These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / sound / soc / samsung / smartq_wm8987.c
1 /* sound/soc/samsung/smartq_wm8987.c
2  *
3  * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
4  *
5  * Based on smdk6410_wm8987.c
6  *     Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
7  *     Graeme Gregory - graeme.gregory@wolfsonmicro.com
8  *
9  *  This program is free software; you can redistribute  it and/or modify it
10  *  under  the terms of  the GNU General  Public License as published by the
11  *  Free Software Foundation;  either version 2 of the  License, or (at your
12  *  option) any later version.
13  *
14  */
15
16 #include <linux/gpio.h>
17 #include <linux/module.h>
18
19 #include <sound/soc.h>
20 #include <sound/jack.h>
21
22 #include <mach/gpio-samsung.h>
23 #include <asm/mach-types.h>
24
25 #include "i2s.h"
26 #include "../codecs/wm8750.h"
27
28 /*
29  * WM8987 is register compatible with WM8750, so using that as base driver.
30  */
31
32 static struct snd_soc_card snd_soc_smartq;
33
34 static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
35         struct snd_pcm_hw_params *params)
36 {
37         struct snd_soc_pcm_runtime *rtd = substream->private_data;
38         struct snd_soc_dai *codec_dai = rtd->codec_dai;
39         struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
40         unsigned int clk = 0;
41         int ret;
42
43         switch (params_rate(params)) {
44         case 8000:
45         case 16000:
46         case 32000:
47         case 48000:
48         case 96000:
49                 clk = 12288000;
50                 break;
51         case 11025:
52         case 22050:
53         case 44100:
54         case 88200:
55                 clk = 11289600;
56                 break;
57         }
58
59         /* Use PCLK for I2S signal generation */
60         ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
61                                         0, SND_SOC_CLOCK_IN);
62         if (ret < 0)
63                 return ret;
64
65         /* Gate the RCLK output on PAD */
66         ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
67                                         0, SND_SOC_CLOCK_IN);
68         if (ret < 0)
69                 return ret;
70
71         /* set the codec system clock for DAC and ADC */
72         ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
73                                      SND_SOC_CLOCK_IN);
74         if (ret < 0)
75                 return ret;
76
77         return 0;
78 }
79
80 /*
81  * SmartQ WM8987 HiFi DAI operations.
82  */
83 static struct snd_soc_ops smartq_hifi_ops = {
84         .hw_params = smartq_hifi_hw_params,
85 };
86
87 static struct snd_soc_jack smartq_jack;
88
89 static struct snd_soc_jack_pin smartq_jack_pins[] = {
90         /* Disable speaker when headphone is plugged in */
91         {
92                 .pin    = "Internal Speaker",
93                 .mask   = SND_JACK_HEADPHONE,
94         },
95 };
96
97 static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
98         {
99                 .gpio           = S3C64XX_GPL(12),
100                 .name           = "headphone detect",
101                 .report         = SND_JACK_HEADPHONE,
102                 .debounce_time  = 200,
103         },
104 };
105
106 static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
107         SOC_DAPM_PIN_SWITCH("Internal Speaker"),
108         SOC_DAPM_PIN_SWITCH("Headphone Jack"),
109         SOC_DAPM_PIN_SWITCH("Internal Mic"),
110 };
111
112 static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
113                                 struct snd_kcontrol *k,
114                                 int event)
115 {
116         gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
117
118         return 0;
119 }
120
121 static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
122         SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
123         SND_SOC_DAPM_HP("Headphone Jack", NULL),
124         SND_SOC_DAPM_MIC("Internal Mic", NULL),
125 };
126
127 static const struct snd_soc_dapm_route audio_map[] = {
128         {"Headphone Jack", NULL, "LOUT2"},
129         {"Headphone Jack", NULL, "ROUT2"},
130
131         {"Internal Speaker", NULL, "LOUT2"},
132         {"Internal Speaker", NULL, "ROUT2"},
133
134         {"Mic Bias", NULL, "Internal Mic"},
135         {"LINPUT2", NULL, "Mic Bias"},
136 };
