kernel/drivers/tty/serial/samsung.c

   1 /*
   2  * Driver core for Samsung SoC onboard UARTs.
   3  *
   4  * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
   5  *      http://armlinux.simtec.co.uk/
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 /* Hote on 2410 error handling
  13  *
  14  * The s3c2410 manual has a love/hate affair with the contents of the
  15  * UERSTAT register in the UART blocks, and keeps marking some of the
  16  * error bits as reserved. Having checked with the s3c2410x01,
  17  * it copes with BREAKs properly, so I am happy to ignore the RESERVED
  18  * feature from the latter versions of the manual.
  19  *
  20  * If it becomes aparrent that latter versions of the 2410 remove these
  21  * bits, then action will have to be taken to differentiate the versions
  22  * and change the policy on BREAK
  23  *
  24  * BJD, 04-Nov-2004
  25 */
  26
  27 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  28 #define SUPPORT_SYSRQ
  29 #endif
  30
  31 #include <linux/dmaengine.h>
  32 #include <linux/dma-mapping.h>
  33 #include <linux/slab.h>
  34 #include <linux/module.h>
  35 #include <linux/ioport.h>
  36 #include <linux/io.h>
  37 #include <linux/platform_device.h>
  38 #include <linux/init.h>
  39 #include <linux/sysrq.h>
  40 #include <linux/console.h>
  41 #include <linux/tty.h>
  42 #include <linux/tty_flip.h>
  43 #include <linux/serial_core.h>
  44 #include <linux/serial.h>
  45 #include <linux/serial_s3c.h>
  46 #include <linux/delay.h>
  47 #include <linux/clk.h>
  48 #include <linux/cpufreq.h>
  49 #include <linux/of.h>
  50
  51 #include <asm/irq.h>
  52
  53 #include "samsung.h"
  54
  55 #if     defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
  56         defined(CONFIG_DEBUG_LL) &&             \
  57         !defined(MODULE)
  58
  59 extern void printascii(const char *);
  60
  61 __printf(1, 2)
  62 static void dbg(const char *fmt, ...)
  63 {
  64         va_list va;
  65         char buff[256];
  66
  67         va_start(va, fmt);
  68         vscnprintf(buff, sizeof(buff), fmt, va);
  69         va_end(va);
  70
  71         printascii(buff);
  72 }
  73
  74 #else
  75 #define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0)
  76 #endif
  77
  78 /* UART name and device definitions */
  79
  80 #define S3C24XX_SERIAL_NAME     "ttySAC"
  81 #define S3C24XX_SERIAL_MAJOR    204
  82 #define S3C24XX_SERIAL_MINOR    64
  83
  84 #define S3C24XX_TX_PIO                  1
  85 #define S3C24XX_TX_DMA                  2
  86 #define S3C24XX_RX_PIO                  1
  87 #define S3C24XX_RX_DMA                  2
  88 /* macros to change one thing to another */
  89
  90 #define tx_enabled(port) ((port)->unused[0])
  91 #define rx_enabled(port) ((port)->unused[1])
  92
  93 /* flag to ignore all characters coming in */
  94 #define RXSTAT_DUMMY_READ (0x10000000)
  95
  96 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
  97 {
  98         return container_of(port, struct s3c24xx_uart_port, port);
  99 }
 100
 101 /* translate a port to the device name */
 102
 103 static inline const char *s3c24xx_serial_portname(struct uart_port *port)
 104 {
 105         return to_platform_device(port->dev)->name;
 106 }
 107
 108 static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
 109 {
 110         return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
 111 }
 112
 113 /*
 114  * s3c64xx and later SoC's include the interrupt mask and status registers in
 115  * the controller itself, unlike the s3c24xx SoC's which have these registers
 116  * in the interrupt controller. Check if the port type is s3c64xx or higher.
 117  */
 118 static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port)
 119 {
 120         return to_ourport(port)->info->type == PORT_S3C6400;
 121 }
 122
 123 static void s3c24xx_serial_rx_enable(struct uart_port *port)
 124 {
 125         unsigned long flags;
 126         unsigned int ucon, ufcon;
 127         int count = 10000;
 128
 129         spin_lock_irqsave(&port->lock, flags);
 130
 131         while (--count && !s3c24xx_serial_txempty_nofifo(port))
 132                 udelay(100);
 133
 134         ufcon = rd_regl(port, S3C2410_UFCON);
 135         ufcon |= S3C2410_UFCON_RESETRX;
 136         wr_regl(port, S3C2410_UFCON, ufcon);
 137
 138         ucon = rd_regl(port, S3C2410_UCON);
 139         ucon |= S3C2410_UCON_RXIRQMODE;
 140         wr_regl(port, S3C2410_UCON, ucon);
 141
 142         rx_enabled(port) = 1;
 143         spin_unlock_irqrestore(&port->lock, flags);
 144 }
 145
 146 static void s3c24xx_serial_rx_disable(struct uart_port *port)
 147 {
 148         unsigned long flags;
 149         unsigned int ucon;
 150
 151         spin_lock_irqsave(&port->lock, flags);
 152
 153         ucon = rd_regl(port, S3C2410_UCON);
 154         ucon &= ~S3C2410_UCON_RXIRQMODE;
 155         wr_regl(port, S3C2410_UCON, ucon);
 156
 157         rx_enabled(port) = 0;
 158         spin_unlock_irqrestore(&port->lock, flags);
 159 }
 160
 161 static void s3c24xx_serial_stop_tx(struct uart_port *port)
 162 {
 163         struct s3c24xx_uart_port *ourport = to_ourport(port);
 164         struct s3c24xx_uart_dma *dma = ourport->dma;
 165         struct circ_buf *xmit = &port->state->xmit;
 166         struct dma_tx_state state;
 167         int count;
 168
 169         if (!tx_enabled(port))
 170                 return;
 171
 172         if (s3c24xx_serial_has_interrupt_mask(port))
 173                 __set_bit(S3C64XX_UINTM_TXD,
 174                         portaddrl(port, S3C64XX_UINTM));
 175         else
 176                 disable_irq_nosync(ourport->tx_irq);
 177
 178         if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
 179                 dmaengine_pause(dma->tx_chan);
 180                 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
 181                 dmaengine_terminate_all(dma->tx_chan);
 182                 dma_sync_single_for_cpu(ourport->port.dev,
 183                         dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE);
 184                 async_tx_ack(dma->tx_desc);
 185                 count = dma->tx_bytes_requested - state.residue;
 186                 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
 187                 port->icount.tx += count;
 188         }
 189
 190         tx_enabled(port) = 0;
 191         ourport->tx_in_progress = 0;
 192
 193         if (port->flags & UPF_CONS_FLOW)
 194                 s3c24xx_serial_rx_enable(port);
 195
 196         ourport->tx_mode = 0;
 197 }
 198
 199 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
 200
 201 static void s3c24xx_serial_tx_dma_complete(void *args)
 202 {
 203         struct s3c24xx_uart_port *ourport = args;
 204         struct uart_port *port = &ourport->port;
 205         struct circ_buf *xmit = &port->state->xmit;
 206         struct s3c24xx_uart_dma *dma = ourport->dma;
 207         struct dma_tx_state state;
 208         unsigned long flags;
 209         int count;
 210
 211
 212         dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
 213         count = dma->tx_bytes_requested - state.residue;
 214         async_tx_ack(dma->tx_desc);
 215
 216         dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr,
 217                                 dma->tx_size, DMA_TO_DEVICE);
 218
 219         spin_lock_irqsave(&port->lock, flags);
 220
 221         xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
 222         port->icount.tx += count;
 223         ourport->tx_in_progress = 0;
 224
 225         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 226                 uart_write_wakeup(port);
 227
 228         s3c24xx_serial_start_next_tx(ourport);
 229         spin_unlock_irqrestore(&port->lock, flags);
 230 }
 231
 232 static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
 233 {
 234         struct uart_port *port = &ourport->port;
 235         u32 ucon;
 236
 237         /* Mask Tx interrupt */
 238         if (s3c24xx_serial_has_interrupt_mask(port))
 239                 __set_bit(S3C64XX_UINTM_TXD,
 240                           portaddrl(port, S3C64XX_UINTM));
 241         else
 242                 disable_irq_nosync(ourport->tx_irq);
 243
 244         /* Enable tx dma mode */
 245         ucon = rd_regl(port, S3C2410_UCON);
 246         ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
 247         ucon |= (dma_get_cache_alignment() >= 16) ?
