kernel/drivers/video/fbdev/aty/radeon_monitor.c

   1 #include "radeonfb.h"
   2
   3 #include <linux/slab.h>
   4
   5 #include "../edid.h"
   6
   7 static struct fb_var_screeninfo radeonfb_default_var = {
   8         .xres           = 640,
   9         .yres           = 480,
  10         .xres_virtual   = 640,
  11         .yres_virtual   = 480,
  12         .bits_per_pixel = 8,
  13         .red            = { .length = 8 },
  14         .green          = { .length = 8 },
  15         .blue           = { .length = 8 },
  16         .activate       = FB_ACTIVATE_NOW,
  17         .height         = -1,
  18         .width          = -1,
  19         .pixclock       = 39721,
  20         .left_margin    = 40,
  21         .right_margin   = 24,
  22         .upper_margin   = 32,
  23         .lower_margin   = 11,
  24         .hsync_len      = 96,
  25         .vsync_len      = 2,
  26         .vmode          = FB_VMODE_NONINTERLACED
  27 };
  28
  29 static char *radeon_get_mon_name(int type)
  30 {
  31         char *pret = NULL;
  32
  33         switch (type) {
  34                 case MT_NONE:
  35                         pret = "no";
  36                         break;
  37                 case MT_CRT:
  38                         pret = "CRT";
  39                         break;
  40                 case MT_DFP:
  41                         pret = "DFP";
  42                         break;
  43                 case MT_LCD:
  44                         pret = "LCD";
  45                         break;
  46                 case MT_CTV:
  47                         pret = "CTV";
  48                         break;
  49                 case MT_STV:
  50                         pret = "STV";
  51                         break;
  52         }
  53
  54         return pret;
  55 }
  56
  57
  58 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
  59 /*
  60  * Try to find monitor informations & EDID data out of the Open Firmware
  61  * device-tree. This also contains some "hacks" to work around a few machine
  62  * models with broken OF probing by hard-coding known EDIDs for some Mac
  63  * laptops internal LVDS panel. (XXX: not done yet)
  64  */
  65 static int radeon_parse_montype_prop(struct device_node *dp, u8 **out_EDID,
  66                                      int hdno)
  67 {
  68         static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID",
  69                                      "EDID1", "EDID2",  NULL };
  70         const u8 *pedid = NULL;
  71         const u8 *pmt = NULL;
  72         u8 *tmp;
  73         int i, mt = MT_NONE;
  74
  75         pr_debug("analyzing OF properties...\n");
  76         pmt = of_get_property(dp, "display-type", NULL);
  77         if (!pmt)
  78                 return MT_NONE;
  79         pr_debug("display-type: %s\n", pmt);
  80         /* OF says "LCD" for DFP as well, we discriminate from the caller of this
  81          * function
  82          */
  83         if (!strcmp(pmt, "LCD") || !strcmp(pmt, "DFP"))
  84                 mt = MT_DFP;
  85         else if (!strcmp(pmt, "CRT"))
  86                 mt = MT_CRT;
  87         else {
  88                 if (strcmp(pmt, "NONE") != 0)
  89                         printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n",
  90                                pmt);
  91                 return MT_NONE;
  92         }
  93
  94         for (i = 0; propnames[i] != NULL; ++i) {
  95                 pedid = of_get_property(dp, propnames[i], NULL);
  96                 if (pedid != NULL)
  97                         break;
  98         }
  99         /* We didn't find the EDID in the leaf node, some cards will actually
 100          * put EDID1/EDID2 in the parent, look for these (typically M6 tipb).
 101          * single-head cards have hdno == -1 and skip this step
 102          */
 103         if (pedid == NULL && dp->parent && (hdno != -1))
 104                 pedid = of_get_property(dp->parent,
 105                                 (hdno == 0) ? "EDID1" : "EDID2", NULL);
 106         if (pedid == NULL && dp->parent && (hdno == 0))
 107                 pedid = of_get_property(dp->parent, "EDID", NULL);
 108         if (pedid == NULL)
 109                 return mt;
 110
 111         tmp = kmemdup(pedid, EDID_LENGTH, GFP_KERNEL);
 112         if (!tmp)
 113                 return mt;
 114         *out_EDID = tmp;
 115         return mt;
 116 }
 117
 118 static int radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_no,
 119                                 u8 **out_EDID)
 120 {
 121         struct device_node *dp;
 122
 123         pr_debug("radeon_probe_OF_head\n");
 124
 125         dp = rinfo->of_node;
 126         while (dp == NULL)
 127                 return MT_NONE;
 128
 129         if (rinfo->has_CRTC2) {
 130                 const char *pname;
 131                 int len, second = 0;
 132
 133                 dp = dp->child;
 134                 do {
 135                         if (!dp)
 136                                 return MT_NONE;
 137                         pname = of_get_property(dp, "name", NULL);
 138                         if (!pname)
 139                                 return MT_NONE;
 140                         len = strlen(pname);
 141                         pr_debug("head: %s (letter: %c, head_no: %d)\n",
 142                                pname, pname[len-1], head_no);
 143                         if (pname[len-1] == 'A' && head_no == 0) {
 144                                 int mt = radeon_parse_montype_prop(dp, out_EDID, 0);
 145                                 /* Maybe check for LVDS_GEN_CNTL here ? I need to check out
 146                                  * what OF does when booting with lid closed
 147                                  */
 148                                 if (mt == MT_DFP && rinfo->is_mobility)
 149                                         mt = MT_LCD;
 150                                 return mt;
 151                         } else if (pname[len-1] == 'B' && head_no == 1)
 152                                 return radeon_parse_montype_prop(dp, out_EDID, 1);
 153                         second = 1;
 154                         dp = dp->sibling;
 155                 } while(!second);
 156         } else {
 157                 if (head_no > 0)
 158                         return MT_NONE;
 159                 return radeon_parse_montype_prop(dp, out_EDID, -1);
 160         }
 161         return MT_NONE;
 162 }
 163 #endif /* CONFIG_PPC || CONFIG_SPARC */
 164
 165
 166 static int radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo)
 167 {
 168         unsigned long tmp, tmp0;
 169         char stmp[30];
