kernel/drivers/video/fbdev/intelfb/intelfbhw.c

   1 /*
   2  * intelfb
   3  *
   4  * Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
   5  *
   6  * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
   7  *                   2004 Sylvain Meyer
   8  *
   9  * This driver consists of two parts.  The first part (intelfbdrv.c) provides
  10  * the basic fbdev interfaces, is derived in part from the radeonfb and
  11  * vesafb drivers, and is covered by the GPL.  The second part (intelfbhw.c)
  12  * provides the code to program the hardware.  Most of it is derived from
  13  * the i810/i830 XFree86 driver.  The HW-specific code is covered here
  14  * under a dual license (GPL and MIT/XFree86 license).
  15  *
  16  * Author: David Dawes
  17  *
  18  */
  19
  20 /* $DHD: intelfb/intelfbhw.c,v 1.9 2003/06/27 15:06:25 dawes Exp $ */
  21
  22 #include <linux/module.h>
  23 #include <linux/kernel.h>
  24 #include <linux/errno.h>
  25 #include <linux/string.h>
  26 #include <linux/mm.h>
  27 #include <linux/delay.h>
  28 #include <linux/fb.h>
  29 #include <linux/ioport.h>
  30 #include <linux/init.h>
  31 #include <linux/pci.h>
  32 #include <linux/vmalloc.h>
  33 #include <linux/pagemap.h>
  34 #include <linux/interrupt.h>
  35
  36 #include <asm/io.h>
  37
  38 #include "intelfb.h"
  39 #include "intelfbhw.h"
  40
  41 struct pll_min_max {
  42         int min_m, max_m, min_m1, max_m1;
  43         int min_m2, max_m2, min_n, max_n;
  44         int min_p, max_p, min_p1, max_p1;
  45         int min_vco, max_vco, p_transition_clk, ref_clk;
  46         int p_inc_lo, p_inc_hi;
  47 };
  48
  49 #define PLLS_I8xx 0
  50 #define PLLS_I9xx 1
  51 #define PLLS_MAX 2
  52
  53 static struct pll_min_max plls[PLLS_MAX] = {
  54         { 108, 140, 18, 26,
  55           6, 16, 3, 16,
  56           4, 128, 0, 31,
  57           930000, 1400000, 165000, 48000,
  58           4, 2 },               /* I8xx */
  59
  60         { 75, 120, 10, 20,
  61           5, 9, 4, 7,
  62           5, 80, 1, 8,
  63           1400000, 2800000, 200000, 96000,
  64           10, 5 }               /* I9xx */
  65 };
  66
  67 int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
  68 {
  69         u32 tmp;
  70         if (!pdev || !dinfo)
  71                 return 1;
  72
  73         switch (pdev->device) {
  74         case PCI_DEVICE_ID_INTEL_830M:
  75                 dinfo->name = "Intel(R) 830M";
  76                 dinfo->chipset = INTEL_830M;
  77                 dinfo->mobile = 1;
  78                 dinfo->pll_index = PLLS_I8xx;
  79                 return 0;
  80         case PCI_DEVICE_ID_INTEL_845G:
  81                 dinfo->name = "Intel(R) 845G";
  82                 dinfo->chipset = INTEL_845G;
  83                 dinfo->mobile = 0;
  84                 dinfo->pll_index = PLLS_I8xx;
  85                 return 0;
  86         case PCI_DEVICE_ID_INTEL_854:
  87                 dinfo->mobile = 1;
  88                 dinfo->name = "Intel(R) 854";
  89                 dinfo->chipset = INTEL_854;
  90                 return 0;
  91         case PCI_DEVICE_ID_INTEL_85XGM:
  92                 tmp = 0;
  93                 dinfo->mobile = 1;
  94                 dinfo->pll_index = PLLS_I8xx;
  95                 pci_read_config_dword(pdev, INTEL_85X_CAPID, &tmp);
  96                 switch ((tmp >> INTEL_85X_VARIANT_SHIFT) &
  97                         INTEL_85X_VARIANT_MASK) {
  98                 case INTEL_VAR_855GME:
  99                         dinfo->name = "Intel(R) 855GME";
 100                         dinfo->chipset = INTEL_855GME;
 101                         return 0;
 102                 case INTEL_VAR_855GM:
 103                         dinfo->name = "Intel(R) 855GM";
 104                         dinfo->chipset = INTEL_855GM;
 105                         return 0;
 106                 case INTEL_VAR_852GME:
 107                         dinfo->name = "Intel(R) 852GME";
 108                         dinfo->chipset = INTEL_852GME;
 109                         return 0;
 110                 case INTEL_VAR_852GM:
 111                         dinfo->name = "Intel(R) 852GM";
 112                         dinfo->chipset = INTEL_852GM;
 113                         return 0;
 114                 default:
 115                         dinfo->name = "Intel(R) 852GM/855GM";
 116                         dinfo->chipset = INTEL_85XGM;
 117                         return 0;
 118                 }
 119                 break;
 120         case PCI_DEVICE_ID_INTEL_865G:
 121                 dinfo->name = "Intel(R) 865G";
 122                 dinfo->chipset = INTEL_865G;
 123                 dinfo->mobile = 0;
 124                 dinfo->pll_index = PLLS_I8xx;
 125                 return 0;
 126         case PCI_DEVICE_ID_INTEL_915G:
 127                 dinfo->name = "Intel(R) 915G";
 128                 dinfo->chipset = INTEL_915G;
 129                 dinfo->mobile = 0;
 130                 dinfo->pll_index = PLLS_I9xx;
 131                 return 0;
 132         case PCI_DEVICE_ID_INTEL_915GM:
 133                 dinfo->name = "Intel(R) 915GM";
 134                 dinfo->chipset = INTEL_915GM;
 135                 dinfo->mobile = 1;
 136                 dinfo->pll_index = PLLS_I9xx;
 137                 return 0;
 138         case PCI_DEVICE_ID_INTEL_945G:
 139                 dinfo->name = "Intel(R) 945G";
 140                 dinfo->chipset = INTEL_945G;
 141                 dinfo->mobile = 0;
 142                 dinfo->pll_index = PLLS_I9xx;
 143                 return 0;
 144         case PCI_DEVICE_ID_INTEL_945GM:
 145                 dinfo->name = "Intel(R) 945GM";
 146                 dinfo->chipset = INTEL_945GM;
 147                 dinfo->mobile = 1;
 148                 dinfo->pll_index = PLLS_I9xx;
 149                 return 0;
 150         case PCI_DEVICE_ID_INTEL_945GME:
 151                 dinfo->name = "Intel(R) 945GME";
 152                 dinfo->chipset = INTEL_945GME;
 153                 dinfo->mobile = 1;
 154                 dinfo->pll_index = PLLS_I9xx;
 155                 return 0;
 156         case PCI_DEVICE_ID_INTEL_965G:
 157                 dinfo->name = "Intel(R) 965G";
 158                 dinfo->chipset = INTEL_965G;
 159                 dinfo->mobile = 0;
 160                 dinfo->pll_index = PLLS_I9xx;
 161                 return 0;
 162         case PCI_DEVICE_ID_INTEL_965GM:
 163                 dinfo->name = "Intel(R) 965GM";
 164                 dinfo->chipset = INTEL_965GM;
 165                 dinfo->mobile = 1;
 166                 dinfo->pll_index = PLLS_I9xx;
 167                 return 0;
 168         default:
 169                 return 1;
 170         }
 171 }
 172
 173 int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 174                          int *stolen_size)
 175 {
 176         struct pci_dev *bridge_dev;
 177         u16 tmp;
 178         int stolen_overhead;
 179
 180         if (!pdev || !aperture_size || !stolen_size)
 181                 return 1;
 182
 183         /* Find the bridge device.  It is always 0:0.0 */
 184         if (!(bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)))) {
 185                 ERR_MSG("cannot find bridge device\n");
 186                 return 1;
 187         }
 188
 189         /* Get the fb aperture size and "stolen" memory amount. */
 190         tmp = 0;
 191         pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
 192         pci_dev_put(bridge_dev);
 193
 194         switch (pdev->device) {
 195         case PCI_DEVICE_ID_INTEL_915G:
 196         case PCI_DEVICE_ID_INTEL_915GM:
 197         case PCI_DEVICE_ID_INTEL_945G:
 198         case PCI_DEVICE_ID_INTEL_945GM:
 199         case PCI_DEVICE_ID_INTEL_945GME:
 200         case PCI_DEVICE_ID_INTEL_965G:
 201         case PCI_DEVICE_ID_INTEL_965GM:
 202                 /* 915, 945 and 965 chipsets support a 256MB aperture.
 203                    Aperture size is determined by inspected the
 204                    base address of the aperture. */
 205                 if (pci_resource_start(pdev, 2) & 0x08000000)
 206                         *aperture_size = MB(128);
 207                 else
 208                         *aperture_size = MB(256);
 209                 break;
 210         default:
 211                 if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
 212                         *aperture_size = MB(64);
 213                 else
 214                         *aperture_size = MB(128);
 215                 break;
 216         }
 217
 218         /* Stolen memory size is reduced by the GTT and the popup.
