kernel/drivers/tty/serial/samsung.c

   1 /*
   2  * Driver core for Samsung SoC onboard UARTs.
   3  *
   4  * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
   5  *      http://armlinux.simtec.co.uk/
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 /* Hote on 2410 error handling
  13  *
  14  * The s3c2410 manual has a love/hate affair with the contents of the
  15  * UERSTAT register in the UART blocks, and keeps marking some of the
  16  * error bits as reserved. Having checked with the s3c2410x01,
  17  * it copes with BREAKs properly, so I am happy to ignore the RESERVED
  18  * feature from the latter versions of the manual.
  19  *
  20  * If it becomes aparrent that latter versions of the 2410 remove these
  21  * bits, then action will have to be taken to differentiate the versions
  22  * and change the policy on BREAK
  23  *
  24  * BJD, 04-Nov-2004
  25 */
  26
  27 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  28 #define SUPPORT_SYSRQ
  29 #endif
  30
  31 #include <linux/dmaengine.h>
  32 #include <linux/dma-mapping.h>
  33 #include <linux/slab.h>
  34 #include <linux/module.h>
  35 #include <linux/ioport.h>
  36 #include <linux/io.h>
  37 #include <linux/platform_device.h>
  38 #include <linux/init.h>
  39 #include <linux/sysrq.h>
  40 #include <linux/console.h>
  41 #include <linux/tty.h>
  42 #include <linux/tty_flip.h>
  43 #include <linux/serial_core.h>
  44 #include <linux/serial.h>
  45 #include <linux/serial_s3c.h>
  46 #include <linux/delay.h>
  47 #include <linux/clk.h>
  48 #include <linux/cpufreq.h>
  49 #include <linux/of.h>
  50
  51 #include <asm/irq.h>
  52
  53 #include "samsung.h"
  54
  55 #if     defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
  56         !defined(MODULE)
  57
  58 extern void printascii(const char *);
  59
  60 __printf(1, 2)
  61 static void dbg(const char *fmt, ...)
  62 {
  63         va_list va;
  64         char buff[256];
  65
  66         va_start(va, fmt);
  67         vscnprintf(buff, sizeof(buff), fmt, va);
  68         va_end(va);
  69
  70         printascii(buff);
  71 }
  72
  73 #else
  74 #define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0)
  75 #endif
  76
  77 /* UART name and device definitions */
  78
  79 #define S3C24XX_SERIAL_NAME     "ttySAC"
  80 #define S3C24XX_SERIAL_MAJOR    204
  81 #define S3C24XX_SERIAL_MINOR    64
  82
  83 #define S3C24XX_TX_PIO                  1
  84 #define S3C24XX_TX_DMA                  2
  85 #define S3C24XX_RX_PIO                  1
  86 #define S3C24XX_RX_DMA                  2
  87 /* macros to change one thing to another */
  88
  89 #define tx_enabled(port) ((port)->unused[0])
  90 #define rx_enabled(port) ((port)->unused[1])
  91
  92 /* flag to ignore all characters coming in */
  93 #define RXSTAT_DUMMY_READ (0x10000000)
  94
  95 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
  96 {
  97         return container_of(port, struct s3c24xx_uart_port, port);
  98 }
  99
 100 /* translate a port to the device name */
 101
 102 static inline const char *s3c24xx_serial_portname(struct uart_port *port)
 103 {
 104         return to_platform_device(port->dev)->name;
 105 }
 106
 107 static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
 108 {
 109         return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
 110 }
 111
 112 /*
 113  * s3c64xx and later SoC's include the interrupt mask and status registers in
 114  * the controller itself, unlike the s3c24xx SoC's which have these registers
 115  * in the interrupt controller. Check if the port type is s3c64xx or higher.
 116  */
 117 static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port)
 118 {
 119         return to_ourport(port)->info->type == PORT_S3C6400;
 120 }
 121
 122 static void s3c24xx_serial_rx_enable(struct uart_port *port)
 123 {
 124         unsigned long flags;
 125         unsigned int ucon, ufcon;
 126         int count = 10000;
 127
 128         spin_lock_irqsave(&port->lock, flags);
 129
 130         while (--count && !s3c24xx_serial_txempty_nofifo(port))
 131                 udelay(100);
 132
 133         ufcon = rd_regl(port, S3C2410_UFCON);
 134         ufcon |= S3C2410_UFCON_RESETRX;
 135         wr_regl(port, S3C2410_UFCON, ufcon);
 136
 137         ucon = rd_regl(port, S3C2410_UCON);
 138         ucon |= S3C2410_UCON_RXIRQMODE;
 139         wr_regl(port, S3C2410_UCON, ucon);
 140
 141         rx_enabled(port) = 1;
 142         spin_unlock_irqrestore(&port->lock, flags);
 143 }
 144
 145 static void s3c24xx_serial_rx_disable(struct uart_port *port)
 146 {
 147         unsigned long flags;
 148         unsigned int ucon;
 149
 150         spin_lock_irqsave(&port->lock, flags);
 151
 152         ucon = rd_regl(port, S3C2410_UCON);
 153         ucon &= ~S3C2410_UCON_RXIRQMODE;
 154         wr_regl(port, S3C2410_UCON, ucon);
 155
 156         rx_enabled(port) = 0;
 157         spin_unlock_irqrestore(&port->lock, flags);
 158 }
 159
 160 static void s3c24xx_serial_stop_tx(struct uart_port *port)
 161 {
 162         struct s3c24xx_uart_port *ourport = to_ourport(port);
 163         struct s3c24xx_uart_dma *dma = ourport->dma;
 164         struct circ_buf *xmit = &port->state->xmit;
 165         struct dma_tx_state state;
 166         int count;
 167
 168         if (!tx_enabled(port))
 169                 return;
 170
 171         if (s3c24xx_serial_has_interrupt_mask(port))
 172                 __set_bit(S3C64XX_UINTM_TXD,
 173                         portaddrl(port, S3C64XX_UINTM));
 174         else
 175                 disable_irq_nosync(ourport->tx_irq);
 176
 177         if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
 178                 dmaengine_pause(dma->tx_chan);
 179                 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
 180                 dmaengine_terminate_all(dma->tx_chan);
 181                 dma_sync_single_for_cpu(ourport->port.dev,
 182                         dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE);
 183                 async_tx_ack(dma->tx_desc);
 184                 count = dma->tx_bytes_requested - state.residue;
 185                 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
 186                 port->icount.tx += count;
 187         }
 188
 189         tx_enabled(port) = 0;
 190         ourport->tx_in_progress = 0;
 191
 192         if (port->flags & UPF_CONS_FLOW)
 193                 s3c24xx_serial_rx_enable(port);
 194
 195         ourport->tx_mode = 0;
 196 }
 197
 198 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
 199
 200 static void s3c24xx_serial_tx_dma_complete(void *args)
 201 {
 202         struct s3c24xx_uart_port *ourport = args;
 203         struct uart_port *port = &ourport->port;
 204         struct circ_buf *xmit = &port->state->xmit;
 205         struct s3c24xx_uart_dma *dma = ourport->dma;
 206         struct dma_tx_state state;
 207         unsigned long flags;
 208         int count;
 209
 210
 211         dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
 212         count = dma->tx_bytes_requested - state.residue;
 213         async_tx_ack(dma->tx_desc);
 214
 215         dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr,
 216                                 dma->tx_size, DMA_TO_DEVICE);
 217
 218         spin_lock_irqsave(&port->lock, flags);
 219
 220         xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
 221         port->icount.tx += count;
 222         ourport->tx_in_progress = 0;
 223
 224         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 225                 uart_write_wakeup(port);
 226
 227         s3c24xx_serial_start_next_tx(ourport);
 228         spin_unlock_irqrestore(&port->lock, flags);
 229 }
 230
 231 static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
 232 {
 233         struct uart_port *port = &ourport->port;
 234         u32 ucon;
 235
 236         /* Mask Tx interrupt */
 237         if (s3c24xx_serial_has_interrupt_mask(port))
 238                 __set_bit(S3C64XX_UINTM_TXD,
 239                           portaddrl(port, S3C64XX_UINTM));
 240         else
 241                 disable_irq_nosync(ourport->tx_irq);
 242
 243         /* Enable tx dma mode */
 244         ucon = rd_regl(port, S3C2410_UCON);
 245         ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
 246         ucon |= (dma_get_cache_alignment() >= 16) ?
