Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / sound / soc / soc-jack.c
1 /*
2  * soc-jack.c  --  ALSA SoC jack handling
3  *
4  * Copyright 2008 Wolfson Microelectronics PLC.
5  *
6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7  *
8  *  This program is free software; you can redistribute  it and/or modify it
9  *  under  the terms of  the GNU General  Public License as published by the
10  *  Free Software Foundation;  either version 2 of the  License, or (at your
11  *  option) any later version.
12  */
13
14 #include <sound/jack.h>
15 #include <sound/soc.h>
16 #include <linux/gpio.h>
17 #include <linux/gpio/consumer.h>
18 #include <linux/interrupt.h>
19 #include <linux/workqueue.h>
20 #include <linux/delay.h>
21 #include <linux/export.h>
22 #include <trace/events/asoc.h>
23
24 /**
25  * snd_soc_card_jack_new - Create a new jack
26  * @card:  ASoC card
27  * @id:    an identifying string for this jack
28  * @type:  a bitmask of enum snd_jack_type values that can be detected by
29  *         this jack
30  * @jack:  structure to use for the jack
31  * @pins:  Array of jack pins to be added to the jack or NULL
32  * @num_pins: Number of elements in the @pins array
33  *
34  * Creates a new jack object.
35  *
36  * Returns zero if successful, or a negative error code on failure.
37  * On success jack will be initialised.
38  */
39 int snd_soc_card_jack_new(struct snd_soc_card *card, const char *id, int type,
40         struct snd_soc_jack *jack, struct snd_soc_jack_pin *pins,
41         unsigned int num_pins)
42 {
43         int ret;
44
45         mutex_init(&jack->mutex);
46         jack->card = card;
47         INIT_LIST_HEAD(&jack->pins);
48         INIT_LIST_HEAD(&jack->jack_zones);
49         BLOCKING_INIT_NOTIFIER_HEAD(&jack->notifier);
50
51         ret = snd_jack_new(card->snd_card, id, type, &jack->jack);
52         if (ret)
53                 return ret;
54
55         if (num_pins)
56                 return snd_soc_jack_add_pins(jack, num_pins, pins);
57
58         return 0;
59 }
60 EXPORT_SYMBOL_GPL(snd_soc_card_jack_new);
61
62 /**
63  * snd_soc_jack_report - Report the current status for a jack
64  *
65  * @jack:   the jack
66  * @status: a bitmask of enum snd_jack_type values that are currently detected.
67  * @mask:   a bitmask of enum snd_jack_type values that being reported.
68  *
69  * If configured using snd_soc_jack_add_pins() then the associated
70  * DAPM pins will be enabled or disabled as appropriate and DAPM
71  * synchronised.
72  *
73  * Note: This function uses mutexes and should be called from a
74  * context which can sleep (such as a workqueue).
75  */
76 void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask)
77 {
78         struct snd_soc_dapm_context *dapm;
79         struct snd_soc_jack_pin *pin;
80         unsigned int sync = 0;
81         int enable;
82
83         trace_snd_soc_jack_report(jack, mask, status);
84
85         if (!jack)
86                 return;
87
88         dapm = &jack->card->dapm;
89
90         mutex_lock(&jack->mutex);
91
92         jack->status &= ~mask;
93         jack->status |= status & mask;
94
95         trace_snd_soc_jack_notify(jack, status);
96
97         list_for_each_entry(pin, &jack->pins, list) {
98                 enable = pin->mask & jack->status;
99
100                 if (pin->invert)
101                         enable = !enable;
102
103                 if (enable)
104                         snd_soc_dapm_enable_pin(dapm, pin->pin);
105                 else
106                         snd_soc_dapm_disable_pin(dapm, pin->pin);
107
108                 /* we need to sync for this case only */
109                 sync = 1;
110         }
111
112         /* Report before the DAPM sync to help users updating micbias status */
113         blocking_notifier_call_chain(&jack->notifier, jack->status, jack);
114
115         if (sync)
116                 snd_soc_dapm_sync(dapm);
117
118         snd_jack_report(jack->jack, jack->status);
119
120         mutex_unlock(&jack->mutex);
121 }
122 EXPORT_SYMBOL_GPL(snd_soc_jack_report);
123
124 /**
125  * snd_soc_jack_add_zones - Associate voltage zones with jack
126  *
127  * @jack:  ASoC jack
128  * @count: Number of zones
129  * @zones:  Array of zones
130  *
131  * After this function has been called the zones specified in the
132  * array will be associated with the jack.
