qemu/hw/i2c/exynos4210_i2c.c

   1 /*
   2  *  Exynos4210 I2C Bus Serial Interface Emulation
   3  *
   4  *  Copyright (C) 2012 Samsung Electronics Co Ltd.
   5  *    Maksim Kozlov, <m.kozlov@samsung.com>
   6  *    Igor Mitsyanko, <i.mitsyanko@samsung.com>
   7  *
   8  *  This program is free software; you can redistribute it and/or modify it
   9  *  under the terms of the GNU General Public License as published by the
  10  *  Free Software Foundation; either version 2 of the License, or
  11  *  (at your option) any later version.
  12  *
  13  *  This program is distributed in the hope that it will be useful, but WITHOUT
  14  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  15  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
  16  *  for more details.
  17  *
  18  *  You should have received a copy of the GNU General Public License along
  19  *  with this program; if not, see <http://www.gnu.org/licenses/>.
  20  *
  21  */
  22
  23 #include "qemu/timer.h"
  24 #include "hw/sysbus.h"
  25 #include "hw/i2c/i2c.h"
  26
  27 #ifndef EXYNOS4_I2C_DEBUG
  28 #define EXYNOS4_I2C_DEBUG                 0
  29 #endif
  30
  31 #define TYPE_EXYNOS4_I2C                  "exynos4210.i2c"
  32 #define EXYNOS4_I2C(obj)                  \
  33     OBJECT_CHECK(Exynos4210I2CState, (obj), TYPE_EXYNOS4_I2C)
  34
  35 /* Exynos4210 I2C memory map */
  36 #define EXYNOS4_I2C_MEM_SIZE              0x14
  37 #define I2CCON_ADDR                       0x00  /* control register */
  38 #define I2CSTAT_ADDR                      0x04  /* control/status register */
  39 #define I2CADD_ADDR                       0x08  /* address register */
  40 #define I2CDS_ADDR                        0x0c  /* data shift register */
  41 #define I2CLC_ADDR                        0x10  /* line control register */
  42
  43 #define I2CCON_ACK_GEN                    (1 << 7)
  44 #define I2CCON_INTRS_EN                   (1 << 5)
  45 #define I2CCON_INT_PEND                   (1 << 4)
  46
  47 #define EXYNOS4_I2C_MODE(reg)             (((reg) >> 6) & 3)
  48 #define I2C_IN_MASTER_MODE(reg)           (((reg) >> 6) & 2)
  49 #define I2CMODE_MASTER_Rx                 0x2
  50 #define I2CMODE_MASTER_Tx                 0x3
  51 #define I2CSTAT_LAST_BIT                  (1 << 0)
  52 #define I2CSTAT_OUTPUT_EN                 (1 << 4)
  53 #define I2CSTAT_START_BUSY                (1 << 5)
  54
  55
  56 #if EXYNOS4_I2C_DEBUG
  57 #define DPRINT(fmt, args...)              \
  58     do { fprintf(stderr, "QEMU I2C: "fmt, ## args); } while (0)
  59
  60 static const char *exynos4_i2c_get_regname(unsigned offset)
  61 {
  62     switch (offset) {
  63     case I2CCON_ADDR:
  64         return "I2CCON";
  65     case I2CSTAT_ADDR:
  66         return "I2CSTAT";
  67     case I2CADD_ADDR:
  68         return "I2CADD";
  69     case I2CDS_ADDR:
  70         return "I2CDS";
  71     case I2CLC_ADDR:
  72         return "I2CLC";
  73     default:
  74         return "[?]";
  75     }
  76 }
  77
  78 #else
  79 #define DPRINT(fmt, args...)              do { } while (0)
  80 #endif
  81
  82 typedef struct Exynos4210I2CState {
  83     SysBusDevice parent_obj;
  84
  85     MemoryRegion iomem;
  86     I2CBus *bus;
  87     qemu_irq irq;
  88
  89     uint8_t i2ccon;
  90     uint8_t i2cstat;
  91     uint8_t i2cadd;
  92     uint8_t i2cds;
  93     uint8_t i2clc;
  94     bool scl_free;
  95 } Exynos4210I2CState;
  96
  97 static inline void exynos4210_i2c_raise_interrupt(Exynos4210I2CState *s)
  98 {
  99     if (s->i2ccon & I2CCON_INTRS_EN) {
 100         s->i2ccon |= I2CCON_INT_PEND;
 101         qemu_irq_raise(s->irq);
 102     }
 103 }
 104
 105 static void exynos4210_i2c_data_receive(void *opaque)
 106 {
 107     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
 108     int ret;
 109
 110     s->i2cstat &= ~I2CSTAT_LAST_BIT;
 111     s->scl_free = false;
 112     ret = i2c_recv(s->bus);