 247                 S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
 248         ucon |= S3C64XX_UCON_TXMODE_DMA;
 249         wr_regl(port,  S3C2410_UCON, ucon);
 250
 251         ourport->tx_mode = S3C24XX_TX_DMA;
 252 }
 253
 254 static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
 255 {
 256         struct uart_port *port = &ourport->port;
 257         u32 ucon, ufcon;
 258
 259         /* Set ufcon txtrig */
 260         ourport->tx_in_progress = S3C24XX_TX_PIO;
 261         ufcon = rd_regl(port, S3C2410_UFCON);
 262         wr_regl(port,  S3C2410_UFCON, ufcon);
 263
 264         /* Enable tx pio mode */
 265         ucon = rd_regl(port, S3C2410_UCON);
 266         ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
 267         ucon |= S3C64XX_UCON_TXMODE_CPU;
 268         wr_regl(port,  S3C2410_UCON, ucon);
 269
 270         /* Unmask Tx interrupt */
 271         if (s3c24xx_serial_has_interrupt_mask(port))
 272                 __clear_bit(S3C64XX_UINTM_TXD,
 273                             portaddrl(port, S3C64XX_UINTM));
 274         else
 275                 enable_irq(ourport->tx_irq);
 276
 277         ourport->tx_mode = S3C24XX_TX_PIO;
 278 }
 279
 280 static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
 281 {
 282         if (ourport->tx_mode != S3C24XX_TX_PIO)
 283                 enable_tx_pio(ourport);
 284 }
 285
 286 static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
 287                                       unsigned int count)
 288 {
 289         struct uart_port *port = &ourport->port;
 290         struct circ_buf *xmit = &port->state->xmit;
 291         struct s3c24xx_uart_dma *dma = ourport->dma;
 292
 293
 294         if (ourport->tx_mode != S3C24XX_TX_DMA)
 295                 enable_tx_dma(ourport);
 296
 297         dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
 298         dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
 299
 300         dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr,
 301                                 dma->tx_size, DMA_TO_DEVICE);
 302
 303         dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
 304                                 dma->tx_transfer_addr, dma->tx_size,
 305                                 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 306         if (!dma->tx_desc) {
 307                 dev_err(ourport->port.dev, "Unable to get desc for Tx\n");
 308                 return -EIO;
 309         }
 310
 311         dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete;
 312         dma->tx_desc->callback_param = ourport;
 313         dma->tx_bytes_requested = dma->tx_size;
 314
 315         ourport->tx_in_progress = S3C24XX_TX_DMA;
 316         dma->tx_cookie = dmaengine_submit(dma->tx_desc);
 317         dma_async_issue_pending(dma->tx_chan);
 318         return 0;
 319 }
 320
 321 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
 322 {
 323         struct uart_port *port = &ourport->port;
 324         struct circ_buf *xmit = &port->state->xmit;
 325         unsigned long count;
 326
 327         /* Get data size up to the end of buffer */
 328         count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 329
 330         if (!count) {
 331                 s3c24xx_serial_stop_tx(port);
 332                 return;
 333         }
 334
 335         if (!ourport->dma || !ourport->dma->tx_chan ||
 336             count < ourport->min_dma_size ||
 337             xmit->tail & (dma_get_cache_alignment() - 1))
 338                 s3c24xx_serial_start_tx_pio(ourport);
 339         else
 340                 s3c24xx_serial_start_tx_dma(ourport, count);
 341 }
 342
 343 static void s3c24xx_serial_start_tx(struct uart_port *port)
 344 {
 345         struct s3c24xx_uart_port *ourport = to_ourport(port);
 346         struct circ_buf *xmit = &port->state->xmit;
 347
 348         if (!tx_enabled(port)) {
 349                 if (port->flags & UPF_CONS_FLOW)
 350                         s3c24xx_serial_rx_disable(port);
 351
 352                 tx_enabled(port) = 1;
 353                 if (!ourport->dma || !ourport->dma->tx_chan)
 354                         s3c24xx_serial_start_tx_pio(ourport);
 355         }
 356
 357         if (ourport->dma && ourport->dma->tx_chan) {
 358                 if (!uart_circ_empty(xmit) && !ourport->tx_in_progress)
 359                         s3c24xx_serial_start_next_tx(ourport);
 360         }
 361 }
 362
 363 static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
 364                 struct tty_port *tty, int count)
 365 {
 366         struct s3c24xx_uart_dma *dma = ourport->dma;
 367         int copied;
 368
 369         if (!count)
 370                 return;
 371
 372         dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr,
 373                                 dma->rx_size, DMA_FROM_DEVICE);
 374
 375         ourport->port.icount.rx += count;
 376         if (!tty) {
 377                 dev_err(ourport->port.dev, "No tty port\n");
 378                 return;
 379         }
 380         copied = tty_insert_flip_string(tty,
 381                         ((unsigned char *)(ourport->dma->rx_buf)), count);
 382         if (copied != count) {
 383                 WARN_ON(1);
 384                 dev_err(ourport->port.dev, "RxData copy to tty layer failed\n");
 385         }
 386 }
 387
 388 static void s3c24xx_serial_stop_rx(struct uart_port *port)
 389 {
 390         struct s3c24xx_uart_port *ourport = to_ourport(port);
 391         struct s3c24xx_uart_dma *dma = ourport->dma;
 392         struct tty_port *t = &port->state->port;
 393         struct dma_tx_state state;
 394         enum dma_status dma_status;
 395         unsigned int received;
 396
 397         if (rx_enabled(port)) {
 398                 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
 399                 if (s3c24xx_serial_has_interrupt_mask(port))
 400                         __set_bit(S3C64XX_UINTM_RXD,
 401                                 portaddrl(port, S3C64XX_UINTM));
 402                 else
 403                         disable_irq_nosync(ourport->rx_irq);
 404                 rx_enabled(port) = 0;
 405         }
 406         if (dma && dma->rx_chan) {
 407                 dmaengine_pause(dma->tx_chan);
 408                 dma_status = dmaengine_tx_status(dma->rx_chan,
 409                                 dma->rx_cookie, &state);
 410                 if (dma_status == DMA_IN_PROGRESS ||
 411                         dma_status == DMA_PAUSED) {
 412                         received = dma->rx_bytes_requested - state.residue;
 413                         dmaengine_terminate_all(dma->rx_chan);
 414                         s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
 415                 }
 416         }
 417 }
 418
 419 static inline struct s3c24xx_uart_info
 420         *s3c24xx_port_to_info(struct uart_port *port)
 421 {
 422         return to_ourport(port)->info;
 423 }
 424
 425 static inline struct s3c2410_uartcfg
 426         *s3c24xx_port_to_cfg(struct uart_port *port)
 427 {
 428         struct s3c24xx_uart_port *ourport;
 429
 430         if (port->dev == NULL)
 431                 return NULL;
 432
 433         ourport = container_of(port, struct s3c24xx_uart_port, port);
 434         return ourport->cfg;
 435 }
 436
 437 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
 438                                      unsigned long ufstat)
 439 {
 440         struct s3c24xx_uart_info *info = ourport->info;
 441
 442         if (ufstat & info->rx_fifofull)
 443                 return ourport->port.fifosize;
 444
 445         return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
 446 }
 447
 448 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport);
 449 static void s3c24xx_serial_rx_dma_complete(void *args)
 450 {
 451         struct s3c24xx_uart_port *ourport = args;
 452         struct uart_port *port = &ourport->port;
 453
 454         struct s3c24xx_uart_dma *dma = ourport->dma;
 455         struct tty_port *t = &port->state->port;
 456         struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
 457
 458         struct dma_tx_state state;
 459         unsigned long flags;
 460         int received;
 461
 462         dmaengine_tx_status(dma->rx_chan,  dma->rx_cookie, &state);
 463         received  = dma->rx_bytes_requested - state.residue;
 464         async_tx_ack(dma->rx_desc);
 465
 466         spin_lock_irqsave(&port->lock, flags);
 467
 468         if (received)
 469                 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
 470
 471         if (tty) {
 472                 tty_flip_buffer_push(t);
 473                 tty_kref_put(tty);
 474         }
 475
 476         s3c64xx_start_rx_dma(ourport);
 477
 478         spin_unlock_irqrestore(&port->lock, flags);
 479 }
 480
 481 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
 482 {
 483         struct s3c24xx_uart_dma *dma = ourport->dma;
 484
 485         dma_sync_single_for_device(ourport->port.dev, dma->rx_addr,
 486                                 dma->rx_size, DMA_FROM_DEVICE);
 487
 488         dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
 489                                 dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
 490                                 DMA_PREP_INTERRUPT);
 491         if (!dma->rx_desc) {
 492                 dev_err(ourport->port.dev, "Unable to get desc for Rx\n");
 493                 return;
 494         }
 495
 496         dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete;
 497         dma->rx_desc->callback_param = ourport;
 498         dma->rx_bytes_requested = dma->rx_size;
 499
 500         dma->rx_cookie = dmaengine_submit(dma->rx_desc);
 501         dma_async_issue_pending(dma->rx_chan);
 502 }
 503
 504 /* ? - where has parity gone?? */
 505 #define S3C2410_UERSTAT_PARITY (0x1000)
 506
 507 static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
 508 {
 509         struct uart_port *port = &ourport->port;
 510         unsigned int ucon;
 511
 512         /* set Rx mode to DMA mode */
 513         ucon = rd_regl(port, S3C2410_UCON);
 514         ucon &= ~(S3C64XX_UCON_RXBURST_MASK |
 515                         S3C64XX_UCON_TIMEOUT_MASK |
 516                         S3C64XX_UCON_EMPTYINT_EN |
 517                         S3C64XX_UCON_DMASUS_EN |
 518                         S3C64XX_UCON_TIMEOUT_EN |
 519                         S3C64XX_UCON_RXMODE_MASK);
 520         ucon |= S3C64XX_UCON_RXBURST_16 |
 521                         0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 522                         S3C64XX_UCON_EMPTYINT_EN |
 523                         S3C64XX_UCON_TIMEOUT_EN |
 524                         S3C64XX_UCON_RXMODE_DMA;
 525         wr_regl(port, S3C2410_UCON, ucon);
 526
 527         ourport->rx_mode = S3C24XX_RX_DMA;
 528 }
 529
 530 static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
 531 {
 532         struct uart_port *port = &ourport->port;
 533         unsigned int ucon;
 534
 535         /* set Rx mode to DMA mode */
 536         ucon = rd_regl(port, S3C2410_UCON);
 537         ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
 538                         S3C64XX_UCON_EMPTYINT_EN |
 539                         S3C64XX_UCON_DMASUS_EN |
 540                         S3C64XX_UCON_TIMEOUT_EN |
 541                         S3C64XX_UCON_RXMODE_MASK);
 542         ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 543                         S3C64XX_UCON_TIMEOUT_EN |
 544                         S3C64XX_UCON_RXMODE_CPU;
 545         wr_regl(port, S3C2410_UCON, ucon);
 546
 547         ourport->rx_mode = S3C24XX_RX_PIO;
 548 }
 549
 550 static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
 551
 552 static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
 553 {
 554         unsigned int utrstat, ufstat, received;
 555         struct s3c24xx_uart_port *ourport = dev_id;
 556         struct uart_port *port = &ourport->port;
 557         struct s3c24xx_uart_dma *dma = ourport->dma;
 558         struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
 559         struct tty_port *t = &port->state->port;
 560         unsigned long flags;
 561         struct dma_tx_state state;
 562
 563         utrstat = rd_regl(port, S3C2410_UTRSTAT);
 564         ufstat = rd_regl(port, S3C2410_UFSTAT);
 565
 566         spin_lock_irqsave(&port->lock, flags);
 567
 568         if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
 569                 s3c64xx_start_rx_dma(ourport);
