Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / include / linux / input / matrix_keypad.h
1 #ifndef _MATRIX_KEYPAD_H
2 #define _MATRIX_KEYPAD_H
3
4 #include <linux/types.h>
5 #include <linux/input.h>
6 #include <linux/of.h>
7
8 #define MATRIX_MAX_ROWS         32
9 #define MATRIX_MAX_COLS         32
10
11 #define KEY(row, col, val)      ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
12                                  (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
13                                  ((val) & 0xffff))
14
15 #define KEY_ROW(k)              (((k) >> 24) & 0xff)
16 #define KEY_COL(k)              (((k) >> 16) & 0xff)
17 #define KEY_VAL(k)              ((k) & 0xffff)
18
19 #define MATRIX_SCAN_CODE(row, col, row_shift)   (((row) << (row_shift)) + (col))
20
21 /**
22  * struct matrix_keymap_data - keymap for matrix keyboards
23  * @keymap: pointer to array of uint32 values encoded with KEY() macro
24  *      representing keymap
25  * @keymap_size: number of entries (initialized) in this keymap
26  *
27  * This structure is supposed to be used by platform code to supply
28  * keymaps to drivers that implement matrix-like keypads/keyboards.
29  */
30 struct matrix_keymap_data {
31         const uint32_t *keymap;
32         unsigned int    keymap_size;
33 };
34
35 /**
36  * struct matrix_keypad_platform_data - platform-dependent keypad data
37  * @keymap_data: pointer to &matrix_keymap_data
38  * @row_gpios: pointer to array of gpio numbers representing rows
39  * @col_gpios: pointer to array of gpio numbers reporesenting colums
40  * @num_row_gpios: actual number of row gpios used by device
41  * @num_col_gpios: actual number of col gpios used by device
42  * @col_scan_delay_us: delay, measured in microseconds, that is
43  *      needed before we can keypad after activating column gpio
44  * @debounce_ms: debounce interval in milliseconds
45  * @clustered_irq: may be specified if interrupts of all row/column GPIOs
46  *      are bundled to one single irq
47  * @clustered_irq_flags: flags that are needed for the clustered irq
48  * @active_low: gpio polarity
49  * @wakeup: controls whether the device should be set up as wakeup
50  *      source
51  * @no_autorepeat: disable key autorepeat
52  *
53  * This structure represents platform-specific data that use used by
54  * matrix_keypad driver to perform proper initialization.
55  */
56 struct matrix_keypad_platform_data {
57         const struct matrix_keymap_data *keymap_data;
58
59         const unsigned int *row_gpios;
60         const unsigned int *col_gpios;
61
62         unsigned int    num_row_gpios;
63         unsigned int    num_col_gpios;
64
65         unsigned int    col_scan_delay_us;
66
67         /* key debounce interval in milli-second */
68         unsigned int    debounce_ms;
69
70         unsigned int    clustered_irq;
71         unsigned int    clustered_irq_flags;
72
73         bool            active_low;
74         bool            wakeup;
75         bool            no_autorepeat;
76 };
77
78 int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
79                                const char *keymap_name,
80                                unsigned int rows, unsigned int cols,
81                                unsigned short *keymap,
82                                struct input_dev *input_dev);
83
84 #ifdef CONFIG_OF
85 /**
86  * matrix_keypad_parse_of_params() - Read parameters from matrix-keypad node
87  *
88  * @dev: Device containing of_node
89  * @rows: Returns number of matrix rows
90  * @cols: Returns number of matrix columns
91  * @return 0 if OK, <0 on error
92  */
93 int matrix_keypad_parse_of_params(struct device *dev,
94                                   unsigned int *rows, unsigned int *cols);
95 #else
96 static inline int matrix_keypad_parse_of_params(struct device *dev,
97                                   unsigned int *rows, unsigned int *cols)
98 {
99         return -ENOSYS;
100 }
101 #endif /* CONFIG_OF */
102
103 #endif /* _MATRIX_KEYPAD_H */