kernel/drivers/video/fbdev/w100fb.c

   1 /*
   2  * linux/drivers/video/w100fb.c
   3  *
   4  * Frame Buffer Device for ATI Imageon w100 (Wallaby)
   5  *
   6  * Copyright (C) 2002, ATI Corp.
   7  * Copyright (C) 2004-2006 Richard Purdie
   8  * Copyright (c) 2005 Ian Molton
   9  * Copyright (c) 2006 Alberto Mardegan
  10  *
  11  * Rewritten for 2.6 by Richard Purdie <rpurdie@rpsys.net>
  12  *
  13  * Generic platform support by Ian Molton <spyro@f2s.com>
  14  * and Richard Purdie <rpurdie@rpsys.net>
  15  *
  16  * w32xx support by Ian Molton
  17  *
  18  * Hardware acceleration support by Alberto Mardegan
  19  * <mardy@users.sourceforge.net>
  20  *
  21  * This program is free software; you can redistribute it and/or modify
  22  * it under the terms of the GNU General Public License version 2 as
  23  * published by the Free Software Foundation.
  24  *
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/fb.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/mm.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/slab.h>
  34 #include <linux/string.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/module.h>
  37 #include <asm/io.h>
  38 #include <asm/uaccess.h>
  39 #include <video/w100fb.h>
  40 #include "w100fb.h"
  41
  42 /*
  43  * Prototypes
  44  */
  45 static void w100_suspend(u32 mode);
  46 static void w100_vsync(void);
  47 static void w100_hw_init(struct w100fb_par*);
  48 static void w100_pwm_setup(struct w100fb_par*);
  49 static void w100_init_clocks(struct w100fb_par*);
  50 static void w100_setup_memory(struct w100fb_par*);
  51 static void w100_init_lcd(struct w100fb_par*);
  52 static void w100_set_dispregs(struct w100fb_par*);
  53 static void w100_update_enable(void);
  54 static void w100_update_disable(void);
  55 static void calc_hsync(struct w100fb_par *par);
  56 static void w100_init_graphic_engine(struct w100fb_par *par);
  57 struct w100_pll_info *w100_get_xtal_table(unsigned int freq);
  58
  59 /* Pseudo palette size */
  60 #define MAX_PALETTES      16
  61
  62 #define W100_SUSPEND_EXTMEM 0
  63 #define W100_SUSPEND_ALL    1
  64
  65 #define BITS_PER_PIXEL    16
  66
  67 /* Remapped addresses for base cfg, memmapped regs and the frame buffer itself */
  68 static void *remapped_base;
  69 static void *remapped_regs;
  70 static void *remapped_fbuf;
  71
  72 #define REMAPPED_FB_LEN   0x15ffff
  73
  74 /* This is the offset in the w100's address space we map the current
  75    framebuffer memory to. We use the position of external memory as
  76    we can remap internal memory to there if external isn't present. */
  77 #define W100_FB_BASE MEM_EXT_BASE_VALUE
  78
  79
  80 /*
  81  * Sysfs functions
  82  */
  83 static ssize_t flip_show(struct device *dev, struct device_attribute *attr, char *buf)
  84 {
  85         struct fb_info *info = dev_get_drvdata(dev);
  86         struct w100fb_par *par=info->par;
  87
  88         return sprintf(buf, "%d\n",par->flip);
  89 }
  90
  91 static ssize_t flip_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
  92 {
  93         unsigned int flip;
  94         struct fb_info *info = dev_get_drvdata(dev);
  95         struct w100fb_par *par=info->par;
  96
  97         flip = simple_strtoul(buf, NULL, 10);
  98
  99         if (flip > 0)
 100                 par->flip = 1;
 101         else
 102                 par->flip = 0;
 103
 104         w100_update_disable();
 105         w100_set_dispregs(par);
 106         w100_update_enable();
 107
 108         calc_hsync(par);
 109
 110         return count;
 111 }
 112
 113 static DEVICE_ATTR(flip, 0644, flip_show, flip_store);
 114
 115 static ssize_t w100fb_reg_read(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 116 {
 117         unsigned long regs, param;
 118         regs = simple_strtoul(buf, NULL, 16);
 119         param = readl(remapped_regs + regs);
 120         printk("Read Register 0x%08lX: 0x%08lX\n", regs, param);
 121         return count;
 122 }
 123
 124 static DEVICE_ATTR(reg_read, 0200, NULL, w100fb_reg_read);
 125
 126 static ssize_t w100fb_reg_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 127 {
 128         unsigned long regs, param;
 129         sscanf(buf, "%lx %lx", &regs, &param);
 130
 131         if (regs <= 0x2000) {
 132                 printk("Write Register 0x%08lX: 0x%08lX\n", regs, param);
 133                 writel(param, remapped_regs + regs);
 134         }
 135
 136         return count;
 137 }
 138
 139 static DEVICE_ATTR(reg_write, 0200, NULL, w100fb_reg_write);
 140
 141
 142 static ssize_t fastpllclk_show(struct device *dev, struct device_attribute *attr, char *buf)
 143 {
 144         struct fb_info *info = dev_get_drvdata(dev);
 145         struct w100fb_par *par=info->par;
 146
 147         return sprintf(buf, "%d\n",par->fastpll_mode);
 148 }
 149
 150 static ssize_t fastpllclk_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 151 {
 152         struct fb_info *info = dev_get_drvdata(dev);
 153         struct w100fb_par *par=info->par;
 154
 155         if (simple_strtoul(buf, NULL, 10) > 0) {
 156                 par->fastpll_mode=1;
 157                 printk("w100fb: Using fast system clock (if possible)\n");
 158         } else {
 159                 par->fastpll_mode=0;
 160                 printk("w100fb: Using normal system clock\n");
 161         }
 162
 163         w100_init_clocks(par);
 164         calc_hsync(par);
 165
 166         return count;
 167 }
 168
 169 static DEVICE_ATTR(fastpllclk, 0644, fastpllclk_show, fastpllclk_store);
 170
 171 /*
 172  * Some touchscreens need hsync information from the video driver to
 173  * function correctly. We export it here.
 174  */
 175 unsigned long w100fb_get_hsynclen(struct device *dev)
 176 {
 177         struct fb_info *info = dev_get_drvdata(dev);
 178         struct w100fb_par *par=info->par;
 179
 180         /* If display is blanked/suspended, hsync isn't active */
 181         if (par->blanked)
 182                 return 0;
 183         else
 184                 return par->hsync_len;
 185 }
 186 EXPORT_SYMBOL(w100fb_get_hsynclen);
 187
 188 static void w100fb_clear_screen(struct w100fb_par *par)
 189 {
 190         memset_io(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), 0, (par->xres * par->yres * BITS_PER_PIXEL/8));
 191 }
 192
 193
 194 /*
 195  * Set a palette value from rgb components
 196  */
 197 static int w100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 198                              u_int trans, struct fb_info *info)
 199 {
 200         unsigned int val;
 201         int ret = 1;
 202
 203         /*
 204          * If greyscale is true, then we convert the RGB value
 205          * to greyscale no matter what visual we are using.
 206          */
 207         if (info->var.grayscale)
 208                 red = green = blue = (19595 * red + 38470 * green + 7471 * blue) >> 16;
 209
 210         /*
 211          * 16-bit True Colour.  We encode the RGB value
 212          * according to the RGB bitfield information.
