Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / include / scsi / scsi_device.h
1 #ifndef _SCSI_SCSI_DEVICE_H
2 #define _SCSI_SCSI_DEVICE_H
3
4 #include <linux/list.h>
5 #include <linux/spinlock.h>
6 #include <linux/workqueue.h>
7 #include <linux/blkdev.h>
8 #include <scsi/scsi.h>
9 #include <linux/atomic.h>
10
11 struct device;
12 struct request_queue;
13 struct scsi_cmnd;
14 struct scsi_lun;
15 struct scsi_sense_hdr;
16
17 struct scsi_mode_data {
18         __u32   length;
19         __u16   block_descriptor_length;
20         __u8    medium_type;
21         __u8    device_specific;
22         __u8    header_length;
23         __u8    longlba:1;
24 };
25
26 /*
27  * sdev state: If you alter this, you also need to alter scsi_sysfs.c
28  * (for the ascii descriptions) and the state model enforcer:
29  * scsi_lib:scsi_device_set_state().
30  */
31 enum scsi_device_state {
32         SDEV_CREATED = 1,       /* device created but not added to sysfs
33                                  * Only internal commands allowed (for inq) */
34         SDEV_RUNNING,           /* device properly configured
35                                  * All commands allowed */
36         SDEV_CANCEL,            /* beginning to delete device
37                                  * Only error handler commands allowed */
38         SDEV_DEL,               /* device deleted 
39                                  * no commands allowed */
40         SDEV_QUIESCE,           /* Device quiescent.  No block commands
41                                  * will be accepted, only specials (which
42                                  * originate in the mid-layer) */
43         SDEV_OFFLINE,           /* Device offlined (by error handling or
44                                  * user request */
45         SDEV_TRANSPORT_OFFLINE, /* Offlined by transport class error handler */
46         SDEV_BLOCK,             /* Device blocked by scsi lld.  No
47                                  * scsi commands from user or midlayer
48                                  * should be issued to the scsi
49                                  * lld. */
50         SDEV_CREATED_BLOCK,     /* same as above but for created devices */
51 };
52
53 enum scsi_device_event {
54         SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
55         SDEV_EVT_INQUIRY_CHANGE_REPORTED,               /* 3F 03  UA reported */
56         SDEV_EVT_CAPACITY_CHANGE_REPORTED,              /* 2A 09  UA reported */
57         SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,       /* 38 07  UA reported */
58         SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,        /* 2A 01  UA reported */
59         SDEV_EVT_LUN_CHANGE_REPORTED,                   /* 3F 0E  UA reported */
60
61         SDEV_EVT_FIRST          = SDEV_EVT_MEDIA_CHANGE,
62         SDEV_EVT_LAST           = SDEV_EVT_LUN_CHANGE_REPORTED,
63
64         SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
65 };
66
67 struct scsi_event {
68         enum scsi_device_event  evt_type;
69         struct list_head        node;
70
71         /* put union of data structures, for non-simple event types,
72          * here
73          */
74 };
75
76 struct scsi_device {
77         struct Scsi_Host *host;
78         struct request_queue *request_queue;
79
80         /* the next two are protected by the host->host_lock */
81         struct list_head    siblings;   /* list of all devices on this host */
82         struct list_head    same_target_siblings; /* just the devices sharing same target id */
83
84         atomic_t device_busy;           /* commands actually active on LLDD */
85         atomic_t device_blocked;        /* Device returned QUEUE_FULL. */
86
87         spinlock_t list_lock;
88         struct list_head cmd_list;      /* queue of in use SCSI Command structures */
89         struct list_head starved_entry;
90         struct scsi_cmnd *current_cmnd; /* currently active command */
91         unsigned short queue_depth;     /* How deep of a queue we want */
92         unsigned short max_queue_depth; /* max queue depth */
93         unsigned short last_queue_full_depth; /* These two are used by */
94         unsigned short last_queue_full_count; /* scsi_track_queue_full() */
95         unsigned long last_queue_full_time;     /* last queue full time */
96         unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
97 #define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
98
99         unsigned long last_queue_ramp_up;       /* last queue ramp up time */
100
101         unsigned int id, channel;
102         u64 lun;
103         unsigned int manufacturer;      /* Manufacturer of device, for using 
104                                          * vendor-specific cmd's */
105         unsigned sector_size;   /* size in bytes */
106
107         void *hostdata;         /* available to low-level driver */
108         char type;
109         char scsi_level;
