Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / sound / oss / dmasound / dmasound_core.c

/*
 *  linux/sound/oss/dmasound/dmasound_core.c
 *
 *
 *  OSS/Free compatible Atari TT/Falcon and Amiga DMA sound driver for
 *  Linux/m68k
 *  Extended to support Power Macintosh for Linux/ppc by Paul Mackerras
 *
 *  (c) 1995 by Michael Schlueter & Michael Marte
 *
 *  Michael Schlueter (michael@duck.syd.de) did the basic structure of the VFS
 *  interface and the u-law to signed byte conversion.
 *
 *  Michael Marte (marte@informatik.uni-muenchen.de) did the sound queue,
 *  /dev/mixer, /dev/sndstat and complemented the VFS interface. He would like
 *  to thank:
 *    - Michael Schlueter for initial ideas and documentation on the MFP and
 *      the DMA sound hardware.
 *    - Therapy? for their CD 'Troublegum' which really made me rock.
 *
 *  /dev/sndstat is based on code by Hannu Savolainen, the author of the
 *  VoxWare family of drivers.
 *
 *  This file is subject to the terms and conditions of the GNU General Public
 *  License.  See the file COPYING in the main directory of this archive
 *  for more details.
 *
 *  History:
 *
 *      1995/8/25       First release
 *
 *      1995/9/02       Roman Hodek:
 *                        - Fixed atari_stram_alloc() call, the timer
 *                          programming and several race conditions
 *      1995/9/14       Roman Hodek:
 *                        - After some discussion with Michael Schlueter,
 *                          revised the interrupt disabling
 *                        - Slightly speeded up U8->S8 translation by using
 *                          long operations where possible
 *                        - Added 4:3 interpolation for /dev/audio
 *
 *      1995/9/20       Torsten Scherer:
 *                        - Fixed a bug in sq_write and changed /dev/audio
 *                          converting to play at 12517Hz instead of 6258Hz.
 *
 *      1995/9/23       Torsten Scherer:
 *                        - Changed sq_interrupt() and sq_play() to pre-program
 *                          the DMA for another frame while there's still one
 *                          running. This allows the IRQ response to be
 *                          arbitrarily delayed and playing will still continue.
 *
 *      1995/10/14      Guenther Kelleter, Torsten Scherer:
 *                        - Better support for Falcon audio (the Falcon doesn't
 *                          raise an IRQ at the end of a frame, but at the
 *                          beginning instead!). uses 'if (codec_dma)' in lots
 *                          of places to simply switch between Falcon and TT
 *                          code.
 *
 *      1995/11/06      Torsten Scherer:
 *                        - Started introducing a hardware abstraction scheme
 *                          (may perhaps also serve for Amigas?)
 *                        - Can now play samples at almost all frequencies by
 *                          means of a more generalized expand routine
 *                        - Takes a good deal of care to cut data only at
 *                          sample sizes
 *                        - Buffer size is now a kernel runtime option
 *                        - Implemented fsync() & several minor improvements
 *                      Guenther Kelleter:
 *                        - Useful hints and bug fixes
 *                        - Cross-checked it for Falcons
 *
 *      1996/3/9        Geert Uytterhoeven:
 *                        - Support added for Amiga, A-law, 16-bit little
 *                          endian.
 *                        - Unification to drivers/sound/dmasound.c.
 *
 *      1996/4/6        Martin Mitchell:
 *                        - Updated to 1.3 kernel.
 *
 *      1996/6/13       Topi Kanerva:
 *                        - Fixed things that were broken (mainly the amiga
 *                          14-bit routines)
 *                        - /dev/sndstat shows now the real hardware frequency
 *                        - The lowpass filter is disabled by default now
 *
 *      1996/9/25       Geert Uytterhoeven:
 *                        - Modularization
 *
 *      1998/6/10       Andreas Schwab:
 *                        - Converted to use sound_core
 *
 *      1999/12/28      Richard Zidlicky:
 *                        - Added support for Q40
 *
 *      2000/2/27       Geert Uytterhoeven:
 *                        - Clean up and split the code into 4 parts:
 *                            o dmasound_core: machine-independent code
 *                            o dmasound_atari: Atari TT and Falcon support
 *                            o dmasound_awacs: Apple PowerMac support
 *                            o dmasound_paula: Amiga support
 *
 *      2000/3/25       Geert Uytterhoeven:
 *                        - Integration of dmasound_q40
 *                        - Small clean ups
 *
 *      2001/01/26 [1.0] Iain Sandoe
 *                        - make /dev/sndstat show revision & edition info.
 *                        - since dmasound.mach.sq_setup() can fail on pmac
 *                          its type has been changed to int and the returns
 *                          are checked.
 *                 [1.1]  - stop missing translations from being called.
 *      2001/02/08 [1.2]  - remove unused translation tables & move machine-
 *                          specific tables to low-level.
 *                        - return correct info. for SNDCTL_DSP_GETFMTS.
 *                 [1.3]  - implement SNDCTL_DSP_GETCAPS fully.
 *                 [1.4]  - make /dev/sndstat text length usage deterministic.
 *                        - make /dev/sndstat call to low-level
 *                          dmasound.mach.state_info() pass max space to ll driver.
 *                        - tidy startup banners and output info.
 *                 [1.5]  - tidy up a little (removed some unused #defines in
 *                          dmasound.h)
 *                        - fix up HAS_RECORD conditionalisation.
 *                        - add record code in places it is missing...
 *                        - change buf-sizes to bytes to allow < 1kb for pmac
 *                          if user param entry is < 256 the value is taken to
 *                          be in kb > 256 is taken to be in bytes.
 *                        - make default buff/frag params conditional on
 *                          machine to allow smaller values for pmac.
 *                        - made the ioctls, read & write comply with the OSS
 *                          rules on setting params.
 *                        - added parsing of _setup() params for record.
 *      2001/04/04 [1.6]  - fix bug where sample rates higher than maximum were
 *                          being reported as OK.
 *                        - fix open() to return -EBUSY as per OSS doc. when
 *                          audio is in use - this is independent of O_NOBLOCK.
 *                        - fix bug where SNDCTL_DSP_POST was blocking.
 */

 /* Record capability notes 30/01/2001:
  * At present these observations apply only to pmac LL driver (the only one
  * that can do record, at present).  However, if other LL drivers for machines
  * with record are added they may apply.
  *
  * The fragment parameters for the record and play channels are separate.
  * However, if the driver is opened O_RDWR there is no way (in the current OSS
  * API) to specify their values independently for the record and playback
  * channels.  Since the only common factor between the input & output is the
  * sample rate (on pmac) it should be possible to open /dev/dspX O_WRONLY and
  * /dev/dspY O_RDONLY.  The input & output channels could then have different
  * characteristics (other than the first that sets sample rate claiming the
  * right to set it for ever).  As it stands, the format, channels, number of
  * bits & sample rate are assumed to be common.  In the future perhaps these
  * should be the responsibility of the LL driver - and then if a card really
  * does not share items between record & playback they can be specified
  * separately.
*/

