2 This software is available to you under a choice of one of two
3 licenses. You may choose to be licensed under the terms of the GNU
4 General Public License (GPL) Version 2, available at
5 <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
6 license, available in the LICENSE.TXT file accompanying this
7 software. These details are also available at
8 <http://openib.org/license.html>.
10 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
11 EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
12 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
13 NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
14 BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
15 ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
16 CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
19 Copyright (c) 2004 Mellanox Technologies Ltd. All rights reserved.
22 FILE_LICENCE ( GPL2_ONLY );
25 *** This file was generated at "Tue Nov 22 15:21:23 2005"
27 *** % csp_bf -copyright=/mswg/misc/license-header.txt -prefix arbelprm_ -bits -fixnames MT25218_PRM.csp
30 #ifndef H_prefix_arbelprm_bits_fixnames_MT25218_PRM_csp_H
31 #define H_prefix_arbelprm_bits_fixnames_MT25218_PRM_csp_H
33 /* UD Address Vector */
35 struct arbelprm_ud_address_vector_st { /* Little Endian */
36 pseudo_bit_t pd[0x00018]; /* Protection Domain */
37 pseudo_bit_t port_number[0x00002]; /* Port number
41 pseudo_bit_t reserved0[0x00006];
43 pseudo_bit_t rlid[0x00010]; /* Remote (Destination) LID */
44 pseudo_bit_t my_lid_path_bits[0x00007];/* Source LID - the lower 7 bits (upper bits are taken from PortInfo) */
45 pseudo_bit_t g[0x00001]; /* Global address enable - if set, GRH will be formed for packet header */
46 pseudo_bit_t reserved1[0x00008];
48 pseudo_bit_t hop_limit[0x00008]; /* IPv6 hop limit */
49 pseudo_bit_t max_stat_rate[0x00003];/* Maximum static rate control.
54 pseudo_bit_t reserved2[0x00001];
55 pseudo_bit_t msg[0x00002]; /* Max Message size, size is 256*2^MSG bytes */
56 pseudo_bit_t reserved3[0x00002];
57 pseudo_bit_t mgid_index[0x00006]; /* Index to port GID table
58 mgid_index = (port_number-1) * 2^log_max_gid + gid_index
60 1. log_max_gid is taken from QUERY_DEV_LIM command
61 2. gid_index is the index to the GID table */
62 pseudo_bit_t reserved4[0x0000a];
64 pseudo_bit_t flow_label[0x00014]; /* IPv6 flow label */
65 pseudo_bit_t tclass[0x00008]; /* IPv6 TClass */
66 pseudo_bit_t sl[0x00004]; /* InfiniBand Service Level (SL) */
68 pseudo_bit_t rgid_127_96[0x00020]; /* Remote GID[127:96] */
70 pseudo_bit_t rgid_95_64[0x00020]; /* Remote GID[95:64] */
72 pseudo_bit_t rgid_63_32[0x00020]; /* Remote GID[63:32] */
74 pseudo_bit_t rgid_31_0[0x00020]; /* Remote GID[31:0] if G bit is set. Must be set to 0x2 if G bit is cleared. */
80 struct arbelprm_send_doorbell_st { /* Little Endian */
81 pseudo_bit_t nopcode[0x00005]; /* Opcode of descriptor to be executed */
82 pseudo_bit_t f[0x00001]; /* Fence bit. If set, descriptor is fenced */
83 pseudo_bit_t reserved0[0x00002];
84 pseudo_bit_t wqe_counter[0x00010]; /* Modulo-64K counter of WQEs posted to the QP since its creation excluding the newly posted WQEs in this doorbell. Should be zero for the first doorbell on the QP */
85 pseudo_bit_t wqe_cnt[0x00008]; /* Number of WQEs posted with this doorbell. Must be grater then zero. */
87 pseudo_bit_t nds[0x00006]; /* Next descriptor size (in 16-byte chunks) */
88 pseudo_bit_t reserved1[0x00002];
89 pseudo_bit_t qpn[0x00018]; /* QP number this doorbell is rung on */
93 /* ACCESS_LAM_inject_errors_input_modifier */
95 struct arbelprm_access_lam_inject_errors_input_modifier_st { /* Little Endian */
96 pseudo_bit_t index3[0x00007];
97 pseudo_bit_t q3[0x00001];
98 pseudo_bit_t index2[0x00007];
99 pseudo_bit_t q2[0x00001];
100 pseudo_bit_t index1[0x00007];
101 pseudo_bit_t q1[0x00001];
102 pseudo_bit_t index0[0x00007];
103 pseudo_bit_t q0[0x00001];
107 /* ACCESS_LAM_inject_errors_input_parameter */
109 struct arbelprm_access_lam_inject_errors_input_parameter_st { /* Little Endian */
110 pseudo_bit_t ba[0x00002]; /* Bank Address */
111 pseudo_bit_t da[0x00002]; /* Dimm Address */
112 pseudo_bit_t reserved0[0x0001c];
114 pseudo_bit_t ra[0x00010]; /* Row Address */
115 pseudo_bit_t ca[0x00010]; /* Column Address */
121 struct arbelprm_recv_wqe_segment_next_st { /* Little Endian */
122 pseudo_bit_t reserved0[0x00006];
123 pseudo_bit_t nda_31_6[0x0001a]; /* Next WQE address, low 32 bit. WQE address must be aligned to 64-byte boundary (6 LSB are forced ZERO). */
125 pseudo_bit_t nds[0x00006]; /* Next WQE size in OctoWords (16 bytes).
126 Zero value in NDS field signals end of WQEs? chain.
128 pseudo_bit_t reserved1[0x0001a];
132 /* Send wqe segment data inline */
134 struct arbelprm_wqe_segment_data_inline_st { /* Little Endian */
135 pseudo_bit_t byte_count[0x0000a]; /* Not including padding for 16Byte chunks */
136 pseudo_bit_t reserved0[0x00015];
137 pseudo_bit_t always1[0x00001];
139 pseudo_bit_t data[0x00018]; /* Data may be more this segment size - in 16Byte chunks */
140 pseudo_bit_t reserved1[0x00008];
142 pseudo_bit_t reserved2[0x00040];
146 /* Send wqe segment data ptr */
148 struct arbelprm_wqe_segment_data_ptr_st { /* Little Endian */
149 pseudo_bit_t byte_count[0x0001f];
150 pseudo_bit_t always0[0x00001];
152 pseudo_bit_t l_key[0x00020];
154 pseudo_bit_t local_address_h[0x00020];
156 pseudo_bit_t local_address_l[0x00020];
160 /* Send wqe segment rd */
162 struct arbelprm_local_invalidate_segment_st { /* Little Endian */
163 pseudo_bit_t reserved0[0x00040];
165 pseudo_bit_t mem_key[0x00018];
166 pseudo_bit_t reserved1[0x00008];
168 pseudo_bit_t reserved2[0x000a0];
172 /* Fast_Registration_Segment */
174 struct arbelprm_fast_registration_segment_st { /* Little Endian */
175 pseudo_bit_t reserved0[0x0001b];
176 pseudo_bit_t lr[0x00001]; /* If set - Local Read access will be enabled */
177 pseudo_bit_t lw[0x00001]; /* If set - Local Write access will be enabled */
178 pseudo_bit_t rr[0x00001]; /* If set - Remote Read access will be enabled */
179 pseudo_bit_t rw[0x00001]; /* If set - Remote Write access will be enabled */
180 pseudo_bit_t a[0x00001]; /* If set - Remote Atomic access will be enabled */
182 pseudo_bit_t pbl_ptr_63_32[0x00020];/* Physical address pointer [63:32] to the physical buffer list */
184 pseudo_bit_t mem_key[0x00020]; /* Memory Key on which the fast registration is executed on. */
186 pseudo_bit_t page_size[0x00005]; /* Page size used for the region. Actual size is [4K]*2^Page_size bytes.
187 page_size should be less than 20. */
188 pseudo_bit_t reserved1[0x00002];
189 pseudo_bit_t zb[0x00001]; /* Zero Based Region */
190 pseudo_bit_t pbl_ptr_31_8[0x00018]; /* Physical address pointer [31:8] to the physical buffer list */
192 pseudo_bit_t start_address_h[0x00020];/* Start Address[63:32] - Virtual Address where this region starts */
194 pseudo_bit_t start_address_l[0x00020];/* Start Address[31:0] - Virtual Address where this region starts */
196 pseudo_bit_t reg_len_h[0x00020]; /* Region Length[63:32] */
198 pseudo_bit_t reg_len_l[0x00020]; /* Region Length[31:0] */
202 /* Send wqe segment atomic */
204 struct arbelprm_wqe_segment_atomic_st { /* Little Endian */
205 pseudo_bit_t swap_add_h[0x00020];
207 pseudo_bit_t swap_add_l[0x00020];
209 pseudo_bit_t compare_h[0x00020];
211 pseudo_bit_t compare_l[0x00020];
215 /* Send wqe segment remote address */
217 struct arbelprm_wqe_segment_remote_address_st { /* Little Endian */
218 pseudo_bit_t remote_virt_addr_h[0x00020];
220 pseudo_bit_t remote_virt_addr_l[0x00020];
222 pseudo_bit_t rkey[0x00020];
224 pseudo_bit_t reserved0[0x00020];
228 /* end wqe segment bind */
230 struct arbelprm_wqe_segment_bind_st { /* Little Endian */
231 pseudo_bit_t reserved0[0x0001d];
232 pseudo_bit_t rr[0x00001]; /* If set, Remote Read Enable for bound window. */
233 pseudo_bit_t rw[0x00001]; /* If set, Remote Write Enable for bound window.
235 pseudo_bit_t a[0x00001]; /* If set, Atomic Enable for bound window. */
237 pseudo_bit_t reserved1[0x0001e];
238 pseudo_bit_t zb[0x00001]; /* If set, Window is Zero Based. */
239 pseudo_bit_t type[0x00001]; /* Window type.
244 pseudo_bit_t new_rkey[0x00020]; /* The new RKey of window to bind */
246 pseudo_bit_t region_lkey[0x00020]; /* Local key of region, which window will be bound to */
248 pseudo_bit_t start_address_h[0x00020];
250 pseudo_bit_t start_address_l[0x00020];
252 pseudo_bit_t length_h[0x00020];
254 pseudo_bit_t length_l[0x00020];
258 /* Send wqe segment ud */
260 struct arbelprm_wqe_segment_ud_st { /* Little Endian */
261 struct arbelprm_ud_address_vector_st ud_address_vector;/* UD Address Vector */
263 pseudo_bit_t destination_qp[0x00018];
264 pseudo_bit_t reserved0[0x00008];
266 pseudo_bit_t q_key[0x00020];
268 pseudo_bit_t reserved1[0x00040];
272 /* Send wqe segment rd */
274 struct arbelprm_wqe_segment_rd_st { /* Little Endian */
275 pseudo_bit_t destination_qp[0x00018];
276 pseudo_bit_t reserved0[0x00008];
278 pseudo_bit_t q_key[0x00020];
280 pseudo_bit_t reserved1[0x00040];
284 /* Send wqe segment ctrl */
286 struct arbelprm_wqe_segment_ctrl_send_st { /* Little Endian */
287 pseudo_bit_t always1[0x00001];
288 pseudo_bit_t s[0x00001]; /* Solicited Event bit. If set, SE (Solicited Event) bit is set in the (last packet of) message. */
289 pseudo_bit_t e[0x00001]; /* Event bit. If set, event is generated upon WQE?s completion, if QP is allowed to generate an event. Every WQE with E-bit set generates an event. The C bit must be set on unsignalled QPs if the E bit is set. */
290 pseudo_bit_t c[0x00001]; /* Completion Queue bit. Valid for unsignalled QPs only. If set, the CQ is updated upon WQE?s completion */
291 pseudo_bit_t ip[0x00001]; /* When set, InfiniHost III Ex will calculate the IP checksum of the IP header that is present immediately after the IPoverIB encapsulation header. In the case of multiple headers (encapsulation), InfiniHost III Ex will calculate the checksum only for the first IP header following the IPoverIB encapsulation header. Not Valid for IPv6 packets */
292 pseudo_bit_t tcp_udp[0x00001]; /* When set, InfiniHost III Ex will calculate the TCP/UDP checksum of the packet that is present immediately after the IP header. In the case of multiple headers (encapsulation), InfiniHost III Ex will calculate the checksum only for the first TCP header following the IP header. This bit may be set only if the entire TCP/UDP segment is present in one IB packet */
293 pseudo_bit_t reserved0[0x00001];
294 pseudo_bit_t so[0x00001]; /* Strong Ordering - when set, the WQE will be executed only after all previous WQEs have been executed. Can be set for RC WQEs only. This bit must be set in type two BIND, Fast Registration and Local invalidate operations. */
295 pseudo_bit_t reserved1[0x00018];
297 pseudo_bit_t immediate[0x00020]; /* If the OpCode encodes an operation with Immediate (RDMA-write/SEND), This field will hold the Immediate data to be sent. If the OpCode encodes send and invalidate operations, this field holds the Invalidation key to be inserted into the packet; otherwise, this field is reserved. */
301 /* Send wqe segment next */
303 struct arbelprm_wqe_segment_next_st { /* Little Endian */
304 pseudo_bit_t nopcode[0x00005]; /* Next Opcode: OpCode to be used in the next WQE. Encodes the type of operation to be executed on the QP:
305 ?00000? - NOP. WQE with this opcode creates a completion, but does nothing else
307 ?01001? - RDMA-Write with Immediate
309 ?10001? - Atomic Compare & swap
310 ?10010? - Atomic Fetch & Add
311 ?11000? - Bind memory window
313 The encoding for the following operations depends on the QP type:
314 For RC, UC and RD QP:
316 ?01011? - SEND with Immediate
319 the encoding depends on the values of bit[31] of the Q_key field in the Datagram Segment (see Table 39, ?Unreliable Datagram Segment Format - Pointers,? on page 101) of
320 both the current WQE and the next WQE, as follows:
322 If the last WQE Q_Key bit[31] is clear and the next WQE Q_key bit[31] is set :
324 ?01001? - SEND with Immediate
326 otherwise (if the next WQE Q_key bit[31] is cleared, or the last WQE Q_Key bit[31] is set):
328 ?01011? - SEND with Immediate
330 All other opcode values are RESERVED, and will result in invalid operation execution. */
331 pseudo_bit_t reserved0[0x00001];
332 pseudo_bit_t nda_31_6[0x0001a]; /* Next WQE address, low 32 bit. WQE address must be aligned to 64-byte boundary (6 LSB are forced ZERO). */
334 pseudo_bit_t nds[0x00006]; /* Next WQE size in OctoWords (16 bytes).
335 Zero value in NDS field signals end of WQEs? chain.
337 pseudo_bit_t f[0x00001]; /* Fence bit. If set, next WQE will start execution only after all previous Read/Atomic WQEs complete. */
338 pseudo_bit_t always1[0x00001];
339 pseudo_bit_t reserved1[0x00018];
345 struct arbelprm_address_path_st { /* Little Endian */
346 pseudo_bit_t pkey_index[0x00007]; /* PKey table index */
347 pseudo_bit_t reserved0[0x00011];
348 pseudo_bit_t port_number[0x00002]; /* Specific port associated with this QP/EE.
352 pseudo_bit_t reserved1[0x00006];
354 pseudo_bit_t rlid[0x00010]; /* Remote (Destination) LID */
355 pseudo_bit_t my_lid_path_bits[0x00007];/* Source LID - the lower 7 bits (upper bits are taken from PortInfo) */
356 pseudo_bit_t g[0x00001]; /* Global address enable - if set, GRH will be formed for packet header */
357 pseudo_bit_t reserved2[0x00005];
358 pseudo_bit_t rnr_retry[0x00003]; /* RNR retry count (see C9-132 in IB spec Vol 1)
359 0-6 - number of retries
362 pseudo_bit_t hop_limit[0x00008]; /* IPv6 hop limit */
363 pseudo_bit_t max_stat_rate[0x00003];/* Maximum static rate control.
364 0 - 100% injection rate
365 1 - 25% injection rate
366 2 - 12.5% injection rate
367 3 - 50% injection rate
369 pseudo_bit_t reserved3[0x00005];
370 pseudo_bit_t mgid_index[0x00006]; /* Index to port GID table */
371 pseudo_bit_t reserved4[0x00005];
372 pseudo_bit_t ack_timeout[0x00005]; /* Local ACK timeout - Transport timer for activation of retransmission mechanism. Refer to IB spec Vol1 9.7.6.1.3 for further details.
373 The transport timer is set to 4.096us*2^ack_timeout, if ack_timeout is 0 then transport timer is disabled. */
375 pseudo_bit_t flow_label[0x00014]; /* IPv6 flow label */
376 pseudo_bit_t tclass[0x00008]; /* IPv6 TClass */
377 pseudo_bit_t sl[0x00004]; /* InfiniBand Service Level (SL) */
379 pseudo_bit_t rgid_127_96[0x00020]; /* Remote GID[127:96] */
381 pseudo_bit_t rgid_95_64[0x00020]; /* Remote GID[95:64] */
383 pseudo_bit_t rgid_63_32[0x00020]; /* Remote GID[63:32] */
385 pseudo_bit_t rgid_31_0[0x00020]; /* Remote GID[31:0] */
389 /* HCA Command Register (HCR) */
391 struct arbelprm_hca_command_register_st { /* Little Endian */
392 pseudo_bit_t in_param_h[0x00020]; /* Input Parameter: parameter[63:32] or pointer[63:32] to input mailbox (see command description) */
394 pseudo_bit_t in_param_l[0x00020]; /* Input Parameter: parameter[31:0] or pointer[31:0] to input mailbox (see command description) */
396 pseudo_bit_t input_modifier[0x00020];/* Input Parameter Modifier */
398 pseudo_bit_t out_param_h[0x00020]; /* Output Parameter: parameter[63:32] or pointer[63:32] to output mailbox (see command description) */
400 pseudo_bit_t out_param_l[0x00020]; /* Output Parameter: parameter[31:0] or pointer[31:0] to output mailbox (see command description) */
402 pseudo_bit_t reserved0[0x00010];
403 pseudo_bit_t token[0x00010]; /* Software assigned token to the command, to uniquely identify it. The token is returned to the software in the EQE reported. */
405 pseudo_bit_t opcode[0x0000c]; /* Command opcode */
406 pseudo_bit_t opcode_modifier[0x00004];/* Opcode Modifier, see specific description for each command. */
407 pseudo_bit_t reserved1[0x00006];
408 pseudo_bit_t e[0x00001]; /* Event Request
409 0 - Don't report event (software will poll the GO bit)
410 1 - Report event to EQ when the command completes */
411 pseudo_bit_t go[0x00001]; /* Go (0=Software ownership for the HCR, 1=Hardware ownership for the HCR)
412 Software can write to the HCR only if Go bit is cleared.
413 Software must set the Go bit to trigger the HW to execute the command. Software must not write to this register value other than 1 for the Go bit. */
414 pseudo_bit_t status[0x00008]; /* Command execution status report. Valid only if command interface in under SW ownership (Go bit is cleared)
415 0 - command completed without error. If different than zero, command execution completed with error. Syndrom encoding is depended on command executed and is defined for each command */
421 struct arbelprm_cq_cmd_doorbell_st { /* Little Endian */
422 pseudo_bit_t cqn[0x00018]; /* CQ number accessed */
423 pseudo_bit_t cmd[0x00003]; /* Command to be executed on CQ
425 0x1 - Request notification for next Solicited completion event. CQ_param specifies the current CQ Consumer Counter.
426 0x2 - Request notification for next Solicited or Unsolicited completion event. CQ_param specifies the current CQ Consumer Counter.
427 0x3 - Request notification for multiple completions (Arm-N). CQ_param specifies the value of the CQ Counter that when reached by HW (i.e. HW generates a CQE into this Counter) Event will be generated
429 pseudo_bit_t reserved0[0x00001];
430 pseudo_bit_t cmd_sn[0x00002]; /* Command Sequence Number - This field should be incremented upon receiving completion notification of the respective CQ.
431 This transition is done by ringing Request notification for next Solicited, Request notification for next Solicited or Unsolicited
432 completion or Request notification for multiple completions doorbells after receiving completion notification.
433 This field is initialized to Zero */
434 pseudo_bit_t reserved1[0x00002];
436 pseudo_bit_t cq_param[0x00020]; /* parameter to be used by CQ command */
440 /* RD-send doorbell */
442 struct arbelprm_rd_send_doorbell_st { /* Little Endian */
443 pseudo_bit_t reserved0[0x00008];
444 pseudo_bit_t een[0x00018]; /* End-to-end context number (reliable datagram)
445 Must be zero for Nop and Bind operations */
447 pseudo_bit_t reserved1[0x00008];
448 pseudo_bit_t qpn[0x00018]; /* QP number this doorbell is rung on */
450 struct arbelprm_send_doorbell_st send_doorbell;/* Send Parameters */
454 /* Multicast Group Member QP */
456 struct arbelprm_mgmqp_st { /* Little Endian */
457 pseudo_bit_t qpn_i[0x00018]; /* QPN_i: QP number which is a member in this multicast group. Valid only if Qi bit is set. Length of the QPN_i list is set in INIT_HCA */
458 pseudo_bit_t reserved0[0x00007];
459 pseudo_bit_t qi[0x00001]; /* Qi: QPN_i is valid */
465 struct arbelprm_vsd_st { /* Little Endian */
466 pseudo_bit_t vsd_dw0[0x00020];
468 pseudo_bit_t vsd_dw1[0x00020];
470 pseudo_bit_t vsd_dw2[0x00020];
472 pseudo_bit_t vsd_dw3[0x00020];
474 pseudo_bit_t vsd_dw4[0x00020];
476 pseudo_bit_t vsd_dw5[0x00020];
478 pseudo_bit_t vsd_dw6[0x00020];
480 pseudo_bit_t vsd_dw7[0x00020];
482 pseudo_bit_t vsd_dw8[0x00020];
484 pseudo_bit_t vsd_dw9[0x00020];
486 pseudo_bit_t vsd_dw10[0x00020];
488 pseudo_bit_t vsd_dw11[0x00020];
490 pseudo_bit_t vsd_dw12[0x00020];
492 pseudo_bit_t vsd_dw13[0x00020];
494 pseudo_bit_t vsd_dw14[0x00020];
496 pseudo_bit_t vsd_dw15[0x00020];
498 pseudo_bit_t vsd_dw16[0x00020];
500 pseudo_bit_t vsd_dw17[0x00020];
502 pseudo_bit_t vsd_dw18[0x00020];
504 pseudo_bit_t vsd_dw19[0x00020];
506 pseudo_bit_t vsd_dw20[0x00020];
508 pseudo_bit_t vsd_dw21[0x00020];
510 pseudo_bit_t vsd_dw22[0x00020];
512 pseudo_bit_t vsd_dw23[0x00020];
514 pseudo_bit_t vsd_dw24[0x00020];
516 pseudo_bit_t vsd_dw25[0x00020];
518 pseudo_bit_t vsd_dw26[0x00020];
520 pseudo_bit_t vsd_dw27[0x00020];
522 pseudo_bit_t vsd_dw28[0x00020];
524 pseudo_bit_t vsd_dw29[0x00020];
526 pseudo_bit_t vsd_dw30[0x00020];
528 pseudo_bit_t vsd_dw31[0x00020];
530 pseudo_bit_t vsd_dw32[0x00020];
532 pseudo_bit_t vsd_dw33[0x00020];
534 pseudo_bit_t vsd_dw34[0x00020];
536 pseudo_bit_t vsd_dw35[0x00020];
538 pseudo_bit_t vsd_dw36[0x00020];
540 pseudo_bit_t vsd_dw37[0x00020];
542 pseudo_bit_t vsd_dw38[0x00020];
544 pseudo_bit_t vsd_dw39[0x00020];
546 pseudo_bit_t vsd_dw40[0x00020];
548 pseudo_bit_t vsd_dw41[0x00020];
550 pseudo_bit_t vsd_dw42[0x00020];
552 pseudo_bit_t vsd_dw43[0x00020];
554 pseudo_bit_t vsd_dw44[0x00020];
556 pseudo_bit_t vsd_dw45[0x00020];
558 pseudo_bit_t vsd_dw46[0x00020];
560 pseudo_bit_t vsd_dw47[0x00020];
562 pseudo_bit_t vsd_dw48[0x00020];
564 pseudo_bit_t vsd_dw49[0x00020];
566 pseudo_bit_t vsd_dw50[0x00020];
568 pseudo_bit_t vsd_dw51[0x00020];
570 pseudo_bit_t vsd_dw52[0x00020];
572 pseudo_bit_t vsd_dw53[0x00020];
574 pseudo_bit_t vsd_dw54[0x00020];
576 pseudo_bit_t vsd_dw55[0x00020];
580 /* ACCESS_LAM_inject_errors */
582 struct arbelprm_access_lam_inject_errors_st { /* Little Endian */
583 struct arbelprm_access_lam_inject_errors_input_parameter_st access_lam_inject_errors_input_parameter;
585 struct arbelprm_access_lam_inject_errors_input_modifier_st access_lam_inject_errors_input_modifier;
587 pseudo_bit_t reserved0[0x00020];
591 /* Logical DIMM Information */
593 struct arbelprm_dimminfo_st { /* Little Endian */
594 pseudo_bit_t dimmsize[0x00010]; /* Size of DIMM in units of 2^20 Bytes. This value is valid only when DIMMStatus is 0. */
595 pseudo_bit_t reserved0[0x00008];
596 pseudo_bit_t dimmstatus[0x00001]; /* DIMM Status
600 pseudo_bit_t dh[0x00001]; /* When set, the DIMM is Hidden and can not be accessed from the PCI bus. */
601 pseudo_bit_t wo[0x00001]; /* When set, the DIMM is write only.