 248                 S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
 249         ucon |= S3C64XX_UCON_TXMODE_DMA;
 250         wr_regl(port,  S3C2410_UCON, ucon);
 251
 252         ourport->tx_mode = S3C24XX_TX_DMA;
 253 }
 254
 255 static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
 256 {
 257         struct uart_port *port = &ourport->port;
 258         u32 ucon, ufcon;
 259
 260         /* Set ufcon txtrig */
 261         ourport->tx_in_progress = S3C24XX_TX_PIO;
 262         ufcon = rd_regl(port, S3C2410_UFCON);
 263         wr_regl(port,  S3C2410_UFCON, ufcon);
 264
 265         /* Enable tx pio mode */
 266         ucon = rd_regl(port, S3C2410_UCON);
 267         ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
 268         ucon |= S3C64XX_UCON_TXMODE_CPU;
 269         wr_regl(port,  S3C2410_UCON, ucon);
 270
 271         /* Unmask Tx interrupt */
 272         if (s3c24xx_serial_has_interrupt_mask(port))
 273                 __clear_bit(S3C64XX_UINTM_TXD,
 274                             portaddrl(port, S3C64XX_UINTM));
 275         else
 276                 enable_irq(ourport->tx_irq);
 277
 278         ourport->tx_mode = S3C24XX_TX_PIO;
 279 }
 280
 281 static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
 282 {
 283         if (ourport->tx_mode != S3C24XX_TX_PIO)
 284                 enable_tx_pio(ourport);
 285 }
 286
 287 static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
 288                                       unsigned int count)
 289 {
 290         struct uart_port *port = &ourport->port;
 291         struct circ_buf *xmit = &port->state->xmit;
 292         struct s3c24xx_uart_dma *dma = ourport->dma;
 293
 294
 295         if (ourport->tx_mode != S3C24XX_TX_DMA)
 296                 enable_tx_dma(ourport);
 297
 298         while (xmit->tail & (dma_get_cache_alignment() - 1)) {
 299                 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
 300                         return 0;
 301                 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
 302                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 303                 port->icount.tx++;
 304                 count--;
 305         }
 306
 307         dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
 308         dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
 309
 310         dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr,
 311                                 dma->tx_size, DMA_TO_DEVICE);
 312
 313         dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
 314                                 dma->tx_transfer_addr, dma->tx_size,
 315                                 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 316         if (!dma->tx_desc) {
 317                 dev_err(ourport->port.dev, "Unable to get desc for Tx\n");
 318                 return -EIO;
 319         }
 320
 321         dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete;
 322         dma->tx_desc->callback_param = ourport;
 323         dma->tx_bytes_requested = dma->tx_size;
 324
 325         ourport->tx_in_progress = S3C24XX_TX_DMA;
 326         dma->tx_cookie = dmaengine_submit(dma->tx_desc);
 327         dma_async_issue_pending(dma->tx_chan);
 328         return 0;
 329 }
 330
 331 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
 332 {
 333         struct uart_port *port = &ourport->port;
 334         struct circ_buf *xmit = &port->state->xmit;
 335         unsigned long count;
 336
 337         /* Get data size up to the end of buffer */
 338         count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 339
 340         if (!count) {
 341                 s3c24xx_serial_stop_tx(port);
 342                 return;
 343         }
 344
 345         if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize)
 346                 s3c24xx_serial_start_tx_pio(ourport);
 347         else
 348                 s3c24xx_serial_start_tx_dma(ourport, count);
 349 }
 350
 351 void s3c24xx_serial_start_tx(struct uart_port *port)
 352 {
 353         struct s3c24xx_uart_port *ourport = to_ourport(port);
 354         struct circ_buf *xmit = &port->state->xmit;
 355
 356         if (!tx_enabled(port)) {
 357                 if (port->flags & UPF_CONS_FLOW)
 358                         s3c24xx_serial_rx_disable(port);
 359
 360                 tx_enabled(port) = 1;
 361                 if (!ourport->dma || !ourport->dma->tx_chan)
 362                         s3c24xx_serial_start_tx_pio(ourport);
 363         }
 364
 365         if (ourport->dma && ourport->dma->tx_chan) {
 366                 if (!uart_circ_empty(xmit) && !ourport->tx_in_progress)
 367                         s3c24xx_serial_start_next_tx(ourport);
 368         }
 369 }
 370
 371 static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
 372                 struct tty_port *tty, int count)
 373 {
 374         struct s3c24xx_uart_dma *dma = ourport->dma;
 375         int copied;
 376
 377         if (!count)
 378                 return;
 379
 380         dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr,
 381                                 dma->rx_size, DMA_FROM_DEVICE);
 382
 383         ourport->port.icount.rx += count;
 384         if (!tty) {
 385                 dev_err(ourport->port.dev, "No tty port\n");
 386                 return;
 387         }
 388         copied = tty_insert_flip_string(tty,
 389                         ((unsigned char *)(ourport->dma->rx_buf)), count);
 390         if (copied != count) {
 391                 WARN_ON(1);
 392                 dev_err(ourport->port.dev, "RxData copy to tty layer failed\n");
 393         }
 394 }
 395
 396 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
 397                                      unsigned long ufstat);
 398
 399 static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 400 {
 401         struct uart_port *port = &ourport->port;
 402         struct tty_port *tty = &port->state->port;
 403         unsigned int ch, ufstat;
 404         unsigned int count;
 405
 406         ufstat = rd_regl(port, S3C2410_UFSTAT);
 407         count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
 408
 409         if (!count)
 410                 return;
 411
 412         while (count-- > 0) {
 413                 ch = rd_regb(port, S3C2410_URXH);
 414
 415                 ourport->port.icount.rx++;
 416                 tty_insert_flip_char(tty, ch, TTY_NORMAL);
 417         }
 418
 419         tty_flip_buffer_push(tty);
 420 }
 421
 422 static void s3c24xx_serial_stop_rx(struct uart_port *port)
 423 {
 424         struct s3c24xx_uart_port *ourport = to_ourport(port);
 425         struct s3c24xx_uart_dma *dma = ourport->dma;
 426         struct tty_port *t = &port->state->port;
 427         struct dma_tx_state state;
 428         enum dma_status dma_status;
 429         unsigned int received;
 430
 431         if (rx_enabled(port)) {
 432                 dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
 433                 if (s3c24xx_serial_has_interrupt_mask(port))
 434                         __set_bit(S3C64XX_UINTM_RXD,
 435                                 portaddrl(port, S3C64XX_UINTM));
 436                 else
 437                         disable_irq_nosync(ourport->rx_irq);
 438                 rx_enabled(port) = 0;
 439         }
 440         if (dma && dma->rx_chan) {
 441                 dmaengine_pause(dma->tx_chan);
 442                 dma_status = dmaengine_tx_status(dma->rx_chan,
 443                                 dma->rx_cookie, &state);
 444                 if (dma_status == DMA_IN_PROGRESS ||
 445                         dma_status == DMA_PAUSED) {
 446                         received = dma->rx_bytes_requested - state.residue;
 447                         dmaengine_terminate_all(dma->rx_chan);
 448                         s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
 449                 }
 450         }
 451 }
 452
 453 static inline struct s3c24xx_uart_info
 454         *s3c24xx_port_to_info(struct uart_port *port)
 455 {
 456         return to_ourport(port)->info;
 457 }
 458
 459 static inline struct s3c2410_uartcfg
 460         *s3c24xx_port_to_cfg(struct uart_port *port)
 461 {
 462         struct s3c24xx_uart_port *ourport;
 463
 464         if (port->dev == NULL)
 465                 return NULL;
 466
 467         ourport = container_of(port, struct s3c24xx_uart_port, port);
 468         return ourport->cfg;
 469 }
 470
 471 static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
 472                                      unsigned long ufstat)
 473 {
 474         struct s3c24xx_uart_info *info = ourport->info;
 475
 476         if (ufstat & info->rx_fifofull)
 477                 return ourport->port.fifosize;
 478
 479         return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
 480 }
 481
 482 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport);
 483 static void s3c24xx_serial_rx_dma_complete(void *args)
 484 {
 485         struct s3c24xx_uart_port *ourport = args;
 486         struct uart_port *port = &ourport->port;
 487
 488         struct s3c24xx_uart_dma *dma = ourport->dma;
 489         struct tty_port *t = &port->state->port;
 490         struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
 491
 492         struct dma_tx_state state;
 493         unsigned long flags;
 494         int received;
 495
 496         dmaengine_tx_status(dma->rx_chan,  dma->rx_cookie, &state);
 497         received  = dma->rx_bytes_requested - state.residue;
 498         async_tx_ack(dma->rx_desc);
 499
 500         spin_lock_irqsave(&port->lock, flags);
 501
 502         if (received)
 503                 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
 504
 505         if (tty) {
 506                 tty_flip_buffer_push(t);
 507                 tty_kref_put(tty);
 508         }
 509
 510         s3c64xx_start_rx_dma(ourport);
 511
 512         spin_unlock_irqrestore(&port->lock, flags);
 513 }
 514
 515 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
 516 {
 517         struct s3c24xx_uart_dma *dma = ourport->dma;
 518
 519         dma_sync_single_for_device(ourport->port.dev, dma->rx_addr,
 520                                 dma->rx_size, DMA_FROM_DEVICE);
 521
 522         dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
 523                                 dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
 524                                 DMA_PREP_INTERRUPT);
 525         if (!dma->rx_desc) {
 526                 dev_err(ourport->port.dev, "Unable to get desc for Rx\n");
 527                 return;
 528         }
 529
 530         dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete;
 531         dma->rx_desc->callback_param = ourport;
 532         dma->rx_bytes_requested = dma->rx_size;
 533
 534         dma->rx_cookie = dmaengine_submit(dma->rx_desc);
 535         dma_async_issue_pending(dma->rx_chan);
 536 }
 537
 538 /* ? - where has parity gone?? */
 539 #define S3C2410_UERSTAT_PARITY (0x1000)
 540
 541 static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
 542 {
 543         struct uart_port *port = &ourport->port;
 544         unsigned int ucon;
 545
 546         /* set Rx mode to DMA mode */
 547         ucon = rd_regl(port, S3C2410_UCON);
 548         ucon &= ~(S3C64XX_UCON_RXBURST_MASK |
 549                         S3C64XX_UCON_TIMEOUT_MASK |
 550                         S3C64XX_UCON_EMPTYINT_EN |
 551                         S3C64XX_UCON_DMASUS_EN |
 552                         S3C64XX_UCON_TIMEOUT_EN |
 553                         S3C64XX_UCON_RXMODE_MASK);
 554         ucon |= S3C64XX_UCON_RXBURST_16 |
 555                         0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 556                         S3C64XX_UCON_EMPTYINT_EN |
 557                         S3C64XX_UCON_TIMEOUT_EN |
 558                         S3C64XX_UCON_RXMODE_DMA;
 559         wr_regl(port, S3C2410_UCON, ucon);
 560
 561         ourport->rx_mode = S3C24XX_RX_DMA;
 562 }
 563
 564 static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
 565 {
 566         struct uart_port *port = &ourport->port;
 567         unsigned int ucon;
 568
 569         /* set Rx mode to DMA mode */
 570         ucon = rd_regl(port, S3C2410_UCON);
 571         ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
 572                         S3C64XX_UCON_EMPTYINT_EN |
 573                         S3C64XX_UCON_DMASUS_EN |
 574                         S3C64XX_UCON_TIMEOUT_EN |
 575                         S3C64XX_UCON_RXMODE_MASK);
 576         ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
 577                         S3C64XX_UCON_TIMEOUT_EN |