/* Thread-safeness of shared_resources notes: 31/01/2001
 * If the user opens O_RDWR and then splits record & play between two threads
 * both of which inherit the fd - and then starts changing things from both
 * - we will have difficulty telling.
 *
 * It's bad application coding - but ...
 * TODO: think about how to sort this out... without bogging everything down in
 * semaphores.
 *
 * Similarly, the OSS spec says "all changes to parameters must be between
 * open() and the first read() or write(). - and a bit later on (by
 * implication) "between SNDCTL_DSP_RESET and the first read() or write() after
 * it".  If the app is multi-threaded and this rule is broken between threads
 * we will have trouble spotting it - and the fault will be rather obscure :-(
 *
 * We will try and put out at least a kmsg if we see it happen... but I think
 * it will be quite hard to trap it with an -EXXX return... because we can't
 * see the fault until after the damage is done.
*/

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/sound.h>
#include <linux/init.h>
#include <linux/soundcard.h>
#include <linux/poll.h>
#include <linux/mutex.h>

#include <asm/uaccess.h>

#include "dmasound.h"

#define DMASOUND_CORE_REVISION 1
#define DMASOUND_CORE_EDITION 6

    /*
     *  Declarations
     */

static DEFINE_MUTEX(dmasound_core_mutex);
int dmasound_catchRadius = 0;
module_param(dmasound_catchRadius, int, 0);

static unsigned int numWriteBufs = DEFAULT_N_BUFFERS;
module_param(numWriteBufs, int, 0);
static unsigned int writeBufSize = DEFAULT_BUFF_SIZE ;  /* in bytes */
module_param(writeBufSize, int, 0);

MODULE_LICENSE("GPL");

#ifdef MODULE
static int sq_unit = -1;
static int mixer_unit = -1;
static int state_unit = -1;
static int irq_installed;
#endif /* MODULE */

/* control over who can modify resources shared between play/record */
static fmode_t shared_resource_owner;
static int shared_resources_initialised;

    /*
     *  Mid level stuff
     */

struct sound_settings dmasound = {
        .lock = __SPIN_LOCK_UNLOCKED(dmasound.lock)
};

static inline void sound_silence(void)
{
        dmasound.mach.silence(); /* _MUST_ stop DMA */
}

static inline int sound_set_format(int format)
{
        return dmasound.mach.setFormat(format);
}


static int sound_set_speed(int speed)
{
        if (speed < 0)
                return dmasound.soft.speed;

        /* trap out-of-range speed settings.
           at present we allow (arbitrarily) low rates - using soft
           up-conversion - but we can't allow > max because there is
           no soft down-conversion.
        */
        if (dmasound.mach.max_dsp_speed &&
           (speed > dmasound.mach.max_dsp_speed))
                speed = dmasound.mach.max_dsp_speed ;

        dmasound.soft.speed = speed;

        if (dmasound.minDev == SND_DEV_DSP)
                dmasound.dsp.speed = dmasound.soft.speed;

        return dmasound.soft.speed;
}

static int sound_set_stereo(int stereo)
{
        if (stereo < 0)
                return dmasound.soft.stereo;

        stereo = !!stereo;    /* should be 0 or 1 now */

        dmasound.soft.stereo = stereo;
        if (dmasound.minDev == SND_DEV_DSP)
                dmasound.dsp.stereo = stereo;

        return stereo;
}

static ssize_t sound_copy_translate(TRANS *trans, const u_char __user *userPtr,
                                    size_t userCount, u_char frame[],
                                    ssize_t *frameUsed, ssize_t frameLeft)
{
        ssize_t (*ct_func)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);

        switch (dmasound.soft.format) {
            case AFMT_MU_LAW:
                ct_func = trans->ct_ulaw;
                break;
            case AFMT_A_LAW:
                ct_func = trans->ct_alaw;
                break;
            case AFMT_S8:
                ct_func = trans->ct_s8;
                break;
            case AFMT_U8:
                ct_func = trans->ct_u8;
                break;
            case AFMT_S16_BE:
                ct_func = trans->ct_s16be;
                break;
            case AFMT_U16_BE:
                ct_func = trans->ct_u16be;
                break;
            case AFMT_S16_LE:
                ct_func = trans->ct_s16le;
                break;
            case AFMT_U16_LE:
                ct_func = trans->ct_u16le;
                break;
            default:
                return 0;
        }
        /* if the user has requested a non-existent translation don't try
           to call it but just return 0 bytes moved
        */
        if (ct_func)
                return ct_func(userPtr, userCount, frame, frameUsed, frameLeft);
        return 0;
}

    /*
     *  /dev/mixer abstraction
     */

static struct {
    int busy;
    int modify_counter;
} mixer;

static int mixer_open(struct inode *inode, struct file *file)
{
        mutex_lock(&dmasound_core_mutex);
        if (!try_module_get(dmasound.mach.owner)) {
                mutex_unlock(&dmasound_core_mutex);
                return -ENODEV;
        }
        mixer.busy = 1;
        mutex_unlock(&dmasound_core_mutex);
        return 0;
}

static int mixer_release(struct inode *inode, struct file *file)
{
        mutex_lock(&dmasound_core_mutex);
        mixer.busy = 0;
        module_put(dmasound.mach.owner);
        mutex_unlock(&dmasound_core_mutex);
        return 0;
}

static int mixer_ioctl(struct file *file, u_int cmd, u_long arg)
{
        if (_SIOC_DIR(cmd) & _SIOC_WRITE)
            mixer.modify_counter++;
        switch (cmd) {
            case OSS_GETVERSION:
                return IOCTL_OUT(arg, SOUND_VERSION);
            case SOUND_MIXER_INFO:
                {
                    mixer_info info;
                    memset(&info, 0, sizeof(info));
                    strlcpy(info.id, dmasound.mach.name2, sizeof(info.id));
                    strlcpy(info.name, dmasound.mach.name2, sizeof(info.name));
                    info.modify_counter = mixer.modify_counter;
                    if (copy_to_user((void __user *)arg, &info, sizeof(info)))
                            return -EFAULT;
                    return 0;
                }
        }
        if (dmasound.mach.mixer_ioctl)
            return dmasound.mach.mixer_ioctl(cmd, arg);
        return -EINVAL;
}

static long mixer_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
{
        int ret;

        mutex_lock(&dmasound_core_mutex);
        ret = mixer_ioctl(file, cmd, arg);
        mutex_unlock(&dmasound_core_mutex);

        return ret;
}

static const struct file_operations mixer_fops =
{
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
        .unlocked_ioctl = mixer_unlocked_ioctl,
        .open           = mixer_open,
        .release        = mixer_release,
};

static void mixer_init(void)
{
#ifndef MODULE
        int mixer_unit;
#endif
        mixer_unit = register_sound_mixer(&mixer_fops, -1);
        if (mixer_unit < 0)
                return;

        mixer.busy = 0;
        dmasound.treble = 0;
        dmasound.bass = 0;
        if (dmasound.mach.mixer_init)
            dmasound.mach.mixer_init();
}