 219            GTT is 1K per MB of aperture size, and popup is 4K. */
 220         stolen_overhead = (*aperture_size / MB(1)) + 4;
 221         switch(pdev->device) {
 222         case PCI_DEVICE_ID_INTEL_830M:
 223         case PCI_DEVICE_ID_INTEL_845G:
 224                 switch (tmp & INTEL_830_GMCH_GMS_MASK) {
 225                 case INTEL_830_GMCH_GMS_STOLEN_512:
 226                         *stolen_size = KB(512) - KB(stolen_overhead);
 227                         return 0;
 228                 case INTEL_830_GMCH_GMS_STOLEN_1024:
 229                         *stolen_size = MB(1) - KB(stolen_overhead);
 230                         return 0;
 231                 case INTEL_830_GMCH_GMS_STOLEN_8192:
 232                         *stolen_size = MB(8) - KB(stolen_overhead);
 233                         return 0;
 234                 case INTEL_830_GMCH_GMS_LOCAL:
 235                         ERR_MSG("only local memory found\n");
 236                         return 1;
 237                 case INTEL_830_GMCH_GMS_DISABLED:
 238                         ERR_MSG("video memory is disabled\n");
 239                         return 1;
 240                 default:
 241                         ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
 242                                 tmp & INTEL_830_GMCH_GMS_MASK);
 243                         return 1;
 244                 }
 245                 break;
 246         default:
 247                 switch (tmp & INTEL_855_GMCH_GMS_MASK) {
 248                 case INTEL_855_GMCH_GMS_STOLEN_1M:
 249                         *stolen_size = MB(1) - KB(stolen_overhead);
 250                         return 0;
 251                 case INTEL_855_GMCH_GMS_STOLEN_4M:
 252                         *stolen_size = MB(4) - KB(stolen_overhead);
 253                         return 0;
 254                 case INTEL_855_GMCH_GMS_STOLEN_8M:
 255                         *stolen_size = MB(8) - KB(stolen_overhead);
 256                         return 0;
 257                 case INTEL_855_GMCH_GMS_STOLEN_16M:
 258                         *stolen_size = MB(16) - KB(stolen_overhead);
 259                         return 0;
 260                 case INTEL_855_GMCH_GMS_STOLEN_32M:
 261                         *stolen_size = MB(32) - KB(stolen_overhead);
 262                         return 0;
 263                 case INTEL_915G_GMCH_GMS_STOLEN_48M:
 264                         *stolen_size = MB(48) - KB(stolen_overhead);
 265                         return 0;
 266                 case INTEL_915G_GMCH_GMS_STOLEN_64M:
 267                         *stolen_size = MB(64) - KB(stolen_overhead);
 268                         return 0;
 269                 case INTEL_855_GMCH_GMS_DISABLED:
 270                         ERR_MSG("video memory is disabled\n");
 271                         return 0;
 272                 default:
 273                         ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
 274                                 tmp & INTEL_855_GMCH_GMS_MASK);
 275                         return 1;
 276                 }
 277         }
 278 }
 279
 280 int intelfbhw_check_non_crt(struct intelfb_info *dinfo)
 281 {
 282         int dvo = 0;
 283
 284         if (INREG(LVDS) & PORT_ENABLE)
 285                 dvo |= LVDS_PORT;
 286         if (INREG(DVOA) & PORT_ENABLE)
 287                 dvo |= DVOA_PORT;
 288         if (INREG(DVOB) & PORT_ENABLE)
 289                 dvo |= DVOB_PORT;
 290         if (INREG(DVOC) & PORT_ENABLE)
 291                 dvo |= DVOC_PORT;
 292
 293         return dvo;
 294 }
 295
 296 const char * intelfbhw_dvo_to_string(int dvo)
 297 {
 298         if (dvo & DVOA_PORT)
 299                 return "DVO port A";
 300         else if (dvo & DVOB_PORT)
 301                 return "DVO port B";
 302         else if (dvo & DVOC_PORT)
 303                 return "DVO port C";
 304         else if (dvo & LVDS_PORT)
 305                 return "LVDS port";
 306         else
 307                 return NULL;
 308 }
 309
 310
 311 int intelfbhw_validate_mode(struct intelfb_info *dinfo,
 312                             struct fb_var_screeninfo *var)
 313 {
 314         int bytes_per_pixel;
 315         int tmp;
 316
 317 #if VERBOSE > 0
 318         DBG_MSG("intelfbhw_validate_mode\n");
 319 #endif
 320
 321         bytes_per_pixel = var->bits_per_pixel / 8;
 322         if (bytes_per_pixel == 3)
 323                 bytes_per_pixel = 4;
 324
 325         /* Check if enough video memory. */
 326         tmp = var->yres_virtual * var->xres_virtual * bytes_per_pixel;
 327         if (tmp > dinfo->fb.size) {
 328                 WRN_MSG("Not enough video ram for mode "
 329                         "(%d KByte vs %d KByte).\n",
 330                         BtoKB(tmp), BtoKB(dinfo->fb.size));
 331                 return 1;
 332         }
 333
 334         /* Check if x/y limits are OK. */
 335         if (var->xres - 1 > HACTIVE_MASK) {
 336                 WRN_MSG("X resolution too large (%d vs %d).\n",
 337                         var->xres, HACTIVE_MASK + 1);
 338                 return 1;
 339         }
 340         if (var->yres - 1 > VACTIVE_MASK) {
 341                 WRN_MSG("Y resolution too large (%d vs %d).\n",
 342                         var->yres, VACTIVE_MASK + 1);
 343                 return 1;
 344         }
 345         if (var->xres < 4) {
 346                 WRN_MSG("X resolution too small (%d vs 4).\n", var->xres);
 347                 return 1;
 348         }
 349         if (var->yres < 4) {
 350                 WRN_MSG("Y resolution too small (%d vs 4).\n", var->yres);
 351                 return 1;
 352         }
 353
 354         /* Check for doublescan modes. */
 355         if (var->vmode & FB_VMODE_DOUBLE) {
 356                 WRN_MSG("Mode is double-scan.\n");
 357                 return 1;
 358         }
 359
 360         if ((var->vmode & FB_VMODE_INTERLACED) && (var->yres & 1)) {
 361                 WRN_MSG("Odd number of lines in interlaced mode\n");
 362                 return 1;
 363         }
 364
 365         /* Check if clock is OK. */
 366         tmp = 1000000000 / var->pixclock;
 367         if (tmp < MIN_CLOCK) {
 368                 WRN_MSG("Pixel clock is too low (%d MHz vs %d MHz).\n",
 369                         (tmp + 500) / 1000, MIN_CLOCK / 1000);
 370                 return 1;
 371         }
 372         if (tmp > MAX_CLOCK) {
 373                 WRN_MSG("Pixel clock is too high (%d MHz vs %d MHz).\n",
 374                         (tmp + 500) / 1000, MAX_CLOCK / 1000);
 375                 return 1;
 376         }
 377
 378         return 0;
 379 }
 380
 381 int intelfbhw_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 382 {
 383         struct intelfb_info *dinfo = GET_DINFO(info);
 384         u32 offset, xoffset, yoffset;
 385
 386 #if VERBOSE > 0
 387         DBG_MSG("intelfbhw_pan_display\n");
 388 #endif
 389
 390         xoffset = ROUND_DOWN_TO(var->xoffset, 8);
 391         yoffset = var->yoffset;
 392
 393         if ((xoffset + info->var.xres > info->var.xres_virtual) ||
 394             (yoffset + info->var.yres > info->var.yres_virtual))
 395                 return -EINVAL;
 396
 397         offset = (yoffset * dinfo->pitch) +
 398                  (xoffset * info->var.bits_per_pixel) / 8;
 399
 400         offset += dinfo->fb.offset << 12;
 401
 402         dinfo->vsync.pan_offset = offset;
 403         if ((var->activate & FB_ACTIVATE_VBL) &&
 404             !intelfbhw_enable_irq(dinfo))
 405                 dinfo->vsync.pan_display = 1;
 406         else {
 407                 dinfo->vsync.pan_display = 0;
 408                 OUTREG(DSPABASE, offset);
 409         }
 410
 411         return 0;
 412 }
 413
 414 /* Blank the screen. */
 415 void intelfbhw_do_blank(int blank, struct fb_info *info)
 416 {
 417         struct intelfb_info *dinfo = GET_DINFO(info);
 418         u32 tmp;
 419
 420 #if VERBOSE > 0
 421         DBG_MSG("intelfbhw_do_blank: blank is %d\n", blank);
 422 #endif
 423
 424         /* Turn plane A on or off */
 425         tmp = INREG(DSPACNTR);
 426         if (blank)
 427                 tmp &= ~DISPPLANE_PLANE_ENABLE;
 428         else
 429                 tmp |= DISPPLANE_PLANE_ENABLE;
 430         OUTREG(DSPACNTR, tmp);
 431         /* Flush */
 432         tmp = INREG(DSPABASE);
 433         OUTREG(DSPABASE, tmp);
 434
 435         /* Turn off/on the HW cursor */
 436 #if VERBOSE > 0
 437         DBG_MSG("cursor_on is %d\n", dinfo->cursor_on);
 438 #endif
 439         if (dinfo->cursor_on) {
 440                 if (blank)
 441                         intelfbhw_cursor_hide(dinfo);
 442                 else
 443                         intelfbhw_cursor_show(dinfo);
 444                 dinfo->cursor_on = 1;
 445         }
 446         dinfo->cursor_blanked = blank;
 447
 448         /* Set DPMS level */
 449         tmp = INREG(ADPA) & ~ADPA_DPMS_CONTROL_MASK;
 450         switch (blank) {
 451         case FB_BLANK_UNBLANK:
 452         case FB_BLANK_NORMAL:
 453                 tmp |= ADPA_DPMS_D0;
 454                 break;
 455         case FB_BLANK_VSYNC_SUSPEND:
 456                 tmp |= ADPA_DPMS_D1;
 457                 break;
 458         case FB_BLANK_HSYNC_SUSPEND:
 459                 tmp |= ADPA_DPMS_D2;
 460                 break;
 461         case FB_BLANK_POWERDOWN:
 462                 tmp |= ADPA_DPMS_D3;
 463                 break;
 464         }
 465         OUTREG(ADPA, tmp);
 466
 467         return;
 468 }
 469
 470
 471 /* Check which pipe is connected to an active display plane. */
 472 int intelfbhw_active_pipe(const struct intelfb_hwstate *hw)
 473 {
 474         int pipe = -1;
 475
 476         /* keep old default behaviour - prefer PIPE_A */
 477         if (hw->disp_b_ctrl & DISPPLANE_PLANE_ENABLE) {
 478                 pipe = (hw->disp_b_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
 479                 pipe &= PIPE_MASK;
 480                 if (unlikely(pipe == PIPE_A))
 481                         return PIPE_A;
 482         }
 483         if (hw->disp_a_ctrl & DISPPLANE_PLANE_ENABLE) {
 484                 pipe = (hw->disp_a_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
 485                 pipe &= PIPE_MASK;
 486                 if (likely(pipe == PIPE_A))
 487                         return PIPE_A;
 488         }
 489         /* Impossible that no pipe is selected - return PIPE_A */
 490         WARN_ON(pipe == -1);
 491         if (unlikely(pipe == -1))
 492                 pipe = PIPE_A;
 493
 494         return pipe;
 495 }
 496
 497 void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
 498                          unsigned red, unsigned green, unsigned blue,
 499                          unsigned transp)
 500 {
 501         u32 palette_reg = (dinfo->pipe == PIPE_A) ?
