kernel/drivers/usb/phy/phy-mxs-usb.c

   1 /*
   2  * Copyright 2012-2014 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
   4  * on behalf of DENX Software Engineering GmbH
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/clk.h>
  18 #include <linux/usb/otg.h>
  19 #include <linux/stmp_device.h>
  20 #include <linux/delay.h>
  21 #include <linux/err.h>
  22 #include <linux/io.h>
  23 #include <linux/of_device.h>
  24 #include <linux/regmap.h>
  25 #include <linux/mfd/syscon.h>
  26
  27 #define DRIVER_NAME "mxs_phy"
  28
  29 #define HW_USBPHY_PWD                           0x00
  30 #define HW_USBPHY_CTRL                          0x30
  31 #define HW_USBPHY_CTRL_SET                      0x34
  32 #define HW_USBPHY_CTRL_CLR                      0x38
  33
  34 #define HW_USBPHY_DEBUG_SET                     0x54
  35 #define HW_USBPHY_DEBUG_CLR                     0x58
  36
  37 #define HW_USBPHY_IP                            0x90
  38 #define HW_USBPHY_IP_SET                        0x94
  39 #define HW_USBPHY_IP_CLR                        0x98
  40
  41 #define BM_USBPHY_CTRL_SFTRST                   BIT(31)
  42 #define BM_USBPHY_CTRL_CLKGATE                  BIT(30)
  43 #define BM_USBPHY_CTRL_OTG_ID_VALUE             BIT(27)
  44 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS        BIT(26)
  45 #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE     BIT(25)
  46 #define BM_USBPHY_CTRL_ENVBUSCHG_WKUP           BIT(23)
  47 #define BM_USBPHY_CTRL_ENIDCHG_WKUP             BIT(22)
  48 #define BM_USBPHY_CTRL_ENDPDMCHG_WKUP           BIT(21)
  49 #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD        BIT(20)
  50 #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE        BIT(19)
  51 #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL         BIT(18)
  52 #define BM_USBPHY_CTRL_ENUTMILEVEL3             BIT(15)
  53 #define BM_USBPHY_CTRL_ENUTMILEVEL2             BIT(14)
  54 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT       BIT(1)
  55
  56 #define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
  57
  58 #define BM_USBPHY_DEBUG_CLKGATE                 BIT(30)
  59
  60 /* Anatop Registers */
  61 #define ANADIG_ANA_MISC0                        0x150
  62 #define ANADIG_ANA_MISC0_SET                    0x154
  63 #define ANADIG_ANA_MISC0_CLR                    0x158
  64
  65 #define ANADIG_USB1_VBUS_DET_STAT               0x1c0
  66 #define ANADIG_USB2_VBUS_DET_STAT               0x220
  67
  68 #define ANADIG_USB1_LOOPBACK_SET                0x1e4
  69 #define ANADIG_USB1_LOOPBACK_CLR                0x1e8
  70 #define ANADIG_USB2_LOOPBACK_SET                0x244
  71 #define ANADIG_USB2_LOOPBACK_CLR                0x248
  72
  73 #define ANADIG_USB1_MISC                        0x1f0
  74 #define ANADIG_USB2_MISC                        0x250
  75
  76 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG    BIT(12)
  77 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
  78
  79 #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
  80 #define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3)
  81
  82 #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1   BIT(2)
  83 #define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN      BIT(5)
  84 #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1   BIT(2)
  85 #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN      BIT(5)
  86
  87 #define BM_ANADIG_USB1_MISC_RX_VPIN_FS          BIT(29)
  88 #define BM_ANADIG_USB1_MISC_RX_VMIN_FS          BIT(28)
  89 #define BM_ANADIG_USB2_MISC_RX_VPIN_FS          BIT(29)
  90 #define BM_ANADIG_USB2_MISC_RX_VMIN_FS          BIT(28)
  91
  92 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
  93
  94 /* Do disconnection between PHY and controller without vbus */
  95 #define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS    BIT(0)
  96
  97 /*
  98  * The PHY will be in messy if there is a wakeup after putting
  99  * bus to suspend (set portsc.suspendM) but before setting PHY to low
 100  * power mode (set portsc.phcd).