    /*
     *  Sound queue stuff, the heart of the driver
     */

struct sound_queue dmasound_write_sq;
static void sq_reset_output(void) ;

static int sq_allocate_buffers(struct sound_queue *sq, int num, int size)
{
        int i;

        if (sq->buffers)
                return 0;
        sq->numBufs = num;
        sq->bufSize = size;
        sq->buffers = kmalloc (num * sizeof(char *), GFP_KERNEL);
        if (!sq->buffers)
                return -ENOMEM;
        for (i = 0; i < num; i++) {
                sq->buffers[i] = dmasound.mach.dma_alloc(size, GFP_KERNEL);
                if (!sq->buffers[i]) {
                        while (i--)
                                dmasound.mach.dma_free(sq->buffers[i], size);
                        kfree(sq->buffers);
                        sq->buffers = NULL;
                        return -ENOMEM;
                }
        }
        return 0;
}

static void sq_release_buffers(struct sound_queue *sq)
{
        int i;

        if (sq->buffers) {
                for (i = 0; i < sq->numBufs; i++)
                        dmasound.mach.dma_free(sq->buffers[i], sq->bufSize);
                kfree(sq->buffers);
                sq->buffers = NULL;
        }
}


static int sq_setup(struct sound_queue *sq)
{
        int (*setup_func)(void) = NULL;
        int hard_frame ;

        if (sq->locked) { /* are we already set? - and not changeable */
#ifdef DEBUG_DMASOUND
printk("dmasound_core: tried to sq_setup a locked queue\n") ;
#endif
                return -EINVAL ;
        }
        sq->locked = 1 ; /* don't think we have a race prob. here _check_ */

        /* make sure that the parameters are set up
           This should have been done already...
        */

        dmasound.mach.init();

        /* OK.  If the user has set fragment parameters explicitly, then we
           should leave them alone... as long as they are valid.
           Invalid user fragment params can occur if we allow the whole buffer
           to be used when the user requests the fragments sizes (with no soft
           x-lation) and then the user subsequently sets a soft x-lation that
           requires increased internal buffering.

           Othwerwise (if the user did not set them) OSS says that we should
           select frag params on the basis of 0.5 s output & 0.1 s input
           latency. (TODO.  For now we will copy in the defaults.)
        */

        if (sq->user_frags <= 0) {
                sq->max_count = sq->numBufs ;
                sq->max_active = sq->numBufs ;
                sq->block_size = sq->bufSize;
                /* set up the user info */
                sq->user_frags = sq->numBufs ;
                sq->user_frag_size = sq->bufSize ;
                sq->user_frag_size *=
                        (dmasound.soft.size * (dmasound.soft.stereo+1) ) ;
                sq->user_frag_size /=
                        (dmasound.hard.size * (dmasound.hard.stereo+1) ) ;
        } else {
                /* work out requested block size */
                sq->block_size = sq->user_frag_size ;
                sq->block_size *=
                        (dmasound.hard.size * (dmasound.hard.stereo+1) ) ;
                sq->block_size /=
                        (dmasound.soft.size * (dmasound.soft.stereo+1) ) ;
                /* the user wants to write frag-size chunks */
                sq->block_size *= dmasound.hard.speed ;
                sq->block_size /= dmasound.soft.speed ;
                /* this only works for size values which are powers of 2 */
                hard_frame =
                        (dmasound.hard.size * (dmasound.hard.stereo+1))/8 ;
                sq->block_size +=  (hard_frame - 1) ;
                sq->block_size &= ~(hard_frame - 1) ; /* make sure we are aligned */
                /* let's just check for obvious mistakes */
                if ( sq->block_size <= 0 || sq->block_size > sq->bufSize) {
#ifdef DEBUG_DMASOUND
printk("dmasound_core: invalid frag size (user set %d)\n", sq->user_frag_size) ;
#endif
                        sq->block_size = sq->bufSize ;
                }
                if ( sq->user_frags <= sq->numBufs ) {
                        sq->max_count = sq->user_frags ;
                        /* if user has set max_active - then use it */
                        sq->max_active = (sq->max_active <= sq->max_count) ?
                                sq->max_active : sq->max_count ;
                } else {
#ifdef DEBUG_DMASOUND
printk("dmasound_core: invalid frag count (user set %d)\n", sq->user_frags) ;
#endif
                        sq->max_count =
                        sq->max_active = sq->numBufs ;
                }
        }
        sq->front = sq->count = sq->rear_size = 0;
        sq->syncing = 0;
        sq->active = 0;

        if (sq == &write_sq) {
            sq->rear = -1;
            setup_func = dmasound.mach.write_sq_setup;
        }
        if (setup_func)
            return setup_func();
        return 0 ;
}

static inline void sq_play(void)
{
        dmasound.mach.play();
}

static ssize_t sq_write(struct file *file, const char __user *src, size_t uLeft,
                        loff_t *ppos)
{
        ssize_t uWritten = 0;
        u_char *dest;
        ssize_t uUsed = 0, bUsed, bLeft;
        unsigned long flags ;

        /* ++TeSche: Is something like this necessary?
         * Hey, that's an honest question! Or does any other part of the
         * filesystem already checks this situation? I really don't know.
         */
        if (uLeft == 0)
                return 0;

        /* implement any changes we have made to the soft/hard params.
           this is not satisfactory really, all we have done up to now is to
           say what we would like - there hasn't been any real checking of capability
        */

        if (shared_resources_initialised == 0) {
                dmasound.mach.init() ;
                shared_resources_initialised = 1 ;
        }

        /* set up the sq if it is not already done. This may seem a dumb place
           to do it - but it is what OSS requires.  It means that write() can
           return memory allocation errors.  To avoid this possibility use the
           GETBLKSIZE or GETOSPACE ioctls (after you've fiddled with all the
           params you want to change) - these ioctls also force the setup.
        */

        if (write_sq.locked == 0) {
                if ((uWritten = sq_setup(&write_sq)) < 0) return uWritten ;
                uWritten = 0 ;
        }

/* FIXME: I think that this may be the wrong behaviour when we get strapped
        for time and the cpu is close to being (or actually) behind in sending data.
        - because we've lost the time that the N samples, already in the buffer,
        would have given us to get here with the next lot from the user.
*/
        /* The interrupt doesn't start to play the last, incomplete frame.
         * Thus we can append to it without disabling the interrupts! (Note
         * also that write_sq.rear isn't affected by the interrupt.)
         */