 170         int i;
 171
 172         if (!rinfo->bios_seg)
 173                 return 0;
 174
 175         if (!(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x40))) {
 176                 printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n");
 177                 rinfo->panel_info.pwr_delay = 200;
 178                 return 0;
 179         }
 180
 181         for(i=0; i<24; i++)
 182                 stmp[i] = BIOS_IN8(tmp+i+1);
 183         stmp[24] = 0;
 184         printk("radeonfb: panel ID string: %s\n", stmp);
 185         rinfo->panel_info.xres = BIOS_IN16(tmp + 25);
 186         rinfo->panel_info.yres = BIOS_IN16(tmp + 27);
 187         printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
 188                 rinfo->panel_info.xres, rinfo->panel_info.yres);
 189
 190         rinfo->panel_info.pwr_delay = BIOS_IN16(tmp + 44);
 191         pr_debug("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay);
 192         if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0)
 193                 rinfo->panel_info.pwr_delay = 2000;
 194
 195         /*
 196          * Some panels only work properly with some divider combinations
 197          */
 198         rinfo->panel_info.ref_divider = BIOS_IN16(tmp + 46);
 199         rinfo->panel_info.post_divider = BIOS_IN8(tmp + 48);
 200         rinfo->panel_info.fbk_divider = BIOS_IN16(tmp + 49);
 201         if (rinfo->panel_info.ref_divider != 0 &&
 202             rinfo->panel_info.fbk_divider > 3) {
 203                 rinfo->panel_info.use_bios_dividers = 1;
 204                 printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n");
 205                 pr_debug("ref_divider = %x\n", rinfo->panel_info.ref_divider);
 206                 pr_debug("post_divider = %x\n", rinfo->panel_info.post_divider);
 207                 pr_debug("fbk_divider = %x\n", rinfo->panel_info.fbk_divider);
 208         }
 209         pr_debug("Scanning BIOS table ...\n");
 210         for(i=0; i<32; i++) {
 211                 tmp0 = BIOS_IN16(tmp+64+i*2);
 212                 if (tmp0 == 0)
 213                         break;
 214                 pr_debug(" %d x %d\n", BIOS_IN16(tmp0), BIOS_IN16(tmp0+2));
 215                 if ((BIOS_IN16(tmp0) == rinfo->panel_info.xres) &&
 216                     (BIOS_IN16(tmp0+2) == rinfo->panel_info.yres)) {
 217                         rinfo->panel_info.hblank = (BIOS_IN16(tmp0+17) - BIOS_IN16(tmp0+19)) * 8;
 218                         rinfo->panel_info.hOver_plus = ((BIOS_IN16(tmp0+21) -
 219                                                          BIOS_IN16(tmp0+19) -1) * 8) & 0x7fff;
 220                         rinfo->panel_info.hSync_width = BIOS_IN8(tmp0+23) * 8;
 221                         rinfo->panel_info.vblank = BIOS_IN16(tmp0+24) - BIOS_IN16(tmp0+26);
 222                         rinfo->panel_info.vOver_plus = (BIOS_IN16(tmp0+28) & 0x7ff) - BIOS_IN16(tmp0+26);
 223                         rinfo->panel_info.vSync_width = (BIOS_IN16(tmp0+28) & 0xf800) >> 11;
 224                         rinfo->panel_info.clock = BIOS_IN16(tmp0+9);
 225                         /* Assume high active syncs for now until ATI tells me more... maybe we
 226                          * can probe register values here ?
 227                          */
 228                         rinfo->panel_info.hAct_high = 1;
 229                         rinfo->panel_info.vAct_high = 1;
 230                         /* Mark panel infos valid */
 231                         rinfo->panel_info.valid = 1;
 232
 233                         pr_debug("Found panel in BIOS table:\n");
 234                         pr_debug("  hblank: %d\n", rinfo->panel_info.hblank);
 235                         pr_debug("  hOver_plus: %d\n", rinfo->panel_info.hOver_plus);
 236                         pr_debug("  hSync_width: %d\n", rinfo->panel_info.hSync_width);
 237                         pr_debug("  vblank: %d\n", rinfo->panel_info.vblank);
 238                         pr_debug("  vOver_plus: %d\n", rinfo->panel_info.vOver_plus);
 239                         pr_debug("  vSync_width: %d\n", rinfo->panel_info.vSync_width);
 240                         pr_debug("  clock: %d\n", rinfo->panel_info.clock);
 241
 242                         return 1;
 243                 }
 244         }
 245         pr_debug("Didn't find panel in BIOS table !\n");
 246
 247         return 0;
 248 }
 249
 250 /* Try to extract the connector informations from the BIOS. This
 251  * doesn't quite work yet, but it's output is still useful for
 252  * debugging
 253  */
 254 static void radeon_parse_connector_info(struct radeonfb_info *rinfo)
 255 {
 256         int offset, chips, connectors, tmp, i, conn, type;
 257
 258         static char* __conn_type_table[16] = {
 259                 "NONE", "Proprietary", "CRT", "DVI-I", "DVI-D", "Unknown", "Unknown",
 260                 "Unknown", "Unknown", "Unknown", "Unknown", "Unknown", "Unknown",
 261                 "Unknown", "Unknown", "Unknown"
 262         };
 263
 264         if (!rinfo->bios_seg)
 265                 return;
 266
 267         offset = BIOS_IN16(rinfo->fp_bios_start + 0x50);
 268         if (offset == 0) {
 269                 printk(KERN_WARNING "radeonfb: No connector info table detected\n");
 270                 return;
 271         }
 272
 273         /* Don't do much more at this point but displaying the data if
 274          * DEBUG is enabled
 275          */
 276         chips = BIOS_IN8(offset++) >> 4;
 277         pr_debug("%d chips in connector info\n", chips);
 278         for (i = 0; i < chips; i++) {
 279                 tmp = BIOS_IN8(offset++);
 280                 connectors = tmp & 0x0f;
 281                 pr_debug(" - chip %d has %d connectors\n", tmp >> 4, connectors);
 282                 for (conn = 0; ; conn++) {
 283                         tmp = BIOS_IN16(offset);
 284                         if (tmp == 0)
 285                                 break;
 286                         offset += 2;
 287                         type = (tmp >> 12) & 0x0f;
 288                         pr_debug("  * connector %d of type %d (%s) : %04x\n",
 289                                conn, type, __conn_type_table[type], tmp);
 290                 }
 291         }
 292 }
 293
 294
 295 /*
 296  * Probe physical connection of a CRT. This code comes from XFree
 297  * as well and currently is only implemented for the CRT DAC, the
 298  * code for the TVDAC is commented out in XFree as "non working"
 299  */
 300 static int radeon_crt_is_connected(struct radeonfb_info *rinfo, int is_crt_dac)
 301 {
 302     int           connected = 0;
 303
 304     /* the monitor either wasn't connected or it is a non-DDC CRT.