133  */
134 int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
135                           struct snd_soc_jack_zone *zones)
136 {
137         int i;
138
139         for (i = 0; i < count; i++) {
140                 INIT_LIST_HEAD(&zones[i].list);
141                 list_add(&(zones[i].list), &jack->jack_zones);
142         }
143         return 0;
144 }
145 EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones);
146
147 /**
148  * snd_soc_jack_get_type - Based on the mic bias value, this function returns
149  * the type of jack from the zones declared in the jack type
150  *
151  * @jack:  ASoC jack
152  * @micbias_voltage:  mic bias voltage at adc channel when jack is plugged in
153  *
154  * Based on the mic bias value passed, this function helps identify
155  * the type of jack from the already declared jack zones
156  */
157 int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage)
158 {
159         struct snd_soc_jack_zone *zone;
160
161         list_for_each_entry(zone, &jack->jack_zones, list) {
162                 if (micbias_voltage >= zone->min_mv &&
163                         micbias_voltage < zone->max_mv)
164                                 return zone->jack_type;
165         }
166         return 0;
167 }
168 EXPORT_SYMBOL_GPL(snd_soc_jack_get_type);
169
170 /**
171  * snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack
172  *
173  * @jack:  ASoC jack
174  * @count: Number of pins
175  * @pins:  Array of pins
176  *
177  * After this function has been called the DAPM pins specified in the
178  * pins array will have their status updated to reflect the current
179  * state of the jack whenever the jack status is updated.
180  */
181 int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
182                           struct snd_soc_jack_pin *pins)
183 {
184         int i;
185
186         for (i = 0; i < count; i++) {
187                 if (!pins[i].pin) {
188                         dev_err(jack->card->dev, "ASoC: No name for pin %d\n",
189                                 i);
190                         return -EINVAL;
191                 }
192                 if (!pins[i].mask) {
193                         dev_err(jack->card->dev, "ASoC: No mask for pin %d"
194                                 " (%s)\n", i, pins[i].pin);
195                         return -EINVAL;
196                 }
197
198                 INIT_LIST_HEAD(&pins[i].list);
199                 list_add(&(pins[i].list), &jack->pins);
200         }
201
202         /* Update to reflect the last reported status; canned jack
203          * implementations are likely to set their state before the
204          * card has an opportunity to associate pins.
205          */
206         snd_soc_jack_report(jack, 0, 0);
207
208         return 0;
209 }
210 EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins);
211
212 /**
213  * snd_soc_jack_notifier_register - Register a notifier for jack status
214  *
215  * @jack:  ASoC jack
216  * @nb:    Notifier block to register
217  *
218  * Register for notification of the current status of the jack.  Note
219  * that it is not possible to report additional jack events in the
220  * callback from the notifier, this is intended to support
221  * applications such as enabling electrical detection only when a
222  * mechanical detection event has occurred.
223  */
224 void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
225                                     struct notifier_block *nb)
226 {
227         blocking_notifier_chain_register(&jack->notifier, nb);
228 }
229 EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_register);
230
231 /**
232  * snd_soc_jack_notifier_unregister - Unregister a notifier for jack status
233  *
234  * @jack:  ASoC jack
235  * @nb:    Notifier block to unregister
236  *
237  * Stop notifying for status changes.
238  */
239 void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
240                                       struct notifier_block *nb)
241 {
242         blocking_notifier_chain_unregister(&jack->notifier, nb);
243 }
244 EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_unregister);
245
246 #ifdef CONFIG_GPIOLIB
247 /* gpio detect */
248 static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio)
249 {
250         struct snd_soc_jack *jack = gpio->jack;
251         int enable;
252         int report;
253
254         enable = gpiod_get_value_cansleep(gpio->desc);
255         if (gpio->invert)
256                 enable = !enable;
257
258         if (enable)
259                 report = gpio->report;
260         else
261                 report = 0;
262
263         if (gpio->jack_status_check)
264                 report = gpio->jack_status_check(gpio->data);
265
266         snd_soc_jack_report(jack, report, gpio->report);
267 }
268
269 /* irq handler for gpio pin */
270 static irqreturn_t gpio_handler(int irq, void *data)
271 {
272         struct snd_soc_jack_gpio *gpio = data;
273         struct device *dev = gpio->jack->card->dev;
274
275         trace_snd_soc_jack_irq(gpio->name);
276
277         if (device_may_wakeup(dev))
278                 pm_wakeup_event(dev, gpio->debounce_time + 50);
279
280         queue_delayed_work(system_power_efficient_wq, &gpio->work,
281                               msecs_to_jiffies(gpio->debounce_time));
282
283         return IRQ_HANDLED;
284 }
285
286 /* gpio work */
287 static void gpio_work(struct work_struct *work)
288 {
289         struct snd_soc_jack_gpio *gpio;
290
291         gpio = container_of(work, struct snd_soc_jack_gpio, work.work);
292         snd_soc_jack_gpio_detect(gpio);
293 }
294
295 /**
296  * snd_soc_jack_add_gpios - Associate GPIO pins with an ASoC jack
297  *
298  * @jack:  ASoC jack
299  * @count: number of pins
300  * @gpios: array of gpio pins
301  *
302  * This function will request gpio, set data direction and request irq
303  * for each gpio in the array.