        /* as of 1.6 this behaviour changes if SNDCTL_DSP_POST has been issued:
           this will mimic the behaviour of syncing and allow the sq_play() to
           queue a partial fragment.  Since sq_play() may/will be called from
           the IRQ handler - at least on Pmac we have to deal with it.
           The strategy - possibly not optimum - is to kill _POST status if we
           get here.  This seems, at least, reasonable - in the sense that POST
           is supposed to indicate that we might not write before the queue
           is drained - and if we get here in time then it does not apply.
        */

        spin_lock_irqsave(&dmasound.lock, flags);
        write_sq.syncing &= ~2 ; /* take out POST status */
        spin_unlock_irqrestore(&dmasound.lock, flags);

        if (write_sq.count > 0 &&
            (bLeft = write_sq.block_size-write_sq.rear_size) > 0) {
                dest = write_sq.buffers[write_sq.rear];
                bUsed = write_sq.rear_size;
                uUsed = sound_copy_translate(dmasound.trans_write, src, uLeft,
                                             dest, &bUsed, bLeft);
                if (uUsed <= 0)
                        return uUsed;
                src += uUsed;
                uWritten += uUsed;
                uLeft = (uUsed <= uLeft) ? (uLeft - uUsed) : 0 ; /* paranoia */
                write_sq.rear_size = bUsed;
        }

        while (uLeft) {
                DEFINE_WAIT(wait);

                while (write_sq.count >= write_sq.max_active) {
                        prepare_to_wait(&write_sq.action_queue, &wait, TASK_INTERRUPTIBLE);
                        sq_play();
                        if (write_sq.non_blocking) {
                                finish_wait(&write_sq.action_queue, &wait);
                                return uWritten > 0 ? uWritten : -EAGAIN;
                        }
                        if (write_sq.count < write_sq.max_active)
                                break;

                        schedule_timeout(HZ);
                        if (signal_pending(current)) {
                                finish_wait(&write_sq.action_queue, &wait);
                                return uWritten > 0 ? uWritten : -EINTR;
                        }
                }

                finish_wait(&write_sq.action_queue, &wait);

                /* Here, we can avoid disabling the interrupt by first
                 * copying and translating the data, and then updating
                 * the write_sq variables. Until this is done, the interrupt
                 * won't see the new frame and we can work on it
                 * undisturbed.
                 */

                dest = write_sq.buffers[(write_sq.rear+1) % write_sq.max_count];
                bUsed = 0;
                bLeft = write_sq.block_size;
                uUsed = sound_copy_translate(dmasound.trans_write, src, uLeft,
                                             dest, &bUsed, bLeft);
                if (uUsed <= 0)
                        break;
                src += uUsed;
                uWritten += uUsed;
                uLeft = (uUsed <= uLeft) ? (uLeft - uUsed) : 0 ; /* paranoia */
                if (bUsed) {
                        write_sq.rear = (write_sq.rear+1) % write_sq.max_count;
                        write_sq.rear_size = bUsed;
                        write_sq.count++;
                }
        } /* uUsed may have been 0 */

        sq_play();

        return uUsed < 0? uUsed: uWritten;
}

static unsigned int sq_poll(struct file *file, struct poll_table_struct *wait)
{
        unsigned int mask = 0;
        int retVal;
        
        if (write_sq.locked == 0) {
                if ((retVal = sq_setup(&write_sq)) < 0)
                        return retVal;
                return 0;
        }
        if (file->f_mode & FMODE_WRITE )
                poll_wait(file, &write_sq.action_queue, wait);
        if (file->f_mode & FMODE_WRITE)
                if (write_sq.count < write_sq.max_active || write_sq.block_size - write_sq.rear_size > 0)
                        mask |= POLLOUT | POLLWRNORM;
        return mask;

}

static inline void sq_init_waitqueue(struct sound_queue *sq)
{
        init_waitqueue_head(&sq->action_queue);
        init_waitqueue_head(&sq->open_queue);
        init_waitqueue_head(&sq->sync_queue);
        sq->busy = 0;
}

#if 0 /* blocking open() */
static inline void sq_wake_up(struct sound_queue *sq, struct file *file,
                              fmode_t mode)
{
        if (file->f_mode & mode) {
                sq->busy = 0; /* CHECK: IS THIS OK??? */
                WAKE_UP(sq->open_queue);
        }
}
#endif

static int sq_open2(struct sound_queue *sq, struct file *file, fmode_t mode,
                    int numbufs, int bufsize)
{
        int rc = 0;

        if (file->f_mode & mode) {
                if (sq->busy) {
#if 0 /* blocking open() */
                        rc = -EBUSY;
                        if (file->f_flags & O_NONBLOCK)
                                return rc;
                        rc = -EINTR;
                        if (wait_event_interruptible(sq->open_queue, !sq->busy))
                                return rc;
                        rc = 0;
#else
                        /* OSS manual says we will return EBUSY regardless
                           of O_NOBLOCK.
                        */
                        return -EBUSY ;
#endif
                }
                sq->busy = 1; /* Let's play spot-the-race-condition */

                /* allocate the default number & size of buffers.
                   (i.e. specified in _setup() or as module params)
                   can't be changed at the moment - but _could_ be perhaps
                   in the setfragments ioctl.
                */
                if (( rc = sq_allocate_buffers(sq, numbufs, bufsize))) {
#if 0 /* blocking open() */
                        sq_wake_up(sq, file, mode);
#else
                        sq->busy = 0 ;
#endif
                        return rc;
                }

                sq->non_blocking = file->f_flags & O_NONBLOCK;
        }
        return rc;
}

#define write_sq_init_waitqueue()       sq_init_waitqueue(&write_sq)
#if 0 /* blocking open() */
#define write_sq_wake_up(file)          sq_wake_up(&write_sq, file, FMODE_WRITE)
#endif
#define write_sq_release_buffers()      sq_release_buffers(&write_sq)
#define write_sq_open(file)     \
        sq_open2(&write_sq, file, FMODE_WRITE, numWriteBufs, writeBufSize )

static int sq_open(struct inode *inode, struct file *file)
{
        int rc;

        mutex_lock(&dmasound_core_mutex);
        if (!try_module_get(dmasound.mach.owner)) {
                mutex_unlock(&dmasound_core_mutex);
                return -ENODEV;
        }

        rc = write_sq_open(file); /* checks the f_mode */
        if (rc)
                goto out;
        if (file->f_mode & FMODE_READ) {
                /* TODO: if O_RDWR, release any resources grabbed by write part */
                rc = -ENXIO ; /* I think this is what is required by open(2) */
                goto out;
        }

        if (dmasound.mach.sq_open)
            dmasound.mach.sq_open(file->f_mode);

        /* CHECK whether this is sensible - in the case that dsp0 could be opened
          O_RDONLY and dsp1 could be opened O_WRONLY
        */

        dmasound.minDev = iminor(inode) & 0x0f;

        /* OK. - we should make some attempt at consistency. At least the H'ware
           options should be set with a valid mode.  We will make it that the LL
           driver must supply defaults for hard & soft params.
        */

        if (shared_resource_owner == 0) {
                /* you can make this AFMT_U8/mono/8K if you want to mimic old
                   OSS behaviour - while we still have soft translations ;-) */
                dmasound.soft = dmasound.mach.default_soft ;
                dmasound.dsp = dmasound.mach.default_soft ;
                dmasound.hard = dmasound.mach.default_hard ;
        }

