kernel/drivers/thermal/samsung/exynos_tmu.c

   1 /*
   2  * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
   3  *
   4  *  Copyright (C) 2014 Samsung Electronics
   5  *  Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
   6  *  Lukasz Majewski <l.majewski@samsung.com>
   7  *
   8  *  Copyright (C) 2011 Samsung Electronics
   9  *  Donggeun Kim <dg77.kim@samsung.com>
  10  *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License as published by
  14  * the Free Software Foundation; either version 2 of the License, or
  15  * (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  25  *
  26  */
  27
  28 #include <linux/clk.h>
  29 #include <linux/io.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/module.h>
  32 #include <linux/of.h>
  33 #include <linux/of_address.h>
  34 #include <linux/of_irq.h>
  35 #include <linux/platform_device.h>
  36 #include <linux/regulator/consumer.h>
  37
  38 #include "exynos_tmu.h"
  39 #include "../thermal_core.h"
  40
  41 /* Exynos generic registers */
  42 #define EXYNOS_TMU_REG_TRIMINFO         0x0
  43 #define EXYNOS_TMU_REG_CONTROL          0x20
  44 #define EXYNOS_TMU_REG_STATUS           0x28
  45 #define EXYNOS_TMU_REG_CURRENT_TEMP     0x40
  46 #define EXYNOS_TMU_REG_INTEN            0x70
  47 #define EXYNOS_TMU_REG_INTSTAT          0x74
  48 #define EXYNOS_TMU_REG_INTCLEAR         0x78
  49
  50 #define EXYNOS_TMU_TEMP_MASK            0xff
  51 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT    24
  52 #define EXYNOS_TMU_REF_VOLTAGE_MASK     0x1f
  53 #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK   0xf
  54 #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT  8
  55 #define EXYNOS_TMU_CORE_EN_SHIFT        0
  56
  57 /* Exynos3250 specific registers */
  58 #define EXYNOS_TMU_TRIMINFO_CON1        0x10
  59
  60 /* Exynos4210 specific registers */
  61 #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP       0x44
  62 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0  0x50
  63
  64 /* Exynos5250, Exynos4412, Exynos3250 specific registers */
  65 #define EXYNOS_TMU_TRIMINFO_CON2        0x14
  66 #define EXYNOS_THD_TEMP_RISE            0x50
  67 #define EXYNOS_THD_TEMP_FALL            0x54
  68 #define EXYNOS_EMUL_CON         0x80
  69
  70 #define EXYNOS_TRIMINFO_RELOAD_ENABLE   1
  71 #define EXYNOS_TRIMINFO_25_SHIFT        0
  72 #define EXYNOS_TRIMINFO_85_SHIFT        8
  73 #define EXYNOS_TMU_TRIP_MODE_SHIFT      13
  74 #define EXYNOS_TMU_TRIP_MODE_MASK       0x7
  75 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT  12
  76
  77 #define EXYNOS_TMU_INTEN_RISE0_SHIFT    0
  78 #define EXYNOS_TMU_INTEN_RISE1_SHIFT    4
  79 #define EXYNOS_TMU_INTEN_RISE2_SHIFT    8
  80 #define EXYNOS_TMU_INTEN_RISE3_SHIFT    12
  81 #define EXYNOS_TMU_INTEN_FALL0_SHIFT    16
  82
  83 #define EXYNOS_EMUL_TIME        0x57F0
  84 #define EXYNOS_EMUL_TIME_MASK   0xffff
  85 #define EXYNOS_EMUL_TIME_SHIFT  16
  86 #define EXYNOS_EMUL_DATA_SHIFT  8
  87 #define EXYNOS_EMUL_DATA_MASK   0xFF
  88 #define EXYNOS_EMUL_ENABLE      0x1
  89
  90 /* Exynos5260 specific */
  91 #define EXYNOS5260_TMU_REG_INTEN                0xC0
  92 #define EXYNOS5260_TMU_REG_INTSTAT              0xC4
  93 #define EXYNOS5260_TMU_REG_INTCLEAR             0xC8
  94 #define EXYNOS5260_EMUL_CON                     0x100
  95
  96 /* Exynos4412 specific */
  97 #define EXYNOS4412_MUX_ADDR_VALUE          6
  98 #define EXYNOS4412_MUX_ADDR_SHIFT          20
  99
 100 /* Exynos5433 specific registers */
 101 #define EXYNOS5433_TMU_REG_CONTROL1             0x024
 102 #define EXYNOS5433_TMU_SAMPLING_INTERVAL        0x02c
