These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / include / linux / suspend.h
1 #ifndef _LINUX_SUSPEND_H
2 #define _LINUX_SUSPEND_H
3
4 #include <linux/swap.h>
5 #include <linux/notifier.h>
6 #include <linux/init.h>
7 #include <linux/pm.h>
8 #include <linux/mm.h>
9 #include <linux/freezer.h>
10 #include <asm/errno.h>
11
12 #ifdef CONFIG_VT
13 extern void pm_set_vt_switch(int);
14 #else
15 static inline void pm_set_vt_switch(int do_switch)
16 {
17 }
18 #endif
19
20 #ifdef CONFIG_VT_CONSOLE_SLEEP
21 extern int pm_prepare_console(void);
22 extern void pm_restore_console(void);
23 #else
24 static inline int pm_prepare_console(void)
25 {
26         return 0;
27 }
28
29 static inline void pm_restore_console(void)
30 {
31 }
32 #endif
33
34 typedef int __bitwise suspend_state_t;
35
36 #define PM_SUSPEND_ON           ((__force suspend_state_t) 0)
37 #define PM_SUSPEND_FREEZE       ((__force suspend_state_t) 1)
38 #define PM_SUSPEND_STANDBY      ((__force suspend_state_t) 2)
39 #define PM_SUSPEND_MEM          ((__force suspend_state_t) 3)
40 #define PM_SUSPEND_MIN          PM_SUSPEND_FREEZE
41 #define PM_SUSPEND_MAX          ((__force suspend_state_t) 4)
42
43 enum suspend_stat_step {
44         SUSPEND_FREEZE = 1,
45         SUSPEND_PREPARE,
46         SUSPEND_SUSPEND,
47         SUSPEND_SUSPEND_LATE,
48         SUSPEND_SUSPEND_NOIRQ,
49         SUSPEND_RESUME_NOIRQ,
50         SUSPEND_RESUME_EARLY,
51         SUSPEND_RESUME
52 };
53
54 struct suspend_stats {
55         int     success;
56         int     fail;
57         int     failed_freeze;
58         int     failed_prepare;
59         int     failed_suspend;
60         int     failed_suspend_late;
61         int     failed_suspend_noirq;
62         int     failed_resume;
63         int     failed_resume_early;
64         int     failed_resume_noirq;
65 #define REC_FAILED_NUM  2
66         int     last_failed_dev;
67         char    failed_devs[REC_FAILED_NUM][40];
68         int     last_failed_errno;
69         int     errno[REC_FAILED_NUM];
70         int     last_failed_step;
71         enum suspend_stat_step  failed_steps[REC_FAILED_NUM];
72 };
73
74 extern struct suspend_stats suspend_stats;
75
76 static inline void dpm_save_failed_dev(const char *name)
77 {
78         strlcpy(suspend_stats.failed_devs[suspend_stats.last_failed_dev],
79                 name,
80                 sizeof(suspend_stats.failed_devs[0]));
81         suspend_stats.last_failed_dev++;
82         suspend_stats.last_failed_dev %= REC_FAILED_NUM;
83 }
84
85 static inline void dpm_save_failed_errno(int err)
86 {
87         suspend_stats.errno[suspend_stats.last_failed_errno] = err;
88         suspend_stats.last_failed_errno++;
89         suspend_stats.last_failed_errno %= REC_FAILED_NUM;
90 }
91
92 static inline void dpm_save_failed_step(enum suspend_stat_step step)
93 {
94         suspend_stats.failed_steps[suspend_stats.last_failed_step] = step;
95         suspend_stats.last_failed_step++;
96         suspend_stats.last_failed_step %= REC_FAILED_NUM;
97 }
98
99 /**
100  * struct platform_suspend_ops - Callbacks for managing platform dependent
101  *      system sleep states.
102  *
103  * @valid: Callback to determine if given system sleep state is supported by
104  *      the platform.
105  *      Valid (ie. supported) states are advertised in /sys/power/state.  Note
106  *      that it still may be impossible to enter given system sleep state if the
107  *      conditions aren't right.
108  *      There is the %suspend_valid_only_mem function available that can be
109  *      assigned to this if the platform only supports mem sleep.
110  *
111  * @begin: Initialise a transition to given system sleep state.