#ifndef DMASOUND_STRICT_OSS_COMPLIANCE
        /* none of the current LL drivers can actually do this "native" at the moment
           OSS does not really require us to supply /dev/audio if we can't do it.
        */
        if (dmasound.minDev == SND_DEV_AUDIO) {
                sound_set_speed(8000);
                sound_set_stereo(0);
                sound_set_format(AFMT_MU_LAW);
        }
#endif
        mutex_unlock(&dmasound_core_mutex);
        return 0;
 out:
        module_put(dmasound.mach.owner);
        mutex_unlock(&dmasound_core_mutex);
        return rc;
}

static void sq_reset_output(void)
{
        sound_silence(); /* this _must_ stop DMA, we might be about to lose the buffers */
        write_sq.active = 0;
        write_sq.count = 0;
        write_sq.rear_size = 0;
        /* write_sq.front = (write_sq.rear+1) % write_sq.max_count;*/
        write_sq.front = 0 ;
        write_sq.rear = -1 ; /* same as for set-up */

        /* OK - we can unlock the parameters and fragment settings */
        write_sq.locked = 0 ;
        write_sq.user_frags = 0 ;
        write_sq.user_frag_size = 0 ;
}

static void sq_reset(void)
{
        sq_reset_output() ;
        /* we could consider resetting the shared_resources_owner here... but I
           think it is probably still rather non-obvious to application writer
        */

        /* we release everything else though */
        shared_resources_initialised = 0 ;
}

static int sq_fsync(void)
{
        int rc = 0;
        int timeout = 5;

        write_sq.syncing |= 1;
        sq_play();      /* there may be an incomplete frame waiting */

        while (write_sq.active) {
                wait_event_interruptible_timeout(write_sq.sync_queue,
                                                 !write_sq.active, HZ);
                if (signal_pending(current)) {
                        /* While waiting for audio output to drain, an
                         * interrupt occurred.  Stop audio output immediately
                         * and clear the queue. */
                        sq_reset_output();
                        rc = -EINTR;
                        break;
                }
                if (!--timeout) {
                        printk(KERN_WARNING "dmasound: Timeout draining output\n");
                        sq_reset_output();
                        rc = -EIO;
                        break;
                }
        }

        /* flag no sync regardless of whether we had a DSP_POST or not */
        write_sq.syncing = 0 ;
        return rc;
}

static int sq_release(struct inode *inode, struct file *file)
{
        int rc = 0;

        mutex_lock(&dmasound_core_mutex);

        if (file->f_mode & FMODE_WRITE) {
                if (write_sq.busy)
                        rc = sq_fsync();

                sq_reset_output() ; /* make sure dma is stopped and all is quiet */
                write_sq_release_buffers();
                write_sq.busy = 0;
        }

        if (file->f_mode & shared_resource_owner) { /* it's us that has them */
                shared_resource_owner = 0 ;
                shared_resources_initialised = 0 ;
                dmasound.hard = dmasound.mach.default_hard ;
        }

        module_put(dmasound.mach.owner);

#if 0 /* blocking open() */
        /* Wake up a process waiting for the queue being released.
         * Note: There may be several processes waiting for a call
         * to open() returning. */

        /* Iain: hmm I don't understand this next comment ... */
        /* There is probably a DOS atack here. They change the mode flag. */
        /* XXX add check here,*/
        read_sq_wake_up(file); /* checks f_mode */
        write_sq_wake_up(file); /* checks f_mode */
#endif /* blocking open() */

        mutex_unlock(&dmasound_core_mutex);

        return rc;
}

/* here we see if we have a right to modify format, channels, size and so on
   if no-one else has claimed it already then we do...

   TODO: We might change this to mask O_RDWR such that only one or the other channel
   is the owner - if we have problems.
*/

static int shared_resources_are_mine(fmode_t md)
{
        if (shared_resource_owner)
                return (shared_resource_owner & md) != 0;
        else {
                shared_resource_owner = md ;
                return 1 ;
        }
}

/* if either queue is locked we must deny the right to change shared params
*/

static int queues_are_quiescent(void)
{
        if (write_sq.locked)
                return 0 ;
        return 1 ;
}

/* check and set a queue's fragments per user's wishes...
   we will check against the pre-defined literals and the actual sizes.
   This is a bit fraught - because soft translations can mess with our
   buffer requirements *after* this call - OSS says "call setfrags first"
*/

/* It is possible to replace all the -EINVAL returns with an override that
   just puts the allowable value in.  This may be what many OSS apps require
*/

static int set_queue_frags(struct sound_queue *sq, int bufs, int size)
{
        if (sq->locked) {
#ifdef DEBUG_DMASOUND
printk("dmasound_core: tried to set_queue_frags on a locked queue\n") ;
#endif
                return -EINVAL ;
        }

        if ((size < MIN_FRAG_SIZE) || (size > MAX_FRAG_SIZE))
                return -EINVAL ;
        size = (1<<size) ; /* now in bytes */
        if (size > sq->bufSize)
                return -EINVAL ; /* this might still not work */

        if (bufs <= 0)
                return -EINVAL ;
        if (bufs > sq->numBufs) /* the user is allowed say "don't care" with 0x7fff */
                bufs = sq->numBufs ;

        /* there is, currently, no way to specify max_active separately
           from max_count.  This could be a LL driver issue - I guess
           if there is a requirement for these values to be different then
          we will have to pass that info. up to this level.
        */
        sq->user_frags =
        sq->max_active = bufs ;
        sq->user_frag_size = size ;

        return 0 ;
}

static int sq_ioctl(struct file *file, u_int cmd, u_long arg)
{
        int val, result;
        u_long fmt;
        int data;
        int size, nbufs;
        audio_buf_info info;