110         char inq_periph_qual;   /* PQ from INQUIRY data */      
111         unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
112         unsigned char * inquiry;        /* INQUIRY response data */
113         const char * vendor;            /* [back_compat] point into 'inquiry' ... */
114         const char * model;             /* ... after scan; point to static string */
115         const char * rev;               /* ... "nullnullnullnull" before scan */
116
117 #define SCSI_VPD_PG_LEN                255
118         int vpd_pg83_len;
119         unsigned char *vpd_pg83;
120         int vpd_pg80_len;
121         unsigned char *vpd_pg80;
122         unsigned char current_tag;      /* current tag */
123         struct scsi_target      *sdev_target;   /* used only for single_lun */
124
125         unsigned int    sdev_bflags; /* black/white flags as also found in
126                                  * scsi_devinfo.[hc]. For now used only to
127                                  * pass settings from slave_alloc to scsi
128                                  * core. */
129         unsigned int eh_timeout; /* Error handling timeout */
130         unsigned removable:1;
131         unsigned changed:1;     /* Data invalid due to media change */
132         unsigned busy:1;        /* Used to prevent races */
133         unsigned lockable:1;    /* Able to prevent media removal */
134         unsigned locked:1;      /* Media removal disabled */
135         unsigned borken:1;      /* Tell the Seagate driver to be 
136                                  * painfully slow on this device */
137         unsigned disconnect:1;  /* can disconnect */
138         unsigned soft_reset:1;  /* Uses soft reset option */
139         unsigned sdtr:1;        /* Device supports SDTR messages */
140         unsigned wdtr:1;        /* Device supports WDTR messages */
141         unsigned ppr:1;         /* Device supports PPR messages */
142         unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
143         unsigned simple_tags:1; /* simple queue tag messages are enabled */
144         unsigned was_reset:1;   /* There was a bus reset on the bus for 
145                                  * this device */
146         unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
147                                      * because we did a bus reset. */
148         unsigned use_10_for_rw:1; /* first try 10-byte read / write */
149         unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
150         unsigned no_report_opcodes:1;   /* no REPORT SUPPORTED OPERATION CODES */
151         unsigned no_write_same:1;       /* no WRITE SAME command */
152         unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
153         unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
154         unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
155         unsigned skip_vpd_pages:1;      /* do not read VPD pages */
156         unsigned try_vpd_pages:1;       /* attempt to read VPD pages */
157         unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
158         unsigned no_start_on_add:1;     /* do not issue start on add */
159         unsigned allow_restart:1; /* issue START_UNIT in error handler */
160         unsigned manage_start_stop:1;   /* Let HLD (sd) manage start/stop */
161         unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
162         unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
163         unsigned select_no_atn:1;
164         unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
165         unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
166         unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
167         unsigned last_sector_bug:1;     /* do not use multisector accesses on
168                                            SD_LAST_BUGGY_SECTORS */
169         unsigned no_read_disc_info:1;   /* Avoid READ_DISC_INFO cmds */
170         unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
171         unsigned try_rc_10_first:1;     /* Try READ_CAPACACITY_10 first */
172         unsigned is_visible:1;  /* is the device visible in sysfs */
173         unsigned wce_default_on:1;      /* Cache is ON by default */
174         unsigned no_dif:1;      /* T10 PI (DIF) should be disabled */
175         unsigned broken_fua:1;          /* Don't set FUA bit */
176         unsigned lun_in_cdb:1;          /* Store LUN bits in CDB[1] */
177
178         atomic_t disk_events_disable_depth; /* disable depth for disk events */
179
180         DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
181         DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
182         struct list_head event_list;    /* asserted events */
183         struct work_struct event_work;
184
185         unsigned int max_device_blocked; /* what device_blocked counts down from  */
186 #define SCSI_DEFAULT_DEVICE_BLOCKED     3
187
188         atomic_t iorequest_cnt;
