Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / include / uapi / linux / atmdev.h
1 /* atmdev.h - ATM device driver declarations and various related items */
2  
3 /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
4  
5
6 #ifndef _UAPILINUX_ATMDEV_H
7 #define _UAPILINUX_ATMDEV_H
8
9
10 #include <linux/atmapi.h>
11 #include <linux/atm.h>
12 #include <linux/atmioc.h>
13
14
15 #define ESI_LEN         6
16
17 #define ATM_OC3_PCR     (155520000/270*260/8/53)
18                         /* OC3 link rate:  155520000 bps
19                            SONET overhead: /270*260 (9 section, 1 path)
20                            bits per cell:  /8/53
21                            max cell rate:  353207.547 cells/sec */
22 #define ATM_25_PCR      ((25600000/8-8000)/54)
23                         /* 25 Mbps ATM cell rate (59111) */
24 #define ATM_OC12_PCR    (622080000/1080*1040/8/53)
25                         /* OC12 link rate: 622080000 bps
26                            SONET overhead: /1080*1040
27                            bits per cell:  /8/53
28                            max cell rate:  1412830.188 cells/sec */
29 #define ATM_DS3_PCR     (8000*12)
30                         /* DS3: 12 cells in a 125 usec time slot */
31
32
33 #define __AAL_STAT_ITEMS \
34     __HANDLE_ITEM(tx);                  /* TX okay */ \
35     __HANDLE_ITEM(tx_err);              /* TX errors */ \
36     __HANDLE_ITEM(rx);                  /* RX okay */ \
37     __HANDLE_ITEM(rx_err);              /* RX errors */ \
38     __HANDLE_ITEM(rx_drop);             /* RX out of memory */
39
40 struct atm_aal_stats {
41 #define __HANDLE_ITEM(i) int i
42         __AAL_STAT_ITEMS
43 #undef __HANDLE_ITEM
44 };
45
46
47 struct atm_dev_stats {
48         struct atm_aal_stats aal0;
49         struct atm_aal_stats aal34;
50         struct atm_aal_stats aal5;
51 } __ATM_API_ALIGN;
52
53
54 #define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
55                                         /* get link rate */
56 #define ATM_GETNAMES    _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
57                                         /* get interface names (numbers) */
58 #define ATM_GETTYPE     _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
59                                         /* get interface type name */
60 #define ATM_GETESI      _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
61                                         /* get interface ESI */
62 #define ATM_GETADDR     _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
63                                         /* get itf's local ATM addr. list */
64 #define ATM_RSTADDR     _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
65                                         /* reset itf's ATM address list */
66 #define ATM_ADDADDR     _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
67                                         /* add a local ATM address */
68 #define ATM_DELADDR     _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
69                                         /* remove a local ATM address */
70 #define ATM_GETCIRANGE  _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
71                                         /* get connection identifier range */
72 #define ATM_SETCIRANGE  _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
73                                         /* set connection identifier range */
74 #define ATM_SETESI      _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
75                                         /* set interface ESI */
76 #define ATM_SETESIF     _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
77                                         /* force interface ESI */
78 #define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
79                                         /* register a LECS address */
80 #define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
81                                         /* unregister a LECS address */
82 #define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
83                                         /* retrieve LECS address(es) */
84
85 #define ATM_GETSTAT     _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
86                                         /* get AAL layer statistics */
87 #define ATM_GETSTATZ    _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
88                                         /* get AAL layer statistics and zero */
89 #define ATM_GETLOOP     _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
90                                         /* get loopback mode */
91 #define ATM_SETLOOP     _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
92                                         /* set loopback mode */
93 #define ATM_QUERYLOOP   _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
94                                         /* query supported loopback modes */
95 #define ATM_SETSC       _IOW('a',ATMIOC_SPECIAL+1,int)
96                                         /* enable or disable single-copy */
97 #define ATM_SETBACKEND  _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