        switch (cmd) {
        case SNDCTL_DSP_RESET:
                sq_reset();
                return 0;
                break ;
        case SNDCTL_DSP_GETFMTS:
                fmt = dmasound.mach.hardware_afmts ; /* this is what OSS says.. */
                return IOCTL_OUT(arg, fmt);
                break ;
        case SNDCTL_DSP_GETBLKSIZE:
                /* this should tell the caller about bytes that the app can
                   read/write - the app doesn't care about our internal buffers.
                   We force sq_setup() here as per OSS 1.1 (which should
                   compute the values necessary).
                   Since there is no mechanism to specify read/write separately, for
                   fds opened O_RDWR, the write_sq values will, arbitrarily, overwrite
                   the read_sq ones.
                */
                size = 0 ;
                if (file->f_mode & FMODE_WRITE) {
                        if ( !write_sq.locked )
                                sq_setup(&write_sq) ;
                        size = write_sq.user_frag_size ;
                }
                return IOCTL_OUT(arg, size);
                break ;
        case SNDCTL_DSP_POST:
                /* all we are going to do is to tell the LL that any
                   partial frags can be queued for output.
                   The LL will have to clear this flag when last output
                   is queued.
                */
                write_sq.syncing |= 0x2 ;
                sq_play() ;
                return 0 ;
        case SNDCTL_DSP_SYNC:
                /* This call, effectively, has the same behaviour as SNDCTL_DSP_RESET
                   except that it waits for output to finish before resetting
                   everything - read, however, is killed immediately.
                */
                result = 0 ;
                if (file->f_mode & FMODE_WRITE) {
                        result = sq_fsync();
                        sq_reset_output() ;
                }
                /* if we are the shared resource owner then release them */
                if (file->f_mode & shared_resource_owner)
                        shared_resources_initialised = 0 ;
                return result ;
                break ;
        case SOUND_PCM_READ_RATE:
                return IOCTL_OUT(arg, dmasound.soft.speed);
        case SNDCTL_DSP_SPEED:
                /* changing this on the fly will have weird effects on the sound.
                   Where there are rate conversions implemented in soft form - it
                   will cause the _ctx_xxx() functions to be substituted.
                   However, there doesn't appear to be any reason to dis-allow it from
                   a driver pov.
                */
                if (shared_resources_are_mine(file->f_mode)) {
                        IOCTL_IN(arg, data);
                        data = sound_set_speed(data) ;
                        shared_resources_initialised = 0 ;
                        return IOCTL_OUT(arg, data);
                } else
                        return -EINVAL ;
                break ;
        /* OSS says these next 4 actions are undefined when the device is
           busy/active - we will just return -EINVAL.
           To be allowed to change one - (a) you have to own the right
            (b) the queue(s) must be quiescent
        */
        case SNDCTL_DSP_STEREO:
                if (shared_resources_are_mine(file->f_mode) &&
                    queues_are_quiescent()) {
                        IOCTL_IN(arg, data);
                        shared_resources_initialised = 0 ;
                        return IOCTL_OUT(arg, sound_set_stereo(data));
                } else
                        return -EINVAL ;
                break ;
        case SOUND_PCM_WRITE_CHANNELS:
                if (shared_resources_are_mine(file->f_mode) &&
                    queues_are_quiescent()) {
                        IOCTL_IN(arg, data);
                        /* the user might ask for 20 channels, we will return 1 or 2 */
                        shared_resources_initialised = 0 ;
                        return IOCTL_OUT(arg, sound_set_stereo(data-1)+1);
                } else
                        return -EINVAL ;
                break ;
        case SNDCTL_DSP_SETFMT:
                if (shared_resources_are_mine(file->f_mode) &&
                    queues_are_quiescent()) {
                        int format;
                        IOCTL_IN(arg, data);
                        shared_resources_initialised = 0 ;
                        format = sound_set_format(data);
                        result = IOCTL_OUT(arg, format);
                        if (result < 0)
                                return result;
                        if (format != data && data != AFMT_QUERY)
                                return -EINVAL;
                        return 0;
                } else
                        return -EINVAL ;
        case SNDCTL_DSP_SUBDIVIDE:
                return -EINVAL ;
        case SNDCTL_DSP_SETFRAGMENT:
                /* we can do this independently for the two queues - with the
                   proviso that for fds opened O_RDWR we cannot separate the
                   actions and both queues will be set per the last call.
                   NOTE: this does *NOT* actually set the queue up - merely
                   registers our intentions.
                */
                IOCTL_IN(arg, data);
                result = 0 ;
                nbufs = (data >> 16) & 0x7fff ; /* 0x7fff is 'use maximum' */
                size = data & 0xffff;
                if (file->f_mode & FMODE_WRITE) {
                        result = set_queue_frags(&write_sq, nbufs, size) ;
                        if (result)
                                return result ;
                }
                /* NOTE: this return value is irrelevant - OSS specifically says that
                   the value is 'random' and that the user _must_ check the actual
                   frags values using SNDCTL_DSP_GETBLKSIZE or similar */
                return IOCTL_OUT(arg, data);
                break ;
        case SNDCTL_DSP_GETOSPACE:
                /*
                */
                if (file->f_mode & FMODE_WRITE) {
                        if ( !write_sq.locked )
                                sq_setup(&write_sq) ;
                        info.fragments = write_sq.max_active - write_sq.count;
                        info.fragstotal = write_sq.max_active;
                        info.fragsize = write_sq.user_frag_size;
                        info.bytes = info.fragments * info.fragsize;
                        if (copy_to_user((void __user *)arg, &info, sizeof(info)))
                                return -EFAULT;
                        return 0;
                } else
                        return -EINVAL ;
                break ;
        case SNDCTL_DSP_GETCAPS:
                val = dmasound.mach.capabilities & 0xffffff00;
                return IOCTL_OUT(arg,val);

        default:
                return mixer_ioctl(file, cmd, arg);
        }
        return -EINVAL;
}

static long sq_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
{
        int ret;

        mutex_lock(&dmasound_core_mutex);
        ret = sq_ioctl(file, cmd, arg);
        mutex_unlock(&dmasound_core_mutex);

        return ret;
}

static const struct file_operations sq_fops =
{
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
        .write          = sq_write,
        .poll           = sq_poll,
        .unlocked_ioctl = sq_unlocked_ioctl,
        .open           = sq_open,
        .release        = sq_release,
};

static int sq_init(void)
{
        const struct file_operations *fops = &sq_fops;
#ifndef MODULE
        int sq_unit;
#endif

        sq_unit = register_sound_dsp(fops, -1);
        if (sq_unit < 0) {
                printk(KERN_ERR "dmasound_core: couldn't register fops\n") ;
                return sq_unit ;
        }

        write_sq_init_waitqueue();

        /* These parameters will be restored for every clean open()
         * in the case of multiple open()s (e.g. dsp0 & dsp1) they
         * will be set so long as the shared resources have no owner.
         */

        if (shared_resource_owner == 0) {
                dmasound.soft = dmasound.mach.default_soft ;
                dmasound.hard = dmasound.mach.default_hard ;
                dmasound.dsp = dmasound.mach.default_soft ;
                shared_resources_initialised = 0 ;
        }
        return 0 ;
}


    /*
     *  /dev/sndstat
     */

/* we allow more space for record-enabled because there are extra output lines.
   the number here must include the amount we are prepared to give to the low-level
   driver.
*/

#define STAT_BUFF_LEN 768

/* this is how much space we will allow the low-level driver to use
   in the stat buffer.  Currently, 2 * (80 character line + <NL>).
   We do not police this (it is up to the ll driver to be honest).
*/

#define LOW_LEVEL_STAT_ALLOC 162

static struct {
    int busy;
    char buf[STAT_BUFF_LEN];    /* state.buf should not overflow! */
    int len, ptr;
} state;