 305      * try to probe it
 306      */
 307     if (is_crt_dac) {
 308         unsigned long ulOrigVCLK_ECP_CNTL;
 309         unsigned long ulOrigDAC_CNTL;
 310         unsigned long ulOrigDAC_EXT_CNTL;
 311         unsigned long ulOrigCRTC_EXT_CNTL;
 312         unsigned long ulData;
 313         unsigned long ulMask;
 314
 315         ulOrigVCLK_ECP_CNTL = INPLL(VCLK_ECP_CNTL);
 316
 317         ulData              = ulOrigVCLK_ECP_CNTL;
 318         ulData             &= ~(PIXCLK_ALWAYS_ONb
 319                                 | PIXCLK_DAC_ALWAYS_ONb);
 320         ulMask              = ~(PIXCLK_ALWAYS_ONb
 321                                 | PIXCLK_DAC_ALWAYS_ONb);
 322         OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
 323
 324         ulOrigCRTC_EXT_CNTL = INREG(CRTC_EXT_CNTL);
 325         ulData              = ulOrigCRTC_EXT_CNTL;
 326         ulData             |= CRTC_CRT_ON;
 327         OUTREG(CRTC_EXT_CNTL, ulData);
 328
 329         ulOrigDAC_EXT_CNTL = INREG(DAC_EXT_CNTL);
 330         ulData             = ulOrigDAC_EXT_CNTL;
 331         ulData            &= ~DAC_FORCE_DATA_MASK;
 332         ulData            |=  (DAC_FORCE_BLANK_OFF_EN
 333                                |DAC_FORCE_DATA_EN
 334                                |DAC_FORCE_DATA_SEL_MASK);
 335         if ((rinfo->family == CHIP_FAMILY_RV250) ||
 336             (rinfo->family == CHIP_FAMILY_RV280))
 337             ulData |= (0x01b6 << DAC_FORCE_DATA_SHIFT);
 338         else
 339             ulData |= (0x01ac << DAC_FORCE_DATA_SHIFT);
 340
 341         OUTREG(DAC_EXT_CNTL, ulData);
 342
 343         ulOrigDAC_CNTL     = INREG(DAC_CNTL);
 344         ulData             = ulOrigDAC_CNTL;
 345         ulData            |= DAC_CMP_EN;
 346         ulData            &= ~(DAC_RANGE_CNTL_MASK
 347                                | DAC_PDWN);
 348         ulData            |= 0x2;
 349         OUTREG(DAC_CNTL, ulData);
 350
 351         mdelay(1);
 352
 353         ulData     = INREG(DAC_CNTL);
 354         connected =  (DAC_CMP_OUTPUT & ulData) ? 1 : 0;
 355
 356         ulData    = ulOrigVCLK_ECP_CNTL;
 357         ulMask    = 0xFFFFFFFFL;
 358         OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
 359
 360         OUTREG(DAC_CNTL,      ulOrigDAC_CNTL     );
 361         OUTREG(DAC_EXT_CNTL,  ulOrigDAC_EXT_CNTL );
 362         OUTREG(CRTC_EXT_CNTL, ulOrigCRTC_EXT_CNTL);
 363     }
 364
 365     return connected ? MT_CRT : MT_NONE;
 366 }
 367
 368 /*
 369  * Parse the "monitor_layout" string if any. This code is mostly
 370  * copied from XFree's radeon driver
 371  */
 372 static int radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
 373                                        const char *monitor_layout)
 374 {
 375         char s1[5], s2[5];
 376         int i = 0, second = 0;
 377         const char *s;
 378
 379         if (!monitor_layout)
 380                 return 0;
 381
 382         s = monitor_layout;
 383         do {
 384                 switch(*s) {
 385                 case ',':
 386                         s1[i] = '\0';
 387                         i = 0;
 388                         second = 1;
 389                         break;
 390                 case ' ':
 391                 case '\0':
 392                         break;
 393                 default:
 394                         if (i > 4)
 395                                 break;
 396                         if (second)
 397                                 s2[i] = *s;
 398                         else
 399                                 s1[i] = *s;
 400                         i++;
 401                 }
 402
 403                 if (i > 4)
 404                         i = 4;
 405
 406         } while (*s++);
 407         if (second)
 408                 s2[i] = 0;
 409         else {
 410                 s1[i] = 0;
 411                 s2[0] = 0;
 412         }
 413         if (strcmp(s1, "CRT") == 0)
 414                 rinfo->mon1_type = MT_CRT;
 415         else if (strcmp(s1, "TMDS") == 0)
 416                 rinfo->mon1_type = MT_DFP;
 417         else if (strcmp(s1, "LVDS") == 0)
 418                 rinfo->mon1_type = MT_LCD;
 419
 420         if (strcmp(s2, "CRT") == 0)
 421                 rinfo->mon2_type = MT_CRT;
 422         else if (strcmp(s2, "TMDS") == 0)
 423                 rinfo->mon2_type = MT_DFP;
 424         else if (strcmp(s2, "LVDS") == 0)
 425                 rinfo->mon2_type = MT_LCD;
 426
 427         return 1;
 428 }
 429
 430 /*
 431  * Probe display on both primary and secondary card's connector (if any)
 432  * by various available techniques (i2c, OF device tree, BIOS, ...) and
 433  * try to retrieve EDID. The algorithm here comes from XFree's radeon
 434  * driver
 435  */
 436 void radeon_probe_screens(struct radeonfb_info *rinfo,
 437                           const char *monitor_layout, int ignore_edid)
 438 {
 439 #ifdef CONFIG_FB_RADEON_I2C
 440         int ddc_crt2_used = 0;
 441 #endif
 442         int tmp, i;
 443
 444         radeon_parse_connector_info(rinfo);
 445
 446         if (radeon_parse_monitor_layout(rinfo, monitor_layout)) {
 447
 448                 /*
 449                  * If user specified a monitor_layout option, use it instead
 450                  * of auto-detecting. Maybe we should only use this argument
 451                  * on the first radeon card probed or provide a way to specify
 452                  * a layout for each card ?
 453                  */
 454