 578                         S3C64XX_UCON_RXMODE_CPU;
 579         wr_regl(port, S3C2410_UCON, ucon);
 580
 581         ourport->rx_mode = S3C24XX_RX_PIO;
 582 }
 583
 584 static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id)
 585 {
 586         unsigned int utrstat, ufstat, received;
 587         struct s3c24xx_uart_port *ourport = dev_id;
 588         struct uart_port *port = &ourport->port;
 589         struct s3c24xx_uart_dma *dma = ourport->dma;
 590         struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
 591         struct tty_port *t = &port->state->port;
 592         unsigned long flags;
 593         struct dma_tx_state state;
 594
 595         utrstat = rd_regl(port, S3C2410_UTRSTAT);
 596         ufstat = rd_regl(port, S3C2410_UFSTAT);
 597
 598         spin_lock_irqsave(&port->lock, flags);
 599
 600         if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
 601                 s3c64xx_start_rx_dma(ourport);
 602                 if (ourport->rx_mode == S3C24XX_RX_PIO)
 603                         enable_rx_dma(ourport);
 604                 goto finish;
 605         }
 606
 607         if (ourport->rx_mode == S3C24XX_RX_DMA) {
 608                 dmaengine_pause(dma->rx_chan);
 609                 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
 610                 dmaengine_terminate_all(dma->rx_chan);
 611                 received = dma->rx_bytes_requested - state.residue;
 612                 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
 613
 614                 enable_rx_pio(ourport);
 615         }
 616
 617         uart_rx_drain_fifo(ourport);
 618
 619         if (tty) {
 620                 tty_flip_buffer_push(t);
 621                 tty_kref_put(tty);
 622         }
 623
 624         wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
 625
 626 finish:
 627         spin_unlock_irqrestore(&port->lock, flags);
 628
 629         return IRQ_HANDLED;
 630 }
 631
 632 static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
 633 {
 634         struct s3c24xx_uart_port *ourport = dev_id;
 635         struct uart_port *port = &ourport->port;
 636         unsigned int ufcon, ch, flag, ufstat, uerstat;
 637         unsigned long flags;
 638         int max_count = port->fifosize;
 639
 640         spin_lock_irqsave(&port->lock, flags);
 641
 642         while (max_count-- > 0) {
 643                 ufcon = rd_regl(port, S3C2410_UFCON);
 644                 ufstat = rd_regl(port, S3C2410_UFSTAT);
 645
 646                 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
 647                         break;
 648
 649                 uerstat = rd_regl(port, S3C2410_UERSTAT);
 650                 ch = rd_regb(port, S3C2410_URXH);
 651
 652                 if (port->flags & UPF_CONS_FLOW) {
 653                         int txe = s3c24xx_serial_txempty_nofifo(port);
 654
 655                         if (rx_enabled(port)) {
 656                                 if (!txe) {
 657                                         rx_enabled(port) = 0;
 658                                         continue;
 659                                 }
 660                         } else {
 661                                 if (txe) {
 662                                         ufcon |= S3C2410_UFCON_RESETRX;
 663                                         wr_regl(port, S3C2410_UFCON, ufcon);
 664                                         rx_enabled(port) = 1;
 665                                         spin_unlock_irqrestore(&port->lock,
 666                                                         flags);
 667                                         goto out;
 668                                 }
 669                                 continue;
 670                         }
 671                 }
 672
 673                 /* insert the character into the buffer */
 674
 675                 flag = TTY_NORMAL;
 676                 port->icount.rx++;
 677
 678                 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
 679                         dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
 680                             ch, uerstat);
 681
 682                         /* check for break */
 683                         if (uerstat & S3C2410_UERSTAT_BREAK) {
 684                                 dbg("break!\n");
 685                                 port->icount.brk++;
 686                                 if (uart_handle_break(port))
 687                                         goto ignore_char;
 688                         }
 689
 690                         if (uerstat & S3C2410_UERSTAT_FRAME)
 691                                 port->icount.frame++;
 692                         if (uerstat & S3C2410_UERSTAT_OVERRUN)
 693                                 port->icount.overrun++;
 694
 695                         uerstat &= port->read_status_mask;
 696
 697                         if (uerstat & S3C2410_UERSTAT_BREAK)
 698                                 flag = TTY_BREAK;
 699                         else if (uerstat & S3C2410_UERSTAT_PARITY)
 700                                 flag = TTY_PARITY;
 701                         else if (uerstat & (S3C2410_UERSTAT_FRAME |
 702                                             S3C2410_UERSTAT_OVERRUN))
 703                                 flag = TTY_FRAME;
 704                 }
 705
 706                 if (uart_handle_sysrq_char(port, ch))
 707                         goto ignore_char;
 708
 709                 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
 710                                  ch, flag);
 711
 712 ignore_char:
 713                 continue;
 714         }
 715
 716         spin_unlock_irqrestore(&port->lock, flags);
 717         tty_flip_buffer_push(&port->state->port);
 718
 719 out:
 720         return IRQ_HANDLED;
 721 }
 722
 723
 724 static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
 725 {
 726         struct s3c24xx_uart_port *ourport = dev_id;
 727
 728         if (ourport->dma && ourport->dma->rx_chan)
 729                 return s3c24xx_serial_rx_chars_dma(irq, dev_id);
 730         return s3c24xx_serial_rx_chars_pio(irq, dev_id);
 731 }
 732
 733 static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 734 {
 735         struct s3c24xx_uart_port *ourport = id;
 736         struct uart_port *port = &ourport->port;
 737         struct circ_buf *xmit = &port->state->xmit;
 738         unsigned long flags;
 739         int count;
 740
 741         spin_lock_irqsave(&port->lock, flags);
 742
 743         count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 744
 745         if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) {
 746                 s3c24xx_serial_start_tx_dma(ourport, count);
 747                 goto out;
 748         }
 749
 750         if (port->x_char) {
 751                 wr_regb(port, S3C2410_UTXH, port->x_char);
 752                 port->icount.tx++;
 753                 port->x_char = 0;
 754                 goto out;
 755         }
 756
 757         /* if there isn't anything more to transmit, or the uart is now
 758          * stopped, disable the uart and exit
 759         */
 760
 761         if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 762                 s3c24xx_serial_stop_tx(port);
 763                 goto out;
 764         }
 765
 766         /* try and drain the buffer... */
 767
 768         count = port->fifosize;
 769         while (!uart_circ_empty(xmit) && count-- > 0) {
 770                 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
 771                         break;
 772
 773                 wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
 774                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 775                 port->icount.tx++;
 776         }
 777
 778         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
 779                 spin_unlock(&port->lock);
 780                 uart_write_wakeup(port);
 781                 spin_lock(&port->lock);
 782         }
 783
 784         if (uart_circ_empty(xmit))
 785                 s3c24xx_serial_stop_tx(port);
 786
 787 out:
 788         spin_unlock_irqrestore(&port->lock, flags);
 789         return IRQ_HANDLED;
 790 }
 791
 792 /* interrupt handler for s3c64xx and later SoC's.*/
 793 static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
 794 {
 795         struct s3c24xx_uart_port *ourport = id;
 796         struct uart_port *port = &ourport->port;
 797         unsigned int pend = rd_regl(port, S3C64XX_UINTP);
 798         irqreturn_t ret = IRQ_HANDLED;
 799
 800         if (pend & S3C64XX_UINTM_RXD_MSK) {
 801                 ret = s3c24xx_serial_rx_chars(irq, id);
 802                 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
 803         }
 804         if (pend & S3C64XX_UINTM_TXD_MSK) {
 805                 ret = s3c24xx_serial_tx_chars(irq, id);
 806                 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
 807         }
 808         return ret;
 809 }
 810
 811 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
 812 {
 813         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
 814         unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
 815         unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
 816
 817         if (ufcon & S3C2410_UFCON_FIFOMODE) {
 818                 if ((ufstat & info->tx_fifomask) != 0 ||
 819                     (ufstat & info->tx_fifofull))
 820                         return 0;
 821
 822                 return 1;
 823         }
 824
 825         return s3c24xx_serial_txempty_nofifo(port);
 826 }
 827
 828 /* no modem control lines */
 829 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
 830 {
 831         unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
 832
 833         if (umstat & S3C2410_UMSTAT_CTS)
 834                 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
 835         else
 836                 return TIOCM_CAR | TIOCM_DSR;
 837 }
 838
 839 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 840 {
 841         unsigned int umcon = rd_regl(port, S3C2410_UMCON);
 842
 843         if (mctrl & TIOCM_RTS)
 844                 umcon |= S3C2410_UMCOM_RTS_LOW;
 845         else
 846                 umcon &= ~S3C2410_UMCOM_RTS_LOW;
 847
 848         wr_regl(port, S3C2410_UMCON, umcon);
 849 }
 850
 851 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
 852 {
 853         unsigned long flags;
 854         unsigned int ucon;
 855
 856         spin_lock_irqsave(&port->lock, flags);
 857
 858         ucon = rd_regl(port, S3C2410_UCON);
 859
 860         if (break_state)
 861                 ucon |= S3C2410_UCON_SBREAK;
 862         else
 863                 ucon &= ~S3C2410_UCON_SBREAK;
 864
 865         wr_regl(port, S3C2410_UCON, ucon);
 866
 867         spin_unlock_irqrestore(&port->lock, flags);
 868 }
 869
 870 static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
 871 {
 872         struct s3c24xx_uart_dma *dma = p->dma;
 873         dma_cap_mask_t mask;
 874         unsigned long flags;
 875
 876         /* Default slave configuration parameters */
 877         dma->rx_conf.direction          = DMA_DEV_TO_MEM;
 878         dma->rx_conf.src_addr_width     = DMA_SLAVE_BUSWIDTH_1_BYTE;
 879         dma->rx_conf.src_addr           = p->port.mapbase + S3C2410_URXH;
 880         dma->rx_conf.src_maxburst       = 16;
 881
 882         dma->tx_conf.direction          = DMA_MEM_TO_DEV;
 883         dma->tx_conf.dst_addr_width     = DMA_SLAVE_BUSWIDTH_1_BYTE;
 884         dma->tx_conf.dst_addr           = p->port.mapbase + S3C2410_UTXH;
 885         if (dma_get_cache_alignment() >= 16)
 886                 dma->tx_conf.dst_maxburst = 16;
 887         else
 888                 dma->tx_conf.dst_maxburst = 1;
 889
 890         dma_cap_zero(mask);
 891         dma_cap_set(DMA_SLAVE, mask);
 892
 893         dma->rx_chan = dma_request_slave_channel_compat(mask, dma->fn,
 894                                         dma->rx_param, p->port.dev, "rx");
 895         if (!dma->rx_chan)
 896                 return -ENODEV;
 897
 898         dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
 899
 900         dma->tx_chan = dma_request_slave_channel_compat(mask, dma->fn,
 901                                         dma->tx_param, p->port.dev, "tx");
 902         if (!dma->tx_chan) {
 903                 dma_release_channel(dma->rx_chan);
 904                 return -ENODEV;
 905         }
 906
 907         dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
 908
 909         /* RX buffer */
 910         dma->rx_size = PAGE_SIZE;
 911
 912         dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
 913
 914         if (!dma->rx_buf) {