189         atomic_t iodone_cnt;
190         atomic_t ioerr_cnt;
191
192         struct device           sdev_gendev,
193                                 sdev_dev;
194
195         struct execute_work     ew; /* used to get process context on put */
196         struct work_struct      requeue_work;
197
198         struct scsi_dh_data     *scsi_dh_data;
199         enum scsi_device_state sdev_state;
200         unsigned long           sdev_data[0];
201 } __attribute__((aligned(sizeof(unsigned long))));
202
203 typedef void (*activate_complete)(void *, int);
204 struct scsi_device_handler {
205         /* Used by the infrastructure */
206         struct list_head list; /* list of scsi_device_handlers */
207
208         /* Filled by the hardware handler */
209         struct module *module;
210         const char *name;
211         int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
212         struct scsi_dh_data *(*attach)(struct scsi_device *);
213         void (*detach)(struct scsi_device *);
214         int (*activate)(struct scsi_device *, activate_complete, void *);
215         int (*prep_fn)(struct scsi_device *, struct request *);
216         int (*set_params)(struct scsi_device *, const char *);
217         bool (*match)(struct scsi_device *);
218 };
219
220 struct scsi_dh_data {
221         struct scsi_device_handler *scsi_dh;
222         struct scsi_device *sdev;
223         struct kref kref;
224 };
225
226 #define to_scsi_device(d)       \
227         container_of(d, struct scsi_device, sdev_gendev)
228 #define class_to_sdev(d)        \
229         container_of(d, struct scsi_device, sdev_dev)
230 #define transport_class_to_sdev(class_dev) \
231         to_scsi_device(class_dev->parent)
232
233 #define sdev_dbg(sdev, fmt, a...) \
234         dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
235
236 /*
237  * like scmd_printk, but the device name is passed in
238  * as a string pointer
239  */
240 __printf(4, 5) void
241 sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
242                 const char *, ...);
243
244 #define sdev_printk(l, sdev, fmt, a...)                         \
245         sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
246
247 __printf(3, 4) void
248 scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
249
250 #define scmd_dbg(scmd, fmt, a...)                                          \
251         do {                                                               \
252                 if ((scmd)->request->rq_disk)                              \
253                         sdev_dbg((scmd)->device, "[%s] " fmt,              \
254                                  (scmd)->request->rq_disk->disk_name, ##a);\
255                 else                                                       \
256                         sdev_dbg((scmd)->device, fmt, ##a);                \
257         } while (0)
258
259 enum scsi_target_state {
260         STARGET_CREATED = 1,
261         STARGET_RUNNING,
262         STARGET_DEL,
263 };
264
265 /*
266  * scsi_target: representation of a scsi target, for now, this is only
267  * used for single_lun devices. If no one has active IO to the target,
268  * starget_sdev_user is NULL, else it points to the active sdev.
269  */
270 struct scsi_target {
271         struct scsi_device      *starget_sdev_user;
272         struct list_head        siblings;
273         struct list_head        devices;
274         struct device           dev;
275         struct kref             reap_ref; /* last put renders target invisible */
276         unsigned int            channel;
277         unsigned int            id; /* target id ... replace
278                                      * scsi_device.id eventually */
279         unsigned int            create:1; /* signal that it needs to be added */
280         unsigned int            single_lun:1;   /* Indicates we should only
281                                                  * allow I/O to one of the luns
282                                                  * for the device at a time. */
283         unsigned int            pdt_1f_for_no_lun:1;    /* PDT = 0x1f
284                                                  * means no lun present. */
285         unsigned int            no_report_luns:1;       /* Don't use
286                                                  * REPORT LUNS for scanning. */
287         unsigned int            expecting_lun_change:1; /* A device has reported
288                                                  * a 3F/0E UA, other devices on
289                                                  * the same target will also. */
290         /* commands actually active on LLD. */
291         atomic_t                target_busy;
292         atomic_t                target_blocked;
293
294         /*
295          * LLDs should set this in the slave_alloc host template callout.
296          * If set to zero then there is not limit.