 455                 pr_debug("Using specified monitor layout: %s", monitor_layout);
 456 #ifdef CONFIG_FB_RADEON_I2C
 457                 if (!ignore_edid) {
 458                         if (rinfo->mon1_type != MT_NONE)
 459                                 if (!radeon_probe_i2c_connector(rinfo, ddc_dvi, &rinfo->mon1_EDID)) {
 460                                         radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon1_EDID);
 461                                         ddc_crt2_used = 1;
 462                                 }
 463                         if (rinfo->mon2_type != MT_NONE)
 464                                 if (!radeon_probe_i2c_connector(rinfo, ddc_vga, &rinfo->mon2_EDID) &&
 465                                     !ddc_crt2_used)
 466                                         radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon2_EDID);
 467                 }
 468 #endif /* CONFIG_FB_RADEON_I2C */
 469                 if (rinfo->mon1_type == MT_NONE) {
 470                         if (rinfo->mon2_type != MT_NONE) {
 471                                 rinfo->mon1_type = rinfo->mon2_type;
 472                                 rinfo->mon1_EDID = rinfo->mon2_EDID;
 473                         } else {
 474                                 rinfo->mon1_type = MT_CRT;
 475                                 printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n");
 476                         }
 477                         rinfo->mon2_type = MT_NONE;
 478                         rinfo->mon2_EDID = NULL;
 479                 }
 480         } else {
 481                 /*
 482                  * Auto-detecting display type (well... trying to ...)
 483                  */
 484
 485                 pr_debug("Starting monitor auto detection...\n");
 486
 487 #if defined(DEBUG) && defined(CONFIG_FB_RADEON_I2C)
 488                 {
 489                         u8 *EDIDs[4] = { NULL, NULL, NULL, NULL };
 490                         int mon_types[4] = {MT_NONE, MT_NONE, MT_NONE, MT_NONE};
 491                         int i;
 492
 493                         for (i = 0; i < 4; i++)
 494                                 mon_types[i] = radeon_probe_i2c_connector(rinfo,
 495                                                                           i+1, &EDIDs[i]);
 496                 }
 497 #endif /* DEBUG */
 498                 /*
 499                  * Old single head cards
 500                  */
 501                 if (!rinfo->has_CRTC2) {
 502 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
 503                         if (rinfo->mon1_type == MT_NONE)
 504                                 rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
 505                                                                         &rinfo->mon1_EDID);
 506 #endif /* CONFIG_PPC || CONFIG_SPARC */
 507 #ifdef CONFIG_FB_RADEON_I2C
 508                         if (rinfo->mon1_type == MT_NONE)
 509                                 rinfo->mon1_type =
 510                                         radeon_probe_i2c_connector(rinfo, ddc_dvi,
 511                                                                    &rinfo->mon1_EDID);
 512                         if (rinfo->mon1_type == MT_NONE)
 513                                 rinfo->mon1_type =
 514                                         radeon_probe_i2c_connector(rinfo, ddc_vga,
 515                                                                    &rinfo->mon1_EDID);
 516                         if (rinfo->mon1_type == MT_NONE)
 517                                 rinfo->mon1_type =
 518                                         radeon_probe_i2c_connector(rinfo, ddc_crt2,
 519                                                                    &rinfo->mon1_EDID);
 520 #endif /* CONFIG_FB_RADEON_I2C */
 521                         if (rinfo->mon1_type == MT_NONE)
 522                                 rinfo->mon1_type = MT_CRT;
 523                         goto bail;
 524                 }
 525
 526                 /*
 527                  * Check for cards with reversed DACs or TMDS controllers using BIOS
 528                  */
 529                 if (rinfo->bios_seg &&
 530                     (tmp = BIOS_IN16(rinfo->fp_bios_start + 0x50))) {
 531                         for (i = 1; i < 4; i++) {
 532                                 unsigned int tmp0;
 533
 534                                 if (!BIOS_IN8(tmp + i*2) && i > 1)
 535                                         break;
 536                                 tmp0 = BIOS_IN16(tmp + i*2);
 537                                 if ((!(tmp0 & 0x01)) && (((tmp0 >> 8) & 0x0f) == ddc_dvi)) {
 538                                         rinfo->reversed_DAC = 1;
 539                                         printk(KERN_INFO "radeonfb: Reversed DACs detected\n");
 540                                 }
 541                                 if ((((tmp0 >> 8) & 0x0f) == ddc_dvi) && ((tmp0 >> 4) & 0x01)) {
 542                                         rinfo->reversed_TMDS = 1;
 543                                         printk(KERN_INFO "radeonfb: Reversed TMDS detected\n");
 544                                 }
 545                         }
 546                 }
 547
 548                 /*
 549                  * Probe primary head (DVI or laptop internal panel)
 550                  */
 551 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
 552                 if (rinfo->mon1_type == MT_NONE)
 553                         rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
