Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / include / uapi / linux / if.h
1 /*
2  * INET         An implementation of the TCP/IP protocol suite for the LINUX
3  *              operating system.  INET is implemented using the  BSD Socket
4  *              interface as the means of communication with the user level.
5  *
6  *              Global definitions for the INET interface module.
7  *
8  * Version:     @(#)if.h        1.0.2   04/18/93
9  *
10  * Authors:     Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
11  *              Ross Biro
12  *              Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13  *
14  *              This program is free software; you can redistribute it and/or
15  *              modify it under the terms of the GNU General Public License
16  *              as published by the Free Software Foundation; either version
17  *              2 of the License, or (at your option) any later version.
18  */
19 #ifndef _LINUX_IF_H
20 #define _LINUX_IF_H
21
22 #include <linux/types.h>                /* for "__kernel_caddr_t" et al */
23 #include <linux/socket.h>               /* for "struct sockaddr" et al  */
24 #include <linux/compiler.h>             /* for "__user" et al           */
25
26 #define IFNAMSIZ        16
27 #define IFALIASZ        256
28 #include <linux/hdlc/ioctl.h>
29
30 /**
31  * enum net_device_flags - &struct net_device flags
32  *
33  * These are the &struct net_device flags, they can be set by drivers, the
34  * kernel and some can be triggered by userspace. Userspace can query and
35  * set these flags using userspace utilities but there is also a sysfs
36  * entry available for all dev flags which can be queried and set. These flags
37  * are shared for all types of net_devices. The sysfs entries are available
38  * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
39  * are annotated below, note that only a few flags can be toggled and some
40  * other flags are always always preserved from the original net_device flags
41  * even if you try to set them via sysfs. Flags which are always preserved
42  * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile
43  * are annotated below as such.
44  *
45  * You should have a pretty good reason to be extending these flags.
46  *
47  * @IFF_UP: interface is up. Can be toggled through sysfs.
48  * @IFF_BROADCAST: broadcast address valid. Volatile.
49  * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
50  * @IFF_LOOPBACK: is a loopback net. Volatile.
51  * @IFF_POINTOPOINT: interface is has p-p link. Volatile.
52  * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
53  *      Volatile.
54  * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
55  * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
56  * @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
57  * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
58  *      sysfs.
59  * @IFF_MASTER: master of a load balancer. Volatile.
60  * @IFF_SLAVE: slave of a load balancer. Volatile.
61  * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
62  * @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
63  * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
64  * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
65  *      through sysfs.
66  * @IFF_LOWER_UP: driver signals L1 up. Volatile.
67  * @IFF_DORMANT: driver signals dormant. Volatile.
68  * @IFF_ECHO: echo sent packets. Volatile.
69  */
70 enum net_device_flags {
71         IFF_UP                          = 1<<0,  /* sysfs */
72         IFF_BROADCAST                   = 1<<1,  /* volatile */
73         IFF_DEBUG                       = 1<<2,  /* sysfs */
74         IFF_LOOPBACK                    = 1<<3,  /* volatile */
75         IFF_POINTOPOINT                 = 1<<4,  /* volatile */
76         IFF_NOTRAILERS                  = 1<<5,  /* sysfs */
77         IFF_RUNNING                     = 1<<6,  /* volatile */
78         IFF_NOARP                       = 1<<7,  /* sysfs */
79         IFF_PROMISC                     = 1<<8,  /* sysfs */
80         IFF_ALLMULTI                    = 1<<9,  /* sysfs */
81         IFF_MASTER                      = 1<<10, /* volatile */
82         IFF_SLAVE                       = 1<<11, /* volatile */