112  *      @begin() is executed right prior to suspending devices.  The information
113  *      conveyed to the platform code by @begin() should be disregarded by it as
114  *      soon as @end() is executed.  If @begin() fails (ie. returns nonzero),
115  *      @prepare(), @enter() and @finish() will not be called by the PM core.
116  *      This callback is optional.  However, if it is implemented, the argument
117  *      passed to @enter() is redundant and should be ignored.
118  *
119  * @prepare: Prepare the platform for entering the system sleep state indicated
120  *      by @begin().
121  *      @prepare() is called right after devices have been suspended (ie. the
122  *      appropriate .suspend() method has been executed for each device) and
123  *      before device drivers' late suspend callbacks are executed.  It returns
124  *      0 on success or a negative error code otherwise, in which case the
125  *      system cannot enter the desired sleep state (@prepare_late(), @enter(),
126  *      and @wake() will not be called in that case).
127  *
128  * @prepare_late: Finish preparing the platform for entering the system sleep
129  *      state indicated by @begin().
130  *      @prepare_late is called before disabling nonboot CPUs and after
131  *      device drivers' late suspend callbacks have been executed.  It returns
132  *      0 on success or a negative error code otherwise, in which case the
133  *      system cannot enter the desired sleep state (@enter() will not be
134  *      executed).
135  *
136  * @enter: Enter the system sleep state indicated by @begin() or represented by
137  *      the argument if @begin() is not implemented.
138  *      This callback is mandatory.  It returns 0 on success or a negative
139  *      error code otherwise, in which case the system cannot enter the desired
140  *      sleep state.
141  *
142  * @wake: Called when the system has just left a sleep state, right after
143  *      the nonboot CPUs have been enabled and before device drivers' early
144  *      resume callbacks are executed.
145  *      This callback is optional, but should be implemented by the platforms
146  *      that implement @prepare_late().  If implemented, it is always called
147  *      after @prepare_late and @enter(), even if one of them fails.
148  *
149  * @finish: Finish wake-up of the platform.
150  *      @finish is called right prior to calling device drivers' regular suspend
151  *      callbacks.
152  *      This callback is optional, but should be implemented by the platforms
153  *      that implement @prepare().  If implemented, it is always called after
154  *      @enter() and @wake(), even if any of them fails.  It is executed after
155  *      a failing @prepare.
156  *
157  * @suspend_again: Returns whether the system should suspend again (true) or
158  *      not (false). If the platform wants to poll sensors or execute some
159  *      code during suspended without invoking userspace and most of devices,
160  *      suspend_again callback is the place assuming that periodic-wakeup or
161  *      alarm-wakeup is already setup. This allows to execute some codes while
162  *      being kept suspended in the view of userland and devices.
163  *
164  * @end: Called by the PM core right after resuming devices, to indicate to
165  *      the platform that the system has returned to the working state or
166  *      the transition to the sleep state has been aborted.
167  *      This callback is optional, but should be implemented by the platforms
168  *      that implement @begin().  Accordingly, platforms implementing @begin()
169  *      should also provide a @end() which cleans up transitions aborted before
170  *      @enter().
171  *
172  * @recover: Recover the platform from a suspend failure.
173  *      Called by the PM core if the suspending of devices fails.
174  *      This callback is optional and should only be implemented by platforms
175  *      which require special recovery actions in that situation.
176  */
177 struct platform_suspend_ops {
178         int (*valid)(suspend_state_t state);
179         int (*begin)(suspend_state_t state);
180         int (*prepare)(void);
181         int (*prepare_late)(void);
182         int (*enter)(suspend_state_t state);
183         void (*wake)(void);
184         void (*finish)(void);
185         bool (*suspend_again)(void);
186         void (*end)(void);
187         void (*recover)(void);
188 };
189
190 struct platform_freeze_ops {
191         int (*begin)(void);
192         int (*prepare)(void);
193         void (*restore)(void);
194         void (*end)(void);
195 };
196
197 #if defined(CONFIG_SUSPEND) || defined(CONFIG_HIBERNATION)
198 extern bool pm_in_action;
199 #else
200 # define pm_in_action false
201 #endif
202
203 #ifdef CONFIG_SUSPEND
204 /**
205  * suspend_set_ops - set platform dependent suspend operations
206  * @ops: The new suspend operations to set.