602 If data integrity is configured (other than none), the DIMM must be
603 only targeted by write transactions where the address and size are multiples of 16 bytes. */
604 pseudo_bit_t reserved1[0x00005];
606 pseudo_bit_t spd[0x00001]; /* 0 - DIMM SPD was read from DIMM
607 1 - DIMM SPD was read from InfiniHost-III-EX NVMEM */
608 pseudo_bit_t sladr[0x00003]; /* SPD Slave Address 3 LSBits.
609 Valid only if spd bit is 0. */
610 pseudo_bit_t sock_num[0x00002]; /* DIMM socket number (for double sided DIMM one of the two numbers will be reported) */
611 pseudo_bit_t syn[0x00004]; /* Error syndrome (valid regardless of status value)
612 0 - DIMM has no error
613 1 - SPD error (e.g. checksum error, no response, error while reading)
614 2 - DIMM out of bounds (e.g. DIMM rows number is not between 7 and 14, DIMM type is not 2)
615 3 - DIMM conflict (e.g. mix of registered and unbuffered DIMMs, CAS latency conflict)
616 5 - DIMM size trimmed due to configuration (size exceeds)
617 other - Error, reserved
619 pseudo_bit_t reserved2[0x00016];
621 pseudo_bit_t reserved3[0x00040];
623 pseudo_bit_t dimm_start_adr_h[0x00020];/* DIMM memory start address [63:32]. This value is valid only when DIMMStatus is 0. */
625 pseudo_bit_t dimm_start_adr_l[0x00020];/* DIMM memory start address [31:0]. This value is valid only when DIMMStatus is 0. */
627 pseudo_bit_t reserved4[0x00040];
633 struct arbelprm_uar_params_st { /* Little Endian */
634 pseudo_bit_t uar_base_addr_h[0x00020];/* UAR Base (pyhsical) Address [63:32] (QUERY_HCA only) */
636 pseudo_bit_t reserved0[0x00014];
637 pseudo_bit_t uar_base_addr_l[0x0000c];/* UAR Base (pyhsical) Address [31:20] (QUERY_HCA only) */
639 pseudo_bit_t uar_page_sz[0x00008]; /* This field defines the size of each UAR page.
640 Size of UAR Page is 4KB*2^UAR_Page_Size */
641 pseudo_bit_t log_max_uars[0x00004]; /* Number of UARs supported is 2^log_max_UARs */
642 pseudo_bit_t reserved1[0x00004];
643 pseudo_bit_t log_uar_entry_sz[0x00006];/* Size of UAR Context entry is 2^log_uar_sz in 4KByte pages */
644 pseudo_bit_t reserved2[0x0000a];
646 pseudo_bit_t reserved3[0x00020];
648 pseudo_bit_t uar_scratch_base_addr_h[0x00020];/* Base address of UAR scratchpad [63:32].
649 Number of entries in table is 2^log_max_uars.
650 Table must be aligned to its size */
652 pseudo_bit_t uar_scratch_base_addr_l[0x00020];/* Base address of UAR scratchpad [31:0].
653 Number of entries in table is 2^log_max_uars.
654 Table must be aligned to its size. */
656 pseudo_bit_t uar_context_base_addr_h[0x00020];/* Base address of UAR Context [63:32].
657 Number of entries in table is 2^log_max_uars.
658 Table must be aligned to its size. */
660 pseudo_bit_t uar_context_base_addr_l[0x00020];/* Base address of UAR Context [31:0].
661 Number of entries in table is 2^log_max_uars.
662 Table must be aligned to its size. */
666 /* Translation and Protection Tables Parameters */
668 struct arbelprm_tptparams_st { /* Little Endian */
669 pseudo_bit_t mpt_base_adr_h[0x00020];/* MPT - Memory Protection Table base physical address [63:32].
670 Entry size is 64 bytes.
671 Table must be aligned to its size.
672 Address may be set to 0xFFFFFFFF if address translation and protection is not supported. */
674 pseudo_bit_t mpt_base_adr_l[0x00020];/* MPT - Memory Protection Table base physical address [31:0].
675 Entry size is 64 bytes.
676 Table must be aligned to its size.
677 Address may be set to 0xFFFFFFFF if address translation and protection is not supported. */
679 pseudo_bit_t log_mpt_sz[0x00006]; /* Log (base 2) of the number of region/windows entries in the MPT table. */
680 pseudo_bit_t reserved0[0x00002];
681 pseudo_bit_t pfto[0x00005]; /* Page Fault RNR Timeout -
682 The field returned in RNR Naks generated when a page fault is detected.
683 It has no effect when on-demand-paging is not used. */
684 pseudo_bit_t reserved1[0x00013];
686 pseudo_bit_t reserved2[0x00020];
688 pseudo_bit_t mtt_base_addr_h[0x00020];/* MTT - Memory Translation table base physical address [63:32].
689 Table must be aligned to its size.
690 Address may be set to 0xFFFFFFFF if address translation and protection is not supported. */
692 pseudo_bit_t mtt_base_addr_l[0x00020];/* MTT - Memory Translation table base physical address [31:0].
693 Table must be aligned to its size.
694 Address may be set to 0xFFFFFFFF if address translation and protection is not supported. */
696 pseudo_bit_t reserved3[0x00040];
700 /* Multicast Support Parameters */
702 struct arbelprm_multicastparam_st { /* Little Endian */
703 pseudo_bit_t mc_base_addr_h[0x00020];/* Base Address of the Multicast Table [63:32].
704 The base address must be aligned to the entry size.
705 Address may be set to 0xFFFFFFFF if multicast is not supported. */
707 pseudo_bit_t mc_base_addr_l[0x00020];/* Base Address of the Multicast Table [31:0].
708 The base address must be aligned to the entry size.
709 Address may be set to 0xFFFFFFFF if multicast is not supported. */
711 pseudo_bit_t reserved0[0x00040];
713 pseudo_bit_t log_mc_table_entry_sz[0x00010];/* Log2 of the Size of multicast group member (MGM) entry.
714 Must be greater than 5 (to allow CTRL and GID sections).
715 That implies the number of QPs per MC table entry. */
716 pseudo_bit_t reserved1[0x00010];
718 pseudo_bit_t mc_table_hash_sz[0x00011];/* Number of entries in multicast DGID hash table (must be power of 2)
719 INIT_HCA - the required number of entries
720 QUERY_HCA - the actual number of entries assigned by firmware (will be less than or equal to the amount required in INIT_HCA) */
721 pseudo_bit_t reserved2[0x0000f];
723 pseudo_bit_t log_mc_table_sz[0x00005];/* Log2 of the overall number of MC entries in the MCG table (includes both hash and auxiliary tables) */
724 pseudo_bit_t reserved3[0x00013];
725 pseudo_bit_t mc_hash_fn[0x00003]; /* Multicast hash function
726 0 - Default hash function
728 pseudo_bit_t reserved4[0x00005];
730 pseudo_bit_t reserved5[0x00020];
734 /* QPC/EEC/CQC/EQC/RDB Parameters */
736 struct arbelprm_qpcbaseaddr_st { /* Little Endian */
737 pseudo_bit_t reserved0[0x00080];
739 pseudo_bit_t qpc_base_addr_h[0x00020];/* QPC Base Address [63:32]
740 Table must be aligned on its size */
742 pseudo_bit_t log_num_of_qp[0x00005];/* Log base 2 of number of supported QPs */
743 pseudo_bit_t reserved1[0x00002];
744 pseudo_bit_t qpc_base_addr_l[0x00019];/* QPC Base Address [31:7]
745 Table must be aligned on its size */
747 pseudo_bit_t reserved2[0x00040];
749 pseudo_bit_t eec_base_addr_h[0x00020];/* EEC Base Address [63:32]
750 Table must be aligned on its size.
751 Address may be set to 0xFFFFFFFF if RD is not supported. */
753 pseudo_bit_t log_num_of_ee[0x00005];/* Log base 2 of number of supported EEs. */
754 pseudo_bit_t reserved3[0x00002];
755 pseudo_bit_t eec_base_addr_l[0x00019];/* EEC Base Address [31:7]
756 Table must be aligned on its size
757 Address may be set to 0xFFFFFFFF if RD is not supported. */
759 pseudo_bit_t srqc_base_addr_h[0x00020];/* SRQ Context Base Address [63:32]
760 Table must be aligned on its size
761 Address may be set to 0xFFFFFFFF if SRQ is not supported. */
763 pseudo_bit_t log_num_of_srq[0x00005];/* Log base 2 of number of supported SRQs. */
764 pseudo_bit_t srqc_base_addr_l[0x0001b];/* SRQ Context Base Address [31:5]
765 Table must be aligned on its size
766 Address may be set to 0xFFFFFFFF if SRQ is not supported. */
768 pseudo_bit_t cqc_base_addr_h[0x00020];/* CQC Base Address [63:32]
769 Table must be aligned on its size */
771 pseudo_bit_t log_num_of_cq[0x00005];/* Log base 2 of number of supported CQs. */
772 pseudo_bit_t reserved4[0x00001];
773 pseudo_bit_t cqc_base_addr_l[0x0001a];/* CQC Base Address [31:6]
774 Table must be aligned on its size */
776 pseudo_bit_t reserved5[0x00040];
778 pseudo_bit_t eqpc_base_addr_h[0x00020];/* Extended QPC Base Address [63:32]
779 Table has same number of entries as QPC table.
780 Table must be aligned to entry size. */
782 pseudo_bit_t eqpc_base_addr_l[0x00020];/* Extended QPC Base Address [31:0]
783 Table has same number of entries as QPC table.
784 Table must be aligned to entry size. */
786 pseudo_bit_t reserved6[0x00040];
788 pseudo_bit_t eeec_base_addr_h[0x00020];/* Extended EEC Base Address [63:32]
789 Table has same number of entries as EEC table.
790 Table must be aligned to entry size.
791 Address may be set to 0xFFFFFFFF if RD is not supported. */
793 pseudo_bit_t eeec_base_addr_l[0x00020];/* Extended EEC Base Address [31:0]
794 Table has same number of entries as EEC table.
795 Table must be aligned to entry size.
796 Address may be set to 0xFFFFFFFF if RD is not supported. */
798 pseudo_bit_t reserved7[0x00040];
800 pseudo_bit_t eqc_base_addr_h[0x00020];/* EQC Base Address [63:32]
801 Address may be set to 0xFFFFFFFF if EQs are not supported.
802 Table must be aligned to entry size. */
804 pseudo_bit_t log_num_eq[0x00004]; /* Log base 2 of number of supported EQs.
805 Must be 6 or less in InfiniHost-III-EX. */
806 pseudo_bit_t reserved8[0x00002];
807 pseudo_bit_t eqc_base_addr_l[0x0001a];/* EQC Base Address [31:6]
808 Address may be set to 0xFFFFFFFF if EQs are not supported.
809 Table must be aligned to entry size. */
811 pseudo_bit_t reserved9[0x00040];
813 pseudo_bit_t rdb_base_addr_h[0x00020];/* Base address of table that holds remote read and remote atomic requests [63:32].
814 Address may be set to 0xFFFFFFFF if remote RDMA reads are not supported.
815 Please refer to QP and EE chapter for further explanation on RDB allocation. */
817 pseudo_bit_t rdb_base_addr_l[0x00020];/* Base address of table that holds remote read and remote atomic requests [31:0].
818 Table must be aligned to RDB entry size (32 bytes).
819 Address may be set to zero if remote RDMA reads are not supported.
820 Please refer to QP and EE chapter for further explanation on RDB allocation. */
822 pseudo_bit_t reserved10[0x00040];
826 /* Header_Log_Register */
828 struct arbelprm_header_log_register_st { /* Little Endian */
829 pseudo_bit_t place_holder[0x00020];
831 pseudo_bit_t reserved0[0x00060];
835 /* Performance Monitors */
837 struct arbelprm_performance_monitors_st { /* Little Endian */
838 pseudo_bit_t e0[0x00001]; /* Enables counting of respective performance counter */
839 pseudo_bit_t e1[0x00001]; /* Enables counting of respective performance counter */
840 pseudo_bit_t e2[0x00001]; /* Enables counting of respective performance counter */
841 pseudo_bit_t reserved0[0x00001];
842 pseudo_bit_t r0[0x00001]; /* If written to as '1 - resets respective performance counter, if written to az '0 - no change to matter */
843 pseudo_bit_t r1[0x00001]; /* If written to as '1 - resets respective performance counter, if written to az '0 - no change to matter */
844 pseudo_bit_t r2[0x00001]; /* If written to as '1 - resets respective performance counter, if written to az '0 - no change to matter */
845 pseudo_bit_t reserved1[0x00001];
846 pseudo_bit_t i0[0x00001]; /* Interrupt enable on respective counter overflow. '1 - interrupt enabled, '0 - interrupt disabled. */
847 pseudo_bit_t i1[0x00001]; /* Interrupt enable on respective counter overflow. '1 - interrupt enabled, '0 - interrupt disabled. */
848 pseudo_bit_t i2[0x00001]; /* Interrupt enable on respective counter overflow. '1 - interrupt enabled, '0 - interrupt disabled. */
849 pseudo_bit_t reserved2[0x00001];
850 pseudo_bit_t f0[0x00001]; /* Overflow flag. If set, overflow occurred on respective counter. Cleared if written to as '1 */
851 pseudo_bit_t f1[0x00001]; /* Overflow flag. If set, overflow occurred on respective counter. Cleared if written to as '1 */
852 pseudo_bit_t f2[0x00001]; /* Overflow flag. If set, overflow occurred on respective counter. Cleared if written to as '1 */
853 pseudo_bit_t reserved3[0x00001];
854 pseudo_bit_t ev_cnt1[0x00005]; /* Specifies event to be counted by Event_counter1 See XXX for events' definition. */
855 pseudo_bit_t reserved4[0x00003];
856 pseudo_bit_t ev_cnt2[0x00005]; /* Specifies event to be counted by Event_counter2 See XXX for events' definition. */
857 pseudo_bit_t reserved5[0x00003];
859 pseudo_bit_t clock_counter[0x00020];
861 pseudo_bit_t event_counter1[0x00020];
863 pseudo_bit_t event_counter2[0x00020];/* Read/write event counter, counting events specified by EvCntl and EvCnt2 fields repsectively. When the event counter reaches is maximum value of 0xFFFFFF, the next event will cause it to roll over to zero, set F1 or F2 bit respectively and generate interrupt by I1 I2 bit respectively. */
867 /* Receive segment format */
869 struct arbelprm_wqe_segment_ctrl_recv_st { /* Little Endian */
870 struct arbelprm_recv_wqe_segment_next_st wqe_segment_next;
872 pseudo_bit_t reserved0[0x00002];
873 pseudo_bit_t reserved1[0x00001];
874 pseudo_bit_t reserved2[0x00001];
875 pseudo_bit_t reserved3[0x0001c];
877 pseudo_bit_t reserved4[0x00020];
881 /* MLX WQE segment format */
883 struct arbelprm_wqe_segment_ctrl_mlx_st { /* Little Endian */
884 pseudo_bit_t reserved0[0x00002];
885 pseudo_bit_t e[0x00001]; /* WQE event */
886 pseudo_bit_t c[0x00001]; /* Create CQE (for "requested signalling" QP) */
887 pseudo_bit_t icrc[0x00002]; /* icrc field detemines what to do with the last dword of the packet: 0 - Calculate ICRC and put it instead of last dword. Last dword must be 0x0. 1,2 - reserved. 3 - Leave last dword as is. Last dword must not be 0x0. */
888 pseudo_bit_t reserved1[0x00002];
889 pseudo_bit_t sl[0x00004];
890 pseudo_bit_t max_statrate[0x00004];
891 pseudo_bit_t slr[0x00001]; /* 0= take slid from port. 1= take slid from given headers */
892 pseudo_bit_t v15[0x00001]; /* Send packet over VL15 */
893 pseudo_bit_t reserved2[0x0000e];
895 pseudo_bit_t vcrc[0x00010]; /* Packet's VCRC (if not 0 - otherwise computed by HW) */
896 pseudo_bit_t rlid[0x00010]; /* Destination LID (must match given headers) */
900 /* Send WQE segment format */
902 struct arbelprm_send_wqe_segment_st { /* Little Endian */
903 struct arbelprm_wqe_segment_next_st wqe_segment_next;/* Send wqe segment next */
905 struct arbelprm_wqe_segment_ctrl_send_st wqe_segment_ctrl_send;/* Send wqe segment ctrl */
907 struct arbelprm_wqe_segment_rd_st wqe_segment_rd;/* Send wqe segment rd */
909 struct arbelprm_wqe_segment_ud_st wqe_segment_ud;/* Send wqe segment ud */
911 struct arbelprm_wqe_segment_bind_st wqe_segment_bind;/* Send wqe segment bind */
913 pseudo_bit_t reserved0[0x00180];
915 struct arbelprm_wqe_segment_remote_address_st wqe_segment_remote_address;/* Send wqe segment remote address */
917 struct arbelprm_wqe_segment_atomic_st wqe_segment_atomic;/* Send wqe segment atomic */
919 struct arbelprm_fast_registration_segment_st fast_registration_segment;/* Fast Registration Segment */
921 struct arbelprm_local_invalidate_segment_st local_invalidate_segment;/* local invalidate segment */
923 struct arbelprm_wqe_segment_data_ptr_st wqe_segment_data_ptr;/* Send wqe segment data ptr */
925 struct arbelprm_wqe_segment_data_inline_st wqe_segment_data_inline;/* Send wqe segment data inline */
927 pseudo_bit_t reserved1[0x00200];
931 /* QP and EE Context Entry */
933 struct arbelprm_queue_pair_ee_context_entry_st { /* Little Endian */
934 pseudo_bit_t reserved0[0x00008];
935 pseudo_bit_t de[0x00001]; /* Send/Receive Descriptor Event enable - if set, events can be generated upon descriptors' completion on send/receive queue (controlled by E bit in WQE). Invalid in EE context */
936 pseudo_bit_t reserved1[0x00002];
937 pseudo_bit_t pm_state[0x00002]; /* Path migration state (Migrated, Armed or Rearm)
942 Should be set to 11 for UD QPs and for QPs which do not support APM */
943 pseudo_bit_t reserved2[0x00003];
944 pseudo_bit_t st[0x00003]; /* Service type (invalid in EE context):
945 000-Reliable Connection
946 001-Unreliable Connection
947 010-Reliable Datagram
948 011-Unreliable Datagram
949 111-MLX transport (raw bits injection). Used for management QPs and RAW */
950 pseudo_bit_t reserved3[0x00009];
951 pseudo_bit_t state[0x00004]; /* QP/EE state:
957 5 - SQD (Send Queue Drained)
959 7 - Send Queue Draining
963 (Valid for QUERY_QPEE and ERR2RST_QPEE commands only) */
965 pseudo_bit_t reserved4[0x00020];
967 pseudo_bit_t sched_queue[0x00004]; /* Schedule queue to be used for WQE scheduling to execution. Determines QOS for this QP. */
968 pseudo_bit_t rlky[0x00001]; /* When set this QP can use the Reserved L_Key */
969 pseudo_bit_t reserved5[0x00003];
970 pseudo_bit_t log_sq_stride[0x00003];/* Stride on the send queue. WQ entry is 16*(2^log_SQ_stride) bytes.
971 Stride must be equal or bigger then 64 bytes (minimum log_RQ_stride value allowed is 2). */
972 pseudo_bit_t log_sq_size[0x00004]; /* Log2 of the Number of WQEs in the Send Queue. */
973 pseudo_bit_t reserved6[0x00001];
974 pseudo_bit_t log_rq_stride[0x00003];/* Stride on the receive queue. WQ entry is 16*(2^log_RQ_stride) bytes.
975 Stride must be equal or bigger then 64 bytes (minimum log_RQ_stride value allowed is 2). */
976 pseudo_bit_t log_rq_size[0x00004]; /* Log2 of the Number of WQEs in the Receive Queue. */
977 pseudo_bit_t reserved7[0x00001];
978 pseudo_bit_t msg_max[0x00005]; /* Max message size allowed on the QP. Maximum message size is 2^msg_Max.
979 Must be equal to MTU for UD and MLX QPs. */
980 pseudo_bit_t mtu[0x00003]; /* MTU of the QP (Must be the same for both paths: primary and alternative):
987 Should be configured to 0x4 for UD and MLX QPs. */
989 pseudo_bit_t usr_page[0x00018]; /* QP (see "non_privileged Access to the HCA Hardware"). Not valid (reserved) in EE context. */
990 pseudo_bit_t reserved8[0x00008];
992 pseudo_bit_t local_qpn_een[0x00018];/* Local QP/EE number Lower bits determine position of this record in QPC table, and - thus - constrained
993 This field is valid for QUERY and ERR2RST commands only. */
994 pseudo_bit_t reserved9[0x00008];
996 pseudo_bit_t remote_qpn_een[0x00018];/* Remote QP/EE number */
997 pseudo_bit_t reserved10[0x00008];
999 pseudo_bit_t reserved11[0x00040];
1000 /* -------------- */
1001 struct arbelprm_address_path_st primary_address_path;/* Primary address path for the QP/EE */
1002 /* -------------- */
1003 struct arbelprm_address_path_st alternative_address_path;/* Alternate address path for the QP/EE */
1004 /* -------------- */
1005 pseudo_bit_t rdd[0x00018]; /* Reliable Datagram Domain */
1006 pseudo_bit_t reserved12[0x00008];
1007 /* -------------- */
1008 pseudo_bit_t pd[0x00018]; /* QP protection domain. Not valid (reserved) in EE context. */
1009 pseudo_bit_t reserved13[0x00008];
1010 /* -------------- */
1011 pseudo_bit_t wqe_base_adr_h[0x00020];/* Bits 63:32 of WQE address for both SQ and RQ.
