Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / sound / pci / cs5535audio / cs5535audio_pm.c
1 /*
2  * Power management for audio on multifunction CS5535 companion device
3  * Copyright (C) Jaya Kumar
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
18  *
19  */
20
21 #include <linux/init.h>
22 #include <linux/pci.h>
23 #include <linux/delay.h>
24 #include <sound/core.h>
25 #include <sound/control.h>
26 #include <sound/initval.h>
27 #include <sound/asoundef.h>
28 #include <sound/pcm.h>
29 #include <sound/ac97_codec.h>
30 #include "cs5535audio.h"
31
32 static void snd_cs5535audio_stop_hardware(struct cs5535audio *cs5535au)
33 {
34         /* 
35         we depend on snd_ac97_suspend to tell the
36         AC97 codec to shutdown. the amd spec suggests
37         that the LNK_SHUTDOWN be done at the same time
38         that the codec power-down is issued. instead,
39         we do it just after rather than at the same 
40         time. excluding codec specific build_ops->suspend
41         ac97 powerdown hits:
42         0x8000 EAPD 
43         0x4000 Headphone amplifier 
44         0x0300 ADC & DAC 
45         0x0400 Analog Mixer powerdown (Vref on) 
46         I am not sure if this is the best that we can do.
47         The remainder to be investigated are:
48         - analog mixer (vref off) 0x0800
49         - AC-link powerdown 0x1000
50         - codec internal clock 0x2000
51         */
52
53         /* set LNK_SHUTDOWN to shutdown AC link */
54         cs_writel(cs5535au, ACC_CODEC_CNTL, ACC_CODEC_CNTL_LNK_SHUTDOWN);
55
56 }
57
58 static int snd_cs5535audio_suspend(struct device *dev)
59 {
60         struct snd_card *card = dev_get_drvdata(dev);
61         struct cs5535audio *cs5535au = card->private_data;
62         int i;
63
64         snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
65         snd_pcm_suspend_all(cs5535au->pcm);
66         snd_ac97_suspend(cs5535au->ac97);
67         for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
68                 struct cs5535audio_dma *dma = &cs5535au->dmas[i];
69                 if (dma && dma->substream)
70                         dma->saved_prd = dma->ops->read_prd(cs5535au);
71         }
72         /* save important regs, then disable aclink in hw */
73         snd_cs5535audio_stop_hardware(cs5535au);
74         return 0;
75 }
76
77 static int snd_cs5535audio_resume(struct device *dev)
78 {
79         struct snd_card *card = dev_get_drvdata(dev);
80         struct cs5535audio *cs5535au = card->private_data;
81         u32 tmp;
82         int timeout;
83         int i;
84
85         /* set LNK_WRM_RST to reset AC link */
86         cs_writel(cs5535au, ACC_CODEC_CNTL, ACC_CODEC_CNTL_LNK_WRM_RST);
87
88         timeout = 50;
89         do {
90                 tmp = cs_readl(cs5535au, ACC_CODEC_STATUS);
91                 if (tmp & PRM_RDY_STS)
92                         break;
93                 udelay(1);
94         } while (--timeout);
95
96         if (!timeout)
97                 dev_err(cs5535au->card->dev, "Failure getting AC Link ready\n");
98
99         /* set up rate regs, dma. actual initiation is done in trig */
100         for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
101                 struct cs5535audio_dma *dma = &cs5535au->dmas[i];
102                 if (dma && dma->substream) {
103                         dma->substream->ops->prepare(dma->substream);
104                         dma->ops->setup_prd(cs5535au, dma->saved_prd);
105                 }
106         }
107
108         /* we depend on ac97 to perform the codec power up */
109         snd_ac97_resume(cs5535au->ac97);
110         snd_power_change_state(card, SNDRV_CTL_POWER_D0);
111
112         return 0;
113 }
114
115 SIMPLE_DEV_PM_OPS(snd_cs5535audio_pm, snd_cs5535audio_suspend, snd_cs5535audio_resume);