 213          */
 214         if (regno < MAX_PALETTES) {
 215                 u32 *pal = info->pseudo_palette;
 216
 217                 val = (red & 0xf800) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
 218                 pal[regno] = val;
 219                 ret = 0;
 220         }
 221         return ret;
 222 }
 223
 224
 225 /*
 226  * Blank the display based on value in blank_mode
 227  */
 228 static int w100fb_blank(int blank_mode, struct fb_info *info)
 229 {
 230         struct w100fb_par *par = info->par;
 231         struct w100_tg_info *tg = par->mach->tg;
 232
 233         switch(blank_mode) {
 234
 235         case FB_BLANK_NORMAL:         /* Normal blanking */
 236         case FB_BLANK_VSYNC_SUSPEND:  /* VESA blank (vsync off) */
 237         case FB_BLANK_HSYNC_SUSPEND:  /* VESA blank (hsync off) */
 238         case FB_BLANK_POWERDOWN:      /* Poweroff */
 239                 if (par->blanked == 0) {
 240                         if(tg && tg->suspend)
 241                                 tg->suspend(par);
 242                         par->blanked = 1;
 243                 }
 244                 break;
 245
 246         case FB_BLANK_UNBLANK: /* Unblanking */
 247                 if (par->blanked != 0) {
 248                         if(tg && tg->resume)
 249                                 tg->resume(par);
 250                         par->blanked = 0;
 251                 }
 252                 break;
 253         }
 254         return 0;
 255 }
 256
 257
 258 static void w100_fifo_wait(int entries)
 259 {
 260         union rbbm_status_u status;
 261         int i;
 262
 263         for (i = 0; i < 2000000; i++) {
 264                 status.val = readl(remapped_regs + mmRBBM_STATUS);
 265                 if (status.f.cmdfifo_avail >= entries)
 266                         return;
 267                 udelay(1);
 268         }
 269         printk(KERN_ERR "w100fb: FIFO Timeout!\n");
 270 }
 271
 272
 273 static int w100fb_sync(struct fb_info *info)
 274 {
 275         union rbbm_status_u status;
 276         int i;
 277
 278         for (i = 0; i < 2000000; i++) {
 279                 status.val = readl(remapped_regs + mmRBBM_STATUS);
 280                 if (!status.f.gui_active)
 281                         return 0;
 282                 udelay(1);
 283         }
 284         printk(KERN_ERR "w100fb: Graphic engine timeout!\n");
 285         return -EBUSY;
 286 }
 287
 288
 289 static void w100_init_graphic_engine(struct w100fb_par *par)
 290 {
 291         union dp_gui_master_cntl_u gmc;
 292         union dp_mix_u dp_mix;
 293         union dp_datatype_u dp_datatype;
 294         union dp_cntl_u dp_cntl;
 295
 296         w100_fifo_wait(4);
 297         writel(W100_FB_BASE, remapped_regs + mmDST_OFFSET);
 298         writel(par->xres, remapped_regs + mmDST_PITCH);
 299         writel(W100_FB_BASE, remapped_regs + mmSRC_OFFSET);
 300         writel(par->xres, remapped_regs + mmSRC_PITCH);
 301
 302         w100_fifo_wait(3);
 303         writel(0, remapped_regs + mmSC_TOP_LEFT);
 304         writel((par->yres << 16) | par->xres, remapped_regs + mmSC_BOTTOM_RIGHT);
 305         writel(0x1fff1fff, remapped_regs + mmSRC_SC_BOTTOM_RIGHT);
 306
 307         w100_fifo_wait(4);
 308         dp_cntl.val = 0;
 309         dp_cntl.f.dst_x_dir = 1;
 310         dp_cntl.f.dst_y_dir = 1;
 311         dp_cntl.f.src_x_dir = 1;
 312         dp_cntl.f.src_y_dir = 1;
 313         dp_cntl.f.dst_major_x = 1;
 314         dp_cntl.f.src_major_x = 1;
 315         writel(dp_cntl.val, remapped_regs + mmDP_CNTL);
 316
 317         gmc.val = 0;
 318         gmc.f.gmc_src_pitch_offset_cntl = 1;
 319         gmc.f.gmc_dst_pitch_offset_cntl = 1;
 320         gmc.f.gmc_src_clipping = 1;
 321         gmc.f.gmc_dst_clipping = 1;
 322         gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
 323         gmc.f.gmc_dst_datatype = 3; /* from DstType_16Bpp_444 */
 324         gmc.f.gmc_src_datatype = SRC_DATATYPE_EQU_DST;
 325         gmc.f.gmc_byte_pix_order = 1;
 326         gmc.f.gmc_default_sel = 0;
 327         gmc.f.gmc_rop3 = ROP3_SRCCOPY;
 328         gmc.f.gmc_dp_src_source = DP_SRC_MEM_RECTANGULAR;
 329         gmc.f.gmc_clr_cmp_fcn_dis = 1;
 330         gmc.f.gmc_wr_msk_dis = 1;
 331         gmc.f.gmc_dp_op = DP_OP_ROP;
 332         writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
 333
 334         dp_datatype.val = dp_mix.val = 0;
 335         dp_datatype.f.dp_dst_datatype = gmc.f.gmc_dst_datatype;
 336         dp_datatype.f.dp_brush_datatype = gmc.f.gmc_brush_datatype;
 337         dp_datatype.f.dp_src2_type = 0;
 338         dp_datatype.f.dp_src2_datatype = gmc.f.gmc_src_datatype;
 339         dp_datatype.f.dp_src_datatype = gmc.f.gmc_src_datatype;
 340         dp_datatype.f.dp_byte_pix_order = gmc.f.gmc_byte_pix_order;
 341         writel(dp_datatype.val, remapped_regs + mmDP_DATATYPE);
 342
 343         dp_mix.f.dp_src_source = gmc.f.gmc_dp_src_source;
 344         dp_mix.f.dp_src2_source = 1;
 345         dp_mix.f.dp_rop3 = gmc.f.gmc_rop3;
 346         dp_mix.f.dp_op = gmc.f.gmc_dp_op;
 347         writel(dp_mix.val, remapped_regs + mmDP_MIX);
 348 }
 349
 350
 351 static void w100fb_fillrect(struct fb_info *info,
 352                             const struct fb_fillrect *rect)
 353 {
 354         union dp_gui_master_cntl_u gmc;
 355
 356         if (info->state != FBINFO_STATE_RUNNING)
 357                 return;
 358         if (info->flags & FBINFO_HWACCEL_DISABLED) {
 359                 cfb_fillrect(info, rect);
 360                 return;
 361         }
 362
 363         gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
 364         gmc.f.gmc_rop3 = ROP3_PATCOPY;
 365         gmc.f.gmc_brush_datatype = GMC_BRUSH_SOLID_COLOR;
 366         w100_fifo_wait(2);
 367         writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
 368         writel(rect->color, remapped_regs + mmDP_BRUSH_FRGD_CLR);
 369
 370         w100_fifo_wait(2);
 371         writel((rect->dy << 16) | (rect->dx & 0xffff), remapped_regs + mmDST_Y_X);
 372         writel((rect->width << 16) | (rect->height & 0xffff),
 373                remapped_regs + mmDST_WIDTH_HEIGHT);
 374 }
 375
 376
 377 static void w100fb_copyarea(struct fb_info *info,
 378                             const struct fb_copyarea *area)
 379 {
 380         u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
 381         u32 h = area->height, w = area->width;
 382         union dp_gui_master_cntl_u gmc;
 383
 384         if (info->state != FBINFO_STATE_RUNNING)
 385                 return;
 386         if (info->flags & FBINFO_HWACCEL_DISABLED) {
 387                 cfb_copyarea(info, area);
 388                 return;
 389         }
 390
 391         gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
 392         gmc.f.gmc_rop3 = ROP3_SRCCOPY;
 393         gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
 394         w100_fifo_wait(1);
 395         writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
 396
 397         w100_fifo_wait(3);
 398         writel((sy << 16) | (sx & 0xffff), remapped_regs + mmSRC_Y_X);
 399         writel((dy << 16) | (dx & 0xffff), remapped_regs + mmDST_Y_X);
 400         writel((w << 16) | (h & 0xffff), remapped_regs + mmDST_WIDTH_HEIGHT);
 401 }
 402
 403
 404 /*
 405  *  Change the resolution by calling the appropriate hardware functions
 406  */
 407 static void w100fb_activate_var(struct w100fb_par *par)
 408 {
 409         struct w100_tg_info *tg = par->mach->tg;
 410
 411         w100_pwm_setup(par);
 412         w100_setup_memory(par);
 413         w100_init_clocks(par);
 414         w100fb_clear_screen(par);
 415         w100_vsync();
 416
 417         w100_update_disable();
 418         w100_init_lcd(par);
 419         w100_set_dispregs(par);
 420         w100_update_enable();
 421         w100_init_graphic_engine(par);
 422
 423         calc_hsync(par);
 424
 425         if (!par->blanked && tg && tg->change)
 426                 tg->change(par);
 427 }
 428
 429
 430 /* Select the smallest mode that allows the desired resolution to be
 431  * displayed. If desired, the x and y parameters can be rounded up to
 432  * match the selected mode.
 433  */
 434 static struct w100_mode *w100fb_get_mode(struct w100fb_par *par, unsigned int *x, unsigned int *y, int saveval)
 435 {
 436         struct w100_mode *mode = NULL;
 437         struct w100_mode *modelist = par->mach->modelist;
 438         unsigned int best_x = 0xffffffff, best_y = 0xffffffff;
 439         unsigned int i;
 440
 441         for (i = 0 ; i < par->mach->num_modes ; i++) {
 442                 if (modelist[i].xres >= *x && modelist[i].yres >= *y &&
 443                                 modelist[i].xres < best_x && modelist[i].yres < best_y) {
 444                         best_x = modelist[i].xres;
 445                         best_y = modelist[i].yres;
 446                         mode = &modelist[i];
 447                 } else if(modelist[i].xres >= *y && modelist[i].yres >= *x &&
 448                         modelist[i].xres < best_y && modelist[i].yres < best_x) {
 449                         best_x = modelist[i].yres;
 450                         best_y = modelist[i].xres;
 451                         mode = &modelist[i];
 452                 }
 453         }
 454
 455         if (mode && saveval) {
 456                 *x = best_x;
 457                 *y = best_y;
 458         }
 459
 460         return mode;
 461 }
 462
 463
 464 /*
 465  *  w100fb_check_var():
 466  *  Get the video params out of 'var'. If a value doesn't fit, round it up,
 467  *  if it's too big, return -EINVAL.