 915                 dma_release_channel(dma->rx_chan);
 916                 dma_release_channel(dma->tx_chan);
 917                 return -ENOMEM;
 918         }
 919
 920         dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
 921                                 dma->rx_size, DMA_FROM_DEVICE);
 922
 923         spin_lock_irqsave(&p->port.lock, flags);
 924
 925         /* TX buffer */
 926         dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
 927                                 p->port.state->xmit.buf,
 928                                 UART_XMIT_SIZE, DMA_TO_DEVICE);
 929
 930         spin_unlock_irqrestore(&p->port.lock, flags);
 931
 932         return 0;
 933 }
 934
 935 static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
 936 {
 937         struct s3c24xx_uart_dma *dma = p->dma;
 938
 939         if (dma->rx_chan) {
 940                 dmaengine_terminate_all(dma->rx_chan);
 941                 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
 942                                 dma->rx_size, DMA_FROM_DEVICE);
 943                 kfree(dma->rx_buf);
 944                 dma_release_channel(dma->rx_chan);
 945                 dma->rx_chan = NULL;
 946         }
 947
 948         if (dma->tx_chan) {
 949                 dmaengine_terminate_all(dma->tx_chan);
 950                 dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
 951                                 UART_XMIT_SIZE, DMA_TO_DEVICE);
 952                 dma_release_channel(dma->tx_chan);
 953                 dma->tx_chan = NULL;
 954         }
 955 }
 956
 957 static void s3c24xx_serial_shutdown(struct uart_port *port)
 958 {
 959         struct s3c24xx_uart_port *ourport = to_ourport(port);
 960
 961         if (ourport->tx_claimed) {
 962                 if (!s3c24xx_serial_has_interrupt_mask(port))
 963                         free_irq(ourport->tx_irq, ourport);
 964                 tx_enabled(port) = 0;
 965                 ourport->tx_claimed = 0;
 966                 ourport->tx_mode = 0;
 967         }
 968
 969         if (ourport->rx_claimed) {
 970                 if (!s3c24xx_serial_has_interrupt_mask(port))
 971                         free_irq(ourport->rx_irq, ourport);
 972                 ourport->rx_claimed = 0;
 973                 rx_enabled(port) = 0;
 974         }
 975
 976         /* Clear pending interrupts and mask all interrupts */
 977         if (s3c24xx_serial_has_interrupt_mask(port)) {
 978                 free_irq(port->irq, ourport);
 979
 980                 wr_regl(port, S3C64XX_UINTP, 0xf);
 981                 wr_regl(port, S3C64XX_UINTM, 0xf);
 982         }
 983
 984         if (ourport->dma)
 985                 s3c24xx_serial_release_dma(ourport);
 986
 987         ourport->tx_in_progress = 0;
 988 }
 989
 990 static int s3c24xx_serial_startup(struct uart_port *port)
 991 {
 992         struct s3c24xx_uart_port *ourport = to_ourport(port);
 993         int ret;
 994
 995         dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n",
 996             port, (unsigned long long)port->mapbase, port->membase);
 997
 998         rx_enabled(port) = 1;
 999
1000         ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
1001                           s3c24xx_serial_portname(port), ourport);
1002
1003         if (ret != 0) {
1004                 dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
1005                 return ret;
1006         }
1007
1008         ourport->rx_claimed = 1;
1009
1010         dbg("requesting tx irq...\n");
1011
1012         tx_enabled(port) = 1;
1013
1014         ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
1015                           s3c24xx_serial_portname(port), ourport);
1016
1017         if (ret) {
1018                 dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
1019                 goto err;
1020         }
1021
1022         ourport->tx_claimed = 1;
1023
1024         dbg("s3c24xx_serial_startup ok\n");
1025
1026         /* the port reset code should have done the correct
1027          * register setup for the port controls */
1028
1029         return ret;
1030
1031 err:
1032         s3c24xx_serial_shutdown(port);
1033         return ret;
1034 }
1035
1036 static int s3c64xx_serial_startup(struct uart_port *port)
1037 {
1038         struct s3c24xx_uart_port *ourport = to_ourport(port);
1039         unsigned long flags;
1040         unsigned int ufcon;
1041         int ret;
1042
1043         dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n",
1044             port, (unsigned long long)port->mapbase, port->membase);
1045
1046         wr_regl(port, S3C64XX_UINTM, 0xf);
1047         if (ourport->dma) {
1048                 ret = s3c24xx_serial_request_dma(ourport);
1049                 if (ret < 0) {
1050                         dev_warn(port->dev, "DMA request failed\n");
1051                         return ret;
1052                 }
1053         }
1054
1055         ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
1056                           s3c24xx_serial_portname(port), ourport);
1057         if (ret) {
1058                 dev_err(port->dev, "cannot get irq %d\n", port->irq);
1059                 return ret;
1060         }
1061
1062         /* For compatibility with s3c24xx Soc's */
1063         rx_enabled(port) = 1;
1064         ourport->rx_claimed = 1;
1065         tx_enabled(port) = 0;
1066         ourport->tx_claimed = 1;
1067
1068         spin_lock_irqsave(&port->lock, flags);
1069
1070         ufcon = rd_regl(port, S3C2410_UFCON);
1071         ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
1072         if (!uart_console(port))
1073                 ufcon |= S3C2410_UFCON_RESETTX;
1074         wr_regl(port, S3C2410_UFCON, ufcon);
1075
1076         enable_rx_pio(ourport);
1077
1078         spin_unlock_irqrestore(&port->lock, flags);
1079
1080         /* Enable Rx Interrupt */
1081         __clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM));
1082
1083         dbg("s3c64xx_serial_startup ok\n");
1084         return ret;
1085 }
1086
1087 /* power power management control */
1088
1089 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
1090                               unsigned int old)
1091 {
1092         struct s3c24xx_uart_port *ourport = to_ourport(port);
1093         int timeout = 10000;
1094
1095         ourport->pm_level = level;
1096
1097         switch (level) {
1098         case 3:
1099                 while (--timeout && !s3c24xx_serial_txempty_nofifo(port))
1100                         udelay(100);
1101
1102                 if (!IS_ERR(ourport->baudclk))
1103                         clk_disable_unprepare(ourport->baudclk);
1104
1105                 clk_disable_unprepare(ourport->clk);
1106                 break;
1107
1108         case 0:
1109                 clk_prepare_enable(ourport->clk);
1110
1111                 if (!IS_ERR(ourport->baudclk))
1112                         clk_prepare_enable(ourport->baudclk);
1113
1114                 break;
1115         default:
1116                 dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
1117         }
1118 }
1119
1120 /* baud rate calculation
1121  *
1122  * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
1123  * of different sources, including the peripheral clock ("pclk") and an
1124  * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
1125  * with a programmable extra divisor.
1126  *
1127  * The following code goes through the clock sources, and calculates the
1128  * baud clocks (and the resultant actual baud rates) and then tries to
1129  * pick the closest one and select that.
1130  *
1131 */
1132
1133 #define MAX_CLK_NAME_LENGTH 15
1134
1135 static inline int s3c24xx_serial_getsource(struct uart_port *port)
1136 {
1137         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1138         unsigned int ucon;
1139
1140         if (info->num_clks == 1)
1141                 return 0;
1142
1143         ucon = rd_regl(port, S3C2410_UCON);
1144         ucon &= info->clksel_mask;
1145         return ucon >> info->clksel_shift;
1146 }
1147
1148 static void s3c24xx_serial_setsource(struct uart_port *port,
1149                         unsigned int clk_sel)
1150 {
1151         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1152         unsigned int ucon;
1153
1154         if (info->num_clks == 1)
1155                 return;
1156
1157         ucon = rd_regl(port, S3C2410_UCON);
1158         if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
1159                 return;
1160
1161         ucon &= ~info->clksel_mask;
1162         ucon |= clk_sel << info->clksel_shift;
1163         wr_regl(port, S3C2410_UCON, ucon);
1164 }
1165
1166 static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
1167                         unsigned int req_baud, struct clk **best_clk,
1168                         unsigned int *clk_num)
1169 {
1170         struct s3c24xx_uart_info *info = ourport->info;
1171         struct clk *clk;
1172         unsigned long rate;
1173         unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
1174         char clkname[MAX_CLK_NAME_LENGTH];
1175         int calc_deviation, deviation = (1 << 30) - 1;
1176
1177         clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
1178                         ourport->info->def_clk_sel;
1179         for (cnt = 0; cnt < info->num_clks; cnt++) {
1180                 if (!(clk_sel & (1 << cnt)))
1181                         continue;
1182
1183                 sprintf(clkname, "clk_uart_baud%d", cnt);
1184                 clk = clk_get(ourport->port.dev, clkname);
1185                 if (IS_ERR(clk))
1186                         continue;
1187
1188                 rate = clk_get_rate(clk);
1189                 if (!rate)
1190                         continue;
1191
1192                 if (ourport->info->has_divslot) {
1193                         unsigned long div = rate / req_baud;
1194
1195                         /* The UDIVSLOT register on the newer UARTs allows us to
1196                          * get a divisor adjustment of 1/16th on the baud clock.
1197                          *
1198                          * We don't keep the UDIVSLOT value (the 16ths we
1199                          * calculated by not multiplying the baud by 16) as it
1200                          * is easy enough to recalculate.
1201                          */
1202
1203                         quot = div / 16;
1204                         baud = rate / div;
1205                 } else {
1206                         quot = (rate + (8 * req_baud)) / (16 * req_baud);
1207                         baud = rate / (quot * 16);
1208                 }
1209                 quot--;
1210
1211                 calc_deviation = req_baud - baud;
1212                 if (calc_deviation < 0)
1213                         calc_deviation = -calc_deviation;
1214
1215                 if (calc_deviation < deviation) {
1216                         *best_clk = clk;
1217                         best_quot = quot;
1218                         *clk_num = cnt;
1219                         deviation = calc_deviation;
1220                 }
1221         }
1222
1223         return best_quot;
1224 }
1225
1226 /* udivslot_table[]
1227  *
1228  * This table takes the fractional value of the baud divisor and gives
1229  * the recommended setting for the UDIVSLOT register.
1230  */
1231 static u16 udivslot_table[16] = {
1232         [0] = 0x0000,
1233         [1] = 0x0080,
1234         [2] = 0x0808,
1235         [3] = 0x0888,
1236         [4] = 0x2222,
1237         [5] = 0x4924,
1238         [6] = 0x4A52,
1239         [7] = 0x54AA,
1240         [8] = 0x5555,
1241         [9] = 0xD555,
1242         [10] = 0xD5D5,
1243         [11] = 0xDDD5,
1244         [12] = 0xDDDD,
1245         [13] = 0xDFDD,
1246         [14] = 0xDFDF,
1247         [15] = 0xFFDF,
1248 };
1249
1250 static void s3c24xx_serial_set_termios(struct uart_port *port,
1251                                        struct ktermios *termios,
1252                                        struct ktermios *old)
1253 {
1254         struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
1255         struct s3c24xx_uart_port *ourport = to_ourport(port);
1256         struct clk *clk = ERR_PTR(-EINVAL);
1257         unsigned long flags;
1258         unsigned int baud, quot, clk_sel = 0;
1259         unsigned int ulcon;
1260         unsigned int umcon;
1261         unsigned int udivslot = 0;
1262
1263         /*
1264          * We don't support modem control lines.
1265          */
1266         termios->c_cflag &= ~(HUPCL | CMSPAR);
1267         termios->c_cflag |= CLOCAL;
1268
1269         /*
1270          * Ask the core to calculate the divisor for us.