 554                                                                 &rinfo->mon1_EDID);
 555 #endif /* CONFIG_PPC || CONFIG_SPARC */
 556 #ifdef CONFIG_FB_RADEON_I2C
 557                 if (rinfo->mon1_type == MT_NONE)
 558                         rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_dvi,
 559                                                                       &rinfo->mon1_EDID);
 560                 if (rinfo->mon1_type == MT_NONE) {
 561                         rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
 562                                                                       &rinfo->mon1_EDID);
 563                         if (rinfo->mon1_type != MT_NONE)
 564                                 ddc_crt2_used = 1;
 565                 }
 566 #endif /* CONFIG_FB_RADEON_I2C */
 567                 if (rinfo->mon1_type == MT_NONE && rinfo->is_mobility &&
 568                     ((rinfo->bios_seg && (INREG(BIOS_4_SCRATCH) & 4))
 569                      || (INREG(LVDS_GEN_CNTL) & LVDS_ON))) {
 570                         rinfo->mon1_type = MT_LCD;
 571                         printk("Non-DDC laptop panel detected\n");
 572                 }
 573                 if (rinfo->mon1_type == MT_NONE)
 574                         rinfo->mon1_type = radeon_crt_is_connected(rinfo, rinfo->reversed_DAC);
 575
 576                 /*
 577                  * Probe secondary head (mostly VGA, can be DVI)
 578                  */
 579 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
 580                 if (rinfo->mon2_type == MT_NONE)
 581                         rinfo->mon2_type = radeon_probe_OF_head(rinfo, 1,
 582                                                                 &rinfo->mon2_EDID);
 583 #endif /* CONFIG_PPC || defined(CONFIG_SPARC) */
 584 #ifdef CONFIG_FB_RADEON_I2C
 585                 if (rinfo->mon2_type == MT_NONE)
 586                         rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_vga,
 587                                                                       &rinfo->mon2_EDID);
 588                 if (rinfo->mon2_type == MT_NONE && !ddc_crt2_used)
 589                         rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
 590                                                                       &rinfo->mon2_EDID);
 591 #endif /* CONFIG_FB_RADEON_I2C */
 592                 if (rinfo->mon2_type == MT_NONE)
 593                         rinfo->mon2_type = radeon_crt_is_connected(rinfo, !rinfo->reversed_DAC);
 594
 595                 /*
 596                  * If we only detected port 2, we swap them, if none detected,
 597                  * assume CRT (maybe fallback to old BIOS_SCRATCH stuff ? or look
 598                  * at FP registers ?)
 599                  */
 600                 if (rinfo->mon1_type == MT_NONE) {
 601                         if (rinfo->mon2_type != MT_NONE) {
 602                                 rinfo->mon1_type = rinfo->mon2_type;
 603                                 rinfo->mon1_EDID = rinfo->mon2_EDID;
 604                         } else
 605                                 rinfo->mon1_type = MT_CRT;
 606                         rinfo->mon2_type = MT_NONE;
 607                         rinfo->mon2_EDID = NULL;
 608                 }
 609
 610                 /*
 611                  * Deal with reversed TMDS
 612                  */
 613                 if (rinfo->reversed_TMDS) {
 614                         /* Always keep internal TMDS as primary head */
 615                         if (rinfo->mon1_type == MT_DFP || rinfo->mon2_type == MT_DFP) {
 616                                 int tmp_type = rinfo->mon1_type;
 617                                 u8 *tmp_EDID = rinfo->mon1_EDID;
 618                                 rinfo->mon1_type = rinfo->mon2_type;
 619                                 rinfo->mon1_EDID = rinfo->mon2_EDID;
 620                                 rinfo->mon2_type = tmp_type;
 621                                 rinfo->mon2_EDID = tmp_EDID;
 622                                 if (rinfo->mon1_type == MT_CRT || rinfo->mon2_type == MT_CRT)
 623                                         rinfo->reversed_DAC ^= 1;
 624                         }
 625                 }
 626         }
 627         if (ignore_edid) {
 628                 kfree(rinfo->mon1_EDID);
 629                 rinfo->mon1_EDID = NULL;
 630                 kfree(rinfo->mon2_EDID);
 631                 rinfo->mon2_EDID = NULL;
 632         }
 633
 634  bail:
 635         printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n",
 636                radeon_get_mon_name(rinfo->mon1_type));
 637         if (rinfo->mon1_EDID)
 638                 printk(KERN_INFO "radeonfb: EDID probed\n");
 639         if (!rinfo->has_CRTC2)
 640                 return;
 641         printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n",
 642                radeon_get_mon_name(rinfo->mon2_type));
 643         if (rinfo->mon2_EDID)
 644                 printk(KERN_INFO "radeonfb: EDID probed\n");
 645 }
 646
 647
 648 /*
 649  * This functions applyes any arch/model/machine specific fixups
 650  * to the panel info. It may eventually alter EDID block as
 651  * well or whatever is specific to a given model and not probed
 652  * properly by the default code
 653  */
 654 static void radeon_fixup_panel_info(struct radeonfb_info *rinfo)
 655 {
 656 #ifdef CONFIG_PPC
 657         /*
 658          * LCD Flat panels should use fixed dividers, we enfore that on
 659          * PPC only for now...