 468  */
 469 static int w100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 470 {
 471         struct w100fb_par *par=info->par;
 472
 473         if(!w100fb_get_mode(par, &var->xres, &var->yres, 1))
 474                 return -EINVAL;
 475
 476         if (par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (par->mach->mem->size+1)))
 477                 return -EINVAL;
 478
 479         if (!par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)))
 480                 return -EINVAL;
 481
 482         var->xres_virtual = max(var->xres_virtual, var->xres);
 483         var->yres_virtual = max(var->yres_virtual, var->yres);
 484
 485         if (var->bits_per_pixel > BITS_PER_PIXEL)
 486                 return -EINVAL;
 487         else
 488                 var->bits_per_pixel = BITS_PER_PIXEL;
 489
 490         var->red.offset = 11;
 491         var->red.length = 5;
 492         var->green.offset = 5;
 493         var->green.length = 6;
 494         var->blue.offset = 0;
 495         var->blue.length = 5;
 496         var->transp.offset = var->transp.length = 0;
 497
 498         var->nonstd = 0;
 499         var->height = -1;
 500         var->width = -1;
 501         var->vmode = FB_VMODE_NONINTERLACED;
 502         var->sync = 0;
 503         var->pixclock = 0x04;  /* 171521; */
 504
 505         return 0;
 506 }
 507
 508
 509 /*
 510  * w100fb_set_par():
 511  *      Set the user defined part of the display for the specified console
 512  *  by looking at the values in info.var
 513  */
 514 static int w100fb_set_par(struct fb_info *info)
 515 {
 516         struct w100fb_par *par=info->par;
 517
 518         if (par->xres != info->var.xres || par->yres != info->var.yres) {
 519                 par->xres = info->var.xres;
 520                 par->yres = info->var.yres;
 521                 par->mode = w100fb_get_mode(par, &par->xres, &par->yres, 0);
 522
 523                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 524                 info->fix.ypanstep = 0;
 525                 info->fix.ywrapstep = 0;
 526                 info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
 527
 528                 mutex_lock(&info->mm_lock);
 529                 if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
 530                         par->extmem_active = 1;
 531                         info->fix.smem_len = par->mach->mem->size+1;
 532                 } else {
 533                         par->extmem_active = 0;
 534                         info->fix.smem_len = MEM_INT_SIZE+1;
 535                 }
 536                 mutex_unlock(&info->mm_lock);
 537
 538                 w100fb_activate_var(par);
 539         }
 540         return 0;
 541 }
 542
 543
 544 /*
 545  *  Frame buffer operations
 546  */
 547 static struct fb_ops w100fb_ops = {
 548         .owner        = THIS_MODULE,
 549         .fb_check_var = w100fb_check_var,
 550         .fb_set_par   = w100fb_set_par,
 551         .fb_setcolreg = w100fb_setcolreg,
 552         .fb_blank     = w100fb_blank,
 553         .fb_fillrect  = w100fb_fillrect,
 554         .fb_copyarea  = w100fb_copyarea,
 555         .fb_imageblit = cfb_imageblit,
 556         .fb_sync      = w100fb_sync,
 557 };
 558
 559 #ifdef CONFIG_PM
 560 static void w100fb_save_vidmem(struct w100fb_par *par)
 561 {
 562         int memsize;
 563
 564         if (par->extmem_active) {
 565                 memsize=par->mach->mem->size;
 566                 par->saved_extmem = vmalloc(memsize);
 567                 if (par->saved_extmem)
 568                         memcpy_fromio(par->saved_extmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
 569         }
 570         memsize=MEM_INT_SIZE;
 571         par->saved_intmem = vmalloc(memsize);
 572         if (par->saved_intmem && par->extmem_active)
 573                 memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), memsize);
 574         else if (par->saved_intmem)
 575                 memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
 576 }
 577
 578 static void w100fb_restore_vidmem(struct w100fb_par *par)
 579 {
 580         int memsize;
 581
 582         if (par->extmem_active && par->saved_extmem) {
 583                 memsize=par->mach->mem->size;
 584                 memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_extmem, memsize);
 585                 vfree(par->saved_extmem);
 586         }
 587         if (par->saved_intmem) {
 588                 memsize=MEM_INT_SIZE;
 589                 if (par->extmem_active)
 590                         memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), par->saved_intmem, memsize);
 591                 else
 592                         memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_intmem, memsize);
 593                 vfree(par->saved_intmem);
 594         }
 595 }
 596
 597 static int w100fb_suspend(struct platform_device *dev, pm_message_t state)
 598 {
 599         struct fb_info *info = platform_get_drvdata(dev);
 600         struct w100fb_par *par=info->par;
 601         struct w100_tg_info *tg = par->mach->tg;
 602
 603         w100fb_save_vidmem(par);
 604         if(tg && tg->suspend)
 605                 tg->suspend(par);
 606         w100_suspend(W100_SUSPEND_ALL);
 607         par->blanked = 1;
 608
 609         return 0;
 610 }
 611
 612 static int w100fb_resume(struct platform_device *dev)
 613 {
 614         struct fb_info *info = platform_get_drvdata(dev);
 615         struct w100fb_par *par=info->par;
 616         struct w100_tg_info *tg = par->mach->tg;
 617
 618         w100_hw_init(par);
 619         w100fb_activate_var(par);
 620         w100fb_restore_vidmem(par);
 621         if(tg && tg->resume)
 622                 tg->resume(par);
 623         par->blanked = 0;
 624
 625         return 0;
 626 }
 627 #else
 628 #define w100fb_suspend  NULL
 629 #define w100fb_resume   NULL
 630 #endif
 631
 632
 633 int w100fb_probe(struct platform_device *pdev)
 634 {
 635         int err = -EIO;
 636         struct w100fb_mach_info *inf;
 637         struct fb_info *info = NULL;
 638         struct w100fb_par *par;
 639         struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 640         unsigned int chip_id;
 641
 642         if (!mem)
 643                 return -EINVAL;
 644
 645         /* Remap the chip base address */
 646         remapped_base = ioremap_nocache(mem->start+W100_CFG_BASE, W100_CFG_LEN);
 647         if (remapped_base == NULL)
 648                 goto out;
 649
 650         /* Map the register space */
 651         remapped_regs = ioremap_nocache(mem->start+W100_REG_BASE, W100_REG_LEN);
 652         if (remapped_regs == NULL)
 653                 goto out;
 654
 655         /* Identify the chip */
 656         printk("Found ");
 657         chip_id = readl(remapped_regs + mmCHIP_ID);
 658         switch(chip_id) {
 659                 case CHIP_ID_W100:  printk("w100");  break;
 660                 case CHIP_ID_W3200: printk("w3200"); break;
 661                 case CHIP_ID_W3220: printk("w3220"); break;
 662                 default:
 663                         printk("Unknown imageon chip ID\n");
 664                         err = -ENODEV;
 665                         goto out;
 666         }
 667         printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE);
 668
 669         /* Remap the framebuffer */
 670         remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE);
 671         if (remapped_fbuf == NULL)
 672                 goto out;
 673
 674         info=framebuffer_alloc(sizeof(struct w100fb_par), &pdev->dev);
 675         if (!info) {
 676                 err = -ENOMEM;
 677                 goto out;
 678         }
 679
 680         par = info->par;
 681         platform_set_drvdata(pdev, info);
 682
 683         inf = dev_get_platdata(&pdev->dev);
 684         par->chip_id = chip_id;
 685         par->mach = inf;
 686         par->fastpll_mode = 0;
 687         par->blanked = 0;
 688
 689         par->pll_table=w100_get_xtal_table(inf->xtal_freq);
 690         if (!par->pll_table) {
 691                 printk(KERN_ERR "No matching Xtal definition found\n");
 692                 err = -EINVAL;
 693                 goto out;
 694         }
 695
 696         info->pseudo_palette = kmalloc(sizeof (u32) * MAX_PALETTES, GFP_KERNEL);
 697         if (!info->pseudo_palette) {
 698                 err = -ENOMEM;
 699                 goto out;
 700         }
 701