 502                           PALETTE_A : PALETTE_B;
 503
 504 #if VERBOSE > 0
 505         DBG_MSG("intelfbhw_setcolreg: %d: (%d, %d, %d)\n",
 506                 regno, red, green, blue);
 507 #endif
 508
 509         OUTREG(palette_reg + (regno << 2),
 510                (red << PALETTE_8_RED_SHIFT) |
 511                (green << PALETTE_8_GREEN_SHIFT) |
 512                (blue << PALETTE_8_BLUE_SHIFT));
 513 }
 514
 515
 516 int intelfbhw_read_hw_state(struct intelfb_info *dinfo,
 517                             struct intelfb_hwstate *hw, int flag)
 518 {
 519         int i;
 520
 521 #if VERBOSE > 0
 522         DBG_MSG("intelfbhw_read_hw_state\n");
 523 #endif
 524
 525         if (!hw || !dinfo)
 526                 return -1;
 527
 528         /* Read in as much of the HW state as possible. */
 529         hw->vga0_divisor = INREG(VGA0_DIVISOR);
 530         hw->vga1_divisor = INREG(VGA1_DIVISOR);
 531         hw->vga_pd = INREG(VGAPD);
 532         hw->dpll_a = INREG(DPLL_A);
 533         hw->dpll_b = INREG(DPLL_B);
 534         hw->fpa0 = INREG(FPA0);
 535         hw->fpa1 = INREG(FPA1);
 536         hw->fpb0 = INREG(FPB0);
 537         hw->fpb1 = INREG(FPB1);
 538
 539         if (flag == 1)
 540                 return flag;
 541
 542 #if 0
 543         /* This seems to be a problem with the 852GM/855GM */
 544         for (i = 0; i < PALETTE_8_ENTRIES; i++) {
 545                 hw->palette_a[i] = INREG(PALETTE_A + (i << 2));
 546                 hw->palette_b[i] = INREG(PALETTE_B + (i << 2));
 547         }
 548 #endif
 549
 550         if (flag == 2)
 551                 return flag;
 552
 553         hw->htotal_a = INREG(HTOTAL_A);
 554         hw->hblank_a = INREG(HBLANK_A);
 555         hw->hsync_a = INREG(HSYNC_A);
 556         hw->vtotal_a = INREG(VTOTAL_A);
 557         hw->vblank_a = INREG(VBLANK_A);
 558         hw->vsync_a = INREG(VSYNC_A);
 559         hw->src_size_a = INREG(SRC_SIZE_A);
 560         hw->bclrpat_a = INREG(BCLRPAT_A);
 561         hw->htotal_b = INREG(HTOTAL_B);
 562         hw->hblank_b = INREG(HBLANK_B);
 563         hw->hsync_b = INREG(HSYNC_B);
 564         hw->vtotal_b = INREG(VTOTAL_B);
 565         hw->vblank_b = INREG(VBLANK_B);
 566         hw->vsync_b = INREG(VSYNC_B);
 567         hw->src_size_b = INREG(SRC_SIZE_B);
 568         hw->bclrpat_b = INREG(BCLRPAT_B);
 569
 570         if (flag == 3)
 571                 return flag;
 572
 573         hw->adpa = INREG(ADPA);
 574         hw->dvoa = INREG(DVOA);
 575         hw->dvob = INREG(DVOB);
 576         hw->dvoc = INREG(DVOC);
 577         hw->dvoa_srcdim = INREG(DVOA_SRCDIM);
 578         hw->dvob_srcdim = INREG(DVOB_SRCDIM);
 579         hw->dvoc_srcdim = INREG(DVOC_SRCDIM);
 580         hw->lvds = INREG(LVDS);
 581
 582         if (flag == 4)
 583                 return flag;
 584
 585         hw->pipe_a_conf = INREG(PIPEACONF);
 586         hw->pipe_b_conf = INREG(PIPEBCONF);
 587         hw->disp_arb = INREG(DISPARB);
 588
 589         if (flag == 5)
 590                 return flag;
 591
 592         hw->cursor_a_control = INREG(CURSOR_A_CONTROL);
 593         hw->cursor_b_control = INREG(CURSOR_B_CONTROL);
 594         hw->cursor_a_base = INREG(CURSOR_A_BASEADDR);
 595         hw->cursor_b_base = INREG(CURSOR_B_BASEADDR);
 596
 597         if (flag == 6)
 598                 return flag;
 599
 600         for (i = 0; i < 4; i++) {
 601                 hw->cursor_a_palette[i] = INREG(CURSOR_A_PALETTE0 + (i << 2));
 602                 hw->cursor_b_palette[i] = INREG(CURSOR_B_PALETTE0 + (i << 2));
 603         }
 604
 605         if (flag == 7)
 606                 return flag;
 607
 608         hw->cursor_size = INREG(CURSOR_SIZE);
 609
 610         if (flag == 8)
 611                 return flag;
 612
 613         hw->disp_a_ctrl = INREG(DSPACNTR);
 614         hw->disp_b_ctrl = INREG(DSPBCNTR);
 615         hw->disp_a_base = INREG(DSPABASE);
 616         hw->disp_b_base = INREG(DSPBBASE);
 617         hw->disp_a_stride = INREG(DSPASTRIDE);
 618         hw->disp_b_stride = INREG(DSPBSTRIDE);
 619
 620         if (flag == 9)
 621                 return flag;
 622
 623         hw->vgacntrl = INREG(VGACNTRL);
 624
 625         if (flag == 10)
 626                 return flag;
 627
 628         hw->add_id = INREG(ADD_ID);
 629
 630         if (flag == 11)
 631                 return flag;
 632
 633         for (i = 0; i < 7; i++) {
 634                 hw->swf0x[i] = INREG(SWF00 + (i << 2));
 635                 hw->swf1x[i] = INREG(SWF10 + (i << 2));
 636                 if (i < 3)
 637                         hw->swf3x[i] = INREG(SWF30 + (i << 2));
 638         }
 639
 640         for (i = 0; i < 8; i++)
 641                 hw->fence[i] = INREG(FENCE + (i << 2));
 642
 643         hw->instpm = INREG(INSTPM);
 644         hw->mem_mode = INREG(MEM_MODE);
 645         hw->fw_blc_0 = INREG(FW_BLC_0);
 646         hw->fw_blc_1 = INREG(FW_BLC_1);
 647
 648         hw->hwstam = INREG16(HWSTAM);
 649         hw->ier = INREG16(IER);
 650         hw->iir = INREG16(IIR);
 651         hw->imr = INREG16(IMR);
 652
 653         return 0;
 654 }
 655
 656
 657 static int calc_vclock3(int index, int m, int n, int p)
 658 {
 659         if (p == 0 || n == 0)
 660                 return 0;
 661         return plls[index].ref_clk * m / n / p;
 662 }
 663
 664 static int calc_vclock(int index, int m1, int m2, int n, int p1, int p2,
 665                        int lvds)
 666 {
 667         struct pll_min_max *pll = &plls[index];
 668         u32 m, vco, p;
 669
 670         m = (5 * (m1 + 2)) + (m2 + 2);
 671         n += 2;
 672         vco = pll->ref_clk * m / n;
 673
 674         if (index == PLLS_I8xx)
 675                 p = ((p1 + 2) * (1 << (p2 + 1)));
 676         else
 677                 p = ((p1) * (p2 ? 5 : 10));
 678         return vco / p;
 679 }
 680
 681 #if REGDUMP
 682 static void intelfbhw_get_p1p2(struct intelfb_info *dinfo, int dpll,
 683                                int *o_p1, int *o_p2)
 684 {
 685         int p1, p2;
 686
 687         if (IS_I9XX(dinfo)) {
 688                 if (dpll & DPLL_P1_FORCE_DIV2)
 689                         p1 = 1;
 690                 else
 691                         p1 = (dpll >> DPLL_P1_SHIFT) & 0xff;
 692
 693                 p1 = ffs(p1);
 694
 695                 p2 = (dpll >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
 696         } else {
 697                 if (dpll & DPLL_P1_FORCE_DIV2)
 698                         p1 = 0;
 699                 else
 700                         p1 = (dpll >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
 701                 p2 = (dpll >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
 702         }
 703
 704         *o_p1 = p1;
 705         *o_p2 = p2;
 706 }
 707 #endif
 708
 709
 710 void intelfbhw_print_hw_state(struct intelfb_info *dinfo,
 711                               struct intelfb_hwstate *hw)
 712 {
 713 #if REGDUMP
 714         int i, m1, m2, n, p1, p2;
 715         int index = dinfo->pll_index;
 716         DBG_MSG("intelfbhw_print_hw_state\n");
 717
 718         if (!hw)
 719                 return;
 720         /* Read in as much of the HW state as possible. */
 721         printk("hw state dump start\n");
 722         printk("        VGA0_DIVISOR:           0x%08x\n", hw->vga0_divisor);
 723         printk("        VGA1_DIVISOR:           0x%08x\n", hw->vga1_divisor);
 724         printk("        VGAPD:                  0x%08x\n", hw->vga_pd);
 725         n = (hw->vga0_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 726         m1 = (hw->vga0_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 727         m2 = (hw->vga0_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 728
 729         intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
 730
 731         printk("        VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 732                m1, m2, n, p1, p2);
 733         printk("        VGA0: clock is %d\n",
 734                calc_vclock(index, m1, m2, n, p1, p2, 0));
 735
 736         n = (hw->vga1_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 737         m1 = (hw->vga1_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 738         m2 = (hw->vga1_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 739
 740         intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
 741         printk("        VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 742                m1, m2, n, p1, p2);
 743         printk("        VGA1: clock is %d\n",
 744                calc_vclock(index, m1, m2, n, p1, p2, 0));
 745
 746         printk("        DPLL_A:                 0x%08x\n", hw->dpll_a);
 747         printk("        DPLL_B:                 0x%08x\n", hw->dpll_b);
 748         printk("        FPA0:                   0x%08x\n", hw->fpa0);
 749         printk("        FPA1:                   0x%08x\n", hw->fpa1);
 750         printk("        FPB0:                   0x%08x\n", hw->fpb0);
 751         printk("        FPB1:                   0x%08x\n", hw->fpb1);
 752
 753         n = (hw->fpa0 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 754         m1 = (hw->fpa0 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 755         m2 = (hw->fpa0 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 756
 757         intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
 758
 759         printk("        PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 760                m1, m2, n, p1, p2);
 761         printk("        PLLA0: clock is %d\n",
 762                calc_vclock(index, m1, m2, n, p1, p2, 0));
 763
 764         n = (hw->fpa1 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 765         m1 = (hw->fpa1 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 766         m2 = (hw->fpa1 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 767
 768         intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
 769
 770         printk("        PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 771                m1, m2, n, p1, p2);
 772         printk("        PLLA1: clock is %d\n",
 773                calc_vclock(index, m1, m2, n, p1, p2, 0));
 774
 775 #if 0
 776         printk("        PALETTE_A:\n");
 777         for (i = 0; i < PALETTE_8_ENTRIES)
 778                 printk("        %3d:    0x%08x\n", i, hw->palette_a[i]);
 779         printk("        PALETTE_B:\n");
 780         for (i = 0; i < PALETTE_8_ENTRIES)
 781                 printk("        %3d:    0x%08x\n", i, hw->palette_b[i]);
 782 #endif
 783
 784         printk("        HTOTAL_A:               0x%08x\n", hw->htotal_a);
 785         printk("        HBLANK_A:               0x%08x\n", hw->hblank_a);
 786         printk("        HSYNC_A:                0x%08x\n", hw->hsync_a);
 787         printk("        VTOTAL_A:               0x%08x\n", hw->vtotal_a);
 788         printk("        VBLANK_A:               0x%08x\n", hw->vblank_a);
 789         printk("        VSYNC_A:                0x%08x\n", hw->vsync_a);
 790         printk("        SRC_SIZE_A:             0x%08x\n", hw->src_size_a);
 791         printk("        BCLRPAT_A:              0x%08x\n", hw->bclrpat_a);
 792         printk("        HTOTAL_B:               0x%08x\n", hw->htotal_b);
 793         printk("        HBLANK_B:               0x%08x\n", hw->hblank_b);
 794         printk("        HSYNC_B:                0x%08x\n", hw->hsync_b);
 795         printk("        VTOTAL_B:               0x%08x\n", hw->vtotal_b);
 796         printk("        VBLANK_B:               0x%08x\n", hw->vblank_b);
 797         printk("        VSYNC_B:                0x%08x\n", hw->vsync_b);
 798         printk("        SRC_SIZE_B:             0x%08x\n", hw->src_size_b);
 799         printk("        BCLRPAT_B:              0x%08x\n", hw->bclrpat_b);
 800
 801         printk("        ADPA:                   0x%08x\n", hw->adpa);
 802         printk("        DVOA:                   0x%08x\n", hw->dvoa);
 803         printk("        DVOB:                   0x%08x\n", hw->dvob);
 804         printk("        DVOC:                   0x%08x\n", hw->dvoc);