 103 #define EXYNOS5433_TMU_COUNTER_VALUE0           0x030
 104 #define EXYNOS5433_TMU_COUNTER_VALUE1           0x034
 105 #define EXYNOS5433_TMU_REG_CURRENT_TEMP1        0x044
 106 #define EXYNOS5433_THD_TEMP_RISE3_0             0x050
 107 #define EXYNOS5433_THD_TEMP_RISE7_4             0x054
 108 #define EXYNOS5433_THD_TEMP_FALL3_0             0x060
 109 #define EXYNOS5433_THD_TEMP_FALL7_4             0x064
 110 #define EXYNOS5433_TMU_REG_INTEN                0x0c0
 111 #define EXYNOS5433_TMU_REG_INTPEND              0x0c8
 112 #define EXYNOS5433_TMU_EMUL_CON                 0x110
 113 #define EXYNOS5433_TMU_PD_DET_EN                0x130
 114
 115 #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT     16
 116 #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT     23
 117 #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK      \
 118                         (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT)
 119 #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK      BIT(23)
 120
 121 #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING  0
 122 #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING  1
 123
 124 #define EXYNOS5433_PD_DET_EN                    1
 125
 126 /*exynos5440 specific registers*/
 127 #define EXYNOS5440_TMU_S0_7_TRIM                0x000
 128 #define EXYNOS5440_TMU_S0_7_CTRL                0x020
 129 #define EXYNOS5440_TMU_S0_7_DEBUG               0x040
 130 #define EXYNOS5440_TMU_S0_7_TEMP                0x0f0
 131 #define EXYNOS5440_TMU_S0_7_TH0                 0x110
 132 #define EXYNOS5440_TMU_S0_7_TH1                 0x130
 133 #define EXYNOS5440_TMU_S0_7_TH2                 0x150
 134 #define EXYNOS5440_TMU_S0_7_IRQEN               0x210
 135 #define EXYNOS5440_TMU_S0_7_IRQ                 0x230
 136 /* exynos5440 common registers */
 137 #define EXYNOS5440_TMU_IRQ_STATUS               0x000
 138 #define EXYNOS5440_TMU_PMIN                     0x004
 139
 140 #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT        0
 141 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT        1
 142 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT        2
 143 #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT        3
 144 #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT        4
 145 #define EXYNOS5440_TMU_TH_RISE4_SHIFT           24
 146 #define EXYNOS5440_EFUSE_SWAP_OFFSET            8
 147
 148 /* Exynos7 specific registers */
 149 #define EXYNOS7_THD_TEMP_RISE7_6                0x50
 150 #define EXYNOS7_THD_TEMP_FALL7_6                0x60
 151 #define EXYNOS7_TMU_REG_INTEN                   0x110
 152 #define EXYNOS7_TMU_REG_INTPEND                 0x118
 153 #define EXYNOS7_TMU_REG_EMUL_CON                0x160
 154
 155 #define EXYNOS7_TMU_TEMP_MASK                   0x1ff
 156 #define EXYNOS7_PD_DET_EN_SHIFT                 23
 157 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT           0
 158 #define EXYNOS7_TMU_INTEN_RISE1_SHIFT           1
 159 #define EXYNOS7_TMU_INTEN_RISE2_SHIFT           2
 160 #define EXYNOS7_TMU_INTEN_RISE3_SHIFT           3
 161 #define EXYNOS7_TMU_INTEN_RISE4_SHIFT           4
 162 #define EXYNOS7_TMU_INTEN_RISE5_SHIFT           5
 163 #define EXYNOS7_TMU_INTEN_RISE6_SHIFT           6
 164 #define EXYNOS7_TMU_INTEN_RISE7_SHIFT           7
 165 #define EXYNOS7_EMUL_DATA_SHIFT                 7
 166 #define EXYNOS7_EMUL_DATA_MASK                  0x1ff
 167
 168 #define MCELSIUS        1000
 169 /**
 170  * struct exynos_tmu_data : A structure to hold the private data of the TMU
 171         driver
 172  * @id: identifier of the one instance of the TMU controller.
