Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / video / fbdev / dnfb.c
1 #include <linux/kernel.h>
2 #include <linux/errno.h>
3 #include <linux/string.h>
4 #include <linux/mm.h>
5 #include <linux/delay.h>
6 #include <linux/interrupt.h>
7 #include <linux/platform_device.h>
8
9 #include <asm/setup.h>
10 #include <asm/irq.h>
11 #include <asm/amigahw.h>
12 #include <asm/amigaints.h>
13 #include <asm/apollohw.h>
14 #include <linux/fb.h>
15 #include <linux/module.h>
16
17 /* apollo video HW definitions */
18
19 /*
20  * Control Registers.   IOBASE + $x
21  *
22  * Note: these are the Memory/IO BASE definitions for a mono card set to the
23  * alternate address
24  *
25  * Control 3A and 3B serve identical functions except that 3A
26  * deals with control 1 and 3b deals with Color LUT reg.
27  */
28
29 #define AP_IOBASE       0x3b0   /* Base address of 1 plane board. */
30 #define AP_STATUS       isaIO2mem(AP_IOBASE+0)  /* Status register.  Read */
31 #define AP_WRITE_ENABLE isaIO2mem(AP_IOBASE+0)  /* Write Enable Register Write */
32 #define AP_DEVICE_ID    isaIO2mem(AP_IOBASE+1)  /* Device ID Register. Read */
33 #define AP_ROP_1        isaIO2mem(AP_IOBASE+2)  /* Raster Operation reg. Write Word */
34 #define AP_DIAG_MEM_REQ isaIO2mem(AP_IOBASE+4)  /* Diagnostic Memory Request. Write Word */
35 #define AP_CONTROL_0    isaIO2mem(AP_IOBASE+8)  /* Control Register 0.  Read/Write */
36 #define AP_CONTROL_1    isaIO2mem(AP_IOBASE+0xa)        /* Control Register 1.  Read/Write */
37 #define AP_CONTROL_3A   isaIO2mem(AP_IOBASE+0xe)        /* Control Register 3a. Read/Write */
38 #define AP_CONTROL_2    isaIO2mem(AP_IOBASE+0xc)        /* Control Register 2. Read/Write */
39
40
41 #define FRAME_BUFFER_START 0x0FA0000
42 #define FRAME_BUFFER_LEN 0x40000
43
44 /* CREG 0 */
45 #define VECTOR_MODE 0x40        /* 010x.xxxx */
46 #define DBLT_MODE   0x80        /* 100x.xxxx */
47 #define NORMAL_MODE 0xE0        /* 111x.xxxx */
48 #define SHIFT_BITS  0x1F        /* xxx1.1111 */
49         /* other bits are Shift value */
50
51 /* CREG 1 */
52 #define AD_BLT      0x80        /* 1xxx.xxxx */
53 #define NORMAL      0x80 /* 1xxx.xxxx */        /* What is happening here ?? */
54 #define INVERSE     0x00 /* 0xxx.xxxx */        /* Clearing this reverses the screen */
55 #define PIX_BLT     0x00        /* 0xxx.xxxx */
56
57 #define AD_HIBIT        0x40    /* xIxx.xxxx */
58
59 #define ROP_EN          0x10    /* xxx1.xxxx */
60 #define DST_EQ_SRC      0x00    /* xxx0.xxxx */
61 #define nRESET_SYNC     0x08    /* xxxx.1xxx */
62 #define SYNC_ENAB       0x02    /* xxxx.xx1x */
63
64 #define BLANK_DISP      0x00    /* xxxx.xxx0 */
65 #define ENAB_DISP       0x01    /* xxxx.xxx1 */
66
67 #define NORM_CREG1      (nRESET_SYNC | SYNC_ENAB | ENAB_DISP)   /* no reset sync */
68
69 /* CREG 2 */
70
71 /*
72  * Following 3 defines are common to 1, 4 and 8 plane.