 805         printk("        DVOA_SRCDIM:            0x%08x\n", hw->dvoa_srcdim);
 806         printk("        DVOB_SRCDIM:            0x%08x\n", hw->dvob_srcdim);
 807         printk("        DVOC_SRCDIM:            0x%08x\n", hw->dvoc_srcdim);
 808         printk("        LVDS:                   0x%08x\n", hw->lvds);
 809
 810         printk("        PIPEACONF:              0x%08x\n", hw->pipe_a_conf);
 811         printk("        PIPEBCONF:              0x%08x\n", hw->pipe_b_conf);
 812         printk("        DISPARB:                0x%08x\n", hw->disp_arb);
 813
 814         printk("        CURSOR_A_CONTROL:       0x%08x\n", hw->cursor_a_control);
 815         printk("        CURSOR_B_CONTROL:       0x%08x\n", hw->cursor_b_control);
 816         printk("        CURSOR_A_BASEADDR:      0x%08x\n", hw->cursor_a_base);
 817         printk("        CURSOR_B_BASEADDR:      0x%08x\n", hw->cursor_b_base);
 818
 819         printk("        CURSOR_A_PALETTE:       ");
 820         for (i = 0; i < 4; i++) {
 821                 printk("0x%08x", hw->cursor_a_palette[i]);
 822                 if (i < 3)
 823                         printk(", ");
 824         }
 825         printk("\n");
 826         printk("        CURSOR_B_PALETTE:       ");
 827         for (i = 0; i < 4; i++) {
 828                 printk("0x%08x", hw->cursor_b_palette[i]);
 829                 if (i < 3)
 830                         printk(", ");
 831         }
 832         printk("\n");
 833
 834         printk("        CURSOR_SIZE:            0x%08x\n", hw->cursor_size);
 835
 836         printk("        DSPACNTR:               0x%08x\n", hw->disp_a_ctrl);
 837         printk("        DSPBCNTR:               0x%08x\n", hw->disp_b_ctrl);
 838         printk("        DSPABASE:               0x%08x\n", hw->disp_a_base);
 839         printk("        DSPBBASE:               0x%08x\n", hw->disp_b_base);
 840         printk("        DSPASTRIDE:             0x%08x\n", hw->disp_a_stride);
 841         printk("        DSPBSTRIDE:             0x%08x\n", hw->disp_b_stride);
 842
 843         printk("        VGACNTRL:               0x%08x\n", hw->vgacntrl);
 844         printk("        ADD_ID:                 0x%08x\n", hw->add_id);
 845
 846         for (i = 0; i < 7; i++) {
 847                 printk("        SWF0%d                  0x%08x\n", i,
 848                         hw->swf0x[i]);
 849         }
 850         for (i = 0; i < 7; i++) {
 851                 printk("        SWF1%d                  0x%08x\n", i,
 852                         hw->swf1x[i]);
 853         }
 854         for (i = 0; i < 3; i++) {
 855                 printk("        SWF3%d                  0x%08x\n", i,
 856                        hw->swf3x[i]);
 857         }
 858         for (i = 0; i < 8; i++)
 859                 printk("        FENCE%d                 0x%08x\n", i,
 860                        hw->fence[i]);
 861
 862         printk("        INSTPM                  0x%08x\n", hw->instpm);
 863         printk("        MEM_MODE                0x%08x\n", hw->mem_mode);
 864         printk("        FW_BLC_0                0x%08x\n", hw->fw_blc_0);
 865         printk("        FW_BLC_1                0x%08x\n", hw->fw_blc_1);
 866
 867         printk("        HWSTAM                  0x%04x\n", hw->hwstam);
 868         printk("        IER                     0x%04x\n", hw->ier);
 869         printk("        IIR                     0x%04x\n", hw->iir);
 870         printk("        IMR                     0x%04x\n", hw->imr);
 871         printk("hw state dump end\n");
 872 #endif
 873 }
 874
 875
 876
 877 /* Split the M parameter into M1 and M2. */
 878 static int splitm(int index, unsigned int m, unsigned int *retm1,
 879                   unsigned int *retm2)
 880 {
 881         int m1, m2;
 882         int testm;
 883         struct pll_min_max *pll = &plls[index];
 884
 885         /* no point optimising too much - brute force m */
 886         for (m1 = pll->min_m1; m1 < pll->max_m1 + 1; m1++) {
 887                 for (m2 = pll->min_m2; m2 < pll->max_m2 + 1; m2++) {
 888                         testm = (5 * (m1 + 2)) + (m2 + 2);
 889                         if (testm == m) {
 890                                 *retm1 = (unsigned int)m1;
 891                                 *retm2 = (unsigned int)m2;
 892                                 return 0;
 893                         }
 894                 }
 895         }
 896         return 1;
 897 }
 898
 899 /* Split the P parameter into P1 and P2. */
 900 static int splitp(int index, unsigned int p, unsigned int *retp1,
 901                   unsigned int *retp2)
 902 {
 903         int p1, p2;
 904         struct pll_min_max *pll = &plls[index];
 905
 906         if (index == PLLS_I9xx) {
 907                 p2 = (p % 10) ? 1 : 0;
 908
 909                 p1 = p / (p2 ? 5 : 10);
 910
 911                 *retp1 = (unsigned int)p1;
 912                 *retp2 = (unsigned int)p2;
 913                 return 0;
 914         }
 915
 916         if (p % 4 == 0)
 917                 p2 = 1;
 918         else
 919                 p2 = 0;
 920         p1 = (p / (1 << (p2 + 1))) - 2;
 921         if (p % 4 == 0 && p1 < pll->min_p1) {
 922                 p2 = 0;
 923                 p1 = (p / (1 << (p2 + 1))) - 2;
 924         }
 925         if (p1 < pll->min_p1 || p1 > pll->max_p1 ||
 926             (p1 + 2) * (1 << (p2 + 1)) != p) {
 927                 return 1;
 928         } else {
 929                 *retp1 = (unsigned int)p1;
 930                 *retp2 = (unsigned int)p2;
 931                 return 0;
 932         }
 933 }
 934
 935 static int calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2,
 936                            u32 *retn, u32 *retp1, u32 *retp2, u32 *retclock)
 937 {
 938         u32 m1, m2, n, p1, p2, n1, testm;
 939         u32 f_vco, p, p_best = 0, m, f_out = 0;
 940         u32 err_max, err_target, err_best = 10000000;
 941         u32 n_best = 0, m_best = 0, f_best, f_err;
 942         u32 p_min, p_max, p_inc, div_max;
 943         struct pll_min_max *pll = &plls[index];
 944
 945         /* Accept 0.5% difference, but aim for 0.1% */
 946         err_max = 5 * clock / 1000;
 947         err_target = clock / 1000;
 948
 949         DBG_MSG("Clock is %d\n", clock);
 950
 951         div_max = pll->max_vco / clock;
 952
 953         p_inc = (clock <= pll->p_transition_clk) ? pll->p_inc_lo : pll->p_inc_hi;
 954         p_min = p_inc;
 955         p_max = ROUND_DOWN_TO(div_max, p_inc);
 956         if (p_min < pll->min_p)
 957                 p_min = pll->min_p;
 958         if (p_max > pll->max_p)
 959                 p_max = pll->max_p;
 960
 961         DBG_MSG("p range is %d-%d (%d)\n", p_min, p_max, p_inc);
 962
 963         p = p_min;
 964         do {
 965                 if (splitp(index, p, &p1, &p2)) {
 966                         WRN_MSG("cannot split p = %d\n", p);
 967                         p += p_inc;
 968                         continue;
 969                 }
 970                 n = pll->min_n;
 971                 f_vco = clock * p;
 972
 973                 do {
 974                         m = ROUND_UP_TO(f_vco * n, pll->ref_clk) / pll->ref_clk;
 975                         if (m < pll->min_m)
 976                                 m = pll->min_m + 1;
 977                         if (m > pll->max_m)
 978                                 m = pll->max_m - 1;
 979                         for (testm = m - 1; testm <= m; testm++) {
 980                                 f_out = calc_vclock3(index, testm, n, p);
 981                                 if (splitm(index, testm, &m1, &m2)) {
 982                                         WRN_MSG("cannot split m = %d\n",
 983                                                 testm);
 984                                         continue;
 985                                 }
 986                                 if (clock > f_out)
 987                                         f_err = clock - f_out;
 988                                 else/* slightly bias the error for bigger clocks */
 989                                         f_err = f_out - clock + 1;
 990
 991                                 if (f_err < err_best) {
 992                                         m_best = testm;
 993                                         n_best = n;
 994                                         p_best = p;
 995                                         f_best = f_out;
 996                                         err_best = f_err;
 997                                 }
 998                         }
 999                         n++;
1000                 } while ((n <= pll->max_n) && (f_out >= clock));
1001                 p += p_inc;
1002         } while ((p <= p_max));
1003
1004         if (!m_best) {
1005                 WRN_MSG("cannot find parameters for clock %d\n", clock);
1006                 return 1;
1007         }
1008         m = m_best;
1009         n = n_best;
1010         p = p_best;
1011         splitm(index, m, &m1, &m2);
1012         splitp(index, p, &p1, &p2);
1013         n1 = n - 2;
1014
1015         DBG_MSG("m, n, p: %d (%d,%d), %d (%d), %d (%d,%d), "
1016                 "f: %d (%d), VCO: %d\n",
1017                 m, m1, m2, n, n1, p, p1, p2,
1018                 calc_vclock3(index, m, n, p),
1019                 calc_vclock(index, m1, m2, n1, p1, p2, 0),
1020                 calc_vclock3(index, m, n, p) * p);
1021         *retm1 = m1;
1022         *retm2 = m2;
1023         *retn = n1;
1024         *retp1 = p1;
1025         *retp2 = p2;
1026         *retclock = calc_vclock(index, m1, m2, n1, p1, p2, 0);
1027
1028         return 0;
1029 }
1030
1031 static __inline__ int check_overflow(u32 value, u32 limit,
1032                                      const char *description)
1033 {
1034         if (value > limit) {
1035                 WRN_MSG("%s value %d exceeds limit %d\n",
1036                         description, value, limit);
1037                 return 1;
1038         }
1039         return 0;
1040 }
1041
1042 /* It is assumed that hw is filled in with the initial state information. */
1043 int intelfbhw_mode_to_hw(struct intelfb_info *dinfo,
1044                          struct intelfb_hwstate *hw,
1045                          struct fb_var_screeninfo *var)
1046 {
1047         int pipe = intelfbhw_active_pipe(hw);
1048         u32 *dpll, *fp0, *fp1;
1049         u32 m1, m2, n, p1, p2, clock_target, clock;
1050         u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
1051         u32 vsync_start, vsync_end, vblank_start, vblank_end, vtotal, vactive;
1052         u32 vsync_pol, hsync_pol;
1053         u32 *vs, *vb, *vt, *hs, *hb, *ht, *ss, *pipe_conf;
1054         u32 stride_alignment;
1055
1056         DBG_MSG("intelfbhw_mode_to_hw\n");
1057
1058         /* Disable VGA */
1059         hw->vgacntrl |= VGA_DISABLE;
1060
1061         /* Set which pipe's registers will be set. */
1062         if (pipe == PIPE_B) {
1063                 dpll = &hw->dpll_b;
1064                 fp0 = &hw->fpb0;
1065                 fp1 = &hw->fpb1;
1066                 hs = &hw->hsync_b;
1067                 hb = &hw->hblank_b;
1068                 ht = &hw->htotal_b;
1069                 vs = &hw->vsync_b;
1070                 vb = &hw->vblank_b;
1071                 vt = &hw->vtotal_b;
1072                 ss = &hw->src_size_b;
1073                 pipe_conf = &hw->pipe_b_conf;
1074         } else {
1075                 dpll = &hw->dpll_a;
1076                 fp0 = &hw->fpa0;
1077                 fp1 = &hw->fpa1;
1078                 hs = &hw->hsync_a;
1079                 hb = &hw->hblank_a;
1080                 ht = &hw->htotal_a;
1081                 vs = &hw->vsync_a;
1082                 vb = &hw->vblank_a;
1083                 vt = &hw->vtotal_a;
1084                 ss = &hw->src_size_a;
1085                 pipe_conf = &hw->pipe_a_conf;
1086         }
1087
1088         /* Use ADPA register for sync control. */
1089         hw->adpa &= ~ADPA_USE_VGA_HVPOLARITY;
1090
1091         /* sync polarity */
1092         hsync_pol = (var->sync & FB_SYNC_HOR_HIGH_ACT) ?