 173  * @pdata: pointer to the tmu platform/configuration data
 174  * @base: base address of the single instance of the TMU controller.
 175  * @base_second: base address of the common registers of the TMU controller.
 176  * @irq: irq number of the TMU controller.
 177  * @soc: id of the SOC type.
 178  * @irq_work: pointer to the irq work structure.
 179  * @lock: lock to implement synchronization.
 180  * @clk: pointer to the clock structure.
 181  * @clk_sec: pointer to the clock structure for accessing the base_second.
 182  * @sclk: pointer to the clock structure for accessing the tmu special clk.
 183  * @temp_error1: fused value of the first point trim.
 184  * @temp_error2: fused value of the second point trim.
 185  * @regulator: pointer to the TMU regulator structure.
 186  * @reg_conf: pointer to structure to register with core thermal.
 187  * @tmu_initialize: SoC specific TMU initialization method
 188  * @tmu_control: SoC specific TMU control method
 189  * @tmu_read: SoC specific TMU temperature read method
 190  * @tmu_set_emulation: SoC specific TMU emulation setting method
 191  * @tmu_clear_irqs: SoC specific TMU interrupts clearing method
 192  */
 193 struct exynos_tmu_data {
 194         int id;
 195         struct exynos_tmu_platform_data *pdata;
 196         void __iomem *base;
 197         void __iomem *base_second;
 198         int irq;
 199         enum soc_type soc;
 200         struct work_struct irq_work;
 201         struct mutex lock;
 202         struct clk *clk, *clk_sec, *sclk;
 203         u16 temp_error1, temp_error2;
 204         struct regulator *regulator;
 205         struct thermal_zone_device *tzd;
 206
 207         int (*tmu_initialize)(struct platform_device *pdev);
 208         void (*tmu_control)(struct platform_device *pdev, bool on);
 209         int (*tmu_read)(struct exynos_tmu_data *data);
 210         void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp);
 211         void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
 212 };
 213
 214 static void exynos_report_trigger(struct exynos_tmu_data *p)
 215 {
 216         char data[10], *envp[] = { data, NULL };
 217         struct thermal_zone_device *tz = p->tzd;
 218         int temp;
 219         unsigned int i;
 220
 221         if (!tz) {
 222                 pr_err("No thermal zone device defined\n");
 223                 return;
 224         }
 225
 226         thermal_zone_device_update(tz);
 227
 228         mutex_lock(&tz->lock);
 229         /* Find the level for which trip happened */
 230         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 231                 tz->ops->get_trip_temp(tz, i, &temp);
 232                 if (tz->last_temperature < temp)
 233                         break;
 234         }
 235
 236         snprintf(data, sizeof(data), "%u", i);
 237         kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp);
 238         mutex_unlock(&tz->lock);
 239 }
 240
 241 /*
 242  * TMU treats temperature as a mapped temperature code.
 243  * The temperature is converted differently depending on the calibration type.