1012 Reserved for EE context. */
1013 /* -------------- */
1014 pseudo_bit_t wqe_lkey[0x00020]; /* memory key (L-Key) to be used to access WQEs. Not valid (reserved) in EE context. */
1015 /* -------------- */
1016 pseudo_bit_t reserved14[0x00003];
1017 pseudo_bit_t ssc[0x00001]; /* Send Signaled Completion
1018 1 - all send WQEs generate CQEs.
1019 0 - only send WQEs with C bit set generate completion.
1020 Not valid (reserved) in EE context. */
1021 pseudo_bit_t sic[0x00001]; /* If set - Ignore end to end credits on send queue. Not valid (reserved) in EE context. */
1022 pseudo_bit_t cur_retry_cnt[0x00003];/* Current transport retry counter (QUERY_QPEE only).
1023 The current transport retry counter can vary from retry_count down to 1, where 1 means that the last retry attempt is currently executing. */
1024 pseudo_bit_t cur_rnr_retry[0x00003];/* Current RNR retry counter (QUERY_QPEE only).
1025 The current RNR retry counter can vary from rnr_retry to 1, where 1 means that the last retry attempt is currently executing. */
1026 pseudo_bit_t fre[0x00001]; /* Fast Registration Work Request Enabled. (Reserved for EE) */
1027 pseudo_bit_t reserved15[0x00001];
1028 pseudo_bit_t sae[0x00001]; /* If set - Atomic operations enabled on send queue. Not valid (reserved) in EE context. */
1029 pseudo_bit_t swe[0x00001]; /* If set - RDMA - write enabled on send queue. Not valid (reserved) in EE context. */
1030 pseudo_bit_t sre[0x00001]; /* If set - RDMA - read enabled on send queue. Not valid (reserved) in EE context. */
1031 pseudo_bit_t retry_count[0x00003]; /* Transport timeout Retry count */
1032 pseudo_bit_t reserved16[0x00002];
1033 pseudo_bit_t sra_max[0x00003]; /* Maximum number of outstanding RDMA-read/Atomic operations allowed in the send queue. Maximum number is 2^SRA_Max. Must be zero in EE context. */
1034 pseudo_bit_t flight_lim[0x00004]; /* Number of outstanding (in-flight) messages on the wire allowed for this send queue.
1035 Number of outstanding messages is 2^Flight_Lim.
1036 Use 0xF for unlimited number of outstanding messages. */
1037 pseudo_bit_t ack_req_freq[0x00004]; /* ACK required frequency. ACK required bit will be set in every 2^AckReqFreq packets at least. Not valid for RD QP. */
1038 /* -------------- */
1039 pseudo_bit_t reserved17[0x00020];
1040 /* -------------- */
1041 pseudo_bit_t next_send_psn[0x00018];/* Next PSN to be sent */
1042 pseudo_bit_t reserved18[0x00008];
1043 /* -------------- */
1044 pseudo_bit_t cqn_snd[0x00018]; /* CQ number completions from the send queue to be reported to. Not valid (reserved) in EE context. */
1045 pseudo_bit_t reserved19[0x00008];
1046 /* -------------- */
1047 pseudo_bit_t reserved20[0x00006];
1048 pseudo_bit_t snd_wqe_base_adr_l[0x0001a];/* While opening (creating) the WQ, this field should contain the address of first descriptor to be posted. Not valid (reserved) in EE context. */
1049 /* -------------- */
1050 pseudo_bit_t snd_db_record_index[0x00020];/* Index in the UAR Context Table Entry.
1051 HW uses this index as an offset from the UAR Context Table Entry in order to read this SQ doorbell record.
1052 The entry is obtained via the usr_page field.
1053 Not valid for EE. */
1054 /* -------------- */
1055 pseudo_bit_t last_acked_psn[0x00018];/* The last acknowledged PSN for the requester (QUERY_QPEE only) */
1056 pseudo_bit_t reserved21[0x00008];
1057 /* -------------- */
1058 pseudo_bit_t ssn[0x00018]; /* Requester Send Sequence Number (QUERY_QPEE only) */
1059 pseudo_bit_t reserved22[0x00008];
1060 /* -------------- */
1061 pseudo_bit_t reserved23[0x00003];
1062 pseudo_bit_t rsc[0x00001]; /* 1 - all receive WQEs generate CQEs.
1063 0 - only receive WQEs with C bit set generate completion.
1064 Not valid (reserved) in EE context.
1066 pseudo_bit_t ric[0x00001]; /* Invalid Credits.
1067 1 - place "Invalid Credits" to ACKs sent from this queue.
1068 0 - ACKs report the actual number of end to end credits on the connection.
1069 Not valid (reserved) in EE context.
1070 Must be set to 1 on QPs which are attached to SRQ. */
1071 pseudo_bit_t reserved24[0x00008];
1072 pseudo_bit_t rae[0x00001]; /* If set - Atomic operations enabled. on receive queue. Not valid (reserved) in EE context. */
1073 pseudo_bit_t rwe[0x00001]; /* If set - RDMA - write enabled on receive queue. Not valid (reserved) in EE context. */
1074 pseudo_bit_t rre[0x00001]; /* If set - RDMA - read enabled on receive queue. Not valid (reserved) in EE context. */
1075 pseudo_bit_t reserved25[0x00005];
1076 pseudo_bit_t rra_max[0x00003]; /* Maximum number of outstanding RDMA-read/Atomic operations allowed on receive queue is 2^RRA_Max.
1077 Must be 0 for EE context. */
1078 pseudo_bit_t reserved26[0x00008];
1079 /* -------------- */
1080 pseudo_bit_t next_rcv_psn[0x00018]; /* Next (expected) PSN on receive */
1081 pseudo_bit_t min_rnr_nak[0x00005]; /* Minimum RNR NAK timer value (TTTTT field encoding according to the IB spec Vol1 9.7.5.2.8).
1082 Not valid (reserved) in EE context. */
1083 pseudo_bit_t reserved27[0x00003];
1084 /* -------------- */
1085 pseudo_bit_t reserved28[0x00005];
1086 pseudo_bit_t ra_buff_indx[0x0001b]; /* Index to outstanding read/atomic buffer.
1087 This field constructs the address to the RDB for maintaining the incoming RDMA read and atomic requests. */
1088 /* -------------- */
1089 pseudo_bit_t cqn_rcv[0x00018]; /* CQ number completions from receive queue to be reported to. Not valid (reserved) in EE context. */
1090 pseudo_bit_t reserved29[0x00008];
1091 /* -------------- */
1092 pseudo_bit_t reserved30[0x00006];
1093 pseudo_bit_t rcv_wqe_base_adr_l[0x0001a];/* While opening (creating) the WQ, this field should contain the address of first descriptor to be posted. Not valid (reserved) in EE context. */
1094 /* -------------- */
1095 pseudo_bit_t rcv_db_record_index[0x00020];/* Index in the UAR Context Table Entry containing the doorbell record for the receive queue.
1096 HW uses this index as an offset from the UAR Context Table Entry in order to read this RQ doorbell record.
1097 The entry is obtained via the usr_page field.
1098 Not valid for EE. */
1099 /* -------------- */
1100 pseudo_bit_t q_key[0x00020]; /* Q_Key to be validated against received datagrams.
1101 On send datagrams, if Q_Key[31] specified in the WQE is set, then this Q_Key will be transmitted in the outgoing message.
1102 Not valid (reserved) in EE context. */
1103 /* -------------- */
1104 pseudo_bit_t srqn[0x00018]; /* SRQN - Shared Receive Queue Number - specifies the SRQ number from which the QP dequeues receive descriptors.
1105 SRQN is valid only if SRQ bit is set. Not valid (reserved) in EE context. */
1106 pseudo_bit_t srq[0x00001]; /* SRQ - Shared Receive Queue. If this bit is set, then the QP is associated with a SRQ. Not valid (reserved) in EE context. */
1107 pseudo_bit_t reserved31[0x00007];
1108 /* -------------- */
1109 pseudo_bit_t rmsn[0x00018]; /* Responder current message sequence number (QUERY_QPEE only) */
1110 pseudo_bit_t reserved32[0x00008];
1111 /* -------------- */
1112 pseudo_bit_t sq_wqe_counter[0x00010];/* A 16bits counter that is incremented for each WQE posted to the SQ.
1113 Must be 0x0 in SQ initialization.
1114 (QUERY_QPEE only). */
1115 pseudo_bit_t rq_wqe_counter[0x00010];/* A 16bits counter that is incremented for each WQE posted to the RQ.
1116 Must be 0x0 in RQ initialization.
1117 (QUERY_QPEE only). */
1118 /* -------------- */
1119 pseudo_bit_t reserved33[0x00040];
1120 /* -------------- */
1123 /* Clear Interrupt [63:0] */
1125 struct arbelprm_clr_int_st { /* Little Endian */
1126 pseudo_bit_t clr_int_h[0x00020]; /* Clear Interrupt [63:32]
1127 Write transactions to this register will clear (de-assert) the virtual interrupt output pins of InfiniHost-III-EX. The value to be written in this register is obtained by executing QUERY_ADAPTER command on command interface after system boot.
1128 This register is write-only. Reading from this register will cause undefined result
1130 /* -------------- */
1131 pseudo_bit_t clr_int_l[0x00020]; /* Clear Interrupt [31:0]
1132 Write transactions to this register will clear (de-assert) the virtual interrupt output pins of InfiniHost-III-EX. The value to be written in this register is obtained by executing QUERY_ADAPTER command on command interface after system boot.
1133 This register is write-only. Reading from this register will cause undefined result */
1134 /* -------------- */
1137 /* EQ_Arm_DB_Region */
1139 struct arbelprm_eq_arm_db_region_st { /* Little Endian */
1140 pseudo_bit_t eq_x_arm_h[0x00020]; /* EQ[63:32] X state.
1141 This register is used to Arm EQs when setting the appropriate bits. */
1142 /* -------------- */
1143 pseudo_bit_t eq_x_arm_l[0x00020]; /* EQ[31:0] X state.
1144 This register is used to Arm EQs when setting the appropriate bits. */
1145 /* -------------- */
1148 /* EQ Set CI DBs Table */
1150 struct arbelprm_eq_set_ci_table_st { /* Little Endian */
1151 pseudo_bit_t eq0_set_ci[0x00020]; /* EQ0_Set_CI */
1152 /* -------------- */
1153 pseudo_bit_t reserved0[0x00020];
1154 /* -------------- */
1155 pseudo_bit_t eq1_set_ci[0x00020]; /* EQ1_Set_CI */
1156 /* -------------- */
1157 pseudo_bit_t reserved1[0x00020];
1158 /* -------------- */
1159 pseudo_bit_t eq2_set_ci[0x00020]; /* EQ2_Set_CI */
1160 /* -------------- */
1161 pseudo_bit_t reserved2[0x00020];
1162 /* -------------- */
1163 pseudo_bit_t eq3_set_ci[0x00020]; /* EQ3_Set_CI */
1164 /* -------------- */
1165 pseudo_bit_t reserved3[0x00020];
1166 /* -------------- */
1167 pseudo_bit_t eq4_set_ci[0x00020]; /* EQ4_Set_CI */
1168 /* -------------- */
1169 pseudo_bit_t reserved4[0x00020];
1170 /* -------------- */
1171 pseudo_bit_t eq5_set_ci[0x00020]; /* EQ5_Set_CI */
1172 /* -------------- */
1173 pseudo_bit_t reserved5[0x00020];
1174 /* -------------- */
1175 pseudo_bit_t eq6_set_ci[0x00020]; /* EQ6_Set_CI */
1176 /* -------------- */
1177 pseudo_bit_t reserved6[0x00020];
1178 /* -------------- */
1179 pseudo_bit_t eq7_set_ci[0x00020]; /* EQ7_Set_CI */
1180 /* -------------- */
1181 pseudo_bit_t reserved7[0x00020];
1182 /* -------------- */
1183 pseudo_bit_t eq8_set_ci[0x00020]; /* EQ8_Set_CI */
1184 /* -------------- */
1185 pseudo_bit_t reserved8[0x00020];
1186 /* -------------- */
1187 pseudo_bit_t eq9_set_ci[0x00020]; /* EQ9_Set_CI */
1188 /* -------------- */
1189 pseudo_bit_t reserved9[0x00020];
1190 /* -------------- */
1191 pseudo_bit_t eq10_set_ci[0x00020]; /* EQ10_Set_CI */
1192 /* -------------- */
1193 pseudo_bit_t reserved10[0x00020];
1194 /* -------------- */
1195 pseudo_bit_t eq11_set_ci[0x00020]; /* EQ11_Set_CI */
1196 /* -------------- */
1197 pseudo_bit_t reserved11[0x00020];
1198 /* -------------- */
1199 pseudo_bit_t eq12_set_ci[0x00020]; /* EQ12_Set_CI */
1200 /* -------------- */
1201 pseudo_bit_t reserved12[0x00020];
1202 /* -------------- */
1203 pseudo_bit_t eq13_set_ci[0x00020]; /* EQ13_Set_CI */
1204 /* -------------- */
1205 pseudo_bit_t reserved13[0x00020];
1206 /* -------------- */
1207 pseudo_bit_t eq14_set_ci[0x00020]; /* EQ14_Set_CI */
1208 /* -------------- */
1209 pseudo_bit_t reserved14[0x00020];
1210 /* -------------- */
1211 pseudo_bit_t eq15_set_ci[0x00020]; /* EQ15_Set_CI */
1212 /* -------------- */
1213 pseudo_bit_t reserved15[0x00020];
1214 /* -------------- */
1215 pseudo_bit_t eq16_set_ci[0x00020]; /* EQ16_Set_CI */
1216 /* -------------- */
1217 pseudo_bit_t reserved16[0x00020];
1218 /* -------------- */
1219 pseudo_bit_t eq17_set_ci[0x00020]; /* EQ17_Set_CI */
1220 /* -------------- */
1221 pseudo_bit_t reserved17[0x00020];
1222 /* -------------- */
1223 pseudo_bit_t eq18_set_ci[0x00020]; /* EQ18_Set_CI */
1224 /* -------------- */
1225 pseudo_bit_t reserved18[0x00020];
1226 /* -------------- */
1227 pseudo_bit_t eq19_set_ci[0x00020]; /* EQ19_Set_CI */
1228 /* -------------- */
1229 pseudo_bit_t reserved19[0x00020];
1230 /* -------------- */
1231 pseudo_bit_t eq20_set_ci[0x00020]; /* EQ20_Set_CI */
1232 /* -------------- */
1233 pseudo_bit_t reserved20[0x00020];
1234 /* -------------- */
1235 pseudo_bit_t eq21_set_ci[0x00020]; /* EQ21_Set_CI */
1236 /* -------------- */
1237 pseudo_bit_t reserved21[0x00020];
1238 /* -------------- */
1239 pseudo_bit_t eq22_set_ci[0x00020]; /* EQ22_Set_CI */
1240 /* -------------- */
1241 pseudo_bit_t reserved22[0x00020];
1242 /* -------------- */
1243 pseudo_bit_t eq23_set_ci[0x00020]; /* EQ23_Set_CI */
1244 /* -------------- */
1245 pseudo_bit_t reserved23[0x00020];
1246 /* -------------- */
1247 pseudo_bit_t eq24_set_ci[0x00020]; /* EQ24_Set_CI */
1248 /* -------------- */
1249 pseudo_bit_t reserved24[0x00020];
1250 /* -------------- */
1251 pseudo_bit_t eq25_set_ci[0x00020]; /* EQ25_Set_CI */
1252 /* -------------- */
1253 pseudo_bit_t reserved25[0x00020];
1254 /* -------------- */
1255 pseudo_bit_t eq26_set_ci[0x00020]; /* EQ26_Set_CI */
1256 /* -------------- */
1257 pseudo_bit_t reserved26[0x00020];
1258 /* -------------- */
1259 pseudo_bit_t eq27_set_ci[0x00020]; /* EQ27_Set_CI */
1260 /* -------------- */
1261 pseudo_bit_t reserved27[0x00020];
1262 /* -------------- */
1263 pseudo_bit_t eq28_set_ci[0x00020]; /* EQ28_Set_CI */
1264 /* -------------- */
1265 pseudo_bit_t reserved28[0x00020];
1266 /* -------------- */
1267 pseudo_bit_t eq29_set_ci[0x00020]; /* EQ29_Set_CI */
1268 /* -------------- */
1269 pseudo_bit_t reserved29[0x00020];
1270 /* -------------- */
1271 pseudo_bit_t eq30_set_ci[0x00020]; /* EQ30_Set_CI */
1272 /* -------------- */
1273 pseudo_bit_t reserved30[0x00020];
1274 /* -------------- */
1275 pseudo_bit_t eq31_set_ci[0x00020]; /* EQ31_Set_CI */
1276 /* -------------- */
1277 pseudo_bit_t reserved31[0x00020];
1278 /* -------------- */
1279 pseudo_bit_t eq32_set_ci[0x00020]; /* EQ32_Set_CI */
1280 /* -------------- */
1281 pseudo_bit_t reserved32[0x00020];
1282 /* -------------- */
1283 pseudo_bit_t eq33_set_ci[0x00020]; /* EQ33_Set_CI */
1284 /* -------------- */
1285 pseudo_bit_t reserved33[0x00020];
1286 /* -------------- */
1287 pseudo_bit_t eq34_set_ci[0x00020]; /* EQ34_Set_CI */
1288 /* -------------- */
1289 pseudo_bit_t reserved34[0x00020];
1290 /* -------------- */
1291 pseudo_bit_t eq35_set_ci[0x00020]; /* EQ35_Set_CI */
1292 /* -------------- */
1293 pseudo_bit_t reserved35[0x00020];
1294 /* -------------- */
1295 pseudo_bit_t eq36_set_ci[0x00020]; /* EQ36_Set_CI */
1296 /* -------------- */
1297 pseudo_bit_t reserved36[0x00020];
1298 /* -------------- */
1299 pseudo_bit_t eq37_set_ci[0x00020]; /* EQ37_Set_CI */
1300 /* -------------- */
1301 pseudo_bit_t reserved37[0x00020];
1302 /* -------------- */
1303 pseudo_bit_t eq38_set_ci[0x00020]; /* EQ38_Set_CI */
1304 /* -------------- */
1305 pseudo_bit_t reserved38[0x00020];
1306 /* -------------- */
1307 pseudo_bit_t eq39_set_ci[0x00020]; /* EQ39_Set_CI */
1308 /* -------------- */
1309 pseudo_bit_t reserved39[0x00020];
1310 /* -------------- */
1311 pseudo_bit_t eq40_set_ci[0x00020]; /* EQ40_Set_CI */
1312 /* -------------- */
1313 pseudo_bit_t reserved40[0x00020];
1314 /* -------------- */
1315 pseudo_bit_t eq41_set_ci[0x00020]; /* EQ41_Set_CI */
1316 /* -------------- */
1317 pseudo_bit_t reserved41[0x00020];
1318 /* -------------- */
1319 pseudo_bit_t eq42_set_ci[0x00020]; /* EQ42_Set_CI */
1320 /* -------------- */
1321 pseudo_bit_t reserved42[0x00020];
1322 /* -------------- */
1323 pseudo_bit_t eq43_set_ci[0x00020]; /* EQ43_Set_CI */
1324 /* -------------- */
1325 pseudo_bit_t reserved43[0x00020];
1326 /* -------------- */
1327 pseudo_bit_t eq44_set_ci[0x00020]; /* EQ44_Set_CI */
1328 /* -------------- */
1329 pseudo_bit_t reserved44[0x00020];
1330 /* -------------- */
1331 pseudo_bit_t eq45_set_ci[0x00020]; /* EQ45_Set_CI */
1332 /* -------------- */
1333 pseudo_bit_t reserved45[0x00020];
1334 /* -------------- */
1335 pseudo_bit_t eq46_set_ci[0x00020]; /* EQ46_Set_CI */
1336 /* -------------- */
1337 pseudo_bit_t reserved46[0x00020];
1338 /* -------------- */
1339 pseudo_bit_t eq47_set_ci[0x00020]; /* EQ47_Set_CI */
1340 /* -------------- */
1341 pseudo_bit_t reserved47[0x00020];
1342 /* -------------- */
1343 pseudo_bit_t eq48_set_ci[0x00020]; /* EQ48_Set_CI */
1344 /* -------------- */
1345 pseudo_bit_t reserved48[0x00020];
1346 /* -------------- */
1347 pseudo_bit_t eq49_set_ci[0x00020]; /* EQ49_Set_CI */
1348 /* -------------- */
1349 pseudo_bit_t reserved49[0x00020];
1350 /* -------------- */
1351 pseudo_bit_t eq50_set_ci[0x00020]; /* EQ50_Set_CI */
1352 /* -------------- */
1353 pseudo_bit_t reserved50[0x00020];
1354 /* -------------- */
1355 pseudo_bit_t eq51_set_ci[0x00020]; /* EQ51_Set_CI */
1356 /* -------------- */
1357 pseudo_bit_t reserved51[0x00020];
1358 /* -------------- */
1359 pseudo_bit_t eq52_set_ci[0x00020]; /* EQ52_Set_CI */
1360 /* -------------- */
1361 pseudo_bit_t reserved52[0x00020];
1362 /* -------------- */
1363 pseudo_bit_t eq53_set_ci[0x00020]; /* EQ53_Set_CI */
1364 /* -------------- */
1365 pseudo_bit_t reserved53[0x00020];
1366 /* -------------- */
1367 pseudo_bit_t eq54_set_ci[0x00020]; /* EQ54_Set_CI */
1368 /* -------------- */
1369 pseudo_bit_t reserved54[0x00020];
1370 /* -------------- */
1371 pseudo_bit_t eq55_set_ci[0x00020]; /* EQ55_Set_CI */
1372 /* -------------- */
1373 pseudo_bit_t reserved55[0x00020];
1374 /* -------------- */
1375 pseudo_bit_t eq56_set_ci[0x00020]; /* EQ56_Set_CI */
1376 /* -------------- */
1377 pseudo_bit_t reserved56[0x00020];
1378 /* -------------- */
1379 pseudo_bit_t eq57_set_ci[0x00020]; /* EQ57_Set_CI */
1380 /* -------------- */
1381 pseudo_bit_t reserved57[0x00020];
1382 /* -------------- */
1383 pseudo_bit_t eq58_set_ci[0x00020]; /* EQ58_Set_CI */
1384 /* -------------- */
1385 pseudo_bit_t reserved58[0x00020];
1386 /* -------------- */
1387 pseudo_bit_t eq59_set_ci[0x00020]; /* EQ59_Set_CI */
1388 /* -------------- */
1389 pseudo_bit_t reserved59[0x00020];
1390 /* -------------- */
1391 pseudo_bit_t eq60_set_ci[0x00020]; /* EQ60_Set_CI */
1392 /* -------------- */
1393 pseudo_bit_t reserved60[0x00020];
1394 /* -------------- */
1395 pseudo_bit_t eq61_set_ci[0x00020]; /* EQ61_Set_CI */
1396 /* -------------- */
1397 pseudo_bit_t reserved61[0x00020];
1398 /* -------------- */
1399 pseudo_bit_t eq62_set_ci[0x00020]; /* EQ62_Set_CI */
1400 /* -------------- */
1401 pseudo_bit_t reserved62[0x00020];
1402 /* -------------- */
1403 pseudo_bit_t eq63_set_ci[0x00020]; /* EQ63_Set_CI */
1404 /* -------------- */
1405 pseudo_bit_t reserved63[0x00020];
1406 /* -------------- */
1409 /* InfiniHost-III-EX Configuration Registers */
1411 struct arbelprm_configuration_registers_st { /* Little Endian */
1412 pseudo_bit_t reserved0[0x403400];
1413 /* -------------- */
1414 struct arbelprm_hca_command_register_st hca_command_interface_register;/* HCA Command Register */
1415 /* -------------- */
1416 pseudo_bit_t reserved1[0x3fcb20];
1417 /* -------------- */
1422 struct arbelprm_qp_db_record_st { /* Little Endian */
1423 pseudo_bit_t counter[0x00010]; /* Modulo-64K counter of WQEs posted to the QP since its creation. Should be initialized to zero. */
1424 pseudo_bit_t reserved0[0x00010];
1425 /* -------------- */
1426 pseudo_bit_t reserved1[0x00005];
1427 pseudo_bit_t res[0x00003]; /* 0x3 for SQ
1430 pseudo_bit_t qp_number[0x00018]; /* QP number */
1431 /* -------------- */
1434 /* CQ_ARM_DB_Record */
1436 struct arbelprm_cq_arm_db_record_st { /* Little Endian */
1437 pseudo_bit_t counter[0x00020]; /* CQ counter for the arming request */
1438 /* -------------- */
1439 pseudo_bit_t cmd[0x00003]; /* 0x0 - No command
1440 0x1 - Request notification for next Solicited completion event. Counter filed specifies the current CQ Consumer Counter.