 660          */
 661         if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type == MT_LCD
 662             && rinfo->is_mobility) {
 663                 int ppll_div_sel;
 664                 u32 ppll_divn;
 665                 ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3;
 666                 radeon_pll_errata_after_index(rinfo);
 667                 ppll_divn = INPLL(PPLL_DIV_0 + ppll_div_sel);
 668                 rinfo->panel_info.ref_divider = rinfo->pll.ref_div;
 669                 rinfo->panel_info.fbk_divider = ppll_divn & 0x7ff;
 670                 rinfo->panel_info.post_divider = (ppll_divn >> 16) & 0x7;
 671                 rinfo->panel_info.use_bios_dividers = 1;
 672
 673                 printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x "
 674                        "from PPLL %d\n",
 675                        rinfo->panel_info.fbk_divider |
 676                        (rinfo->panel_info.post_divider << 16),
 677                        ppll_div_sel);
 678         }
 679 #endif /* CONFIG_PPC */
 680 }
 681
 682
 683 /*
 684  * Fill up panel infos from a mode definition, either returned by the EDID
 685  * or from the default mode when we can't do any better
 686  */
 687 static void radeon_var_to_panel_info(struct radeonfb_info *rinfo, struct fb_var_screeninfo *var)
 688 {
 689         rinfo->panel_info.xres = var->xres;
 690         rinfo->panel_info.yres = var->yres;
 691         rinfo->panel_info.clock = 100000000 / var->pixclock;
 692         rinfo->panel_info.hOver_plus = var->right_margin;
 693         rinfo->panel_info.hSync_width = var->hsync_len;
 694         rinfo->panel_info.hblank = var->left_margin +
 695                 (var->right_margin + var->hsync_len);
 696         rinfo->panel_info.vOver_plus = var->lower_margin;
 697         rinfo->panel_info.vSync_width = var->vsync_len;
 698         rinfo->panel_info.vblank = var->upper_margin +
 699                 (var->lower_margin + var->vsync_len);
 700         rinfo->panel_info.hAct_high =
 701                 (var->sync & FB_SYNC_HOR_HIGH_ACT) != 0;
 702         rinfo->panel_info.vAct_high =
 703                 (var->sync & FB_SYNC_VERT_HIGH_ACT) != 0;
 704         rinfo->panel_info.valid = 1;
 705         /* We use a default of 200ms for the panel power delay,
 706          * I need to have a real schedule() instead of mdelay's in the panel code.
 707          * we might be possible to figure out a better power delay either from
 708          * MacOS OF tree or from the EDID block (proprietary extensions ?)
 709          */
 710         rinfo->panel_info.pwr_delay = 200;
 711 }
 712
 713 static void radeon_videomode_to_var(struct fb_var_screeninfo *var,
 714                                     const struct fb_videomode *mode)
 715 {
 716         var->xres = mode->xres;
 717         var->yres = mode->yres;
 718         var->xres_virtual = mode->xres;
 719         var->yres_virtual = mode->yres;
 720         var->xoffset = 0;
 721         var->yoffset = 0;
 722         var->pixclock = mode->pixclock;
 723         var->left_margin = mode->left_margin;
 724         var->right_margin = mode->right_margin;
 725         var->upper_margin = mode->upper_margin;
 726         var->lower_margin = mode->lower_margin;
 727         var->hsync_len = mode->hsync_len;
 728         var->vsync_len = mode->vsync_len;
 729         var->sync = mode->sync;
 730         var->vmode = mode->vmode;
 731 }
 732
 733 #ifdef CONFIG_PPC_PSERIES
 734 static int is_powerblade(const char *model)
 735 {
 736         struct device_node *root;
 737         const char* cp;
 738         int len, l, rc = 0;
 739
 740         root = of_find_node_by_path("/");
 741         if (root && model) {
 742                 l = strlen(model);
 743                 cp = of_get_property(root, "model", &len);
 744                 if (cp)
 745                         rc = memcmp(model, cp, min(len, l)) == 0;
 746                 of_node_put(root);
 747         }
 748         return rc;
 749 }
 750 #endif
 751
 752 /*
 753  * Build the modedb for head 1 (head 2 will come later), check panel infos
 754  * from either BIOS or EDID, and pick up the default mode
 755  */
 756 void radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_option)
 757 {
 758         struct fb_info * info = rinfo->info;
 759         int has_default_mode = 0;
 760
 761         /*
 762          * Fill default var first
 763          */
 764         info->var = radeonfb_default_var;
 765         INIT_LIST_HEAD(&info->modelist);
 766
 767         /*
 768          * First check out what BIOS has to say
 769          */
 770         if (rinfo->mon1_type == MT_LCD)
 771                 radeon_get_panel_info_BIOS(rinfo);
 772
 773         /*
 774          * Parse EDID detailed timings and deduce panel infos if any. Right now
 775          * we only deal with first entry returned by parse_EDID, we may do better
 776          * some day...