73  */
74
75 #define S_DATA_1s   0x00 /* 00xx.xxxx */        /* set source to all 1's -- vector drawing */
76 #define S_DATA_PIX  0x40 /* 01xx.xxxx */        /* takes source from ls-bits and replicates over 16 bits */
77 #define S_DATA_PLN  0xC0 /* 11xx.xxxx */        /* normal, each data access =16-bits in
78                                                    one plane of image mem */
79
80 /* CREG 3A/CREG 3B */
81 #       define RESET_CREG 0x80  /* 1000.0000 */
82
83 /* ROP REG  -  all one nibble */
84 /*      ********* NOTE : this is used r0,r1,r2,r3 *********** */
85 #define ROP(r2,r3,r0,r1) ( (U_SHORT)((r0)|((r1)<<4)|((r2)<<8)|((r3)<<12)) )
86 #define DEST_ZERO               0x0
87 #define SRC_AND_DEST    0x1
88 #define SRC_AND_nDEST   0x2
89 #define SRC                             0x3
90 #define nSRC_AND_DEST   0x4
91 #define DEST                    0x5
92 #define SRC_XOR_DEST    0x6
93 #define SRC_OR_DEST             0x7
94 #define SRC_NOR_DEST    0x8
95 #define SRC_XNOR_DEST   0x9
96 #define nDEST                   0xA
97 #define SRC_OR_nDEST    0xB
98 #define nSRC                    0xC
99 #define nSRC_OR_DEST    0xD
100 #define SRC_NAND_DEST   0xE
101 #define DEST_ONE                0xF
102
103 #define SWAP(A) ((A>>8) | ((A&0xff) <<8))
104
105 /* frame buffer operations */
106
107 static int dnfb_blank(int blank, struct fb_info *info);
108 static void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
109
110 static struct fb_ops dn_fb_ops = {
111         .owner          = THIS_MODULE,
112         .fb_blank       = dnfb_blank,
113         .fb_fillrect    = cfb_fillrect,
114         .fb_copyarea    = dnfb_copyarea,
115         .fb_imageblit   = cfb_imageblit,
116 };
117
118 struct fb_var_screeninfo dnfb_var = {
119         .xres           = 1280,
120         .yres           = 1024,
121         .xres_virtual   = 2048,
122         .yres_virtual   = 1024,
123         .bits_per_pixel = 1,
124         .height         = -1,
125         .width          = -1,
126         .vmode          = FB_VMODE_NONINTERLACED,
127 };
128
129 static struct fb_fix_screeninfo dnfb_fix = {
130         .id             = "Apollo Mono",
131         .smem_start     = (FRAME_BUFFER_START + IO_BASE),
132         .smem_len       = FRAME_BUFFER_LEN,
133         .type           = FB_TYPE_PACKED_PIXELS,
134         .visual         = FB_VISUAL_MONO10,
135         .line_length    = 256,
136 };
137
138 static int dnfb_blank(int blank, struct fb_info *info)
139 {
140         if (blank)
141                 out_8(AP_CONTROL_3A, 0x0);
142         else
143                 out_8(AP_CONTROL_3A, 0x1);
144         return 0;
145 }
146
147 static
148 void dnfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
149 {
150
151         int incr, y_delta, pre_read = 0, x_end, x_word_count;
152         uint start_mask, end_mask, dest;
153         ushort *src, dummy;
154         short i, j;
155
156         incr = (area->dy <= area->sy) ? 1 : -1;
157
158         src = (ushort *)(info->screen_base + area->sy * info->fix.line_length +
159                         (area->sx >> 4));
160         dest = area->dy * (info->fix.line_length >> 1) + (area->dx >> 4);
161
162         if (incr > 0) {
163                 y_delta = (info->fix.line_length * 8) - area->sx - area->width;
164                 x_end = area->dx + area->width - 1;
165                 x_word_count = (x_end >> 4) - (area->dx >> 4) + 1;
166                 start_mask = 0xffff0000 >> (area->dx & 0xf);
167                 end_mask = 0x7ffff >> (x_end & 0xf);
168                 out_8(AP_CONTROL_0,
169                      (((area->dx & 0xf) - (area->sx & 0xf)) % 16) | (0x4 << 5));
170                 if ((area->dx & 0xf) < (area->sx & 0xf))
171                         pre_read = 1;
172         } else {
173                 y_delta = -((info->fix.line_length * 8) - area->sx - area->width);
174                 x_end = area->dx - area->width + 1;
175                 x_word_count = (area->dx >> 4) - (x_end >> 4) + 1;
176                 start_mask = 0x7ffff >> (area->dx & 0xf);