 101  */
 102 #define MXS_PHY_ABNORMAL_IN_SUSPEND             BIT(1)
 103
 104 /*
 105  * The SOF sends too fast after resuming, it will cause disconnection
 106  * between host and high speed device.
 107  */
 108 #define MXS_PHY_SENDING_SOF_TOO_FAST            BIT(2)
 109
 110 /*
 111  * IC has bug fixes logic, they include
 112  * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
 113  * which are described at above flags, the RTL will handle it
 114  * according to different versions.
 115  */
 116 #define MXS_PHY_NEED_IP_FIX                     BIT(3)
 117
 118 struct mxs_phy_data {
 119         unsigned int flags;
 120 };
 121
 122 static const struct mxs_phy_data imx23_phy_data = {
 123         .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
 124 };
 125
 126 static const struct mxs_phy_data imx6q_phy_data = {
 127         .flags = MXS_PHY_SENDING_SOF_TOO_FAST |
 128                 MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 129                 MXS_PHY_NEED_IP_FIX,
 130 };
 131
 132 static const struct mxs_phy_data imx6sl_phy_data = {
 133         .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 134                 MXS_PHY_NEED_IP_FIX,
 135 };
 136
 137 static const struct mxs_phy_data vf610_phy_data = {
 138         .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 139                 MXS_PHY_NEED_IP_FIX,
 140 };
 141
 142 static const struct mxs_phy_data imx6sx_phy_data = {
 143         .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
 144 };
 145
 146 static const struct of_device_id mxs_phy_dt_ids[] = {
 147         { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
 148         { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
 149         { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
 150         { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
 151         { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
 152         { /* sentinel */ }
 153 };
 154 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
 155
 156 struct mxs_phy {
 157         struct usb_phy phy;
 158         struct clk *clk;
 159         const struct mxs_phy_data *data;
 160         struct regmap *regmap_anatop;
 161         int port_id;
 162 };
 163
 164 static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
 165 {
 166         return mxs_phy->data == &imx6q_phy_data;
 167 }
 168
 169 static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
 170 {
 171         return mxs_phy->data == &imx6sl_phy_data;
 172 }
 173
 174 /*
 175  * PHY needs some 32K cycles to switch from 32K clock to
 176  * bus (such as AHB/AXI, etc) clock.
 177  */
 178 static void mxs_phy_clock_switch_delay(void)
 179 {
 180         usleep_range(300, 400);
 181 }
 182
 183 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 184 {
 185         int ret;
 186         void __iomem *base = mxs_phy->phy.io_priv;
 187
 188         ret = stmp_reset_block(base + HW_USBPHY_CTRL);
 189         if (ret)
 190                 return ret;
 191
 192         /* Power up the PHY */
 193         writel(0, base + HW_USBPHY_PWD);
 194
 195         /*
 196          * USB PHY Ctrl Setting
 197          * - Auto clock/power on
 198          * - Enable full/low speed support
 199          */
 200         writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
 201                 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
 202                 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
 203                 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
 204                 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
 205                 BM_USBPHY_CTRL_ENUTMILEVEL2 |
 206                 BM_USBPHY_CTRL_ENUTMILEVEL3,
 207                base + HW_USBPHY_CTRL_SET);
 208
 209         if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
 210                 writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
 211
 212         return 0;
 213 }
 214
 215 /* Return true if the vbus is there */
 216 static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
 217 {
 218         unsigned int vbus_value;
 219
 220         if (mxs_phy->port_id == 0)
 221                 regmap_read(mxs_phy->regmap_anatop,
 222                         ANADIG_USB1_VBUS_DET_STAT,
 223                         &vbus_value);
 224         else if (mxs_phy->port_id == 1)
 225                 regmap_read(mxs_phy->regmap_anatop,
 226                         ANADIG_USB2_VBUS_DET_STAT,
 227                         &vbus_value);
 228
 229         if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
 230                 return true;
 231         else
 232                 return false;
 233 }
 234
 235 static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
 236 {
 237         void __iomem *base = mxs_phy->phy.io_priv;
 238         u32 reg;
 239
 240         if (disconnect)
 241                 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
 242                         base + HW_USBPHY_DEBUG_CLR);
 243
 244         if (mxs_phy->port_id == 0) {
 245                 reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