1441 0x2 - Request notification for next Solicited or Unsolicited completion event. Counter filed specifies the current CQ Consumer counter.
1442 0x3 - Request notification for multiple completions (Arm-N). Counter filed specifies the value of the CQ Index that when reached by HW (i.e. HW generates a CQE into this Index) Event will be generated
1444 pseudo_bit_t cmd_sn[0x00002]; /* Command Sequence Number - See Table 35, "CQ Doorbell Layout" for definition of this filed */
1445 pseudo_bit_t res[0x00003]; /* Must be 0x2 */
1446 pseudo_bit_t cq_number[0x00018]; /* CQ number */
1447 /* -------------- */
1450 /* CQ_CI_DB_Record */
1452 struct arbelprm_cq_ci_db_record_st { /* Little Endian */
1453 pseudo_bit_t counter[0x00020]; /* CQ counter */
1454 /* -------------- */
1455 pseudo_bit_t reserved0[0x00005];
1456 pseudo_bit_t res[0x00003]; /* Must be 0x1 */
1457 pseudo_bit_t cq_number[0x00018]; /* CQ number */
1458 /* -------------- */
1461 /* Virtual_Physical_Mapping */
1463 struct arbelprm_virtual_physical_mapping_st { /* Little Endian */
1464 pseudo_bit_t va_h[0x00020]; /* Virtual Address[63:32]. Valid only for MAP_ICM command. */
1465 /* -------------- */
1466 pseudo_bit_t reserved0[0x0000c];
1467 pseudo_bit_t va_l[0x00014]; /* Virtual Address[31:12]. Valid only for MAP_ICM command. */
1468 /* -------------- */
1469 pseudo_bit_t pa_h[0x00020]; /* Physical Address[63:32] */
1470 /* -------------- */
1471 pseudo_bit_t log2size[0x00006]; /* Log2 of the size in 4KB pages of the physical and virtual contiguous memory that starts at PA_L/H and VA_L/H */
1472 pseudo_bit_t reserved1[0x00006];
1473 pseudo_bit_t pa_l[0x00014]; /* Physical Address[31:12] */
1474 /* -------------- */
1479 struct arbelprm_mod_stat_cfg_st { /* Little Endian */
1480 pseudo_bit_t log_max_srqs[0x00005]; /* Log (base 2) of the number of SRQs to allocate (0 if no SRQs are required), valid only if srq bit is set. */
1481 pseudo_bit_t reserved0[0x00001];
1482 pseudo_bit_t srq[0x00001]; /* When set SRQs are supported */
1483 pseudo_bit_t srq_m[0x00001]; /* Modify SRQ parameters */
1484 pseudo_bit_t reserved1[0x00018];
1485 /* -------------- */
1486 pseudo_bit_t reserved2[0x007e0];
1487 /* -------------- */
1492 struct arbelprm_srq_context_st { /* Little Endian */
1493 pseudo_bit_t srqn[0x00018]; /* SRQ number */
1494 pseudo_bit_t log_srq_size[0x00004]; /* Log2 of the Number of WQEs in the Receive Queue.
1495 Maximum value is 0x10, i.e. 16M WQEs. */
1496 pseudo_bit_t state[0x00004]; /* SRQ State:
1500 Valid only on QUERY_SRQ and HW2SW_SRQ commands. */
1501 /* -------------- */
1502 pseudo_bit_t l_key[0x00020]; /* memory key (L-Key) to be used to access WQEs. */
1503 /* -------------- */
1504 pseudo_bit_t srq_db_record_index[0x00020];/* Index in the UAR Context Table Entry containing the doorbell record for the receive queue.
1505 HW uses this index as an offset from the UAR Context Table Entry in order to read this SRQ doorbell record.
1506 The entry is obtained via the usr_page field. */
1507 /* -------------- */
1508 pseudo_bit_t usr_page[0x00018]; /* Index (offset) of user page allocated for this SRQ (see "non_privileged Access to the HCA Hardware"). Not valid (reserved) in EE context. */
1509 pseudo_bit_t reserved0[0x00005];
1510 pseudo_bit_t log_rq_stride[0x00003];/* Stride (max WQE size) on the receive queue. WQ entry is 16*(2^log_RQ_stride) bytes. */
1511 /* -------------- */
1512 pseudo_bit_t wqe_addr_h[0x00020]; /* Bits 63:32 of WQE address (WQE base address) */
1513 /* -------------- */
1514 pseudo_bit_t reserved1[0x00006];
1515 pseudo_bit_t srq_wqe_base_adr_l[0x0001a];/* While opening (creating) the SRQ, this field should contain the address of first descriptor to be posted. */
1516 /* -------------- */
1517 pseudo_bit_t pd[0x00018]; /* SRQ protection domain. */
1518 pseudo_bit_t reserved2[0x00008];
1519 /* -------------- */
1520 pseudo_bit_t wqe_cnt[0x00010]; /* WQE count on the SRQ.
1521 Valid only on QUERY_SRQ and HW2SW_SRQ commands. */
1522 pseudo_bit_t lwm[0x00010]; /* Limit Water Mark - if the LWM is not zero, and the wqe_cnt drops below LWM when a WQE is dequeued from the SRQ, then a SRQ limit event is fired and the LWM is set to zero. */
1523 /* -------------- */
1524 pseudo_bit_t srq_wqe_counter[0x00010];/* A 16bits counter that is incremented for each WQE posted to the SQ.
1525 Must be 0x0 in SRQ initialization.
1526 (QUERY_SRQ only). */
1527 pseudo_bit_t reserved3[0x00010];
1528 /* -------------- */
1529 pseudo_bit_t reserved4[0x00060];
1530 /* -------------- */
1535 struct arbelprm_pbl_st { /* Little Endian */
1536 pseudo_bit_t mtt_0_h[0x00020]; /* First MTT[63:32] */
1537 /* -------------- */
1538 pseudo_bit_t mtt_0_l[0x00020]; /* First MTT[31:0] */
1539 /* -------------- */
1540 pseudo_bit_t mtt_1_h[0x00020]; /* Second MTT[63:32] */
1541 /* -------------- */
1542 pseudo_bit_t mtt_1_l[0x00020]; /* Second MTT[31:0] */
1543 /* -------------- */
1544 pseudo_bit_t mtt_2_h[0x00020]; /* Third MTT[63:32] */
1545 /* -------------- */
1546 pseudo_bit_t mtt_2_l[0x00020]; /* Third MTT[31:0] */
1547 /* -------------- */
1548 pseudo_bit_t mtt_3_h[0x00020]; /* Fourth MTT[63:32] */
1549 /* -------------- */
1550 pseudo_bit_t mtt_3_l[0x00020]; /* Fourth MTT[31:0] */
1551 /* -------------- */
1554 /* Performance Counters */
1556 struct arbelprm_performance_counters_st { /* Little Endian */
1557 pseudo_bit_t sqpc_access_cnt[0x00020];/* SQPC cache access count */
1558 /* -------------- */
1559 pseudo_bit_t sqpc_miss_cnt[0x00020];/* SQPC cache miss count */
1560 /* -------------- */
1561 pseudo_bit_t reserved0[0x00040];
1562 /* -------------- */
1563 pseudo_bit_t rqpc_access_cnt[0x00020];/* RQPC cache access count */
1564 /* -------------- */
1565 pseudo_bit_t rqpc_miss_cnt[0x00020];/* RQPC cache miss count */
1566 /* -------------- */
1567 pseudo_bit_t reserved1[0x00040];
1568 /* -------------- */
1569 pseudo_bit_t cqc_access_cnt[0x00020];/* CQC cache access count */
1570 /* -------------- */
1571 pseudo_bit_t cqc_miss_cnt[0x00020]; /* CQC cache miss count */
1572 /* -------------- */
1573 pseudo_bit_t reserved2[0x00040];
1574 /* -------------- */
1575 pseudo_bit_t tpt_access_cnt[0x00020];/* TPT cache access count */
1576 /* -------------- */
1577 pseudo_bit_t mpt_miss_cnt[0x00020]; /* MPT cache miss count */
1578 /* -------------- */
1579 pseudo_bit_t mtt_miss_cnt[0x00020]; /* MTT cache miss count */
1580 /* -------------- */
1581 pseudo_bit_t reserved3[0x00620];
1582 /* -------------- */
1585 /* Transport and CI Error Counters */
1587 struct arbelprm_transport_and_ci_error_counters_st { /* Little Endian */
1588 pseudo_bit_t rq_num_lle[0x00020]; /* Responder - number of local length errors */
1589 /* -------------- */
1590 pseudo_bit_t sq_num_lle[0x00020]; /* Requester - number of local length errors */
1591 /* -------------- */
1592 pseudo_bit_t rq_num_lqpoe[0x00020]; /* Responder - number local QP operation error */
1593 /* -------------- */
1594 pseudo_bit_t sq_num_lqpoe[0x00020]; /* Requester - number local QP operation error */
1595 /* -------------- */
1596 pseudo_bit_t rq_num_leeoe[0x00020]; /* Responder - number local EE operation error */
1597 /* -------------- */
1598 pseudo_bit_t sq_num_leeoe[0x00020]; /* Requester - number local EE operation error */
1599 /* -------------- */
1600 pseudo_bit_t rq_num_lpe[0x00020]; /* Responder - number of local protection errors */
1601 /* -------------- */
1602 pseudo_bit_t sq_num_lpe[0x00020]; /* Requester - number of local protection errors */
1603 /* -------------- */
1604 pseudo_bit_t rq_num_wrfe[0x00020]; /* Responder - number of CQEs with error.
1605 Incremented each time a CQE with error is generated */
1606 /* -------------- */
1607 pseudo_bit_t sq_num_wrfe[0x00020]; /* Requester - number of CQEs with error.
1608 Incremented each time a CQE with error is generated */
1609 /* -------------- */
1610 pseudo_bit_t reserved0[0x00020];
1611 /* -------------- */
1612 pseudo_bit_t sq_num_mwbe[0x00020]; /* Requester - number of memory window bind errors */
1613 /* -------------- */
1614 pseudo_bit_t reserved1[0x00020];
1615 /* -------------- */
1616 pseudo_bit_t sq_num_bre[0x00020]; /* Requester - number of bad response errors */
1617 /* -------------- */
1618 pseudo_bit_t rq_num_lae[0x00020]; /* Responder - number of local access errors */
1619 /* -------------- */
1620 pseudo_bit_t reserved2[0x00040];
1621 /* -------------- */
1622 pseudo_bit_t sq_num_rire[0x00020]; /* Requester - number of remote invalid request errors
1623 NAK-Invalid Request on:
1624 1. Unsupported OpCode: Responder detected an unsupported OpCode.
1625 2. Unexpected OpCode: Responder detected an error in the sequence of OpCodes, such
1626 as a missing "Last" packet.
1627 Note: there is no PSN error, thus this does not indicate a dropped packet. */
1628 /* -------------- */
1629 pseudo_bit_t rq_num_rire[0x00020]; /* Responder - number of remote invalid request errors.
1630 NAK may or may not be sent.
1631 1. QP Async Affiliated Error: Unsupported or Reserved OpCode (RC,RD only):
1632 Inbound request OpCode was either reserved, or was for a function not supported by this
1633 QP. (E.g. RDMA or ATOMIC on QP not set up for this).
1634 2. Misaligned ATOMIC: VA does not point to an aligned address on an atomic opera-tion.
1635 3. Too many RDMA READ or ATOMIC Requests: There were more requests received
1636 and not ACKed than allowed for the connection.
1637 4. Out of Sequence OpCode, current packet is "First" or "Only": The Responder
1638 detected an error in the sequence of OpCodes; a missing "Last" packet
1639 5. Out of Sequence OpCode, current packet is not "First" or "Only": The Responder
1640 detected an error in the sequence of OpCodes; a missing "First" packet
1641 6. Local Length Error: Inbound "Send" request message exceeded the responder.s avail-able
1643 7. Length error: RDMA WRITE request message contained too much or too little pay-load
1644 data compared to the DMA length advertised in the first or only packet.
1645 8. Length error: Payload length was not consistent with the opcode:
1646 a: 0 byte <= "only" <= PMTU bytes
1647 b: ("first" or "middle") == PMTU bytes
1648 c: 1byte <= "last" <= PMTU bytes
1649 9. Length error: Inbound message exceeded the size supported by the CA port. */
1650 /* -------------- */
1651 pseudo_bit_t sq_num_rae[0x00020]; /* Requester - number of remote access errors.
1652 NAK-Remote Access Error on:
1653 R_Key Violation: Responder detected an invalid R_Key while executing an RDMA
1655 /* -------------- */
1656 pseudo_bit_t rq_num_rae[0x00020]; /* Responder - number of remote access errors.
1657 R_Key Violation Responder detected an R_Key violation while executing an RDMA
1659 NAK may or may not be sent. */
1660 /* -------------- */
1661 pseudo_bit_t sq_num_roe[0x00020]; /* Requester - number of remote operation errors.
1662 NAK-Remote Operation Error on:
1663 Remote Operation Error: Responder encountered an error, (local to the responder),
1664 which prevented it from completing the request. */
1665 /* -------------- */
1666 pseudo_bit_t rq_num_roe[0x00020]; /* Responder - number of remote operation errors.
1667 NAK-Remote Operation Error on:
1668 1. Malformed WQE: Responder detected a malformed Receive Queue WQE while pro-cessing
1670 2. Remote Operation Error: Responder encountered an error, (local to the responder),
1671 which prevented it from completing the request. */
1672 /* -------------- */
1673 pseudo_bit_t sq_num_tree[0x00020]; /* Requester - number of transport retries exceeded errors */
1674 /* -------------- */
1675 pseudo_bit_t reserved3[0x00020];
1676 /* -------------- */
1677 pseudo_bit_t sq_num_rree[0x00020]; /* Requester - number of RNR nak retries exceeded errors */
1678 /* -------------- */
1679 pseudo_bit_t reserved4[0x00020];
1680 /* -------------- */
1681 pseudo_bit_t sq_num_lrdve[0x00020]; /* Requester - number of local RDD violation errors */
1682 /* -------------- */
1683 pseudo_bit_t rq_num_rirdre[0x00020];/* Responder - number of remote invalid RD request errors */
1684 /* -------------- */
1685 pseudo_bit_t reserved5[0x00040];
1686 /* -------------- */
1687 pseudo_bit_t sq_num_rabrte[0x00020];/* Requester - number of remote aborted errors */
1688 /* -------------- */
1689 pseudo_bit_t reserved6[0x00020];
1690 /* -------------- */
1691 pseudo_bit_t sq_num_ieecne[0x00020];/* Requester - number of invalid EE context number errors */
1692 /* -------------- */
1693 pseudo_bit_t reserved7[0x00020];
1694 /* -------------- */
1695 pseudo_bit_t sq_num_ieecse[0x00020];/* Requester - invalid EE context state errors */
1696 /* -------------- */
1697 pseudo_bit_t reserved8[0x00380];
1698 /* -------------- */
1699 pseudo_bit_t rq_num_oos[0x00020]; /* Responder - number of out of sequence requests received */
1700 /* -------------- */
1701 pseudo_bit_t sq_num_oos[0x00020]; /* Requester - number of out of sequence Naks received */
1702 /* -------------- */
1703 pseudo_bit_t rq_num_mce[0x00020]; /* Responder - number of bad multicast packets received */
1704 /* -------------- */
1705 pseudo_bit_t reserved9[0x00020];
1706 /* -------------- */
1707 pseudo_bit_t rq_num_rsync[0x00020]; /* Responder - number of RESYNC operations */
1708 /* -------------- */
1709 pseudo_bit_t sq_num_rsync[0x00020]; /* Requester - number of RESYNC operations */
1710 /* -------------- */
1711 pseudo_bit_t rq_num_udsdprd[0x00020];/* The number of UD packets silently discarded on the receive queue due to lack of receive descriptor. */
1712 /* -------------- */
1713 pseudo_bit_t reserved10[0x00020];
1714 /* -------------- */
1715 pseudo_bit_t rq_num_ucsdprd[0x00020];/* The number of UC packets silently discarded on the receive queue due to lack of receive descriptor. */
1716 /* -------------- */
1717 pseudo_bit_t reserved11[0x003e0];
1718 /* -------------- */
1719 pseudo_bit_t num_cqovf[0x00020]; /* Number of CQ overflows */
1720 /* -------------- */
1721 pseudo_bit_t num_eqovf[0x00020]; /* Number of EQ overflows */
1722 /* -------------- */
1723 pseudo_bit_t num_baddb[0x00020]; /* Number of bad doorbells */
1724 /* -------------- */
1725 pseudo_bit_t reserved12[0x002a0];
1726 /* -------------- */
1729 /* Event_data Field - HCR Completion Event */
1731 struct arbelprm_hcr_completion_event_st { /* Little Endian */
1732 pseudo_bit_t token[0x00010]; /* HCR Token */
1733 pseudo_bit_t reserved0[0x00010];
1734 /* -------------- */
1735 pseudo_bit_t reserved1[0x00020];
1736 /* -------------- */
1737 pseudo_bit_t status[0x00008]; /* HCR Status */
1738 pseudo_bit_t reserved2[0x00018];
1739 /* -------------- */
1740 pseudo_bit_t out_param_h[0x00020]; /* HCR Output Parameter [63:32] */
1741 /* -------------- */
1742 pseudo_bit_t out_param_l[0x00020]; /* HCR Output Parameter [31:0] */
1743 /* -------------- */
1744 pseudo_bit_t reserved3[0x00020];
1745 /* -------------- */
1748 /* Completion with Error CQE */
1750 struct arbelprm_completion_with_error_st { /* Little Endian */
1751 pseudo_bit_t myqpn[0x00018]; /* Indicates the QP for which completion is being reported */
1752 pseudo_bit_t reserved0[0x00008];
1753 /* -------------- */
1754 pseudo_bit_t reserved1[0x00060];
1755 /* -------------- */
1756 pseudo_bit_t reserved2[0x00010];
1757 pseudo_bit_t vendor_code[0x00008];
1758 pseudo_bit_t syndrome[0x00008]; /* Completion with error syndrome:
1759 0x01 - Local Length Error
1760 0x02 - Local QP Operation Error
1761 0x03 - Local EE Context Operation Error
1762 0x04 - Local Protection Error
1763 0x05 - Work Request Flushed Error
1764 0x06 - Memory Window Bind Error
1765 0x10 - Bad Response Error
1766 0x11 - Local Access Error
1767 0x12 - Remote Invalid Request Error
1768 0x13 - Remote Access Error
1769 0x14 - Remote Operation Error
1770 0x15 - Transport Retry Counter Exceeded
1771 0x16 - RNR Retry Counter Exceeded
1772 0x20 - Local RDD Violation Error
1773 0x21 - Remote Invalid RD Request
1774 0x22 - Remote Aborted Error
1775 0x23 - Invalid EE Context Number
1776 0x24 - Invalid EE Context State
1778 Syndrome is defined according to the IB specification volume 1. For detailed explanation of the syndromes, refer to chapters 10-11 of the IB specification rev 1.1. */
1779 /* -------------- */
1780 pseudo_bit_t reserved3[0x00020];
1781 /* -------------- */
1782 pseudo_bit_t reserved4[0x00006];
1783 pseudo_bit_t wqe_addr[0x0001a]; /* Bits 31:6 of WQE virtual address completion is reported for. The 6 least significant bits are zero. */
1784 /* -------------- */
1785 pseudo_bit_t reserved5[0x00007];
1786 pseudo_bit_t owner[0x00001]; /* Owner field. Zero value of this field means SW ownership of CQE. */
1787 pseudo_bit_t reserved6[0x00010];
1788 pseudo_bit_t opcode[0x00008]; /* The opcode of WQE completion is reported for.
1790 The following values are reported in case of completion with error:
1791 0xFE - For completion with error on Receive Queues
1792 0xFF - For completion with error on Send Queues */
1793 /* -------------- */
1796 /* Resize CQ Input Mailbox */
1798 struct arbelprm_resize_cq_st { /* Little Endian */
1799 pseudo_bit_t reserved0[0x00020];
1800 /* -------------- */
1801 pseudo_bit_t start_addr_h[0x00020]; /* Start address of CQ[63:32].
1802 Must be aligned on CQE size (32 bytes) */
1803 /* -------------- */
1804 pseudo_bit_t start_addr_l[0x00020]; /* Start address of CQ[31:0].
1805 Must be aligned on CQE size (32 bytes) */
1806 /* -------------- */
1807 pseudo_bit_t reserved1[0x00018];
1808 pseudo_bit_t log_cq_size[0x00005]; /* Log (base 2) of the CQ size (in entries) */
1809 pseudo_bit_t reserved2[0x00003];
1810 /* -------------- */
1811 pseudo_bit_t reserved3[0x00060];
1812 /* -------------- */
1813 pseudo_bit_t l_key[0x00020]; /* Memory key (L_Key) to be used to access CQ */
1814 /* -------------- */
1815 pseudo_bit_t reserved4[0x00100];
1816 /* -------------- */
1819 /* MAD_IFC Input Modifier */
1821 struct arbelprm_mad_ifc_input_modifier_st { /* Little Endian */
1822 pseudo_bit_t port_number[0x00008]; /* The packet reception port number (1 or 2). */
1823 pseudo_bit_t mad_extended_info[0x00001];/* Mad_Extended_Info valid bit (MAD_IFC Input Mailbox data from offset 00100h and down). MAD_Extended_Info is read only if this bit is set.
1824 Required for trap generation when BKey check is enabled and for global routed packets. */
1825 pseudo_bit_t reserved0[0x00007];
1826 pseudo_bit_t rlid[0x00010]; /* Remote (source) LID from the received MAD.
1827 This field is required for trap generation upon MKey/BKey validation. */
1828 /* -------------- */
1831 /* MAD_IFC Input Mailbox */
1833 struct arbelprm_mad_ifc_st { /* Little Endian */
1834 pseudo_bit_t request_mad_packet[64][0x00020];/* Request MAD Packet (256bytes) */
1835 /* -------------- */
1836 pseudo_bit_t my_qpn[0x00018]; /* Destination QP number from the received MAD.