 244  */
 245 static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
 246 {
 247         struct exynos_tmu_platform_data *pdata = data->pdata;
 248         int temp_code;
 249
 250         switch (pdata->cal_type) {
 251         case TYPE_TWO_POINT_TRIMMING:
 252                 temp_code = (temp - pdata->first_point_trim) *
 253                         (data->temp_error2 - data->temp_error1) /
 254                         (pdata->second_point_trim - pdata->first_point_trim) +
 255                         data->temp_error1;
 256                 break;
 257         case TYPE_ONE_POINT_TRIMMING:
 258                 temp_code = temp + data->temp_error1 - pdata->first_point_trim;
 259                 break;
 260         default:
 261                 temp_code = temp + pdata->default_temp_offset;
 262                 break;
 263         }
 264
 265         return temp_code;
 266 }
 267
 268 /*
 269  * Calculate a temperature value from a temperature code.
 270  * The unit of the temperature is degree Celsius.
 271  */
 272 static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
 273 {
 274         struct exynos_tmu_platform_data *pdata = data->pdata;
 275         int temp;
 276
 277         switch (pdata->cal_type) {
 278         case TYPE_TWO_POINT_TRIMMING:
 279                 temp = (temp_code - data->temp_error1) *
 280                         (pdata->second_point_trim - pdata->first_point_trim) /
 281                         (data->temp_error2 - data->temp_error1) +
 282                         pdata->first_point_trim;
 283                 break;
 284         case TYPE_ONE_POINT_TRIMMING:
 285                 temp = temp_code - data->temp_error1 + pdata->first_point_trim;
 286                 break;
 287         default:
 288                 temp = temp_code - pdata->default_temp_offset;
 289                 break;
 290         }
 291
 292         return temp;
 293 }
 294
 295 static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
 296 {
 297         struct exynos_tmu_platform_data *pdata = data->pdata;
 298
 299         data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
 300         data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
 301                                 EXYNOS_TMU_TEMP_MASK);
 302
 303         if (!data->temp_error1 ||
 304                 (pdata->min_efuse_value > data->temp_error1) ||
 305                 (data->temp_error1 > pdata->max_efuse_value))
 306                 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
 307
 308         if (!data->temp_error2)
 309                 data->temp_error2 =
 310                         (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
 311                         EXYNOS_TMU_TEMP_MASK;
 312 }
 313
 314 static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
 315 {
 316         struct thermal_zone_device *tz = data->tzd;
 317         const struct thermal_trip * const trips =
 318                 of_thermal_get_trip_points(tz);
 319         unsigned long temp;
 320         int i;
 321
 322         if (!trips) {
 323                 pr_err("%s: Cannot get trip points from of-thermal.c!\n",
 324                        __func__);
 325                 return 0;
 326         }
 327
 328         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 329                 if (trips[i].type == THERMAL_TRIP_CRITICAL)
 330                         continue;
 331
 332                 temp = trips[i].temperature / MCELSIUS;
 333                 if (falling)
 334                         temp -= (trips[i].hysteresis / MCELSIUS);
 335                 else
 336                         threshold &= ~(0xff << 8 * i);
 337
 338                 threshold |= temp_to_code(data, temp) << 8 * i;
 339         }
 340
 341         return threshold;
 342 }
 343
 344 static int exynos_tmu_initialize(struct platform_device *pdev)
 345 {
 346         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 347         int ret;
 348
 349         mutex_lock(&data->lock);
 350         clk_enable(data->clk);
 351         if (!IS_ERR(data->clk_sec))
 352                 clk_enable(data->clk_sec);
 353         ret = data->tmu_initialize(pdev);
 354         clk_disable(data->clk);
 355         mutex_unlock(&data->lock);
 356         if (!IS_ERR(data->clk_sec))
 357                 clk_disable(data->clk_sec);
 358
 359         return ret;
 360 }
 361
 362 static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
 363 {
 364         struct exynos_tmu_platform_data *pdata = data->pdata;
 365
 366         if (data->soc == SOC_ARCH_EXYNOS4412 ||
 367             data->soc == SOC_ARCH_EXYNOS3250)
 368                 con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
 369
 370         con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
 371         con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
 372
 373         con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
 374         con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
 375
 376         if (pdata->noise_cancel_mode) {
 377                 con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
 378                 con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
 379         }
 380
 381         return con;
 382 }
 383
 384 static void exynos_tmu_control(struct platform_device *pdev, bool on)
 385 {
 386         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 387
 388         mutex_lock(&data->lock);
 389         clk_enable(data->clk);
 390         data->tmu_control(pdev, on);