 246                         : ANADIG_USB1_LOOPBACK_CLR;
 247                 regmap_write(mxs_phy->regmap_anatop, reg,
 248                         BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
 249                         BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
 250         } else if (mxs_phy->port_id == 1) {
 251                 reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
 252                         : ANADIG_USB2_LOOPBACK_CLR;
 253                 regmap_write(mxs_phy->regmap_anatop, reg,
 254                         BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
 255                         BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
 256         }
 257
 258         if (!disconnect)
 259                 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
 260                         base + HW_USBPHY_DEBUG_SET);
 261
 262         /* Delay some time, and let Linestate be SE0 for controller */
 263         if (disconnect)
 264                 usleep_range(500, 1000);
 265 }
 266
 267 static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
 268 {
 269         void __iomem *base = mxs_phy->phy.io_priv;
 270         u32 phyctrl = readl(base + HW_USBPHY_CTRL);
 271
 272         if (IS_ENABLED(CONFIG_USB_OTG) &&
 273                         !(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
 274                 return true;
 275
 276         return false;
 277 }
 278
 279 static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 280 {
 281         bool vbus_is_on = false;
 282
 283         /* If the SoCs don't need to disconnect line without vbus, quit */
 284         if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
 285                 return;
 286
 287         /* If the SoCs don't have anatop, quit */
 288         if (!mxs_phy->regmap_anatop)
 289                 return;
 290
 291         vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 292
 293         if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
 294                 __mxs_phy_disconnect_line(mxs_phy, true);
 295         else
 296                 __mxs_phy_disconnect_line(mxs_phy, false);
 297
 298 }
 299
 300 static int mxs_phy_init(struct usb_phy *phy)
 301 {
 302         int ret;
 303         struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 304
 305         mxs_phy_clock_switch_delay();
 306         ret = clk_prepare_enable(mxs_phy->clk);
 307         if (ret)
 308                 return ret;
 309
 310         return mxs_phy_hw_init(mxs_phy);
 311 }
 312
 313 static void mxs_phy_shutdown(struct usb_phy *phy)
 314 {
 315         struct mxs_phy *mxs_phy = to_mxs_phy(phy);
 316         u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
 317                         BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
 318                         BM_USBPHY_CTRL_ENIDCHG_WKUP |
 319                         BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
 320                         BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
 321                         BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
 322                         BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
 323                         BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
 324
 325         writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
 326         writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
 327
 328         writel(BM_USBPHY_CTRL_CLKGATE,
 329                phy->io_priv + HW_USBPHY_CTRL_SET);
 330
 331         clk_disable_unprepare(mxs_phy->clk);
 332 }
 333
 334 static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
 335 {
 336         unsigned int line_state;
 337         /* bit definition is the same for all controllers */
 338         unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
 339                      dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
 340         unsigned int reg = ANADIG_USB1_MISC;
 341
 342         /* If the SoCs don't have anatop, quit */
 343         if (!mxs_phy->regmap_anatop)
 344                 return false;
 345
 346         if (mxs_phy->port_id == 0)
 347                 reg = ANADIG_USB1_MISC;
 348         else if (mxs_phy->port_id == 1)
 349                 reg = ANADIG_USB2_MISC;
 350
 351         regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
 352
 353         if ((line_state & (dp_bit | dm_bit)) ==  dm_bit)
 354                 return true;
 355         else
 356                 return false;
 357 }
 358
 359 static int mxs_phy_suspend(struct usb_phy *x, int suspend)
 360 {
 361         int ret;
 362         struct mxs_phy *mxs_phy = to_mxs_phy(x);
 363         bool low_speed_connection, vbus_is_on;
 364
 365         low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
 366         vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 367
 368         if (suspend) {
 369                 /*
 370                  * FIXME: Do not power down RXPWD1PT1 bit for low speed
 371                  * connect. The low speed connection will have problem at
 372                  * very rare cases during usb suspend and resume process.