1837 This field is reserved if Mad_extended_info indication in the input modifier is clear. */
1838 pseudo_bit_t reserved0[0x00008];
1839 /* -------------- */
1840 pseudo_bit_t rqpn[0x00018]; /* Remote (source) QP number from the received MAD.
1841 This field is reserved if Mad_extended_info indication in the input modifier is clear. */
1842 pseudo_bit_t reserved1[0x00008];
1843 /* -------------- */
1844 pseudo_bit_t rlid[0x00010]; /* Remote (source) LID from the received MAD.
1845 This field is reserved if Mad_extended_info indication in the input modifier is clear. */
1846 pseudo_bit_t ml_path[0x00007]; /* My (destination) LID path bits from the received MAD.
1847 This field is reserved if Mad_extended_info indication in the input modifier is clear. */
1848 pseudo_bit_t g[0x00001]; /* If set, the GRH field in valid.
1849 This field is reserved if Mad_extended_info indication in the input modifier is clear. */
1850 pseudo_bit_t reserved2[0x00004];
1851 pseudo_bit_t sl[0x00004]; /* Service Level of the received MAD.
1852 This field is reserved if Mad_extended_info indication in the input modifier is clear. */
1853 /* -------------- */
1854 pseudo_bit_t pkey_indx[0x00010]; /* Index in PKey table that matches PKey of the received MAD.
1855 This field is reserved if Mad_extended_info indication in the input modifier is clear. */
1856 pseudo_bit_t reserved3[0x00010];
1857 /* -------------- */
1858 pseudo_bit_t reserved4[0x00180];
1859 /* -------------- */
1860 pseudo_bit_t grh[10][0x00020]; /* The GRH field of the MAD packet that was scattered to the first 40 bytes pointed to by the scatter list.
1861 Valid if Mad_extended_info bit (in the input modifier) and g bit are set.
1862 Otherwise this field is reserved. */
1863 /* -------------- */
1864 pseudo_bit_t reserved5[0x004c0];
1865 /* -------------- */
1868 /* Query Debug Message */
1870 struct arbelprm_query_debug_msg_st { /* Little Endian */
1871 pseudo_bit_t phy_addr_h[0x00020]; /* Translation of the address in firmware area. High 32 bits. */
1872 /* -------------- */
1873 pseudo_bit_t v[0x00001]; /* Physical translation is valid */
1874 pseudo_bit_t reserved0[0x0000b];
1875 pseudo_bit_t phy_addr_l[0x00014]; /* Translation of the address in firmware area. Low 32 bits. */
1876 /* -------------- */
1877 pseudo_bit_t fw_area_base[0x00020]; /* Firmware area base address. The format strings and the trace buffers may be located starting from this address. */
1878 /* -------------- */
1879 pseudo_bit_t fw_area_size[0x00020]; /* Firmware area size */
1880 /* -------------- */
1881 pseudo_bit_t trc_hdr_sz[0x00020]; /* Trace message header size in dwords. */
1882 /* -------------- */
1883 pseudo_bit_t trc_arg_num[0x00020]; /* The number of arguments per trace message. */
1884 /* -------------- */
1885 pseudo_bit_t reserved1[0x000c0];
1886 /* -------------- */
1887 pseudo_bit_t dbg_msk_h[0x00020]; /* Debug messages mask [63:32] */
1888 /* -------------- */
1889 pseudo_bit_t dbg_msk_l[0x00020]; /* Debug messages mask [31:0] */
1890 /* -------------- */
1891 pseudo_bit_t reserved2[0x00040];
1892 /* -------------- */
1893 pseudo_bit_t buff0_addr[0x00020]; /* Address in firmware area of Trace Buffer 0 */
1894 /* -------------- */
1895 pseudo_bit_t buff0_size[0x00020]; /* Size of Trace Buffer 0 */
1896 /* -------------- */
1897 pseudo_bit_t buff1_addr[0x00020]; /* Address in firmware area of Trace Buffer 1 */
1898 /* -------------- */
1899 pseudo_bit_t buff1_size[0x00020]; /* Size of Trace Buffer 1 */
1900 /* -------------- */
1901 pseudo_bit_t buff2_addr[0x00020]; /* Address in firmware area of Trace Buffer 2 */
1902 /* -------------- */
1903 pseudo_bit_t buff2_size[0x00020]; /* Size of Trace Buffer 2 */
1904 /* -------------- */
1905 pseudo_bit_t buff3_addr[0x00020]; /* Address in firmware area of Trace Buffer 3 */
1906 /* -------------- */
1907 pseudo_bit_t buff3_size[0x00020]; /* Size of Trace Buffer 3 */
1908 /* -------------- */
1909 pseudo_bit_t buff4_addr[0x00020]; /* Address in firmware area of Trace Buffer 4 */
1910 /* -------------- */
1911 pseudo_bit_t buff4_size[0x00020]; /* Size of Trace Buffer 4 */
1912 /* -------------- */
1913 pseudo_bit_t buff5_addr[0x00020]; /* Address in firmware area of Trace Buffer 5 */
1914 /* -------------- */
1915 pseudo_bit_t buff5_size[0x00020]; /* Size of Trace Buffer 5 */
1916 /* -------------- */
1917 pseudo_bit_t buff6_addr[0x00020]; /* Address in firmware area of Trace Buffer 6 */
1918 /* -------------- */
1919 pseudo_bit_t buff6_size[0x00020]; /* Size of Trace Buffer 6 */
1920 /* -------------- */
1921 pseudo_bit_t buff7_addr[0x00020]; /* Address in firmware area of Trace Buffer 7 */
1922 /* -------------- */
1923 pseudo_bit_t buff7_size[0x00020]; /* Size of Trace Buffer 7 */
1924 /* -------------- */
1925 pseudo_bit_t reserved3[0x00400];
1926 /* -------------- */
1929 /* User Access Region */
1931 struct arbelprm_uar_st { /* Little Endian */
1932 struct arbelprm_rd_send_doorbell_st rd_send_doorbell;/* Reliable Datagram send doorbell */
1933 /* -------------- */
1934 struct arbelprm_send_doorbell_st send_doorbell;/* Send doorbell */
1935 /* -------------- */
1936 pseudo_bit_t reserved0[0x00040];
1937 /* -------------- */
1938 struct arbelprm_cq_cmd_doorbell_st cq_command_doorbell;/* CQ Doorbell */
1939 /* -------------- */
1940 pseudo_bit_t reserved1[0x03ec0];
1941 /* -------------- */
1944 /* Receive doorbell */
1946 struct arbelprm_receive_doorbell_st { /* Little Endian */
1947 pseudo_bit_t reserved0[0x00008];
1948 pseudo_bit_t wqe_counter[0x00010]; /* Modulo-64K counter of WQEs posted on this queue since its creation. Should be zero for the first doorbell on the QP */
1949 pseudo_bit_t reserved1[0x00008];
1950 /* -------------- */
1951 pseudo_bit_t reserved2[0x00005];
1952 pseudo_bit_t srq[0x00001]; /* If set, this is a Shared Receive Queue */
1953 pseudo_bit_t reserved3[0x00002];
1954 pseudo_bit_t qpn[0x00018]; /* QP number or SRQ number this doorbell is rung on */
1955 /* -------------- */
1958 /* SET_IB Parameters */
1960 struct arbelprm_set_ib_st { /* Little Endian */
1961 pseudo_bit_t rqk[0x00001]; /* Reset QKey Violation Counter */
1962 pseudo_bit_t reserved0[0x00011];
1963 pseudo_bit_t sig[0x00001]; /* Set System Image GUID to system_image_guid specified.
1964 system_image_guid and sig must be the same for all ports. */
1965 pseudo_bit_t reserved1[0x0000d];
1966 /* -------------- */
1967 pseudo_bit_t capability_mask[0x00020];/* PortInfo Capability Mask */
1968 /* -------------- */
1969 pseudo_bit_t system_image_guid_h[0x00020];/* System Image GUID[63:32], takes effect only if the SIG bit is set
1970 Must be the same for both ports. */
1971 /* -------------- */
1972 pseudo_bit_t system_image_guid_l[0x00020];/* System Image GUID[31:0], takes effect only if the SIG bit is set
1973 Must be the same for both ports. */
1974 /* -------------- */
1975 pseudo_bit_t reserved2[0x00180];
1976 /* -------------- */
1979 /* Multicast Group Member */
1981 struct arbelprm_mgm_entry_st { /* Little Endian */
1982 pseudo_bit_t reserved0[0x00006];
1983 pseudo_bit_t next_gid_index[0x0001a];/* Index of next Multicast Group Member whose GID maps to same MGID_HASH number.
1984 The index is into the Multicast Group Table, which is the comprised the MGHT and AMGM tables.
1985 next_gid_index=0 means end of the chain. */
1986 /* -------------- */
1987 pseudo_bit_t reserved1[0x00060];
1988 /* -------------- */
1989 pseudo_bit_t mgid_128_96[0x00020]; /* Multicast group GID[128:96] in big endian format.
1990 Use the Reserved GID 0:0:0:0:0:0:0:0 for an invalid entry. */
1991 /* -------------- */
1992 pseudo_bit_t mgid_95_64[0x00020]; /* Multicast group GID[95:64] in big endian format.
1993 Use the Reserved GID 0:0:0:0:0:0:0:0 for an invalid entry. */
1994 /* -------------- */
1995 pseudo_bit_t mgid_63_32[0x00020]; /* Multicast group GID[63:32] in big endian format.
1996 Use the Reserved GID 0:0:0:0:0:0:0:0 for an invalid entry. */
1997 /* -------------- */
1998 pseudo_bit_t mgid_31_0[0x00020]; /* Multicast group GID[31:0] in big endian format.
1999 Use the Reserved GID 0:0:0:0:0:0:0:0 for an invalid entry. */
2000 /* -------------- */
2001 struct arbelprm_mgmqp_st mgmqp_0; /* Multicast Group Member QP */
2002 /* -------------- */
2003 struct arbelprm_mgmqp_st mgmqp_1; /* Multicast Group Member QP */
2004 /* -------------- */
2005 struct arbelprm_mgmqp_st mgmqp_2; /* Multicast Group Member QP */
2006 /* -------------- */
2007 struct arbelprm_mgmqp_st mgmqp_3; /* Multicast Group Member QP */
2008 /* -------------- */
2009 struct arbelprm_mgmqp_st mgmqp_4; /* Multicast Group Member QP */
2010 /* -------------- */
2011 struct arbelprm_mgmqp_st mgmqp_5; /* Multicast Group Member QP */
2012 /* -------------- */
2013 struct arbelprm_mgmqp_st mgmqp_6; /* Multicast Group Member QP */
2014 /* -------------- */
2015 struct arbelprm_mgmqp_st mgmqp_7; /* Multicast Group Member QP */
2016 /* -------------- */
2019 /* INIT_IB Parameters */
2021 struct arbelprm_init_ib_st { /* Little Endian */
2022 pseudo_bit_t reserved0[0x00004];
2023 pseudo_bit_t vl_cap[0x00004]; /* Maximum VLs supported on the port, excluding VL15.
2024 Legal values are 1,2,4 and 8. */
2025 pseudo_bit_t port_width_cap[0x00004];/* IB Port Width
2028 11 - 1x, 4x or 12x (must not be used in InfiniHost-III-EX MT25208)
2030 pseudo_bit_t mtu_cap[0x00004]; /* Maximum MTU Supported
2036 0x5 - 0xF Reserved */
2037 pseudo_bit_t g0[0x00001]; /* Set port GUID0 to GUID0 specified */
2038 pseudo_bit_t ng[0x00001]; /* Set node GUID to node_guid specified.
2039 node_guid and ng must be the same for all ports. */
2040 pseudo_bit_t sig[0x00001]; /* Set System Image GUID to system_image_guid specified.
2041 system_image_guid and sig must be the same for all ports. */
2042 pseudo_bit_t reserved1[0x0000d];
2043 /* -------------- */
2044 pseudo_bit_t max_gid[0x00010]; /* Maximum number of GIDs for the port */
2045 pseudo_bit_t reserved2[0x00010];
2046 /* -------------- */
2047 pseudo_bit_t max_pkey[0x00010]; /* Maximum pkeys for the port.
2048 Must be the same for both ports. */
2049 pseudo_bit_t reserved3[0x00010];
2050 /* -------------- */
2051 pseudo_bit_t reserved4[0x00020];
2052 /* -------------- */
2053 pseudo_bit_t guid0_h[0x00020]; /* EUI-64 GUID assigned by the manufacturer, takes effect only if the G0 bit is set (bits 63:32) */
2054 /* -------------- */
2055 pseudo_bit_t guid0_l[0x00020]; /* EUI-64 GUID assigned by the manufacturer, takes effect only if the G0 bit is set (bits 31:0) */
2056 /* -------------- */
2057 pseudo_bit_t node_guid_h[0x00020]; /* Node GUID[63:32], takes effect only if the NG bit is set
2058 Must be the same for both ports. */
2059 /* -------------- */
2060 pseudo_bit_t node_guid_l[0x00020]; /* Node GUID[31:0], takes effect only if the NG bit is set
2061 Must be the same for both ports. */
2062 /* -------------- */
2063 pseudo_bit_t system_image_guid_h[0x00020];/* System Image GUID[63:32], takes effect only if the SIG bit is set
2064 Must be the same for both ports. */
2065 /* -------------- */
2066 pseudo_bit_t system_image_guid_l[0x00020];/* System Image GUID[31:0], takes effect only if the SIG bit is set
2067 Must be the same for both ports. */
2068 /* -------------- */
2069 pseudo_bit_t reserved5[0x006c0];
2070 /* -------------- */
2073 /* Query Device Limitations */
2075 struct arbelprm_query_dev_lim_st { /* Little Endian */
2076 pseudo_bit_t reserved0[0x00080];
2077 /* -------------- */
2078 pseudo_bit_t log_max_qp[0x00005]; /* Log2 of the Maximum number of QPs supported */
2079 pseudo_bit_t reserved1[0x00003];
2080 pseudo_bit_t log2_rsvd_qps[0x00004];/* Log (base 2) of the number of QPs reserved for firmware use
2081 The reserved resources are numbered from 0 to 2^log2_rsvd_qps-1 */
2082 pseudo_bit_t reserved2[0x00004];
2083 pseudo_bit_t log_max_qp_sz[0x00008];/* The maximum number of WQEs allowed on the RQ or the SQ is 2^log_max_qp_sz-1 */
2084 pseudo_bit_t log_max_srq_sz[0x00008];/* The maximum number of WQEs allowed on the SRQ is 2^log_max_srq_sz-1 */
2085 /* -------------- */
2086 pseudo_bit_t log_max_ee[0x00005]; /* Log2 of the Maximum number of EE contexts supported */
2087 pseudo_bit_t reserved3[0x00003];
2088 pseudo_bit_t log2_rsvd_ees[0x00004];/* Log (base 2) of the number of EECs reserved for firmware use
2089 The reserved resources are numbered from 0 to 2^log2_rsvd_ees-1 */
2090 pseudo_bit_t reserved4[0x00004];
2091 pseudo_bit_t log_max_srqs[0x00005]; /* Log base 2 of the maximum number of SRQs supported, valid only if SRQ bit is set.
2093 pseudo_bit_t reserved5[0x00007];
2094 pseudo_bit_t log2_rsvd_srqs[0x00004];/* Log (base 2) of the number of reserved SRQs for firmware use
2095 The reserved resources are numbered from 0 to 2^log2_rsvd_srqs-1
2096 This parameter is valid only if the SRQ bit is set. */
2097 /* -------------- */
2098 pseudo_bit_t log_max_cq[0x00005]; /* Log2 of the Maximum number of CQs supported */
2099 pseudo_bit_t reserved6[0x00003];
2100 pseudo_bit_t log2_rsvd_cqs[0x00004];/* Log (base 2) of the number of CQs reserved for firmware use
2101 The reserved resources are numbered from 0 to 2^log2_rsrvd_cqs-1 */
2102 pseudo_bit_t reserved7[0x00004];
2103 pseudo_bit_t log_max_cq_sz[0x00008];/* Log2 of the Maximum CQEs allowed in a CQ */
2104 pseudo_bit_t reserved8[0x00008];
2105 /* -------------- */
2106 pseudo_bit_t log_max_eq[0x00003]; /* Log2 of the Maximum number of EQs */
2107 pseudo_bit_t reserved9[0x00005];
2108 pseudo_bit_t num_rsvd_eqs[0x00004]; /* The number of EQs reserved for firmware use
2109 The reserved resources are numbered from 0 to num_rsvd_eqs-1
2110 If 0 - no resources are reserved. */
2111 pseudo_bit_t reserved10[0x00004];
2112 pseudo_bit_t log_max_mpts[0x00006]; /* Log (base 2) of the maximum number of MPT entries (the number of Regions/Windows) */
2113 pseudo_bit_t reserved11[0x00002];
2114 pseudo_bit_t log_max_eq_sz[0x00008];/* Log2 of the Maximum EQEs allowed in a EQ */
2115 /* -------------- */
2116 pseudo_bit_t log_max_mtts[0x00006]; /* Log2 of the Maximum number of MTT entries */
2117 pseudo_bit_t reserved12[0x00002];
2118 pseudo_bit_t log2_rsvd_mrws[0x00004];/* Log (base 2) of the number of MPTs reserved for firmware use
2119 The reserved resources are numbered from 0 to 2^log2_rsvd_mrws-1 */
2120 pseudo_bit_t reserved13[0x00004];
2121 pseudo_bit_t log_max_mrw_sz[0x00008];/* Log2 of the Maximum Size of Memory Region/Window */
2122 pseudo_bit_t reserved14[0x00004];
2123 pseudo_bit_t log2_rsvd_mtts[0x00004];/* Log (base 2) of the number of MTT entries reserved for firmware use
2124 The reserved resources are numbered from 0 to 2^log2_rsvd_mtts-1
2126 /* -------------- */
2127 pseudo_bit_t reserved15[0x00020];
2128 /* -------------- */
2129 pseudo_bit_t log_max_ra_res_qp[0x00006];/* Log2 of the Maximum number of outstanding RDMA read/Atomic per QP as a responder */
2130 pseudo_bit_t reserved16[0x0000a];
2131 pseudo_bit_t log_max_ra_req_qp[0x00006];/* Log2 of the maximum number of outstanding RDMA read/Atomic per QP as a requester */
2132 pseudo_bit_t reserved17[0x0000a];
2133 /* -------------- */
2134 pseudo_bit_t log_max_ra_res_global[0x00006];/* Log2 of the maximum number of RDMA read/atomic operations the HCA responder can support globally. That implies the RDB table size. */
2135 pseudo_bit_t reserved18[0x00016];
2136 pseudo_bit_t log2_rsvd_rdbs[0x00004];/* Log (base 2) of the number of RDB entries reserved for firmware use
2137 The reserved resources are numbered from 0 to 2^log2_rsvd_rdbs-1 */
2138 /* -------------- */
2139 pseudo_bit_t rsz_srq[0x00001]; /* Ability to modify the maximum number of WRs per SRQ. */
2140 pseudo_bit_t reserved19[0x0001f];
2141 /* -------------- */
2142 pseudo_bit_t num_ports[0x00004]; /* Number of IB ports. */
2143 pseudo_bit_t max_vl[0x00004]; /* Maximum VLs supported on each port, excluding VL15 */
2144 pseudo_bit_t max_port_width[0x00004];/* IB Port Width
2149 pseudo_bit_t max_mtu[0x00004]; /* Maximum MTU Supported
2155 0x5 - 0xF Reserved */
2156 pseudo_bit_t local_ca_ack_delay[0x00005];/* The Local CA ACK Delay. This is the value recommended to be returned in Query HCA verb.
2157 The delay value in microseconds is computed using 4.096us * 2^(local_ca_ack_delay). */
2158 pseudo_bit_t reserved20[0x0000b];
2159 /* -------------- */
2160 pseudo_bit_t log_max_gid[0x00004]; /* Log2 of the maximum number of GIDs per port */
2161 pseudo_bit_t reserved21[0x0001c];
2162 /* -------------- */
2163 pseudo_bit_t log_max_pkey[0x00004]; /* Log2 of the max PKey Table Size (per IB port) */
2164 pseudo_bit_t reserved22[0x0000c];
2165 pseudo_bit_t stat_rate_support[0x00010];/* bit mask of stat rate supported
2170 /* -------------- */
2171 pseudo_bit_t reserved23[0x00020];
2172 /* -------------- */
2173 pseudo_bit_t rc[0x00001]; /* RC Transport supported */
2174 pseudo_bit_t uc[0x00001]; /* UC Transport Supported */
2175 pseudo_bit_t ud[0x00001]; /* UD Transport Supported */
2176 pseudo_bit_t rd[0x00001]; /* RD Transport Supported */
2177 pseudo_bit_t raw_ipv6[0x00001]; /* Raw IPv6 Transport Supported */
2178 pseudo_bit_t raw_ether[0x00001]; /* Raw Ethertype Transport Supported */
2179 pseudo_bit_t srq[0x00001]; /* SRQ is supported
2181 pseudo_bit_t ipo_ib_checksum[0x00001];/* IP over IB checksum is supported */
2182 pseudo_bit_t pkv[0x00001]; /* PKey Violation Counter Supported */
2183 pseudo_bit_t qkv[0x00001]; /* QKey Violation Coutner Supported */
2184 pseudo_bit_t reserved24[0x00006];
2185 pseudo_bit_t mw[0x00001]; /* Memory windows supported */
2186 pseudo_bit_t apm[0x00001]; /* Automatic Path Migration Supported */
2187 pseudo_bit_t atm[0x00001]; /* Atomic operations supported (atomicity is guaranteed between QPs on this HCA) */
2188 pseudo_bit_t rm[0x00001]; /* Raw Multicast Supported */
2189 pseudo_bit_t avp[0x00001]; /* Address Vector Port checking supported */
2190 pseudo_bit_t udm[0x00001]; /* UD Multicast Supported */
2191 pseudo_bit_t reserved25[0x00002];
2192 pseudo_bit_t pg[0x00001]; /* Paging on demand supported */
2193 pseudo_bit_t r[0x00001]; /* Router mode supported */
2194 pseudo_bit_t reserved26[0x00006];
2195 /* -------------- */
2196 pseudo_bit_t log_pg_sz[0x00008]; /* Minimum system page size supported (log2).
2197 For proper operation it must be less than or equal the hosting platform (CPU) minimum page size. */
2198 pseudo_bit_t reserved27[0x00008];
2199 pseudo_bit_t uar_sz[0x00006]; /* UAR Area Size = 1MB * 2^uar_sz */
2200 pseudo_bit_t reserved28[0x00006];
2201 pseudo_bit_t num_rsvd_uars[0x00004];/* The number of UARs reserved for firmware use
2202 The reserved resources are numbered from 0 to num_reserved_uars-1
2203 Note that UAR number num_reserved_uars is always for the kernel. */
2204 /* -------------- */
2205 pseudo_bit_t reserved29[0x00020];
2206 /* -------------- */
2207 pseudo_bit_t max_desc_sz_sq[0x00010];/* Max descriptor size in bytes for the send queue */
2208 pseudo_bit_t max_sg_sq[0x00008]; /* The maximum S/G list elements in a SQ WQE (max_desc_sz/16 - 3) */
2209 pseudo_bit_t reserved30[0x00008];
2210 /* -------------- */
2211 pseudo_bit_t max_desc_sz_rq[0x00010];/* Max descriptor size in bytes for the receive queue */
2212 pseudo_bit_t max_sg_rq[0x00008]; /* The maximum S/G list elements in a RQ WQE (max_desc_sz/16 - 3) */
2213 pseudo_bit_t reserved31[0x00008];
2214 /* -------------- */
2215 pseudo_bit_t reserved32[0x00040];
2216 /* -------------- */
2217 pseudo_bit_t log_max_mcg[0x00008]; /* Log2 of the maximum number of multicast groups */
2218 pseudo_bit_t num_rsvd_mcgs[0x00004];/* The number of MGMs reserved for firmware use in the MGHT.
