Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / usb / host / ehci-ppc-of.c
1 /*
2  * EHCI HCD (Host Controller Driver) for USB.
3  *
4  * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus
5  * Tested on AMCC PPC 440EPx
6  *
7  * Valentine Barshak <vbarshak@ru.mvista.com>
8  *
9  * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
10  * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
11  *
12  * This file is licenced under the GPL.
13  */
14
15 #include <linux/err.h>
16 #include <linux/signal.h>
17
18 #include <linux/of.h>
19 #include <linux/of_address.h>
20 #include <linux/of_irq.h>
21 #include <linux/of_platform.h>
22
23
24 static const struct hc_driver ehci_ppc_of_hc_driver = {
25         .description            = hcd_name,
26         .product_desc           = "OF EHCI",
27         .hcd_priv_size          = sizeof(struct ehci_hcd),
28
29         /*
30          * generic hardware linkage
31          */
32         .irq                    = ehci_irq,
33         .flags                  = HCD_MEMORY | HCD_USB2 | HCD_BH,
34
35         /*
36          * basic lifecycle operations
37          */
38         .reset                  = ehci_setup,
39         .start                  = ehci_run,
40         .stop                   = ehci_stop,
41         .shutdown               = ehci_shutdown,
42
43         /*
44          * managing i/o requests and associated device resources
45          */
46         .urb_enqueue            = ehci_urb_enqueue,
47         .urb_dequeue            = ehci_urb_dequeue,
48         .endpoint_disable       = ehci_endpoint_disable,
49         .endpoint_reset         = ehci_endpoint_reset,
50
51         /*
52          * scheduling support
53          */
54         .get_frame_number       = ehci_get_frame,
55
56         /*
57          * root hub support
58          */
59         .hub_status_data        = ehci_hub_status_data,
60         .hub_control            = ehci_hub_control,
61 #ifdef  CONFIG_PM
62         .bus_suspend            = ehci_bus_suspend,
63         .bus_resume             = ehci_bus_resume,
64 #endif
65         .relinquish_port        = ehci_relinquish_port,
66         .port_handed_over       = ehci_port_handed_over,
67
68         .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
69 };
70
71
72 /*
73  * 440EPx Errata USBH_3
74  * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
75  */
76 #define PPC440EPX_EHCI0_INSREG_BMT      (0x1 << 0)
77 static int
78 ppc44x_enable_bmt(struct device_node *dn)
79 {
80         __iomem u32 *insreg_virt;
81
82         insreg_virt = of_iomap(dn, 1);
83         if (!insreg_virt)
84                 return  -EINVAL;
85
86         out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT);
87
88         iounmap(insreg_virt);
89         return 0;
90 }
91
92
93 static int ehci_hcd_ppc_of_probe(struct platform_device *op)
94 {
95         struct device_node *dn = op->dev.of_node;
96         struct usb_hcd *hcd;
97         struct ehci_hcd *ehci = NULL;
98         struct resource res;
99         int irq;
100         int rv;
101
102         struct device_node *np;
103
104         if (usb_disabled())
105                 return -ENODEV;
106
107         dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
108
109         rv = of_address_to_resource(dn, 0, &res);
110         if (rv)
111                 return rv;
112
113         hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
114         if (!hcd)
115                 return -ENOMEM;
116
117         hcd->rsrc_start = res.start;
118         hcd->rsrc_len = resource_size(&res);
119
120         irq = irq_of_parse_and_map(dn, 0);
121         if (irq == NO_IRQ) {
122                 dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
123                         __FILE__);
124                 rv = -EBUSY;
125                 goto err_irq;
126         }
127
128         hcd->regs = devm_ioremap_resource(&op->dev, &res);
129         if (IS_ERR(hcd->regs)) {
130                 rv = PTR_ERR(hcd->regs);
131                 goto err_ioremap;
132         }
133
134         ehci = hcd_to_ehci(hcd);
135         np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
136         if (np != NULL) {
137                 /* claim we really affected by usb23 erratum */
138                 if (!of_address_to_resource(np, 0, &res))
139                         ehci->ohci_hcctrl_reg =
140                                 devm_ioremap(&op->dev,
141                                              res.start + OHCI_HCCTRL_OFFSET,
142                                              OHCI_HCCTRL_LEN);
143                 else
144                         pr_debug("%s: no ohci offset in fdt\n", __FILE__);
145                 if (!ehci->ohci_hcctrl_reg) {
146                         pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__);
147                 } else {
148                         ehci->has_amcc_usb23 = 1;
149                 }
150         }
151
152         if (of_get_property(dn, "big-endian", NULL)) {
153                 ehci->big_endian_mmio = 1;
154                 ehci->big_endian_desc = 1;
155         }
156         if (of_get_property(dn, "big-endian-regs", NULL))
157                 ehci->big_endian_mmio = 1;
158         if (of_get_property(dn, "big-endian-desc", NULL))
159                 ehci->big_endian_desc = 1;
160
161         ehci->caps = hcd->regs;
162
163         if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) {
164                 rv = ppc44x_enable_bmt(dn);
165                 ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n",
166                                 rv ? "NOT ": "");
167         }
168
169         rv = usb_add_hcd(hcd, irq, 0);
170         if (rv)
171                 goto err_ioremap;
172
173         device_wakeup_enable(hcd->self.controller);
174         return 0;
175
176 err_ioremap:
177         irq_dispose_mapping(irq);
178 err_irq:
179         usb_put_hcd(hcd);
180
181         return rv;
182 }
183
184
185 static int ehci_hcd_ppc_of_remove(struct platform_device *op)
186 {
187         struct usb_hcd *hcd = platform_get_drvdata(op);
188         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
189
190         struct device_node *np;
191         struct resource res;
192
193         dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
194
195         usb_remove_hcd(hcd);
196
197         irq_dispose_mapping(hcd->irq);
198
199         /* use request_mem_region to test if the ohci driver is loaded.  if so
200          * ensure the ohci core is operational.
201          */
202         if (ehci->has_amcc_usb23) {
203                 np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
204                 if (np != NULL) {
205                         if (!of_address_to_resource(np, 0, &res))
206                                 if (!request_mem_region(res.start,
207                                                             0x4, hcd_name))
208                                         set_ohci_hcfs(ehci, 1);
209                                 else
210                                         release_mem_region(res.start, 0x4);
211                         else
212                                 pr_debug("%s: no ohci offset in fdt\n", __FILE__);
213                         of_node_put(np);
214                 }
215         }
216         usb_put_hcd(hcd);
217
218         return 0;
219 }
220
221
222 static const struct of_device_id ehci_hcd_ppc_of_match[] = {
223         {
224                 .compatible = "usb-ehci",
225         },
226         {},
227 };
228 MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match);
229
230
231 static struct platform_driver ehci_hcd_ppc_of_driver = {
232         .probe          = ehci_hcd_ppc_of_probe,
233         .remove         = ehci_hcd_ppc_of_remove,
234         .shutdown       = usb_hcd_platform_shutdown,
235         .driver = {
236                 .name = "ppc-of-ehci",
237                 .of_match_table = ehci_hcd_ppc_of_match,
238         },
239 };