qemu/roms/u-boot/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c

   1 /*
   2  * Memory setup for board based on EXYNOS4210
   3  *
   4  * Copyright (C) 2013 Samsung Electronics
   5  * Rajeshwari Shinde <rajeshwari.s@samsung.com>
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #include <config.h>
  27 #include <asm/arch/dmc.h>
  28 #include "common_setup.h"
  29 #include "exynos4_setup.h"
  30
  31 struct mem_timings mem = {
  32         .direct_cmd_msr = {
  33                 DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
  34         },
  35         .timingref = TIMINGREF_VAL,
  36         .timingrow = TIMINGROW_VAL,
  37         .timingdata = TIMINGDATA_VAL,
  38         .timingpower = TIMINGPOWER_VAL,
  39         .zqcontrol = ZQ_CONTROL_VAL,
  40         .control0 = CONTROL0_VAL,
  41         .control1 = CONTROL1_VAL,
  42         .control2 = CONTROL2_VAL,
  43         .concontrol = CONCONTROL_VAL,
  44         .prechconfig = PRECHCONFIG,
  45         .memcontrol = MEMCONTROL_VAL,
  46         .memconfig0 = MEMCONFIG0_VAL,
  47         .memconfig1 = MEMCONFIG1_VAL,
  48         .dll_resync = FORCE_DLL_RESYNC,
  49         .dll_on = DLL_CONTROL_ON,
  50 };
  51 static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
  52 {
  53         if (ctrl_no) {
  54                 writel((mem.control1 | (1 << mem.dll_resync)),
  55                        &dmc->phycontrol1);
  56                 writel((mem.control1 | (0 << mem.dll_resync)),
  57                        &dmc->phycontrol1);
  58         } else {
  59                 writel((mem.control0 | (0 << mem.dll_on)),
  60                        &dmc->phycontrol0);
  61                 writel((mem.control0 | (1 << mem.dll_on)),
  62                        &dmc->phycontrol0);
  63         }
  64 }
  65
  66 static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
  67 {
  68         int i;
  69         unsigned long mask = 0;
  70
  71         if (chip)
  72                 mask = DIRECT_CMD_CHIP1_SHIFT;
  73
  74         for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
  75                 writel(mem.direct_cmd_msr[i] | mask,
  76                        &dmc->directcmd);
  77         }
  78 }
  79
  80 static void dmc_init(struct exynos4_dmc *dmc)
  81 {
  82         /*
  83          * DLL Parameter Setting:
  84          * Termination: Enable R/W
  85          * Phase Delay for DQS Cleaning: 180' Shift
  86          */
  87         writel(mem.control1, &dmc->phycontrol1);
  88
  89         /*
  90          * ZQ Calibration
  91          * Termination: Disable
  92          * Auto Calibration Start: Enable
  93          */
  94         writel(mem.zqcontrol, &dmc->phyzqcontrol);
  95         sdelay(0x100000);
  96
  97         /*
  98          * Update DLL Information:
  99          * Force DLL Resyncronization
 100          */
 101         phy_control_reset(1, dmc);
 102         phy_control_reset(0, dmc);
 103
 104         /* Set DLL Parameters */
 105         writel(mem.control1, &dmc->phycontrol1);
 106
 107         /* DLL Start */
 108         writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
 109
 110         writel(mem.control2, &dmc->phycontrol2);
 111
 112         /* Set Clock Ratio of Bus clock to Memory Clock */
 113         writel(mem.concontrol, &dmc->concontrol);
 114
 115         /*
 116          * Memor Burst length: 8
 117          * Number of chips: 2
 118          * Memory Bus width: 32 bit
 119          * Memory Type: DDR3
 120          * Additional Latancy for PLL: 1 Cycle
 121          */
 122         writel(mem.memcontrol, &dmc->memcontrol);
 123
 124         writel(mem.memconfig0, &dmc->memconfig0);
 125         writel(mem.memconfig1, &dmc->memconfig1);
 126
 127         /* Config Precharge Policy */
 128         writel(mem.prechconfig, &dmc->prechconfig);
 129         /*
 130          * TimingAref, TimingRow, TimingData, TimingPower Setting:
 131          * Values as per Memory AC Parameters
 132          */
 133         writel(mem.timingref, &dmc->timingref);
 134         writel(mem.timingrow, &dmc->timingrow);
 135         writel(mem.timingdata, &dmc->timingdata);
 136         writel(mem.timingpower, &dmc->timingpower);
 137
 138         /* Chip0: NOP Command: Assert and Hold CKE to high level */
 139         writel(DIRECT_CMD_NOP, &dmc->directcmd);
 140         sdelay(0x100000);
 141
 142         /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
 143         dmc_config_mrs(dmc, 0);
 144         sdelay(0x100000);
 145
 146         /* Chip0: ZQINIT */
 147         writel(DIRECT_CMD_ZQ, &dmc->directcmd);
 148         sdelay(0x100000);
 149
 150         writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
 151         sdelay(0x100000);
 152
 153         /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
 154         dmc_config_mrs(dmc, 1);
 155         sdelay(0x100000);
 156
 157         /* Chip1: ZQINIT */
 158         writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
 159         sdelay(0x100000);
 160
 161         phy_control_reset(1, dmc);
 162         sdelay(0x100000);
 163
 164         /* turn on DREX0, DREX1 */
 165         writel((mem.concontrol | AREF_EN), &dmc->concontrol);
 166 }
 167
 168 void mem_ctrl_init(int reset)
 169 {
 170         struct exynos4_dmc *dmc;
 171
 172         /*
 173          * Async bridge configuration at CPU_core:
 174          * 1: half_sync
 175          * 0: full_sync
 176          */
 177         writel(1, ASYNC_CONFIG);
 178 #ifdef CONFIG_ORIGEN
 179         /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
 180         writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
 181                 APB_SFR_INTERLEAVE_CONF_OFFSET);
 182         /* Update MIU Configuration */
 183         writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
 184                 APB_SFR_ARBRITATION_CONF_OFFSET);
 185 #else
 186         writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
 187                 APB_SFR_INTERLEAVE_CONF_OFFSET);
 188         writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
 189                 ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
 190         writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
 191                 ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
 192         writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
 193                 ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
 194 #ifdef CONFIG_MIU_LINEAR
 195         writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
 196                 ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
 197         writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
 198                 ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
 199         writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
 200                 ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
 201         writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
 202                 ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
 203         writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
 204                 ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
 205 #endif
 206 #endif
 207         /* DREX0 */
 208         dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
 209         dmc_init(dmc);
 210         dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
 211                                         + DMC_OFFSET);
 212         dmc_init(dmc);
 213 }