 113     if (ret < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
 114         s->i2cstat |= I2CSTAT_LAST_BIT;  /* Data is not acknowledged */
 115     } else {
 116         s->i2cds = ret;
 117     }
 118     exynos4210_i2c_raise_interrupt(s);
 119 }
 120
 121 static void exynos4210_i2c_data_send(void *opaque)
 122 {
 123     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
 124
 125     s->i2cstat &= ~I2CSTAT_LAST_BIT;
 126     s->scl_free = false;
 127     if (i2c_send(s->bus, s->i2cds) < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
 128         s->i2cstat |= I2CSTAT_LAST_BIT;
 129     }
 130     exynos4210_i2c_raise_interrupt(s);
 131 }
 132
 133 static uint64_t exynos4210_i2c_read(void *opaque, hwaddr offset,
 134                                  unsigned size)
 135 {
 136     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
 137     uint8_t value;
 138
 139     switch (offset) {
 140     case I2CCON_ADDR:
 141         value = s->i2ccon;
 142         break;
 143     case I2CSTAT_ADDR:
 144         value = s->i2cstat;
 145         break;
 146     case I2CADD_ADDR:
 147         value = s->i2cadd;
 148         break;
 149     case I2CDS_ADDR:
 150         value = s->i2cds;
 151         s->scl_free = true;
 152         if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx &&
 153                (s->i2cstat & I2CSTAT_START_BUSY) &&
 154                !(s->i2ccon & I2CCON_INT_PEND)) {
 155             exynos4210_i2c_data_receive(s);
 156         }
 157         break;
 158     case I2CLC_ADDR:
 159         value = s->i2clc;
 160         break;
 161     default:
 162         value = 0;
 163         DPRINT("ERROR: Bad read offset 0x%x\n", (unsigned int)offset);
 164         break;
 165     }
 166
 167     DPRINT("read %s [0x%02x] -> 0x%02x\n", exynos4_i2c_get_regname(offset),
 168             (unsigned int)offset, value);
 169     return value;
 170 }
 171
 172 static void exynos4210_i2c_write(void *opaque, hwaddr offset,
 173                               uint64_t value, unsigned size)
 174 {
 175     Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
 176     uint8_t v = value & 0xff;
 177
 178     DPRINT("write %s [0x%02x] <- 0x%02x\n", exynos4_i2c_get_regname(offset),
 179             (unsigned int)offset, v);
 180
 181     switch (offset) {
 182     case I2CCON_ADDR:
 183         s->i2ccon = (v & ~I2CCON_INT_PEND) | (s->i2ccon & I2CCON_INT_PEND);
 184         if ((s->i2ccon & I2CCON_INT_PEND) && !(v & I2CCON_INT_PEND)) {
 185             s->i2ccon &= ~I2CCON_INT_PEND;
 186             qemu_irq_lower(s->irq);
 187             if (!(s->i2ccon & I2CCON_INTRS_EN)) {
 188                 s->i2cstat &= ~I2CSTAT_START_BUSY;
 189             }
 190
 191             if (s->i2cstat & I2CSTAT_START_BUSY) {
 192                 if (s->scl_free) {
 193                     if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx) {
 194                         exynos4210_i2c_data_send(s);
 195                     } else if (EXYNOS4_I2C_MODE(s->i2cstat) ==
 196                             I2CMODE_MASTER_Rx) {
 197                         exynos4210_i2c_data_receive(s);
 198                     }
 199                 } else {
 200                     s->i2ccon |= I2CCON_INT_PEND;
 201                     qemu_irq_raise(s->irq);
 202                 }
 203             }
 204         }
 205         break;
 206     case I2CSTAT_ADDR:
 207         s->i2cstat =
 208                 (s->i2cstat & I2CSTAT_START_BUSY) | (v & ~I2CSTAT_START_BUSY);
 209
 210         if (!(s->i2cstat & I2CSTAT_OUTPUT_EN)) {
 211             s->i2cstat &= ~I2CSTAT_START_BUSY;
 212             s->scl_free = true;
 213             qemu_irq_lower(s->irq);
 214             break;
 215         }
 216
 217         /* Nothing to do if in i2c slave mode */
 218         if (!I2C_IN_MASTER_MODE(s->i2cstat)) {
 219             break;
 220         }
 221
 222         if (v & I2CSTAT_START_BUSY) {
 223             s->i2cstat &= ~I2CSTAT_LAST_BIT;