/* publish this function for use by low-level code, if required */

static char *get_afmt_string(int afmt)
{
        switch(afmt) {
            case AFMT_MU_LAW:
                return "mu-law";
                break;
            case AFMT_A_LAW:
                return "A-law";
                break;
            case AFMT_U8:
                return "unsigned 8 bit";
                break;
            case AFMT_S8:
                return "signed 8 bit";
                break;
            case AFMT_S16_BE:
                return "signed 16 bit BE";
                break;
            case AFMT_U16_BE:
                return "unsigned 16 bit BE";
                break;
            case AFMT_S16_LE:
                return "signed 16 bit LE";
                break;
            case AFMT_U16_LE:
                return "unsigned 16 bit LE";
                break;
            case 0:
                return "format not set" ;
                break ;
            default:
                break ;
        }
        return "ERROR: Unsupported AFMT_XXXX code" ;
}

static int state_open(struct inode *inode, struct file *file)
{
        char *buffer = state.buf;
        int len = 0;
        int ret;

        mutex_lock(&dmasound_core_mutex);
        ret = -EBUSY;
        if (state.busy)
                goto out;

        ret = -ENODEV;
        if (!try_module_get(dmasound.mach.owner))
                goto out;

        state.ptr = 0;
        state.busy = 1;

        len += sprintf(buffer+len, "%sDMA sound driver rev %03d :\n",
                dmasound.mach.name, (DMASOUND_CORE_REVISION<<4) +
                ((dmasound.mach.version>>8) & 0x0f));
        len += sprintf(buffer+len,
                "Core driver edition %02d.%02d : %s driver edition %02d.%02d\n",
                DMASOUND_CORE_REVISION, DMASOUND_CORE_EDITION, dmasound.mach.name2,
                (dmasound.mach.version >> 8), (dmasound.mach.version & 0xff)) ;

        /* call the low-level module to fill in any stat info. that it has
           if present.  Maximum buffer usage is specified.
        */

        if (dmasound.mach.state_info)
                len += dmasound.mach.state_info(buffer+len,
                        (size_t) LOW_LEVEL_STAT_ALLOC) ;

        /* make usage of the state buffer as deterministic as poss.
           exceptional conditions could cause overrun - and this is flagged as
           a kernel error.
        */

        /* formats and settings */

        len += sprintf(buffer+len,"\t\t === Formats & settings ===\n") ;
        len += sprintf(buffer+len,"Parameter %20s%20s\n","soft","hard") ;
        len += sprintf(buffer+len,"Format   :%20s%20s\n",
                get_afmt_string(dmasound.soft.format),
                get_afmt_string(dmasound.hard.format));

        len += sprintf(buffer+len,"Samp Rate:%14d s/sec%14d s/sec\n",
                       dmasound.soft.speed, dmasound.hard.speed);

        len += sprintf(buffer+len,"Channels :%20s%20s\n",
                       dmasound.soft.stereo ? "stereo" : "mono",
                       dmasound.hard.stereo ? "stereo" : "mono" );

        /* sound queue status */

        len += sprintf(buffer+len,"\t\t === Sound Queue status ===\n");
        len += sprintf(buffer+len,"Allocated:%8s%6s\n","Buffers","Size") ;
        len += sprintf(buffer+len,"%9s:%8d%6d\n",
                "write", write_sq.numBufs, write_sq.bufSize) ;
        len += sprintf(buffer+len,
                "Current  : MaxFrg FragSiz MaxAct Frnt Rear "
                "Cnt RrSize A B S L  xruns\n") ;
        len += sprintf(buffer+len,"%9s:%7d%8d%7d%5d%5d%4d%7d%2d%2d%2d%2d%7d\n",
                "write", write_sq.max_count, write_sq.block_size,
                write_sq.max_active, write_sq.front, write_sq.rear,
                write_sq.count, write_sq.rear_size, write_sq.active,
                write_sq.busy, write_sq.syncing, write_sq.locked, write_sq.xruns) ;
#ifdef DEBUG_DMASOUND
printk("dmasound: stat buffer used %d bytes\n", len) ;
#endif

        if (len >= STAT_BUFF_LEN)
                printk(KERN_ERR "dmasound_core: stat buffer overflowed!\n");

        state.len = len;
        ret = 0;
out:
        mutex_unlock(&dmasound_core_mutex);
        return ret;
}

static int state_release(struct inode *inode, struct file *file)
{
        mutex_lock(&dmasound_core_mutex);
        state.busy = 0;
        module_put(dmasound.mach.owner);
        mutex_unlock(&dmasound_core_mutex);
        return 0;
}

static ssize_t state_read(struct file *file, char __user *buf, size_t count,
                          loff_t *ppos)
{
        int n = state.len - state.ptr;
        if (n > count)
                n = count;
        if (n <= 0)
                return 0;
        if (copy_to_user(buf, &state.buf[state.ptr], n))
                return -EFAULT;
        state.ptr += n;
        return n;
}

static const struct file_operations state_fops = {
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
        .read           = state_read,
        .open           = state_open,
        .release        = state_release,
};

static int state_init(void)
{
#ifndef MODULE
        int state_unit;
#endif
        state_unit = register_sound_special(&state_fops, SND_DEV_STATUS);
        if (state_unit < 0)
                return state_unit ;
        state.busy = 0;
        return 0 ;
}


    /*
     *  Config & Setup
     *
     *  This function is called by _one_ chipset-specific driver
     */

int dmasound_init(void)
{
        int res ;
#ifdef MODULE
        if (irq_installed)
                return -EBUSY;
#endif

        /* Set up sound queue, /dev/audio and /dev/dsp. */

        /* Set default settings. */
        if ((res = sq_init()) < 0)
                return res ;

        /* Set up /dev/sndstat. */
        if ((res = state_init()) < 0)
                return res ;

        /* Set up /dev/mixer. */
        mixer_init();

        if (!dmasound.mach.irqinit()) {
                printk(KERN_ERR "DMA sound driver: Interrupt initialization failed\n");
                return -ENODEV;
        }
#ifdef MODULE
        irq_installed = 1;
#endif

        printk(KERN_INFO "%s DMA sound driver rev %03d installed\n",
                dmasound.mach.name, (DMASOUND_CORE_REVISION<<4) +
                ((dmasound.mach.version>>8) & 0x0f));
        printk(KERN_INFO
                "Core driver edition %02d.%02d : %s driver edition %02d.%02d\n",
                DMASOUND_CORE_REVISION, DMASOUND_CORE_EDITION, dmasound.mach.name2,
                (dmasound.mach.version >> 8), (dmasound.mach.version & 0xff)) ;
        printk(KERN_INFO "Write will use %4d fragments of %7d bytes as default\n",
                numWriteBufs, writeBufSize) ;
        return 0;
}

#ifdef MODULE

void dmasound_deinit(void)
{
        if (irq_installed) {
                sound_silence();
                dmasound.mach.irqcleanup();
                irq_installed = 0;
        }

        write_sq_release_buffers();

        if (mixer_unit >= 0)
                unregister_sound_mixer(mixer_unit);
        if (state_unit >= 0)
                unregister_sound_special(state_unit);
        if (sq_unit >= 0)
                unregister_sound_dsp(sq_unit);
}