 702         info->fbops = &w100fb_ops;
 703         info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
 704                 FBINFO_HWACCEL_FILLRECT;
 705         info->node = -1;
 706         info->screen_base = remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE);
 707         info->screen_size = REMAPPED_FB_LEN;
 708
 709         strcpy(info->fix.id, "w100fb");
 710         info->fix.type = FB_TYPE_PACKED_PIXELS;
 711         info->fix.type_aux = 0;
 712         info->fix.accel = FB_ACCEL_NONE;
 713         info->fix.smem_start = mem->start+W100_FB_BASE;
 714         info->fix.mmio_start = mem->start+W100_REG_BASE;
 715         info->fix.mmio_len = W100_REG_LEN;
 716
 717         if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
 718                 err = -ENOMEM;
 719                 goto out;
 720         }
 721
 722         par->mode = &inf->modelist[0];
 723         if(inf->init_mode & INIT_MODE_ROTATED) {
 724                 info->var.xres = par->mode->yres;
 725                 info->var.yres = par->mode->xres;
 726         }
 727         else {
 728                 info->var.xres = par->mode->xres;
 729                 info->var.yres = par->mode->yres;
 730         }
 731
 732         if(inf->init_mode &= INIT_MODE_FLIPPED)
 733                 par->flip = 1;
 734         else
 735                 par->flip = 0;
 736
 737         info->var.xres_virtual = info->var.xres;
 738         info->var.yres_virtual = info->var.yres;
 739         info->var.pixclock = 0x04;  /* 171521; */
 740         info->var.sync = 0;
 741         info->var.grayscale = 0;
 742         info->var.xoffset = info->var.yoffset = 0;
 743         info->var.accel_flags = 0;
 744         info->var.activate = FB_ACTIVATE_NOW;
 745
 746         w100_hw_init(par);
 747
 748         if (w100fb_check_var(&info->var, info) < 0) {
 749                 err = -EINVAL;
 750                 goto out;
 751         }
 752
 753         if (register_framebuffer(info) < 0) {
 754                 err = -EINVAL;
 755                 goto out;
 756         }
 757
 758         err = device_create_file(&pdev->dev, &dev_attr_fastpllclk);
 759         err |= device_create_file(&pdev->dev, &dev_attr_reg_read);
 760         err |= device_create_file(&pdev->dev, &dev_attr_reg_write);
 761         err |= device_create_file(&pdev->dev, &dev_attr_flip);
 762
 763         if (err != 0)
 764                 fb_warn(info, "failed to register attributes (%d)\n", err);
 765
 766         fb_info(info, "%s frame buffer device\n", info->fix.id);
 767         return 0;
 768 out:
 769         if (info) {
 770                 fb_dealloc_cmap(&info->cmap);
 771                 kfree(info->pseudo_palette);
 772         }
 773         if (remapped_fbuf != NULL)
 774                 iounmap(remapped_fbuf);
 775         if (remapped_regs != NULL)
 776                 iounmap(remapped_regs);
 777         if (remapped_base != NULL)
 778                 iounmap(remapped_base);
 779         if (info)
 780                 framebuffer_release(info);
 781         return err;
 782 }
 783
 784
 785 static int w100fb_remove(struct platform_device *pdev)
 786 {
 787         struct fb_info *info = platform_get_drvdata(pdev);
 788         struct w100fb_par *par=info->par;
 789
 790         device_remove_file(&pdev->dev, &dev_attr_fastpllclk);
 791         device_remove_file(&pdev->dev, &dev_attr_reg_read);
 792         device_remove_file(&pdev->dev, &dev_attr_reg_write);
 793         device_remove_file(&pdev->dev, &dev_attr_flip);
 794
 795         unregister_framebuffer(info);
 796
 797         vfree(par->saved_intmem);
 798         vfree(par->saved_extmem);
 799         kfree(info->pseudo_palette);
 800         fb_dealloc_cmap(&info->cmap);
 801
 802         iounmap(remapped_base);
 803         iounmap(remapped_regs);
 804         iounmap(remapped_fbuf);
 805
 806         framebuffer_release(info);
 807
 808         return 0;
 809 }
 810
 811
 812 /* ------------------- chipset specific functions -------------------------- */
 813
 814
 815 static void w100_soft_reset(void)
 816 {
 817         u16 val = readw((u16 *) remapped_base + cfgSTATUS);
 818         writew(val | 0x08, (u16 *) remapped_base + cfgSTATUS);
 819         udelay(100);
 820         writew(0x00, (u16 *) remapped_base + cfgSTATUS);
 821         udelay(100);
 822 }
 823
 824 static void w100_update_disable(void)
 825 {
 826         union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
 827
 828         /* Prevent display updates */
 829         disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
 830         disp_db_buf_wr_cntl.f.update_db_buf = 0;
 831         disp_db_buf_wr_cntl.f.en_db_buf = 0;
 832         writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
 833 }
 834
 835 static void w100_update_enable(void)
 836 {
 837         union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
 838
 839         /* Enable display updates */
 840         disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
 841         disp_db_buf_wr_cntl.f.update_db_buf = 1;
 842         disp_db_buf_wr_cntl.f.en_db_buf = 1;
 843         writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
 844 }
 845
 846 unsigned long w100fb_gpio_read(int port)
 847 {
 848         unsigned long value;
 849
 850         if (port==W100_GPIO_PORT_A)
 851                 value = readl(remapped_regs + mmGPIO_DATA);
 852         else
 853                 value = readl(remapped_regs + mmGPIO_DATA2);
 854
 855         return value;
 856 }
 857
 858 void w100fb_gpio_write(int port, unsigned long value)
 859 {
 860         if (port==W100_GPIO_PORT_A)
 861                 writel(value, remapped_regs + mmGPIO_DATA);
 862         else
 863                 writel(value, remapped_regs + mmGPIO_DATA2);
 864 }
 865 EXPORT_SYMBOL(w100fb_gpio_read);
 866 EXPORT_SYMBOL(w100fb_gpio_write);
 867
 868 /*
 869  * Initialization of critical w100 hardware
 870  */
 871 static void w100_hw_init(struct w100fb_par *par)
 872 {
 873         u32 temp32;
 874         union cif_cntl_u cif_cntl;
 875         union intf_cntl_u intf_cntl;
 876         union cfgreg_base_u cfgreg_base;
 877         union wrap_top_dir_u wrap_top_dir;
 878         union cif_read_dbg_u cif_read_dbg;
 879         union cpu_defaults_u cpu_default;
 880         union cif_write_dbg_u cif_write_dbg;
 881         union wrap_start_dir_u wrap_start_dir;
 882         union cif_io_u cif_io;
 883         struct w100_gpio_regs *gpio = par->mach->gpio;
 884
 885         w100_soft_reset();
 886
 887         /* This is what the fpga_init code does on reset. May be wrong
 888            but there is little info available */
 889         writel(0x31, remapped_regs + mmSCRATCH_UMSK);
 890         for (temp32 = 0; temp32 < 10000; temp32++)
 891                 readl(remapped_regs + mmSCRATCH_UMSK);
 892         writel(0x30, remapped_regs + mmSCRATCH_UMSK);
 893
 894         /* Set up CIF */
 895         cif_io.val = defCIF_IO;
 896         writel((u32)(cif_io.val), remapped_regs + mmCIF_IO);
 897
 898         cif_write_dbg.val = readl(remapped_regs + mmCIF_WRITE_DBG);
 899         cif_write_dbg.f.dis_packer_ful_during_rbbm_timeout = 0;
 900         cif_write_dbg.f.en_dword_split_to_rbbm = 1;
 901         cif_write_dbg.f.dis_timeout_during_rbbm = 1;
 902         writel((u32) (cif_write_dbg.val), remapped_regs + mmCIF_WRITE_DBG);
 903
 904         cif_read_dbg.val = readl(remapped_regs + mmCIF_READ_DBG);
 905         cif_read_dbg.f.dis_rd_same_byte_to_trig_fetch = 1;
 906         writel((u32) (cif_read_dbg.val), remapped_regs + mmCIF_READ_DBG);
 907
 908         cif_cntl.val = readl(remapped_regs + mmCIF_CNTL);
 909         cif_cntl.f.dis_system_bits = 1;
 910         cif_cntl.f.dis_mr = 1;
 911         cif_cntl.f.en_wait_to_compensate_dq_prop_dly = 0;
 912         cif_cntl.f.intb_oe = 1;
 913         cif_cntl.f.interrupt_active_high = 1;
 914         writel((u32) (cif_cntl.val), remapped_regs + mmCIF_CNTL);
 915
 916         /* Setup cfgINTF_CNTL and cfgCPU defaults */
 917         intf_cntl.val = defINTF_CNTL;
 918         intf_cntl.f.ad_inc_a = 1;
 919         intf_cntl.f.ad_inc_b = 1;
 920         intf_cntl.f.rd_data_rdy_a = 0;
 921         intf_cntl.f.rd_data_rdy_b = 0;
 922         writeb((u8) (intf_cntl.val), remapped_base + cfgINTF_CNTL);
 923
 924         cpu_default.val = defCPU_DEFAULTS;
 925         cpu_default.f.access_ind_addr_a = 1;
 926         cpu_default.f.access_ind_addr_b = 1;