1093                         ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
1094         vsync_pol = (var->sync & FB_SYNC_VERT_HIGH_ACT) ?
1095                         ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
1096         hw->adpa &= ~((ADPA_SYNC_ACTIVE_MASK << ADPA_VSYNC_ACTIVE_SHIFT) |
1097                       (ADPA_SYNC_ACTIVE_MASK << ADPA_HSYNC_ACTIVE_SHIFT));
1098         hw->adpa |= (hsync_pol << ADPA_HSYNC_ACTIVE_SHIFT) |
1099                     (vsync_pol << ADPA_VSYNC_ACTIVE_SHIFT);
1100
1101         /* Connect correct pipe to the analog port DAC */
1102         hw->adpa &= ~(PIPE_MASK << ADPA_PIPE_SELECT_SHIFT);
1103         hw->adpa |= (pipe << ADPA_PIPE_SELECT_SHIFT);
1104
1105         /* Set DPMS state to D0 (on) */
1106         hw->adpa &= ~ADPA_DPMS_CONTROL_MASK;
1107         hw->adpa |= ADPA_DPMS_D0;
1108
1109         hw->adpa |= ADPA_DAC_ENABLE;
1110
1111         *dpll |= (DPLL_VCO_ENABLE | DPLL_VGA_MODE_DISABLE);
1112         *dpll &= ~(DPLL_RATE_SELECT_MASK | DPLL_REFERENCE_SELECT_MASK);
1113         *dpll |= (DPLL_REFERENCE_DEFAULT | DPLL_RATE_SELECT_FP0);
1114
1115         /* Desired clock in kHz */
1116         clock_target = 1000000000 / var->pixclock;
1117
1118         if (calc_pll_params(dinfo->pll_index, clock_target, &m1, &m2,
1119                             &n, &p1, &p2, &clock)) {
1120                 WRN_MSG("calc_pll_params failed\n");
1121                 return 1;
1122         }
1123
1124         /* Check for overflow. */
1125         if (check_overflow(p1, DPLL_P1_MASK, "PLL P1 parameter"))
1126                 return 1;
1127         if (check_overflow(p2, DPLL_P2_MASK, "PLL P2 parameter"))
1128                 return 1;
1129         if (check_overflow(m1, FP_DIVISOR_MASK, "PLL M1 parameter"))
1130                 return 1;
1131         if (check_overflow(m2, FP_DIVISOR_MASK, "PLL M2 parameter"))
1132                 return 1;
1133         if (check_overflow(n, FP_DIVISOR_MASK, "PLL N parameter"))
1134                 return 1;
1135
1136         *dpll &= ~DPLL_P1_FORCE_DIV2;
1137         *dpll &= ~((DPLL_P2_MASK << DPLL_P2_SHIFT) |
1138                    (DPLL_P1_MASK << DPLL_P1_SHIFT));
1139
1140         if (IS_I9XX(dinfo)) {
1141                 *dpll |= (p2 << DPLL_I9XX_P2_SHIFT);
1142                 *dpll |= (1 << (p1 - 1)) << DPLL_P1_SHIFT;
1143         } else
1144                 *dpll |= (p2 << DPLL_P2_SHIFT) | (p1 << DPLL_P1_SHIFT);
1145
1146         *fp0 = (n << FP_N_DIVISOR_SHIFT) |
1147                (m1 << FP_M1_DIVISOR_SHIFT) |
1148                (m2 << FP_M2_DIVISOR_SHIFT);
1149         *fp1 = *fp0;
1150
1151         hw->dvob &= ~PORT_ENABLE;
1152         hw->dvoc &= ~PORT_ENABLE;
1153
1154         /* Use display plane A. */
1155         hw->disp_a_ctrl |= DISPPLANE_PLANE_ENABLE;
1156         hw->disp_a_ctrl &= ~DISPPLANE_GAMMA_ENABLE;
1157         hw->disp_a_ctrl &= ~DISPPLANE_PIXFORMAT_MASK;
1158         switch (intelfb_var_to_depth(var)) {
1159         case 8:
1160                 hw->disp_a_ctrl |= DISPPLANE_8BPP | DISPPLANE_GAMMA_ENABLE;
1161                 break;
1162         case 15:
1163                 hw->disp_a_ctrl |= DISPPLANE_15_16BPP;
1164                 break;
1165         case 16:
1166                 hw->disp_a_ctrl |= DISPPLANE_16BPP;
1167                 break;
1168         case 24:
1169                 hw->disp_a_ctrl |= DISPPLANE_32BPP_NO_ALPHA;
1170                 break;
1171         }
1172         hw->disp_a_ctrl &= ~(PIPE_MASK << DISPPLANE_SEL_PIPE_SHIFT);
1173         hw->disp_a_ctrl |= (pipe << DISPPLANE_SEL_PIPE_SHIFT);
1174
1175         /* Set CRTC registers. */
1176         hactive = var->xres;
1177         hsync_start = hactive + var->right_margin;
1178         hsync_end = hsync_start + var->hsync_len;
1179         htotal = hsync_end + var->left_margin;
1180         hblank_start = hactive;
1181         hblank_end = htotal;
1182
1183         DBG_MSG("H: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
1184                 hactive, hsync_start, hsync_end, htotal, hblank_start,
1185                 hblank_end);
1186
1187         vactive = var->yres;
1188         if (var->vmode & FB_VMODE_INTERLACED)
1189                 vactive--; /* the chip adds 2 halflines automatically */
1190         vsync_start = vactive + var->lower_margin;
1191         vsync_end = vsync_start + var->vsync_len;
1192         vtotal = vsync_end + var->upper_margin;
1193         vblank_start = vactive;
1194         vblank_end = vsync_end + 1;
1195
1196         DBG_MSG("V: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
1197                 vactive, vsync_start, vsync_end, vtotal, vblank_start,
1198                 vblank_end);
1199
1200         /* Adjust for register values, and check for overflow. */
1201         hactive--;
1202         if (check_overflow(hactive, HACTIVE_MASK, "CRTC hactive"))
1203                 return 1;
1204         hsync_start--;
1205         if (check_overflow(hsync_start, HSYNCSTART_MASK, "CRTC hsync_start"))
1206                 return 1;
1207         hsync_end--;
1208         if (check_overflow(hsync_end, HSYNCEND_MASK, "CRTC hsync_end"))
1209                 return 1;
1210         htotal--;
1211         if (check_overflow(htotal, HTOTAL_MASK, "CRTC htotal"))
1212                 return 1;
1213         hblank_start--;
1214         if (check_overflow(hblank_start, HBLANKSTART_MASK, "CRTC hblank_start"))
1215                 return 1;
1216         hblank_end--;
1217         if (check_overflow(hblank_end, HBLANKEND_MASK, "CRTC hblank_end"))
1218                 return 1;
1219
1220         vactive--;
1221         if (check_overflow(vactive, VACTIVE_MASK, "CRTC vactive"))
1222                 return 1;
1223         vsync_start--;
1224         if (check_overflow(vsync_start, VSYNCSTART_MASK, "CRTC vsync_start"))
1225                 return 1;
1226         vsync_end--;
1227         if (check_overflow(vsync_end, VSYNCEND_MASK, "CRTC vsync_end"))
1228                 return 1;
1229         vtotal--;
1230         if (check_overflow(vtotal, VTOTAL_MASK, "CRTC vtotal"))
1231                 return 1;
1232         vblank_start--;
1233         if (check_overflow(vblank_start, VBLANKSTART_MASK, "CRTC vblank_start"))
1234                 return 1;
1235         vblank_end--;
1236         if (check_overflow(vblank_end, VBLANKEND_MASK, "CRTC vblank_end"))
1237                 return 1;
1238
1239         *ht = (htotal << HTOTAL_SHIFT) | (hactive << HACTIVE_SHIFT);
1240         *hb = (hblank_start << HBLANKSTART_SHIFT) |
1241               (hblank_end << HSYNCEND_SHIFT);
1242         *hs = (hsync_start << HSYNCSTART_SHIFT) | (hsync_end << HSYNCEND_SHIFT);
1243
1244         *vt = (vtotal << VTOTAL_SHIFT) | (vactive << VACTIVE_SHIFT);
1245         *vb = (vblank_start << VBLANKSTART_SHIFT) |
1246               (vblank_end << VSYNCEND_SHIFT);
1247         *vs = (vsync_start << VSYNCSTART_SHIFT) | (vsync_end << VSYNCEND_SHIFT);
1248         *ss = (hactive << SRC_SIZE_HORIZ_SHIFT) |
1249               (vactive << SRC_SIZE_VERT_SHIFT);
1250
1251         hw->disp_a_stride = dinfo->pitch;
1252         DBG_MSG("pitch is %d\n", hw->disp_a_stride);
1253
1254         hw->disp_a_base = hw->disp_a_stride * var->yoffset +
1255                           var->xoffset * var->bits_per_pixel / 8;
1256
1257         hw->disp_a_base += dinfo->fb.offset << 12;
1258
1259         /* Check stride alignment. */
1260         stride_alignment = IS_I9XX(dinfo) ? STRIDE_ALIGNMENT_I9XX :
1261                                             STRIDE_ALIGNMENT;
1262         if (hw->disp_a_stride % stride_alignment != 0) {
1263                 WRN_MSG("display stride %d has bad alignment %d\n",
1264                         hw->disp_a_stride, stride_alignment);
1265                 return 1;
1266         }
1267
1268         /* Set the palette to 8-bit mode. */
1269         *pipe_conf &= ~PIPECONF_GAMMA;
1270
1271         if (var->vmode & FB_VMODE_INTERLACED)
1272                 *pipe_conf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
1273         else
1274                 *pipe_conf &= ~PIPECONF_INTERLACE_MASK;
1275
1276         return 0;
1277 }
1278
1279 /* Program a (non-VGA) video mode. */
1280 int intelfbhw_program_mode(struct intelfb_info *dinfo,
1281                            const struct intelfb_hwstate *hw, int blank)
1282 {
1283         u32 tmp;
1284         const u32 *dpll, *fp0, *fp1, *pipe_conf;
1285         const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
1286         u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg, pipe_stat_reg;
1287         u32 hsync_reg, htotal_reg, hblank_reg;
1288         u32 vsync_reg, vtotal_reg, vblank_reg;
1289         u32 src_size_reg;
1290         u32 count, tmp_val[3];
1291
1292         /* Assume single pipe */
1293
1294 #if VERBOSE > 0
1295         DBG_MSG("intelfbhw_program_mode\n");
1296 #endif
1297
1298         /* Disable VGA */
1299         tmp = INREG(VGACNTRL);
1300         tmp |= VGA_DISABLE;
1301         OUTREG(VGACNTRL, tmp);
1302
1303         dinfo->pipe = intelfbhw_active_pipe(hw);
1304
1305         if (dinfo->pipe == PIPE_B) {
1306                 dpll = &hw->dpll_b;
1307                 fp0 = &hw->fpb0;
1308                 fp1 = &hw->fpb1;
1309                 pipe_conf = &hw->pipe_b_conf;
1310                 hs = &hw->hsync_b;
1311                 hb = &hw->hblank_b;
1312                 ht = &hw->htotal_b;
1313                 vs = &hw->vsync_b;
1314                 vb = &hw->vblank_b;
1315                 vt = &hw->vtotal_b;
1316                 ss = &hw->src_size_b;