207  */
208 extern void suspend_set_ops(const struct platform_suspend_ops *ops);
209 extern int suspend_valid_only_mem(suspend_state_t state);
210
211 extern unsigned int pm_suspend_global_flags;
212
213 #define PM_SUSPEND_FLAG_FW_SUSPEND      (1 << 0)
214 #define PM_SUSPEND_FLAG_FW_RESUME       (1 << 1)
215
216 static inline void pm_suspend_clear_flags(void)
217 {
218         pm_suspend_global_flags = 0;
219 }
220
221 static inline void pm_set_suspend_via_firmware(void)
222 {
223         pm_suspend_global_flags |= PM_SUSPEND_FLAG_FW_SUSPEND;
224 }
225
226 static inline void pm_set_resume_via_firmware(void)
227 {
228         pm_suspend_global_flags |= PM_SUSPEND_FLAG_FW_RESUME;
229 }
230
231 static inline bool pm_suspend_via_firmware(void)
232 {
233         return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_FW_SUSPEND);
234 }
235
236 static inline bool pm_resume_via_firmware(void)
237 {
238         return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_FW_RESUME);
239 }
240
241 /* Suspend-to-idle state machnine. */
242 enum freeze_state {
243         FREEZE_STATE_NONE,      /* Not suspended/suspending. */
244         FREEZE_STATE_ENTER,     /* Enter suspend-to-idle. */
245         FREEZE_STATE_WAKE,      /* Wake up from suspend-to-idle. */
246 };
247
248 extern enum freeze_state __read_mostly suspend_freeze_state;
249
250 static inline bool idle_should_freeze(void)
251 {
252         return unlikely(suspend_freeze_state == FREEZE_STATE_ENTER);
253 }
254
255 extern void freeze_set_ops(const struct platform_freeze_ops *ops);
256 extern void freeze_wake(void);
257
258 /**
259  * arch_suspend_disable_irqs - disable IRQs for suspend
260  *
261  * Disables IRQs (in the default case). This is a weak symbol in the common
262  * code and thus allows architectures to override it if more needs to be
263  * done. Not called for suspend to disk.
264  */
265 extern void arch_suspend_disable_irqs(void);
266
267 /**
268  * arch_suspend_enable_irqs - enable IRQs after suspend
269  *
270  * Enables IRQs (in the default case). This is a weak symbol in the common
271  * code and thus allows architectures to override it if more needs to be
272  * done. Not called for suspend to disk.
273  */
274 extern void arch_suspend_enable_irqs(void);
275
276 extern int pm_suspend(suspend_state_t state);
277 #else /* !CONFIG_SUSPEND */
278 #define suspend_valid_only_mem  NULL
279
280 static inline void pm_suspend_clear_flags(void) {}
281 static inline void pm_set_suspend_via_firmware(void) {}
282 static inline void pm_set_resume_via_firmware(void) {}
283 static inline bool pm_suspend_via_firmware(void) { return false; }
284 static inline bool pm_resume_via_firmware(void) { return false; }
285
286 static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}
287 static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
288 static inline bool idle_should_freeze(void) { return false; }
289 static inline void freeze_set_ops(const struct platform_freeze_ops *ops) {}
290 static inline void freeze_wake(void) {}
291 #endif /* !CONFIG_SUSPEND */
292
293 /* struct pbe is used for creating lists of pages that should be restored
294  * atomically during the resume from disk, because the page frames they have
295  * occupied before the suspend are in use.
296  */
297 struct pbe {
298         void *address;          /* address of the copy */
299         void *orig_address;     /* original address of a page */
300         struct pbe *next;
301 };
302
303 /* mm/page_alloc.c */
304 extern void mark_free_pages(struct zone *zone);
305
306 /**
307  * struct platform_hibernation_ops - hibernation platform support
308  *
309  * The methods in this structure allow a platform to carry out special
310  * operations required by it during a hibernation transition.
311  *
312  * All the methods below, except for @recover(), must be implemented.
313  *
314  * @begin: Tell the platform driver that we're starting hibernation.
315  *      Called right after shrinking memory and before freezing devices.
316  *
317  * @end: Called by the PM core right after resuming devices, to indicate to
318  *      the platform that the system has returned to the working state.
319  *
320  * @pre_snapshot: Prepare the platform for creating the hibernation image.
321  *      Called right after devices have been frozen and before the nonboot
322  *      CPUs are disabled (runs with IRQs on).
323  *
324  * @finish: Restore the previous state of the platform after the hibernation
325  *      image has been created *or* put the platform into the normal operation
326  *      mode after the hibernation (the same method is executed in both cases).