 570                 if (ourport->rx_mode == S3C24XX_RX_PIO)
 571                         enable_rx_dma(ourport);
 572                 goto finish;
 573         }
 574
 575         if (ourport->rx_mode == S3C24XX_RX_DMA) {
 576                 dmaengine_pause(dma->rx_chan);
 577                 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
 578                 dmaengine_terminate_all(dma->rx_chan);
 579                 received = dma->rx_bytes_requested - state.residue;
 580                 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
 581
 582                 enable_rx_pio(ourport);
 583         }
 584
 585         s3c24xx_serial_rx_drain_fifo(ourport);
 586
 587         if (tty) {
 588                 tty_flip_buffer_push(t);
 589                 tty_kref_put(tty);
 590         }
 591
 592         wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
 593
 594 finish:
 595         spin_unlock_irqrestore(&port->lock, flags);
 596
 597         return IRQ_HANDLED;
 598 }
 599
 600 static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 601 {
 602         struct uart_port *port = &ourport->port;
 603         unsigned int ufcon, ch, flag, ufstat, uerstat;
 604         int max_count = port->fifosize;
 605
 606         while (max_count-- > 0) {
 607                 ufcon = rd_regl(port, S3C2410_UFCON);
 608                 ufstat = rd_regl(port, S3C2410_UFSTAT);
 609
 610                 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
 611                         break;
 612
 613                 uerstat = rd_regl(port, S3C2410_UERSTAT);
 614                 ch = rd_regb(port, S3C2410_URXH);
 615
 616                 if (port->flags & UPF_CONS_FLOW) {
 617                         int txe = s3c24xx_serial_txempty_nofifo(port);
 618
 619                         if (rx_enabled(port)) {
 620                                 if (!txe) {
 621                                         rx_enabled(port) = 0;
 622                                         continue;
 623                                 }
 624                         } else {
 625                                 if (txe) {
 626                                         ufcon |= S3C2410_UFCON_RESETRX;
 627                                         wr_regl(port, S3C2410_UFCON, ufcon);
 628                                         rx_enabled(port) = 1;
 629                                         return;
 630                                 }
 631                                 continue;
 632                         }
 633                 }
 634
 635                 /* insert the character into the buffer */
 636
 637                 flag = TTY_NORMAL;
 638                 port->icount.rx++;
 639
 640                 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
 641                         dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
 642                             ch, uerstat);
 643
 644                         /* check for break */
 645                         if (uerstat & S3C2410_UERSTAT_BREAK) {
 646                                 dbg("break!\n");
 647                                 port->icount.brk++;
 648                                 if (uart_handle_break(port))
 649                                         continue; /* Ignore character */
 650                         }
 651
 652                         if (uerstat & S3C2410_UERSTAT_FRAME)
 653                                 port->icount.frame++;
 654                         if (uerstat & S3C2410_UERSTAT_OVERRUN)
 655                                 port->icount.overrun++;
 656
 657                         uerstat &= port->read_status_mask;
 658
 659                         if (uerstat & S3C2410_UERSTAT_BREAK)
 660                                 flag = TTY_BREAK;
 661                         else if (uerstat & S3C2410_UERSTAT_PARITY)
 662                                 flag = TTY_PARITY;
 663                         else if (uerstat & (S3C2410_UERSTAT_FRAME |
 664                                             S3C2410_UERSTAT_OVERRUN))
 665                                 flag = TTY_FRAME;
 666                 }
 667
 668                 if (uart_handle_sysrq_char(port, ch))
 669                         continue; /* Ignore character */
 670
 671                 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
 672                                  ch, flag);
 673         }
 674
 675         tty_flip_buffer_push(&port->state->port);
 676 }
 677
 678 static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
 679 {
 680         struct s3c24xx_uart_port *ourport = dev_id;
 681         struct uart_port *port = &ourport->port;
 682         unsigned long flags;
 683
 684         spin_lock_irqsave(&port->lock, flags);
 685         s3c24xx_serial_rx_drain_fifo(ourport);
 686         spin_unlock_irqrestore(&port->lock, flags);
 687
 688         return IRQ_HANDLED;
 689 }
 690
 691
 692 static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
 693 {
 694         struct s3c24xx_uart_port *ourport = dev_id;
 695
 696         if (ourport->dma && ourport->dma->rx_chan)
 697                 return s3c24xx_serial_rx_chars_dma(dev_id);
 698         return s3c24xx_serial_rx_chars_pio(dev_id);
 699 }
 700
 701 static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 702 {
 703         struct s3c24xx_uart_port *ourport = id;
 704         struct uart_port *port = &ourport->port;
 705         struct circ_buf *xmit = &port->state->xmit;
 706         unsigned long flags;
 707         int count, dma_count = 0;
 708
 709         spin_lock_irqsave(&port->lock, flags);
 710
 711         count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 712
 713         if (ourport->dma && ourport->dma->tx_chan &&
 714             count >= ourport->min_dma_size) {
 715                 int align = dma_get_cache_alignment() -
 716                         (xmit->tail & (dma_get_cache_alignment() - 1));
 717                 if (count-align >= ourport->min_dma_size) {
 718                         dma_count = count-align;
 719                         count = align;
 720                 }
 721         }
 722
 723         if (port->x_char) {
 724                 wr_regb(port, S3C2410_UTXH, port->x_char);
 725                 port->icount.tx++;
 726                 port->x_char = 0;
 727                 goto out;
 728         }
 729
 730         /* if there isn't anything more to transmit, or the uart is now
 731          * stopped, disable the uart and exit
 732         */
 733
 734         if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 735                 s3c24xx_serial_stop_tx(port);
 736                 goto out;
 737         }
 738
 739         /* try and drain the buffer... */
 740
 741         if (count > port->fifosize) {
 742                 count = port->fifosize;
 743                 dma_count = 0;
 744         }
 745
 746         while (!uart_circ_empty(xmit) && count > 0) {
 747                 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
 748                         break;
 749
 750                 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
 751                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 752                 port->icount.tx++;
 753                 count--;
 754         }
 755
 756         if (!count && dma_count) {
 757                 s3c24xx_serial_start_tx_dma(ourport, dma_count);
 758                 goto out;
 759         }
 760
 761         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
 762                 spin_unlock(&port->lock);
 763                 uart_write_wakeup(port);
 764                 spin_lock(&port->lock);
 765         }
 766
 767         if (uart_circ_empty(xmit))
 768                 s3c24xx_serial_stop_tx(port);
 769
 770 out:
 771         spin_unlock_irqrestore(&port->lock, flags);
 772         return IRQ_HANDLED;
 773 }
 774
 775 /* interrupt handler for s3c64xx and later SoC's.*/
 776 static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
 777 {
 778         struct s3c24xx_uart_port *ourport = id;
 779         struct uart_port *port = &ourport->port;
 780         unsigned int pend = rd_regl(port, S3C64XX_UINTP);
 781         irqreturn_t ret = IRQ_HANDLED;
 782
 783         if (pend & S3C64XX_UINTM_RXD_MSK) {
 784                 ret = s3c24xx_serial_rx_chars(irq, id);
 785                 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
 786         }
 787         if (pend & S3C64XX_UINTM_TXD_MSK) {
 788                 ret = s3c24xx_serial_tx_chars(irq, id);
 789                 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
 790         }
 791         return ret;
 792 }
 793
 794 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 795 {
 796         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 797         unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
 798         unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
 799
 800         if (ufcon & S3C2410_UFCON_FIFOMODE) {
 801                 if ((ufstat & info->tx_fifomask) != 0 ||
 802                     (ufstat & info->tx_fifofull))
 803                         return 0;
 804
 805                 return 1;
 806         }
 807
 808         return s3c24xx_serial_txempty_nofifo(port);
 809 }
 810
 811 /* no modem control lines */
 812 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
 813 {
 814         unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
 815
 816         if (umstat & S3C2410_UMSTAT_CTS)
 817                 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
 818         else
 819                 return TIOCM_CAR | TIOCM_DSR;
 820 }
 821
 822 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 823 {
 824         unsigned int umcon = rd_regl(port, S3C2410_UMCON);
 825
 826         if (mctrl & TIOCM_RTS)
 827                 umcon |= S3C2410_UMCOM_RTS_LOW;
 828         else
 829                 umcon &= ~S3C2410_UMCOM_RTS_LOW;
 830
 831         wr_regl(port, S3C2410_UMCON, umcon);
 832 }
 833
 834 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
 835 {
 836         unsigned long flags;
 837         unsigned int ucon;
 838
 839         spin_lock_irqsave(&port->lock, flags);
 840
 841         ucon = rd_regl(port, S3C2410_UCON);
 842
 843         if (break_state)
 844                 ucon |= S3C2410_UCON_SBREAK;
 845         else
 846                 ucon &= ~S3C2410_UCON_SBREAK;
 847
 848         wr_regl(port, S3C2410_UCON, ucon);
 849
 850         spin_unlock_irqrestore(&port->lock, flags);
 851 }
 852
 853 static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 854 {
 855         struct s3c24xx_uart_dma *dma = p->dma;
 856         dma_cap_mask_t mask;
 857         unsigned long flags;
 858
 859         /* Default slave configuration parameters */
 860         dma->rx_conf.direction          = DMA_DEV_TO_MEM;
 861         dma->rx_conf.src_addr_width     = DMA_SLAVE_BUSWIDTH_1_BYTE;
 862         dma->rx_conf.src_addr           = p->port.mapbase + S3C2410_URXH;
 863         dma->rx_conf.src_maxburst       = 16;
 864
 865         dma->tx_conf.direction          = DMA_MEM_TO_DEV;
 866         dma->tx_conf.dst_addr_width     = DMA_SLAVE_BUSWIDTH_1_BYTE;
 867         dma->tx_conf.dst_addr           = p->port.mapbase + S3C2410_UTXH;
 868         if (dma_get_cache_alignment() >= 16)
 869                 dma->tx_conf.dst_maxburst = 16;
 870         else
 871                 dma->tx_conf.dst_maxburst = 1;
 872
 873         dma_cap_zero(mask);
 874         dma_cap_set(DMA_SLAVE, mask);
 875
 876         dma->rx_chan = dma_request_slave_channel_compat(mask, dma->fn,
 877                                         dma->rx_param, p->port.dev, "rx");
 878         if (!dma->rx_chan)
 879                 return -ENODEV;
 880
 881         dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
 882
 883         dma->tx_chan = dma_request_slave_channel_compat(mask, dma->fn,
 884                                         dma->tx_param, p->port.dev, "tx");
 885         if (!dma->tx_chan) {
 886                 dma_release_channel(dma->rx_chan);
 887                 return -ENODEV;
 888         }
 889
 890         dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
 891
 892         /* RX buffer */
 893         dma->rx_size = PAGE_SIZE;
 894
 895         dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
 896
 897         if (!dma->rx_buf) {
 898                 dma_release_channel(dma->rx_chan);
 899                 dma_release_channel(dma->tx_chan);
 900                 return -ENOMEM;
 901         }
 902
 903         dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
 904                                 dma->rx_size, DMA_FROM_DEVICE);
 905
 906         spin_lock_irqsave(&p->port.lock, flags);
 907
 908         /* TX buffer */
 909         dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
 910                                 p->port.state->xmit.buf,
 911                                 UART_XMIT_SIZE, DMA_TO_DEVICE);
 912
 913         spin_unlock_irqrestore(&p->port.lock, flags);
 914
 915         return 0;
 916 }
 917
 918 static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
 919 {
 920         struct s3c24xx_uart_dma *dma = p->dma;
 921
 922         if (dma->rx_chan) {
 923                 dmaengine_terminate_all(dma->rx_chan);
 924                 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
 925                                 dma->rx_size, DMA_FROM_DEVICE);
 926                 kfree(dma->rx_buf);
 927                 dma_release_channel(dma->rx_chan);
 928                 dma->rx_chan = NULL;
 929         }
 930
 931         if (dma->tx_chan) {
 932                 dmaengine_terminate_all(dma->tx_chan);
 933                 dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
 934                                 UART_XMIT_SIZE, DMA_TO_DEVICE);
 935                 dma_release_channel(dma->tx_chan);
 936                 dma->tx_chan = NULL;
 937         }
 938 }
 939
 940 static void s3c24xx_serial_shutdown(struct uart_port *port)
 941 {
 942         struct s3c24xx_uart_port *ourport = to_ourport(port);
 943
 944         if (ourport->tx_claimed) {
 945                 if (!s3c24xx_serial_has_interrupt_mask(port))
 946                         free_irq(ourport->tx_irq, ourport);
 947                 tx_enabled(port) = 0;
 948                 ourport->tx_claimed = 0;
 949                 ourport->tx_mode = 0;
 950         }
 951
 952         if (ourport->rx_claimed) {
 953                 if (!s3c24xx_serial_has_interrupt_mask(port))
 954                         free_irq(ourport->rx_irq, ourport);
 955                 ourport->rx_claimed = 0;
 956                 rx_enabled(port) = 0;
 957         }
 958
 959         /* Clear pending interrupts and mask all interrupts */
 960         if (s3c24xx_serial_has_interrupt_mask(port)) {
 961                 free_irq(port->irq, ourport);
 962
 963                 wr_regl(port, S3C64XX_UINTP, 0xf);
 964                 wr_regl(port, S3C64XX_UINTM, 0xf);
 965         }
 966
 967         if (ourport->dma)
 968                 s3c24xx_serial_release_dma(ourport);
 969
 970         ourport->tx_in_progress = 0;
 971 }
 972
 973 static int s3c24xx_serial_startup(struct uart_port *port)
 974 {
 975         struct s3c24xx_uart_port *ourport = to_ourport(port);
 976         int ret;
 977
 978         dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n",
 979             port, (unsigned long long)port->mapbase, port->membase);
 980
 981         rx_enabled(port) = 1;
 982
 983         ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
 984                           s3c24xx_serial_portname(port), ourport);
 985
 986         if (ret != 0) {
 987                 dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
 988                 return ret;
 989         }
 990
 991         ourport->rx_claimed = 1;
 992
 993         dbg("requesting tx irq...\n");
 994
 995         tx_enabled(port) = 1;
 996
 997         ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
 998                           s3c24xx_serial_portname(port), ourport);
 999
1000         if (ret) {
1001                 dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
1002                 goto err;
1003         }
1004
1005         ourport->tx_claimed = 1;
1006
1007         dbg("s3c24xx_serial_startup ok\n");
1008
1009         /* the port reset code should have done the correct
1010          * register setup for the port controls */
1011
1012         return ret;
1013
1014 err:
1015         s3c24xx_serial_shutdown(port);
1016         return ret;
1017 }
1018
1019 static int s3c64xx_serial_startup(struct uart_port *port)
1020 {
1021         struct s3c24xx_uart_port *ourport = to_ourport(port);
1022         unsigned long flags;
1023         unsigned int ufcon;
1024         int ret;
1025
1026         dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n",
1027             port, (unsigned long long)port->mapbase, port->membase);
1028
1029         wr_regl(port, S3C64XX_UINTM, 0xf);
1030         if (ourport->dma) {
1031                 ret = s3c24xx_serial_request_dma(ourport);
1032                 if (ret < 0) {
1033                         dev_warn(port->dev, "DMA request failed\n");
1034                         return ret;
1035                 }
1036         }
1037
1038         ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
1039                           s3c24xx_serial_portname(port), ourport);
1040         if (ret) {
1041                 dev_err(port->dev, "cannot get irq %d\n", port->irq);
1042                 return ret;
1043         }
1044
1045         /* For compatibility with s3c24xx Soc's */
1046         rx_enabled(port) = 1;
1047         ourport->rx_claimed = 1;
1048         tx_enabled(port) = 0;
1049         ourport->tx_claimed = 1;
1050
1051         spin_lock_irqsave(&port->lock, flags);
1052
1053         ufcon = rd_regl(port, S3C2410_UFCON);
1054         ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
1055         if (!uart_console(port))
1056                 ufcon |= S3C2410_UFCON_RESETTX;
1057         wr_regl(port, S3C2410_UFCON, ufcon);
1058
1059         enable_rx_pio(ourport);
1060
1061         spin_unlock_irqrestore(&port->lock, flags);
1062
1063         /* Enable Rx Interrupt */
1064         __clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM));
1065
1066         dbg("s3c64xx_serial_startup ok\n");
1067         return ret;
1068 }
1069
1070 /* power power management control */
1071
1072 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
1073                               unsigned int old)
1074 {
1075         struct s3c24xx_uart_port *ourport = to_ourport(port);
1076         int timeout = 10000;
1077
1078         ourport->pm_level = level;
1079
1080         switch (level) {
1081         case 3:
1082                 while (--timeout && !s3c24xx_serial_txempty_nofifo(port))
1083                         udelay(100);
1084
1085                 if (!IS_ERR(ourport->baudclk))
1086                         clk_disable_unprepare(ourport->baudclk);
1087
1088                 clk_disable_unprepare(ourport->clk);
1089                 break;
1090
1091         case 0:
1092                 clk_prepare_enable(ourport->clk);
1093
1094                 if (!IS_ERR(ourport->baudclk))
1095                         clk_prepare_enable(ourport->baudclk);
1096
1097                 break;
1098         default:
1099                 dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
1100         }
1101 }
1102
1103 /* baud rate calculation
1104  *
1105  * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
1106  * of different sources, including the peripheral clock ("pclk") and an
1107  * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
1108  * with a programmable extra divisor.
1109  *
1110  * The following code goes through the clock sources, and calculates the
1111  * baud clocks (and the resultant actual baud rates) and then tries to
1112  * pick the closest one and select that.
1113  *
1114 */
1115
1116 #define MAX_CLK_NAME_LENGTH 15
1117
1118 static inline int s3c24xx_serial_getsource(struct uart_port *port)
1119 {
1120         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1121         unsigned int ucon;
1122
1123         if (info->num_clks == 1)
1124                 return 0;
1125
1126         ucon = rd_regl(port, S3C2410_UCON);
1127         ucon &= info->clksel_mask;
1128         return ucon >> info->clksel_shift;
1129 }
1130
1131 static void s3c24xx_serial_setsource(struct uart_port *port,
1132                         unsigned int clk_sel)
1133 {
1134         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1135         unsigned int ucon;
1136
1137         if (info->num_clks == 1)
1138                 return;
1139
1140         ucon = rd_regl(port, S3C2410_UCON);
1141         if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
1142                 return;
1143
1144         ucon &= ~info->clksel_mask;
1145         ucon |= clk_sel << info->clksel_shift;
1146         wr_regl(port, S3C2410_UCON, ucon);
1147 }
1148
1149 static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
1150                         unsigned int req_baud, struct clk **best_clk,
1151                         unsigned int *clk_num)
1152 {
1153         struct s3c24xx_uart_info *info = ourport->info;
1154         struct clk *clk;
1155         unsigned long rate;
1156         unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
1157         char clkname[MAX_CLK_NAME_LENGTH];
1158         int calc_deviation, deviation = (1 << 30) - 1;
1159
1160         clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
1161                         ourport->info->def_clk_sel;
1162         for (cnt = 0; cnt < info->num_clks; cnt++) {
1163                 if (!(clk_sel & (1 << cnt)))
1164                         continue;
1165
1166                 sprintf(clkname, "clk_uart_baud%d", cnt);
1167                 clk = clk_get(ourport->port.dev, clkname);
1168                 if (IS_ERR(clk))
1169                         continue;
1170
1171                 rate = clk_get_rate(clk);
1172                 if (!rate)
1173                         continue;
1174
1175                 if (ourport->info->has_divslot) {
1176                         unsigned long div = rate / req_baud;
1177
1178                         /* The UDIVSLOT register on the newer UARTs allows us to
1179                          * get a divisor adjustment of 1/16th on the baud clock.
1180                          *
1181                          * We don't keep the UDIVSLOT value (the 16ths we
1182                          * calculated by not multiplying the baud by 16) as it
1183                          * is easy enough to recalculate.
1184                          */
1185
1186                         quot = div / 16;
1187                         baud = rate / div;
1188                 } else {
1189                         quot = (rate + (8 * req_baud)) / (16 * req_baud);
1190                         baud = rate / (quot * 16);
1191                 }
1192                 quot--;
1193
1194                 calc_deviation = req_baud - baud;
1195                 if (calc_deviation < 0)
1196                         calc_deviation = -calc_deviation;
1197
1198                 if (calc_deviation < deviation) {
1199                         *best_clk = clk;
1200                         best_quot = quot;
1201                         *clk_num = cnt;
1202                         deviation = calc_deviation;
1203                 }
1204         }
1205
1206         return best_quot;
1207 }
1208
1209 /* udivslot_table[]
1210  *
1211  * This table takes the fractional value of the baud divisor and gives
1212  * the recommended setting for the UDIVSLOT register.
1213  */
1214 static u16 udivslot_table[16] = {
1215         [0] = 0x0000,
1216         [1] = 0x0080,
1217         [2] = 0x0808,
1218         [3] = 0x0888,
1219         [4] = 0x2222,
1220         [5] = 0x4924,
1221         [6] = 0x4A52,
1222         [7] = 0x54AA,
1223         [8] = 0x5555,
1224         [9] = 0xD555,
1225         [10] = 0xD5D5,
1226         [11] = 0xDDD5,
1227         [12] = 0xDDDD,
1228         [13] = 0xDFDD,
1229         [14] = 0xDFDF,
1230         [15] = 0xFFDF,
1231 };
1232
1233 static void s3c24xx_serial_set_termios(struct uart_port *port,
1234                                        struct ktermios *termios,
1235                                        struct ktermios *old)
1236 {
1237         struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
1238         struct s3c24xx_uart_port *ourport = to_ourport(port);
1239         struct clk *clk = ERR_PTR(-EINVAL);
1240         unsigned long flags;
1241         unsigned int baud, quot, clk_sel = 0;
1242         unsigned int ulcon;
1243         unsigned int umcon;
1244         unsigned int udivslot = 0;
1245
1246         /*
1247          * We don't support modem control lines.
1248          */
1249         termios->c_cflag &= ~(HUPCL | CMSPAR);
1250         termios->c_cflag |= CLOCAL;
1251
1252         /*
1253          * Ask the core to calculate the divisor for us.
1254          */
1255
1256         baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
1257         quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
1258         if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
1259                 quot = port->custom_divisor;
1260         if (IS_ERR(clk))
1261                 return;
1262
1263         /* check to see if we need  to change clock source */
1264
1265         if (ourport->baudclk != clk) {
1266                 s3c24xx_serial_setsource(port, clk_sel);
1267
1268                 if (!IS_ERR(ourport->baudclk)) {
1269                         clk_disable_unprepare(ourport->baudclk);
1270                         ourport->baudclk = ERR_PTR(-EINVAL);
1271                 }
1272
1273                 clk_prepare_enable(clk);
1274
1275                 ourport->baudclk = clk;
1276                 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
1277         }
1278
1279         if (ourport->info->has_divslot) {
1280                 unsigned int div = ourport->baudclk_rate / baud;
1281
1282                 if (cfg->has_fracval) {
1283                         udivslot = (div & 15);
1284                         dbg("fracval = %04x\n", udivslot);
1285                 } else {
1286                         udivslot = udivslot_table[div & 15];
1287                         dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
1288                 }
1289         }
1290
1291         switch (termios->c_cflag & CSIZE) {
1292         case CS5:
1293                 dbg("config: 5bits/char\n");
1294                 ulcon = S3C2410_LCON_CS5;
1295                 break;
1296         case CS6:
1297                 dbg("config: 6bits/char\n");
1298                 ulcon = S3C2410_LCON_CS6;
1299                 break;
1300         case CS7:
1301                 dbg("config: 7bits/char\n");
1302                 ulcon = S3C2410_LCON_CS7;
1303                 break;
1304         case CS8:
1305         default:
1306                 dbg("config: 8bits/char\n");
1307                 ulcon = S3C2410_LCON_CS8;
1308                 break;
1309         }
1310
1311         /* preserve original lcon IR settings */
1312         ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
1313
1314         if (termios->c_cflag & CSTOPB)
1315                 ulcon |= S3C2410_LCON_STOPB;
1316
1317         if (termios->c_cflag & PARENB) {
1318                 if (termios->c_cflag & PARODD)
1319                         ulcon |= S3C2410_LCON_PODD;
1320                 else
1321                         ulcon |= S3C2410_LCON_PEVEN;
1322         } else {
1323                 ulcon |= S3C2410_LCON_PNONE;
1324         }
1325
1326         spin_lock_irqsave(&port->lock, flags);
1327
1328         dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
1329             ulcon, quot, udivslot);
1330
1331         wr_regl(port, S3C2410_ULCON, ulcon);
1332         wr_regl(port, S3C2410_UBRDIV, quot);
1333
1334         umcon = rd_regl(port, S3C2410_UMCON);
1335         if (termios->c_cflag & CRTSCTS) {
1336                 umcon |= S3C2410_UMCOM_AFC;
1337                 /* Disable RTS when RX FIFO contains 63 bytes */
1338                 umcon &= ~S3C2412_UMCON_AFC_8;
1339         } else {
1340                 umcon &= ~S3C2410_UMCOM_AFC;
1341         }
1342         wr_regl(port, S3C2410_UMCON, umcon);
1343
1344         if (ourport->info->has_divslot)
1345                 wr_regl(port, S3C2443_DIVSLOT, udivslot);
1346
1347         dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
1348             rd_regl(port, S3C2410_ULCON),
1349             rd_regl(port, S3C2410_UCON),
1350             rd_regl(port, S3C2410_UFCON));
1351
1352         /*
1353          * Update the per-port timeout.
1354          */
1355         uart_update_timeout(port, termios->c_cflag, baud);
1356
1357         /*
1358          * Which character status flags are we interested in?
1359          */
1360         port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
1361         if (termios->c_iflag & INPCK)
1362                 port->read_status_mask |= S3C2410_UERSTAT_FRAME |
1363                         S3C2410_UERSTAT_PARITY;
1364         /*
1365          * Which character status flags should we ignore?
1366          */
1367         port->ignore_status_mask = 0;
1368         if (termios->c_iflag & IGNPAR)
1369                 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
1370         if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
1371                 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
1372
1373         /*
1374          * Ignore all characters if CREAD is not set.
1375          */
1376         if ((termios->c_cflag & CREAD) == 0)
1377                 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
1378
1379         spin_unlock_irqrestore(&port->lock, flags);
1380 }
1381
1382 static const char *s3c24xx_serial_type(struct uart_port *port)
1383 {
1384         switch (port->type) {
1385         case PORT_S3C2410:
1386                 return "S3C2410";
1387         case PORT_S3C2440:
1388                 return "S3C2440";
1389         case PORT_S3C2412:
1390                 return "S3C2412";
1391         case PORT_S3C6400:
1392                 return "S3C6400/10";
1393         default:
1394                 return NULL;
1395         }
1396 }
1397
1398 #define MAP_SIZE (0x100)
1399
1400 static void s3c24xx_serial_release_port(struct uart_port *port)
1401 {
1402         release_mem_region(port->mapbase, MAP_SIZE);
1403 }
1404
1405 static int s3c24xx_serial_request_port(struct uart_port *port)
1406 {
1407         const char *name = s3c24xx_serial_portname(port);
1408         return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
1409 }
1410
1411 static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
1412 {
1413         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1414
1415         if (flags & UART_CONFIG_TYPE &&
1416             s3c24xx_serial_request_port(port) == 0)
1417                 port->type = info->type;
1418 }
1419
1420 /*
1421  * verify the new serial_struct (for TIOCSSERIAL).
1422  */
1423 static int
1424 s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
1425 {
1426         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1427
1428         if (ser->type != PORT_UNKNOWN && ser->type != info->type)
1429                 return -EINVAL;
1430
1431         return 0;
1432 }
1433
1434
1435 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1436
1437 static struct console s3c24xx_serial_console;
1438
1439 static int __init s3c24xx_serial_console_init(void)
1440 {
1441         register_console(&s3c24xx_serial_console);
1442         return 0;
1443 }
1444 console_initcall(s3c24xx_serial_console_init);
1445
1446 #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
1447 #else
1448 #define S3C24XX_SERIAL_CONSOLE NULL
1449 #endif
1450
1451 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1452 static int s3c24xx_serial_get_poll_char(struct uart_port *port);
1453 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
1454                          unsigned char c);
1455 #endif
1456
1457 static struct uart_ops s3c24xx_serial_ops = {
1458         .pm             = s3c24xx_serial_pm,
1459         .tx_empty       = s3c24xx_serial_tx_empty,
1460         .get_mctrl      = s3c24xx_serial_get_mctrl,
1461         .set_mctrl      = s3c24xx_serial_set_mctrl,
1462         .stop_tx        = s3c24xx_serial_stop_tx,
1463         .start_tx       = s3c24xx_serial_start_tx,
1464         .stop_rx        = s3c24xx_serial_stop_rx,
1465         .break_ctl      = s3c24xx_serial_break_ctl,
1466         .startup        = s3c24xx_serial_startup,
1467         .shutdown       = s3c24xx_serial_shutdown,
1468         .set_termios    = s3c24xx_serial_set_termios,
1469         .type           = s3c24xx_serial_type,
1470         .release_port   = s3c24xx_serial_release_port,
1471         .request_port   = s3c24xx_serial_request_port,
1472         .config_port    = s3c24xx_serial_config_port,
1473         .verify_port    = s3c24xx_serial_verify_port,
1474 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1475         .poll_get_char = s3c24xx_serial_get_poll_char,
1476         .poll_put_char = s3c24xx_serial_put_poll_char,
1477 #endif
1478 };
1479
1480 static struct uart_driver s3c24xx_uart_drv = {
1481         .owner          = THIS_MODULE,
1482         .driver_name    = "s3c2410_serial",
1483         .nr             = CONFIG_SERIAL_SAMSUNG_UARTS,
1484         .cons           = S3C24XX_SERIAL_CONSOLE,
1485         .dev_name       = S3C24XX_SERIAL_NAME,
1486         .major          = S3C24XX_SERIAL_MAJOR,
1487         .minor          = S3C24XX_SERIAL_MINOR,
1488 };
1489
1490 #define __PORT_LOCK_UNLOCKED(i) \
1491         __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock)
1492 static struct s3c24xx_uart_port
1493 s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
1494         [0] = {
1495                 .port = {
1496                         .lock           = __PORT_LOCK_UNLOCKED(0),
1497                         .iotype         = UPIO_MEM,
1498                         .uartclk        = 0,
1499                         .fifosize       = 16,
1500                         .ops            = &s3c24xx_serial_ops,
1501                         .flags          = UPF_BOOT_AUTOCONF,
1502                         .line           = 0,
1503                 }
1504         },
1505         [1] = {
1506                 .port = {
1507                         .lock           = __PORT_LOCK_UNLOCKED(1),
1508                         .iotype         = UPIO_MEM,
1509                         .uartclk        = 0,
1510                         .fifosize       = 16,
1511                         .ops            = &s3c24xx_serial_ops,
1512                         .flags          = UPF_BOOT_AUTOCONF,
1513                         .line           = 1,
1514                 }
1515         },
1516 #if CONFIG_SERIAL_SAMSUNG_UARTS > 2
1517
1518         [2] = {
1519                 .port = {
1520                         .lock           = __PORT_LOCK_UNLOCKED(2),
1521                         .iotype         = UPIO_MEM,
1522                         .uartclk        = 0,
1523                         .fifosize       = 16,
1524                         .ops            = &s3c24xx_serial_ops,
1525                         .flags          = UPF_BOOT_AUTOCONF,
1526                         .line           = 2,
1527                 }
1528         },
1529 #endif
1530 #if CONFIG_SERIAL_SAMSUNG_UARTS > 3
1531         [3] = {
1532                 .port = {
1533                         .lock           = __PORT_LOCK_UNLOCKED(3),
1534                         .iotype         = UPIO_MEM,
1535                         .uartclk        = 0,
1536                         .fifosize       = 16,
1537                         .ops            = &s3c24xx_serial_ops,
1538                         .flags          = UPF_BOOT_AUTOCONF,
1539                         .line           = 3,
1540                 }
1541         }
1542 #endif
1543 };
1544 #undef __PORT_LOCK_UNLOCKED
1545
1546 /* s3c24xx_serial_resetport
1547  *
1548  * reset the fifos and other the settings.
1549 */
1550
1551 static void s3c24xx_serial_resetport(struct uart_port *port,
1552                                    struct s3c2410_uartcfg *cfg)
1553 {
1554         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1555         unsigned long ucon = rd_regl(port, S3C2410_UCON);
1556         unsigned int ucon_mask;
1557
1558         ucon_mask = info->clksel_mask;
1559         if (info->type == PORT_S3C2440)
1560                 ucon_mask |= S3C2440_UCON0_DIVMASK;
1561
1562         ucon &= ucon_mask;
1563         wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
1564
1565         /* reset both fifos */
1566         wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1567         wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1568
1569         /* some delay is required after fifo reset */
1570         udelay(1);
1571 }
1572
1573
1574 #ifdef CONFIG_CPU_FREQ
1575
1576 static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
1577                                              unsigned long val, void *data)
1578 {
1579         struct s3c24xx_uart_port *port;
1580         struct uart_port *uport;
1581
1582         port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
1583         uport = &port->port;
1584
1585         /* check to see if port is enabled */
1586
1587         if (port->pm_level != 0)
1588                 return 0;
1589
1590         /* try and work out if the baudrate is changing, we can detect
1591          * a change in rate, but we do not have support for detecting
1592          * a disturbance in the clock-rate over the change.
1593          */
1594
1595         if (IS_ERR(port->baudclk))
1596                 goto exit;
1597
1598         if (port->baudclk_rate == clk_get_rate(port->baudclk))
1599                 goto exit;
1600
1601         if (val == CPUFREQ_PRECHANGE) {
1602                 /* we should really shut the port down whilst the
1603                  * frequency change is in progress. */
1604
1605         } else if (val == CPUFREQ_POSTCHANGE) {
1606                 struct ktermios *termios;
1607                 struct tty_struct *tty;
1608
1609                 if (uport->state == NULL)
1610                         goto exit;
1611
1612                 tty = uport->state->port.tty;
1613
1614                 if (tty == NULL)
1615                         goto exit;
1616
1617                 termios = &tty->termios;
1618
1619                 if (termios == NULL) {
1620                         dev_warn(uport->dev, "%s: no termios?\n", __func__);
1621                         goto exit;
1622                 }
1623
1624                 s3c24xx_serial_set_termios(uport, termios, NULL);
1625         }
1626
1627 exit:
1628         return 0;
1629 }
1630
1631 static inline int
1632 s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1633 {
1634         port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
1635
1636         return cpufreq_register_notifier(&port->freq_transition,
1637                                          CPUFREQ_TRANSITION_NOTIFIER);
1638 }
1639
1640 static inline void
1641 s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1642 {
1643         cpufreq_unregister_notifier(&port->freq_transition,
1644                                     CPUFREQ_TRANSITION_NOTIFIER);
1645 }
1646
1647 #else
1648 static inline int
1649 s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1650 {
1651         return 0;
1652 }
1653
1654 static inline void
1655 s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1656 {
1657 }
1658 #endif
1659
1660 /* s3c24xx_serial_init_port
1661  *
1662  * initialise a single serial port from the platform device given
1663  */
1664
1665 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
1666                                     struct platform_device *platdev)
1667 {
1668         struct uart_port *port = &ourport->port;
1669         struct s3c2410_uartcfg *cfg = ourport->cfg;
1670         struct resource *res;
1671         int ret;
1672
1673         dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
1674
1675         if (platdev == NULL)
1676                 return -ENODEV;
1677
1678         if (port->mapbase != 0)
1679                 return 0;
1680
1681         /* setup info for port */
1682         port->dev       = &platdev->dev;
1683
1684         /* Startup sequence is different for s3c64xx and higher SoC's */
1685         if (s3c24xx_serial_has_interrupt_mask(port))
1686                 s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
1687
1688         port->uartclk = 1;
1689
1690         if (cfg->uart_flags & UPF_CONS_FLOW) {
1691                 dbg("s3c24xx_serial_init_port: enabling flow control\n");
1692                 port->flags |= UPF_CONS_FLOW;
1693         }
1694
1695         /* sort our the physical and virtual addresses for each UART */
1696
1697         res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
1698         if (res == NULL) {
1699                 dev_err(port->dev, "failed to find memory resource for uart\n");
1700                 return -EINVAL;
1701         }
1702
1703         dbg("resource %pR)\n", res);
1704
1705         port->membase = devm_ioremap(port->dev, res->start, resource_size(res));
1706         if (!port->membase) {
1707                 dev_err(port->dev, "failed to remap controller address\n");
1708                 return -EBUSY;
1709         }
1710
1711         port->mapbase = res->start;
1712         ret = platform_get_irq(platdev, 0);
1713         if (ret < 0)
1714                 port->irq = 0;
1715         else {
1716                 port->irq = ret;
1717                 ourport->rx_irq = ret;
1718                 ourport->tx_irq = ret + 1;
1719         }
1720
1721         ret = platform_get_irq(platdev, 1);
1722         if (ret > 0)
1723                 ourport->tx_irq = ret;
1724         /*
1725          * DMA is currently supported only on DT platforms, if DMA properties
1726          * are specified.
1727          */
1728         if (platdev->dev.of_node && of_find_property(platdev->dev.of_node,
1729                                                      "dmas", NULL)) {
1730                 ourport->dma = devm_kzalloc(port->dev,
1731                                             sizeof(*ourport->dma),
1732                                             GFP_KERNEL);
1733                 if (!ourport->dma)
1734                         return -ENOMEM;
1735         }
1736
1737         ourport->clk    = clk_get(&platdev->dev, "uart");
1738         if (IS_ERR(ourport->clk)) {
1739                 pr_err("%s: Controller clock not found\n",
1740                                 dev_name(&platdev->dev));
1741                 return PTR_ERR(ourport->clk);
1742         }
1743
1744         ret = clk_prepare_enable(ourport->clk);
1745         if (ret) {
1746                 pr_err("uart: clock failed to prepare+enable: %d\n", ret);
1747                 clk_put(ourport->clk);
1748                 return ret;
1749         }
1750
1751         /* Keep all interrupts masked and cleared */
1752         if (s3c24xx_serial_has_interrupt_mask(port)) {
1753                 wr_regl(port, S3C64XX_UINTM, 0xf);
1754                 wr_regl(port, S3C64XX_UINTP, 0xf);
1755                 wr_regl(port, S3C64XX_UINTSP, 0xf);
1756         }
1757
1758         dbg("port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
1759             &port->mapbase, port->membase, port->irq,
1760             ourport->rx_irq, ourport->tx_irq, port->uartclk);
1761
1762         /* reset the fifos (and setup the uart) */
1763         s3c24xx_serial_resetport(port, cfg);
1764         return 0;
1765 }
1766
1767 /* Device driver serial port probe */
1768
1769 static const struct of_device_id s3c24xx_uart_dt_match[];
1770 static int probe_index;
1771
1772 static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
1773                         struct platform_device *pdev)
1774 {
1775 #ifdef CONFIG_OF
1776         if (pdev->dev.of_node) {
1777                 const struct of_device_id *match;
1778                 match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
1779                 return (struct s3c24xx_serial_drv_data *)match->data;
1780         }
1781 #endif
1782         return (struct s3c24xx_serial_drv_data *)
1783                         platform_get_device_id(pdev)->driver_data;
1784 }
1785
1786 static int s3c24xx_serial_probe(struct platform_device *pdev)
1787 {
1788         struct device_node *np = pdev->dev.of_node;
1789         struct s3c24xx_uart_port *ourport;
1790         int index = probe_index;
1791         int ret;
1792
1793         if (np) {
1794                 ret = of_alias_get_id(np, "serial");
1795                 if (ret >= 0)
1796                         index = ret;
1797         }
1798
1799         dbg("s3c24xx_serial_probe(%p) %d\n", pdev, index);
1800
1801         ourport = &s3c24xx_serial_ports[index];
1802
1803         ourport->drv_data = s3c24xx_get_driver_data(pdev);
1804         if (!ourport->drv_data) {
1805                 dev_err(&pdev->dev, "could not find driver data\n");
1806                 return -ENODEV;
1807         }
1808
1809         ourport->baudclk = ERR_PTR(-EINVAL);
1810         ourport->info = ourport->drv_data->info;
1811         ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
1812                         dev_get_platdata(&pdev->dev) :
1813                         ourport->drv_data->def_cfg;
1814
1815         if (np)
1816                 of_property_read_u32(np,
1817                         "samsung,uart-fifosize", &ourport->port.fifosize);
1818
1819         if (ourport->drv_data->fifosize[index])
1820                 ourport->port.fifosize = ourport->drv_data->fifosize[index];
1821         else if (ourport->info->fifosize)
1822                 ourport->port.fifosize = ourport->info->fifosize;
1823
1824         /*
1825          * DMA transfers must be aligned at least to cache line size,
1826          * so find minimal transfer size suitable for DMA mode
1827          */
1828         ourport->min_dma_size = max_t(int, ourport->port.fifosize,
1829                                     dma_get_cache_alignment());
1830
1831         probe_index++;
1832
1833         dbg("%s: initialising port %p...\n", __func__, ourport);
1834
1835         ret = s3c24xx_serial_init_port(ourport, pdev);
1836         if (ret < 0)
1837                 return ret;
1838
1839         if (!s3c24xx_uart_drv.state) {
1840                 ret = uart_register_driver(&s3c24xx_uart_drv);
1841                 if (ret < 0) {
1842                         pr_err("Failed to register Samsung UART driver\n");
1843                         return ret;
1844                 }
1845         }
1846
1847         dbg("%s: adding port\n", __func__);
1848         uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
1849         platform_set_drvdata(pdev, &ourport->port);
1850
1851         /*
1852          * Deactivate the clock enabled in s3c24xx_serial_init_port here,
1853          * so that a potential re-enablement through the pm-callback overlaps
1854          * and keeps the clock enabled in this case.
1855          */
1856         clk_disable_unprepare(ourport->clk);
1857
1858         ret = s3c24xx_serial_cpufreq_register(ourport);
1859         if (ret < 0)
1860                 dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
1861
1862         return 0;
1863 }
1864
1865 static int s3c24xx_serial_remove(struct platform_device *dev)
1866 {
1867         struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1868
1869         if (port) {
1870                 s3c24xx_serial_cpufreq_deregister(to_ourport(port));
1871                 uart_remove_one_port(&s3c24xx_uart_drv, port);
1872         }
1873
1874         uart_unregister_driver(&s3c24xx_uart_drv);
1875
1876         return 0;
1877 }
1878
1879 /* UART power management code */
1880 #ifdef CONFIG_PM_SLEEP
1881 static int s3c24xx_serial_suspend(struct device *dev)
1882 {
1883         struct uart_port *port = s3c24xx_dev_to_port(dev);
1884
1885         if (port)
1886                 uart_suspend_port(&s3c24xx_uart_drv, port);
1887
1888         return 0;
1889 }
1890
1891 static int s3c24xx_serial_resume(struct device *dev)
1892 {
1893         struct uart_port *port = s3c24xx_dev_to_port(dev);
1894         struct s3c24xx_uart_port *ourport = to_ourport(port);
1895
1896         if (port) {
1897                 clk_prepare_enable(ourport->clk);
1898                 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
1899                 clk_disable_unprepare(ourport->clk);
1900
1901                 uart_resume_port(&s3c24xx_uart_drv, port);
1902         }
1903
1904         return 0;
1905 }
1906
1907 static int s3c24xx_serial_resume_noirq(struct device *dev)
1908 {
1909         struct uart_port *port = s3c24xx_dev_to_port(dev);
1910
1911         if (port) {
1912                 /* restore IRQ mask */
1913                 if (s3c24xx_serial_has_interrupt_mask(port)) {
1914                         unsigned int uintm = 0xf;
1915                         if (tx_enabled(port))
1916                                 uintm &= ~S3C64XX_UINTM_TXD_MSK;
1917                         if (rx_enabled(port))
1918                                 uintm &= ~S3C64XX_UINTM_RXD_MSK;
1919                         wr_regl(port, S3C64XX_UINTM, uintm);
1920                 }
1921         }
1922
1923         return 0;
1924 }
1925
1926 static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
1927         .suspend = s3c24xx_serial_suspend,
1928         .resume = s3c24xx_serial_resume,
1929         .resume_noirq = s3c24xx_serial_resume_noirq,
1930 };
1931 #define SERIAL_SAMSUNG_PM_OPS   (&s3c24xx_serial_pm_ops)
1932
1933 #else /* !CONFIG_PM_SLEEP */
1934
1935 #define SERIAL_SAMSUNG_PM_OPS   NULL
1936 #endif /* CONFIG_PM_SLEEP */
1937
1938 /* Console code */
1939
1940 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1941
1942 static struct uart_port *cons_uart;
1943
1944 static int
1945 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
1946 {
1947         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1948         unsigned long ufstat, utrstat;
1949
1950         if (ufcon & S3C2410_UFCON_FIFOMODE) {
1951                 /* fifo mode - check amount of data in fifo registers... */
1952
1953                 ufstat = rd_regl(port, S3C2410_UFSTAT);
1954                 return (ufstat & info->tx_fifofull) ? 0 : 1;
1955         }
1956
1957         /* in non-fifo mode, we go and use the tx buffer empty */
1958
1959         utrstat = rd_regl(port, S3C2410_UTRSTAT);
1960         return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
1961 }
1962
1963 static bool
1964 s3c24xx_port_configured(unsigned int ucon)
1965 {
1966         /* consider the serial port configured if the tx/rx mode set */
1967         return (ucon & 0xf) != 0;
1968 }
1969
1970 #ifdef CONFIG_CONSOLE_POLL
1971 /*
1972  * Console polling routines for writing and reading from the uart while
1973  * in an interrupt or debug context.
1974  */
1975
1976 static int s3c24xx_serial_get_poll_char(struct uart_port *port)
1977 {
1978         struct s3c24xx_uart_port *ourport = to_ourport(port);
1979         unsigned int ufstat;
1980
1981         ufstat = rd_regl(port, S3C2410_UFSTAT);
1982         if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
1983                 return NO_POLL_CHAR;
1984
1985         return rd_regb(port, S3C2410_URXH);
1986 }
1987
1988 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
1989                 unsigned char c)
1990 {
1991         unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
1992         unsigned int ucon = rd_regl(port, S3C2410_UCON);
1993
1994         /* not possible to xmit on unconfigured port */
1995         if (!s3c24xx_port_configured(ucon))
1996                 return;
1997
1998         while (!s3c24xx_serial_console_txrdy(port, ufcon))
1999                 cpu_relax();
2000         wr_regb(port, S3C2410_UTXH, c);
2001 }
2002
2003 #endif /* CONFIG_CONSOLE_POLL */
2004
2005 static void
2006 s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
2007 {
2008         unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
2009
2010         while (!s3c24xx_serial_console_txrdy(port, ufcon))
2011                 cpu_relax();
2012         wr_regb(port, S3C2410_UTXH, ch);
2013 }
2014
2015 static void
2016 s3c24xx_serial_console_write(struct console *co, const char *s,
2017                              unsigned int count)
2018 {
2019         unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
2020
2021         /* not possible to xmit on unconfigured port */
2022         if (!s3c24xx_port_configured(ucon))
2023                 return;
2024
2025         uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
2026 }
2027
2028 static void __init
2029 s3c24xx_serial_get_options(struct uart_port *port, int *baud,
2030                            int *parity, int *bits)
2031 {
2032         struct clk *clk;
2033         unsigned int ulcon;
2034         unsigned int ucon;
2035         unsigned int ubrdiv;
2036         unsigned long rate;
2037         unsigned int clk_sel;
2038         char clk_name[MAX_CLK_NAME_LENGTH];
2039
2040         ulcon  = rd_regl(port, S3C2410_ULCON);
2041         ucon   = rd_regl(port, S3C2410_UCON);
2042         ubrdiv = rd_regl(port, S3C2410_UBRDIV);
2043
2044         dbg("s3c24xx_serial_get_options: port=%p\n"
2045             "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
2046             port, ulcon, ucon, ubrdiv);
2047
2048         if (s3c24xx_port_configured(ucon)) {
2049                 switch (ulcon & S3C2410_LCON_CSMASK) {
2050                 case S3C2410_LCON_CS5:
2051                         *bits = 5;
2052                         break;
2053                 case S3C2410_LCON_CS6:
2054                         *bits = 6;
2055                         break;
2056                 case S3C2410_LCON_CS7:
2057                         *bits = 7;
2058                         break;
2059                 case S3C2410_LCON_CS8:
2060                 default:
2061                         *bits = 8;
2062                         break;
2063                 }
2064
2065                 switch (ulcon & S3C2410_LCON_PMASK) {
2066                 case S3C2410_LCON_PEVEN:
2067                         *parity = 'e';
2068                         break;
2069
2070                 case S3C2410_LCON_PODD:
2071                         *parity = 'o';
2072                         break;
2073
2074                 case S3C2410_LCON_PNONE:
2075                 default:
2076                         *parity = 'n';
2077                 }
2078
2079                 /* now calculate the baud rate */
2080
2081                 clk_sel = s3c24xx_serial_getsource(port);
2082                 sprintf(clk_name, "clk_uart_baud%d", clk_sel);
2083
2084                 clk = clk_get(port->dev, clk_name);
2085                 if (!IS_ERR(clk))
2086                         rate = clk_get_rate(clk);
2087                 else
2088                         rate = 1;
2089
2090                 *baud = rate / (16 * (ubrdiv + 1));
2091                 dbg("calculated baud %d\n", *baud);
2092         }
2093
2094 }
2095
2096 static int __init
2097 s3c24xx_serial_console_setup(struct console *co, char *options)
2098 {
2099         struct uart_port *port;
2100         int baud = 9600;
2101         int bits = 8;
2102         int parity = 'n';
2103         int flow = 'n';
2104
2105         dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
2106             co, co->index, options);
2107
2108         /* is this a valid port */
2109
2110         if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
2111                 co->index = 0;
2112
2113         port = &s3c24xx_serial_ports[co->index].port;
2114
2115         /* is the port configured? */
2116
2117         if (port->mapbase == 0x0)
2118                 return -ENODEV;
2119
2120         cons_uart = port;
2121
2122         dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
2123
2124         /*
2125          * Check whether an invalid uart number has been specified, and
2126          * if so, search for the first available port that does have
2127          * console support.
2128          */
2129         if (options)
2130                 uart_parse_options(options, &baud, &parity, &bits, &flow);
2131         else
2132                 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
2133
2134         dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
2135
2136         return uart_set_options(port, co, baud, parity, bits, flow);
2137 }
2138
2139 static struct console s3c24xx_serial_console = {
2140         .name           = S3C24XX_SERIAL_NAME,
2141         .device         = uart_console_device,
2142         .flags          = CON_PRINTBUFFER,
2143         .index          = -1,
2144         .write          = s3c24xx_serial_console_write,
2145         .setup          = s3c24xx_serial_console_setup,
2146         .data           = &s3c24xx_uart_drv,
2147 };
2148 #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
2149
2150 #ifdef CONFIG_CPU_S3C2410
2151 static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
2152         .info = &(struct s3c24xx_uart_info) {
2153                 .name           = "Samsung S3C2410 UART",
2154                 .type           = PORT_S3C2410,
2155                 .fifosize       = 16,
2156                 .rx_fifomask    = S3C2410_UFSTAT_RXMASK,
2157                 .rx_fifoshift   = S3C2410_UFSTAT_RXSHIFT,
2158                 .rx_fifofull    = S3C2410_UFSTAT_RXFULL,
2159                 .tx_fifofull    = S3C2410_UFSTAT_TXFULL,
2160                 .tx_fifomask    = S3C2410_UFSTAT_TXMASK,
2161                 .tx_fifoshift   = S3C2410_UFSTAT_TXSHIFT,
2162                 .def_clk_sel    = S3C2410_UCON_CLKSEL0,
2163                 .num_clks       = 2,
2164                 .clksel_mask    = S3C2410_UCON_CLKMASK,
2165                 .clksel_shift   = S3C2410_UCON_CLKSHIFT,
2166         },
2167         .def_cfg = &(struct s3c2410_uartcfg) {
2168                 .ucon           = S3C2410_UCON_DEFAULT,
2169                 .ufcon          = S3C2410_UFCON_DEFAULT,
2170         },
2171 };
2172 #define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
2173 #else
2174 #define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2175 #endif
2176
2177 #ifdef CONFIG_CPU_S3C2412
2178 static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
2179         .info = &(struct s3c24xx_uart_info) {
2180                 .name           = "Samsung S3C2412 UART",
2181                 .type           = PORT_S3C2412,
2182                 .fifosize       = 64,
2183                 .has_divslot    = 1,
2184                 .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
2185                 .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
2186                 .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
2187                 .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
2188                 .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
2189                 .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
2190                 .def_clk_sel    = S3C2410_UCON_CLKSEL2,
2191                 .num_clks       = 4,
2192                 .clksel_mask    = S3C2412_UCON_CLKMASK,
2193                 .clksel_shift   = S3C2412_UCON_CLKSHIFT,
2194         },
2195         .def_cfg = &(struct s3c2410_uartcfg) {
2196                 .ucon           = S3C2410_UCON_DEFAULT,
2197                 .ufcon          = S3C2410_UFCON_DEFAULT,
2198         },
2199 };
2200 #define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
2201 #else
2202 #define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2203 #endif
2204
2205 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
2206         defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
2207 static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
2208         .info = &(struct s3c24xx_uart_info) {
2209                 .name           = "Samsung S3C2440 UART",
2210                 .type           = PORT_S3C2440,