1317                 dpll_reg = DPLL_B;
1318                 fp0_reg = FPB0;
1319                 fp1_reg = FPB1;
1320                 pipe_conf_reg = PIPEBCONF;
1321                 pipe_stat_reg = PIPEBSTAT;
1322                 hsync_reg = HSYNC_B;
1323                 htotal_reg = HTOTAL_B;
1324                 hblank_reg = HBLANK_B;
1325                 vsync_reg = VSYNC_B;
1326                 vtotal_reg = VTOTAL_B;
1327                 vblank_reg = VBLANK_B;
1328                 src_size_reg = SRC_SIZE_B;
1329         } else {
1330                 dpll = &hw->dpll_a;
1331                 fp0 = &hw->fpa0;
1332                 fp1 = &hw->fpa1;
1333                 pipe_conf = &hw->pipe_a_conf;
1334                 hs = &hw->hsync_a;
1335                 hb = &hw->hblank_a;
1336                 ht = &hw->htotal_a;
1337                 vs = &hw->vsync_a;
1338                 vb = &hw->vblank_a;
1339                 vt = &hw->vtotal_a;
1340                 ss = &hw->src_size_a;
1341                 dpll_reg = DPLL_A;
1342                 fp0_reg = FPA0;
1343                 fp1_reg = FPA1;
1344                 pipe_conf_reg = PIPEACONF;
1345                 pipe_stat_reg = PIPEASTAT;
1346                 hsync_reg = HSYNC_A;
1347                 htotal_reg = HTOTAL_A;
1348                 hblank_reg = HBLANK_A;
1349                 vsync_reg = VSYNC_A;
1350                 vtotal_reg = VTOTAL_A;
1351                 vblank_reg = VBLANK_A;
1352                 src_size_reg = SRC_SIZE_A;
1353         }
1354
1355         /* turn off pipe */
1356         tmp = INREG(pipe_conf_reg);
1357         tmp &= ~PIPECONF_ENABLE;
1358         OUTREG(pipe_conf_reg, tmp);
1359
1360         count = 0;
1361         do {
1362                 tmp_val[count % 3] = INREG(PIPEA_DSL);
1363                 if ((tmp_val[0] == tmp_val[1]) && (tmp_val[1] == tmp_val[2]))
1364                         break;
1365                 count++;
1366                 udelay(1);
1367                 if (count % 200 == 0) {
1368                         tmp = INREG(pipe_conf_reg);
1369                         tmp &= ~PIPECONF_ENABLE;
1370                         OUTREG(pipe_conf_reg, tmp);
1371                 }
1372         } while (count < 2000);
1373
1374         OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
1375
1376         /* Disable planes A and B. */
1377         tmp = INREG(DSPACNTR);
1378         tmp &= ~DISPPLANE_PLANE_ENABLE;
1379         OUTREG(DSPACNTR, tmp);
1380         tmp = INREG(DSPBCNTR);
1381         tmp &= ~DISPPLANE_PLANE_ENABLE;
1382         OUTREG(DSPBCNTR, tmp);
1383
1384         /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
1385         mdelay(20);
1386
1387         OUTREG(DVOB, INREG(DVOB) & ~PORT_ENABLE);
1388         OUTREG(DVOC, INREG(DVOC) & ~PORT_ENABLE);
1389         OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
1390
1391         /* Disable Sync */
1392         tmp = INREG(ADPA);
1393         tmp &= ~ADPA_DPMS_CONTROL_MASK;
1394         tmp |= ADPA_DPMS_D3;
1395         OUTREG(ADPA, tmp);
1396
1397         /* do some funky magic - xyzzy */
1398         OUTREG(0x61204, 0xabcd0000);
1399
1400         /* turn off PLL */
1401         tmp = INREG(dpll_reg);
1402         tmp &= ~DPLL_VCO_ENABLE;
1403         OUTREG(dpll_reg, tmp);
1404
1405         /* Set PLL parameters */
1406         OUTREG(fp0_reg, *fp0);
1407         OUTREG(fp1_reg, *fp1);
1408
1409         /* Enable PLL */
1410         OUTREG(dpll_reg, *dpll);
1411
1412         /* Set DVOs B/C */
1413         OUTREG(DVOB, hw->dvob);
1414         OUTREG(DVOC, hw->dvoc);
1415
1416         /* undo funky magic */
1417         OUTREG(0x61204, 0x00000000);
1418
1419         /* Set ADPA */
1420         OUTREG(ADPA, INREG(ADPA) | ADPA_DAC_ENABLE);
1421         OUTREG(ADPA, (hw->adpa & ~(ADPA_DPMS_CONTROL_MASK)) | ADPA_DPMS_D3);
1422
1423         /* Set pipe parameters */
1424         OUTREG(hsync_reg, *hs);
1425         OUTREG(hblank_reg, *hb);
1426         OUTREG(htotal_reg, *ht);
1427         OUTREG(vsync_reg, *vs);
1428         OUTREG(vblank_reg, *vb);
1429         OUTREG(vtotal_reg, *vt);
1430         OUTREG(src_size_reg, *ss);
1431
1432         switch (dinfo->info->var.vmode & (FB_VMODE_INTERLACED |
1433                                           FB_VMODE_ODD_FLD_FIRST)) {
1434         case FB_VMODE_INTERLACED | FB_VMODE_ODD_FLD_FIRST:
1435                 OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_ODD_EN);
1436                 break;
1437         case FB_VMODE_INTERLACED: /* even lines first */
1438                 OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_EVEN_EN);
1439                 break;
1440         default:                /* non-interlaced */
1441                 OUTREG(pipe_stat_reg, 0xFFFF); /* clear all status bits only */
1442         }
1443         /* Enable pipe */
1444         OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
1445
1446         /* Enable sync */
1447         tmp = INREG(ADPA);
1448         tmp &= ~ADPA_DPMS_CONTROL_MASK;
1449         tmp |= ADPA_DPMS_D0;
1450         OUTREG(ADPA, tmp);
1451
1452         /* setup display plane */
1453         if (dinfo->pdev->device == PCI_DEVICE_ID_INTEL_830M) {
1454                 /*
1455                  *      i830M errata: the display plane must be enabled
1456                  *      to allow writes to the other bits in the plane
1457                  *      control register.
1458                  */
1459                 tmp = INREG(DSPACNTR);
1460                 if ((tmp & DISPPLANE_PLANE_ENABLE) != DISPPLANE_PLANE_ENABLE) {
1461                         tmp |= DISPPLANE_PLANE_ENABLE;
1462                         OUTREG(DSPACNTR, tmp);
1463                         OUTREG(DSPACNTR,
1464                                hw->disp_a_ctrl|DISPPLANE_PLANE_ENABLE);
1465                         mdelay(1);
1466                 }
1467         }
1468
1469         OUTREG(DSPACNTR, hw->disp_a_ctrl & ~DISPPLANE_PLANE_ENABLE);
1470         OUTREG(DSPASTRIDE, hw->disp_a_stride);
1471         OUTREG(DSPABASE, hw->disp_a_base);
1472
1473         /* Enable plane */
1474         if (!blank) {
1475                 tmp = INREG(DSPACNTR);
1476                 tmp |= DISPPLANE_PLANE_ENABLE;
1477                 OUTREG(DSPACNTR, tmp);
1478                 OUTREG(DSPABASE, hw->disp_a_base);
1479         }
1480
1481         return 0;
1482 }
1483
1484 /* forward declarations */
1485 static void refresh_ring(struct intelfb_info *dinfo);
1486 static void reset_state(struct intelfb_info *dinfo);
1487 static void do_flush(struct intelfb_info *dinfo);
1488
1489 static  u32 get_ring_space(struct intelfb_info *dinfo)
1490 {
1491         u32 ring_space;
1492
1493         if (dinfo->ring_tail >= dinfo->ring_head)
1494                 ring_space = dinfo->ring.size -
1495                         (dinfo->ring_tail - dinfo->ring_head);
1496         else
1497                 ring_space = dinfo->ring_head - dinfo->ring_tail;
1498
1499         if (ring_space > RING_MIN_FREE)
1500                 ring_space -= RING_MIN_FREE;
1501         else
1502                 ring_space = 0;
1503
1504         return ring_space;
1505 }
1506
1507 static int wait_ring(struct intelfb_info *dinfo, int n)
1508 {
1509         int i = 0;
1510         unsigned long end;
1511         u32 last_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
1512
1513 #if VERBOSE > 0
1514         DBG_MSG("wait_ring: %d\n", n);
1515 #endif
1516
1517         end = jiffies + (HZ * 3);
1518         while (dinfo->ring_space < n) {
1519                 dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
1520                 dinfo->ring_space = get_ring_space(dinfo);
1521
1522                 if (dinfo->ring_head != last_head) {
1523                         end = jiffies + (HZ * 3);
1524                         last_head = dinfo->ring_head;
1525                 }
1526                 i++;
1527                 if (time_before(end, jiffies)) {
1528                         if (!i) {
1529                                 /* Try again */
1530                                 reset_state(dinfo);
1531                                 refresh_ring(dinfo);
1532                                 do_flush(dinfo);
1533                                 end = jiffies + (HZ * 3);
1534                                 i = 1;
1535                         } else {
1536                                 WRN_MSG("ring buffer : space: %d wanted %d\n",
1537                                         dinfo->ring_space, n);
1538                                 WRN_MSG("lockup - turning off hardware "
1539                                         "acceleration\n");
1540                                 dinfo->ring_lockup = 1;
1541                                 break;
1542                         }
1543                 }
1544                 udelay(1);
1545         }
1546         return i;
1547 }
1548
1549 static void do_flush(struct intelfb_info *dinfo)
1550 {
1551         START_RING(2);
1552         OUT_RING(MI_FLUSH | MI_WRITE_DIRTY_STATE | MI_INVALIDATE_MAP_CACHE);
1553         OUT_RING(MI_NOOP);
1554         ADVANCE_RING();
1555 }
1556
1557 void intelfbhw_do_sync(struct intelfb_info *dinfo)
1558 {
1559 #if VERBOSE > 0
1560         DBG_MSG("intelfbhw_do_sync\n");
1561 #endif
1562
1563         if (!dinfo->accel)
1564                 return;
1565
1566         /*
1567          * Send a flush, then wait until the ring is empty.  This is what
1568          * the XFree86 driver does, and actually it doesn't seem a lot worse
1569          * than the recommended method (both have problems).