1271          */
1272
1273         baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
1274         quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
1275         if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
1276                 quot = port->custom_divisor;
1277         if (IS_ERR(clk))
1278                 return;
1279
1280         /* check to see if we need  to change clock source */
1281
1282         if (ourport->baudclk != clk) {
1283                 s3c24xx_serial_setsource(port, clk_sel);
1284
1285                 if (!IS_ERR(ourport->baudclk)) {
1286                         clk_disable_unprepare(ourport->baudclk);
1287                         ourport->baudclk = ERR_PTR(-EINVAL);
1288                 }
1289
1290                 clk_prepare_enable(clk);
1291
1292                 ourport->baudclk = clk;
1293                 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
1294         }
1295
1296         if (ourport->info->has_divslot) {
1297                 unsigned int div = ourport->baudclk_rate / baud;
1298
1299                 if (cfg->has_fracval) {
1300                         udivslot = (div & 15);
1301                         dbg("fracval = %04x\n", udivslot);
1302                 } else {
1303                         udivslot = udivslot_table[div & 15];
1304                         dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
1305                 }
1306         }
1307
1308         switch (termios->c_cflag & CSIZE) {
1309         case CS5:
1310                 dbg("config: 5bits/char\n");
1311                 ulcon = S3C2410_LCON_CS5;
1312                 break;
1313         case CS6:
1314                 dbg("config: 6bits/char\n");
1315                 ulcon = S3C2410_LCON_CS6;
1316                 break;
1317         case CS7:
1318                 dbg("config: 7bits/char\n");
1319                 ulcon = S3C2410_LCON_CS7;
1320                 break;
1321         case CS8:
1322         default:
1323                 dbg("config: 8bits/char\n");
1324                 ulcon = S3C2410_LCON_CS8;
1325                 break;
1326         }
1327
1328         /* preserve original lcon IR settings */
1329         ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
1330
1331         if (termios->c_cflag & CSTOPB)
1332                 ulcon |= S3C2410_LCON_STOPB;
1333
1334         if (termios->c_cflag & PARENB) {
1335                 if (termios->c_cflag & PARODD)
1336                         ulcon |= S3C2410_LCON_PODD;
1337                 else
1338                         ulcon |= S3C2410_LCON_PEVEN;
1339         } else {
1340                 ulcon |= S3C2410_LCON_PNONE;
1341         }
1342
1343         spin_lock_irqsave(&port->lock, flags);
1344
1345         dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
1346             ulcon, quot, udivslot);
1347
1348         wr_regl(port, S3C2410_ULCON, ulcon);
1349         wr_regl(port, S3C2410_UBRDIV, quot);
1350
1351         umcon = rd_regl(port, S3C2410_UMCON);
1352         if (termios->c_cflag & CRTSCTS) {
1353                 umcon |= S3C2410_UMCOM_AFC;
1354                 /* Disable RTS when RX FIFO contains 63 bytes */
1355                 umcon &= ~S3C2412_UMCON_AFC_8;
1356         } else {
1357                 umcon &= ~S3C2410_UMCOM_AFC;
1358         }
1359         wr_regl(port, S3C2410_UMCON, umcon);
1360
1361         if (ourport->info->has_divslot)
1362                 wr_regl(port, S3C2443_DIVSLOT, udivslot);
1363
1364         dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
1365             rd_regl(port, S3C2410_ULCON),
1366             rd_regl(port, S3C2410_UCON),
1367             rd_regl(port, S3C2410_UFCON));
1368
1369         /*
1370          * Update the per-port timeout.
1371          */
1372         uart_update_timeout(port, termios->c_cflag, baud);
1373
1374         /*
1375          * Which character status flags are we interested in?
1376          */
1377         port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
1378         if (termios->c_iflag & INPCK)
1379                 port->read_status_mask |= S3C2410_UERSTAT_FRAME |
1380                         S3C2410_UERSTAT_PARITY;
1381         /*
1382          * Which character status flags should we ignore?
1383          */
1384         port->ignore_status_mask = 0;
1385         if (termios->c_iflag & IGNPAR)
1386                 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
1387         if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
1388                 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
1389
1390         /*
1391          * Ignore all characters if CREAD is not set.
1392          */
1393         if ((termios->c_cflag & CREAD) == 0)
1394                 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
1395
1396         spin_unlock_irqrestore(&port->lock, flags);
1397 }
1398
1399 static const char *s3c24xx_serial_type(struct uart_port *port)
1400 {
1401         switch (port->type) {
1402         case PORT_S3C2410:
1403                 return "S3C2410";
1404         case PORT_S3C2440:
1405                 return "S3C2440";
1406         case PORT_S3C2412:
1407                 return "S3C2412";
1408         case PORT_S3C6400:
1409                 return "S3C6400/10";
1410         default:
1411                 return NULL;
1412         }
1413 }
1414
1415 #define MAP_SIZE (0x100)
1416
1417 static void s3c24xx_serial_release_port(struct uart_port *port)
1418 {
1419         release_mem_region(port->mapbase, MAP_SIZE);
1420 }
1421
1422 static int s3c24xx_serial_request_port(struct uart_port *port)
1423 {
1424         const char *name = s3c24xx_serial_portname(port);
1425         return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
1426 }
1427
1428 static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
1429 {
1430         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1431
1432         if (flags & UART_CONFIG_TYPE &&
1433             s3c24xx_serial_request_port(port) == 0)
1434                 port->type = info->type;
1435 }
1436
1437 /*
1438  * verify the new serial_struct (for TIOCSSERIAL).
1439  */
1440 static int
1441 s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
1442 {
1443         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1444
1445         if (ser->type != PORT_UNKNOWN && ser->type != info->type)
1446                 return -EINVAL;
1447
1448         return 0;
1449 }
1450
1451
1452 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1453
1454 static struct console s3c24xx_serial_console;
1455
1456 static int __init s3c24xx_serial_console_init(void)
1457 {
1458         register_console(&s3c24xx_serial_console);
1459         return 0;
1460 }
1461 console_initcall(s3c24xx_serial_console_init);
1462
1463 #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
1464 #else
1465 #define S3C24XX_SERIAL_CONSOLE NULL
1466 #endif
1467
1468 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1469 static int s3c24xx_serial_get_poll_char(struct uart_port *port);
1470 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
1471                          unsigned char c);
1472 #endif
1473
1474 static struct uart_ops s3c24xx_serial_ops = {
1475         .pm             = s3c24xx_serial_pm,
1476         .tx_empty       = s3c24xx_serial_tx_empty,
1477         .get_mctrl      = s3c24xx_serial_get_mctrl,
1478         .set_mctrl      = s3c24xx_serial_set_mctrl,
1479         .stop_tx        = s3c24xx_serial_stop_tx,
1480         .start_tx       = s3c24xx_serial_start_tx,
1481         .stop_rx        = s3c24xx_serial_stop_rx,
1482         .break_ctl      = s3c24xx_serial_break_ctl,
1483         .startup        = s3c24xx_serial_startup,
1484         .shutdown       = s3c24xx_serial_shutdown,
1485         .set_termios    = s3c24xx_serial_set_termios,
1486         .type           = s3c24xx_serial_type,
1487         .release_port   = s3c24xx_serial_release_port,
1488         .request_port   = s3c24xx_serial_request_port,
1489         .config_port    = s3c24xx_serial_config_port,
1490         .verify_port    = s3c24xx_serial_verify_port,
1491 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1492         .poll_get_char = s3c24xx_serial_get_poll_char,
1493         .poll_put_char = s3c24xx_serial_put_poll_char,
1494 #endif
1495 };
1496
1497 static struct uart_driver s3c24xx_uart_drv = {
1498         .owner          = THIS_MODULE,
1499         .driver_name    = "s3c2410_serial",
1500         .nr             = CONFIG_SERIAL_SAMSUNG_UARTS,
1501         .cons           = S3C24XX_SERIAL_CONSOLE,
1502         .dev_name       = S3C24XX_SERIAL_NAME,
1503         .major          = S3C24XX_SERIAL_MAJOR,
1504         .minor          = S3C24XX_SERIAL_MINOR,
1505 };
1506
1507 #define __PORT_LOCK_UNLOCKED(i) \
1508         __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock)
1509 static struct s3c24xx_uart_port
1510 s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
1511         [0] = {
1512                 .port = {
1513                         .lock           = __PORT_LOCK_UNLOCKED(0),
1514                         .iotype         = UPIO_MEM,
1515                         .uartclk        = 0,
1516                         .fifosize       = 16,
1517                         .ops            = &s3c24xx_serial_ops,
1518                         .flags          = UPF_BOOT_AUTOCONF,
1519                         .line           = 0,
1520                 }
1521         },
1522         [1] = {
1523                 .port = {
1524                         .lock           = __PORT_LOCK_UNLOCKED(1),
1525                         .iotype         = UPIO_MEM,
1526                         .uartclk        = 0,
1527                         .fifosize       = 16,
1528                         .ops            = &s3c24xx_serial_ops,
1529                         .flags          = UPF_BOOT_AUTOCONF,
1530                         .line           = 1,
1531                 }
1532         },
1533 #if CONFIG_SERIAL_SAMSUNG_UARTS > 2
1534
1535         [2] = {
1536                 .port = {
1537                         .lock           = __PORT_LOCK_UNLOCKED(2),
1538                         .iotype         = UPIO_MEM,
1539                         .uartclk        = 0,
1540                         .fifosize       = 16,
1541                         .ops            = &s3c24xx_serial_ops,
1542                         .flags          = UPF_BOOT_AUTOCONF,
1543                         .line           = 2,
1544                 }
1545         },
1546 #endif
1547 #if CONFIG_SERIAL_SAMSUNG_UARTS > 3
1548         [3] = {
1549                 .port = {
1550                         .lock           = __PORT_LOCK_UNLOCKED(3),
1551                         .iotype         = UPIO_MEM,
1552                         .uartclk        = 0,
1553                         .fifosize       = 16,
1554                         .ops            = &s3c24xx_serial_ops,
1555                         .flags          = UPF_BOOT_AUTOCONF,
1556                         .line           = 3,
1557                 }
1558         }
1559 #endif
1560 };
1561 #undef __PORT_LOCK_UNLOCKED
1562
1563 /* s3c24xx_serial_resetport
1564  *
1565  * reset the fifos and other the settings.
1566 */
1567
1568 static void s3c24xx_serial_resetport(struct uart_port *port,
1569                                    struct s3c2410_uartcfg *cfg)
1570 {
1571         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1572         unsigned long ucon = rd_regl(port, S3C2410_UCON);
1573         unsigned int ucon_mask;
1574
1575         ucon_mask = info->clksel_mask;
1576         if (info->type == PORT_S3C2440)
1577                 ucon_mask |= S3C2440_UCON0_DIVMASK;
1578
1579         ucon &= ucon_mask;
1580         wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
1581
1582         /* reset both fifos */
1583         wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1584         wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1585
1586         /* some delay is required after fifo reset */
1587         udelay(1);
1588 }
1589
1590
1591 #ifdef CONFIG_CPU_FREQ
1592
1593 static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
1594                                              unsigned long val, void *data)
1595 {
1596         struct s3c24xx_uart_port *port;
1597         struct uart_port *uport;
1598
1599         port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
1600         uport = &port->port;
1601
1602         /* check to see if port is enabled */
1603
1604         if (port->pm_level != 0)
1605                 return 0;
1606
1607         /* try and work out if the baudrate is changing, we can detect
1608          * a change in rate, but we do not have support for detecting
1609          * a disturbance in the clock-rate over the change.