2219 The reserved resources are numbered from 0 to num_reserved_mcgs-1
2220 If 0 - no resources are reserved. */
2221 pseudo_bit_t reserved33[0x00004];
2222 pseudo_bit_t log_max_qp_mcg[0x00008];/* Log2 of the maximum number of QPs per multicast group */
2223 pseudo_bit_t reserved34[0x00008];
2224 /* -------------- */
2225 pseudo_bit_t log_max_rdds[0x00006]; /* Log2 of the maximum number of RDDs */
2226 pseudo_bit_t reserved35[0x00006];
2227 pseudo_bit_t num_rsvd_rdds[0x00004];/* The number of RDDs reserved for firmware use
2228 The reserved resources are numbered from 0 to num_reserved_rdds-1.
2229 If 0 - no resources are reserved. */
2230 pseudo_bit_t log_max_pd[0x00006]; /* Log2 of the maximum number of PDs */
2231 pseudo_bit_t reserved36[0x00006];
2232 pseudo_bit_t num_rsvd_pds[0x00004]; /* The number of PDs reserved for firmware use
2233 The reserved resources are numbered from 0 to num_reserved_pds-1
2234 If 0 - no resources are reserved. */
2235 /* -------------- */
2236 pseudo_bit_t reserved37[0x000c0];
2237 /* -------------- */
2238 pseudo_bit_t qpc_entry_sz[0x00010]; /* QPC Entry Size for the device
2239 For the InfiniHost-III-EX MT25208 entry size is 256 bytes */
2240 pseudo_bit_t eec_entry_sz[0x00010]; /* EEC Entry Size for the device
2241 For the InfiniHost-III-EX MT25208 entry size is 256 bytes */
2242 /* -------------- */
2243 pseudo_bit_t eqpc_entry_sz[0x00010];/* Extended QPC entry size for the device
2244 For the InfiniHost-III-EX MT25208 entry size is 32 bytes */
2245 pseudo_bit_t eeec_entry_sz[0x00010];/* Extended EEC entry size for the device
2246 For the InfiniHost-III-EX MT25208 entry size is 32 bytes */
2247 /* -------------- */
2248 pseudo_bit_t cqc_entry_sz[0x00010]; /* CQC entry size for the device
2249 For the InfiniHost-III-EX MT25208 entry size is 64 bytes */
2250 pseudo_bit_t eqc_entry_sz[0x00010]; /* EQ context entry size for the device
2251 For the InfiniHost-III-EX MT25208 entry size is 64 bytes */
2252 /* -------------- */
2253 pseudo_bit_t uar_scratch_entry_sz[0x00010];/* UAR Scratchpad Entry Size
2254 For the InfiniHost-III-EX MT25208 entry size is 32 bytes */
2255 pseudo_bit_t srq_entry_sz[0x00010]; /* SRQ context entry size for the device
2256 For the InfiniHost-III-EX MT25208 entry size is 32 bytes */
2257 /* -------------- */
2258 pseudo_bit_t mpt_entry_sz[0x00010]; /* MPT entry size in Bytes for the device.
2259 For the InfiniHost-III-EX MT25208 entry size is 64 bytes */
2260 pseudo_bit_t mtt_entry_sz[0x00010]; /* MTT entry size in Bytes for the device.
2261 For the InfiniHost-III-EX MT25208 entry size is 8 bytes */
2262 /* -------------- */
2263 pseudo_bit_t bmme[0x00001]; /* Base Memory Management Extension Support */
2264 pseudo_bit_t win_type[0x00001]; /* Bound Type 2 Memory Window Association mechanism:
2265 0 - Type 2A - QP Number Association; or
2266 1 - Type 2B - QP Number and PD Association. */
2267 pseudo_bit_t mps[0x00001]; /* Ability of this HCA to support multiple page sizes per Memory Region. */
2268 pseudo_bit_t bl[0x00001]; /* Ability of this HCA to support Block List Physical Buffer Lists. (The device does not supports Block List) */
2269 pseudo_bit_t zb[0x00001]; /* Zero Based region/windows supported */
2270 pseudo_bit_t lif[0x00001]; /* Ability of this HCA to support Local Invalidate Fencing. */
2271 pseudo_bit_t reserved38[0x00002];
2272 pseudo_bit_t log_pbl_sz[0x00006]; /* Log2 of the Maximum Physical Buffer List size in Bytes supported by this HCA when invoking the Allocate L_Key verb.
2274 pseudo_bit_t reserved39[0x00012];
2275 /* -------------- */
2276 pseudo_bit_t resd_lkey[0x00020]; /* The value of the reserved Lkey for Base Memory Management Extension */
2277 /* -------------- */
2278 pseudo_bit_t lamr[0x00001]; /* When set the device requires local attached memory in order to operate.
2279 When set, ICM pages, Firmware Area and ICM auxiliary pages must be allocated in the local attached memory. */
2280 pseudo_bit_t reserved40[0x0001f];
2281 /* -------------- */
2282 pseudo_bit_t max_icm_size_h[0x00020];/* Bits [63:32] of maximum ICM size InfiniHost III Ex support in bytes. */
2283 /* -------------- */
2284 pseudo_bit_t max_icm_size_l[0x00020];/* Bits [31:0] of maximum ICM size InfiniHost III Ex support in bytes. */
2285 /* -------------- */
2286 pseudo_bit_t reserved41[0x002c0];
2287 /* -------------- */
2290 /* QUERY_ADAPTER Parameters Block */
2292 struct arbelprm_query_adapter_st { /* Little Endian */
2293 pseudo_bit_t reserved0[0x00080];
2294 /* -------------- */
2295 pseudo_bit_t reserved1[0x00018];
2296 pseudo_bit_t intapin[0x00008]; /* Driver should set this field to INTR value in the event queue in order to get Express interrupt messages. */
2297 /* -------------- */
2298 pseudo_bit_t reserved2[0x00060];
2299 /* -------------- */
2300 struct arbelprm_vsd_st vsd;
2301 /* -------------- */
2304 /* QUERY_FW Parameters Block */
2306 struct arbelprm_query_fw_st { /* Little Endian */
2307 pseudo_bit_t fw_rev_major[0x00010]; /* Firmware Revision - Major */
2308 pseudo_bit_t fw_pages[0x00010]; /* Amount of physical memory to be allocated for FW usage is in 4KByte pages. */
2309 /* -------------- */
2310 pseudo_bit_t fw_rev_minor[0x00010]; /* Firmware Revision - Minor */
2311 pseudo_bit_t fw_rev_subminor[0x00010];/* Firmware Sub-minor version (Patch level). */
2312 /* -------------- */
2313 pseudo_bit_t cmd_interface_rev[0x00010];/* Command Interface Interpreter Revision ID */
2314 pseudo_bit_t reserved0[0x0000e];
2315 pseudo_bit_t wqe_h_mode[0x00001]; /* Hermon mode. If '1', then WQE and AV format is the advanced format */
2316 pseudo_bit_t zb_wq_cq[0x00001]; /* If '1', then ZB mode of WQ and CQ are enabled (i.e. real Memfree PRM is supported) */
2317 /* -------------- */
2318 pseudo_bit_t log_max_outstanding_cmd[0x00008];/* Log2 of the maximum number of commands the HCR can support simultaneously */
2319 pseudo_bit_t reserved1[0x00017];
2320 pseudo_bit_t dt[0x00001]; /* Debug Trace Support
2321 0 - Debug trace is not supported
2322 1 - Debug trace is supported */
2323 /* -------------- */
2324 pseudo_bit_t cmd_interface_db[0x00001];/* Set if the device accepts commands by means of special doorbells */
2325 pseudo_bit_t reserved2[0x0001f];
2326 /* -------------- */
2327 pseudo_bit_t reserved3[0x00060];
2328 /* -------------- */
2329 pseudo_bit_t clr_int_base_addr_h[0x00020];/* Bits [63:32] of Clear interrupt register physical address.
2330 Points to 64 bit register. */
2331 /* -------------- */
2332 pseudo_bit_t clr_int_base_addr_l[0x00020];/* Bits [31:0] of Clear interrupt register physical address.
2333 Points to 64 bit register. */
2334 /* -------------- */
2335 pseudo_bit_t reserved4[0x00040];
2336 /* -------------- */
2337 pseudo_bit_t error_buf_start_h[0x00020];/* Read Only buffer for catastrophic error reports (physical address) */
2338 /* -------------- */
2339 pseudo_bit_t error_buf_start_l[0x00020];/* Read Only buffer for catastrophic error reports (physical address) */
2340 /* -------------- */
2341 pseudo_bit_t error_buf_size[0x00020];/* Size in words */
2342 /* -------------- */
2343 pseudo_bit_t reserved5[0x00020];
2344 /* -------------- */
2345 pseudo_bit_t eq_arm_base_addr_h[0x00020];/* Bits [63:32] of EQ Arm DBs physical address.
2346 Points to 64 bit register.
2347 Setting bit x in the offset, arms EQ number x.
2349 /* -------------- */
2350 pseudo_bit_t eq_arm_base_addr_l[0x00020];/* Bits [31:0] of EQ Arm DBs physical address.
2351 Points to 64 bit register.
2352 Setting bit x in the offset, arms EQ number x. */
2353 /* -------------- */
2354 pseudo_bit_t eq_set_ci_base_addr_h[0x00020];/* Bits [63:32] of EQ Set CI DBs Table physical address.
2355 Points to a the EQ Set CI DBs Table base address. */
2356 /* -------------- */
2357 pseudo_bit_t eq_set_ci_base_addr_l[0x00020];/* Bits [31:0] of EQ Set CI DBs Table physical address.
2358 Points to a the EQ Set CI DBs Table base address. */
2359 /* -------------- */
2360 pseudo_bit_t cmd_db_dw1[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 1 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2361 pseudo_bit_t cmd_db_dw0[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 0 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2362 /* -------------- */
2363 pseudo_bit_t cmd_db_dw3[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 3 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2364 pseudo_bit_t cmd_db_dw2[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 2 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2365 /* -------------- */
2366 pseudo_bit_t cmd_db_dw5[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 5 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2367 pseudo_bit_t cmd_db_dw4[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 4 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2368 /* -------------- */
2369 pseudo_bit_t cmd_db_dw7[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 7 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2370 pseudo_bit_t cmd_db_dw6[0x00010]; /* offset in bytes from cmd_db_addr_base where DWord 6 of a Command Interface Doorbell should be written. Valid only if CmdInterfaceDb bit is '1' */
2371 /* -------------- */
2372 pseudo_bit_t cmd_db_addr_base_h[0x00020];/* High bits of cmd_db_addr_base, which cmd_db_dw offsets refer to. Valid only if CmdInterfaceDb bit is '1' */
2373 /* -------------- */
2374 pseudo_bit_t cmd_db_addr_base_l[0x00020];/* Low bits of cmd_db_addr_base, which cmd_db_dw offsets refer to. Valid only if CmdInterfaceDb bit is '1' */
2375 /* -------------- */
2376 pseudo_bit_t reserved6[0x004c0];
2377 /* -------------- */
2382 struct arbelprm_access_lam_st { /* Little Endian */
2383 struct arbelprm_access_lam_inject_errors_st access_lam_inject_errors;
2384 /* -------------- */
2385 pseudo_bit_t reserved0[0x00080];
2386 /* -------------- */
2389 /* ENABLE_LAM Parameters Block */
2391 struct arbelprm_enable_lam_st { /* Little Endian */
2392 pseudo_bit_t lam_start_adr_h[0x00020];/* LAM start address [63:32] */
2393 /* -------------- */
2394 pseudo_bit_t lam_start_adr_l[0x00020];/* LAM start address [31:0] */
2395 /* -------------- */
2396 pseudo_bit_t lam_end_adr_h[0x00020];/* LAM end address [63:32] */
2397 /* -------------- */
2398 pseudo_bit_t lam_end_adr_l[0x00020];/* LAM end address [31:0] */
2399 /* -------------- */
2400 pseudo_bit_t di[0x00002]; /* Data Integrity Configuration:
2403 10 - ECC Detection Only
2404 11 - ECC With Correction */
2405 pseudo_bit_t ap[0x00002]; /* Auto Precharge Mode
2406 00 - No auto precharge
2407 01 - Auto precharge per transaction
2408 10 - Auto precharge per 64 bytes
2410 pseudo_bit_t dh[0x00001]; /* When set, LAM is Hidden and can not be accessed directly from the PCI bus. */
2411 pseudo_bit_t reserved0[0x0001b];
2412 /* -------------- */
2413 pseudo_bit_t reserved1[0x00160];
2414 /* -------------- */
2415 struct arbelprm_dimminfo_st dimm0; /* Logical DIMM 0 Parameters */
2416 /* -------------- */
2417 struct arbelprm_dimminfo_st dimm1; /* Logical DIMM 1 Parameters */
2418 /* -------------- */
2419 pseudo_bit_t reserved2[0x00400];
2420 /* -------------- */
2423 /* Memory Access Parameters for UD Address Vector Table */
2425 struct arbelprm_udavtable_memory_parameters_st { /* Little Endian */
2426 pseudo_bit_t l_key[0x00020]; /* L_Key used to access TPT */
2427 /* -------------- */
2428 pseudo_bit_t pd[0x00018]; /* PD used by TPT for matching against PD of region entry being accessed. */
2429 pseudo_bit_t reserved0[0x00005];
2430 pseudo_bit_t xlation_en[0x00001]; /* When cleared, address is physical address and no translation will be done. When set, address is virtual. */
2431 pseudo_bit_t reserved1[0x00002];
2432 /* -------------- */
2435 /* INIT_HCA & QUERY_HCA Parameters Block */
2437 struct arbelprm_init_hca_st { /* Little Endian */
2438 pseudo_bit_t reserved0[0x00060];
2439 /* -------------- */
2440 pseudo_bit_t reserved1[0x00010];
2441 pseudo_bit_t time_stamp_granularity[0x00008];/* This field controls the granularity in which CQE Timestamp counter is incremented.
2442 The TimeStampGranularity units is 1/4 of a microseconds. (e.g is TimeStampGranularity is configured to 0x2, CQE Timestamp will be incremented every one microsecond)
2443 When sets to Zero, timestamp reporting in the CQE is disabled.
2444 This feature is currently not supported.
2446 pseudo_bit_t hca_core_clock[0x00008];/* Internal Clock Period (in units of 1/16 ns) (QUERY_HCA only) */
2447 /* -------------- */
2448 pseudo_bit_t reserved2[0x00008];
2449 pseudo_bit_t router_qp[0x00010]; /* Upper 16 bit to be used as a QP number for router mode. Low order 8 bits are taken from the TClass field of the incoming packet.
2450 Valid only if RE bit is set */
2451 pseudo_bit_t reserved3[0x00007];
2452 pseudo_bit_t re[0x00001]; /* Router Mode Enable
2453 If this bit is set, entire packet (including all headers and ICRC) will be considered as a data payload and will be scattered to memory as specified in the descriptor that is posted on the QP matching the TClass field of packet. */
2454 /* -------------- */
2455 pseudo_bit_t udp[0x00001]; /* UD Port Check Enable
2456 0 - Port field in Address Vector is ignored
2457 1 - HCA will check the port field in AV entry (fetched for UD descriptor) against the Port of the UD QP executing the descriptor. */
2458 pseudo_bit_t he[0x00001]; /* Host Endianess - Used for Atomic Operations
2459 0 - Host is Little Endian
2460 1 - Host is Big endian
2462 pseudo_bit_t reserved4[0x00001];
2463 pseudo_bit_t ce[0x00001]; /* Checksum Enabled - when Set IPoverIB checksum generation & checking is enabled */
2464 pseudo_bit_t sph[0x00001]; /* 0 - SW calculates TCP/UDP Pseudo-Header checksum and inserts it into the TCP/UDP checksum field when sending a packet
2465 1 - HW calculates TCP/UDP Pseudo-Header checksum when sending a packet
2467 pseudo_bit_t rph[0x00001]; /* 0 - Not HW calculation of TCP/UDP Pseudo-Header checksum are done when receiving a packet
2468 1 - HW calculates TCP/UDP Pseudo-Header checksum when receiving a packet
2470 pseudo_bit_t reserved5[0x00002];
2471 pseudo_bit_t responder_exu[0x00004];/* Indicate the relation between the execution enegines allocation dedicated for responder versus the engines dedicated for reqvester .
2472 responder_exu/16 = (number of responder exu engines)/(total number of engines)
2473 Legal values are 0x0-0xF. 0 is "auto".
2476 pseudo_bit_t reserved6[0x00004];
2477 pseudo_bit_t wqe_quota[0x0000f]; /* Maximum number of WQEs that are executed prior to preemption of execution unit. 0 - reserved. */
2478 pseudo_bit_t wqe_quota_en[0x00001]; /* If set - wqe_quota field is used. If cleared - WQE quota is set to "auto" value */
2479 /* -------------- */
2480 pseudo_bit_t reserved7[0x00040];
2481 /* -------------- */
2482 struct arbelprm_qpcbaseaddr_st qpc_eec_cqc_eqc_rdb_parameters;
2483 /* -------------- */
2484 pseudo_bit_t reserved8[0x00100];
2485 /* -------------- */
2486 struct arbelprm_multicastparam_st multicast_parameters;
2487 /* -------------- */
2488 pseudo_bit_t reserved9[0x00080];
2489 /* -------------- */
2490 struct arbelprm_tptparams_st tpt_parameters;
2491 /* -------------- */
2492 pseudo_bit_t reserved10[0x00080];
2493 /* -------------- */
2494 struct arbelprm_uar_params_st uar_parameters;/* UAR Parameters */
2495 /* -------------- */
2496 pseudo_bit_t reserved11[0x00600];
2497 /* -------------- */
2500 /* Event Queue Context Table Entry */
2502 struct arbelprm_eqc_st { /* Little Endian */
2503 pseudo_bit_t reserved0[0x00008];
2504 pseudo_bit_t st[0x00004]; /* Event delivery state machine
2507 0xB - Always_Armed (auto-rearm)
2509 pseudo_bit_t reserved1[0x00005];
2510 pseudo_bit_t oi[0x00001]; /* Oerrun ignore.
2511 If set, HW will not check EQ full condition when writing new EQEs. */
2512 pseudo_bit_t tr[0x00001]; /* Translation Required. If set - EQ access undergo address translation. */
2513 pseudo_bit_t reserved2[0x00005];
2514 pseudo_bit_t owner[0x00004]; /* 0 - SW ownership
2516 Valid for the QUERY_EQ and HW2SW_EQ commands only */
2517 pseudo_bit_t status[0x00004]; /* EQ status:
2519 1010 - EQ write failure
2520 Valid for the QUERY_EQ and HW2SW_EQ commands only */
2521 /* -------------- */
2522 pseudo_bit_t start_address_h[0x00020];/* Start Address of Event Queue[63:32]. */
2523 /* -------------- */
2524 pseudo_bit_t start_address_l[0x00020];/* Start Address of Event Queue[31:0].
2525 Must be aligned on 32-byte boundary */
2526 /* -------------- */
2527 pseudo_bit_t reserved3[0x00018];
2528 pseudo_bit_t log_eq_size[0x00005]; /* Amount of entries in this EQ is 2^log_eq_size.
2529 Log_eq_size must be bigger than 1.
2530 Maximum EQ size is 2^17 EQEs (max Log_eq_size is 17). */
2531 pseudo_bit_t reserved4[0x00003];
2532 /* -------------- */
2533 pseudo_bit_t reserved5[0x00020];
2534 /* -------------- */
2535 pseudo_bit_t intr[0x00008]; /* Interrupt (message) to be generated to report event to INT layer.
2536 00iiiiii - set to INTA given in QUERY_ADAPTER in order to generate INTA messages on Express.
2537 10jjjjjj - specificies type of interrupt message to be generated (total 64 different messages supported).
2538 All other values are reserved and should not be used.
2540 If interrupt generation is not required, ST field must be set upon creation to Fired state. No EQ arming doorbell should be performed. In this case hardware will not generate any interrupt. */
2541 pseudo_bit_t reserved6[0x00018];
2542 /* -------------- */
2543 pseudo_bit_t pd[0x00018]; /* PD to be used to access EQ */
2544 pseudo_bit_t reserved7[0x00008];
2545 /* -------------- */
2546 pseudo_bit_t lkey[0x00020]; /* Memory key (L-Key) to be used to access EQ */
2547 /* -------------- */
2548 pseudo_bit_t reserved8[0x00040];
2549 /* -------------- */
2550 pseudo_bit_t consumer_indx[0x00020];/* Contains next entry to be read upon polling the event queue.
2551 Must be initalized to zero while opening EQ */
2552 /* -------------- */
2553 pseudo_bit_t producer_indx[0x00020];/* Contains next entry in EQ to be written by the HCA.
2554 Must be initalized to zero while opening EQ. */
2555 /* -------------- */
2556 pseudo_bit_t reserved9[0x00080];
2557 /* -------------- */
2560 /* Memory Translation Table (MTT) Entry */
2562 struct arbelprm_mtt_st { /* Little Endian */
2563 pseudo_bit_t ptag_h[0x00020]; /* High-order bits of physical tag. The size of the field depends on the page size of the region. Maximum PTAG size is 52 bits. */
2564 /* -------------- */
2565 pseudo_bit_t p[0x00001]; /* Present bit. If set, page entry is valid. If cleared, access to this page will generate non-present page access fault. */
2566 pseudo_bit_t reserved0[0x0000b];
2567 pseudo_bit_t ptag_l[0x00014]; /* Low-order bits of Physical tag. The size of the field depends on the page size of the region. Maximum PTAG size is 52 bits. */
2568 /* -------------- */
2571 /* Memory Protection Table (MPT) Entry */
2573 struct arbelprm_mpt_st { /* Little Endian */
2574 pseudo_bit_t reserved0[0x00008];
2575 pseudo_bit_t r_w[0x00001]; /* Defines whether this entry is Region (1) or Window (0) */
2576 pseudo_bit_t pa[0x00001]; /* Physical address. If set, no virtual-to-physical address translation will be performed for this region */
2577 pseudo_bit_t lr[0x00001]; /* If set - local read access enabled */
2578 pseudo_bit_t lw[0x00001]; /* If set - local write access enabled */
2579 pseudo_bit_t rr[0x00001]; /* If set - remote read access enabled. */
2580 pseudo_bit_t rw[0x00001]; /* If set - remote write access enabled */
2581 pseudo_bit_t a[0x00001]; /* If set - remote Atomic access is enabled */
2582 pseudo_bit_t eb[0x00001]; /* If set - Bind is enabled. Valid for region entry only. */
2583 pseudo_bit_t reserved1[0x0000c];
2584 pseudo_bit_t status[0x00004]; /* Region/Window Status
2585 0xF - not valid (SW ownership)
2588 Unbound Type I windows are doneted reg_wnd_len field equals zero.
2589 Unbound Type II windows are donated by Status=FREE. */
2590 /* -------------- */
2591 pseudo_bit_t page_size[0x00005]; /* Page size used for the region. Actual size is [4K]*2^Page_size bytes.
2592 page_size should be less than 20. */
2593 pseudo_bit_t reserved2[0x00002];
2594 pseudo_bit_t type[0x00001]; /* Applicable for windows only, must be zero for regions
2596 1 - Type two window */
2597 pseudo_bit_t qpn[0x00018]; /* QP number this MW is attached to. Valid for type2 memory windows and on QUERY_MPT only */
2598 /* -------------- */
2599 pseudo_bit_t mem_key[0x00020]; /* The memory Key. The field holds the mem_key field in the following semantics: {key[7:0],key[31:8]}.
