Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / include / net / bond_options.h
1 /*
2  * drivers/net/bond/bond_options.h - bonding options
3  * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  */
10
11 #ifndef _NET_BOND_OPTIONS_H
12 #define _NET_BOND_OPTIONS_H
13
14 #define BOND_OPT_MAX_NAMELEN 32
15 #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
16 #define BOND_MODE_ALL_EX(x) (~(x))
17
18 /* Option flags:
19  * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
20  * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
21  * BOND_OPTFLAG_RAWVAL - the option parses the value itself
22  */
23 enum {
24         BOND_OPTFLAG_NOSLAVES   = BIT(0),
25         BOND_OPTFLAG_IFDOWN     = BIT(1),
26         BOND_OPTFLAG_RAWVAL     = BIT(2)
27 };
28
29 /* Value type flags:
30  * BOND_VALFLAG_DEFAULT - mark the value as default
31  * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
32  */
33 enum {
34         BOND_VALFLAG_DEFAULT    = BIT(0),
35         BOND_VALFLAG_MIN        = BIT(1),
36         BOND_VALFLAG_MAX        = BIT(2)
37 };
38
39 /* Option IDs, their bit positions correspond to their IDs */
40 enum {
41         BOND_OPT_MODE,
42         BOND_OPT_PACKETS_PER_SLAVE,
43         BOND_OPT_XMIT_HASH,
44         BOND_OPT_ARP_VALIDATE,
45         BOND_OPT_ARP_ALL_TARGETS,
46         BOND_OPT_FAIL_OVER_MAC,
47         BOND_OPT_ARP_INTERVAL,
48         BOND_OPT_ARP_TARGETS,
49         BOND_OPT_DOWNDELAY,
50         BOND_OPT_UPDELAY,
51         BOND_OPT_LACP_RATE,
52         BOND_OPT_MINLINKS,
53         BOND_OPT_AD_SELECT,
54         BOND_OPT_NUM_PEER_NOTIF,
55         BOND_OPT_MIIMON,
56         BOND_OPT_PRIMARY,
57         BOND_OPT_PRIMARY_RESELECT,
58         BOND_OPT_USE_CARRIER,
59         BOND_OPT_ACTIVE_SLAVE,
60         BOND_OPT_QUEUE_ID,
61         BOND_OPT_ALL_SLAVES_ACTIVE,
62         BOND_OPT_RESEND_IGMP,
63         BOND_OPT_LP_INTERVAL,
64         BOND_OPT_SLAVES,
65         BOND_OPT_TLB_DYNAMIC_LB,
66         BOND_OPT_LAST
67 };
68
69 /* This structure is used for storing option values and for passing option
70  * values when changing an option. The logic when used as an arg is as follows:
71  * - if string != NULL -> parse it, if the opt is RAW type then return it, else
72  *   return the parse result
73  * - if string == NULL -> parse value
74  */
75 struct bond_opt_value {
76         char *string;
77         u64 value;
78         u32 flags;
79 };
80
81 struct bonding;
82
83 struct bond_option {
84         int id;
85         const char *name;
86         const char *desc;
87         u32 flags;
88
89         /* unsuppmodes is used to denote modes in which the option isn't
90          * supported.
91          */
92         unsigned long unsuppmodes;
93         /* supported values which this option can have, can be a subset of
94          * BOND_OPTVAL_RANGE's value range
95          */
96         const struct bond_opt_value *values;
97
98         int (*set)(struct bonding *bond, const struct bond_opt_value *val);
99 };
100
101 int __bond_opt_set(struct bonding *bond, unsigned int option,
102                    struct bond_opt_value *val);
103 int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
104
105 const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
106                                             struct bond_opt_value *val);
107 const struct bond_option *bond_opt_get(unsigned int option);
108 const struct bond_option *bond_opt_get_by_name(const char *name);
109 const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
110
111 /* This helper is used to initialize a bond_opt_value structure for parameter
112  * passing. There should be either a valid string or value, but not both.
113  * When value is ULLONG_MAX then string will be used.
114  */
115 static inline void __bond_opt_init(struct bond_opt_value *optval,
116                                    char *string, u64 value)
117 {
118         memset(optval, 0, sizeof(*optval));
119         optval->value = ULLONG_MAX;
120         if (value == ULLONG_MAX)
121                 optval->string = string;
122         else
123                 optval->value = value;
124 }
125 #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
126 #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
127
128 void bond_option_arp_ip_targets_clear(struct bonding *bond);
129
130 #endif /* _NET_BOND_OPTIONS_H */