Add qemu 2.4.0
[kvmfornfv.git] / qemu / docs / specs / pci-ids.txt
1
2 PCI IDs for qemu
3 ================
4
5 Red Hat, Inc. donates a part of its device ID range to qemu, to be used for
6 virtual devices.  The vendor IDs are 1af4 (formerly Qumranet ID) and 1b36.
7
8 Contact Gerd Hoffmann <kraxel@redhat.com> to get a device ID assigned
9 for your devices.
10
11 1af4 vendor ID
12 --------------
13
14 The 1000 -> 10ff device ID range is used as follows for virtio-pci devices.
15 Note that this allocation separate from the virtio device IDs, which are
16 maintained as part of the virtio specification.
17
18 1af4:1000  network device
19 1af4:1001  block device
20 1af4:1002  balloon device
21 1af4:1003  console device
22 1af4:1004  SCSI host bus adapter device
23 1af4:1005  entropy generator device
24 1af4:1009  9p filesystem device
25
26 1af4:10f0  Available for experimental usage without registration.  Must get
27    to      official ID when the code leaves the test lab (i.e. when seeking
28 1af4:10ff  upstream merge or shipping a distro/product) to avoid conflicts.
29
30 1af4:1100  Used as PCI Subsystem ID for existing hardware devices emulated
31            by qemu.
32
33 1af4:1110  ivshmem device (shared memory, docs/specs/ivshmem_device_spec.txt)
34
35 All other device IDs are reserved.
36
37 1b36 vendor ID
38 --------------
39
40 The 0000 -> 00ff device ID range is used as follows for QEMU-specific
41 PCI devices (other than virtio):
42
43 1b36:0001  PCI-PCI bridge
44 1b36:0002  PCI serial port (16550A) adapter (docs/specs/pci-serial.txt)
45 1b36:0003  PCI Dual-port 16550A adapter (docs/specs/pci-serial.txt)
46 1b36:0004  PCI Quad-port 16550A adapter (docs/specs/pci-serial.txt)
47 1b36:0005  PCI test device (docs/specs/pci-testdev.txt)
48 1b36:0006  PCI Rocker Ethernet switch device
49 1b36:0007  PCI SD Card Host Controller Interface (SDHCI)
50 1b36:000a  PCI-PCI bridge (multiseat)
51
52 All these devices are documented in docs/specs.
53
54 The 0100 device ID is used for the QXL video card device.