Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / usb / gadget / udc / s3c2410_udc.h
1 /*
2  * linux/drivers/usb/gadget/s3c2410_udc.h
3  * Samsung on-chip full speed USB device controllers
4  *
5  * Copyright (C) 2004-2007 Herbert Pƶtzl - Arnaud Patard
6  *      Additional cleanups by Ben Dooks <ben-linux@fluff.org>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13
14 #ifndef _S3C2410_UDC_H
15 #define _S3C2410_UDC_H
16
17 struct s3c2410_ep {
18         struct list_head                queue;
19         unsigned long                   last_io;        /* jiffies timestamp */
20         struct usb_gadget               *gadget;
21         struct s3c2410_udc              *dev;
22         struct usb_ep                   ep;
23         u8                              num;
24
25         unsigned short                  fifo_size;
26         u8                              bEndpointAddress;
27         u8                              bmAttributes;
28
29         unsigned                        halted : 1;
30         unsigned                        already_seen : 1;
31         unsigned                        setup_stage : 1;
32 };
33
34
35 /* Warning : ep0 has a fifo of 16 bytes */
36 /* Don't try to set 32 or 64            */
37 /* also testusb 14 fails  wit 16 but is */
38 /* fine with 8                          */
39 #define EP0_FIFO_SIZE            8
40 #define EP_FIFO_SIZE            64
41 #define DEFAULT_POWER_STATE     0x00
42
43 #define S3C2440_EP_FIFO_SIZE    128
44
45 static const char ep0name [] = "ep0";
46
47 static const char *const ep_name[] = {
48         ep0name,                                /* everyone has ep0 */
49         /* s3c2410 four bidirectional bulk endpoints */
50         "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk",
51 };
52
53 #define S3C2410_ENDPOINTS       ARRAY_SIZE(ep_name)
54
55 struct s3c2410_request {
56         struct list_head                queue;          /* ep's requests */
57         struct usb_request              req;
58 };
59
60 enum ep0_state {
61         EP0_IDLE,
62         EP0_IN_DATA_PHASE,
63         EP0_OUT_DATA_PHASE,
64         EP0_END_XFER,
65         EP0_STALL,
66 };
67
68 static const char *ep0states[]= {
69         "EP0_IDLE",
70         "EP0_IN_DATA_PHASE",
71         "EP0_OUT_DATA_PHASE",
72         "EP0_END_XFER",
73         "EP0_STALL",
74 };
75
76 struct s3c2410_udc {
77         spinlock_t                      lock;
78
79         struct s3c2410_ep               ep[S3C2410_ENDPOINTS];
80         int                             address;
81         struct usb_gadget               gadget;
82         struct usb_gadget_driver        *driver;
83         struct s3c2410_request          fifo_req;
84         u8                              fifo_buf[EP_FIFO_SIZE];
85         u16                             devstatus;
86
87         u32                             port_status;
88         int                             ep0state;
89
90         unsigned                        got_irq : 1;
91
92         unsigned                        req_std : 1;
93         unsigned                        req_config : 1;
94         unsigned                        req_pending : 1;
95         u8                              vbus;
96         struct dentry                   *regs_info;
97 };
98 #define to_s3c2410(g)   (container_of((g), struct s3c2410_udc, gadget))
99
100 #endif