Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / video / fbdev / omap / lcd_osk.c
1 /*
2  * LCD panel support for the TI OMAP OSK board
3  *
4  * Copyright (C) 2004 Nokia Corporation
5  * Author: Imre Deak <imre.deak@nokia.com>
6  * Adapted for OSK by <dirk.behme@de.bosch.com>
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of the GNU General Public License as published by the
10  * Free Software Foundation; either version 2 of the License, or (at your
11  * option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License along
19  * with this program; if not, write to the Free Software Foundation, Inc.,
20  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
21  */
22
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25
26 #include <asm/gpio.h>
27
28 #include <mach/hardware.h>
29 #include <mach/mux.h>
30
31 #include "omapfb.h"
32
33 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
34 {
35         /* gpio2 was allocated in board init */
36         return 0;
37 }
38
39 static void osk_panel_cleanup(struct lcd_panel *panel)
40 {
41 }
42
43 static int osk_panel_enable(struct lcd_panel *panel)
44 {
45         /* configure PWL pin */
46         omap_cfg_reg(PWL);
47
48         /* Enable PWL unit */
49         omap_writeb(0x01, OMAP_PWL_CLK_ENABLE);
50
51         /* Set PWL level */
52         omap_writeb(0xFF, OMAP_PWL_ENABLE);
53
54         /* set GPIO2 high (lcd power enabled) */
55         gpio_set_value(2, 1);
56
57         return 0;
58 }
59
60 static void osk_panel_disable(struct lcd_panel *panel)
61 {
62         /* Set PWL level to zero */
63         omap_writeb(0x00, OMAP_PWL_ENABLE);
64
65         /* Disable PWL unit */
66         omap_writeb(0x00, OMAP_PWL_CLK_ENABLE);
67
68         /* set GPIO2 low */
69         gpio_set_value(2, 0);
70 }
71
72 static unsigned long osk_panel_get_caps(struct lcd_panel *panel)
73 {
74         return 0;
75 }
76
77 struct lcd_panel osk_panel = {
78         .name           = "osk",
79         .config         = OMAP_LCDC_PANEL_TFT,
80
81         .bpp            = 16,
82         .data_lines     = 16,
83         .x_res          = 240,
84         .y_res          = 320,
85         .pixel_clock    = 12500,
86         .hsw            = 40,
87         .hfp            = 40,
88         .hbp            = 72,
89         .vsw            = 1,
90         .vfp            = 1,
91         .vbp            = 0,
92         .pcd            = 12,
93
94         .init           = osk_panel_init,
95         .cleanup        = osk_panel_cleanup,
96         .enable         = osk_panel_enable,
97         .disable        = osk_panel_disable,
98         .get_caps       = osk_panel_get_caps,
99 };
100
101 static int osk_panel_probe(struct platform_device *pdev)
102 {
103         omapfb_register_panel(&osk_panel);
104         return 0;
105 }
106
107 static int osk_panel_remove(struct platform_device *pdev)
108 {
109         return 0;
110 }
111
112 static int osk_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
113 {
114         return 0;
115 }
116
117 static int osk_panel_resume(struct platform_device *pdev)
118 {
119         return 0;
120 }
121
122 static struct platform_driver osk_panel_driver = {
123         .probe          = osk_panel_probe,
124         .remove         = osk_panel_remove,
125         .suspend        = osk_panel_suspend,
126         .resume         = osk_panel_resume,
127         .driver         = {
128                 .name   = "lcd_osk",
129         },
130 };
131
132 module_platform_driver(osk_panel_driver);