98                                         /* set backend handler */
99 #define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
100                                         /* use backend to make new if */
101 #define ATM_ADDPARTY    _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
102                                         /* add party to p2mp call */
103 #ifdef CONFIG_COMPAT
104 /* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
105 #define COMPAT_ATM_ADDPARTY     _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
106 #endif
107 #define ATM_DROPPARTY   _IOW('a', ATMIOC_SPECIAL+5,int)
108                                         /* drop party from p2mp call */
109
110 /*
111  * These are backend handkers that can be set via the ATM_SETBACKEND call
112  * above.  In the future we may support dynamic loading of these - for now,
113  * they're just being used to share the ATMIOC_BACKEND ioctls
114  */
115 #define ATM_BACKEND_RAW         0       
116 #define ATM_BACKEND_PPP         1       /* PPPoATM - RFC2364 */
117 #define ATM_BACKEND_BR2684      2       /* Bridged RFC1483/2684 */
118
119 /* for ATM_GETTYPE */
120 #define ATM_ITFTYP_LEN  8       /* maximum length of interface type name */
121
122 /*
123  * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
124  */
125
126 /* Point of loopback                            CPU-->SAR-->PHY-->line--> ... */
127 #define __ATM_LM_NONE   0       /* no loop back     ^     ^     ^      ^      */
128 #define __ATM_LM_AAL    1       /* loop back PDUs --'     |     |      |      */
129 #define __ATM_LM_ATM    2       /* loop back ATM cells ---'     |      |      */
130 /* RESERVED             4       loop back on PHY side  ---'                   */
131 #define __ATM_LM_PHY    8       /* loop back bits (digital) ----'      |      */
132 #define __ATM_LM_ANALOG 16      /* loop back the analog signal --------'      */
133
134 /* Direction of loopback */
135 #define __ATM_LM_MKLOC(n)       ((n))       /* Local (i.e. loop TX to RX) */
136 #define __ATM_LM_MKRMT(n)       ((n) << 8)  /* Remote (i.e. loop RX to TX) */
137
138 #define __ATM_LM_XTLOC(n)       ((n) & 0xff)
139 #define __ATM_LM_XTRMT(n)       (((n) >> 8) & 0xff)
140
141 #define ATM_LM_NONE     0       /* no loopback */
142
143 #define ATM_LM_LOC_AAL  __ATM_LM_MKLOC(__ATM_LM_AAL)
144 #define ATM_LM_LOC_ATM  __ATM_LM_MKLOC(__ATM_LM_ATM)
145 #define ATM_LM_LOC_PHY  __ATM_LM_MKLOC(__ATM_LM_PHY)
146 #define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
147
148 #define ATM_LM_RMT_AAL  __ATM_LM_MKRMT(__ATM_LM_AAL)
149 #define ATM_LM_RMT_ATM  __ATM_LM_MKRMT(__ATM_LM_ATM)
150 #define ATM_LM_RMT_PHY  __ATM_LM_MKRMT(__ATM_LM_PHY)
151 #define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
152
153 /*
154  * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
155  * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
156  */
157
158
159 struct atm_iobuf {
160         int length;
161         void __user *buffer;
162 };
163
164 /* for ATM_GETCIRANGE / ATM_SETCIRANGE */
165
166 #define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
167  
168 struct atm_cirange {
169         signed char     vpi_bits;       /* 1..8, ATM_CI_MAX (-1) for maximum */
170         signed char     vci_bits;       /* 1..16, ATM_CI_MAX (-1) for maximum */
171 };
172
173 /* for ATM_SETSC; actually taken from the ATM_VF number space */
174
175 #define ATM_SC_RX       1024            /* enable RX single-copy */
176 #define ATM_SC_TX       2048            /* enable TX single-copy */
177
178 #define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
179                                   anyway */
180
181 /* MF: change_qos (Modify) flags */
182
183 #define ATM_MF_IMMED     1      /* Block until change is effective */
184 #define ATM_MF_INC_RSV   2      /* Change reservation on increase */
185 #define ATM_MF_INC_SHP   4      /* Change shaping on increase */
186 #define ATM_MF_DEC_RSV   8      /* Change reservation on decrease */
187 #define ATM_MF_DEC_SHP  16      /* Change shaping on decrease */
188 #define ATM_MF_BWD      32      /* Set the backward direction parameters */
189
190 #define ATM_MF_SET      (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
191                           ATM_MF_DEC_SHP | ATM_MF_BWD)
192
193 /*
194  * ATM_VS_* are used to express VC state in a human-friendly way.
195  */
196
197 #define ATM_VS_IDLE     0       /* VC is not used */
198 #define ATM_VS_CONNECTED 1      /* VC is connected */
199 #define ATM_VS_CLOSING  2       /* VC is closing */
200 #define ATM_VS_LISTEN   3       /* VC is listening for incoming setups */
201 #define ATM_VS_INUSE    4       /* VC is in use (registered with atmsigd) */
202 #define ATM_VS_BOUND    5       /* VC is bound */
203
204 #define ATM_VS2TXT_MAP \
205     "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
206
207 #define ATM_VF2TXT_MAP \
208     "ADDR",     "READY",        "PARTIAL",      "REGIS", \
209     "RELEASED", "HASQOS",       "LISTEN",       "META", \
210     "256",      "512",          "1024",         "2048", \
211     "SESSION",  "HASSAP",       "BOUND",        "CLOSE"
212
213
214
215 #endif /* _UAPILINUX_ATMDEV_H */