83         IFF_MULTICAST                   = 1<<12, /* sysfs */
84         IFF_PORTSEL                     = 1<<13, /* sysfs */
85         IFF_AUTOMEDIA                   = 1<<14, /* sysfs */
86         IFF_DYNAMIC                     = 1<<15, /* sysfs */
87         IFF_LOWER_UP                    = 1<<16, /* volatile */
88         IFF_DORMANT                     = 1<<17, /* volatile */
89         IFF_ECHO                        = 1<<18, /* volatile */
90 };
91
92 #define IFF_UP                          IFF_UP
93 #define IFF_BROADCAST                   IFF_BROADCAST
94 #define IFF_DEBUG                       IFF_DEBUG
95 #define IFF_LOOPBACK                    IFF_LOOPBACK
96 #define IFF_POINTOPOINT                 IFF_POINTOPOINT
97 #define IFF_NOTRAILERS                  IFF_NOTRAILERS
98 #define IFF_RUNNING                     IFF_RUNNING
99 #define IFF_NOARP                       IFF_NOARP
100 #define IFF_PROMISC                     IFF_PROMISC
101 #define IFF_ALLMULTI                    IFF_ALLMULTI
102 #define IFF_MASTER                      IFF_MASTER
103 #define IFF_SLAVE                       IFF_SLAVE
104 #define IFF_MULTICAST                   IFF_MULTICAST
105 #define IFF_PORTSEL                     IFF_PORTSEL
106 #define IFF_AUTOMEDIA                   IFF_AUTOMEDIA
107 #define IFF_DYNAMIC                     IFF_DYNAMIC
108 #define IFF_LOWER_UP                    IFF_LOWER_UP
109 #define IFF_DORMANT                     IFF_DORMANT
110 #define IFF_ECHO                        IFF_ECHO
111
112 #define IFF_VOLATILE    (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
113                 IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
114
115 #define IF_GET_IFACE    0x0001          /* for querying only */
116 #define IF_GET_PROTO    0x0002
117
118 /* For definitions see hdlc.h */
119 #define IF_IFACE_V35    0x1000          /* V.35 serial interface        */
120 #define IF_IFACE_V24    0x1001          /* V.24 serial interface        */
121 #define IF_IFACE_X21    0x1002          /* X.21 serial interface        */
122 #define IF_IFACE_T1     0x1003          /* T1 telco serial interface    */
123 #define IF_IFACE_E1     0x1004          /* E1 telco serial interface    */
124 #define IF_IFACE_SYNC_SERIAL 0x1005     /* can't be set by software     */
125 #define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
126
127 /* For definitions see hdlc.h */
128 #define IF_PROTO_HDLC   0x2000          /* raw HDLC protocol            */
129 #define IF_PROTO_PPP    0x2001          /* PPP protocol                 */
130 #define IF_PROTO_CISCO  0x2002          /* Cisco HDLC protocol          */
131 #define IF_PROTO_FR     0x2003          /* Frame Relay protocol         */
132 #define IF_PROTO_FR_ADD_PVC 0x2004      /*    Create FR PVC             */
133 #define IF_PROTO_FR_DEL_PVC 0x2005      /*    Delete FR PVC             */
134 #define IF_PROTO_X25    0x2006          /* X.25                         */
135 #define IF_PROTO_HDLC_ETH 0x2007        /* raw HDLC, Ethernet emulation */
136 #define IF_PROTO_FR_ADD_ETH_PVC 0x2008  /*  Create FR Ethernet-bridged PVC */
137 #define IF_PROTO_FR_DEL_ETH_PVC 0x2009  /*  Delete FR Ethernet-bridged PVC */
138 #define IF_PROTO_FR_PVC 0x200A          /* for reading PVC status       */
139 #define IF_PROTO_FR_ETH_PVC 0x200B
140 #define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
141
142 /* RFC 2863 operational status */
143 enum {
144         IF_OPER_UNKNOWN,
145         IF_OPER_NOTPRESENT,
146         IF_OPER_DOWN,
147         IF_OPER_LOWERLAYERDOWN,
148         IF_OPER_TESTING,
149         IF_OPER_DORMANT,
150         IF_OPER_UP,
151 };
152
153 /* link modes */
154 enum {
155         IF_LINK_MODE_DEFAULT,
156         IF_LINK_MODE_DORMANT,   /* limit upward transition to dormant */
157 };
158
159 /*
160  *      Device mapping structure. I'd just gone off and designed a 
161  *      beautiful scheme using only loadable modules with arguments
162  *      for driver options and along come the PCMCIA people 8)
163  *
164  *      Ah well. The get() side of this is good for WDSETUP, and it'll
165  *      be handy for debugging things. The set side is fine for now and
166  *      being very small might be worth keeping for clean configuration.