1610          */
1611
1612         if (IS_ERR(port->baudclk))
1613                 goto exit;
1614
1615         if (port->baudclk_rate == clk_get_rate(port->baudclk))
1616                 goto exit;
1617
1618         if (val == CPUFREQ_PRECHANGE) {
1619                 /* we should really shut the port down whilst the
1620                  * frequency change is in progress. */
1621
1622         } else if (val == CPUFREQ_POSTCHANGE) {
1623                 struct ktermios *termios;
1624                 struct tty_struct *tty;
1625
1626                 if (uport->state == NULL)
1627                         goto exit;
1628
1629                 tty = uport->state->port.tty;
1630
1631                 if (tty == NULL)
1632                         goto exit;
1633
1634                 termios = &tty->termios;
1635
1636                 if (termios == NULL) {
1637                         dev_warn(uport->dev, "%s: no termios?\n", __func__);
1638                         goto exit;
1639                 }
1640
1641                 s3c24xx_serial_set_termios(uport, termios, NULL);
1642         }
1643
1644 exit:
1645         return 0;
1646 }
1647
1648 static inline int
1649 s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1650 {
1651         port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
1652
1653         return cpufreq_register_notifier(&port->freq_transition,
1654                                          CPUFREQ_TRANSITION_NOTIFIER);
1655 }
1656
1657 static inline void
1658 s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1659 {
1660         cpufreq_unregister_notifier(&port->freq_transition,
1661                                     CPUFREQ_TRANSITION_NOTIFIER);
1662 }
1663
1664 #else
1665 static inline int
1666 s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1667 {
1668         return 0;
1669 }
1670
1671 static inline void
1672 s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1673 {
1674 }
1675 #endif
1676
1677 /* s3c24xx_serial_init_port
1678  *
1679  * initialise a single serial port from the platform device given
1680  */
1681
1682 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
1683                                     struct platform_device *platdev)
1684 {
1685         struct uart_port *port = &ourport->port;
1686         struct s3c2410_uartcfg *cfg = ourport->cfg;
1687         struct resource *res;
1688         int ret;
1689
1690         dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
1691
1692         if (platdev == NULL)
1693                 return -ENODEV;
1694
1695         if (port->mapbase != 0)
1696                 return 0;
1697
1698         /* setup info for port */
1699         port->dev       = &platdev->dev;
1700
1701         /* Startup sequence is different for s3c64xx and higher SoC's */
1702         if (s3c24xx_serial_has_interrupt_mask(port))
1703                 s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
1704
1705         port->uartclk = 1;
1706
1707         if (cfg->uart_flags & UPF_CONS_FLOW) {
1708                 dbg("s3c24xx_serial_init_port: enabling flow control\n");
1709                 port->flags |= UPF_CONS_FLOW;
1710         }
1711
1712         /* sort our the physical and virtual addresses for each UART */
1713
1714         res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
1715         if (res == NULL) {
1716                 dev_err(port->dev, "failed to find memory resource for uart\n");
1717                 return -EINVAL;
1718         }
1719
1720         dbg("resource %pR)\n", res);
1721
1722         port->membase = devm_ioremap(port->dev, res->start, resource_size(res));
1723         if (!port->membase) {
1724                 dev_err(port->dev, "failed to remap controller address\n");
1725                 return -EBUSY;
1726         }
1727
1728         port->mapbase = res->start;
1729         ret = platform_get_irq(platdev, 0);
1730         if (ret < 0)
1731                 port->irq = 0;
1732         else {
1733                 port->irq = ret;
1734                 ourport->rx_irq = ret;
1735                 ourport->tx_irq = ret + 1;
1736         }
1737
1738         ret = platform_get_irq(platdev, 1);
1739         if (ret > 0)
1740                 ourport->tx_irq = ret;
1741         /*
1742          * DMA is currently supported only on DT platforms, if DMA properties
1743          * are specified.
1744          */
1745         if (platdev->dev.of_node && of_find_property(platdev->dev.of_node,
1746                                                      "dmas", NULL)) {
1747                 ourport->dma = devm_kzalloc(port->dev,
1748                                             sizeof(*ourport->dma),
1749                                             GFP_KERNEL);
1750                 if (!ourport->dma)
1751                         return -ENOMEM;
1752         }
1753
1754         ourport->clk    = clk_get(&platdev->dev, "uart");
1755         if (IS_ERR(ourport->clk)) {
1756                 pr_err("%s: Controller clock not found\n",
1757                                 dev_name(&platdev->dev));
1758                 return PTR_ERR(ourport->clk);
1759         }
1760
1761         ret = clk_prepare_enable(ourport->clk);
1762         if (ret) {
1763                 pr_err("uart: clock failed to prepare+enable: %d\n", ret);
1764                 clk_put(ourport->clk);
1765                 return ret;
1766         }
1767
1768         /* Keep all interrupts masked and cleared */
1769         if (s3c24xx_serial_has_interrupt_mask(port)) {
1770                 wr_regl(port, S3C64XX_UINTM, 0xf);
1771                 wr_regl(port, S3C64XX_UINTP, 0xf);
1772                 wr_regl(port, S3C64XX_UINTSP, 0xf);
1773         }
1774
1775         dbg("port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
1776             &port->mapbase, port->membase, port->irq,
1777             ourport->rx_irq, ourport->tx_irq, port->uartclk);
1778
1779         /* reset the fifos (and setup the uart) */
1780         s3c24xx_serial_resetport(port, cfg);
1781         return 0;
1782 }
1783
1784 /* Device driver serial port probe */
1785
1786 static const struct of_device_id s3c24xx_uart_dt_match[];
1787 static int probe_index;
1788
1789 static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
1790                         struct platform_device *pdev)
1791 {
1792 #ifdef CONFIG_OF
1793         if (pdev->dev.of_node) {
1794                 const struct of_device_id *match;
1795                 match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
1796                 return (struct s3c24xx_serial_drv_data *)match->data;
1797         }
1798 #endif
1799         return (struct s3c24xx_serial_drv_data *)
1800                         platform_get_device_id(pdev)->driver_data;
1801 }
1802
1803 static int s3c24xx_serial_probe(struct platform_device *pdev)
1804 {
1805         struct device_node *np = pdev->dev.of_node;
1806         struct s3c24xx_uart_port *ourport;
1807         int index = probe_index;
1808         int ret;
1809
1810         if (np) {
1811                 ret = of_alias_get_id(np, "serial");
1812                 if (ret >= 0)
1813                         index = ret;
1814         }
1815
1816         dbg("s3c24xx_serial_probe(%p) %d\n", pdev, index);
1817
1818         ourport = &s3c24xx_serial_ports[index];
1819
1820         ourport->drv_data = s3c24xx_get_driver_data(pdev);
1821         if (!ourport->drv_data) {
1822                 dev_err(&pdev->dev, "could not find driver data\n");
1823                 return -ENODEV;
1824         }
1825
1826         ourport->baudclk = ERR_PTR(-EINVAL);
1827         ourport->info = ourport->drv_data->info;
1828         ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
1829                         dev_get_platdata(&pdev->dev) :
1830                         ourport->drv_data->def_cfg;
1831
1832         if (np)
1833                 of_property_read_u32(np,
1834                         "samsung,uart-fifosize", &ourport->port.fifosize);
1835
1836         if (ourport->drv_data->fifosize[index])
1837                 ourport->port.fifosize = ourport->drv_data->fifosize[index];
1838         else if (ourport->info->fifosize)
1839                 ourport->port.fifosize = ourport->info->fifosize;
1840
1841         probe_index++;
1842
1843         dbg("%s: initialising port %p...\n", __func__, ourport);
1844
1845         ret = s3c24xx_serial_init_port(ourport, pdev);
1846         if (ret < 0)
1847                 return ret;
1848
1849         if (!s3c24xx_uart_drv.state) {
1850                 ret = uart_register_driver(&s3c24xx_uart_drv);
1851                 if (ret < 0) {
1852                         pr_err("Failed to register Samsung UART driver\n");
1853                         return ret;
1854                 }
1855         }
1856
1857         dbg("%s: adding port\n", __func__);
1858         uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
1859         platform_set_drvdata(pdev, &ourport->port);
1860
1861         /*
1862          * Deactivate the clock enabled in s3c24xx_serial_init_port here,
1863          * so that a potential re-enablement through the pm-callback overlaps
1864          * and keeps the clock enabled in this case.
1865          */
1866         clk_disable_unprepare(ourport->clk);
1867
1868         ret = s3c24xx_serial_cpufreq_register(ourport);
1869         if (ret < 0)
1870                 dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
1871
1872         return 0;
1873 }
1874
1875 static int s3c24xx_serial_remove(struct platform_device *dev)
1876 {
1877         struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
1878
1879         if (port) {
1880                 s3c24xx_serial_cpufreq_deregister(to_ourport(port));
1881                 uart_remove_one_port(&s3c24xx_uart_drv, port);
1882         }
1883
1884         uart_unregister_driver(&s3c24xx_uart_drv);
1885
1886         return 0;
1887 }
1888
1889 /* UART power management code */
1890 #ifdef CONFIG_PM_SLEEP
1891 static int s3c24xx_serial_suspend(struct device *dev)
1892 {
1893         struct uart_port *port = s3c24xx_dev_to_port(dev);
1894
1895         if (port)
1896                 uart_suspend_port(&s3c24xx_uart_drv, port);
1897
1898         return 0;
1899 }
1900
1901 static int s3c24xx_serial_resume(struct device *dev)
1902 {
1903         struct uart_port *port = s3c24xx_dev_to_port(dev);
1904         struct s3c24xx_uart_port *ourport = to_ourport(port);
1905
1906         if (port) {
1907                 clk_prepare_enable(ourport->clk);
1908                 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
1909                 clk_disable_unprepare(ourport->clk);
1910
1911                 uart_resume_port(&s3c24xx_uart_drv, port);
1912         }
1913
1914         return 0;
1915 }
1916
1917 static int s3c24xx_serial_resume_noirq(struct device *dev)
1918 {
1919         struct uart_port *port = s3c24xx_dev_to_port(dev);
1920
1921         if (port) {
1922                 /* restore IRQ mask */
1923                 if (s3c24xx_serial_has_interrupt_mask(port)) {
1924                         unsigned int uintm = 0xf;
1925                         if (tx_enabled(port))
1926                                 uintm &= ~S3C64XX_UINTM_TXD_MSK;
1927                         if (rx_enabled(port))
1928                                 uintm &= ~S3C64XX_UINTM_RXD_MSK;
1929                         wr_regl(port, S3C64XX_UINTM, uintm);
1930                 }
1931         }
1932
1933         return 0;
1934 }
1935
1936 static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
1937         .suspend = s3c24xx_serial_suspend,
1938         .resume = s3c24xx_serial_resume,
1939         .resume_noirq = s3c24xx_serial_resume_noirq,
1940 };
1941 #define SERIAL_SAMSUNG_PM_OPS   (&s3c24xx_serial_pm_ops)
1942
1943 #else /* !CONFIG_PM_SLEEP */
1944
1945 #define SERIAL_SAMSUNG_PM_OPS   NULL
1946 #endif /* CONFIG_PM_SLEEP */
1947
1948 /* Console code */
1949
1950 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1951
1952 static struct uart_port *cons_uart;
1953
1954 static int
1955 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
1956 {
1957         struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1958         unsigned long ufstat, utrstat;
1959
1960         if (ufcon & S3C2410_UFCON_FIFOMODE) {
1961                 /* fifo mode - check amount of data in fifo registers... */
1962
1963                 ufstat = rd_regl(port, S3C2410_UFSTAT);
1964                 return (ufstat & info->tx_fifofull) ? 0 : 1;
1965         }
1966
1967         /* in non-fifo mode, we go and use the tx buffer empty */
1968
1969         utrstat = rd_regl(port, S3C2410_UTRSTAT);
1970         return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
1971 }
1972
1973 static bool
1974 s3c24xx_port_configured(unsigned int ucon)
1975 {
1976         /* consider the serial port configured if the tx/rx mode set */
1977         return (ucon & 0xf) != 0;
1978 }
1979
1980 #ifdef CONFIG_CONSOLE_POLL
1981 /*
1982  * Console polling routines for writing and reading from the uart while
1983  * in an interrupt or debug context.
