kernel/include/linux/mfd/samsung/core.h

   1 /*
   2  * core.h
   3  *
   4  * copyright (c) 2011 Samsung Electronics Co., Ltd
   5  *              http://www.samsung.com
   6  *
   7  *  This program is free software; you can redistribute  it and/or modify it
   8  *  under  the terms of  the GNU General  Public License as published by the
   9  *  Free Software Foundation;  either version 2 of the  License, or (at your
  10  *  option) any later version.
  11  *
  12  */
  13
  14 #ifndef __LINUX_MFD_SEC_CORE_H
  15 #define __LINUX_MFD_SEC_CORE_H
  16
  17 /* Macros to represent minimum voltages for LDO/BUCK */
  18 #define MIN_3000_MV             3000000
  19 #define MIN_2500_MV             2500000
  20 #define MIN_2000_MV             2000000
  21 #define MIN_1800_MV             1800000
  22 #define MIN_1500_MV             1500000
  23 #define MIN_1400_MV             1400000
  24 #define MIN_1000_MV             1000000
  25
  26 #define MIN_900_MV              900000
  27 #define MIN_850_MV              850000
  28 #define MIN_800_MV              800000
  29 #define MIN_750_MV              750000
  30 #define MIN_600_MV              600000
  31 #define MIN_500_MV              500000
  32
  33 /* Macros to represent steps for LDO/BUCK */
  34 #define STEP_50_MV              50000
  35 #define STEP_25_MV              25000
  36 #define STEP_12_5_MV            12500
  37 #define STEP_6_25_MV            6250
  38
  39 enum sec_device_type {
  40         S5M8751X,
  41         S5M8763X,
  42         S5M8767X,
  43         S2MPA01,
  44         S2MPS11X,
  45         S2MPS13X,
  46         S2MPS14X,
  47         S2MPU02,
  48 };
  49
  50 /**
  51  * struct sec_pmic_dev - s2m/s5m master device for sub-drivers
  52  * @dev:                Master device of the chip
  53  * @pdata:              Platform data populated with data from DTS
  54  *                      or board files
  55  * @regmap_pmic:        Regmap associated with PMIC's I2C address
  56  * @i2c:                I2C client of the main driver
  57  * @device_type:        Type of device, matches enum sec_device_type
  58  * @irq_base:           Base IRQ number for device, required for IRQs
  59  * @irq:                Generic IRQ number for device
  60  * @irq_data:           Runtime data structure for IRQ controller
  61  * @wakeup:             Whether or not this is a wakeup device
  62  */
  63 struct sec_pmic_dev {
  64         struct device *dev;
  65         struct sec_platform_data *pdata;
  66         struct regmap *regmap_pmic;
  67         struct i2c_client *i2c;
  68
  69         unsigned long device_type;
  70         int irq_base;
  71         int irq;
  72         struct regmap_irq_chip_data *irq_data;
  73
  74         bool wakeup;
  75 };
  76
  77 int sec_irq_init(struct sec_pmic_dev *sec_pmic);
  78 void sec_irq_exit(struct sec_pmic_dev *sec_pmic);
  79 int sec_irq_resume(struct sec_pmic_dev *sec_pmic);
  80
  81 struct sec_platform_data {
  82         struct sec_regulator_data       *regulators;
  83         struct sec_opmode_data          *opmode;
  84         int                             device_type;
  85         int                             num_regulators;
  86
  87         int                             irq_base;
  88         int                             (*cfg_pmic_irq)(void);
  89
  90         bool                            wakeup;
  91         bool                            buck_voltage_lock;
  92
  93         int                             buck_gpios[3];
  94         int                             buck_ds[3];
  95         unsigned int                    buck2_voltage[8];
  96         bool                            buck2_gpiodvs;
  97         unsigned int                    buck3_voltage[8];
  98         bool                            buck3_gpiodvs;
  99         unsigned int                    buck4_voltage[8];
 100         bool                            buck4_gpiodvs;
 101
 102         int                             buck_set1;
 103         int                             buck_set2;
 104         int                             buck_set3;
 105         int                             buck2_enable;
 106         int                             buck3_enable;
 107         int                             buck4_enable;
 108         int                             buck_default_idx;
 109         int                             buck2_default_idx;
 110         int                             buck3_default_idx;
 111         int                             buck4_default_idx;
 112
 113         int                             buck_ramp_delay;
 114
 115         int                             buck2_ramp_delay;
 116         int                             buck34_ramp_delay;
 117         int                             buck5_ramp_delay;
 118         int                             buck16_ramp_delay;
 119         int                             buck7810_ramp_delay;
 120         int                             buck9_ramp_delay;
 121         int                             buck24_ramp_delay;
 122         int                             buck3_ramp_delay;
 123         int                             buck7_ramp_delay;
 124         int                             buck8910_ramp_delay;
 125
 126         bool                            buck1_ramp_enable;
 127         bool                            buck2_ramp_enable;
 128         bool                            buck3_ramp_enable;
 129         bool                            buck4_ramp_enable;
 130         bool                            buck6_ramp_enable;
 131
 132         int                             buck2_init;
 133         int                             buck3_init;
 134         int                             buck4_init;
 135 };
 136
 137 /**
 138  * sec_regulator_data - regulator data
 139  * @id: regulator id
 140  * @initdata: regulator init data (contraints, supplies, ...)
 141  */
 142 struct sec_regulator_data {
 143         int                             id;
 144         struct regulator_init_data      *initdata;
 145         struct device_node              *reg_node;
 146         int                             ext_control_gpio;
 147 };
 148
 149 /*
 150  * sec_opmode_data - regulator operation mode data
 151  * @id: regulator id
 152  * @mode: regulator operation mode
 153  */
 154 struct sec_opmode_data {
 155         int id;
 156         unsigned int mode;
 157 };
 158
 159 /*
 160  * samsung regulator operation mode
 161  * SEC_OPMODE_OFF       Regulator always OFF
 162  * SEC_OPMODE_ON        Regulator always ON
 163  * SEC_OPMODE_LOWPOWER  Regulator is on in low-power mode
 164  * SEC_OPMODE_SUSPEND   Regulator is changed by PWREN pin
 165  *                      If PWREN is high, regulator is on
 166  *                      If PWREN is low, regulator is off
 167  */
 168
 169 enum sec_opmode {
 170         SEC_OPMODE_OFF,
 171         SEC_OPMODE_ON,
 172         SEC_OPMODE_LOWPOWER,
 173         SEC_OPMODE_SUSPEND,
 174 };
 175
 176 #endif /*  __LINUX_MFD_SEC_CORE_H */