 927         cpu_default.f.access_scratch_reg = 1;
 928         cpu_default.f.transition_size = 0;
 929         writeb((u8) (cpu_default.val), remapped_base + cfgCPU_DEFAULTS);
 930
 931         /* set up the apertures */
 932         writeb((u8) (W100_REG_BASE >> 16), remapped_base + cfgREG_BASE);
 933
 934         cfgreg_base.val = defCFGREG_BASE;
 935         cfgreg_base.f.cfgreg_base = W100_CFG_BASE;
 936         writel((u32) (cfgreg_base.val), remapped_regs + mmCFGREG_BASE);
 937
 938         wrap_start_dir.val = defWRAP_START_DIR;
 939         wrap_start_dir.f.start_addr = WRAP_BUF_BASE_VALUE >> 1;
 940         writel((u32) (wrap_start_dir.val), remapped_regs + mmWRAP_START_DIR);
 941
 942         wrap_top_dir.val = defWRAP_TOP_DIR;
 943         wrap_top_dir.f.top_addr = WRAP_BUF_TOP_VALUE >> 1;
 944         writel((u32) (wrap_top_dir.val), remapped_regs + mmWRAP_TOP_DIR);
 945
 946         writel((u32) 0x2440, remapped_regs + mmRBBM_CNTL);
 947
 948         /* Set the hardware to 565 colour */
 949         temp32 = readl(remapped_regs + mmDISP_DEBUG2);
 950         temp32 &= 0xff7fffff;
 951         temp32 |= 0x00800000;
 952         writel(temp32, remapped_regs + mmDISP_DEBUG2);
 953
 954         /* Initialise the GPIO lines */
 955         if (gpio) {
 956                 writel(gpio->init_data1, remapped_regs + mmGPIO_DATA);
 957                 writel(gpio->init_data2, remapped_regs + mmGPIO_DATA2);
 958                 writel(gpio->gpio_dir1,  remapped_regs + mmGPIO_CNTL1);
 959                 writel(gpio->gpio_oe1,   remapped_regs + mmGPIO_CNTL2);
 960                 writel(gpio->gpio_dir2,  remapped_regs + mmGPIO_CNTL3);
 961                 writel(gpio->gpio_oe2,   remapped_regs + mmGPIO_CNTL4);
 962         }
 963 }
 964
 965
 966 struct power_state {
 967         union clk_pin_cntl_u clk_pin_cntl;
 968         union pll_ref_fb_div_u pll_ref_fb_div;
 969         union pll_cntl_u pll_cntl;
 970         union sclk_cntl_u sclk_cntl;
 971         union pclk_cntl_u pclk_cntl;
 972         union pwrmgt_cntl_u pwrmgt_cntl;
 973         int auto_mode;  /* system clock auto changing? */
 974 };
 975
 976
 977 static struct power_state w100_pwr_state;
 978
 979 /* The PLL Fout is determined by (XtalFreq/(M+1)) * ((N_int+1) + (N_fac/8)) */
 980
 981 /* 12.5MHz Crystal PLL Table */
 982 static struct w100_pll_info xtal_12500000[] = {
 983         /*freq     M   N_int    N_fac  tfgoal  lock_time */
 984         { 50,      0,   1,       0,     0xe0,        56},  /*  50.00 MHz */
 985         { 75,      0,   5,       0,     0xde,        37},  /*  75.00 MHz */
 986         {100,      0,   7,       0,     0xe0,        28},  /* 100.00 MHz */
 987         {125,      0,   9,       0,     0xe0,        22},  /* 125.00 MHz */
 988         {150,      0,   11,      0,     0xe0,        17},  /* 150.00 MHz */
 989         {  0,      0,   0,       0,        0,         0},  /* Terminator */
 990 };
 991
 992 /* 14.318MHz Crystal PLL Table */
 993 static struct w100_pll_info xtal_14318000[] = {
 994         /*freq     M   N_int    N_fac  tfgoal  lock_time */
 995         { 40,      4,   13,      0,     0xe0,        80}, /* tfgoal guessed */
 996         { 50,      1,   6,       0,     0xe0,        64}, /*  50.05 MHz */
 997         { 57,      2,   11,      0,     0xe0,        53}, /* tfgoal guessed */
 998         { 75,      0,   4,       3,     0xe0,        43}, /*  75.08 MHz */
 999         {100,      0,   6,       0,     0xe0,        32}, /* 100.10 MHz */
1000         {  0,      0,   0,       0,        0,         0},
1001 };
1002
1003 /* 16MHz Crystal PLL Table */
1004 static struct w100_pll_info xtal_16000000[] = {
1005         /*freq     M   N_int    N_fac  tfgoal  lock_time */
1006         { 72,      1,   8,       0,     0xe0,        48}, /* tfgoal guessed */
1007         { 80,      1,   9,       0,     0xe0,        13}, /* tfgoal guessed */
1008         { 95,      1,   10,      7,     0xe0,        38}, /* tfgoal guessed */
1009         { 96,      1,   11,      0,     0xe0,        36}, /* tfgoal guessed */
1010         {  0,      0,   0,       0,        0,         0},
1011 };
1012
1013 static struct pll_entries {
1014         int xtal_freq;
1015         struct w100_pll_info *pll_table;
1016 } w100_pll_tables[] = {
1017         { 12500000, &xtal_12500000[0] },
1018         { 14318000, &xtal_14318000[0] },
1019         { 16000000, &xtal_16000000[0] },
1020         { 0 },
1021 };
1022
1023 struct w100_pll_info *w100_get_xtal_table(unsigned int freq)
1024 {
1025         struct pll_entries *pll_entry = w100_pll_tables;
1026
1027         do {
1028                 if (freq == pll_entry->xtal_freq)
1029                         return pll_entry->pll_table;
1030                 pll_entry++;
1031         } while (pll_entry->xtal_freq);
1032         return 0;
1033 }
1034
1035
1036 static unsigned int w100_get_testcount(unsigned int testclk_sel)
1037 {
1038         union clk_test_cntl_u clk_test_cntl;
1039
1040         udelay(5);
1041
1042         /* Select the test clock source and reset */
1043         clk_test_cntl.f.start_check_freq = 0x0;
1044         clk_test_cntl.f.testclk_sel = testclk_sel;
1045         clk_test_cntl.f.tstcount_rst = 0x1; /* set reset */
1046         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1047
1048         clk_test_cntl.f.tstcount_rst = 0x0; /* clear reset */
1049         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1050
1051         /* Run clock test */
1052         clk_test_cntl.f.start_check_freq = 0x1;
1053         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1054
1055         /* Give the test time to complete */
1056         udelay(20);
1057
1058         /* Return the result */
1059         clk_test_cntl.val = readl(remapped_regs + mmCLK_TEST_CNTL);
1060         clk_test_cntl.f.start_check_freq = 0x0;
1061         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1062
1063         return clk_test_cntl.f.test_count;
1064 }
1065
1066
1067 static int w100_pll_adjust(struct w100_pll_info *pll)
1068 {
1069         unsigned int tf80;
1070         unsigned int tf20;
1071
1072         /* Initial Settings */
1073         w100_pwr_state.pll_cntl.f.pll_pwdn = 0x0;     /* power down */
1074         w100_pwr_state.pll_cntl.f.pll_reset = 0x0;    /* not reset */
1075         w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x1;   /* Hi-Z */
1076         w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;      /* VCO gain = 0 */
1077         w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;    /* VCO frequency range control = off */
1078         w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;  /* current offset inside VCO = 0 */
1079         w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
1080
1081         /* Wai Ming 80 percent of VDD 1.3V gives 1.04V, minimum operating voltage is 1.08V
1082          * therefore, commented out the following lines
1083          * tf80 meant tf100
1084          */
1085         do {
1086                 /* set VCO input = 0.8 * VDD */
1087                 w100_pwr_state.pll_cntl.f.pll_dactal = 0xd;
1088                 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1089
1090                 tf80 = w100_get_testcount(TESTCLK_SRC_PLL);
1091                 if (tf80 >= (pll->tfgoal)) {
1092                         /* set VCO input = 0.2 * VDD */
1093                         w100_pwr_state.pll_cntl.f.pll_dactal = 0x7;
1094                         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1095
1096                         tf20 = w100_get_testcount(TESTCLK_SRC_PLL);
1097                         if (tf20 <= (pll->tfgoal))
1098                                 return 1;  /* Success */
1099
1100                         if ((w100_pwr_state.pll_cntl.f.pll_vcofr == 0x0) &&
1101                                 ((w100_pwr_state.pll_cntl.f.pll_pvg == 0x7) ||
1102                                 (w100_pwr_state.pll_cntl.f.pll_ioffset == 0x0))) {
1103                                 /* slow VCO config */
1104                                 w100_pwr_state.pll_cntl.f.pll_vcofr = 0x1;
1105                                 w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;
1106                                 w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
1107                                 continue;
1108                         }
1109                 }
1110                 if ((w100_pwr_state.pll_cntl.f.pll_ioffset) < 0x3) {