2601 /* -------------- */
2602 pseudo_bit_t pd[0x00018]; /* Protection Domain */
2603 pseudo_bit_t reserved3[0x00001];
2604 pseudo_bit_t ei[0x00001]; /* Enable Invalidation - When set, Local/Remote invalidation can be executed on this window/region.
2605 Must be set for type2 windows and non-shared physical memory regions.
2606 Must be clear for regions that are used to access Work Queues, Completion Queues and Event Queues */
2607 pseudo_bit_t zb[0x00001]; /* When set, this region is Zero Based Region */
2608 pseudo_bit_t fre[0x00001]; /* When set, Fast Registration Operations can be executed on this region */
2609 pseudo_bit_t rae[0x00001]; /* When set, remote access can be enabled on this region.
2610 Used when executing Fast Registration Work Request to validate that remote access rights can be granted to this MPT.
2611 If the bit is cleared, Fast Registration Work Request requesting remote access rights will fail.
2613 pseudo_bit_t reserved4[0x00003];
2614 /* -------------- */
2615 pseudo_bit_t start_address_h[0x00020];/* Start Address[63:32] - Virtual Address where this region/window starts */
2616 /* -------------- */
2617 pseudo_bit_t start_address_l[0x00020];/* Start Address[31:0] - Virtual Address where this region/window starts */
2618 /* -------------- */
2619 pseudo_bit_t reg_wnd_len_h[0x00020];/* Region/Window Length[63:32] */
2620 /* -------------- */
2621 pseudo_bit_t reg_wnd_len_l[0x00020];/* Region/Window Length[31:0] */
2622 /* -------------- */
2623 pseudo_bit_t lkey[0x00020]; /* Must be 0 for SW2HW_MPT.
2624 On QUERY_MPT and HW2SW_MPT commands for Memory Window it reflects the LKey of the Region that the Window is bound to.
2625 The field holds the lkey field in the following semantics: {key[7:0],key[31:8]}. */
2626 /* -------------- */
2627 pseudo_bit_t win_cnt[0x00020]; /* Number of windows bound to this region. Valid for regions only.
2628 The field is valid only for the QUERY_MPT and HW2SW_MPT commands. */
2629 /* -------------- */
2630 pseudo_bit_t reserved5[0x00020];
2631 /* -------------- */
2632 pseudo_bit_t mtt_adr_h[0x00006]; /* Base (first) address of the MTT relative to MTT base in the ICM */
2633 pseudo_bit_t reserved6[0x0001a];
2634 /* -------------- */
2635 pseudo_bit_t reserved7[0x00003];
2636 pseudo_bit_t mtt_adr_l[0x0001d]; /* Base (first) address of the MTT relative to MTT base address in the ICM. Must be aligned on 8 bytes. */
2637 /* -------------- */
2638 pseudo_bit_t mtt_sz[0x00020]; /* Number of MTT entries allocated for this MR.
2639 When Fast Registration Operations can not be executed on this region (FRE bit is zero) this field is reserved.
2640 When Fast Registration Operation is enabled (FRE bit is set) this field indicates the number of MTTs allocated for this MR. If mtt_sz value is zero, there is no limit for the numbers of MTTs and the HCA does not check this field when executing fast register WQE. */
2641 /* -------------- */
2642 pseudo_bit_t reserved8[0x00040];
2643 /* -------------- */
2646 /* Completion Queue Context Table Entry */
2648 struct arbelprm_completion_queue_context_st { /* Little Endian */
2649 pseudo_bit_t reserved0[0x00008];
2650 pseudo_bit_t st[0x00004]; /* Event delivery state machine
2652 0x9 - ARMED (Request for Notification)
2653 0x6 - ARMED SOLICITED (Request Solicited Notification)
2657 Must be 0x0 in CQ initialization.
2658 Valid for the QUERY_CQ and HW2SW_CQ commands only. */
2659 pseudo_bit_t reserved1[0x00005];
2660 pseudo_bit_t oi[0x00001]; /* When set, overrun ignore is enabled.
2661 When set, Updates of CQ consumer counter (poll for completion) or Request completion notifications (Arm CQ) doorbells should not be rang on that CQ. */
2662 pseudo_bit_t reserved2[0x0000a];
2663 pseudo_bit_t status[0x00004]; /* CQ status
2666 1010 - CQ write failure
2667 Valid for the QUERY_CQ and HW2SW_CQ commands only */
2668 /* -------------- */
2669 pseudo_bit_t start_address_h[0x00020];/* Start address of CQ[63:32].
2670 Must be aligned on CQE size (32 bytes) */
2671 /* -------------- */
2672 pseudo_bit_t start_address_l[0x00020];/* Start address of CQ[31:0].
2673 Must be aligned on CQE size (32 bytes) */
2674 /* -------------- */
2675 pseudo_bit_t usr_page[0x00018]; /* UAR page this CQ can be accessed through (ringinig CQ doorbells) */
2676 pseudo_bit_t log_cq_size[0x00005]; /* Log (base 2) of the CQ size (in entries).
2677 Maximum CQ size is 2^17 CQEs (max log_cq_size is 17) */
2678 pseudo_bit_t reserved3[0x00003];
2679 /* -------------- */
2680 pseudo_bit_t reserved4[0x00020];
2681 /* -------------- */
2682 pseudo_bit_t c_eqn[0x00008]; /* Event Queue this CQ reports completion events to.
2683 Valid values are 0 to 63
2684 If configured to value other than 0-63, completion events will not be reported on the CQ. */
2685 pseudo_bit_t reserved5[0x00018];
2686 /* -------------- */
2687 pseudo_bit_t pd[0x00018]; /* Protection Domain to be used to access CQ.
2688 Must be the same PD of the CQ L_Key. */
2689 pseudo_bit_t reserved6[0x00008];
2690 /* -------------- */
2691 pseudo_bit_t l_key[0x00020]; /* Memory key (L_Key) to be used to access CQ */
2692 /* -------------- */
2693 pseudo_bit_t last_notified_indx[0x00020];/* Maintained by HW.
2694 Valid for QUERY_CQ and HW2SW_CQ commands only. */
2695 /* -------------- */
2696 pseudo_bit_t solicit_producer_indx[0x00020];/* Maintained by HW.
2697 Valid for QUERY_CQ and HW2SW_CQ commands only.
2699 /* -------------- */
2700 pseudo_bit_t consumer_counter[0x00020];/* Consumer counter is a 32bits counter that is incremented for each CQE pooled from the CQ.
2701 Must be 0x0 in CQ initialization.
2702 Valid for the QUERY_CQ and HW2SW_CQ commands only. */
2703 /* -------------- */
2704 pseudo_bit_t producer_counter[0x00020];/* Producer counter is a 32bits counter that is incremented for each CQE that is written by the HW to the CQ.
2705 CQ overrun is reported if Producer_counter + 1 equals to Consumer_counter and a CQE needs to be added..
2706 Maintained by HW (valid for the QUERY_CQ and HW2SW_CQ commands only) */
2707 /* -------------- */
2708 pseudo_bit_t cqn[0x00018]; /* CQ number. Least significant bits are constrained by the position of this CQ in CQC table
2709 Valid for the QUERY_CQ and HW2SW_CQ commands only */
2710 pseudo_bit_t reserved7[0x00008];
2711 /* -------------- */
2712 pseudo_bit_t cq_ci_db_record[0x00020];/* Index in the UAR Context Table Entry.
2713 HW uses this index as an offset from the UAR Context Table Entry in order to read this CQ Consumer Counter doorbell record.
2714 This value can be retrieved from the HW in the QUERY_CQ command. */
2715 /* -------------- */
2716 pseudo_bit_t cq_state_db_record[0x00020];/* Index in the UAR Context Table Entry.
2717 HW uses this index as an offset from the UAR Context Table Entry in order to read this CQ state doorbell record.
2718 This value can be retrieved from the HW in the QUERY_CQ command. */
2719 /* -------------- */
2720 pseudo_bit_t reserved8[0x00020];
2721 /* -------------- */
2724 /* GPIO_event_data */
2726 struct arbelprm_gpio_event_data_st { /* Little Endian */
2727 pseudo_bit_t reserved0[0x00060];
2728 /* -------------- */
2729 pseudo_bit_t gpio_event_hi[0x00020];/* If any bit is set to 1, then a rising/falling event has occurred on the corrsponding GPIO pin. */
2730 /* -------------- */
2731 pseudo_bit_t gpio_event_lo[0x00020];/* If any bit is set to 1, then a rising/falling event has occurred on the corrsponding GPIO pin. */
2732 /* -------------- */
2733 pseudo_bit_t reserved1[0x00020];
2734 /* -------------- */
2737 /* Event_data Field - QP/EE Events */
2739 struct arbelprm_qp_ee_event_st { /* Little Endian */
2740 pseudo_bit_t qpn_een[0x00018]; /* QP/EE/SRQ number event is reported for */
2741 pseudo_bit_t reserved0[0x00008];
2742 /* -------------- */
2743 pseudo_bit_t reserved1[0x00020];
2744 /* -------------- */
2745 pseudo_bit_t reserved2[0x0001c];
2746 pseudo_bit_t e_q[0x00001]; /* If set - EEN if cleared - QP in the QPN/EEN field
2747 Not valid on SRQ events */
2748 pseudo_bit_t reserved3[0x00003];
2749 /* -------------- */
2750 pseudo_bit_t reserved4[0x00060];
2751 /* -------------- */
2754 /* InfiniHost-III-EX Type0 Configuration Header */
2756 struct arbelprm_mt25208_type0_st { /* Little Endian */
2757 pseudo_bit_t vendor_id[0x00010]; /* Hardwired to 0x15B3 */
2758 pseudo_bit_t device_id[0x00010]; /* 25208 (decimal) - InfiniHost-III compatible mode
2759 25218 (decimal) - InfiniHost-III EX mode (the mode described in this manual)
2760 25209 (decimal) - Flash burner mode - see Flash burning application note for further details on this mode
2762 /* -------------- */
2763 pseudo_bit_t command[0x00010]; /* PCI Command Register */
2764 pseudo_bit_t status[0x00010]; /* PCI Status Register */
2765 /* -------------- */
2766 pseudo_bit_t revision_id[0x00008];
2767 pseudo_bit_t class_code_hca_class_code[0x00018];
2768 /* -------------- */
2769 pseudo_bit_t cache_line_size[0x00008];/* Cache Line Size */
2770 pseudo_bit_t latency_timer[0x00008];
2771 pseudo_bit_t header_type[0x00008]; /* hardwired to zero */
2772 pseudo_bit_t bist[0x00008];
2773 /* -------------- */
2774 pseudo_bit_t bar0_ctrl[0x00004]; /* hard-wired to 0100 */
2775 pseudo_bit_t reserved0[0x00010];
2776 pseudo_bit_t bar0_l[0x0000c]; /* Lower bits of BAR0 (Device Configuration Space) */
2777 /* -------------- */
2778 pseudo_bit_t bar0_h[0x00020]; /* Upper 32 bits of BAR0 (Device Configuration Space) */
2779 /* -------------- */
2780 pseudo_bit_t bar1_ctrl[0x00004]; /* Hardwired to 1100 */
2781 pseudo_bit_t reserved1[0x00010];
2782 pseudo_bit_t bar1_l[0x0000c]; /* Lower bits of BAR1 (User Access Region - UAR - space) */
2783 /* -------------- */
2784 pseudo_bit_t bar1_h[0x00020]; /* upper 32 bits of BAR1 (User Access Region - UAR - space) */
2785 /* -------------- */
2786 pseudo_bit_t bar2_ctrl[0x00004]; /* Hardwired to 1100 */
2787 pseudo_bit_t reserved2[0x00010];
2788 pseudo_bit_t bar2_l[0x0000c]; /* Lower bits of BAR2 - Local Attached Memory if present and enabled. Else zeroed. */
2789 /* -------------- */
2790 pseudo_bit_t bar2_h[0x00020]; /* Upper 32 bits of BAR2 - Local Attached Memory if present and enabled. Else zeroed. */
2791 /* -------------- */
2792 pseudo_bit_t cardbus_cis_pointer[0x00020];
2793 /* -------------- */
2794 pseudo_bit_t subsystem_vendor_id[0x00010];/* Specified by the device NVMEM configuration */
2795 pseudo_bit_t subsystem_id[0x00010]; /* Specified by the device NVMEM configuration */
2796 /* -------------- */
2797 pseudo_bit_t expansion_rom_enable[0x00001];/* Expansion ROM Enable. Hardwired to 0 if expansion ROM is disabled in the device NVMEM configuration. */
2798 pseudo_bit_t reserved3[0x0000a];
2799 pseudo_bit_t expansion_rom_base_address[0x00015];/* Expansion ROM Base Address (upper 21 bit). Hardwired to 0 if expansion ROM is disabled in the device NVMEM configuration. */
2800 /* -------------- */
2801 pseudo_bit_t capabilities_pointer[0x00008];/* Specified by the device NVMEM configuration */
2802 pseudo_bit_t reserved4[0x00018];
2803 /* -------------- */
2804 pseudo_bit_t reserved5[0x00020];
2805 /* -------------- */
2806 pseudo_bit_t interrupt_line[0x00008];
2807 pseudo_bit_t interrupt_pin[0x00008];
2808 pseudo_bit_t min_gnt[0x00008];
2809 pseudo_bit_t max_latency[0x00008];
2810 /* -------------- */
2811 pseudo_bit_t reserved6[0x00100];
2812 /* -------------- */
2813 pseudo_bit_t msi_cap_id[0x00008];
2814 pseudo_bit_t msi_next_cap_ptr[0x00008];
2815 pseudo_bit_t msi_en[0x00001];
2816 pseudo_bit_t multiple_msg_cap[0x00003];
2817 pseudo_bit_t multiple_msg_en[0x00003];
2818 pseudo_bit_t cap_64_bit_addr[0x00001];
2819 pseudo_bit_t reserved7[0x00008];
2820 /* -------------- */
2821 pseudo_bit_t msg_addr_l[0x00020];
2822 /* -------------- */
2823 pseudo_bit_t msg_addr_h[0x00020];
2824 /* -------------- */
2825 pseudo_bit_t msg_data[0x00010];
2826 pseudo_bit_t reserved8[0x00010];
2827 /* -------------- */
2828 pseudo_bit_t reserved9[0x00080];
2829 /* -------------- */
2830 pseudo_bit_t pm_cap_id[0x00008]; /* Power management capability ID - 01h */
2831 pseudo_bit_t pm_next_cap_ptr[0x00008];
2832 pseudo_bit_t pm_cap[0x00010]; /* [2:0] Version - 02h
2835 [5] Device specific initialization - 0h
2836 [8:6] AUX current - 0h
2838 [10] D2 support - 0h
2839 [15:11] PME support - 0h */
2840 /* -------------- */
2841 pseudo_bit_t pm_status_control[0x00010];/* [14:13] - Data scale - 0h */
2842 pseudo_bit_t pm_control_status_brdg_ext[0x00008];
2843 pseudo_bit_t data[0x00008];
2844 /* -------------- */
2845 pseudo_bit_t reserved10[0x00040];
2846 /* -------------- */
2847 pseudo_bit_t vpd_cap_id[0x00008]; /* 03h */
2848 pseudo_bit_t vpd_next_cap_id[0x00008];
2849 pseudo_bit_t vpd_address[0x0000f];
2850 pseudo_bit_t f[0x00001];
2851 /* -------------- */
2852 pseudo_bit_t vpd_data[0x00020];
2853 /* -------------- */
2854 pseudo_bit_t reserved11[0x00040];
2855 /* -------------- */
2856 pseudo_bit_t pciex_cap_id[0x00008]; /* PCI-Express capability ID - 10h */
2857 pseudo_bit_t pciex_next_cap_ptr[0x00008];
2858 pseudo_bit_t pciex_cap[0x00010]; /* [3:0] Capability version - 1h
2859 [7:4] Device/Port Type - 0h
2860 [8] Slot implemented - 0h
2861 [13:9] Interrupt message number
2863 /* -------------- */
2864 pseudo_bit_t device_cap[0x00020]; /* [2:0] Max_Payload_Size supported - 2h
2865 [4:3] Phantom Function supported - 0h
2866 [5] Extended Tag Filed supported - 0h
2867 [8:6] Endpoint L0s Acceptable Latency - TBD
2868 [11:9] Endpoint L1 Acceptable Latency - TBD
2869 [12] Attention Button Present - configured through InfiniBurn
2870 [13] Attention Indicator Present - configured through InfiniBurn
2871 [14] Power Indicator Present - configured through InfiniBurn
2872 [25:18] Captured Slot Power Limit Value
2873 [27:26] Captured Slot Power Limit Scale */
2874 /* -------------- */
2875 pseudo_bit_t device_control[0x00010];
2876 pseudo_bit_t device_status[0x00010];
2877 /* -------------- */
2878 pseudo_bit_t link_cap[0x00020]; /* [3:0] Maximum Link Speed - 1h
2879 [9:4] Maximum Link Width - 8h
2880 [11:10] Active State Power Management Support - 3h
2881 [14:12] L0s Exit Latency - TBD
2882 [17:15] L1 Exit Latency - TBD
2883 [31:24] Port Number - 0h */
2884 /* -------------- */
2885 pseudo_bit_t link_control[0x00010];
2886 pseudo_bit_t link_status[0x00010]; /* [3:0] Link Speed - 1h
2887 [9:4] Negotiated Link Width
2888 [12] Slot clock configuration - 1h */
2889 /* -------------- */
2890 pseudo_bit_t reserved12[0x00260];
2891 /* -------------- */
2892 pseudo_bit_t advanced_error_reporting_cap_id[0x00010];/* 0001h. */
2893 pseudo_bit_t capability_version[0x00004];/* 1h */
2894 pseudo_bit_t next_capability_offset[0x0000c];/* 0h */
2895 /* -------------- */
2896 pseudo_bit_t uncorrectable_error_status_register[0x00020];/* 0 Training Error Status
2897 4 Data Link Protocol Error Status
2898 12 Poisoned TLP Status
2899 13 Flow Control Protocol Error Status
2900 14 Completion Timeout Status
2901 15 Completer Abort Status
2902 16 Unexpected Completion Status
2903 17 Receiver Overflow Status
2904 18 Malformed TLP Status
2905 19 ECRC Error Status
2906 20 Unsupported Request Error Status */
2907 /* -------------- */
2908 pseudo_bit_t uncorrectable_error_mask_register[0x00020];/* 0 Training Error Mask
2909 4 Data Link Protocol Error Mask
2910 12 Poisoned TLP Mask
2911 13 Flow Control Protocol Error Mask
2912 14 Completion Timeout Mask
2913 15 Completer Abort Mask
2914 16 Unexpected Completion Mask
2915 17 Receiver Overflow Mask
2916 18 Malformed TLP Mask
2918 20 Unsupported Request Error Mask */
2919 /* -------------- */
2920 pseudo_bit_t uncorrectable_severity_mask_register[0x00020];/* 0 Training Error Severity
2921 4 Data Link Protocol Error Severity
2922 12 Poisoned TLP Severity
2923 13 Flow Control Protocol Error Severity
2924 14 Completion Timeout Severity
2925 15 Completer Abort Severity
2926 16 Unexpected Completion Severity
2927 17 Receiver Overflow Severity
2928 18 Malformed TLP Severity
2929 19 ECRC Error Severity
2930 20 Unsupported Request Error Severity */
2931 /* -------------- */
2932 pseudo_bit_t correctable_error_status_register[0x00020];/* 0 Receiver Error Status
2935 8 REPLAY_NUM Rollover Status
2936 12 Replay Timer Timeout Status */
2937 /* -------------- */
2938 pseudo_bit_t correctable_error_mask_register[0x00020];/* 0 Receiver Error Mask
2941 8 REPLAY_NUM Rollover Mask
2942 12 Replay Timer Timeout Mask */
2943 /* -------------- */
2944 pseudo_bit_t advance_error_capabilities_and_control_register[0x00020];
2945 /* -------------- */
2946 struct arbelprm_header_log_register_st header_log_register;
2947 /* -------------- */
2948 pseudo_bit_t reserved13[0x006a0];
2949 /* -------------- */
2952 /* Event Data Field - Performance Monitor */
2954 struct arbelprm_performance_monitor_event_st { /* Little Endian */
2955 struct arbelprm_performance_monitors_st performance_monitor_snapshot;/* Performance monitor snapshot */
2956 /* -------------- */
2957 pseudo_bit_t monitor_number[0x00008];/* 0x01 - SQPC
2964 pseudo_bit_t reserved0[0x00018];
2965 /* -------------- */
2966 pseudo_bit_t reserved1[0x00040];
2967 /* -------------- */
2970 /* Event_data Field - Page Faults */
2972 struct arbelprm_page_fault_event_data_st { /* Little Endian */
2973 pseudo_bit_t va_h[0x00020]; /* Virtual Address[63:32] this page fault is reported on */
2974 /* -------------- */
2975 pseudo_bit_t va_l[0x00020]; /* Virtual Address[63:32] this page fault is reported on */
2976 /* -------------- */
2977 pseudo_bit_t mem_key[0x00020]; /* Memory Key this page fault is reported on */
2978 /* -------------- */
2979 pseudo_bit_t qp[0x00018]; /* QP this page fault is reported on */
2980 pseudo_bit_t reserved0[0x00003];
2981 pseudo_bit_t a[0x00001]; /* If set the memory access that caused the page fault was atomic */
2982 pseudo_bit_t lw[0x00001]; /* If set the memory access that caused the page fault was local write */
2983 pseudo_bit_t lr[0x00001]; /* If set the memory access that caused the page fault was local read */
2984 pseudo_bit_t rw[0x00001]; /* If set the memory access that caused the page fault was remote write */
2985 pseudo_bit_t rr[0x00001]; /* If set the memory access that caused the page fault was remote read */
2986 /* -------------- */
2987 pseudo_bit_t pd[0x00018]; /* PD this page fault is reported on */
2988 pseudo_bit_t reserved1[0x00008];
2989 /* -------------- */
2990 pseudo_bit_t prefetch_len[0x00020]; /* Indicates how many subsequent pages in the same memory region/window will be accessed by the following transaction after this page fault is resolved. measured in bytes. SW can use this information in order to page-in the subsequent pages if they are not present. */
2991 /* -------------- */
2994 /* WQE segments format */
2996 struct arbelprm_wqe_segment_st { /* Little Endian */
2997 struct arbelprm_send_wqe_segment_st send_wqe_segment;/* Send WQE segment format */
2998 /* -------------- */
2999 pseudo_bit_t reserved0[0x00280];
3000 /* -------------- */
3001 struct arbelprm_wqe_segment_ctrl_mlx_st mlx_wqe_segment_ctrl;/* MLX WQE segment format */
3002 /* -------------- */
3003 pseudo_bit_t reserved1[0x00100];
3004 /* -------------- */
3005 struct arbelprm_wqe_segment_ctrl_recv_st recv_wqe_segment_ctrl;/* Receive segment format */
3006 /* -------------- */
3007 pseudo_bit_t reserved2[0x00080];
3008 /* -------------- */
3011 /* Event_data Field - Port State Change */
3013 struct arbelprm_port_state_change_st { /* Little Endian */
3014 pseudo_bit_t reserved0[0x00040];
3015 /* -------------- */
3016 pseudo_bit_t reserved1[0x0001c];
3017 pseudo_bit_t p[0x00002]; /* Port number (1 or 2) */
3018 pseudo_bit_t reserved2[0x00002];
3019 /* -------------- */
3020 pseudo_bit_t reserved3[0x00060];
3021 /* -------------- */
3024 /* Event_data Field - Completion Queue Error */
3026 struct arbelprm_completion_queue_error_st { /* Little Endian */
3027 pseudo_bit_t cqn[0x00018]; /* CQ number event is reported for */
3028 pseudo_bit_t reserved0[0x00008];
3029 /* -------------- */
3030 pseudo_bit_t reserved1[0x00020];
3031 /* -------------- */
3032 pseudo_bit_t syndrome[0x00008]; /* Error syndrome
3034 0x02 - CQ access violation error */
3035 pseudo_bit_t reserved2[0x00018];
3036 /* -------------- */
3037 pseudo_bit_t reserved3[0x00060];
3038 /* -------------- */
3041 /* Event_data Field - Completion Event */
3043 struct arbelprm_completion_event_st { /* Little Endian */
3044 pseudo_bit_t cqn[0x00018]; /* CQ number event is reported for */
3045 pseudo_bit_t reserved0[0x00008];
3046 /* -------------- */
3047 pseudo_bit_t reserved1[0x000a0];
3048 /* -------------- */
3051 /* Event Queue Entry */
3053 struct arbelprm_event_queue_entry_st { /* Little Endian */
3054 pseudo_bit_t event_sub_type[0x00008];/* Event Sub Type.
