These changes are the raw update to qemu-2.6.
[kvmfornfv.git] / qemu / roms / ipxe / src / drivers / net / rtl818x / rtl818x.h
1 /*
2  * Definitions for RTL818x hardware
3  *
4  * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
5  * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
6  *
7  * Modified for iPXE, June 2009, by Joshua Oreman <oremanj@rwcr.net>
8  *
9  * Based on the r8187 driver, which is:
10  * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  */
16
17 #ifndef RTL818X_H
18 #define RTL818X_H
19
20 #include <ipxe/spi_bit.h>
21 #include <ipxe/tables.h>
22 #include <ipxe/net80211.h>
23
24 FILE_LICENCE(GPL2_ONLY);
25
26 struct rtl818x_csr {
27         u8      MAC[6];
28         u8      reserved_0[2];
29         u32     MAR[2];
30         u8      RX_FIFO_COUNT;
31         u8      reserved_1;
32         u8      TX_FIFO_COUNT;
33         u8      BQREQ;
34         u8      reserved_2[4];
35         u32     TSFT[2];
36         u32     TLPDA;
37         u32     TNPDA;
38         u32     THPDA;
39         u16     BRSR;
40         u8      BSSID[6];
41         u8      RESP_RATE;
42         u8      EIFS;
43         u8      reserved_3[1];
44         u8      CMD;
45 #define RTL818X_CMD_TX_ENABLE           (1 << 2)
46 #define RTL818X_CMD_RX_ENABLE           (1 << 3)
47 #define RTL818X_CMD_RESET               (1 << 4)
48         u8      reserved_4[4];
49         u16     INT_MASK;
50         u16     INT_STATUS;
51 #define RTL818X_INT_RX_OK               (1 <<  0)
52 #define RTL818X_INT_RX_ERR              (1 <<  1)
53 #define RTL818X_INT_TXL_OK              (1 <<  2)
54 #define RTL818X_INT_TXL_ERR             (1 <<  3)
55 #define RTL818X_INT_RX_DU               (1 <<  4)
56 #define RTL818X_INT_RX_FO               (1 <<  5)
57 #define RTL818X_INT_TXN_OK              (1 <<  6)
58 #define RTL818X_INT_TXN_ERR             (1 <<  7)
59 #define RTL818X_INT_TXH_OK              (1 <<  8)
60 #define RTL818X_INT_TXH_ERR             (1 <<  9)
61 #define RTL818X_INT_TXB_OK              (1 << 10)
62 #define RTL818X_INT_TXB_ERR             (1 << 11)
63 #define RTL818X_INT_ATIM                (1 << 12)
64 #define RTL818X_INT_BEACON              (1 << 13)
65 #define RTL818X_INT_TIME_OUT            (1 << 14)
66 #define RTL818X_INT_TX_FO               (1 << 15)
67         u32     TX_CONF;
68 #define RTL818X_TX_CONF_LOOPBACK_MAC    (1 << 17)
69 #define RTL818X_TX_CONF_LOOPBACK_CONT   (3 << 17)
70 #define RTL818X_TX_CONF_NO_ICV          (1 << 19)
71 #define RTL818X_TX_CONF_DISCW           (1 << 20)
72 #define RTL818X_TX_CONF_SAT_HWPLCP      (1 << 24)
73 #define RTL818X_TX_CONF_R8180_ABCD      (2 << 25)
74 #define RTL818X_TX_CONF_R8180_F         (3 << 25)
75 #define RTL818X_TX_CONF_R8185_ABC       (4 << 25)
76 #define RTL818X_TX_CONF_R8185_D         (5 << 25)
77 #define RTL818X_TX_CONF_R8187vD         (5 << 25)
78 #define RTL818X_TX_CONF_R8187vD_B       (6 << 25)
79 #define RTL818X_TX_CONF_HWVER_MASK      (7 << 25)
80 #define RTL818X_TX_CONF_DISREQQSIZE     (1 << 28)
81 #define RTL818X_TX_CONF_PROBE_DTS       (1 << 29)
82 #define RTL818X_TX_CONF_HW_SEQNUM       (1 << 30)
83 #define RTL818X_TX_CONF_CW_MIN          (1 << 31)
84         u32     RX_CONF;
85 #define RTL818X_RX_CONF_MONITOR         (1 <<  0)
86 #define RTL818X_RX_CONF_NICMAC          (1 <<  1)
87 #define RTL818X_RX_CONF_MULTICAST       (1 <<  2)
88 #define RTL818X_RX_CONF_BROADCAST       (1 <<  3)
89 #define RTL818X_RX_CONF_FCS             (1 <<  5)