 224             s->i2cstat |= I2CSTAT_START_BUSY;    /* Line is busy */
 225             s->scl_free = false;
 226
 227             /* Generate start bit and send slave address */
 228             if (i2c_start_transfer(s->bus, s->i2cds >> 1, s->i2cds & 0x1) &&
 229                     (s->i2ccon & I2CCON_ACK_GEN)) {
 230                 s->i2cstat |= I2CSTAT_LAST_BIT;
 231             } else if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx) {
 232                 exynos4210_i2c_data_receive(s);
 233             }
 234             exynos4210_i2c_raise_interrupt(s);
 235         } else {
 236             i2c_end_transfer(s->bus);
 237             if (!(s->i2ccon & I2CCON_INT_PEND)) {
 238                 s->i2cstat &= ~I2CSTAT_START_BUSY;
 239             }
 240             s->scl_free = true;
 241         }
 242         break;
 243     case I2CADD_ADDR:
 244         if ((s->i2cstat & I2CSTAT_OUTPUT_EN) == 0) {
 245             s->i2cadd = v;
 246         }
 247         break;
 248     case I2CDS_ADDR:
 249         if (s->i2cstat & I2CSTAT_OUTPUT_EN) {
 250             s->i2cds = v;
 251             s->scl_free = true;
 252             if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx &&
 253                     (s->i2cstat & I2CSTAT_START_BUSY) &&
 254                     !(s->i2ccon & I2CCON_INT_PEND)) {
 255                 exynos4210_i2c_data_send(s);
 256             }
 257         }
 258         break;
 259     case I2CLC_ADDR:
 260         s->i2clc = v;
 261         break;
 262     default:
 263         DPRINT("ERROR: Bad write offset 0x%x\n", (unsigned int)offset);
 264         break;
 265     }
 266 }
 267
 268 static const MemoryRegionOps exynos4210_i2c_ops = {
 269     .read = exynos4210_i2c_read,
 270     .write = exynos4210_i2c_write,
 271     .endianness = DEVICE_NATIVE_ENDIAN,
 272 };
 273
 274 static const VMStateDescription exynos4210_i2c_vmstate = {
 275     .name = "exynos4210.i2c",
 276     .version_id = 1,
 277     .minimum_version_id = 1,
 278     .fields = (VMStateField[]) {
 279         VMSTATE_UINT8(i2ccon, Exynos4210I2CState),
 280         VMSTATE_UINT8(i2cstat, Exynos4210I2CState),
 281         VMSTATE_UINT8(i2cds, Exynos4210I2CState),
 282         VMSTATE_UINT8(i2cadd, Exynos4210I2CState),
 283         VMSTATE_UINT8(i2clc, Exynos4210I2CState),
 284         VMSTATE_BOOL(scl_free, Exynos4210I2CState),
 285         VMSTATE_END_OF_LIST()
 286     }
 287 };
 288
 289 static void exynos4210_i2c_reset(DeviceState *d)
 290 {
 291     Exynos4210I2CState *s = EXYNOS4_I2C(d);
 292
 293     s->i2ccon  = 0x00;
 294     s->i2cstat = 0x00;
 295     s->i2cds   = 0xFF;
 296     s->i2clc   = 0x00;
 297     s->i2cadd  = 0xFF;
 298     s->scl_free = true;
 299 }
 300
 301 static int exynos4210_i2c_realize(SysBusDevice *sbd)
 302 {
 303     DeviceState *dev = DEVICE(sbd);
 304     Exynos4210I2CState *s = EXYNOS4_I2C(dev);
 305
 306     memory_region_init_io(&s->iomem, OBJECT(s), &exynos4210_i2c_ops, s,
 307                           TYPE_EXYNOS4_I2C, EXYNOS4_I2C_MEM_SIZE);
 308     sysbus_init_mmio(sbd, &s->iomem);
 309     sysbus_init_irq(sbd, &s->irq);
 310     s->bus = i2c_init_bus(dev, "i2c");
 311     return 0;
 312 }
 313
 314 static void exynos4210_i2c_class_init(ObjectClass *klass, void *data)
 315 {
 316     DeviceClass *dc = DEVICE_CLASS(klass);
 317     SysBusDeviceClass *sbdc = SYS_BUS_DEVICE_CLASS(klass);
 318
 319     dc->vmsd = &exynos4210_i2c_vmstate;
 320     dc->reset = exynos4210_i2c_reset;
 321     sbdc->init = exynos4210_i2c_realize;
 322 }
 323
 324 static const TypeInfo exynos4210_i2c_type_info = {
 325     .name = TYPE_EXYNOS4_I2C,
 326     .parent = TYPE_SYS_BUS_DEVICE,
 327     .instance_size = sizeof(Exynos4210I2CState),
 328     .class_init = exynos4210_i2c_class_init,
 329 };
 330
 331 static void exynos4210_i2c_register_types(void)
 332 {
 333     type_register_static(&exynos4210_i2c_type_info);
 334 }
 335
 336 type_init(exynos4210_i2c_register_types)