167  */
168
169 struct ifmap {
170         unsigned long mem_start;
171         unsigned long mem_end;
172         unsigned short base_addr; 
173         unsigned char irq;
174         unsigned char dma;
175         unsigned char port;
176         /* 3 bytes spare */
177 };
178
179 struct if_settings {
180         unsigned int type;      /* Type of physical device or protocol */
181         unsigned int size;      /* Size of the data allocated by the caller */
182         union {
183                 /* {atm/eth/dsl}_settings anyone ? */
184                 raw_hdlc_proto          __user *raw_hdlc;
185                 cisco_proto             __user *cisco;
186                 fr_proto                __user *fr;
187                 fr_proto_pvc            __user *fr_pvc;
188                 fr_proto_pvc_info       __user *fr_pvc_info;
189
190                 /* interface settings */
191                 sync_serial_settings    __user *sync;
192                 te1_settings            __user *te1;
193         } ifs_ifsu;
194 };
195
196 /*
197  * Interface request structure used for socket
198  * ioctl's.  All interface ioctl's must have parameter
199  * definitions which begin with ifr_name.  The
200  * remainder may be interface specific.
201  */
202
203 struct ifreq {
204 #define IFHWADDRLEN     6
205         union
206         {
207                 char    ifrn_name[IFNAMSIZ];            /* if name, e.g. "en0" */
208         } ifr_ifrn;
209         
210         union {
211                 struct  sockaddr ifru_addr;
212                 struct  sockaddr ifru_dstaddr;
213                 struct  sockaddr ifru_broadaddr;
214                 struct  sockaddr ifru_netmask;
215                 struct  sockaddr ifru_hwaddr;
216                 short   ifru_flags;
217                 int     ifru_ivalue;
218                 int     ifru_mtu;
219                 struct  ifmap ifru_map;
220                 char    ifru_slave[IFNAMSIZ];   /* Just fits the size */
221                 char    ifru_newname[IFNAMSIZ];
222                 void __user *   ifru_data;
223                 struct  if_settings ifru_settings;
224         } ifr_ifru;
225 };
226
227 #define ifr_name        ifr_ifrn.ifrn_name      /* interface name       */
228 #define ifr_hwaddr      ifr_ifru.ifru_hwaddr    /* MAC address          */
229 #define ifr_addr        ifr_ifru.ifru_addr      /* address              */
230 #define ifr_dstaddr     ifr_ifru.ifru_dstaddr   /* other end of p-p lnk */
231 #define ifr_broadaddr   ifr_ifru.ifru_broadaddr /* broadcast address    */
232 #define ifr_netmask     ifr_ifru.ifru_netmask   /* interface net mask   */
233 #define ifr_flags       ifr_ifru.ifru_flags     /* flags                */
234 #define ifr_metric      ifr_ifru.ifru_ivalue    /* metric               */
235 #define ifr_mtu         ifr_ifru.ifru_mtu       /* mtu                  */
236 #define ifr_map         ifr_ifru.ifru_map       /* device map           */
237 #define ifr_slave       ifr_ifru.ifru_slave     /* slave device         */
238 #define ifr_data        ifr_ifru.ifru_data      /* for use by interface */
239 #define ifr_ifindex     ifr_ifru.ifru_ivalue    /* interface index      */
240 #define ifr_bandwidth   ifr_ifru.ifru_ivalue    /* link bandwidth       */
241 #define ifr_qlen        ifr_ifru.ifru_ivalue    /* Queue length         */
242 #define ifr_newname     ifr_ifru.ifru_newname   /* New name             */
243 #define ifr_settings    ifr_ifru.ifru_settings  /* Device/proto settings*/
244
245 /*
246  * Structure used in SIOCGIFCONF request.
247  * Used to retrieve interface configuration
248  * for machine (useful for programs which
249  * must know all networks accessible).
250  */
251
252 struct ifconf  {
253         int     ifc_len;                        /* size of buffer       */
254         union {
255                 char __user *ifcu_buf;
256                 struct ifreq __user *ifcu_req;
257         } ifc_ifcu;
258 };
259 #define ifc_buf ifc_ifcu.ifcu_buf               /* buffer address       */
260 #define ifc_req ifc_ifcu.ifcu_req               /* array of structures  */
261
262 #endif /* _LINUX_IF_H */