Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / include / uapi / linux / tty_flags.h
1 #ifndef _LINUX_TTY_FLAGS_H
2 #define _LINUX_TTY_FLAGS_H
3
4 /*
5  * Definitions for async_struct (and serial_struct) flags field also
6  * shared by the tty_port flags structures.
7  *
8  * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
9  *
10  * Bits [0..ASYNCB_LAST_USER] are userspace defined/visible/changeable
11  * [x] in the bit comments indicates the flag is defunct and no longer used.
12  */
13 #define ASYNCB_HUP_NOTIFY        0 /* Notify getty on hangups and closes
14                                     * on the callout port */
15 #define ASYNCB_FOURPORT          1 /* Set OU1, OUT2 per AST Fourport settings */
16 #define ASYNCB_SAK               2 /* Secure Attention Key (Orange book) */
17 #define ASYNCB_SPLIT_TERMIOS     3 /* [x] Separate termios for dialin/callout */
18 #define ASYNCB_SPD_HI            4 /* Use 56000 instead of 38400 bps */
19 #define ASYNCB_SPD_VHI           5 /* Use 115200 instead of 38400 bps */
20 #define ASYNCB_SKIP_TEST         6 /* Skip UART test during autoconfiguration */
21 #define ASYNCB_AUTO_IRQ          7 /* Do automatic IRQ during
22                                     * autoconfiguration */
23 #define ASYNCB_SESSION_LOCKOUT   8 /* [x] Lock out cua opens based on session */
24 #define ASYNCB_PGRP_LOCKOUT      9 /* [x] Lock out cua opens based on pgrp */
25 #define ASYNCB_CALLOUT_NOHUP    10 /* [x] Don't do hangups for cua device */
26 #define ASYNCB_HARDPPS_CD       11 /* Call hardpps when CD goes high  */
27 #define ASYNCB_SPD_SHI          12 /* Use 230400 instead of 38400 bps */
28 #define ASYNCB_LOW_LATENCY      13 /* Request low latency behaviour */
29 #define ASYNCB_BUGGY_UART       14 /* This is a buggy UART, skip some safety
30                                     * checks.  Note: can be dangerous! */
31 #define ASYNCB_AUTOPROBE        15 /* [x] Port was autoprobed by PCI/PNP code */
32 #define ASYNCB_MAGIC_MULTIPLIER 16 /* Use special CLK or divisor */
33 #define ASYNCB_LAST_USER        16
34
35 /* Internal flags used only by kernel */
36 #define ASYNCB_INITIALIZED      31 /* Serial port was initialized */
37 #define ASYNCB_SUSPENDED        30 /* Serial port is suspended */
38 #define ASYNCB_NORMAL_ACTIVE    29 /* Normal device is active */
39 #define ASYNCB_BOOT_AUTOCONF    28 /* Autoconfigure port on bootup */
40 #define ASYNCB_CLOSING          27 /* Serial port is closing */
41 #define ASYNCB_CTS_FLOW         26 /* Do CTS flow control */
42 #define ASYNCB_CHECK_CD         25 /* i.e., CLOCAL */
43 #define ASYNCB_SHARE_IRQ        24 /* for multifunction cards, no longer used */
44 #define ASYNCB_CONS_FLOW        23 /* flow control for console  */
45 #define ASYNCB_FIRST_KERNEL     22
46
47 #define ASYNC_HUP_NOTIFY        (1U << ASYNCB_HUP_NOTIFY)
48 #define ASYNC_SUSPENDED         (1U << ASYNCB_SUSPENDED)
49 #define ASYNC_FOURPORT          (1U << ASYNCB_FOURPORT)
50 #define ASYNC_SAK               (1U << ASYNCB_SAK)
51 #define ASYNC_SPLIT_TERMIOS     (1U << ASYNCB_SPLIT_TERMIOS)
52 #define ASYNC_SPD_HI            (1U << ASYNCB_SPD_HI)
53 #define ASYNC_SPD_VHI           (1U << ASYNCB_SPD_VHI)
54 #define ASYNC_SKIP_TEST         (1U << ASYNCB_SKIP_TEST)
55 #define ASYNC_AUTO_IRQ          (1U << ASYNCB_AUTO_IRQ)
56 #define ASYNC_SESSION_LOCKOUT   (1U << ASYNCB_SESSION_LOCKOUT)
57 #define ASYNC_PGRP_LOCKOUT      (1U << ASYNCB_PGRP_LOCKOUT)
58 #define ASYNC_CALLOUT_NOHUP     (1U << ASYNCB_CALLOUT_NOHUP)
59 #define ASYNC_HARDPPS_CD        (1U << ASYNCB_HARDPPS_CD)
60 #define ASYNC_SPD_SHI           (1U << ASYNCB_SPD_SHI)
61 #define ASYNC_LOW_LATENCY       (1U << ASYNCB_LOW_LATENCY)
62 #define ASYNC_BUGGY_UART        (1U << ASYNCB_BUGGY_UART)
63 #define ASYNC_AUTOPROBE         (1U << ASYNCB_AUTOPROBE)
64 #define ASYNC_MAGIC_MULTIPLIER  (1U << ASYNCB_MAGIC_MULTIPLIER)
65
66 #define ASYNC_FLAGS             ((1U << (ASYNCB_LAST_USER + 1)) - 1)
67 #define ASYNC_DEPRECATED        (ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \
68                 ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)
69 #define ASYNC_USR_MASK          (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
70                 ASYNC_LOW_LATENCY)
71 #define ASYNC_SPD_CUST          (ASYNC_SPD_HI|ASYNC_SPD_VHI)
72 #define ASYNC_SPD_WARP          (ASYNC_SPD_HI|ASYNC_SPD_SHI)
73 #define ASYNC_SPD_MASK          (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
74
75 #define ASYNC_INITIALIZED       (1U << ASYNCB_INITIALIZED)
76 #define ASYNC_NORMAL_ACTIVE     (1U << ASYNCB_NORMAL_ACTIVE)
77 #define ASYNC_BOOT_AUTOCONF     (1U << ASYNCB_BOOT_AUTOCONF)
78 #define ASYNC_CLOSING           (1U << ASYNCB_CLOSING)
79 #define ASYNC_CTS_FLOW          (1U << ASYNCB_CTS_FLOW)
80 #define ASYNC_CHECK_CD          (1U << ASYNCB_CHECK_CD)
81 #define ASYNC_SHARE_IRQ         (1U << ASYNCB_SHARE_IRQ)
82 #define ASYNC_CONS_FLOW         (1U << ASYNCB_CONS_FLOW)
83 #define ASYNC_INTERNAL_FLAGS    (~((1U << ASYNCB_FIRST_KERNEL) - 1))
84
85 #endif