90 #define RTL818X_RX_CONF_DATA            (1 << 18)
91 #define RTL818X_RX_CONF_CTRL            (1 << 19)
92 #define RTL818X_RX_CONF_MGMT            (1 << 20)
93 #define RTL818X_RX_CONF_ADDR3           (1 << 21)
94 #define RTL818X_RX_CONF_PM              (1 << 22)
95 #define RTL818X_RX_CONF_BSSID           (1 << 23)
96 #define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28)
97 #define RTL818X_RX_CONF_CSDM1           (1 << 29)
98 #define RTL818X_RX_CONF_CSDM2           (1 << 30)
99 #define RTL818X_RX_CONF_ONLYERLPKT      (1 << 31)
100         u32     INT_TIMEOUT;
101         u32     TBDA;
102         u8      EEPROM_CMD;
103 #define RTL818X_EEPROM_CMD_READ         (1 << 0)
104 #define RTL818X_EEPROM_CMD_WRITE        (1 << 1)
105 #define RTL818X_EEPROM_CMD_CK           (1 << 2)
106 #define RTL818X_EEPROM_CMD_CS           (1 << 3)
107 #define RTL818X_EEPROM_CMD_NORMAL       (0 << 6)
108 #define RTL818X_EEPROM_CMD_LOAD         (1 << 6)
109 #define RTL818X_EEPROM_CMD_PROGRAM      (2 << 6)
110 #define RTL818X_EEPROM_CMD_CONFIG       (3 << 6)
111         u8      CONFIG0;
112         u8      CONFIG1;
113         u8      CONFIG2;
114 #define RTL818X_CONFIG2_ANTENNA_DIV     (1 << 6)
115         u32     ANAPARAM;
116         u8      MSR;
117 #define RTL818X_MSR_NO_LINK             (0 << 2)
118 #define RTL818X_MSR_ADHOC               (1 << 2)
119 #define RTL818X_MSR_INFRA               (2 << 2)
120 #define RTL818X_MSR_MASTER              (3 << 2)
121 #define RTL818X_MSR_ENEDCA              (4 << 2)
122         u8      CONFIG3;
123 #define RTL818X_CONFIG3_ANAPARAM_WRITE  (1 << 6)
124 #define RTL818X_CONFIG3_GNT_SELECT      (1 << 7)
125         u8      CONFIG4;
126 #define RTL818X_CONFIG4_POWEROFF        (1 << 6)
127 #define RTL818X_CONFIG4_VCOOFF          (1 << 7)
128         u8      TESTR;
129         u8      reserved_9[2];
130         u8      PGSELECT;
131         u8      SECURITY;
132         u32     ANAPARAM2;
133         u8      reserved_10[12];
134         u16     BEACON_INTERVAL;
135         u16     ATIM_WND;
136         u16     BEACON_INTERVAL_TIME;
137         u16     ATIMTR_INTERVAL;
138         u8      PHY_DELAY;
139         u8      CARRIER_SENSE_COUNTER;
140         u8      reserved_11[2];
141         u8      PHY[4];
142         u16     RFPinsOutput;
143         u16     RFPinsEnable;
144         u16     RFPinsSelect;
145         u16     RFPinsInput;
146         u32     RF_PARA;
147         u32     RF_TIMING;
148         u8      GP_ENABLE;
149         u8      GPIO;
150         u8      reserved_12[2];
151         u32     HSSI_PARA;
152         u8      reserved_13[4];
153         u8      TX_AGC_CTL;
154 #define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT         (1 << 0)
155 #define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT       (1 << 1)
156 #define RTL818X_TX_AGC_CTL_FEEDBACK_ANT                 (1 << 2)
157         u8      TX_GAIN_CCK;
158         u8      TX_GAIN_OFDM;
159         u8      TX_ANTENNA;
160         u8      reserved_14[16];
161         u8      WPA_CONF;
162         u8      reserved_15[3];
163         u8      SIFS;
164         u8      DIFS;
165         u8      SLOT;
166         u8      reserved_16[5];
167         u8      CW_CONF;
168 #define RTL818X_CW_CONF_PERPACKET_CW_SHIFT      (1 << 0)
169 #define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT   (1 << 1)
170         u8      CW_VAL;
171         u8      RATE_FALLBACK;
