These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / include / linux / usb / msm_hsusb_hw.h
1 /*
2  * Copyright (C) 2007 Google, Inc.
3  * Author: Brian Swetland <swetland@google.com>
4  *
5  * This software is licensed under the terms of the GNU General Public
6  * License version 2, as published by the Free Software Foundation, and
7  * may be copied, distributed, and modified under those terms.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  */
15
16 #ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
17 #define __LINUX_USB_GADGET_MSM72K_UDC_H__
18
19 /* USB phy selector - in TCSR address range */
20 #define USB2_PHY_SEL         0xfd4ab000
21
22 #define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
23 #define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
24 #define USB_GENCONFIG_2      (MSM_USB_BASE + 0x00a0)
25
26 #define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
27
28 #define USB_USBCMD           (MSM_USB_BASE + 0x0140)
29 #define USB_PORTSC           (MSM_USB_BASE + 0x0184)
30 #define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
31 #define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
32 #define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
33 #define USB_PHY_CTRL2        (MSM_USB_BASE + 0x0278)
34
35 #define GENCONFIG_2_SESS_VLD_CTRL_EN    BIT(7)
36 #define USBCMD_SESS_VLD_CTRL            BIT(25)
37
38 #define USBCMD_RESET   2
39 #define USB_USBINTR          (MSM_USB_BASE + 0x0148)
40
41 #define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
42 #define PORTSC_PTS_MASK        (3 << 30)
43 #define PORTSC_PTS_ULPI        (2 << 30)
44 #define PORTSC_PTS_SERIAL      (3 << 30)
45
46 #define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
47 #define ULPI_RUN              (1 << 30)
48 #define ULPI_WRITE            (1 << 29)
49 #define ULPI_READ             (0 << 29)
50 #define ULPI_ADDR(n)          (((n) & 255) << 16)
51 #define ULPI_DATA(n)          ((n) & 255)
52 #define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
53
54 /* synopsys 28nm phy registers */
55 #define ULPI_PWR_CLK_MNG_REG    0x88
56 #define OTG_COMP_DISABLE        BIT(0)
57
58 #define ULPI_MISC_A                     0x96
59 #define ULPI_MISC_A_VBUSVLDEXTSEL       BIT(1)
60 #define ULPI_MISC_A_VBUSVLDEXT          BIT(0)
61
62 #define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
63 #define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
64 #define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
65 #define PHY_POR_ASSERT          (1 << 0) /* USB2 28nm PHY POR ASSERT */
66
67 /* OTG definitions */
68 #define OTGSC_INTSTS_MASK       (0x7f << 16)
69 #define OTGSC_ID                (1 << 8)
70 #define OTGSC_BSV               (1 << 11)
71 #define OTGSC_IDIS              (1 << 16)
72 #define OTGSC_BSVIS             (1 << 19)
73 #define OTGSC_IDIE              (1 << 24)
74 #define OTGSC_BSVIE             (1 << 27)
75
76 #endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */