Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / usb / gadget / function / f_serial.c
1 /*
2  * f_serial.c - generic USB serial function driver
3  *
4  * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
5  * Copyright (C) 2008 by David Brownell
6  * Copyright (C) 2008 by Nokia Corporation
7  *
8  * This software is distributed under the terms of the GNU General
9  * Public License ("GPL") as published by the Free Software Foundation,
10  * either version 2 of that License or (at your option) any later version.
11  */
12
13 #include <linux/slab.h>
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/device.h>
17
18 #include "u_serial.h"
19 #include "gadget_chips.h"
20
21
22 /*
23  * This function packages a simple "generic serial" port with no real
24  * control mechanisms, just raw data transfer over two bulk endpoints.
25  *
26  * Because it's not standardized, this isn't as interoperable as the
27  * CDC ACM driver.  However, for many purposes it's just as functional
28  * if you can arrange appropriate host side drivers.
29  */
30
31 struct f_gser {
32         struct gserial                  port;
33         u8                              data_id;
34         u8                              port_num;
35 };
36
37 static inline struct f_gser *func_to_gser(struct usb_function *f)
38 {
39         return container_of(f, struct f_gser, port.func);
40 }
41
42 /*-------------------------------------------------------------------------*/
43
44 /* interface descriptor: */
45
46 static struct usb_interface_descriptor gser_interface_desc = {
47         .bLength =              USB_DT_INTERFACE_SIZE,
48         .bDescriptorType =      USB_DT_INTERFACE,
49         /* .bInterfaceNumber = DYNAMIC */
50         .bNumEndpoints =        2,
51         .bInterfaceClass =      USB_CLASS_VENDOR_SPEC,
52         .bInterfaceSubClass =   0,
53         .bInterfaceProtocol =   0,
54         /* .iInterface = DYNAMIC */
55 };
56
57 /* full speed support: */
58
59 static struct usb_endpoint_descriptor gser_fs_in_desc = {
60         .bLength =              USB_DT_ENDPOINT_SIZE,
61         .bDescriptorType =      USB_DT_ENDPOINT,
62         .bEndpointAddress =     USB_DIR_IN,
63         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
64 };
65
66 static struct usb_endpoint_descriptor gser_fs_out_desc = {
67         .bLength =              USB_DT_ENDPOINT_SIZE,
68         .bDescriptorType =      USB_DT_ENDPOINT,
69         .bEndpointAddress =     USB_DIR_OUT,
70         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
71 };
72
73 static struct usb_descriptor_header *gser_fs_function[] = {
74         (struct usb_descriptor_header *) &gser_interface_desc,
75         (struct usb_descriptor_header *) &gser_fs_in_desc,
76         (struct usb_descriptor_header *) &gser_fs_out_desc,
77         NULL,
78 };
79
80 /* high speed support: */
81
82 static struct usb_endpoint_descriptor gser_hs_in_desc = {
83         .bLength =              USB_DT_ENDPOINT_SIZE,
84         .bDescriptorType =      USB_DT_ENDPOINT,
85         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
86         .wMaxPacketSize =       cpu_to_le16(512),
87 };
88
89 static struct usb_endpoint_descriptor gser_hs_out_desc = {
90         .bLength =              USB_DT_ENDPOINT_SIZE,
91         .bDescriptorType =      USB_DT_ENDPOINT,
92         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
93         .wMaxPacketSize =       cpu_to_le16(512),
94 };
95
96 static struct usb_descriptor_header *gser_hs_function[] = {
97         (struct usb_descriptor_header *) &gser_interface_desc,
98         (struct usb_descriptor_header *) &gser_hs_in_desc,
99         (struct usb_descriptor_header *) &gser_hs_out_desc,
100         NULL,
101 };
102
103 static struct usb_endpoint_descriptor gser_ss_in_desc = {
104         .bLength =              USB_DT_ENDPOINT_SIZE,
105         .bDescriptorType =      USB_DT_ENDPOINT,
106         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
107         .wMaxPacketSize =       cpu_to_le16(1024),
108 };
109
110 static struct usb_endpoint_descriptor gser_ss_out_desc = {
111         .bLength =              USB_DT_ENDPOINT_SIZE,
112         .bDescriptorType =      USB_DT_ENDPOINT,
113         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
114         .wMaxPacketSize =       cpu_to_le16(1024),
115 };
116
117 static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = {
118         .bLength =              sizeof gser_ss_bulk_comp_desc,
119         .bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
120 };
121
122 static struct usb_descriptor_header *gser_ss_function[] = {
123         (struct usb_descriptor_header *) &gser_interface_desc,
124         (struct usb_descriptor_header *) &gser_ss_in_desc,
125         (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
126         (struct usb_descriptor_header *) &gser_ss_out_desc,
127         (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
128         NULL,
129 };
130
131 /* string descriptors: */
132
133 static struct usb_string gser_string_defs[] = {
134         [0].s = "Generic Serial",
135         {  } /* end of list */
136 };
137
138 static struct usb_gadget_strings gser_string_table = {
139         .language =             0x0409, /* en-us */
140         .strings =              gser_string_defs,
141 };
142
143 static struct usb_gadget_strings *gser_strings[] = {
144         &gser_string_table,
145         NULL,
146 };
147
148 /*-------------------------------------------------------------------------*/
149
150 static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
151 {
152         struct f_gser           *gser = func_to_gser(f);
153         struct usb_composite_dev *cdev = f->config->cdev;
154
155         /* we know alt == 0, so this is an activation or a reset */
156
157         if (gser->port.in->driver_data) {
158                 dev_dbg(&cdev->gadget->dev,
159                         "reset generic ttyGS%d\n", gser->port_num);
160                 gserial_disconnect(&gser->port);
161         }
162         if (!gser->port.in->desc || !gser->port.out->desc) {
163                 dev_dbg(&cdev->gadget->dev,
164                         "activate generic ttyGS%d\n", gser->port_num);
165                 if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
166                     config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
167                         gser->port.in->desc = NULL;
168                         gser->port.out->desc = NULL;
169                         return -EINVAL;
170                 }
171         }
172         gserial_connect(&gser->port, gser->port_num);
173         return 0;
174 }
175
176 static void gser_disable(struct usb_function *f)
177 {
178         struct f_gser   *gser = func_to_gser(f);
179         struct usb_composite_dev *cdev = f->config->cdev;
180
181         dev_dbg(&cdev->gadget->dev,
182                 "generic ttyGS%d deactivated\n", gser->port_num);
183         gserial_disconnect(&gser->port);
184 }
185
186 /*-------------------------------------------------------------------------*/
187
188 /* serial function driver setup/binding */
189
190 static int gser_bind(struct usb_configuration *c, struct usb_function *f)
191 {
192         struct usb_composite_dev *cdev = c->cdev;
193         struct f_gser           *gser = func_to_gser(f);
194         int                     status;
195         struct usb_ep           *ep;
196
197         /* REVISIT might want instance-specific strings to help
198          * distinguish instances ...
199          */
200
201         /* maybe allocate device-global string ID */
202         if (gser_string_defs[0].id == 0) {
203                 status = usb_string_id(c->cdev);
204                 if (status < 0)
205                         return status;
206                 gser_string_defs[0].id = status;
207         }
208
209         /* allocate instance-specific interface IDs */
210         status = usb_interface_id(c, f);
211         if (status < 0)
212                 goto fail;
213         gser->data_id = status;
214         gser_interface_desc.bInterfaceNumber = status;
215
216         status = -ENODEV;
217
218         /* allocate instance-specific endpoints */
219         ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_in_desc);
220         if (!ep)
221                 goto fail;
222         gser->port.in = ep;
223         ep->driver_data = cdev; /* claim */
224
225         ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_out_desc);
226         if (!ep)
227                 goto fail;
228         gser->port.out = ep;
229         ep->driver_data = cdev; /* claim */
230
231         /* support all relevant hardware speeds... we expect that when
232          * hardware is dual speed, all bulk-capable endpoints work at
233          * both speeds
234          */
235         gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
236         gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
237
238         gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
239         gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
240
241         status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
242                         gser_ss_function);
243         if (status)
244                 goto fail;
245         dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