327  *      Called right after the nonboot CPUs have been enabled and before
328  *      thawing devices (runs with IRQs on).
329  *
330  * @prepare: Prepare the platform for entering the low power state.
331  *      Called right after the hibernation image has been saved and before
332  *      devices are prepared for entering the low power state.
333  *
334  * @enter: Put the system into the low power state after the hibernation image
335  *      has been saved to disk.
336  *      Called after the nonboot CPUs have been disabled and all of the low
337  *      level devices have been shut down (runs with IRQs off).
338  *
339  * @leave: Perform the first stage of the cleanup after the system sleep state
340  *      indicated by @set_target() has been left.
341  *      Called right after the control has been passed from the boot kernel to
342  *      the image kernel, before the nonboot CPUs are enabled and before devices
343  *      are resumed.  Executed with interrupts disabled.
344  *
345  * @pre_restore: Prepare system for the restoration from a hibernation image.
346  *      Called right after devices have been frozen and before the nonboot
347  *      CPUs are disabled (runs with IRQs on).
348  *
349  * @restore_cleanup: Clean up after a failing image restoration.
350  *      Called right after the nonboot CPUs have been enabled and before
351  *      thawing devices (runs with IRQs on).
352  *
353  * @recover: Recover the platform from a failure to suspend devices.
354  *      Called by the PM core if the suspending of devices during hibernation
355  *      fails.  This callback is optional and should only be implemented by
356  *      platforms which require special recovery actions in that situation.
357  */
358 struct platform_hibernation_ops {
359         int (*begin)(void);
360         void (*end)(void);
361         int (*pre_snapshot)(void);
362         void (*finish)(void);
363         int (*prepare)(void);
364         int (*enter)(void);
365         void (*leave)(void);
366         int (*pre_restore)(void);
367         void (*restore_cleanup)(void);
368         void (*recover)(void);
369 };
370
371 #ifdef CONFIG_HIBERNATION
372 /* kernel/power/snapshot.c */
373 extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
374 static inline void __init register_nosave_region(unsigned long b, unsigned long e)
375 {
376         __register_nosave_region(b, e, 0);
377 }
378 static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
379 {
380         __register_nosave_region(b, e, 1);
381 }
382 extern int swsusp_page_is_forbidden(struct page *);
383 extern void swsusp_set_page_free(struct page *);
384 extern void swsusp_unset_page_free(struct page *);
385 extern unsigned long get_safe_page(gfp_t gfp_mask);
386
387 extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
388 extern int hibernate(void);
389 extern bool system_entering_hibernation(void);
390 extern bool hibernation_available(void);
391 asmlinkage int swsusp_save(void);
392 extern struct pbe *restore_pblist;
393 #else /* CONFIG_HIBERNATION */
394 static inline void register_nosave_region(unsigned long b, unsigned long e) {}
395 static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
396 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
397 static inline void swsusp_set_page_free(struct page *p) {}
398 static inline void swsusp_unset_page_free(struct page *p) {}
399
400 static inline void hibernation_set_ops(const struct platform_hibernation_ops *ops) {}
401 static inline int hibernate(void) { return -ENOSYS; }
402 static inline bool system_entering_hibernation(void) { return false; }
403 static inline bool hibernation_available(void) { return false; }
404 #endif /* CONFIG_HIBERNATION */
405
406 /* Hibernation and suspend events */
407 #define PM_HIBERNATION_PREPARE  0x0001 /* Going to hibernate */
408 #define PM_POST_HIBERNATION     0x0002 /* Hibernation finished */
409 #define PM_SUSPEND_PREPARE      0x0003 /* Going to suspend the system */
410 #define PM_POST_SUSPEND         0x0004 /* Suspend finished */
411 #define PM_RESTORE_PREPARE      0x0005 /* Going to restore a saved image */
412 #define PM_POST_RESTORE         0x0006 /* Restore failed */
413
414 extern struct mutex pm_mutex;
415
416 #ifdef CONFIG_PM_SLEEP
417 void save_processor_state(void);
418 void restore_processor_state(void);
419
420 /* kernel/power/main.c */
421 extern int register_pm_notifier(struct notifier_block *nb);
422 extern int unregister_pm_notifier(struct notifier_block *nb);
423
424 #define pm_notifier(fn, pri) {                          \
425         static struct notifier_block fn##_nb =                  \
426                 { .notifier_call = fn, .priority = pri };       \
427         register_pm_notifier(&fn##_nb);                 \
428 }
429
430 /* drivers/base/power/wakeup.c */
431 extern bool events_check_enabled;
432 extern unsigned int pm_wakeup_irq;
433
434 extern bool pm_wakeup_pending(void);
435 extern void pm_system_wakeup(void);
436 extern void pm_wakeup_clear(void);
437 extern void pm_system_irq_wakeup(unsigned int irq_number);
438 extern bool pm_get_wakeup_count(unsigned int *count, bool block);
439 extern bool pm_save_wakeup_count(unsigned int count);
440 extern void pm_wakep_autosleep_enabled(bool set);
441 extern void pm_print_active_wakeup_sources(void);
442
443 static inline void lock_system_sleep(void)
444 {
445         current->flags |= PF_FREEZER_SKIP;
446         mutex_lock(&pm_mutex);
447 }
448
449 static inline void unlock_system_sleep(void)
450 {
451         /*
452          * Don't use freezer_count() because we don't want the call to
453          * try_to_freeze() here.