 391         clk_disable(data->clk);
 392         mutex_unlock(&data->lock);
 393 }
 394
 395 static int exynos4210_tmu_initialize(struct platform_device *pdev)
 396 {
 397         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 398         struct thermal_zone_device *tz = data->tzd;
 399         const struct thermal_trip * const trips =
 400                 of_thermal_get_trip_points(tz);
 401         int ret = 0, threshold_code, i;
 402         unsigned long reference, temp;
 403         unsigned int status;
 404
 405         if (!trips) {
 406                 pr_err("%s: Cannot get trip points from of-thermal.c!\n",
 407                        __func__);
 408                 ret = -ENODEV;
 409                 goto out;
 410         }
 411
 412         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 413         if (!status) {
 414                 ret = -EBUSY;
 415                 goto out;
 416         }
 417
 418         sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
 419
 420         /* Write temperature code for threshold */
 421         reference = trips[0].temperature / MCELSIUS;
 422         threshold_code = temp_to_code(data, reference);
 423         if (threshold_code < 0) {
 424                 ret = threshold_code;
 425                 goto out;
 426         }
 427         writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
 428
 429         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 430                 temp = trips[i].temperature / MCELSIUS;
 431                 writeb(temp - reference, data->base +
 432                        EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
 433         }
 434
 435         data->tmu_clear_irqs(data);
 436 out:
 437         return ret;
 438 }
 439
 440 static int exynos4412_tmu_initialize(struct platform_device *pdev)
 441 {
 442         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 443         const struct thermal_trip * const trips =
 444                 of_thermal_get_trip_points(data->tzd);
 445         unsigned int status, trim_info, con, ctrl, rising_threshold;
 446         int ret = 0, threshold_code, i;
 447         unsigned long crit_temp = 0;
 448
 449         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 450         if (!status) {
 451                 ret = -EBUSY;
 452                 goto out;
 453         }
 454
 455         if (data->soc == SOC_ARCH_EXYNOS3250 ||
 456             data->soc == SOC_ARCH_EXYNOS4412 ||
 457             data->soc == SOC_ARCH_EXYNOS5250) {
 458                 if (data->soc == SOC_ARCH_EXYNOS3250) {
 459                         ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
 460                         ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
 461                         writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
 462                 }
 463                 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
 464                 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
 465                 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
 466         }
 467
 468         /* On exynos5420 the triminfo register is in the shared space */
 469         if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
 470                 trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
 471         else
 472                 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
 473
 474         sanitize_temp_error(data, trim_info);
 475
 476         /* Write temperature code for rising and falling threshold */
 477         rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
 478         rising_threshold = get_th_reg(data, rising_threshold, false);
 479         writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
 480         writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
 481
 482         data->tmu_clear_irqs(data);
 483
 484         /* if last threshold limit is also present */
 485         for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
 486                 if (trips[i].type == THERMAL_TRIP_CRITICAL) {
 487                         crit_temp = trips[i].temperature;
 488                         break;
 489                 }
 490         }
 491
 492         if (i == of_thermal_get_ntrips(data->tzd)) {
 493                 pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
 494                        __func__);
 495                 ret = -EINVAL;
 496                 goto out;
 497         }
 498
 499         threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
 500         /* 1-4 level to be assigned in th0 reg */
 501         rising_threshold &= ~(0xff << 8 * i);
 502         rising_threshold |= threshold_code << 8 * i;
 503         writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
 504         con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
 505         con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
 506         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 507
 508 out:
 509         return ret;
 510 }
 511
 512 static int exynos5433_tmu_initialize(struct platform_device *pdev)
 513 {
 514         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 515         struct exynos_tmu_platform_data *pdata = data->pdata;
 516         struct thermal_zone_device *tz = data->tzd;
 517         unsigned int status, trim_info;
 518         unsigned int rising_threshold = 0, falling_threshold = 0;
 519         int temp, temp_hist;