297          */
298         unsigned int            can_queue;
299         unsigned int            max_target_blocked;
300 #define SCSI_DEFAULT_TARGET_BLOCKED     3
301
302         char                    scsi_level;
303         enum scsi_target_state  state;
304         void                    *hostdata; /* available to low-level driver */
305         unsigned long           starget_data[0]; /* for the transport */
306         /* starget_data must be the last element!!!! */
307 } __attribute__((aligned(sizeof(unsigned long))));
308
309 #define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
310 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
311 {
312         return to_scsi_target(sdev->sdev_gendev.parent);
313 }
314 #define transport_class_to_starget(class_dev) \
315         to_scsi_target(class_dev->parent)
316
317 #define starget_printk(prefix, starget, fmt, a...)      \
318         dev_printk(prefix, &(starget)->dev, fmt, ##a)
319
320 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
321                 uint, uint, u64, void *hostdata);
322 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
323                            uint target, u64 lun);
324 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
325 extern void scsi_remove_device(struct scsi_device *);
326 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
327 void scsi_attach_vpd(struct scsi_device *sdev);
328
329 extern int scsi_device_get(struct scsi_device *);
330 extern void scsi_device_put(struct scsi_device *);
331 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
332                                               uint, uint, u64);
333 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
334                                                 uint, uint, u64);
335 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
336                                                         u64);
337 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
338                                                           u64);
339 extern void starget_for_each_device(struct scsi_target *, void *,
340                      void (*fn)(struct scsi_device *, void *));
341 extern void __starget_for_each_device(struct scsi_target *, void *,
342                                       void (*fn)(struct scsi_device *,
343                                                  void *));
344
345 /* only exposed to implement shost_for_each_device */
346 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
347                                                   struct scsi_device *);
348
349 /**
350  * shost_for_each_device - iterate over all devices of a host
351  * @sdev: the &struct scsi_device to use as a cursor
352  * @shost: the &struct scsi_host to iterate over
353  *
354  * Iterator that returns each device attached to @shost.  This loop
355  * takes a reference on each device and releases it at the end.  If
356  * you break out of the loop, you must call scsi_device_put(sdev).
357  */
358 #define shost_for_each_device(sdev, shost) \
359         for ((sdev) = __scsi_iterate_devices((shost), NULL); \
360              (sdev); \
361              (sdev) = __scsi_iterate_devices((shost), (sdev)))
362
363 /**
364  * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
365  * @sdev: the &struct scsi_device to use as a cursor
366  * @shost: the &struct scsi_host to iterate over
367  *
368  * Iterator that returns each device attached to @shost.  It does _not_
369  * take a reference on the scsi_device, so the whole loop must be
370  * protected by shost->host_lock.
371  *
372  * Note: The only reason to use this is because you need to access the
373  * device list in interrupt context.  Otherwise you really want to use
374  * shost_for_each_device instead.
375  */
376 #define __shost_for_each_device(sdev, shost) \
377         list_for_each_entry((sdev), &((shost)->__devices), siblings)
378
379 extern int scsi_change_queue_depth(struct scsi_device *, int);
380 extern int scsi_track_queue_full(struct scsi_device *, int);
381
382 extern int scsi_set_medium_removal(struct scsi_device *, char);
383
384 extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
385                            unsigned char *buffer, int len, int timeout,
386                            int retries, struct scsi_mode_data *data,
387                            struct scsi_sense_hdr *);
388 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
389                             int modepage, unsigned char *buffer, int len,
390                             int timeout, int retries,
391                             struct scsi_mode_data *data,
392                             struct scsi_sense_hdr *);
393 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
394                                 int retries, struct scsi_sense_hdr *sshdr);
395 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
396                              int buf_len);
397 extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
398                               unsigned int len, unsigned char opcode);
399 extern int scsi_device_set_state(struct scsi_device *sdev,
400                                  enum scsi_device_state state);
401 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
402                                           gfp_t gfpflags);