177                 end_mask = 0xffff0000 >> (x_end & 0xf);
178                 out_8(AP_CONTROL_0,
179                      ((-((area->sx & 0xf) - (area->dx & 0xf))) % 16) |
180                      (0x4 << 5));
181                 if ((area->dx & 0xf) > (area->sx & 0xf))
182                         pre_read = 1;
183         }
184
185         for (i = 0; i < area->height; i++) {
186
187                 out_8(AP_CONTROL_3A, 0xc | (dest >> 16));
188
189                 if (pre_read) {
190                         dummy = *src;
191                         src += incr;
192                 }
193
194                 if (x_word_count) {
195                         out_8(AP_WRITE_ENABLE, start_mask);
196                         *src = dest;
197                         src += incr;
198                         dest += incr;
199                         out_8(AP_WRITE_ENABLE, 0);
200
201                         for (j = 1; j < (x_word_count - 1); j++) {
202                                 *src = dest;
203                                 src += incr;
204                                 dest += incr;
205                         }
206
207                         out_8(AP_WRITE_ENABLE, start_mask);
208                         *src = dest;
209                         dest += incr;
210                         src += incr;
211                 } else {
212                         out_8(AP_WRITE_ENABLE, start_mask | end_mask);
213                         *src = dest;
214                         dest += incr;
215                         src += incr;
216                 }
217                 src += (y_delta / 16);
218                 dest += (y_delta / 16);
219         }
220         out_8(AP_CONTROL_0, NORMAL_MODE);
221 }
222
223 /*
224  * Initialization
225  */
226
227 static int dnfb_probe(struct platform_device *dev)
228 {
229         struct fb_info *info;
230         int err = 0;
231
232         info = framebuffer_alloc(0, &dev->dev);
233         if (!info)
234                 return -ENOMEM;
235
236         info->fbops = &dn_fb_ops;
237         info->fix = dnfb_fix;
238         info->var = dnfb_var;
239         info->var.red.length = 1;
240         info->var.red.offset = 0;
241         info->var.green = info->var.blue = info->var.red;
242         info->screen_base = (u_char *) info->fix.smem_start;
243
244         err = fb_alloc_cmap(&info->cmap, 2, 0);
245         if (err < 0) {
246                 framebuffer_release(info);
247                 return err;
248         }
249
250         err = register_framebuffer(info);
251         if (err < 0) {
252                 fb_dealloc_cmap(&info->cmap);
253                 framebuffer_release(info);
254                 return err;
255         }
256         platform_set_drvdata(dev, info);
257
258         /* now we have registered we can safely setup the hardware */
259         out_8(AP_CONTROL_3A, RESET_CREG);
260         out_be16(AP_WRITE_ENABLE, 0x0);
261         out_8(AP_CONTROL_0, NORMAL_MODE);
262         out_8(AP_CONTROL_1, (AD_BLT | DST_EQ_SRC | NORM_CREG1));
263         out_8(AP_CONTROL_2, S_DATA_PLN);
264         out_be16(AP_ROP_1, SWAP(0x3));
265
266         printk("apollo frame buffer alive and kicking !\n");
267         return err;
268 }
269
270 static struct platform_driver dnfb_driver = {
271         .probe  = dnfb_probe,
272         .driver = {
273                 .name   = "dnfb",
274         },
275 };
276
277 static struct platform_device dnfb_device = {
278         .name   = "dnfb",
279 };
280
281 int __init dnfb_init(void)
282 {
283         int ret;
284
285         if (!MACH_IS_APOLLO)
286                 return -ENODEV;
287
288         if (fb_get_options("dnfb", NULL))
289                 return -ENODEV;
290
291         ret = platform_driver_register(&dnfb_driver);
292
293         if (!ret) {
294                 ret = platform_device_register(&dnfb_device);
295                 if (ret)
296                         platform_driver_unregister(&dnfb_driver);
297         }
298         return ret;
299 }
300
301 module_init(dnfb_init);
302
303 MODULE_LICENSE("GPL");