Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / usb / isp1760 / isp1760-core.h
1 /*
2  * Driver for the NXP ISP1760 chip
3  *
4  * Copyright 2014 Laurent Pinchart
5  * Copyright 2007 Sebastian Siewior
6  *
7  * Contacts:
8  *      Sebastian Siewior <bigeasy@linutronix.de>
9  *      Laurent Pinchart <laurent.pinchart@ideasonboard.com>
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License
13  * version 2 as published by the Free Software Foundation.
14  */
15
16 #ifndef _ISP1760_CORE_H_
17 #define _ISP1760_CORE_H_
18
19 #include <linux/ioport.h>
20
21 #include "isp1760-hcd.h"
22 #include "isp1760-udc.h"
23
24 struct device;
25 struct gpio_desc;
26
27 /*
28  * Device flags that can vary from board to board.  All of these
29  * indicate the most "atypical" case, so that a devflags of 0 is
30  * a sane default configuration.
31  */
32 #define ISP1760_FLAG_BUS_WIDTH_16       0x00000002 /* 16-bit data bus width */
33 #define ISP1760_FLAG_OTG_EN             0x00000004 /* Port 1 supports OTG */
34 #define ISP1760_FLAG_ANALOG_OC          0x00000008 /* Analog overcurrent */
35 #define ISP1760_FLAG_DACK_POL_HIGH      0x00000010 /* DACK active high */
36 #define ISP1760_FLAG_DREQ_POL_HIGH      0x00000020 /* DREQ active high */
37 #define ISP1760_FLAG_ISP1761            0x00000040 /* Chip is ISP1761 */
38 #define ISP1760_FLAG_INTR_POL_HIGH      0x00000080 /* Interrupt polarity active high */
39 #define ISP1760_FLAG_INTR_EDGE_TRIG     0x00000100 /* Interrupt edge triggered */
40
41 struct isp1760_device {
42         struct device *dev;
43
44         void __iomem *regs;
45         unsigned int devflags;
46         struct gpio_desc *rst_gpio;
47
48         struct isp1760_hcd hcd;
49         struct isp1760_udc udc;
50 };
51
52 int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
53                      struct device *dev, unsigned int devflags);
54 void isp1760_unregister(struct device *dev);
55
56 void isp1760_set_pullup(struct isp1760_device *isp, bool enable);
57
58 static inline u32 isp1760_read32(void __iomem *base, u32 reg)
59 {
60         return readl(base + reg);
61 }
62
63 static inline void isp1760_write32(void __iomem *base, u32 reg, u32 val)
64 {
65         writel(val, base + reg);
66 }
67
68 #endif