403 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
404 extern void sdev_evt_send_simple(struct scsi_device *sdev,
405                           enum scsi_device_event evt_type, gfp_t gfpflags);
406 extern int scsi_device_quiesce(struct scsi_device *sdev);
407 extern void scsi_device_resume(struct scsi_device *sdev);
408 extern void scsi_target_quiesce(struct scsi_target *);
409 extern void scsi_target_resume(struct scsi_target *);
410 extern void scsi_scan_target(struct device *parent, unsigned int channel,
411                              unsigned int id, u64 lun, int rescan);
412 extern void scsi_target_reap(struct scsi_target *);
413 extern void scsi_target_block(struct device *);
414 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
415 extern void scsi_remove_target(struct device *);
416 extern void int_to_scsilun(u64, struct scsi_lun *);
417 extern u64 scsilun_to_int(struct scsi_lun *);
418 extern const char *scsi_device_state_name(enum scsi_device_state);
419 extern int scsi_is_sdev_device(const struct device *);
420 extern int scsi_is_target_device(const struct device *);
421 extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
422                         int data_direction, void *buffer, unsigned bufflen,
423                         unsigned char *sense, int timeout, int retries,
424                         u64 flags, int *resid);
425 extern int scsi_execute_req_flags(struct scsi_device *sdev,
426         const unsigned char *cmd, int data_direction, void *buffer,
427         unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
428         int retries, int *resid, u64 flags);
429 static inline int scsi_execute_req(struct scsi_device *sdev,
430         const unsigned char *cmd, int data_direction, void *buffer,
431         unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
432         int retries, int *resid)
433 {
434         return scsi_execute_req_flags(sdev, cmd, data_direction, buffer,
435                 bufflen, sshdr, timeout, retries, resid, 0);
436 }
437 extern void sdev_disable_disk_events(struct scsi_device *sdev);
438 extern void sdev_enable_disk_events(struct scsi_device *sdev);
439
440 #ifdef CONFIG_PM
441 extern int scsi_autopm_get_device(struct scsi_device *);
442 extern void scsi_autopm_put_device(struct scsi_device *);
443 #else
444 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
445 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
446 #endif /* CONFIG_PM */
447
448 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
449 {
450         return device_reprobe(&sdev->sdev_gendev);
451 }
452
453 static inline unsigned int sdev_channel(struct scsi_device *sdev)
454 {
455         return sdev->channel;
456 }
457
458 static inline unsigned int sdev_id(struct scsi_device *sdev)
459 {
460         return sdev->id;
461 }
462
463 #define scmd_id(scmd) sdev_id((scmd)->device)
464 #define scmd_channel(scmd) sdev_channel((scmd)->device)
465
466 /*
467  * checks for positions of the SCSI state machine
468  */
469 static inline int scsi_device_online(struct scsi_device *sdev)
470 {
471         return (sdev->sdev_state != SDEV_OFFLINE &&
472                 sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
473                 sdev->sdev_state != SDEV_DEL);
474 }
475 static inline int scsi_device_blocked(struct scsi_device *sdev)
476 {
477         return sdev->sdev_state == SDEV_BLOCK ||
478                 sdev->sdev_state == SDEV_CREATED_BLOCK;
479 }
480 static inline int scsi_device_created(struct scsi_device *sdev)
481 {
482         return sdev->sdev_state == SDEV_CREATED ||
483                 sdev->sdev_state == SDEV_CREATED_BLOCK;
484 }
485
486 /* accessor functions for the SCSI parameters */
487 static inline int scsi_device_sync(struct scsi_device *sdev)
488 {
489         return sdev->sdtr;
490 }
491 static inline int scsi_device_wide(struct scsi_device *sdev)
492 {
493         return sdev->wdtr;
494 }
495 static inline int scsi_device_dt(struct scsi_device *sdev)
496 {
497         return sdev->ppr;
498 }
499 static inline int scsi_device_dt_only(struct scsi_device *sdev)
500 {
501         if (sdev->inquiry_len < 57)
502                 return 0;
503         return (sdev->inquiry[56] & 0x0c) == 0x04;
504 }
505 static inline int scsi_device_ius(struct scsi_device *sdev)
506 {
507         if (sdev->inquiry_len < 57)
508                 return 0;
509         return sdev->inquiry[56] & 0x01;
510 }
511 static inline int scsi_device_qas(struct scsi_device *sdev)
512 {
513         if (sdev->inquiry_len < 57)
514                 return 0;
515         return sdev->inquiry[56] & 0x02;
516 }
517 static inline int scsi_device_enclosure(struct scsi_device *sdev)
518 {
519         return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
520 }
521
522 static inline int scsi_device_protection(struct scsi_device *sdev)
523 {
524         if (sdev->no_dif)
525                 return 0;
526
527         return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
528 }
529
530 static inline int scsi_device_tpgs(struct scsi_device *sdev)
531 {
532         return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
533 }
534
535 #define MODULE_ALIAS_SCSI_DEVICE(type) \
536         MODULE_ALIAS("scsi:t-" __stringify(type) "*")
537 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
538
539 #endif /* _SCSI_SCSI_DEVICE_H */