1984  */
1985
1986 static int s3c24xx_serial_get_poll_char(struct uart_port *port)
1987 {
1988         struct s3c24xx_uart_port *ourport = to_ourport(port);
1989         unsigned int ufstat;
1990
1991         ufstat = rd_regl(port, S3C2410_UFSTAT);
1992         if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
1993                 return NO_POLL_CHAR;
1994
1995         return rd_regb(port, S3C2410_URXH);
1996 }
1997
1998 static void s3c24xx_serial_put_poll_char(struct uart_port *port,
1999                 unsigned char c)
2000 {
2001         unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
2002         unsigned int ucon = rd_regl(port, S3C2410_UCON);
2003
2004         /* not possible to xmit on unconfigured port */
2005         if (!s3c24xx_port_configured(ucon))
2006                 return;
2007
2008         while (!s3c24xx_serial_console_txrdy(port, ufcon))
2009                 cpu_relax();
2010         wr_regb(port, S3C2410_UTXH, c);
2011 }
2012
2013 #endif /* CONFIG_CONSOLE_POLL */
2014
2015 static void
2016 s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
2017 {
2018         unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
2019
2020         while (!s3c24xx_serial_console_txrdy(port, ufcon))
2021                 cpu_relax();
2022         wr_regb(port, S3C2410_UTXH, ch);
2023 }
2024
2025 static void
2026 s3c24xx_serial_console_write(struct console *co, const char *s,
2027                              unsigned int count)
2028 {
2029         unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
2030
2031         /* not possible to xmit on unconfigured port */
2032         if (!s3c24xx_port_configured(ucon))
2033                 return;
2034
2035         uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
2036 }
2037
2038 static void __init
2039 s3c24xx_serial_get_options(struct uart_port *port, int *baud,
2040                            int *parity, int *bits)
2041 {
2042         struct clk *clk;
2043         unsigned int ulcon;
2044         unsigned int ucon;
2045         unsigned int ubrdiv;
2046         unsigned long rate;
2047         unsigned int clk_sel;
2048         char clk_name[MAX_CLK_NAME_LENGTH];
2049
2050         ulcon  = rd_regl(port, S3C2410_ULCON);
2051         ucon   = rd_regl(port, S3C2410_UCON);
2052         ubrdiv = rd_regl(port, S3C2410_UBRDIV);
2053
2054         dbg("s3c24xx_serial_get_options: port=%p\n"
2055             "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
2056             port, ulcon, ucon, ubrdiv);
2057
2058         if (s3c24xx_port_configured(ucon)) {
2059                 switch (ulcon & S3C2410_LCON_CSMASK) {
2060                 case S3C2410_LCON_CS5:
2061                         *bits = 5;
2062                         break;
2063                 case S3C2410_LCON_CS6:
2064                         *bits = 6;
2065                         break;
2066                 case S3C2410_LCON_CS7:
2067                         *bits = 7;
2068                         break;
2069                 case S3C2410_LCON_CS8:
2070                 default:
2071                         *bits = 8;
2072                         break;
2073                 }
2074
2075                 switch (ulcon & S3C2410_LCON_PMASK) {
2076                 case S3C2410_LCON_PEVEN:
2077                         *parity = 'e';
2078                         break;
2079
2080                 case S3C2410_LCON_PODD:
2081                         *parity = 'o';
2082                         break;
2083
2084                 case S3C2410_LCON_PNONE:
2085                 default:
2086                         *parity = 'n';
2087                 }
2088
2089                 /* now calculate the baud rate */
2090
2091                 clk_sel = s3c24xx_serial_getsource(port);
2092                 sprintf(clk_name, "clk_uart_baud%d", clk_sel);
2093
2094                 clk = clk_get(port->dev, clk_name);
2095                 if (!IS_ERR(clk))
2096                         rate = clk_get_rate(clk);
2097                 else
2098                         rate = 1;
2099
2100                 *baud = rate / (16 * (ubrdiv + 1));
2101                 dbg("calculated baud %d\n", *baud);
2102         }
2103
2104 }
2105
2106 static int __init
2107 s3c24xx_serial_console_setup(struct console *co, char *options)
2108 {
2109         struct uart_port *port;
2110         int baud = 9600;
2111         int bits = 8;
2112         int parity = 'n';
2113         int flow = 'n';
2114
2115         dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
2116             co, co->index, options);
2117
2118         /* is this a valid port */
2119
2120         if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
2121                 co->index = 0;
2122
2123         port = &s3c24xx_serial_ports[co->index].port;
2124
2125         /* is the port configured? */
2126
2127         if (port->mapbase == 0x0)
2128                 return -ENODEV;
2129
2130         cons_uart = port;
2131
2132         dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
2133
2134         /*
2135          * Check whether an invalid uart number has been specified, and
2136          * if so, search for the first available port that does have
2137          * console support.
2138          */
2139         if (options)
2140                 uart_parse_options(options, &baud, &parity, &bits, &flow);
2141         else
2142                 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
2143
2144         dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
2145
2146         return uart_set_options(port, co, baud, parity, bits, flow);
2147 }
2148
2149 static struct console s3c24xx_serial_console = {
2150         .name           = S3C24XX_SERIAL_NAME,
2151         .device         = uart_console_device,
2152         .flags          = CON_PRINTBUFFER,
2153         .index          = -1,
2154         .write          = s3c24xx_serial_console_write,
2155         .setup          = s3c24xx_serial_console_setup,
2156         .data           = &s3c24xx_uart_drv,
2157 };
2158 #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
2159
2160 #ifdef CONFIG_CPU_S3C2410
2161 static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
2162         .info = &(struct s3c24xx_uart_info) {
2163                 .name           = "Samsung S3C2410 UART",
2164                 .type           = PORT_S3C2410,
2165                 .fifosize       = 16,
2166                 .rx_fifomask    = S3C2410_UFSTAT_RXMASK,
2167                 .rx_fifoshift   = S3C2410_UFSTAT_RXSHIFT,
2168                 .rx_fifofull    = S3C2410_UFSTAT_RXFULL,
2169                 .tx_fifofull    = S3C2410_UFSTAT_TXFULL,
2170                 .tx_fifomask    = S3C2410_UFSTAT_TXMASK,
2171                 .tx_fifoshift   = S3C2410_UFSTAT_TXSHIFT,
2172                 .def_clk_sel    = S3C2410_UCON_CLKSEL0,
2173                 .num_clks       = 2,
2174                 .clksel_mask    = S3C2410_UCON_CLKMASK,
2175                 .clksel_shift   = S3C2410_UCON_CLKSHIFT,
2176         },
2177         .def_cfg = &(struct s3c2410_uartcfg) {
2178                 .ucon           = S3C2410_UCON_DEFAULT,
2179                 .ufcon          = S3C2410_UFCON_DEFAULT,
2180         },
2181 };
2182 #define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
2183 #else
2184 #define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2185 #endif
2186
2187 #ifdef CONFIG_CPU_S3C2412
2188 static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
2189         .info = &(struct s3c24xx_uart_info) {
2190                 .name           = "Samsung S3C2412 UART",
2191                 .type           = PORT_S3C2412,
2192                 .fifosize       = 64,
2193                 .has_divslot    = 1,
2194                 .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
2195                 .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
2196                 .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
2197                 .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
2198                 .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
2199                 .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
2200                 .def_clk_sel    = S3C2410_UCON_CLKSEL2,
2201                 .num_clks       = 4,
2202                 .clksel_mask    = S3C2412_UCON_CLKMASK,
2203                 .clksel_shift   = S3C2412_UCON_CLKSHIFT,
2204         },
2205         .def_cfg = &(struct s3c2410_uartcfg) {
2206                 .ucon           = S3C2410_UCON_DEFAULT,
2207                 .ufcon          = S3C2410_UFCON_DEFAULT,
2208         },
2209 };
2210 #define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
2211 #else
2212 #define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2213 #endif
2214
2215 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
2216         defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
2217 static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
2218         .info = &(struct s3c24xx_uart_info) {
2219                 .name           = "Samsung S3C2440 UART",
2220                 .type           = PORT_S3C2440,
2221                 .fifosize       = 64,
2222                 .has_divslot    = 1,
2223                 .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
2224                 .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
2225                 .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
2226                 .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
2227                 .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
2228                 .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
2229                 .def_clk_sel    = S3C2410_UCON_CLKSEL2,
2230                 .num_clks       = 4,
2231                 .clksel_mask    = S3C2412_UCON_CLKMASK,
2232                 .clksel_shift   = S3C2412_UCON_CLKSHIFT,
2233         },
2234         .def_cfg = &(struct s3c2410_uartcfg) {
2235                 .ucon           = S3C2410_UCON_DEFAULT,
2236                 .ufcon          = S3C2410_UFCON_DEFAULT,
2237         },
2238 };
2239 #define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
2240 #else
2241 #define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2242 #endif
2243
2244 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
2245 static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
2246         .info = &(struct s3c24xx_uart_info) {
2247                 .name           = "Samsung S3C6400 UART",
2248                 .type           = PORT_S3C6400,
2249                 .fifosize       = 64,
2250                 .has_divslot    = 1,
2251                 .rx_fifomask    = S3C2440_UFSTAT_RXMASK,
2252                 .rx_fifoshift   = S3C2440_UFSTAT_RXSHIFT,
2253                 .rx_fifofull    = S3C2440_UFSTAT_RXFULL,
2254                 .tx_fifofull    = S3C2440_UFSTAT_TXFULL,
2255                 .tx_fifomask    = S3C2440_UFSTAT_TXMASK,
2256                 .tx_fifoshift   = S3C2440_UFSTAT_TXSHIFT,
