Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / tty / serial / cpm_uart / cpm_uart.h
1 /*
2  *  Driver for CPM (SCC/SMC) serial ports
3  *
4  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
5  *
6  *  2006 (c) MontaVista Software, Inc.
7  *      Vitaly Bordug <vbordug@ru.mvista.com>
8  *
9  * This file is licensed under the terms of the GNU General Public License
10  * version 2. This program is licensed "as is" without any warranty of any
11  * kind, whether express or implied.
12  *
13  */
14 #ifndef CPM_UART_H
15 #define CPM_UART_H
16
17 #include <linux/platform_device.h>
18 #include <linux/fs_uart_pd.h>
19
20 #if defined(CONFIG_CPM2)
21 #include "cpm_uart_cpm2.h"
22 #elif defined(CONFIG_CPM1)
23 #include "cpm_uart_cpm1.h"
24 #endif
25
26 #define SERIAL_CPM_MAJOR        204
27 #define SERIAL_CPM_MINOR        46
28
29 #define IS_SMC(pinfo)           (pinfo->flags & FLAG_SMC)
30 #define IS_DISCARDING(pinfo)    (pinfo->flags & FLAG_DISCARDING)
31 #define FLAG_DISCARDING 0x00000004      /* when set, don't discard */
32 #define FLAG_SMC        0x00000002
33 #define FLAG_CONSOLE    0x00000001
34
35 #define UART_SMC1       fsid_smc1_uart
36 #define UART_SMC2       fsid_smc2_uart
37 #define UART_SCC1       fsid_scc1_uart
38 #define UART_SCC2       fsid_scc2_uart
39 #define UART_SCC3       fsid_scc3_uart
40 #define UART_SCC4       fsid_scc4_uart
41
42 #define UART_NR         fs_uart_nr
43
44 #define RX_NUM_FIFO     4
45 #define RX_BUF_SIZE     32
46 #define TX_NUM_FIFO     4
47 #define TX_BUF_SIZE     32
48
49 #define SCC_WAIT_CLOSING 100
50
51 #define GPIO_CTS        0
52 #define GPIO_RTS        1
53 #define GPIO_DCD        2
54 #define GPIO_DSR        3
55 #define GPIO_DTR        4
56 #define GPIO_RI         5
57
58 #define NUM_GPIOS       (GPIO_RI+1)
59
60 struct uart_cpm_port {
61         struct uart_port        port;
62         u16                     rx_nrfifos;
63         u16                     rx_fifosize;
64         u16                     tx_nrfifos;
65         u16                     tx_fifosize;
66         smc_t __iomem           *smcp;
67         smc_uart_t __iomem      *smcup;
68         scc_t __iomem           *sccp;
69         scc_uart_t __iomem      *sccup;
70         cbd_t __iomem           *rx_bd_base;
71         cbd_t __iomem           *rx_cur;
72         cbd_t __iomem           *tx_bd_base;
73         cbd_t __iomem           *tx_cur;
74         unsigned char           *tx_buf;
75         unsigned char           *rx_buf;
76         u32                     flags;
77         struct clk              *clk;
78         u8                      brg;
79         uint                     dp_addr;
80         void                    *mem_addr;
81         dma_addr_t               dma_addr;
82         u32                     mem_size;
83         /* wait on close if needed */
84         int                     wait_closing;
85         /* value to combine with opcode to form cpm command */
86         u32                     command;
87         int                     gpios[NUM_GPIOS];
88 };
89
90 extern int cpm_uart_nr;
91 extern struct uart_cpm_port cpm_uart_ports[UART_NR];
92
93 /* these are located in their respective files */
94 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
95 void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
96                                 struct device_node *np);
97 void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
98 int cpm_uart_init_portdesc(void);
99 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
100 void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
101
102 void smc1_lineif(struct uart_cpm_port *pinfo);
103 void smc2_lineif(struct uart_cpm_port *pinfo);
104 void scc1_lineif(struct uart_cpm_port *pinfo);
105 void scc2_lineif(struct uart_cpm_port *pinfo);
106 void scc3_lineif(struct uart_cpm_port *pinfo);
107 void scc4_lineif(struct uart_cpm_port *pinfo);
108
109 /*
110    virtual to phys transtalion
111 */
112 static inline unsigned long cpu2cpm_addr(void *addr,
113                                          struct uart_cpm_port *pinfo)
114 {
115         int offset;
116         u32 val = (u32)addr;
117         u32 mem = (u32)pinfo->mem_addr;
118         /* sane check */
119         if (likely(val >= mem && val < mem + pinfo->mem_size)) {
120                 offset = val - mem;
121                 return pinfo->dma_addr + offset;
122         }
123         /* something nasty happened */
124         BUG();
125         return 0;
126 }
127
128 static inline void *cpm2cpu_addr(unsigned long addr,
129                                  struct uart_cpm_port *pinfo)
130 {
131         int offset;
132         u32 val = addr;
133         u32 dma = (u32)pinfo->dma_addr;
134         /* sane check */
135         if (likely(val >= dma && val < dma + pinfo->mem_size)) {
136                 offset = val - dma;
137                 return pinfo->mem_addr + offset;
138         }
139         /* something nasty happened */
140         BUG();
141         return NULL;
142 }
143
144
145 #endif /* CPM_UART_H */