Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / include / linux / usb / storage.h
1 #ifndef __LINUX_USB_STORAGE_H
2 #define __LINUX_USB_STORAGE_H
3
4 /*
5  * linux/usb/storage.h
6  *
7  * Copyright Matthew Wilcox for Intel Corp, 2010
8  *
9  * This file contains definitions taken from the
10  * USB Mass Storage Class Specification Overview
11  *
12  * Distributed under the terms of the GNU GPL, version two.
13  */
14
15 /* Storage subclass codes */
16
17 #define USB_SC_RBC      0x01            /* Typically, flash devices */
18 #define USB_SC_8020     0x02            /* CD-ROM */
19 #define USB_SC_QIC      0x03            /* QIC-157 Tapes */
20 #define USB_SC_UFI      0x04            /* Floppy */
21 #define USB_SC_8070     0x05            /* Removable media */
22 #define USB_SC_SCSI     0x06            /* Transparent */
23 #define USB_SC_LOCKABLE 0x07            /* Password-protected */
24
25 #define USB_SC_ISD200   0xf0            /* ISD200 ATA */
26 #define USB_SC_CYP_ATACB        0xf1    /* Cypress ATACB */
27 #define USB_SC_DEVICE   0xff            /* Use device's value */
28
29 /* Storage protocol codes */
30
31 #define USB_PR_CBI      0x00            /* Control/Bulk/Interrupt */
32 #define USB_PR_CB       0x01            /* Control/Bulk w/o interrupt */
33 #define USB_PR_BULK     0x50            /* bulk only */
34 #define USB_PR_UAS      0x62            /* USB Attached SCSI */
35
36 #define USB_PR_USBAT    0x80            /* SCM-ATAPI bridge */
37 #define USB_PR_EUSB_SDDR09      0x81    /* SCM-SCSI bridge for SDDR-09 */
38 #define USB_PR_SDDR55   0x82            /* SDDR-55 (made up) */
39 #define USB_PR_DPCM_USB 0xf0            /* Combination CB/SDDR09 */
40 #define USB_PR_FREECOM  0xf1            /* Freecom */
41 #define USB_PR_DATAFAB  0xf2            /* Datafab chipsets */
42 #define USB_PR_JUMPSHOT 0xf3            /* Lexar Jumpshot */
43 #define USB_PR_ALAUDA   0xf4            /* Alauda chipsets */
44 #define USB_PR_KARMA    0xf5            /* Rio Karma */
45
46 #define USB_PR_DEVICE   0xff            /* Use device's value */
47
48  /*
49   * Bulk only data structures
50   */
51
52 /* command block wrapper */
53 struct bulk_cb_wrap {
54         __le32  Signature;              /* contains 'USBC' */
55         __u32   Tag;                    /* unique per command id */
56         __le32  DataTransferLength;     /* size of data */
57         __u8    Flags;                  /* direction in bit 0 */
58         __u8    Lun;                    /* LUN normally 0 */
59         __u8    Length;                 /* of of the CDB */
60         __u8    CDB[16];                /* max command */
61 };
62
63 #define US_BULK_CB_WRAP_LEN     31
64 #define US_BULK_CB_SIGN         0x43425355      /*spells out USBC */
65 #define US_BULK_FLAG_IN         (1 << 7)
66 #define US_BULK_FLAG_OUT        0
67
68 /* command status wrapper */
69 struct bulk_cs_wrap {
70         __le32  Signature;      /* should = 'USBS' */
71         __u32   Tag;            /* same as original command */
72         __le32  Residue;        /* amount not transferred */
73         __u8    Status;         /* see below */
74 };
75
76 #define US_BULK_CS_WRAP_LEN     13
77 #define US_BULK_CS_SIGN         0x53425355      /* spells out 'USBS' */
78 #define US_BULK_STAT_OK         0
79 #define US_BULK_STAT_FAIL       1
80 #define US_BULK_STAT_PHASE      2
81
82 /* bulk-only class specific requests */
83 #define US_BULK_RESET_REQUEST   0xff
84 #define US_BULK_GET_MAX_LUN     0xfe
85
86 #endif