172 #define RTL818X_RATE_FALLBACK_ENABLE    (1 << 7)
173         u8      ACM_CONTROL;
174         u8      reserved_17[24];
175         u8      CONFIG5;
176         u8      TX_DMA_POLLING;
177         u8      reserved_18[2];
178         u16     CWR;
179         u8      RETRY_CTR;
180         u8      reserved_19[3];
181         u16     INT_MIG;
182 /* RTL818X_R8187B_*: magic numbers from ioregisters */
183 #define RTL818X_R8187B_B        0
184 #define RTL818X_R8187B_D        1
185 #define RTL818X_R8187B_E        2
186         u32     RDSAR;
187         u16     TID_AC_MAP;
188         u8      reserved_20[4];
189         u8      ANAPARAM3;
190         u8      reserved_21[5];
191         u16     FEMR;
192         u8      reserved_22[4];
193         u16     TALLY_CNT;
194         u8      TALLY_SEL;
195 } __attribute__((packed));
196
197 #define MAX_RX_SIZE IEEE80211_MAX_FRAME_LEN
198
199 #define RF_PARAM_ANALOGPHY      (1 << 0)
200 #define RF_PARAM_ANTBDEFAULT    (1 << 1)
201 #define RF_PARAM_CARRIERSENSE1  (1 << 2)
202 #define RF_PARAM_CARRIERSENSE2  (1 << 3)
203
204 #define BB_ANTATTEN_CHAN14      0x0C
205 #define BB_ANTENNA_B            0x40
206
207 #define BB_HOST_BANG            (1 << 30)
208 #define BB_HOST_BANG_EN         (1 << 2)
209 #define BB_HOST_BANG_CLK        (1 << 1)
210 #define BB_HOST_BANG_DATA       1
211
212 #define ANAPARAM_TXDACOFF_SHIFT 27
213 #define ANAPARAM_PWR0_SHIFT     28
214 #define ANAPARAM_PWR0_MASK      (0x07 << ANAPARAM_PWR0_SHIFT)
215 #define ANAPARAM_PWR1_SHIFT     20
216 #define ANAPARAM_PWR1_MASK      (0x7F << ANAPARAM_PWR1_SHIFT)
217
218 #define RTL818X_RX_RING_SIZE    8 /* doesn't have to be a power of 2 */
219 #define RTL818X_TX_RING_SIZE    8 /* nor this [but 2^n is very slightly faster] */
220 #define RTL818X_RING_ALIGN      256
221
222 #define RTL818X_MAX_RETRIES     4
223
224 enum rtl818x_tx_desc_flags {
225         RTL818X_TX_DESC_FLAG_NO_ENC     = (1 << 15),
226         RTL818X_TX_DESC_FLAG_TX_OK      = (1 << 15),
227         RTL818X_TX_DESC_FLAG_SPLCP      = (1 << 16),
228         RTL818X_TX_DESC_FLAG_RX_UNDER   = (1 << 16),
229         RTL818X_TX_DESC_FLAG_MOREFRAG   = (1 << 17),
230         RTL818X_TX_DESC_FLAG_CTS        = (1 << 18),
231         RTL818X_TX_DESC_FLAG_RTS        = (1 << 23),
232         RTL818X_TX_DESC_FLAG_LS         = (1 << 28),
233         RTL818X_TX_DESC_FLAG_FS         = (1 << 29),
234         RTL818X_TX_DESC_FLAG_DMA        = (1 << 30),
235         RTL818X_TX_DESC_FLAG_OWN        = (1 << 31)
236 };
237
238 struct rtl818x_tx_desc {
239         u32 flags;
240         u16 rts_duration;
241         u16 plcp_len;
242         u32 tx_buf;
243         u32 frame_len;
244         u32 next_tx_desc;
245         u8 cw;
246         u8 retry_limit;
247         u8 agc;
248         u8 flags2;
249         u32 reserved[2];
250 } __attribute__ ((packed));
251
252 enum rtl818x_rx_desc_flags {
253         RTL818X_RX_DESC_FLAG_ICV_ERR    = (1 << 12),
254         RTL818X_RX_DESC_FLAG_CRC32_ERR  = (1 << 13),
255         RTL818X_RX_DESC_FLAG_PM         = (1 << 14),
256         RTL818X_RX_DESC_FLAG_RX_ERR     = (1 << 15),
257         RTL818X_RX_DESC_FLAG_BCAST      = (1 << 16),
258         RTL818X_RX_DESC_FLAG_PAM        = (1 << 17),
259         RTL818X_RX_DESC_FLAG_MCAST      = (1 << 18),
260         RTL818X_RX_DESC_FLAG_QOS        = (1 << 19), /* RTL8187(B) only */
261         RTL818X_RX_DESC_FLAG_TRSW       = (1 << 24), /* RTL8187(B) only */