1111                         w100_pwr_state.pll_cntl.f.pll_ioffset += 0x1;
1112                 } else if ((w100_pwr_state.pll_cntl.f.pll_pvg) < 0x7) {
1113                         w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
1114                         w100_pwr_state.pll_cntl.f.pll_pvg += 0x1;
1115                 } else {
1116                         return 0;  /* Error */
1117                 }
1118         } while(1);
1119 }
1120
1121
1122 /*
1123  * w100_pll_calibration
1124  */
1125 static int w100_pll_calibration(struct w100_pll_info *pll)
1126 {
1127         int status;
1128
1129         status = w100_pll_adjust(pll);
1130
1131         /* PLL Reset And Lock */
1132         /* set VCO input = 0.5 * VDD */
1133         w100_pwr_state.pll_cntl.f.pll_dactal = 0xa;
1134         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1135
1136         udelay(1);  /* reset time */
1137
1138         /* enable charge pump */
1139         w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;  /* normal */
1140         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1141
1142         /* set VCO input = Hi-Z, disable DAC */
1143         w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;
1144         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1145
1146         udelay(400);  /* lock time */
1147
1148         /* PLL locked */
1149
1150         return status;
1151 }
1152
1153
1154 static int w100_pll_set_clk(struct w100_pll_info *pll)
1155 {
1156         int status;
1157
1158         if (w100_pwr_state.auto_mode == 1)  /* auto mode */
1159         {
1160                 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;  /* disable fast to normal */
1161                 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;  /* disable normal to fast */
1162                 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1163         }
1164
1165         /* Set system clock source to XTAL whilst adjusting the PLL! */
1166         w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
1167         writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
1168
1169         w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = pll->M;
1170         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = pll->N_int;
1171         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = pll->N_fac;
1172         w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = pll->lock_time;
1173         writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV);
1174
1175         w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0;
1176         writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1177
1178         status = w100_pll_calibration(pll);
1179
1180         if (w100_pwr_state.auto_mode == 1)  /* auto mode */
1181         {
1182                 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x1;  /* reenable fast to normal */
1183                 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x1;  /* reenable normal to fast  */
1184                 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1185         }
1186         return status;
1187 }
1188
1189 /* freq = target frequency of the PLL */
1190 static int w100_set_pll_freq(struct w100fb_par *par, unsigned int freq)
1191 {
1192         struct w100_pll_info *pll = par->pll_table;
1193
1194         do {
1195                 if (freq == pll->freq) {
1196                         return w100_pll_set_clk(pll);
1197                 }
1198                 pll++;
1199         } while(pll->freq);
1200         return 0;
1201 }
1202
1203 /* Set up an initial state.  Some values/fields set
1204    here will be overwritten. */
1205 static void w100_pwm_setup(struct w100fb_par *par)
1206 {
1207         w100_pwr_state.clk_pin_cntl.f.osc_en = 0x1;
1208         w100_pwr_state.clk_pin_cntl.f.osc_gain = 0x1f;
1209         w100_pwr_state.clk_pin_cntl.f.dont_use_xtalin = 0x0;
1210         w100_pwr_state.clk_pin_cntl.f.xtalin_pm_en = 0x0;
1211         w100_pwr_state.clk_pin_cntl.f.xtalin_dbl_en = par->mach->xtal_dbl ? 1 : 0;
1212         w100_pwr_state.clk_pin_cntl.f.cg_debug = 0x0;
1213         writel((u32) (w100_pwr_state.clk_pin_cntl.val), remapped_regs + mmCLK_PIN_CNTL);
1214
1215         w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
1216         w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = 0x0;  /* Pfast = 1 */
1217         w100_pwr_state.sclk_cntl.f.sclk_clkon_hys = 0x3;
1218         w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = 0x0;  /* Pslow = 1 */
1219         w100_pwr_state.sclk_cntl.f.disp_cg_ok2switch_en = 0x0;
1220         w100_pwr_state.sclk_cntl.f.sclk_force_reg = 0x0;    /* Dynamic */
1221         w100_pwr_state.sclk_cntl.f.sclk_force_disp = 0x0;   /* Dynamic */
1222         w100_pwr_state.sclk_cntl.f.sclk_force_mc = 0x0;     /* Dynamic */
1223         w100_pwr_state.sclk_cntl.f.sclk_force_extmc = 0x0;  /* Dynamic */
1224         w100_pwr_state.sclk_cntl.f.sclk_force_cp = 0x0;     /* Dynamic */
1225         w100_pwr_state.sclk_cntl.f.sclk_force_e2 = 0x0;     /* Dynamic */
1226         w100_pwr_state.sclk_cntl.f.sclk_force_e3 = 0x0;     /* Dynamic */
1227         w100_pwr_state.sclk_cntl.f.sclk_force_idct = 0x0;   /* Dynamic */
1228         w100_pwr_state.sclk_cntl.f.sclk_force_bist = 0x0;   /* Dynamic */
1229         w100_pwr_state.sclk_cntl.f.busy_extend_cp = 0x0;
1230         w100_pwr_state.sclk_cntl.f.busy_extend_e2 = 0x0;
1231         w100_pwr_state.sclk_cntl.f.busy_extend_e3 = 0x0;
1232         w100_pwr_state.sclk_cntl.f.busy_extend_idct = 0x0;
1233         writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
1234
1235         w100_pwr_state.pclk_cntl.f.pclk_src_sel = CLK_SRC_XTAL;
1236         w100_pwr_state.pclk_cntl.f.pclk_post_div = 0x1;    /* P = 2 */
1237         w100_pwr_state.pclk_cntl.f.pclk_force_disp = 0x0;  /* Dynamic */
1238         writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
1239
1240         w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = 0x0;     /* M = 1 */
1241         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = 0x0;  /* N = 1.0 */
1242         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = 0x0;
1243         w100_pwr_state.pll_ref_fb_div.f.pll_reset_time = 0x5;
1244         w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = 0xff;
1245         writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV);
1246
1247         w100_pwr_state.pll_cntl.f.pll_pwdn = 0x1;
1248         w100_pwr_state.pll_cntl.f.pll_reset = 0x1;
1249         w100_pwr_state.pll_cntl.f.pll_pm_en = 0x0;
1250         w100_pwr_state.pll_cntl.f.pll_mode = 0x0;  /* uses VCO clock */
1251         w100_pwr_state.pll_cntl.f.pll_refclk_sel = 0x0;
1252         w100_pwr_state.pll_cntl.f.pll_fbclk_sel = 0x0;
1253         w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;
1254         w100_pwr_state.pll_cntl.f.pll_pcp = 0x4;
1255         w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;
1256         w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;
1257         w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
1258         w100_pwr_state.pll_cntl.f.pll_pecc_mode = 0x0;
1259         w100_pwr_state.pll_cntl.f.pll_pecc_scon = 0x0;
1260         w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;  /* Hi-Z */
1261         w100_pwr_state.pll_cntl.f.pll_cp_clip = 0x3;
1262         w100_pwr_state.pll_cntl.f.pll_conf = 0x2;
1263         w100_pwr_state.pll_cntl.f.pll_mbctrl = 0x2;
1264         w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
1265         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1266
1267         w100_pwr_state.pwrmgt_cntl.f.pwm_enable = 0x0;
1268         w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0x1;  /* normal mode (0, 1, 3) */
1269         w100_pwr_state.pwrmgt_cntl.f.pwm_wakeup_cond = 0x0;
1270         w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;
1271         w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;
1272         w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_cond = 0x1;  /* PM4,ENG */
1273         w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_cond = 0x1;  /* PM4,ENG */
1274         w100_pwr_state.pwrmgt_cntl.f.pwm_idle_timer = 0xFF;
1275         w100_pwr_state.pwrmgt_cntl.f.pwm_busy_timer = 0xFF;
1276         writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1277
1278         w100_pwr_state.auto_mode = 0;  /* manual mode */
1279 }
1280
1281
1282 /*
1283  * Setup the w100 clocks for the specified mode