246                 gser->port_num,
247                 gadget_is_superspeed(c->cdev->gadget) ? "super" :
248                 gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
249                 gser->port.in->name, gser->port.out->name);
250         return 0;
251
252 fail:
253         /* we might as well release our claims on endpoints */
254         if (gser->port.out)
255                 gser->port.out->driver_data = NULL;
256         if (gser->port.in)
257                 gser->port.in->driver_data = NULL;
258
259         ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
260
261         return status;
262 }
263
264 static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
265 {
266         return container_of(to_config_group(item), struct f_serial_opts,
267                             func_inst.group);
268 }
269
270 CONFIGFS_ATTR_STRUCT(f_serial_opts);
271 static ssize_t f_serial_attr_show(struct config_item *item,
272                                   struct configfs_attribute *attr,
273                                   char *page)
274 {
275         struct f_serial_opts *opts = to_f_serial_opts(item);
276         struct f_serial_opts_attribute *f_serial_opts_attr =
277                 container_of(attr, struct f_serial_opts_attribute, attr);
278         ssize_t ret = 0;
279
280         if (f_serial_opts_attr->show)
281                 ret = f_serial_opts_attr->show(opts, page);
282
283         return ret;
284 }
285
286 static void serial_attr_release(struct config_item *item)
287 {
288         struct f_serial_opts *opts = to_f_serial_opts(item);
289
290         usb_put_function_instance(&opts->func_inst);
291 }
292
293 static struct configfs_item_operations serial_item_ops = {
294         .release        = serial_attr_release,
295         .show_attribute = f_serial_attr_show,
296 };
297
298 static ssize_t f_serial_port_num_show(struct f_serial_opts *opts, char *page)
299 {
300         return sprintf(page, "%u\n", opts->port_num);
301 }
302
303 static struct f_serial_opts_attribute f_serial_port_num =
304         __CONFIGFS_ATTR_RO(port_num, f_serial_port_num_show);
305
306 static struct configfs_attribute *acm_attrs[] = {
307         &f_serial_port_num.attr,
308         NULL,
309 };
310
311 static struct config_item_type serial_func_type = {
312         .ct_item_ops    = &serial_item_ops,
313         .ct_attrs       = acm_attrs,
314         .ct_owner       = THIS_MODULE,
315 };
316
317 static void gser_free_inst(struct usb_function_instance *f)
318 {
319         struct f_serial_opts *opts;
320
321         opts = container_of(f, struct f_serial_opts, func_inst);
322         gserial_free_line(opts->port_num);
323         kfree(opts);
324 }
325
326 static struct usb_function_instance *gser_alloc_inst(void)
327 {
328         struct f_serial_opts *opts;
329         int ret;
330
331         opts = kzalloc(sizeof(*opts), GFP_KERNEL);
332         if (!opts)
333                 return ERR_PTR(-ENOMEM);
334
335         opts->func_inst.free_func_inst = gser_free_inst;
336         ret = gserial_alloc_line(&opts->port_num);
337         if (ret) {
338                 kfree(opts);
339                 return ERR_PTR(ret);
340         }
341         config_group_init_type_name(&opts->func_inst.group, "",
342                                     &serial_func_type);
343
344         return &opts->func_inst;
345 }
346
347 static void gser_free(struct usb_function *f)
348 {
349         struct f_gser *serial;
350
351         serial = func_to_gser(f);
352         kfree(serial);
353 }
354
355 static void gser_unbind(struct usb_configuration *c, struct usb_function *f)
356 {
357         usb_free_all_descriptors(f);
358 }
359
360 static struct usb_function *gser_alloc(struct usb_function_instance *fi)
361 {
362         struct f_gser   *gser;
363         struct f_serial_opts *opts;
364
365         /* allocate and initialize one new instance */
366         gser = kzalloc(sizeof(*gser), GFP_KERNEL);
367         if (!gser)
368                 return ERR_PTR(-ENOMEM);
369
370         opts = container_of(fi, struct f_serial_opts, func_inst);
371
372         gser->port_num = opts->port_num;
373
374         gser->port.func.name = "gser";
375         gser->port.func.strings = gser_strings;
376         gser->port.func.bind = gser_bind;
377         gser->port.func.unbind = gser_unbind;
378         gser->port.func.set_alt = gser_set_alt;
379         gser->port.func.disable = gser_disable;
380         gser->port.func.free_func = gser_free;
381
382         return &gser->port.func;
383 }
384
385 DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc);
386 MODULE_LICENSE("GPL");
387 MODULE_AUTHOR("Al Borchers");
388 MODULE_AUTHOR("David Brownell");