2257                 .def_clk_sel    = S3C2410_UCON_CLKSEL2,
2258                 .num_clks       = 4,
2259                 .clksel_mask    = S3C6400_UCON_CLKMASK,
2260                 .clksel_shift   = S3C6400_UCON_CLKSHIFT,
2261         },
2262         .def_cfg = &(struct s3c2410_uartcfg) {
2263                 .ucon           = S3C2410_UCON_DEFAULT,
2264                 .ufcon          = S3C2410_UFCON_DEFAULT,
2265         },
2266 };
2267 #define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
2268 #else
2269 #define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2270 #endif
2271
2272 #ifdef CONFIG_CPU_S5PV210
2273 static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
2274         .info = &(struct s3c24xx_uart_info) {
2275                 .name           = "Samsung S5PV210 UART",
2276                 .type           = PORT_S3C6400,
2277                 .has_divslot    = 1,
2278                 .rx_fifomask    = S5PV210_UFSTAT_RXMASK,
2279                 .rx_fifoshift   = S5PV210_UFSTAT_RXSHIFT,
2280                 .rx_fifofull    = S5PV210_UFSTAT_RXFULL,
2281                 .tx_fifofull    = S5PV210_UFSTAT_TXFULL,
2282                 .tx_fifomask    = S5PV210_UFSTAT_TXMASK,
2283                 .tx_fifoshift   = S5PV210_UFSTAT_TXSHIFT,
2284                 .def_clk_sel    = S3C2410_UCON_CLKSEL0,
2285                 .num_clks       = 2,
2286                 .clksel_mask    = S5PV210_UCON_CLKMASK,
2287                 .clksel_shift   = S5PV210_UCON_CLKSHIFT,
2288         },
2289         .def_cfg = &(struct s3c2410_uartcfg) {
2290                 .ucon           = S5PV210_UCON_DEFAULT,
2291                 .ufcon          = S5PV210_UFCON_DEFAULT,
2292         },
2293         .fifosize = { 256, 64, 16, 16 },
2294 };
2295 #define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
2296 #else
2297 #define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2298 #endif
2299
2300 #if defined(CONFIG_ARCH_EXYNOS)
2301 #define EXYNOS_COMMON_SERIAL_DRV_DATA                           \
2302         .info = &(struct s3c24xx_uart_info) {                   \
2303                 .name           = "Samsung Exynos UART",        \
2304                 .type           = PORT_S3C6400,                 \
2305                 .has_divslot    = 1,                            \
2306                 .rx_fifomask    = S5PV210_UFSTAT_RXMASK,        \
2307                 .rx_fifoshift   = S5PV210_UFSTAT_RXSHIFT,       \
2308                 .rx_fifofull    = S5PV210_UFSTAT_RXFULL,        \
2309                 .tx_fifofull    = S5PV210_UFSTAT_TXFULL,        \
2310                 .tx_fifomask    = S5PV210_UFSTAT_TXMASK,        \
2311                 .tx_fifoshift   = S5PV210_UFSTAT_TXSHIFT,       \
2312                 .def_clk_sel    = S3C2410_UCON_CLKSEL0,         \
2313                 .num_clks       = 1,                            \
2314                 .clksel_mask    = 0,                            \
2315                 .clksel_shift   = 0,                            \
2316         },                                                      \
2317         .def_cfg = &(struct s3c2410_uartcfg) {                  \
2318                 .ucon           = S5PV210_UCON_DEFAULT,         \
2319                 .ufcon          = S5PV210_UFCON_DEFAULT,        \
2320                 .has_fracval    = 1,                            \
2321         }                                                       \
2322
2323 static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
2324         EXYNOS_COMMON_SERIAL_DRV_DATA,
2325         .fifosize = { 256, 64, 16, 16 },
2326 };
2327
2328 static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
2329         EXYNOS_COMMON_SERIAL_DRV_DATA,
2330         .fifosize = { 64, 256, 16, 256 },
2331 };
2332
2333 #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
2334 #define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
2335 #else
2336 #define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2337 #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2338 #endif
2339
2340 static struct platform_device_id s3c24xx_serial_driver_ids[] = {
2341         {
2342                 .name           = "s3c2410-uart",
2343                 .driver_data    = S3C2410_SERIAL_DRV_DATA,
2344         }, {
2345                 .name           = "s3c2412-uart",
2346                 .driver_data    = S3C2412_SERIAL_DRV_DATA,
2347         }, {
2348                 .name           = "s3c2440-uart",
2349                 .driver_data    = S3C2440_SERIAL_DRV_DATA,
2350         }, {
2351                 .name           = "s3c6400-uart",
2352                 .driver_data    = S3C6400_SERIAL_DRV_DATA,
2353         }, {
2354                 .name           = "s5pv210-uart",
2355                 .driver_data    = S5PV210_SERIAL_DRV_DATA,
2356         }, {
2357                 .name           = "exynos4210-uart",
2358                 .driver_data    = EXYNOS4210_SERIAL_DRV_DATA,
2359         }, {
2360                 .name           = "exynos5433-uart",
2361                 .driver_data    = EXYNOS5433_SERIAL_DRV_DATA,
2362         },
2363         { },
2364 };
2365 MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
2366
2367 #ifdef CONFIG_OF
2368 static const struct of_device_id s3c24xx_uart_dt_match[] = {
2369         { .compatible = "samsung,s3c2410-uart",
2370                 .data = (void *)S3C2410_SERIAL_DRV_DATA },
2371         { .compatible = "samsung,s3c2412-uart",
2372                 .data = (void *)S3C2412_SERIAL_DRV_DATA },
2373         { .compatible = "samsung,s3c2440-uart",
2374                 .data = (void *)S3C2440_SERIAL_DRV_DATA },
2375         { .compatible = "samsung,s3c6400-uart",
2376                 .data = (void *)S3C6400_SERIAL_DRV_DATA },
2377         { .compatible = "samsung,s5pv210-uart",
2378                 .data = (void *)S5PV210_SERIAL_DRV_DATA },
2379         { .compatible = "samsung,exynos4210-uart",
2380                 .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
2381         { .compatible = "samsung,exynos5433-uart",
2382                 .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
2383         {},
2384 };
2385 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
2386 #endif
2387
2388 static struct platform_driver samsung_serial_driver = {
2389         .probe          = s3c24xx_serial_probe,
2390         .remove         = s3c24xx_serial_remove,
2391         .id_table       = s3c24xx_serial_driver_ids,
2392         .driver         = {
2393                 .name   = "samsung-uart",
2394                 .pm     = SERIAL_SAMSUNG_PM_OPS,
2395                 .of_match_table = of_match_ptr(s3c24xx_uart_dt_match),
2396         },
2397 };
2398
2399 module_platform_driver(samsung_serial_driver);
2400
2401 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
2402 /*
2403  * Early console.
2404  */
2405
2406 struct samsung_early_console_data {
2407         u32 txfull_mask;
2408 };
2409
2410 static void samsung_early_busyuart(struct uart_port *port)
2411 {
2412         while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE))
2413                 ;
2414 }
2415
2416 static void samsung_early_busyuart_fifo(struct uart_port *port)
2417 {
2418         struct samsung_early_console_data *data = port->private_data;
2419
2420         while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask)
2421                 ;
2422 }
2423
2424 static void samsung_early_putc(struct uart_port *port, int c)
2425 {
2426         if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE)
2427                 samsung_early_busyuart_fifo(port);
2428         else
2429                 samsung_early_busyuart(port);
2430
2431         writeb(c, port->membase + S3C2410_UTXH);
2432 }
2433
2434 static void samsung_early_write(struct console *con, const char *s, unsigned n)
2435 {
2436         struct earlycon_device *dev = con->data;
2437
2438         uart_console_write(&dev->port, s, n, samsung_early_putc);
2439 }
2440
2441 static int __init samsung_early_console_setup(struct earlycon_device *device,
2442                                               const char *opt)
2443 {
2444         if (!device->port.membase)
2445                 return -ENODEV;
2446
2447         device->con->write = samsung_early_write;
2448         return 0;
2449 }
2450
2451 /* S3C2410 */
2452 static struct samsung_early_console_data s3c2410_early_console_data = {
2453         .txfull_mask = S3C2410_UFSTAT_TXFULL,
2454 };
2455
2456 static int __init s3c2410_early_console_setup(struct earlycon_device *device,
2457                                               const char *opt)
2458 {
2459         device->port.private_data = &s3c2410_early_console_data;
2460         return samsung_early_console_setup(device, opt);
2461 }
2462 OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
2463                         s3c2410_early_console_setup);
2464 EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup);
2465
2466 /* S3C2412, S3C2440, S3C64xx */
2467 static struct samsung_early_console_data s3c2440_early_console_data = {
2468         .txfull_mask = S3C2440_UFSTAT_TXFULL,
2469 };
2470
2471 static int __init s3c2440_early_console_setup(struct earlycon_device *device,
2472                                               const char *opt)
2473 {
2474         device->port.private_data = &s3c2440_early_console_data;
2475         return samsung_early_console_setup(device, opt);
2476 }
2477 OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart",
2478                         s3c2440_early_console_setup);
2479 OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
2480                         s3c2440_early_console_setup);
2481 OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
2482                         s3c2440_early_console_setup);
2483 EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup);
2484 EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup);
2485 EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup);
2486
2487 /* S5PV210, EXYNOS */
2488 static struct samsung_early_console_data s5pv210_early_console_data = {
2489         .txfull_mask = S5PV210_UFSTAT_TXFULL,
2490 };
2491
2492 static int __init s5pv210_early_console_setup(struct earlycon_device *device,
2493                                               const char *opt)
2494 {
2495         device->port.private_data = &s5pv210_early_console_data;
2496         return samsung_early_console_setup(device, opt);
2497 }
2498 OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
2499                         s5pv210_early_console_setup);
2500 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
2501                         s5pv210_early_console_setup);
2502 EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup);
2503 EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup);
2504 #endif
2505
2506 MODULE_ALIAS("platform:samsung-uart");
2507 MODULE_DESCRIPTION("Samsung SoC Serial port driver");
2508 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
2509 MODULE_LICENSE("GPL v2");