2211                 .fifosize       = 64,
2212                 .has_divslot    = 1,
2213                 .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
2214                 .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
2215                 .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
2216                 .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
2217                 .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
2218                 .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
2219                 .def_clk_sel    = S3C2410_UCON_CLKSEL2,
2220                 .num_clks       = 4,
2221                 .clksel_mask    = S3C2412_UCON_CLKMASK,
2222                 .clksel_shift   = S3C2412_UCON_CLKSHIFT,
2223         },
2224         .def_cfg = &(struct s3c2410_uartcfg) {
2225                 .ucon           = S3C2410_UCON_DEFAULT,
2226                 .ufcon          = S3C2410_UFCON_DEFAULT,
2227         },
2228 };
2229 #define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
2230 #else
2231 #define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2232 #endif
2233
2234 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
2235 static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
2236         .info = &(struct s3c24xx_uart_info) {
2237                 .name           = "Samsung S3C6400 UART",
2238                 .type           = PORT_S3C6400,
2239                 .fifosize       = 64,
2240                 .has_divslot    = 1,
2241                 .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
2242                 .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
2243                 .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
2244                 .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
2245                 .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
2246                 .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
2247                 .def_clk_sel    = S3C2410_UCON_CLKSEL2,
2248                 .num_clks       = 4,
2249                 .clksel_mask    = S3C6400_UCON_CLKMASK,
2250                 .clksel_shift   = S3C6400_UCON_CLKSHIFT,
2251         },
2252         .def_cfg = &(struct s3c2410_uartcfg) {
2253                 .ucon           = S3C2410_UCON_DEFAULT,
2254                 .ufcon          = S3C2410_UFCON_DEFAULT,
2255         },
2256 };
2257 #define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
2258 #else
2259 #define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2260 #endif
2261
2262 #ifdef CONFIG_CPU_S5PV210
2263 static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
2264         .info = &(struct s3c24xx_uart_info) {
2265                 .name           = "Samsung S5PV210 UART",
2266                 .type           = PORT_S3C6400,
2267                 .has_divslot    = 1,
2268                 .rx_fifomask    = S5PV210_UFSTAT_RXMASK,
2269                 .rx_fifoshift   = S5PV210_UFSTAT_RXSHIFT,
2270                 .rx_fifofull    = S5PV210_UFSTAT_RXFULL,
2271                 .tx_fifofull    = S5PV210_UFSTAT_TXFULL,
2272                 .tx_fifomask    = S5PV210_UFSTAT_TXMASK,
2273                 .tx_fifoshift   = S5PV210_UFSTAT_TXSHIFT,
2274                 .def_clk_sel    = S3C2410_UCON_CLKSEL0,
2275                 .num_clks       = 2,
2276                 .clksel_mask    = S5PV210_UCON_CLKMASK,
2277                 .clksel_shift   = S5PV210_UCON_CLKSHIFT,
2278         },
2279         .def_cfg = &(struct s3c2410_uartcfg) {
2280                 .ucon           = S5PV210_UCON_DEFAULT,
2281                 .ufcon          = S5PV210_UFCON_DEFAULT,
2282         },
2283         .fifosize = { 256, 64, 16, 16 },
2284 };
2285 #define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
2286 #else
2287 #define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2288 #endif
2289
2290 #if defined(CONFIG_ARCH_EXYNOS)
2291 #define EXYNOS_COMMON_SERIAL_DRV_DATA                           \
2292         .info = &(struct s3c24xx_uart_info) {                   \
2293                 .name           = "Samsung Exynos UART",        \
2294                 .type           = PORT_S3C6400,                 \
2295                 .has_divslot    = 1,                            \
2296                 .rx_fifomask    = S5PV210_UFSTAT_RXMASK,        \
2297                 .rx_fifoshift   = S5PV210_UFSTAT_RXSHIFT,       \
2298                 .rx_fifofull    = S5PV210_UFSTAT_RXFULL,        \
2299                 .tx_fifofull    = S5PV210_UFSTAT_TXFULL,        \
2300                 .tx_fifomask    = S5PV210_UFSTAT_TXMASK,        \
2301                 .tx_fifoshift   = S5PV210_UFSTAT_TXSHIFT,       \
2302                 .def_clk_sel    = S3C2410_UCON_CLKSEL0,         \
2303                 .num_clks       = 1,                            \
2304                 .clksel_mask    = 0,                            \
2305                 .clksel_shift   = 0,                            \
2306         },                                                      \
2307         .def_cfg = &(struct s3c2410_uartcfg) {                  \
2308                 .ucon           = S5PV210_UCON_DEFAULT,         \
2309                 .ufcon          = S5PV210_UFCON_DEFAULT,        \
2310                 .has_fracval    = 1,                            \
2311         }                                                       \
2312
2313 static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
2314         EXYNOS_COMMON_SERIAL_DRV_DATA,
2315         .fifosize = { 256, 64, 16, 16 },
2316 };
2317
2318 static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
2319         EXYNOS_COMMON_SERIAL_DRV_DATA,
2320         .fifosize = { 64, 256, 16, 256 },
2321 };
2322
2323 #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
2324 #define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
2325 #else
2326 #define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2327 #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2328 #endif
2329
2330 static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
2331         {
2332                 .name           = "s3c2410-uart",
2333                 .driver_data    = S3C2410_SERIAL_DRV_DATA,
2334         }, {
2335                 .name           = "s3c2412-uart",
2336                 .driver_data    = S3C2412_SERIAL_DRV_DATA,
2337         }, {
2338                 .name           = "s3c2440-uart",
2339                 .driver_data    = S3C2440_SERIAL_DRV_DATA,
2340         }, {
2341                 .name           = "s3c6400-uart",
2342                 .driver_data    = S3C6400_SERIAL_DRV_DATA,
2343         }, {
2344                 .name           = "s5pv210-uart",
2345                 .driver_data    = S5PV210_SERIAL_DRV_DATA,
2346         }, {
2347                 .name           = "exynos4210-uart",
2348                 .driver_data    = EXYNOS4210_SERIAL_DRV_DATA,
2349         }, {
2350                 .name           = "exynos5433-uart",
2351                 .driver_data    = EXYNOS5433_SERIAL_DRV_DATA,
2352         },
2353         { },
2354 };
2355 MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
2356
2357 #ifdef CONFIG_OF
2358 static const struct of_device_id s3c24xx_uart_dt_match[] = {
2359         { .compatible = "samsung,s3c2410-uart",
2360                 .data = (void *)S3C2410_SERIAL_DRV_DATA },
2361         { .compatible = "samsung,s3c2412-uart",
2362                 .data = (void *)S3C2412_SERIAL_DRV_DATA },
2363         { .compatible = "samsung,s3c2440-uart",
2364                 .data = (void *)S3C2440_SERIAL_DRV_DATA },
2365         { .compatible = "samsung,s3c6400-uart",
2366                 .data = (void *)S3C6400_SERIAL_DRV_DATA },
2367         { .compatible = "samsung,s5pv210-uart",
2368                 .data = (void *)S5PV210_SERIAL_DRV_DATA },
2369         { .compatible = "samsung,exynos4210-uart",
2370                 .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
2371         { .compatible = "samsung,exynos5433-uart",
2372                 .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
2373         {},
2374 };
2375 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
2376 #endif
2377
2378 static struct platform_driver samsung_serial_driver = {
2379         .probe          = s3c24xx_serial_probe,
2380         .remove         = s3c24xx_serial_remove,
2381         .id_table       = s3c24xx_serial_driver_ids,
2382         .driver         = {
2383                 .name   = "samsung-uart",
2384                 .pm     = SERIAL_SAMSUNG_PM_OPS,
2385                 .of_match_table = of_match_ptr(s3c24xx_uart_dt_match),
2386         },
2387 };
2388
2389 module_platform_driver(samsung_serial_driver);
2390
2391 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
2392 /*
2393  * Early console.
2394  */
2395
2396 struct samsung_early_console_data {
2397         u32 txfull_mask;
2398 };
2399
2400 static void samsung_early_busyuart(struct uart_port *port)
2401 {
2402         while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE))
2403                 ;
2404 }
2405
2406 static void samsung_early_busyuart_fifo(struct uart_port *port)
2407 {
2408         struct samsung_early_console_data *data = port->private_data;
2409
2410         while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask)
2411                 ;
2412 }
2413
2414 static void samsung_early_putc(struct uart_port *port, int c)
2415 {
2416         if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE)
2417                 samsung_early_busyuart_fifo(port);
2418         else
2419                 samsung_early_busyuart(port);
2420
2421         writeb(c, port->membase + S3C2410_UTXH);
2422 }
2423
2424 static void samsung_early_write(struct console *con, const char *s, unsigned n)
2425 {
2426         struct earlycon_device *dev = con->data;
2427
2428         uart_console_write(&dev->port, s, n, samsung_early_putc);
2429 }
2430
2431 static int __init samsung_early_console_setup(struct earlycon_device *device,
2432                                               const char *opt)
2433 {
2434         if (!device->port.membase)
2435                 return -ENODEV;
2436
2437         device->con->write = samsung_early_write;
2438         return 0;
2439 }
2440
2441 /* S3C2410 */
2442 static struct samsung_early_console_data s3c2410_early_console_data = {
2443         .txfull_mask = S3C2410_UFSTAT_TXFULL,
2444 };
2445
2446 static int __init s3c2410_early_console_setup(struct earlycon_device *device,
2447                                               const char *opt)
2448 {
2449         device->port.private_data = &s3c2410_early_console_data;
2450         return samsung_early_console_setup(device, opt);
2451 }
2452 OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
2453                         s3c2410_early_console_setup);
2454 EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup);
2455
2456 /* S3C2412, S3C2440, S3C64xx */
2457 static struct samsung_early_console_data s3c2440_early_console_data = {
2458         .txfull_mask = S3C2440_UFSTAT_TXFULL,
2459 };
2460
2461 static int __init s3c2440_early_console_setup(struct earlycon_device *device,
2462                                               const char *opt)
2463 {
2464         device->port.private_data = &s3c2440_early_console_data;
2465         return samsung_early_console_setup(device, opt);
2466 }
2467 OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart",
2468                         s3c2440_early_console_setup);
2469 OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
2470                         s3c2440_early_console_setup);
2471 OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
2472                         s3c2440_early_console_setup);
2473 EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup);
2474 EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup);
2475 EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup);
2476
2477 /* S5PV210, EXYNOS */
2478 static struct samsung_early_console_data s5pv210_early_console_data = {
2479         .txfull_mask = S5PV210_UFSTAT_TXFULL,
2480 };
2481
2482 static int __init s5pv210_early_console_setup(struct earlycon_device *device,
2483                                               const char *opt)
2484 {
2485         device->port.private_data = &s5pv210_early_console_data;
2486         return samsung_early_console_setup(device, opt);
2487 }
2488 OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
2489                         s5pv210_early_console_setup);
2490 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
2491                         s5pv210_early_console_setup);
2492 EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup);
2493 EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup);
2494 #endif
2495
2496 MODULE_ALIAS("platform:samsung-uart");
2497 MODULE_DESCRIPTION("Samsung SoC Serial port driver");
2498 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
2499 MODULE_LICENSE("GPL v2");