137
138 static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
139 {
140         struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
141         int err = 0;
142
143         /* set endpoints to not connected */
144         snd_soc_dapm_nc_pin(dapm, "LINPUT1");
145         snd_soc_dapm_nc_pin(dapm, "RINPUT1");
146         snd_soc_dapm_nc_pin(dapm, "OUT3");
147         snd_soc_dapm_nc_pin(dapm, "ROUT1");
148
149         /* Headphone jack detection */
150         err = snd_soc_card_jack_new(rtd->card, "Headphone Jack",
151                                     SND_JACK_HEADPHONE, &smartq_jack,
152                                     smartq_jack_pins,
153                                     ARRAY_SIZE(smartq_jack_pins));
154         if (err)
155                 return err;
156
157         err = snd_soc_jack_add_gpios(&smartq_jack,
158                                      ARRAY_SIZE(smartq_jack_gpios),
159                                      smartq_jack_gpios);
160
161         return err;
162 }
163
164 static int smartq_wm8987_card_remove(struct snd_soc_card *card)
165 {
166         snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
167                                 smartq_jack_gpios);
168
169         return 0;
170 }
171
172 static struct snd_soc_dai_link smartq_dai[] = {
173         {
174                 .name           = "wm8987",
175                 .stream_name    = "SmartQ Hi-Fi",
176                 .cpu_dai_name   = "samsung-i2s.0",
177                 .codec_dai_name = "wm8750-hifi",
178                 .platform_name  = "samsung-i2s.0",
179                 .codec_name     = "wm8750.0-0x1a",
180                 .init           = smartq_wm8987_init,
181                 .dai_fmt        = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
182                                   SND_SOC_DAIFMT_CBS_CFS,
183                 .ops            = &smartq_hifi_ops,
184         },
185 };
186
187 static struct snd_soc_card snd_soc_smartq = {
188         .name = "SmartQ",
189         .owner = THIS_MODULE,
190         .remove = smartq_wm8987_card_remove,
191         .dai_link = smartq_dai,
192         .num_links = ARRAY_SIZE(smartq_dai),
193
194         .dapm_widgets = wm8987_dapm_widgets,
195         .num_dapm_widgets = ARRAY_SIZE(wm8987_dapm_widgets),
196         .dapm_routes = audio_map,
197         .num_dapm_routes = ARRAY_SIZE(audio_map),
198         .controls = wm8987_smartq_controls,
199         .num_controls = ARRAY_SIZE(wm8987_smartq_controls),
200 };
201
202 static struct platform_device *smartq_snd_device;
203
204 static int __init smartq_init(void)
205 {
206         int ret;
207
208         if (!machine_is_smartq7() && !machine_is_smartq5()) {
209                 pr_info("Only SmartQ is supported by this ASoC driver\n");
210                 return -ENODEV;
211         }
212
213         smartq_snd_device = platform_device_alloc("soc-audio", -1);
214         if (!smartq_snd_device)
215                 return -ENOMEM;
216
217         platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
218
219         ret = platform_device_add(smartq_snd_device);
220         if (ret) {
221                 platform_device_put(smartq_snd_device);
222                 return ret;
223         }
224
225         /* Initialise GPIOs used by amplifiers */
226         ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
227         if (ret) {
228                 dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
229                 goto err_unregister_device;
230         }
231
232         /* Disable amplifiers */
233         ret = gpio_direction_output(S3C64XX_GPK(12), 1);
234         if (ret) {
235                 dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
236                 goto err_free_gpio_amp_shut;
237         }
238
239         return 0;
240
241 err_free_gpio_amp_shut:
242         gpio_free(S3C64XX_GPK(12));
243 err_unregister_device:
244         platform_device_unregister(smartq_snd_device);
245
246         return ret;
247 }
248
249 static void __exit smartq_exit(void)
250 {
251         gpio_free(S3C64XX_GPK(12));
252
253         platform_device_unregister(smartq_snd_device);
254 }
255
256 module_init(smartq_init);
257 module_exit(smartq_exit);
258
259 /* Module information */
260 MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
261 MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
262 MODULE_LICENSE("GPL");