 373                  */
 374                 if (low_speed_connection & vbus_is_on) {
 375                         /*
 376                          * If value to be set as pwd value is not 0xffffffff,
 377                          * several 32Khz cycles are needed.
 378                          */
 379                         mxs_phy_clock_switch_delay();
 380                         writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
 381                 } else {
 382                         writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
 383                 }
 384                 writel(BM_USBPHY_CTRL_CLKGATE,
 385                        x->io_priv + HW_USBPHY_CTRL_SET);
 386                 clk_disable_unprepare(mxs_phy->clk);
 387         } else {
 388                 mxs_phy_clock_switch_delay();
 389                 ret = clk_prepare_enable(mxs_phy->clk);
 390                 if (ret)
 391                         return ret;
 392                 writel(BM_USBPHY_CTRL_CLKGATE,
 393                        x->io_priv + HW_USBPHY_CTRL_CLR);
 394                 writel(0, x->io_priv + HW_USBPHY_PWD);
 395         }
 396
 397         return 0;
 398 }
 399
 400 static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
 401 {
 402         struct mxs_phy *mxs_phy = to_mxs_phy(x);
 403         u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
 404                         BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
 405                                 BM_USBPHY_CTRL_ENIDCHG_WKUP;
 406         if (enabled) {
 407                 mxs_phy_disconnect_line(mxs_phy, true);
 408                 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
 409         } else {
 410                 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
 411                 mxs_phy_disconnect_line(mxs_phy, false);
 412         }
 413
 414         return 0;
 415 }
 416
 417 static int mxs_phy_on_connect(struct usb_phy *phy,
 418                 enum usb_device_speed speed)
 419 {
 420         dev_dbg(phy->dev, "%s device has connected\n",
 421                 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 422
 423         if (speed == USB_SPEED_HIGH)
 424                 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
 425                        phy->io_priv + HW_USBPHY_CTRL_SET);
 426
 427         return 0;
 428 }
 429
 430 static int mxs_phy_on_disconnect(struct usb_phy *phy,
 431                 enum usb_device_speed speed)
 432 {
 433         dev_dbg(phy->dev, "%s device has disconnected\n",
 434                 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
 435
 436         /* Sometimes, the speed is not high speed when the error occurs */
 437         if (readl(phy->io_priv + HW_USBPHY_CTRL) &
 438                         BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
 439                 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
 440                        phy->io_priv + HW_USBPHY_CTRL_CLR);
 441
 442         return 0;
 443 }
 444
 445 static int mxs_phy_probe(struct platform_device *pdev)
 446 {
 447         struct resource *res;
 448         void __iomem *base;
 449         struct clk *clk;
 450         struct mxs_phy *mxs_phy;
 451         int ret;
 452         const struct of_device_id *of_id =
 453                         of_match_device(mxs_phy_dt_ids, &pdev->dev);
 454         struct device_node *np = pdev->dev.of_node;
 455
 456         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 457         base = devm_ioremap_resource(&pdev->dev, res);
 458         if (IS_ERR(base))
 459                 return PTR_ERR(base);
 460
 461         clk = devm_clk_get(&pdev->dev, NULL);
 462         if (IS_ERR(clk)) {
 463                 dev_err(&pdev->dev,
 464                         "can't get the clock, err=%ld", PTR_ERR(clk));
 465                 return PTR_ERR(clk);
 466         }
 467
 468         mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
 469         if (!mxs_phy)
 470                 return -ENOMEM;
 471
 472         /* Some SoCs don't have anatop registers */
 473         if (of_get_property(np, "fsl,anatop", NULL)) {
