel free to add board-specific #ifdefs where necessary.
13  */
14 typedef struct ngpixis {
15         u8 id;
16         u8 arch;
17         u8 scver;
18         u8 csr;
19         u8 rst;
20         u8 serclk;
21         u8 aux;
22         u8 spd;
23         u8 brdcfg0;
24         u8 brdcfg1;     /* On some boards, this register is called 'dma' */
25         u8 addr;
26         u8 brdcfg2;
27         u8 gpiodir;
28         u8 data;
29         u8 led;
30         u8 tag;
31         u8 vctl;
32         u8 vstat;
33         u8 vcfgen0;
34         u8 res4;
35         u8 ocmcsr;
36         u8 ocmmsg;
37         u8 gmdbg;
38         u8 res5[2];
39         u8 sclk[3];
40         u8 dclk[3];
41         u8 watch;
42         struct {
43                 u8 sw;
44                 u8 en;
45         } s[9];         /* s[0]..s[7] is SW1..SW8, and s[8] is SW11 */
46 } __attribute__ ((packed)) ngpixis_t;
47
48 /* Pointer to the PIXIS register set */
49 #define pixis ((ngpixis_t *)PIXIS_BASE)
50
51 /* The PIXIS SW register that corresponds to board switch X, where x >= 1 */
52 #define PIXIS_SW(x)             (pixis->s[(x) - 1].sw)
53
54 /* The PIXIS EN register that corresponds to board switch X, where x >= 1 */
55 #define PIXIS_EN(x)             (pixis->s[(x) - 1].en)
56
57 u8 pixis_read(unsigned int reg);
58 void pixis_write(unsigned int reg, u8 value);
59
60 #define PIXIS_READ(reg) pixis_read(offsetof(ngpixis_t, reg))
61 #define PIXIS_WRITE(reg, value) pixis_write(offsetof(ngpixis_t, reg), value)