1284  */
1285 static void w100_init_clocks(struct w100fb_par *par)
1286 {
1287         struct w100_mode *mode = par->mode;
1288
1289         if (mode->pixclk_src == CLK_SRC_PLL || mode->sysclk_src == CLK_SRC_PLL)
1290                 w100_set_pll_freq(par, (par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq);
1291
1292         w100_pwr_state.sclk_cntl.f.sclk_src_sel = mode->sysclk_src;
1293         w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = mode->sysclk_divider;
1294         w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = mode->sysclk_divider;
1295         writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
1296 }
1297
1298 static void w100_init_lcd(struct w100fb_par *par)
1299 {
1300         u32 temp32;
1301         struct w100_mode *mode = par->mode;
1302         struct w100_gen_regs *regs = par->mach->regs;
1303         union active_h_disp_u active_h_disp;
1304         union active_v_disp_u active_v_disp;
1305         union graphic_h_disp_u graphic_h_disp;
1306         union graphic_v_disp_u graphic_v_disp;
1307         union crtc_total_u crtc_total;
1308
1309         /* w3200 doesn't like undefined bits being set so zero register values first */
1310
1311         active_h_disp.val = 0;
1312         active_h_disp.f.active_h_start=mode->left_margin;
1313         active_h_disp.f.active_h_end=mode->left_margin + mode->xres;
1314         writel(active_h_disp.val, remapped_regs + mmACTIVE_H_DISP);
1315
1316         active_v_disp.val = 0;
1317         active_v_disp.f.active_v_start=mode->upper_margin;
1318         active_v_disp.f.active_v_end=mode->upper_margin + mode->yres;
1319         writel(active_v_disp.val, remapped_regs + mmACTIVE_V_DISP);
1320
1321         graphic_h_disp.val = 0;
1322         graphic_h_disp.f.graphic_h_start=mode->left_margin;
1323         graphic_h_disp.f.graphic_h_end=mode->left_margin + mode->xres;
1324         writel(graphic_h_disp.val, remapped_regs + mmGRAPHIC_H_DISP);
1325
1326         graphic_v_disp.val = 0;
1327         graphic_v_disp.f.graphic_v_start=mode->upper_margin;
1328         graphic_v_disp.f.graphic_v_end=mode->upper_margin + mode->yres;
1329         writel(graphic_v_disp.val, remapped_regs + mmGRAPHIC_V_DISP);
1330
1331         crtc_total.val = 0;
1332         crtc_total.f.crtc_h_total=mode->left_margin  + mode->xres + mode->right_margin;
1333         crtc_total.f.crtc_v_total=mode->upper_margin + mode->yres + mode->lower_margin;
1334         writel(crtc_total.val, remapped_regs + mmCRTC_TOTAL);
1335
1336         writel(mode->crtc_ss, remapped_regs + mmCRTC_SS);
1337         writel(mode->crtc_ls, remapped_regs + mmCRTC_LS);
1338         writel(mode->crtc_gs, remapped_regs + mmCRTC_GS);
1339         writel(mode->crtc_vpos_gs, remapped_regs + mmCRTC_VPOS_GS);
1340         writel(mode->crtc_rev, remapped_regs + mmCRTC_REV);
1341         writel(mode->crtc_dclk, remapped_regs + mmCRTC_DCLK);
1342         writel(mode->crtc_gclk, remapped_regs + mmCRTC_GCLK);
1343         writel(mode->crtc_goe, remapped_regs + mmCRTC_GOE);
1344         writel(mode->crtc_ps1_active, remapped_regs + mmCRTC_PS1_ACTIVE);
1345
1346         writel(regs->lcd_format, remapped_regs + mmLCD_FORMAT);
1347         writel(regs->lcdd_cntl1, remapped_regs + mmLCDD_CNTL1);
1348         writel(regs->lcdd_cntl2, remapped_regs + mmLCDD_CNTL2);
1349         writel(regs->genlcd_cntl1, remapped_regs + mmGENLCD_CNTL1);
1350         writel(regs->genlcd_cntl2, remapped_regs + mmGENLCD_CNTL2);
1351         writel(regs->genlcd_cntl3, remapped_regs + mmGENLCD_CNTL3);
1352
1353         writel(0x00000000, remapped_regs + mmCRTC_FRAME);
1354         writel(0x00000000, remapped_regs + mmCRTC_FRAME_VPOS);
1355         writel(0x00000000, remapped_regs + mmCRTC_DEFAULT_COUNT);
1356         writel(0x0000FF00, remapped_regs + mmLCD_BACKGROUND_COLOR);
1357
1358         /* Hack for overlay in ext memory */
1359         temp32 = readl(remapped_regs + mmDISP_DEBUG2);
1360         temp32 |= 0xc0000000;
1361         writel(temp32, remapped_regs + mmDISP_DEBUG2);
1362 }
1363
1364
1365 static void w100_setup_memory(struct w100fb_par *par)
1366 {
1367         union mc_ext_mem_location_u extmem_location;
1368         union mc_fb_location_u intmem_location;
1369         struct w100_mem_info *mem = par->mach->mem;
1370         struct w100_bm_mem_info *bm_mem = par->mach->bm_mem;
1371
1372         if (!par->extmem_active) {
1373                 w100_suspend(W100_SUSPEND_EXTMEM);
1374
1375                 /* Map Internal Memory at FB Base */
1376                 intmem_location.f.mc_fb_start = W100_FB_BASE >> 8;
1377                 intmem_location.f.mc_fb_top = (W100_FB_BASE+MEM_INT_SIZE) >> 8;
1378                 writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
1379
1380                 /* Unmap External Memory - value is *probably* irrelevant but may have meaning
1381                    to acceleration libraries */
1382                 extmem_location.f.mc_ext_mem_start = MEM_EXT_BASE_VALUE >> 8;
1383                 extmem_location.f.mc_ext_mem_top = (MEM_EXT_BASE_VALUE-1) >> 8;
1384                 writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
1385         } else {
1386                 /* Map Internal Memory to its default location */
1387                 intmem_location.f.mc_fb_start = MEM_INT_BASE_VALUE >> 8;
1388                 intmem_location.f.mc_fb_top = (MEM_INT_BASE_VALUE+MEM_INT_SIZE) >> 8;
1389                 writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
1390
1391                 /* Map External Memory at FB Base */
1392                 extmem_location.f.mc_ext_mem_start = W100_FB_BASE >> 8;
1393                 extmem_location.f.mc_ext_mem_top = (W100_FB_BASE+par->mach->mem->size) >> 8;
1394                 writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
1395
1396                 writel(0x00007800, remapped_regs + mmMC_BIST_CTRL);
1397                 writel(mem->ext_cntl, remapped_regs + mmMEM_EXT_CNTL);
1398                 writel(0x00200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
1399                 udelay(100);
1400                 writel(0x80200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
1401                 udelay(100);
1402                 writel(mem->sdram_mode_reg, remapped_regs + mmMEM_SDRAM_MODE_REG);
1403                 udelay(100);
1404                 writel(mem->ext_timing_cntl, remapped_regs + mmMEM_EXT_TIMING_CNTL);
1405                 writel(mem->io_cntl, remapped_regs + mmMEM_IO_CNTL);
1406                 if (bm_mem) {
1407                         writel(bm_mem->ext_mem_bw, remapped_regs + mmBM_EXT_MEM_BANDWIDTH);
1408                         writel(bm_mem->offset, remapped_regs + mmBM_OFFSET);
1409                         writel(bm_mem->ext_timing_ctl, remapped_regs + mmBM_MEM_EXT_TIMING_CNTL);
1410                         writel(bm_mem->ext_cntl, remapped_regs + mmBM_MEM_EXT_CNTL);
1411                         writel(bm_mem->mode_reg, remapped_regs + mmBM_MEM_MODE_REG);
1412                         writel(bm_mem->io_cntl, remapped_regs + mmBM_MEM_IO_CNTL);
1413                         writel(bm_mem->config, remapped_regs + mmBM_CONFIG);
1414                 }
1415         }
1416 }
1417
1418 static void w100_set_dispregs(struct w100fb_par *par)
1419 {
1420         unsigned long rot=0, divider, offset=0;
1421         union graphic_ctrl_u graphic_ctrl;
1422
1423         /* See if the mode has been rotated */
1424         if (par->xres == par->mode->xres) {
1425                 if (par->flip) {
1426                         rot=3; /* 180 degree */
1427                         offset=(par->xres * par->yres) - 1;
1428                 } /* else 0 degree */
1429                 divider = par->mode->pixclk_divider;
1430         } else {
1431                 if (par->flip) {
1432                         rot=2; /* 270 degree */
1433                         offset=par->xres - 1;
1434                 } else {
1435                         rot=1; /* 90 degree */
1436                         offset=par->xres * (par->yres - 1);
1437                 }
1438                 divider = par->mode->pixclk_divider_rotated;
1439         }
1440
1441         graphic_ctrl.val = 0; /* w32xx doesn't like undefined bits */
1442         switch (par->chip_id) {
1443                 case CHIP_ID_W100:
1444                         graphic_ctrl.f_w100.color_depth=6;
1445                         graphic_ctrl.f_w100.en_crtc=1;