3055 Defined for events which have sub types, zero elsewhere. */
3056 pseudo_bit_t reserved0[0x00008];
3057 pseudo_bit_t event_type[0x00008]; /* Event Type */
3058 pseudo_bit_t reserved1[0x00008];
3059 /* -------------- */
3060 pseudo_bit_t event_data[6][0x00020];/* Delivers auxilary data to handle event. */
3061 /* -------------- */
3062 pseudo_bit_t reserved2[0x00007];
3063 pseudo_bit_t owner[0x00001]; /* Owner of the entry
3066 pseudo_bit_t reserved3[0x00018];
3067 /* -------------- */
3070 /* QP/EE State Transitions Command Parameters */
3072 struct arbelprm_qp_ee_state_transitions_st { /* Little Endian */
3073 pseudo_bit_t opt_param_mask[0x00020];/* This field defines which optional parameters are passed. Each bit specifies whether optional parameter is passed (set) or not (cleared). The optparammask is defined for each QP/EE command. */
3074 /* -------------- */
3075 pseudo_bit_t reserved0[0x00020];
3076 /* -------------- */
3077 struct arbelprm_queue_pair_ee_context_entry_st qpc_eec_data;/* QPC/EEC data */
3078 /* -------------- */
3079 pseudo_bit_t reserved1[0x009c0];
3080 /* -------------- */
3083 /* Completion Queue Entry Format */
3085 struct arbelprm_completion_queue_entry_st { /* Little Endian */
3086 pseudo_bit_t my_qpn[0x00018]; /* Indicates the QP for which completion is being reported */
3087 pseudo_bit_t reserved0[0x00004];
3088 pseudo_bit_t ver[0x00004]; /* CQE version.
3089 0 for InfiniHost-III-EX */
3090 /* -------------- */
3091 pseudo_bit_t my_ee[0x00018]; /* EE context (for RD only).
3092 Invalid for Bind and Nop operation on RD.
3093 For non RD services this filed reports the CQE timestamp. The Timestamp is a free running counter that is incremented every TimeStampGranularity tick. The counter rolls-over when it reaches saturation. TimeStampGranularity is configured in the INIT_HCA command. This feature is currently not supported.
3095 pseudo_bit_t checksum_15_8[0x00008];/* Checksum[15:8] - See IPoverIB checksum offloading chapter */
3096 /* -------------- */
3097 pseudo_bit_t rqpn[0x00018]; /* Remote (source) QP number. Valid in Responder CQE only for Datagram QP. */
3098 pseudo_bit_t checksum_7_0[0x00008]; /* Checksum[7:0] - See IPoverIB checksum offloading chapter */
3099 /* -------------- */
3100 pseudo_bit_t rlid[0x00010]; /* Remote (source) LID of the message. Valid in Responder of UD QP CQE only. */
3101 pseudo_bit_t ml_path[0x00007]; /* My (destination) LID path bits - these are the lowemost LMC bits of the DLID in an incoming UD packet, higher bits of this field, that are not part of the LMC bits are zeroed by HW.
3102 Valid in responder of UD QP CQE only.
3103 Invalid if incoming message DLID is the permissive LID or incoming message is multicast. */
3104 pseudo_bit_t g[0x00001]; /* GRH present indicator. Valid in Responder of UD QP CQE only. */
3105 pseudo_bit_t ipok[0x00001]; /* IP OK - See IPoverIB checksum offloading chapter */
3106 pseudo_bit_t reserved1[0x00003];
3107 pseudo_bit_t sl[0x00004]; /* Service Level of the message. Valid in Responder of UD QP CQE only. */
3108 /* -------------- */
3109 pseudo_bit_t immediate_ethertype_pkey_indx_eecredits[0x00020];/* Valid for receive queue completion only.
3110 If Opcode field indicates that this was send/write with immediate, this field contains immediate field of the packet.
3111 If completion corresponds to RAW receive queue, bits 15:0 contain Ethertype field of the packet.
3112 If completion corresponds to GSI receive queue, bits 31:16 contain index in PKey table that matches PKey of the message arrived.
3113 If Opcode field indicates that this was send and invalidate, this field contains the key that was invalidated.
3114 For CQE of send queue of the reliable connection service (but send and invalide), bits [4:0] of this field contain the encoded EEcredits received in last ACK of the message. */
3115 /* -------------- */
3116 pseudo_bit_t byte_cnt[0x00020]; /* Byte count of data actually transferred (valid for receive queue completions only) */
3117 /* -------------- */
3118 pseudo_bit_t reserved2[0x00006];
3119 pseudo_bit_t wqe_adr[0x0001a]; /* Bits 31:6 of WQE virtual address completion is reported for. The 6 least significant bits are zero. */
3120 /* -------------- */
3121 pseudo_bit_t reserved3[0x00007];
3122 pseudo_bit_t owner[0x00001]; /* Owner field. Zero value of this field means SW ownership of CQE. */
3123 pseudo_bit_t reserved4[0x0000f];
3124 pseudo_bit_t s[0x00001]; /* If set, completion is reported for Send queue, if cleared - receive queue. */
3125 pseudo_bit_t opcode[0x00008]; /* The opcode of WQE completion is reported for.
3126 For CQEs corresponding to send completion, NOPCODE field of the WQE is copied to this field.
3127 For CQEs corresponding to receive completions, opcode field of last packet in the message copied to this field.
3128 For CQEs corresponding to the receive queue of QPs mapped to QP1, the opcode will be SEND with Immediate (messages are guaranteed to be SEND only)
3130 The following values are reported in case of completion with error:
3131 0xFE - For completion with error on Receive Queues
3132 0xFF - For completion with error on Send Queues */
3133 /* -------------- */
3138 struct arbelprm_ecc_detect_event_data_st { /* Little Endian */
3139 pseudo_bit_t reserved0[0x00080];
3140 /* -------------- */
3141 pseudo_bit_t cause_lsb[0x00001];
3142 pseudo_bit_t reserved1[0x00002];
3143 pseudo_bit_t cause_msb[0x00001];
3144 pseudo_bit_t reserved2[0x00002];
3145 pseudo_bit_t err_rmw[0x00001];
3146 pseudo_bit_t err_src_id[0x00003];
3147 pseudo_bit_t err_da[0x00002];
3148 pseudo_bit_t err_ba[0x00002];
3149 pseudo_bit_t reserved3[0x00011];
3150 pseudo_bit_t overflow[0x00001];
3151 /* -------------- */
3152 pseudo_bit_t err_ra[0x00010];
3153 pseudo_bit_t err_ca[0x00010];
3154 /* -------------- */
3157 /* Event_data Field - ECC Detection Event */
3159 struct arbelprm_scrubbing_event_st { /* Little Endian */
3160 pseudo_bit_t reserved0[0x00080];
3161 /* -------------- */
3162 pseudo_bit_t cause_lsb[0x00001]; /* data integrity error cause:
3163 single ECC error in the 64bit lsb data, on the rise edge of the clock */
3164 pseudo_bit_t reserved1[0x00002];
3165 pseudo_bit_t cause_msb[0x00001]; /* data integrity error cause:
3166 single ECC error in the 64bit msb data, on the fall edge of the clock */
3167 pseudo_bit_t reserved2[0x00002];
3168 pseudo_bit_t err_rmw[0x00001]; /* transaction type:
3170 1 - read/modify/write */
3171 pseudo_bit_t err_src_id[0x00003]; /* source of the transaction: 0x4 - PCI, other - internal or IB */
3172 pseudo_bit_t err_da[0x00002]; /* Error DIMM address */
3173 pseudo_bit_t err_ba[0x00002]; /* Error bank address */
3174 pseudo_bit_t reserved3[0x00011];
3175 pseudo_bit_t overflow[0x00001]; /* Fatal: ECC error FIFO overflow - ECC errors were detected, which may or may not have been corrected by InfiniHost-III-EX */
3176 /* -------------- */
3177 pseudo_bit_t err_ra[0x00010]; /* Error row address */
3178 pseudo_bit_t err_ca[0x00010]; /* Error column address */
3179 /* -------------- */
3182 /* Miscellaneous Counters */
3184 struct arbelprm_misc_counters_st { /* Little Endian */
3185 pseudo_bit_t ddr_scan_cnt[0x00020]; /* Number of times whole of LAM was scanned */
3186 /* -------------- */
3187 pseudo_bit_t reserved0[0x007e0];
3188 /* -------------- */
3191 /* LAM_EN Output Parameter */
3193 struct arbelprm_lam_en_out_param_st { /* Little Endian */
3194 pseudo_bit_t reserved0[0x00040];
3195 /* -------------- */
3198 /* Extended_Completion_Queue_Entry */
3200 struct arbelprm_extended_completion_queue_entry_st { /* Little Endian */
3201 pseudo_bit_t reserved0[0x00020];
3202 /* -------------- */
3207 struct arbelprm_eq_cmd_doorbell_st { /* Little Endian */
3208 pseudo_bit_t reserved0[0x00020];
3209 /* -------------- */
3214 struct arbelprm_arbel_prm_st { /* Little Endian */
3215 struct arbelprm_completion_queue_entry_st completion_queue_entry;/* Completion Queue Entry Format */
3216 /* -------------- */
3217 pseudo_bit_t reserved0[0x7ff00];
3218 /* -------------- */
3219 struct arbelprm_qp_ee_state_transitions_st qp_ee_state_transitions;/* QP/EE State Transitions Command Parameters */
3220 /* -------------- */
3221 pseudo_bit_t reserved1[0x7f000];
3222 /* -------------- */
3223 struct arbelprm_event_queue_entry_st event_queue_entry;/* Event Queue Entry */
3224 /* -------------- */
3225 pseudo_bit_t reserved2[0x7ff00];
3226 /* -------------- */
3227 struct arbelprm_completion_event_st completion_event;/* Event_data Field - Completion Event */
3228 /* -------------- */
3229 pseudo_bit_t reserved3[0x7ff40];
3230 /* -------------- */
3231 struct arbelprm_completion_queue_error_st completion_queue_error;/* Event_data Field - Completion Queue Error */
3232 /* -------------- */
3233 pseudo_bit_t reserved4[0x7ff40];
3234 /* -------------- */
3235 struct arbelprm_port_state_change_st port_state_change;/* Event_data Field - Port State Change */
3236 /* -------------- */
3237 pseudo_bit_t reserved5[0x7ff40];
3238 /* -------------- */
3239 struct arbelprm_wqe_segment_st wqe_segment;/* WQE segments format */
3240 /* -------------- */
3241 pseudo_bit_t reserved6[0x7f000];
3242 /* -------------- */
3243 struct arbelprm_page_fault_event_data_st page_fault_event_data;/* Event_data Field - Page Faults */
3244 /* -------------- */
3245 pseudo_bit_t reserved7[0x7ff40];
3246 /* -------------- */
3247 struct arbelprm_performance_monitor_event_st performance_monitor_event;/* Event Data Field - Performance Monitor */
3248 /* -------------- */
3249 pseudo_bit_t reserved8[0xfff20];
3250 /* -------------- */
3251 struct arbelprm_mt25208_type0_st mt25208_type0;/* InfiniHost-III-EX Type0 Configuration Header */
3252 /* -------------- */
3253 pseudo_bit_t reserved9[0x7f000];
3254 /* -------------- */
3255 struct arbelprm_qp_ee_event_st qp_ee_event;/* Event_data Field - QP/EE Events */
3256 /* -------------- */
3257 pseudo_bit_t reserved10[0x00040];
3258 /* -------------- */
3259 struct arbelprm_gpio_event_data_st gpio_event_data;
3260 /* -------------- */
3261 pseudo_bit_t reserved11[0x7fe40];
3262 /* -------------- */
3263 struct arbelprm_ud_address_vector_st ud_address_vector;/* UD Address Vector */
3264 /* -------------- */
3265 pseudo_bit_t reserved12[0x7ff00];
3266 /* -------------- */
3267 struct arbelprm_queue_pair_ee_context_entry_st queue_pair_ee_context_entry;/* QP and EE Context Entry */
3268 /* -------------- */
3269 pseudo_bit_t reserved13[0x7fa00];
3270 /* -------------- */
3271 struct arbelprm_address_path_st address_path;/* Address Path */
3272 /* -------------- */
3273 pseudo_bit_t reserved14[0x7ff00];
3274 /* -------------- */
3275 struct arbelprm_completion_queue_context_st completion_queue_context;/* Completion Queue Context Table Entry */
3276 /* -------------- */
3277 pseudo_bit_t reserved15[0x7fe00];
3278 /* -------------- */
3279 struct arbelprm_mpt_st mpt; /* Memory Protection Table (MPT) Entry */
3280 /* -------------- */
3281 pseudo_bit_t reserved16[0x7fe00];
3282 /* -------------- */
3283 struct arbelprm_mtt_st mtt; /* Memory Translation Table (MTT) Entry */
3284 /* -------------- */
3285 pseudo_bit_t reserved17[0x7ffc0];
3286 /* -------------- */
3287 struct arbelprm_eqc_st eqc; /* Event Queue Context Table Entry */
3288 /* -------------- */
3289 pseudo_bit_t reserved18[0x7fe00];
3290 /* -------------- */
3291 struct arbelprm_performance_monitors_st performance_monitors;/* Performance Monitors */
3292 /* -------------- */
3293 pseudo_bit_t reserved19[0x7ff80];
3294 /* -------------- */
3295 struct arbelprm_hca_command_register_st hca_command_register;/* HCA Command Register (HCR) */
3296 /* -------------- */
3297 pseudo_bit_t reserved20[0xfff20];
3298 /* -------------- */
3299 struct arbelprm_init_hca_st init_hca;/* INIT_HCA & QUERY_HCA Parameters Block */
3300 /* -------------- */
3301 pseudo_bit_t reserved21[0x7f000];
3302 /* -------------- */
3303 struct arbelprm_qpcbaseaddr_st qpcbaseaddr;/* QPC/EEC/CQC/EQC/RDB Parameters */
3304 /* -------------- */
3305 pseudo_bit_t reserved22[0x7fc00];
3306 /* -------------- */
3307 struct arbelprm_udavtable_memory_parameters_st udavtable_memory_parameters;/* Memory Access Parameters for UD Address Vector Table */
3308 /* -------------- */
3309 pseudo_bit_t reserved23[0x7ffc0];
3310 /* -------------- */
3311 struct arbelprm_multicastparam_st multicastparam;/* Multicast Support Parameters */
3312 /* -------------- */
3313 pseudo_bit_t reserved24[0x7ff00];
3314 /* -------------- */
3315 struct arbelprm_tptparams_st tptparams;/* Translation and Protection Tables Parameters */
3316 /* -------------- */
3317 pseudo_bit_t reserved25[0x7ff00];
3318 /* -------------- */
3319 struct arbelprm_enable_lam_st enable_lam;/* ENABLE_LAM Parameters Block */
3320 /* -------------- */
3321 struct arbelprm_access_lam_st access_lam;
3322 /* -------------- */
3323 pseudo_bit_t reserved26[0x7f700];
3324 /* -------------- */
3325 struct arbelprm_dimminfo_st dimminfo;/* Logical DIMM Information */
3326 /* -------------- */
3327 pseudo_bit_t reserved27[0x7ff00];
3328 /* -------------- */
3329 struct arbelprm_query_fw_st query_fw;/* QUERY_FW Parameters Block */
3330 /* -------------- */
3331 pseudo_bit_t reserved28[0x7f800];
3332 /* -------------- */
3333 struct arbelprm_query_adapter_st query_adapter;/* QUERY_ADAPTER Parameters Block */
3334 /* -------------- */
3335 pseudo_bit_t reserved29[0x7f800];
3336 /* -------------- */
3337 struct arbelprm_query_dev_lim_st query_dev_lim;/* Query Device Limitations */
3338 /* -------------- */
3339 pseudo_bit_t reserved30[0x7f800];
3340 /* -------------- */
3341 struct arbelprm_uar_params_st uar_params;/* UAR Parameters */
3342 /* -------------- */
3343 pseudo_bit_t reserved31[0x7ff00];
3344 /* -------------- */
3345 struct arbelprm_init_ib_st init_ib; /* INIT_IB Parameters */
3346 /* -------------- */
3347 pseudo_bit_t reserved32[0x7f800];
3348 /* -------------- */
3349 struct arbelprm_mgm_entry_st mgm_entry;/* Multicast Group Member */
3350 /* -------------- */
3351 pseudo_bit_t reserved33[0x7fe00];
3352 /* -------------- */
3353 struct arbelprm_set_ib_st set_ib; /* SET_IB Parameters */
3354 /* -------------- */
3355 pseudo_bit_t reserved34[0x7fe00];
3356 /* -------------- */
3357 struct arbelprm_rd_send_doorbell_st rd_send_doorbell;/* RD-send doorbell */
3358 /* -------------- */
3359 pseudo_bit_t reserved35[0x7ff80];
3360 /* -------------- */
3361 struct arbelprm_send_doorbell_st send_doorbell;/* Send doorbell */
3362 /* -------------- */
3363 pseudo_bit_t reserved36[0x7ffc0];
3364 /* -------------- */
3365 struct arbelprm_receive_doorbell_st receive_doorbell;/* Receive doorbell */
3366 /* -------------- */
3367 pseudo_bit_t reserved37[0x7ffc0];
3368 /* -------------- */
3369 struct arbelprm_cq_cmd_doorbell_st cq_cmd_doorbell;/* CQ Doorbell */
3370 /* -------------- */
3371 pseudo_bit_t reserved38[0xfffc0];
3372 /* -------------- */
3373 struct arbelprm_uar_st uar; /* User Access Region */
3374 /* -------------- */
3375 pseudo_bit_t reserved39[0x7c000];
3376 /* -------------- */
3377 struct arbelprm_mgmqp_st mgmqp; /* Multicast Group Member QP */
3378 /* -------------- */
3379 pseudo_bit_t reserved40[0x7ffe0];
3380 /* -------------- */
3381 struct arbelprm_query_debug_msg_st query_debug_msg;/* Query Debug Message */
3382 /* -------------- */
3383 pseudo_bit_t reserved41[0x7f800];
3384 /* -------------- */
3385 struct arbelprm_mad_ifc_st mad_ifc; /* MAD_IFC Input Mailbox */
3386 /* -------------- */
3387 pseudo_bit_t reserved42[0x00900];
3388 /* -------------- */
3389 struct arbelprm_mad_ifc_input_modifier_st mad_ifc_input_modifier;/* MAD_IFC Input Modifier */
3390 /* -------------- */
3391 pseudo_bit_t reserved43[0x7e6e0];
3392 /* -------------- */
3393 struct arbelprm_resize_cq_st resize_cq;/* Resize CQ Input Mailbox */
3394 /* -------------- */
3395 pseudo_bit_t reserved44[0x7fe00];
3396 /* -------------- */
3397 struct arbelprm_completion_with_error_st completion_with_error;/* Completion with Error CQE */
3398 /* -------------- */
3399 pseudo_bit_t reserved45[0x7ff00];
3400 /* -------------- */
3401 struct arbelprm_hcr_completion_event_st hcr_completion_event;/* Event_data Field - HCR Completion Event */
3402 /* -------------- */
3403 pseudo_bit_t reserved46[0x7ff40];
3404 /* -------------- */
3405 struct arbelprm_transport_and_ci_error_counters_st transport_and_ci_error_counters;/* Transport and CI Error Counters */
3406 /* -------------- */
3407 pseudo_bit_t reserved47[0x7f000];
3408 /* -------------- */
3409 struct arbelprm_performance_counters_st performance_counters;/* Performance Counters */
3410 /* -------------- */
3411 pseudo_bit_t reserved48[0x9ff800];
3412 /* -------------- */
3413 struct arbelprm_fast_registration_segment_st fast_registration_segment;/* Fast Registration Segment */
3414 /* -------------- */
3415 pseudo_bit_t reserved49[0x7ff00];
3416 /* -------------- */
3417 struct arbelprm_pbl_st pbl; /* Physical Buffer List */
3418 /* -------------- */
3419 pseudo_bit_t reserved50[0x7ff00];
3420 /* -------------- */
3421 struct arbelprm_srq_context_st srq_context;/* SRQ Context */
3422 /* -------------- */
3423 pseudo_bit_t reserved51[0x7fe80];
3424 /* -------------- */
3425 struct arbelprm_mod_stat_cfg_st mod_stat_cfg;/* MOD_STAT_CFG */
3426 /* -------------- */
3427 pseudo_bit_t reserved52[0x7f800];
3428 /* -------------- */
3429 struct arbelprm_virtual_physical_mapping_st virtual_physical_mapping;/* Virtual and Physical Mapping */
3430 /* -------------- */
3431 pseudo_bit_t reserved53[0x7ff80];
3432 /* -------------- */
3433 struct arbelprm_cq_ci_db_record_st cq_ci_db_record;/* CQ_CI_DB_Record */
3434 /* -------------- */
3435 pseudo_bit_t reserved54[0x7ffc0];
3436 /* -------------- */
3437 struct arbelprm_cq_arm_db_record_st cq_arm_db_record;/* CQ_ARM_DB_Record */
3438 /* -------------- */
3439 pseudo_bit_t reserved55[0x7ffc0];
3440 /* -------------- */
3441 struct arbelprm_qp_db_record_st qp_db_record;/* QP_DB_Record */
3442 /* -------------- */
3443 pseudo_bit_t reserved56[0x1fffc0];
3444 /* -------------- */
3445 struct arbelprm_configuration_registers_st configuration_registers;/* InfiniHost III EX Configuration Registers */
3446 /* -------------- */
3447 struct arbelprm_eq_set_ci_table_st eq_set_ci_table;/* EQ Set CI DBs Table */
3448 /* -------------- */
3449 pseudo_bit_t reserved57[0x01000];
3450 /* -------------- */
3451 struct arbelprm_eq_arm_db_region_st eq_arm_db_region;/* EQ Arm Doorbell Region */
3452 /* -------------- */
3453 pseudo_bit_t reserved58[0x00fc0];
3454 /* -------------- */
3455 struct arbelprm_clr_int_st clr_int; /* Clear Interrupt Register */
3456 /* -------------- */
3457 pseudo_bit_t reserved59[0xffcfc0];
3458 /* -------------- */
3460 #endif /* H_prefix_arbelprm_bits_fixnames_MT25218_PRM_csp_H */
Code Review / kvmfornfv.git / blob