 777          */
 778         if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type != MT_CRT
 779             && rinfo->mon1_EDID) {
 780                 struct fb_var_screeninfo var;
 781                 pr_debug("Parsing EDID data for panel info\n");
 782                 if (fb_parse_edid(rinfo->mon1_EDID, &var) == 0) {
 783                         if (var.xres >= rinfo->panel_info.xres &&
 784                             var.yres >= rinfo->panel_info.yres)
 785                                 radeon_var_to_panel_info(rinfo, &var);
 786                 }
 787         }
 788
 789         /*
 790          * Do any additional platform/arch fixups to the panel infos
 791          */
 792         radeon_fixup_panel_info(rinfo);
 793
 794         /*
 795          * If we have some valid panel infos, we setup the default mode based on
 796          * those
 797          */
 798         if (rinfo->mon1_type != MT_CRT && rinfo->panel_info.valid) {
 799                 struct fb_var_screeninfo *var = &info->var;
 800
 801                 pr_debug("Setting up default mode based on panel info\n");
 802                 var->xres = rinfo->panel_info.xres;
 803                 var->yres = rinfo->panel_info.yres;
 804                 var->xres_virtual = rinfo->panel_info.xres;
 805                 var->yres_virtual = rinfo->panel_info.yres;
 806                 var->xoffset = var->yoffset = 0;
 807                 var->bits_per_pixel = 8;
 808                 var->pixclock = 100000000 / rinfo->panel_info.clock;
 809                 var->left_margin = (rinfo->panel_info.hblank - rinfo->panel_info.hOver_plus
 810                                     - rinfo->panel_info.hSync_width);
 811                 var->right_margin = rinfo->panel_info.hOver_plus;
 812                 var->upper_margin = (rinfo->panel_info.vblank - rinfo->panel_info.vOver_plus
 813                                      - rinfo->panel_info.vSync_width);
 814                 var->lower_margin = rinfo->panel_info.vOver_plus;
 815                 var->hsync_len = rinfo->panel_info.hSync_width;
 816                 var->vsync_len = rinfo->panel_info.vSync_width;
 817                 var->sync = 0;
 818                 if (rinfo->panel_info.hAct_high)
 819                         var->sync |= FB_SYNC_HOR_HIGH_ACT;
 820                 if (rinfo->panel_info.vAct_high)
 821                         var->sync |= FB_SYNC_VERT_HIGH_ACT;
 822                 var->vmode = 0;
 823                 has_default_mode = 1;
 824         }
 825
 826         /*
 827          * Now build modedb from EDID
 828          */
 829         if (rinfo->mon1_EDID) {
 830                 fb_edid_to_monspecs(rinfo->mon1_EDID, &info->monspecs);
 831                 fb_videomode_to_modelist(info->monspecs.modedb,
 832                                          info->monspecs.modedb_len,
 833                                          &info->modelist);
 834                 rinfo->mon1_modedb = info->monspecs.modedb;
 835                 rinfo->mon1_dbsize = info->monspecs.modedb_len;
 836         }
 837
 838
 839         /*
 840          * Finally, if we don't have panel infos we need to figure some (or
 841          * we try to read it from card), we try to pick a default mode
 842          * and create some panel infos. Whatever...
 843          */
 844         if (rinfo->mon1_type != MT_CRT && !rinfo->panel_info.valid) {
 845                 struct fb_videomode     *modedb;
 846                 int                     dbsize;
 847                 char                    modename[32];
 848
 849                 pr_debug("Guessing panel info...\n");
 850                 if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
 851                         u32 tmp = INREG(FP_HORZ_STRETCH) & HORZ_PANEL_SIZE;
 852                         rinfo->panel_info.xres = ((tmp >> HORZ_PANEL_SHIFT) + 1) * 8;
 853                         tmp = INREG(FP_VERT_STRETCH) & VERT_PANEL_SIZE;
 854                         rinfo->panel_info.yres = (tmp >> VERT_PANEL_SHIFT) + 1;
 855                 }
 856                 if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
 857                         printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n");
 858                         rinfo->mon1_type = MT_CRT;
 859                         goto pickup_default;
 860                 }
 861                 printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n",
 862                        rinfo->panel_info.xres, rinfo->panel_info.yres);
 863                 modedb = rinfo->mon1_modedb;
 864                 dbsize = rinfo->mon1_dbsize;
 865                 snprintf(modename, 31, "%dx%d", rinfo->panel_info.xres, rinfo->panel_info.yres);
 866                 if (fb_find_mode(&info->var, info, modename,
 867                                  modedb, dbsize, NULL, 8) == 0) {
 868                         printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n");
 869                         rinfo->mon1_type = MT_CRT;
 870                         goto pickup_default;
 871                 }
 872                 has_default_mode = 1;
 873                 radeon_var_to_panel_info(rinfo, &info->var);
 874         }
 875
 876  pickup_default:
 877         /*
 878          * Apply passed-in mode option if any
 879          */
 880         if (mode_option) {
 881                 if (fb_find_mode(&info->var, info, mode_option,
 882                                  info->monspecs.modedb,
 883                                  info->monspecs.modedb_len, NULL, 8) != 0)
 884                         has_default_mode = 1;
 885         }
 886
 887 #ifdef CONFIG_PPC_PSERIES
 888         if (!has_default_mode && (
 889                 is_powerblade("IBM,8842") || /* JS20 */
 890                 is_powerblade("IBM,8844") || /* JS21 */
 891                 is_powerblade("IBM,7998") || /* JS12/JS21/JS22 */
 892                 is_powerblade("IBM,0792") || /* QS21 */
 893                 is_powerblade("IBM,0793")    /* QS22 */
 894             )) {
 895                 printk("Falling back to 800x600 on JSxx hardware\n");
 896                 if (fb_find_mode(&info->var, info, "800x600@60",
 897                                  info->monspecs.modedb,
 898                                  info->monspecs.modedb_len, NULL, 8) != 0)
 899                         has_default_mode = 1;
 900         }
 901 #endif
 902
 903         /*
 904          * Still no mode, let's pick up a default from the db
 905          */
 906         if (!has_default_mode && info->monspecs.modedb != NULL) {
 907                 struct fb_monspecs *specs = &info->monspecs;
 908                 struct fb_videomode *modedb = NULL;
 909
 910                 /* get preferred timing */
 911                 if (specs->misc & FB_MISC_1ST_DETAIL) {
 912                         int i;
 913
 914                         for (i = 0; i < specs->modedb_len; i++) {
 915                                 if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
 916                                         modedb = &specs->modedb[i];
 917                                         break;
 918                                 }
 919                         }
 920                 } else {
 921                         /* otherwise, get first mode in database */
 922                         modedb = &specs->modedb[0];
 923                 }
 924                 if (modedb != NULL) {
 925                         info->var.bits_per_pixel = 8;
 926                         radeon_videomode_to_var(&info->var, modedb);
 927                         has_default_mode = 1;
 928                 }
 929         }
 930         if (1) {
 931                 struct fb_videomode mode;
 932                 /* Make sure that whatever mode got selected is actually in the
 933                  * modelist or the kernel may die
 934                  */
 935                 fb_var_to_videomode(&mode, &info->var);
 936                 fb_add_videomode(&mode, &info->modelist);
 937         }
 938 }
 939
 940 /*
 941  * The code below is used to pick up a mode in check_var and
 942  * set_var. It should be made generic
 943  */
 944
 945 /*
 946  * This is used when looking for modes. We assign a "distance" value
 947  * to a mode in the modedb depending how "close" it is from what we
 948  * are looking for.
