Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / thermal / ti-soc-thermal / omap4xxx-bandgap.h
1 /*
2  * OMAP4xxx bandgap registers, bitfields and temperature definitions
3  *
4  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
5  * Contact:
6  *   Eduardo Valentin <eduardo.valentin@ti.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  *
22  */
23 #ifndef __OMAP4XXX_BANDGAP_H
24 #define __OMAP4XXX_BANDGAP_H
25
26 /**
27  * *** OMAP4430 ***
28  *
29  * Below, in sequence, are the Register definitions,
30  * the bitfields and the temperature definitions for OMAP4430.
31  */
32
33 /**
34  * OMAP4430 register definitions
35  *
36  * Registers are defined as offsets. The offsets are
37  * relative to FUSE_OPP_BGAP on 4430.
38  */
39
40 /* OMAP4430.FUSE_OPP_BGAP */
41 #define OMAP4430_FUSE_OPP_BGAP                          0x0
42
43 /* OMAP4430.TEMP_SENSOR  */
44 #define OMAP4430_TEMP_SENSOR_CTRL_OFFSET                0xCC
45
46 /**
47  * Register and bit definitions for OMAP4430
48  *
49  * All the macros bellow define the required bits for
50  * controlling temperature on OMAP4430. Bit defines are
51  * grouped by register.
52  */
53
54 /* OMAP4430.TEMP_SENSOR bits */
55 #define OMAP4430_BGAP_TEMPSOFF_MASK                     BIT(12)
56 #define OMAP4430_BGAP_TSHUT_MASK                        BIT(11)
57 #define OMAP4430_SINGLE_MODE_MASK                       BIT(10)
58 #define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK              BIT(9)
59 #define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK             BIT(8)
60 #define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK            (0xff << 0)
61
62 /**
63  * Temperature limits and thresholds for OMAP4430
64  *
65  * All the macros bellow are definitions for handling the
66  * ADC conversions and representation of temperature limits
67  * and thresholds for OMAP4430.
68  */
69
70 /* ADC conversion table limits */
71 #define OMAP4430_ADC_START_VALUE                        0
72 #define OMAP4430_ADC_END_VALUE                          127
73 /* bandgap clock limits (no control on 4430) */
74 #define OMAP4430_MAX_FREQ                               32768
75 #define OMAP4430_MIN_FREQ                               32768
76 /* sensor limits */
77 #define OMAP4430_MIN_TEMP                               -40000
78 #define OMAP4430_MAX_TEMP                               125000
79 #define OMAP4430_HYST_VAL                               5000
80
81 /**
82  * *** OMAP4460 *** Applicable for OMAP4470
83  *
84  * Below, in sequence, are the Register definitions,
85  * the bitfields and the temperature definitions for OMAP4460.
86  */
87
88 /**
89  * OMAP4460 register definitions
90  *
91  * Registers are defined as offsets. The offsets are
92  * relative to FUSE_OPP_BGAP on 4460.
93  */
94
95 /* OMAP4460.FUSE_OPP_BGAP */
96 #define OMAP4460_FUSE_OPP_BGAP                          0x0
97
98 /* OMAP4460.TEMP_SENSOR */
99 #define OMAP4460_TEMP_SENSOR_CTRL_OFFSET                0xCC
100
101 /* OMAP4460.BANDGAP_CTRL */
102 #define OMAP4460_BGAP_CTRL_OFFSET                       0x118
103
104 /* OMAP4460.BANDGAP_COUNTER */
105 #define OMAP4460_BGAP_COUNTER_OFFSET                    0x11C
106
107 /* OMAP4460.BANDGAP_THRESHOLD */
108 #define OMAP4460_BGAP_THRESHOLD_OFFSET                  0x120
109
110 /* OMAP4460.TSHUT_THRESHOLD */
111 #define OMAP4460_BGAP_TSHUT_OFFSET                      0x124
112
113 /* OMAP4460.BANDGAP_STATUS */
114 #define OMAP4460_BGAP_STATUS_OFFSET                     0x128
115
116 /**
117  * Register bitfields for OMAP4460
118  *
119  * All the macros bellow define the required bits for
120  * controlling temperature on OMAP4460. Bit defines are
121  * grouped by register.
122  */
123 /* OMAP4460.TEMP_SENSOR bits */
124 #define OMAP4460_BGAP_TEMPSOFF_MASK                     BIT(13)
125 #define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK              BIT(11)
126 #define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK             BIT(10)
127 #define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK            (0x3ff << 0)
128
129 /* OMAP4460.BANDGAP_CTRL bits */
130 #define OMAP4460_SINGLE_MODE_MASK                       BIT(31)
131 #define OMAP4460_MASK_HOT_MASK                          BIT(1)
132 #define OMAP4460_MASK_COLD_MASK                         BIT(0)
133
134 /* OMAP4460.BANDGAP_COUNTER bits */
135 #define OMAP4460_COUNTER_MASK                           (0xffffff << 0)
136
137 /* OMAP4460.BANDGAP_THRESHOLD bits */
138 #define OMAP4460_T_HOT_MASK                             (0x3ff << 16)
139 #define OMAP4460_T_COLD_MASK                            (0x3ff << 0)
140
141 /* OMAP4460.TSHUT_THRESHOLD bits */
142 #define OMAP4460_TSHUT_HOT_MASK                         (0x3ff << 16)
143 #define OMAP4460_TSHUT_COLD_MASK                        (0x3ff << 0)
144
145 /* OMAP4460.BANDGAP_STATUS bits */
146 #define OMAP4460_CLEAN_STOP_MASK                        BIT(3)
147 #define OMAP4460_BGAP_ALERT_MASK                        BIT(2)
148 #define OMAP4460_HOT_FLAG_MASK                          BIT(1)
149 #define OMAP4460_COLD_FLAG_MASK                         BIT(0)
150
151 /**
152  * Temperature limits and thresholds for OMAP4460
153  *
154  * All the macros bellow are definitions for handling the
155  * ADC conversions and representation of temperature limits
156  * and thresholds for OMAP4460.
157  */
158
159 /* ADC conversion table limits */
160 #define OMAP4460_ADC_START_VALUE                        530
161 #define OMAP4460_ADC_END_VALUE                          932
162 /* bandgap clock limits */
163 #define OMAP4460_MAX_FREQ                               1500000
164 #define OMAP4460_MIN_FREQ                               1000000
165 /* sensor limits */
166 #define OMAP4460_MIN_TEMP                               -40000
167 #define OMAP4460_MAX_TEMP                               123000
168 #define OMAP4460_HYST_VAL                               5000
169 /* interrupts thresholds */
170 #define OMAP4460_TSHUT_HOT                              900     /* 122 deg C */
171 #define OMAP4460_TSHUT_COLD                             895     /* 100 deg C */
172 #define OMAP4460_T_HOT                                  800     /* 73 deg C */
173 #define OMAP4460_T_COLD                                 795     /* 71 deg C */
174
175 #endif /* __OMAP4XXX_BANDGAP_H */