262         RTL818X_RX_DESC_FLAG_SPLCP      = (1 << 25),
263         RTL818X_RX_DESC_FLAG_FOF        = (1 << 26),
264         RTL818X_RX_DESC_FLAG_DMA_FAIL   = (1 << 27),
265         RTL818X_RX_DESC_FLAG_LS         = (1 << 28),
266         RTL818X_RX_DESC_FLAG_FS         = (1 << 29),
267         RTL818X_RX_DESC_FLAG_EOR        = (1 << 30),
268         RTL818X_RX_DESC_FLAG_OWN        = (1 << 31)
269 };
270
271 struct rtl818x_rx_desc {
272         u32 flags;
273         u32 flags2;
274         union {
275                 u32 rx_buf;
276                 u64 tsft;
277         };
278 } __attribute__ ((packed));
279
280 struct rtl818x_priv {
281         struct rtl818x_csr *map;
282         const struct rtl818x_rf_ops *rf;
283         int rf_flag; /* whatever RF driver wishes to use it for */
284         int hw_rate;
285         int hw_rtscts_rate;
286
287         struct spi_bit_basher spibit;
288         struct spi_device eeprom;
289
290         struct rtl818x_rx_desc *rx_ring;
291         u32 rx_ring_dma;
292         unsigned int rx_idx;    /* next desc to be filled by card */
293         struct io_buffer *rx_buf[RTL818X_RX_RING_SIZE];
294
295         struct rtl818x_tx_desc *tx_ring;
296         u32 tx_ring_dma;
297         unsigned int tx_cons;   /* next desc to be filled by card */
298         unsigned int tx_prod;   /* next desc to be filled by driver */
299         struct io_buffer *tx_buf[RTL818X_TX_RING_SIZE];
300
301         struct pci_device *pdev;
302         u32 rx_conf;
303
304         u16 txpower[14];
305
306         int r8185;
307         u32 anaparam;
308         u16 rfparam;
309         u8 csthreshold;
310 };
311
312 void rtl818x_write_phy(struct net80211_device *dev, u8 addr, u32 data);
313 void rtl818x_set_anaparam(struct rtl818x_priv *priv, u32 anaparam);
314
315 static inline u8 rtl818x_ioread8(struct rtl818x_priv *priv __unused, u8 *addr)
316 {
317         return inb(addr);
318 }
319
320 static inline u16 rtl818x_ioread16(struct rtl818x_priv *priv __unused, u16 *addr)
321 {
322         return inw(addr);
323 }
324
325 static inline u32 rtl818x_ioread32(struct rtl818x_priv *priv __unused, u32 *addr)
326 {
327         return inl(addr);
328 }
329
330 static inline void rtl818x_iowrite8(struct rtl818x_priv *priv __unused,
331                                     u8 *addr, u8 val)
332 {
333         outb(val, addr);
334 }
335
336 static inline void rtl818x_iowrite16(struct rtl818x_priv *priv __unused,
337                                      u16 *addr, u16 val)
338 {
339         outw(val, addr);
340 }
341
342 static inline void rtl818x_iowrite32(struct rtl818x_priv *priv __unused,
343                                      u32 *addr, u32 val)
344 {
345         outl(val, addr);
346 }
347
348 #define RTL818X_RF_DRIVERS __table(struct rtl818x_rf_ops, "rtl818x_rf_drivers")
349 #define __rtl818x_rf_driver __table_entry(RTL818X_RF_DRIVERS, 01)
350
351 struct rtl818x_rf_ops {
352         char *name;
353         u8 id;                  /* as identified in EEPROM */
354         void (*init)(struct net80211_device *dev);
355         void (*stop)(struct net80211_device *dev);
356         void (*set_chan)(struct net80211_device *dev, struct net80211_channel *chan);
357         void (*conf_erp)(struct net80211_device *dev); /* set based on dev->erp_flags */
358 };
359
360 extern int rtl818x_probe(struct pci_device *pdev );
361 extern void rtl818x_remove(struct pci_device *pdev);
362
363 #endif /* RTL818X_H */