304  */
305 int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
306                         struct snd_soc_jack_gpio *gpios)
307 {
308         int i, ret;
309
310         for (i = 0; i < count; i++) {
311                 if (!gpios[i].name) {
312                         dev_err(jack->card->dev,
313                                 "ASoC: No name for gpio at index %d\n", i);
314                         ret = -EINVAL;
315                         goto undo;
316                 }
317
318                 if (gpios[i].gpiod_dev) {
319                         /* GPIO descriptor */
320                         gpios[i].desc = gpiod_get_index(gpios[i].gpiod_dev,
321                                                         gpios[i].name,
322                                                         gpios[i].idx, GPIOD_IN);
323                         if (IS_ERR(gpios[i].desc)) {
324                                 ret = PTR_ERR(gpios[i].desc);
325                                 dev_err(gpios[i].gpiod_dev,
326                                         "ASoC: Cannot get gpio at index %d: %d",
327                                         i, ret);
328                                 goto undo;
329                         }
330                 } else {
331                         /* legacy GPIO number */
332                         if (!gpio_is_valid(gpios[i].gpio)) {
333                                 dev_err(jack->card->dev,
334                                         "ASoC: Invalid gpio %d\n",
335                                         gpios[i].gpio);
336                                 ret = -EINVAL;
337                                 goto undo;
338                         }
339
340                         ret = gpio_request_one(gpios[i].gpio, GPIOF_IN,
341                                                gpios[i].name);
342                         if (ret)
343                                 goto undo;
344
345                         gpios[i].desc = gpio_to_desc(gpios[i].gpio);
346                 }
347
348                 INIT_DELAYED_WORK(&gpios[i].work, gpio_work);
349                 gpios[i].jack = jack;
350
351                 ret = request_any_context_irq(gpiod_to_irq(gpios[i].desc),
352                                               gpio_handler,
353                                               IRQF_TRIGGER_RISING |
354                                               IRQF_TRIGGER_FALLING,
355                                               gpios[i].name,
356                                               &gpios[i]);
357                 if (ret < 0)
358                         goto err;
359
360                 if (gpios[i].wake) {
361                         ret = irq_set_irq_wake(gpiod_to_irq(gpios[i].desc), 1);
362                         if (ret != 0)
363                                 dev_err(jack->card->dev,
364                                         "ASoC: Failed to mark GPIO at index %d as wake source: %d\n",
365                                         i, ret);
366                 }
367
368                 /* Expose GPIO value over sysfs for diagnostic purposes */
369                 gpiod_export(gpios[i].desc, false);
370
371                 /* Update initial jack status */
372                 schedule_delayed_work(&gpios[i].work,
373                                       msecs_to_jiffies(gpios[i].debounce_time));
374         }
375
376         return 0;
377
378 err:
379         gpio_free(gpios[i].gpio);
380 undo:
381         snd_soc_jack_free_gpios(jack, i, gpios);
382
383         return ret;
384 }
385 EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios);
386
387 /**
388  * snd_soc_jack_add_gpiods - Associate GPIO descriptor pins with an ASoC jack
389  *
390  * @gpiod_dev: GPIO consumer device
391  * @jack:      ASoC jack
392  * @count:     number of pins
393  * @gpios:     array of gpio pins
394  *
395  * This function will request gpio, set data direction and request irq
396  * for each gpio in the array.
397  */
398 int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
399                             struct snd_soc_jack *jack,
400                             int count, struct snd_soc_jack_gpio *gpios)
401 {
402         int i;
403
404         for (i = 0; i < count; i++)
405                 gpios[i].gpiod_dev = gpiod_dev;
406
407         return snd_soc_jack_add_gpios(jack, count, gpios);
408 }
409 EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpiods);
410
411 /**
412  * snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack
413  *
414  * @jack:  ASoC jack
415  * @count: number of pins
416  * @gpios: array of gpio pins
417  *
418  * Release gpio and irq resources for gpio pins associated with an ASoC jack.
419  */
420 void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
421                         struct snd_soc_jack_gpio *gpios)
422 {
423         int i;
424
425         for (i = 0; i < count; i++) {
426                 gpiod_unexport(gpios[i].desc);
427                 free_irq(gpiod_to_irq(gpios[i].desc), &gpios[i]);
428                 cancel_delayed_work_sync(&gpios[i].work);
429                 gpiod_put(gpios[i].desc);
430                 gpios[i].jack = NULL;
431         }
432 }
433 EXPORT_SYMBOL_GPL(snd_soc_jack_free_gpios);
434 #endif  /* CONFIG_GPIOLIB */