 949  * Currently, we don't compare that much, we could do better but
 950  * the current fbcon doesn't quite mind ;)
 951  */
 952 static int radeon_compare_modes(const struct fb_var_screeninfo *var,
 953                                 const struct fb_videomode *mode)
 954 {
 955         int distance = 0;
 956
 957         distance = mode->yres - var->yres;
 958         distance += (mode->xres - var->xres)/2;
 959         return distance;
 960 }
 961
 962 /*
 963  * This function is called by check_var, it gets the passed in mode parameter, and
 964  * outputs a valid mode matching the passed-in one as closely as possible.
 965  * We need something better ultimately. Things like fbcon basically pass us out
 966  * current mode with xres/yres hacked, while things like XFree will actually
 967  * produce a full timing that we should respect as much as possible.
 968  *
 969  * This is why I added the FB_ACTIVATE_FIND that is used by fbcon. Without this,
 970  * we do a simple spec match, that's all. With it, we actually look for a mode in
 971  * either our monitor modedb or the vesa one if none
 972  *
 973  */
 974 int  radeon_match_mode(struct radeonfb_info *rinfo,
 975                        struct fb_var_screeninfo *dest,
 976                        const struct fb_var_screeninfo *src)
 977 {
 978         const struct fb_videomode       *db = vesa_modes;
 979         int                             i, dbsize = 34;
 980         int                             has_rmx, native_db = 0;
 981         int                             distance = INT_MAX;
 982         const struct fb_videomode       *candidate = NULL;
 983
 984         /* Start with a copy of the requested mode */
 985         memcpy(dest, src, sizeof(struct fb_var_screeninfo));
 986
 987         /* Check if we have a modedb built from EDID */
 988         if (rinfo->mon1_modedb) {
 989                 db = rinfo->mon1_modedb;
 990                 dbsize = rinfo->mon1_dbsize;
 991                 native_db = 1;
 992         }
 993
 994         /* Check if we have a scaler allowing any fancy mode */
 995         has_rmx = rinfo->mon1_type == MT_LCD || rinfo->mon1_type == MT_DFP;
 996
 997         /* If we have a scaler and are passed FB_ACTIVATE_TEST or
 998          * FB_ACTIVATE_NOW, just do basic checking and return if the
 999          * mode match
1000          */
1001         if ((src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_TEST ||
1002             (src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) {
1003                 /* We don't have an RMX, validate timings. If we don't have
1004                  * monspecs, we should be paranoid and not let use go above
1005                  * 640x480-60, but I assume userland knows what it's doing here
1006                  * (though I may be proven wrong...)
1007                  */
1008                 if (has_rmx == 0 && rinfo->mon1_modedb)
1009                         if (fb_validate_mode((struct fb_var_screeninfo *)src, rinfo->info))
1010                                 return -EINVAL;
1011                 return 0;
1012         }
1013
1014         /* Now look for a mode in the database */
1015         while (db) {
1016                 for (i = 0; i < dbsize; i++) {
1017                         int d;
1018
1019                         if (db[i].yres < src->yres)
1020                                 continue;
1021                         if (db[i].xres < src->xres)
1022                                 continue;
1023                         d = radeon_compare_modes(src, &db[i]);
1024                         /* If the new mode is at least as good as the previous one,
1025                          * then it's our new candidate
1026                          */
1027                         if (d < distance) {
1028                                 candidate = &db[i];
1029                                 distance = d;
1030                         }
1031                 }
1032                 db = NULL;
1033                 /* If we have a scaler, we allow any mode from the database */
1034                 if (native_db && has_rmx) {
1035                         db = vesa_modes;
1036                         dbsize = 34;
1037                         native_db = 0;
1038                 }
1039         }
1040
1041         /* If we have found a match, return it */
1042         if (candidate != NULL) {
1043                 radeon_videomode_to_var(dest, candidate);
1044                 return 0;
1045         }
1046
1047         /* If we haven't and don't have a scaler, fail */
1048         if (!has_rmx)
1049                 return -EINVAL;
1050
1051         return 0;
1052 }