 474                 mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
 475                         (np, "fsl,anatop");
 476                 if (IS_ERR(mxs_phy->regmap_anatop)) {
 477                         dev_dbg(&pdev->dev,
 478                                 "failed to find regmap for anatop\n");
 479                         return PTR_ERR(mxs_phy->regmap_anatop);
 480                 }
 481         }
 482
 483         ret = of_alias_get_id(np, "usbphy");
 484         if (ret < 0)
 485                 dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
 486         mxs_phy->port_id = ret;
 487
 488         mxs_phy->phy.io_priv            = base;
 489         mxs_phy->phy.dev                = &pdev->dev;
 490         mxs_phy->phy.label              = DRIVER_NAME;
 491         mxs_phy->phy.init               = mxs_phy_init;
 492         mxs_phy->phy.shutdown           = mxs_phy_shutdown;
 493         mxs_phy->phy.set_suspend        = mxs_phy_suspend;
 494         mxs_phy->phy.notify_connect     = mxs_phy_on_connect;
 495         mxs_phy->phy.notify_disconnect  = mxs_phy_on_disconnect;
 496         mxs_phy->phy.type               = USB_PHY_TYPE_USB2;
 497         mxs_phy->phy.set_wakeup         = mxs_phy_set_wakeup;
 498
 499         mxs_phy->clk = clk;
 500         mxs_phy->data = of_id->data;
 501
 502         platform_set_drvdata(pdev, mxs_phy);
 503
 504         device_set_wakeup_capable(&pdev->dev, true);
 505
 506         ret = usb_add_phy_dev(&mxs_phy->phy);
 507         if (ret)
 508                 return ret;
 509
 510         return 0;
 511 }
 512
 513 static int mxs_phy_remove(struct platform_device *pdev)
 514 {
 515         struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
 516
 517         usb_remove_phy(&mxs_phy->phy);
 518
 519         return 0;
 520 }
 521
 522 #ifdef CONFIG_PM_SLEEP
 523 static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
 524 {
 525         unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
 526
 527         /* If the SoCs don't have anatop, quit */
 528         if (!mxs_phy->regmap_anatop)
 529                 return;
 530
 531         if (is_imx6q_phy(mxs_phy))
 532                 regmap_write(mxs_phy->regmap_anatop, reg,
 533                         BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
 534         else if (is_imx6sl_phy(mxs_phy))
 535                 regmap_write(mxs_phy->regmap_anatop,
 536                         reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
 537 }
 538
 539 static int mxs_phy_system_suspend(struct device *dev)
 540 {
 541         struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
 542
 543         if (device_may_wakeup(dev))
 544                 mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
 545
 546         return 0;
 547 }
 548
 549 static int mxs_phy_system_resume(struct device *dev)
 550 {
 551         struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
 552
 553         if (device_may_wakeup(dev))
 554                 mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
 555
 556         return 0;
 557 }
 558 #endif /* CONFIG_PM_SLEEP */
 559
 560 static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
 561                 mxs_phy_system_resume);
 562
 563 static struct platform_driver mxs_phy_driver = {
 564         .probe = mxs_phy_probe,
 565         .remove = mxs_phy_remove,
 566         .driver = {
 567                 .name = DRIVER_NAME,
 568                 .of_match_table = mxs_phy_dt_ids,
 569                 .pm = &mxs_phy_pm,
 570          },
 571 };
 572
 573 static int __init mxs_phy_module_init(void)
 574 {
 575         return platform_driver_register(&mxs_phy_driver);
 576 }
 577 postcore_initcall(mxs_phy_module_init);
 578
 579 static void __exit mxs_phy_module_exit(void)
 580 {
 581         platform_driver_unregister(&mxs_phy_driver);
 582 }
 583 module_exit(mxs_phy_module_exit);
 584
 585 MODULE_ALIAS("platform:mxs-usb-phy");
 586 MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
 587 MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
 588 MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
 589 MODULE_LICENSE("GPL");