1446                         graphic_ctrl.f_w100.en_graphic_req=1;
1447                         graphic_ctrl.f_w100.en_graphic_crtc=1;
1448                         graphic_ctrl.f_w100.lcd_pclk_on=1;
1449                         graphic_ctrl.f_w100.lcd_sclk_on=1;
1450                         graphic_ctrl.f_w100.low_power_on=0;
1451                         graphic_ctrl.f_w100.req_freq=0;
1452                         graphic_ctrl.f_w100.portrait_mode=rot;
1453
1454                         /* Zaurus needs this */
1455                         switch(par->xres) {
1456                                 case 240:
1457                                 case 320:
1458                                 default:
1459                                         graphic_ctrl.f_w100.total_req_graphic=0xa0;
1460                                         break;
1461                                 case 480:
1462                                 case 640:
1463                                         switch(rot) {
1464                                                 case 0:  /* 0 */
1465                                                 case 3:  /* 180 */
1466                                                         graphic_ctrl.f_w100.low_power_on=1;
1467                                                         graphic_ctrl.f_w100.req_freq=5;
1468                                                 break;
1469                                                 case 1:  /* 90 */
1470                                                 case 2:  /* 270 */
1471                                                         graphic_ctrl.f_w100.req_freq=4;
1472                                                         break;
1473                                                 default:
1474                                                         break;
1475                                         }
1476                                         graphic_ctrl.f_w100.total_req_graphic=0xf0;
1477                                         break;
1478                         }
1479                         break;
1480                 case CHIP_ID_W3200:
1481                 case CHIP_ID_W3220:
1482                         graphic_ctrl.f_w32xx.color_depth=6;
1483                         graphic_ctrl.f_w32xx.en_crtc=1;
1484                         graphic_ctrl.f_w32xx.en_graphic_req=1;
1485                         graphic_ctrl.f_w32xx.en_graphic_crtc=1;
1486                         graphic_ctrl.f_w32xx.lcd_pclk_on=1;
1487                         graphic_ctrl.f_w32xx.lcd_sclk_on=1;
1488                         graphic_ctrl.f_w32xx.low_power_on=0;
1489                         graphic_ctrl.f_w32xx.req_freq=0;
1490                         graphic_ctrl.f_w32xx.total_req_graphic=par->mode->xres >> 1; /* panel xres, not mode */
1491                         graphic_ctrl.f_w32xx.portrait_mode=rot;
1492                         break;
1493         }
1494
1495         /* Set the pixel clock source and divider */
1496         w100_pwr_state.pclk_cntl.f.pclk_src_sel = par->mode->pixclk_src;
1497         w100_pwr_state.pclk_cntl.f.pclk_post_div = divider;
1498         writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
1499
1500         writel(graphic_ctrl.val, remapped_regs + mmGRAPHIC_CTRL);
1501         writel(W100_FB_BASE + ((offset * BITS_PER_PIXEL/8)&~0x03UL), remapped_regs + mmGRAPHIC_OFFSET);
1502         writel((par->xres*BITS_PER_PIXEL/8), remapped_regs + mmGRAPHIC_PITCH);
1503 }
1504
1505
1506 /*
1507  * Work out how long the sync pulse lasts
1508  * Value is 1/(time in seconds)
1509  */
1510 static void calc_hsync(struct w100fb_par *par)
1511 {
1512         unsigned long hsync;
1513         struct w100_mode *mode = par->mode;
1514         union crtc_ss_u crtc_ss;
1515
1516         if (mode->pixclk_src == CLK_SRC_XTAL)
1517                 hsync=par->mach->xtal_freq;
1518         else
1519                 hsync=((par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq)*100000;
1520
1521         hsync /= (w100_pwr_state.pclk_cntl.f.pclk_post_div + 1);
1522
1523         crtc_ss.val = readl(remapped_regs + mmCRTC_SS);
1524         if (crtc_ss.val)
1525                 par->hsync_len = hsync / (crtc_ss.f.ss_end-crtc_ss.f.ss_start);
1526         else
1527                 par->hsync_len = 0;
1528 }
1529
1530 static void w100_suspend(u32 mode)
1531 {
1532         u32 val;
1533
1534         writel(0x7FFF8000, remapped_regs + mmMC_EXT_MEM_LOCATION);
1535         writel(0x00FF0000, remapped_regs + mmMC_PERF_MON_CNTL);
1536
1537         val = readl(remapped_regs + mmMEM_EXT_TIMING_CNTL);
1538         val &= ~(0x00100000);  /* bit20=0 */
1539         val |= 0xFF000000;     /* bit31:24=0xff */
1540         writel(val, remapped_regs + mmMEM_EXT_TIMING_CNTL);
1541
1542         val = readl(remapped_regs + mmMEM_EXT_CNTL);
1543         val &= ~(0x00040000);  /* bit18=0 */
1544         val |= 0x00080000;     /* bit19=1 */
1545         writel(val, remapped_regs + mmMEM_EXT_CNTL);
1546
1547         udelay(1);  /* wait 1us */
1548
1549         if (mode == W100_SUSPEND_EXTMEM) {
1550                 /* CKE: Tri-State */
1551                 val = readl(remapped_regs + mmMEM_EXT_CNTL);
1552                 val |= 0x40000000;  /* bit30=1 */
1553                 writel(val, remapped_regs + mmMEM_EXT_CNTL);
1554
1555                 /* CLK: Stop */
1556                 val = readl(remapped_regs + mmMEM_EXT_CNTL);
1557                 val &= ~(0x00000001);  /* bit0=0 */
1558                 writel(val, remapped_regs + mmMEM_EXT_CNTL);
1559         } else {
1560                 writel(0x00000000, remapped_regs + mmSCLK_CNTL);
1561                 writel(0x000000BF, remapped_regs + mmCLK_PIN_CNTL);
1562                 writel(0x00000015, remapped_regs + mmPWRMGT_CNTL);
1563
1564                 udelay(5);
1565
1566                 val = readl(remapped_regs + mmPLL_CNTL);
1567                 val |= 0x00000004;  /* bit2=1 */
1568                 writel(val, remapped_regs + mmPLL_CNTL);
1569
1570                 writel(0x00000000, remapped_regs + mmLCDD_CNTL1);
1571                 writel(0x00000000, remapped_regs + mmLCDD_CNTL2);
1572                 writel(0x00000000, remapped_regs + mmGENLCD_CNTL1);
1573                 writel(0x00000000, remapped_regs + mmGENLCD_CNTL2);
1574                 writel(0x00000000, remapped_regs + mmGENLCD_CNTL3);
1575
1576                 val = readl(remapped_regs + mmMEM_EXT_CNTL);
1577                 val |= 0xF0000000;
1578                 val &= ~(0x00000001);
1579                 writel(val, remapped_regs + mmMEM_EXT_CNTL);
1580
1581                 writel(0x0000001d, remapped_regs + mmPWRMGT_CNTL);
1582         }
1583 }
1584
1585 static void w100_vsync(void)
1586 {
1587         u32 tmp;
1588         int timeout = 30000;  /* VSync timeout = 30[ms] > 16.8[ms] */
1589
1590         tmp = readl(remapped_regs + mmACTIVE_V_DISP);
1591
1592         /* set vline pos  */
1593         writel((tmp >> 16) & 0x3ff, remapped_regs + mmDISP_INT_CNTL);
1594
1595         /* disable vline irq */
1596         tmp = readl(remapped_regs + mmGEN_INT_CNTL);
1597
1598         tmp &= ~0x00000002;
1599         writel(tmp, remapped_regs + mmGEN_INT_CNTL);
1600
1601         /* clear vline irq status */
1602         writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
1603
1604         /* enable vline irq */
1605         writel((tmp | 0x00000002), remapped_regs + mmGEN_INT_CNTL);
1606
1607         /* clear vline irq status */
1608         writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
1609
1610         while(timeout > 0) {
1611                 if (readl(remapped_regs + mmGEN_INT_STATUS) & 0x00000002)
1612                         break;
1613                 udelay(1);
1614                 timeout--;
1615         }
1616
1617         /* disable vline irq */
1618         writel(tmp, remapped_regs + mmGEN_INT_CNTL);
1619
1620         /* clear vline irq status */
1621         writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
1622 }
1623
1624 static struct platform_driver w100fb_driver = {
1625         .probe          = w100fb_probe,
1626         .remove         = w100fb_remove,
1627         .suspend        = w100fb_suspend,
1628         .resume         = w100fb_resume,
1629         .driver         = {
1630                 .name   = "w100fb",
1631         },
1632 };
1633
1634 module_platform_driver(w100fb_driver);
1635
1636 MODULE_DESCRIPTION("ATI Imageon w100 framebuffer driver");
1637 MODULE_LICENSE("GPL");