Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / arch / arm / include / asm / arch-lpc32xx / config.h
1 /*
2  * Common definitions for LPC32XX board configurations
3  *
4  * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef _LPC32XX_CONFIG_H
10 #define _LPC32XX_CONFIG_H
11
12 /* Basic CPU architecture */
13 #define CONFIG_ARM926EJS
14 #define CONFIG_ARCH_CPU_INIT
15
16 #define CONFIG_NR_DRAM_BANKS_MAX        2
17
18 /* UART configuration */
19 #if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
20 #define CONFIG_SYS_NS16550_SERIAL
21 #define CONFIG_CONS_INDEX               (CONFIG_SYS_LPC32XX_UART - 2)
22 #elif   (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2) || \
23         (CONFIG_SYS_LPC32XX_UART == 7)
24 #define CONFIG_LPC32XX_HSUART
25 #else
26 #error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
27 #endif
28
29 #if defined(CONFIG_SYS_NS16550_SERIAL)
30 #define CONFIG_SYS_NS16550
31
32 #define CONFIG_SYS_NS16550_REG_SIZE     -4
33 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
34
35 #define CONFIG_SYS_NS16550_COM1         UART3_BASE
36 #define CONFIG_SYS_NS16550_COM2         UART4_BASE
37 #define CONFIG_SYS_NS16550_COM3         UART5_BASE
38 #define CONFIG_SYS_NS16550_COM4         UART6_BASE
39 #endif
40
41 #if defined(CONFIG_LPC32XX_HSUART)
42 #if     CONFIG_SYS_LPC32XX_UART == 1
43 #define HS_UART_BASE                    HS_UART1_BASE
44 #elif   CONFIG_SYS_LPC32XX_UART == 2
45 #define HS_UART_BASE                    HS_UART2_BASE
46 #else   /* CONFIG_SYS_LPC32XX_UART == 7 */
47 #define HS_UART_BASE                    HS_UART7_BASE
48 #endif
49 #endif
50
51 #define CONFIG_SYS_BAUDRATE_TABLE       \
52                 { 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
53
54 /* NOR Flash */
55 #if defined(CONFIG_SYS_FLASH_CFI)
56 #define CONFIG_FLASH_CFI_DRIVER
57 #define CONFIG_SYS_FLASH_PROTECTION
58 #endif
59
60 #endif /* _LPC32XX_CONFIG_H */