1570          */
1571         do_flush(dinfo);
1572         wait_ring(dinfo, dinfo->ring.size - RING_MIN_FREE);
1573         dinfo->ring_space = dinfo->ring.size - RING_MIN_FREE;
1574 }
1575
1576 static void refresh_ring(struct intelfb_info *dinfo)
1577 {
1578 #if VERBOSE > 0
1579         DBG_MSG("refresh_ring\n");
1580 #endif
1581
1582         dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
1583         dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;
1584         dinfo->ring_space = get_ring_space(dinfo);
1585 }
1586
1587 static void reset_state(struct intelfb_info *dinfo)
1588 {
1589         int i;
1590         u32 tmp;
1591
1592 #if VERBOSE > 0
1593         DBG_MSG("reset_state\n");
1594 #endif
1595
1596         for (i = 0; i < FENCE_NUM; i++)
1597                 OUTREG(FENCE + (i << 2), 0);
1598
1599         /* Flush the ring buffer if it's enabled. */
1600         tmp = INREG(PRI_RING_LENGTH);
1601         if (tmp & RING_ENABLE) {
1602 #if VERBOSE > 0
1603                 DBG_MSG("reset_state: ring was enabled\n");
1604 #endif
1605                 refresh_ring(dinfo);
1606                 intelfbhw_do_sync(dinfo);
1607                 DO_RING_IDLE();
1608         }
1609
1610         OUTREG(PRI_RING_LENGTH, 0);
1611         OUTREG(PRI_RING_HEAD, 0);
1612         OUTREG(PRI_RING_TAIL, 0);
1613         OUTREG(PRI_RING_START, 0);
1614 }
1615
1616 /* Stop the 2D engine, and turn off the ring buffer. */
1617 void intelfbhw_2d_stop(struct intelfb_info *dinfo)
1618 {
1619 #if VERBOSE > 0
1620         DBG_MSG("intelfbhw_2d_stop: accel: %d, ring_active: %d\n",
1621                 dinfo->accel, dinfo->ring_active);
1622 #endif
1623
1624         if (!dinfo->accel)
1625                 return;
1626
1627         dinfo->ring_active = 0;
1628         reset_state(dinfo);
1629 }
1630
1631 /*
1632  * Enable the ring buffer, and initialise the 2D engine.
1633  * It is assumed that the graphics engine has been stopped by previously
1634  * calling intelfb_2d_stop().
1635  */
1636 void intelfbhw_2d_start(struct intelfb_info *dinfo)
1637 {
1638 #if VERBOSE > 0
1639         DBG_MSG("intelfbhw_2d_start: accel: %d, ring_active: %d\n",
1640                 dinfo->accel, dinfo->ring_active);
1641 #endif
1642
1643         if (!dinfo->accel)
1644                 return;
1645
1646         /* Initialise the primary ring buffer. */
1647         OUTREG(PRI_RING_LENGTH, 0);
1648         OUTREG(PRI_RING_TAIL, 0);
1649         OUTREG(PRI_RING_HEAD, 0);
1650
1651         OUTREG(PRI_RING_START, dinfo->ring.physical & RING_START_MASK);
1652         OUTREG(PRI_RING_LENGTH,
1653                 ((dinfo->ring.size - GTT_PAGE_SIZE) & RING_LENGTH_MASK) |
1654                 RING_NO_REPORT | RING_ENABLE);
1655         refresh_ring(dinfo);
1656         dinfo->ring_active = 1;
1657 }
1658
1659 /* 2D fillrect (solid fill or invert) */
1660 void intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y, u32 w,
1661                            u32 h, u32 color, u32 pitch, u32 bpp, u32 rop)
1662 {
1663         u32 br00, br09, br13, br14, br16;
1664
1665 #if VERBOSE > 0
1666         DBG_MSG("intelfbhw_do_fillrect: (%d,%d) %dx%d, c 0x%06x, p %d bpp %d, "
1667                 "rop 0x%02x\n", x, y, w, h, color, pitch, bpp, rop);
1668 #endif
1669
1670         br00 = COLOR_BLT_CMD;
1671         br09 = dinfo->fb_start + (y * pitch + x * (bpp / 8));
1672         br13 = (rop << ROP_SHIFT) | pitch;
1673         br14 = (h << HEIGHT_SHIFT) | ((w * (bpp / 8)) << WIDTH_SHIFT);
1674         br16 = color;
1675
1676         switch (bpp) {
1677         case 8:
1678                 br13 |= COLOR_DEPTH_8;
1679                 break;
1680         case 16:
1681                 br13 |= COLOR_DEPTH_16;
1682                 break;
1683         case 32:
1684                 br13 |= COLOR_DEPTH_32;
1685                 br00 |= WRITE_ALPHA | WRITE_RGB;
1686                 break;
1687         }
1688
1689         START_RING(6);
1690         OUT_RING(br00);
1691         OUT_RING(br13);
1692         OUT_RING(br14);
1693         OUT_RING(br09);
1694         OUT_RING(br16);
1695         OUT_RING(MI_NOOP);
1696         ADVANCE_RING();
1697
1698 #if VERBOSE > 0
1699         DBG_MSG("ring = 0x%08x, 0x%08x (%d)\n", dinfo->ring_head,
1700                 dinfo->ring_tail, dinfo->ring_space);
1701 #endif
1702 }
1703
1704 void
1705 intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
1706                     u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch, u32 bpp)
1707 {
1708         u32 br00, br09, br11, br12, br13, br22, br23, br26;
1709
1710 #if VERBOSE > 0
1711         DBG_MSG("intelfbhw_do_bitblt: (%d,%d)->(%d,%d) %dx%d, p %d bpp %d\n",
1712                 curx, cury, dstx, dsty, w, h, pitch, bpp);
1713 #endif
1714
1715         br00 = XY_SRC_COPY_BLT_CMD;
1716         br09 = dinfo->fb_start;
1717         br11 = (pitch << PITCH_SHIFT);
1718         br12 = dinfo->fb_start;
1719         br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
1720         br22 = (dstx << WIDTH_SHIFT) | (dsty << HEIGHT_SHIFT);
1721         br23 = ((dstx + w) << WIDTH_SHIFT) |
1722                ((dsty + h) << HEIGHT_SHIFT);
1723         br26 = (curx << WIDTH_SHIFT) | (cury << HEIGHT_SHIFT);
1724
1725         switch (bpp) {
1726         case 8:
1727                 br13 |= COLOR_DEPTH_8;
1728                 break;
1729         case 16:
1730                 br13 |= COLOR_DEPTH_16;
1731                 break;
1732         case 32:
1733                 br13 |= COLOR_DEPTH_32;
1734                 br00 |= WRITE_ALPHA | WRITE_RGB;
1735                 break;
1736         }
1737
1738         START_RING(8);
1739         OUT_RING(br00);
1740         OUT_RING(br13);
1741         OUT_RING(br22);
1742         OUT_RING(br23);
1743         OUT_RING(br09);
1744         OUT_RING(br26);
1745         OUT_RING(br11);
1746         OUT_RING(br12);
1747         ADVANCE_RING();
1748 }
1749
1750 int intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg, u32 w,
1751                            u32 h, const u8* cdat, u32 x, u32 y, u32 pitch,
1752                            u32 bpp)
1753 {
1754         int nbytes, ndwords, pad, tmp;
1755         u32 br00, br09, br13, br18, br19, br22, br23;
1756         int dat, ix, iy, iw;
1757         int i, j;
1758
1759 #if VERBOSE > 0
1760         DBG_MSG("intelfbhw_do_drawglyph: (%d,%d) %dx%d\n", x, y, w, h);
1761 #endif
1762
1763         /* size in bytes of a padded scanline */
1764         nbytes = ROUND_UP_TO(w, 16) / 8;
1765
1766         /* Total bytes of padded scanline data to write out. */
1767         nbytes = nbytes * h;
1768
1769         /*
1770          * Check if the glyph data exceeds the immediate mode limit.
1771          * It would take a large font (1K pixels) to hit this limit.