454          *
455          * Reason:
456          * Fundamentally, we just don't need it, because freezing condition
457          * doesn't come into effect until we release the pm_mutex lock,
458          * since the freezer always works with pm_mutex held.
459          *
460          * More importantly, in the case of hibernation,
461          * unlock_system_sleep() gets called in snapshot_read() and
462          * snapshot_write() when the freezing condition is still in effect.
463          * Which means, if we use try_to_freeze() here, it would make them
464          * enter the refrigerator, thus causing hibernation to lockup.
465          */
466         current->flags &= ~PF_FREEZER_SKIP;
467         mutex_unlock(&pm_mutex);
468 }
469
470 #else /* !CONFIG_PM_SLEEP */
471
472 static inline int register_pm_notifier(struct notifier_block *nb)
473 {
474         return 0;
475 }
476
477 static inline int unregister_pm_notifier(struct notifier_block *nb)
478 {
479         return 0;
480 }
481
482 #define pm_notifier(fn, pri)    do { (void)(fn); } while (0)
483
484 static inline bool pm_wakeup_pending(void) { return false; }
485 static inline void pm_system_wakeup(void) {}
486 static inline void pm_wakeup_clear(void) {}
487 static inline void pm_system_irq_wakeup(unsigned int irq_number) {}
488
489 static inline void lock_system_sleep(void) {}
490 static inline void unlock_system_sleep(void) {}
491
492 #endif /* !CONFIG_PM_SLEEP */
493
494 #ifdef CONFIG_PM_SLEEP_DEBUG
495 extern bool pm_print_times_enabled;
496 #else
497 #define pm_print_times_enabled  (false)
498 #endif
499
500 #ifdef CONFIG_PM_AUTOSLEEP
501
502 /* kernel/power/autosleep.c */
503 void queue_up_suspend_work(void);
504
505 #else /* !CONFIG_PM_AUTOSLEEP */
506
507 static inline void queue_up_suspend_work(void) {}
508
509 #endif /* !CONFIG_PM_AUTOSLEEP */
510
511 #ifdef CONFIG_ARCH_SAVE_PAGE_KEYS
512 /*
513  * The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture
514  * to save/restore additional information to/from the array of page
515  * frame numbers in the hibernation image. For s390 this is used to
516  * save and restore the storage key for each page that is included
517  * in the hibernation image.
518  */
519 unsigned long page_key_additional_pages(unsigned long pages);
520 int page_key_alloc(unsigned long pages);
521 void page_key_free(void);
522 void page_key_read(unsigned long *pfn);
523 void page_key_memorize(unsigned long *pfn);
524 void page_key_write(void *address);
525
526 #else /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
527
528 static inline unsigned long page_key_additional_pages(unsigned long pages)
529 {
530         return 0;
531 }
532
533 static inline int  page_key_alloc(unsigned long pages)
534 {
535         return 0;
536 }
537
538 static inline void page_key_free(void) {}
539 static inline void page_key_read(unsigned long *pfn) {}
540 static inline void page_key_memorize(unsigned long *pfn) {}
541 static inline void page_key_write(void *address) {}
542
543 #endif /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
544
545 #endif /* _LINUX_SUSPEND_H */