#else /* !MODULE */

static int dmasound_setup(char *str)
{
        int ints[6], size;

        str = get_options(str, ARRAY_SIZE(ints), ints);

        /* check the bootstrap parameter for "dmasound=" */

        /* FIXME: other than in the most naive of cases there is no sense in these
         *        buffers being other than powers of two.  This is not checked yet.
         */

        switch (ints[0]) {
        case 3:
                if ((ints[3] < 0) || (ints[3] > MAX_CATCH_RADIUS))
                        printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
                else
                        catchRadius = ints[3];
                /* fall through */
        case 2:
                if (ints[1] < MIN_BUFFERS)
                        printk("dmasound_setup: invalid number of buffers, using default = %d\n", numWriteBufs);
                else
                        numWriteBufs = ints[1];
                /* fall through */
        case 1:
                if ((size = ints[2]) < 256) /* check for small buffer specs */
                        size <<= 10 ;
                if (size < MIN_BUFSIZE || size > MAX_BUFSIZE)
                        printk("dmasound_setup: invalid write buffer size, using default = %d\n", writeBufSize);
                else
                        writeBufSize = size;
        case 0:
                break;
        default:
                printk("dmasound_setup: invalid number of arguments\n");
                return 0;
        }
        return 1;
}

__setup("dmasound=", dmasound_setup);

#endif /* !MODULE */

    /*
     *  Conversion tables
     */

#ifdef HAS_8BIT_TABLES
/* 8 bit mu-law */

char dmasound_ulaw2dma8[] = {
        -126,   -122,   -118,   -114,   -110,   -106,   -102,   -98,
        -94,    -90,    -86,    -82,    -78,    -74,    -70,    -66,
        -63,    -61,    -59,    -57,    -55,    -53,    -51,    -49,
        -47,    -45,    -43,    -41,    -39,    -37,    -35,    -33,
        -31,    -30,    -29,    -28,    -27,    -26,    -25,    -24,
        -23,    -22,    -21,    -20,    -19,    -18,    -17,    -16,
        -16,    -15,    -15,    -14,    -14,    -13,    -13,    -12,
        -12,    -11,    -11,    -10,    -10,    -9,     -9,     -8,
        -8,     -8,     -7,     -7,     -7,     -7,     -6,     -6,
        -6,     -6,     -5,     -5,     -5,     -5,     -4,     -4,
        -4,     -4,     -4,     -4,     -3,     -3,     -3,     -3,
        -3,     -3,     -3,     -3,     -2,     -2,     -2,     -2,
        -2,     -2,     -2,     -2,     -2,     -2,     -2,     -2,
        -1,     -1,     -1,     -1,     -1,     -1,     -1,     -1,
        -1,     -1,     -1,     -1,     -1,     -1,     -1,     -1,
        -1,     -1,     -1,     -1,     -1,     -1,     -1,     0,
        125,    121,    117,    113,    109,    105,    101,    97,
        93,     89,     85,     81,     77,     73,     69,     65,
        62,     60,     58,     56,     54,     52,     50,     48,
        46,     44,     42,     40,     38,     36,     34,     32,
        30,     29,     28,     27,     26,     25,     24,     23,
        22,     21,     20,     19,     18,     17,     16,     15,
        15,     14,     14,     13,     13,     12,     12,     11,
        11,     10,     10,     9,      9,      8,      8,      7,
        7,      7,      6,      6,      6,      6,      5,      5,
        5,      5,      4,      4,      4,      4,      3,      3,
        3,      3,      3,      3,      2,      2,      2,      2,
        2,      2,      2,      2,      1,      1,      1,      1,
        1,      1,      1,      1,      1,      1,      1,      1,
        0,      0,      0,      0,      0,      0,      0,      0,
        0,      0,      0,      0,      0,      0,      0,      0,
        0,      0,      0,      0,      0,      0,      0,      0
};

/* 8 bit A-law */

char dmasound_alaw2dma8[] = {
        -22,    -21,    -24,    -23,    -18,    -17,    -20,    -19,
        -30,    -29,    -32,    -31,    -26,    -25,    -28,    -27,
        -11,    -11,    -12,    -12,    -9,     -9,     -10,    -10,
        -15,    -15,    -16,    -16,    -13,    -13,    -14,    -14,
        -86,    -82,    -94,    -90,    -70,    -66,    -78,    -74,
        -118,   -114,   -126,   -122,   -102,   -98,    -110,   -106,
        -43,    -41,    -47,    -45,    -35,    -33,    -39,    -37,
        -59,    -57,    -63,    -61,    -51,    -49,    -55,    -53,
        -2,     -2,     -2,     -2,     -2,     -2,     -2,     -2,
        -2,     -2,     -2,     -2,     -2,     -2,     -2,     -2,
        -1,     -1,     -1,     -1,     -1,     -1,     -1,     -1,
        -1,     -1,     -1,     -1,     -1,     -1,     -1,     -1,
        -6,     -6,     -6,     -6,     -5,     -5,     -5,     -5,
        -8,     -8,     -8,     -8,     -7,     -7,     -7,     -7,
        -3,     -3,     -3,     -3,     -3,     -3,     -3,     -3,
        -4,     -4,     -4,     -4,     -4,     -4,     -4,     -4,
        21,     20,     23,     22,     17,     16,     19,     18,
        29,     28,     31,     30,     25,     24,     27,     26,
        10,     10,     11,     11,     8,      8,      9,      9,
        14,     14,     15,     15,     12,     12,     13,     13,
        86,     82,     94,     90,     70,     66,     78,     74,
        118,    114,    126,    122,    102,    98,     110,    106,
        43,     41,     47,     45,     35,     33,     39,     37,
        59,     57,     63,     61,     51,     49,     55,     53,
        1,      1,      1,      1,      1,      1,      1,      1,
        1,      1,      1,      1,      1,      1,      1,      1,
        0,      0,      0,      0,      0,      0,      0,      0,
        0,      0,      0,      0,      0,      0,      0,      0,
        5,      5,      5,      5,      4,      4,      4,      4,
        7,      7,      7,      7,      6,      6,      6,      6,
        2,      2,      2,      2,      2,      2,      2,      2,
        3,      3,      3,      3,      3,      3,      3,      3
};
#endif /* HAS_8BIT_TABLES */

    /*
     *  Visible symbols for modules
     */

EXPORT_SYMBOL(dmasound);
EXPORT_SYMBOL(dmasound_init);
#ifdef MODULE
EXPORT_SYMBOL(dmasound_deinit);
#endif
EXPORT_SYMBOL(dmasound_write_sq);
EXPORT_SYMBOL(dmasound_catchRadius);
#ifdef HAS_8BIT_TABLES
EXPORT_SYMBOL(dmasound_ulaw2dma8);
EXPORT_SYMBOL(dmasound_alaw2dma8);
#endif