1772          */
1773         if (nbytes > MAX_MONO_IMM_SIZE)
1774                 return 0;
1775
1776         /* Src data is packaged a dword (32-bit) at a time. */
1777         ndwords = ROUND_UP_TO(nbytes, 4) / 4;
1778
1779         /*
1780          * Ring has to be padded to a quad word. But because the command starts
1781            with 7 bytes, pad only if there is an even number of ndwords
1782          */
1783         pad = !(ndwords % 2);
1784
1785         tmp = (XY_MONO_SRC_IMM_BLT_CMD & DW_LENGTH_MASK) + ndwords;
1786         br00 = (XY_MONO_SRC_IMM_BLT_CMD & ~DW_LENGTH_MASK) | tmp;
1787         br09 = dinfo->fb_start;
1788         br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
1789         br18 = bg;
1790         br19 = fg;
1791         br22 = (x << WIDTH_SHIFT) | (y << HEIGHT_SHIFT);
1792         br23 = ((x + w) << WIDTH_SHIFT) | ((y + h) << HEIGHT_SHIFT);
1793
1794         switch (bpp) {
1795         case 8:
1796                 br13 |= COLOR_DEPTH_8;
1797                 break;
1798         case 16:
1799                 br13 |= COLOR_DEPTH_16;
1800                 break;
1801         case 32:
1802                 br13 |= COLOR_DEPTH_32;
1803                 br00 |= WRITE_ALPHA | WRITE_RGB;
1804                 break;
1805         }
1806
1807         START_RING(8 + ndwords);
1808         OUT_RING(br00);
1809         OUT_RING(br13);
1810         OUT_RING(br22);
1811         OUT_RING(br23);
1812         OUT_RING(br09);
1813         OUT_RING(br18);
1814         OUT_RING(br19);
1815         ix = iy = 0;
1816         iw = ROUND_UP_TO(w, 8) / 8;
1817         while (ndwords--) {
1818                 dat = 0;
1819                 for (j = 0; j < 2; ++j) {
1820                         for (i = 0; i < 2; ++i) {
1821                                 if (ix != iw || i == 0)
1822                                         dat |= cdat[iy*iw + ix++] << (i+j*2)*8;
1823                         }
1824                         if (ix == iw && iy != (h-1)) {
1825                                 ix = 0;
1826                                 ++iy;
1827                         }
1828                 }
1829                 OUT_RING(dat);
1830         }
1831         if (pad)
1832                 OUT_RING(MI_NOOP);
1833         ADVANCE_RING();
1834
1835         return 1;
1836 }
1837
1838 /* HW cursor functions. */
1839 void intelfbhw_cursor_init(struct intelfb_info *dinfo)
1840 {
1841         u32 tmp;
1842
1843 #if VERBOSE > 0
1844         DBG_MSG("intelfbhw_cursor_init\n");
1845 #endif
1846
1847         if (dinfo->mobile || IS_I9XX(dinfo)) {
1848                 if (!dinfo->cursor.physical)
1849                         return;
1850                 tmp = INREG(CURSOR_A_CONTROL);
1851                 tmp &= ~(CURSOR_MODE_MASK | CURSOR_MOBILE_GAMMA_ENABLE |
1852                          CURSOR_MEM_TYPE_LOCAL |
1853                          (1 << CURSOR_PIPE_SELECT_SHIFT));
1854                 tmp |= CURSOR_MODE_DISABLE;
1855                 OUTREG(CURSOR_A_CONTROL, tmp);
1856                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1857         } else {
1858                 tmp = INREG(CURSOR_CONTROL);
1859                 tmp &= ~(CURSOR_FORMAT_MASK | CURSOR_GAMMA_ENABLE |
1860                          CURSOR_ENABLE | CURSOR_STRIDE_MASK);
1861                 tmp |= CURSOR_FORMAT_3C;
1862                 OUTREG(CURSOR_CONTROL, tmp);
1863                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.offset << 12);
1864                 tmp = (64 << CURSOR_SIZE_H_SHIFT) |
1865                       (64 << CURSOR_SIZE_V_SHIFT);
1866                 OUTREG(CURSOR_SIZE, tmp);
1867         }
1868 }
1869
1870 void intelfbhw_cursor_hide(struct intelfb_info *dinfo)
1871 {
1872         u32 tmp;
1873
1874 #if VERBOSE > 0
1875         DBG_MSG("intelfbhw_cursor_hide\n");
1876 #endif
1877
1878         dinfo->cursor_on = 0;
1879         if (dinfo->mobile || IS_I9XX(dinfo)) {
1880                 if (!dinfo->cursor.physical)
1881                         return;
1882                 tmp = INREG(CURSOR_A_CONTROL);
1883                 tmp &= ~CURSOR_MODE_MASK;
1884                 tmp |= CURSOR_MODE_DISABLE;
1885                 OUTREG(CURSOR_A_CONTROL, tmp);
1886                 /* Flush changes */
1887                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1888         } else {
1889                 tmp = INREG(CURSOR_CONTROL);
1890                 tmp &= ~CURSOR_ENABLE;
1891                 OUTREG(CURSOR_CONTROL, tmp);
1892         }
1893 }
1894
1895 void intelfbhw_cursor_show(struct intelfb_info *dinfo)
1896 {
1897         u32 tmp;
1898
1899 #if VERBOSE > 0
1900         DBG_MSG("intelfbhw_cursor_show\n");
1901 #endif
1902
1903         dinfo->cursor_on = 1;
1904
1905         if (dinfo->cursor_blanked)
1906                 return;
1907
1908         if (dinfo->mobile || IS_I9XX(dinfo)) {
1909                 if (!dinfo->cursor.physical)
1910                         return;
1911                 tmp = INREG(CURSOR_A_CONTROL);
1912                 tmp &= ~CURSOR_MODE_MASK;
1913                 tmp |= CURSOR_MODE_64_4C_AX;
1914                 OUTREG(CURSOR_A_CONTROL, tmp);
1915                 /* Flush changes */
1916                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1917         } else {
1918                 tmp = INREG(CURSOR_CONTROL);
1919                 tmp |= CURSOR_ENABLE;
1920                 OUTREG(CURSOR_CONTROL, tmp);
1921         }
1922 }
1923
1924 void intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y)
1925 {
1926         u32 tmp;
1927
1928 #if VERBOSE > 0
1929         DBG_MSG("intelfbhw_cursor_setpos: (%d, %d)\n", x, y);
1930 #endif
1931
1932         /*
1933          * Sets the position. The coordinates are assumed to already
1934          * have any offset adjusted. Assume that the cursor is never
1935          * completely off-screen, and that x, y are always >= 0.
1936          */
1937
1938         tmp = ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
1939               ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
1940         OUTREG(CURSOR_A_POSITION, tmp);
1941
1942         if (IS_I9XX(dinfo))
1943                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1944 }
1945
1946 void intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg, u32 fg)
1947 {
1948 #if VERBOSE > 0
1949         DBG_MSG("intelfbhw_cursor_setcolor\n");
1950 #endif
1951
1952         OUTREG(CURSOR_A_PALETTE0, bg & CURSOR_PALETTE_MASK);
1953         OUTREG(CURSOR_A_PALETTE1, fg & CURSOR_PALETTE_MASK);
1954         OUTREG(CURSOR_A_PALETTE2, fg & CURSOR_PALETTE_MASK);
1955         OUTREG(CURSOR_A_PALETTE3, bg & CURSOR_PALETTE_MASK);
1956 }
1957
1958 void intelfbhw_cursor_load(struct intelfb_info *dinfo, int width, int height,
1959                            u8 *data)
1960 {
1961         u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
1962         int i, j, w = width / 8;
1963         int mod = width % 8, t_mask, d_mask;
1964
1965 #if VERBOSE > 0
1966         DBG_MSG("intelfbhw_cursor_load\n");
1967 #endif
1968
1969         if (!dinfo->cursor.virtual)
1970                 return;
1971
1972         t_mask = 0xff >> mod;
1973         d_mask = ~(0xff >> mod);
1974         for (i = height; i--; ) {
1975                 for (j = 0; j < w; j++) {
1976                         writeb(0x00, addr + j);
1977                         writeb(*(data++), addr + j+8);
1978                 }
1979                 if (mod) {
1980                         writeb(t_mask, addr + j);
1981                         writeb(*(data++) & d_mask, addr + j+8);
1982                 }
1983                 addr += 16;
1984         }
1985 }
1986
1987 void intelfbhw_cursor_reset(struct intelfb_info *dinfo)
1988 {
1989         u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
1990         int i, j;
1991
1992 #if VERBOSE > 0
1993         DBG_MSG("intelfbhw_cursor_reset\n");
1994 #endif
1995
1996         if (!dinfo->cursor.virtual)
1997                 return;
1998
1999         for (i = 64; i--; ) {
2000                 for (j = 0; j < 8; j++) {
2001                         writeb(0xff, addr + j+0);
2002                         writeb(0x00, addr + j+8);
2003                 }
2004                 addr += 16;
2005         }
2006 }
2007
2008 static irqreturn_t intelfbhw_irq(int irq, void *dev_id)
2009 {
2010         u16 tmp;
2011         struct intelfb_info *dinfo = dev_id;
2012
2013         spin_lock(&dinfo->int_lock);
2014
2015         tmp = INREG16(IIR);
2016         if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
2017                 tmp &= PIPE_A_EVENT_INTERRUPT;
2018         else
2019                 tmp &= VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
2020
2021         if (tmp == 0) {
2022                 spin_unlock(&dinfo->int_lock);
2023                 return IRQ_RETVAL(0); /* not us */
2024         }
2025
2026         /* clear status bits 0-15 ASAP and don't touch bits 16-31 */
2027         OUTREG(PIPEASTAT, INREG(PIPEASTAT));
2028
2029         OUTREG16(IIR, tmp);
2030         if (dinfo->vsync.pan_display) {
2031                 dinfo->vsync.pan_display = 0;
2032                 OUTREG(DSPABASE, dinfo->vsync.pan_offset);
2033         }
2034
2035         dinfo->vsync.count++;
2036         wake_up_interruptible(&dinfo->vsync.wait);
2037
2038         spin_unlock(&dinfo->int_lock);
2039
2040         return IRQ_RETVAL(1);
2041 }
2042
2043 int intelfbhw_enable_irq(struct intelfb_info *dinfo)
2044 {
2045         u16 tmp;
2046         if (!test_and_set_bit(0, &dinfo->irq_flags)) {
2047                 if (request_irq(dinfo->pdev->irq, intelfbhw_irq, IRQF_SHARED,
2048                                 "intelfb", dinfo)) {
2049                         clear_bit(0, &dinfo->irq_flags);
2050                         return -EINVAL;
2051                 }
2052
2053                 spin_lock_irq(&dinfo->int_lock);
2054                 OUTREG16(HWSTAM, 0xfffe); /* i830 DRM uses ffff */
2055                 OUTREG16(IMR, 0);
2056         } else
2057                 spin_lock_irq(&dinfo->int_lock);
2058
2059         if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
2060                 tmp = PIPE_A_EVENT_INTERRUPT;
2061         else
2062                 tmp = VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
2063         if (tmp != INREG16(IER)) {
2064                 DBG_MSG("changing IER to 0x%X\n", tmp);
2065                 OUTREG16(IER, tmp);
2066         }
2067
2068         spin_unlock_irq(&dinfo->int_lock);
2069         return 0;
2070 }
2071
2072 void intelfbhw_disable_irq(struct intelfb_info *dinfo)
2073 {
2074         if (test_and_clear_bit(0, &dinfo->irq_flags)) {
2075                 if (dinfo->vsync.pan_display) {
2076                         dinfo->vsync.pan_display = 0;
2077                         OUTREG(DSPABASE, dinfo->vsync.pan_offset);
2078                 }
2079                 spin_lock_irq(&dinfo->int_lock);
2080                 OUTREG16(HWSTAM, 0xffff);
2081                 OUTREG16(IMR, 0xffff);
2082                 OUTREG16(IER, 0x0);
2083
2084                 OUTREG16(IIR, INREG16(IIR)); /* clear IRQ requests */
2085                 spin_unlock_irq(&dinfo->int_lock);
2086
2087                 free_irq(dinfo->pdev->irq, dinfo);
2088         }
2089 }
2090
2091 int intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe)
2092 {
2093         struct intelfb_vsync *vsync;
2094         unsigned int count;
2095         int ret;
2096
2097         switch (pipe) {
2098                 case 0:
2099                         vsync = &dinfo->vsync;
2100                         break;
2101                 default:
2102                         return -ENODEV;
2103         }
2104
2105         ret = intelfbhw_enable_irq(dinfo);
2106         if (ret)
2107                 return ret;
2108
2109         count = vsync->count;
2110         ret = wait_event_interruptible_timeout(vsync->wait,
2111                                                count != vsync->count, HZ / 10);
2112         if (ret < 0)
2113                 return ret;
2114         if (ret == 0) {
2115                 DBG_MSG("wait_for_vsync timed out!\n");
2116                 return -ETIMEDOUT;
2117         }
2118
2119         return 0;
2120 }