 520         int ret = 0, threshold_code, i, sensor_id, cal_type;
 521
 522         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 523         if (!status) {
 524                 ret = -EBUSY;
 525                 goto out;
 526         }
 527
 528         trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
 529         sanitize_temp_error(data, trim_info);
 530
 531         /* Read the temperature sensor id */
 532         sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
 533                                 >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
 534         dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id);
 535
 536         /* Read the calibration mode */
 537         writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
 538         cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
 539                                 >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT;
 540
 541         switch (cal_type) {
 542         case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
 543                 pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
 544                 break;
 545         case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
 546                 pdata->cal_type = TYPE_TWO_POINT_TRIMMING;
 547                 break;
 548         default:
 549                 pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
 550                 break;
 551         }
 552
 553         dev_info(&pdev->dev, "Calibration type is %d-point calibration\n",
 554                         cal_type ?  2 : 1);
 555
 556         /* Write temperature code for rising and falling threshold */
 557         for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
 558                 int rising_reg_offset, falling_reg_offset;
 559                 int j = 0;
 560
 561                 switch (i) {
 562                 case 0:
 563                 case 1:
 564                 case 2:
 565                 case 3:
 566                         rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0;
 567                         falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0;
 568                         j = i;
 569                         break;
 570                 case 4:
 571                 case 5:
 572                 case 6:
 573                 case 7:
 574                         rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4;
 575                         falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4;
 576                         j = i - 4;
 577                         break;
 578                 default:
 579                         continue;
 580                 }
 581
 582                 /* Write temperature code for rising threshold */
 583                 tz->ops->get_trip_temp(tz, i, &temp);
 584                 temp /= MCELSIUS;
 585                 threshold_code = temp_to_code(data, temp);
 586
 587                 rising_threshold = readl(data->base + rising_reg_offset);
 588                 rising_threshold |= (threshold_code << j * 8);
 589                 writel(rising_threshold, data->base + rising_reg_offset);
 590
 591                 /* Write temperature code for falling threshold */
 592                 tz->ops->get_trip_hyst(tz, i, &temp_hist);
 593                 temp_hist = temp - (temp_hist / MCELSIUS);
 594                 threshold_code = temp_to_code(data, temp_hist);
 595
 596                 falling_threshold = readl(data->base + falling_reg_offset);
 597                 falling_threshold &= ~(0xff << j * 8);
 598                 falling_threshold |= (threshold_code << j * 8);
 599                 writel(falling_threshold, data->base + falling_reg_offset);
 600         }
 601
 602         data->tmu_clear_irqs(data);
 603 out:
 604         return ret;
 605 }
 606
 607 static int exynos5440_tmu_initialize(struct platform_device *pdev)
 608 {
 609         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 610         unsigned int trim_info = 0, con, rising_threshold;
 611         int threshold_code;
 612         int crit_temp = 0;
 613
 614         /*
 615          * For exynos5440 soc triminfo value is swapped between TMU0 and
 616          * TMU2, so the below logic is needed.
 617          */
 618         switch (data->id) {
 619         case 0:
 620                 trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
 621                                  EXYNOS5440_TMU_S0_7_TRIM);
 622                 break;
 623         case 1:
 624                 trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
 625                 break;
 626         case 2:
 627                 trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
 628                                   EXYNOS5440_TMU_S0_7_TRIM);
 629         }
 630         sanitize_temp_error(data, trim_info);
 631
 632         /* Write temperature code for rising and falling threshold */
 633         rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
 634         rising_threshold = get_th_reg(data, rising_threshold, false);
 635         writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
 636         writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
 637
 638         data->tmu_clear_irqs(data);
 639
 640         /* if last threshold limit is also present */
 641         if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) {
 642                 threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
 643                 /* 5th level to be assigned in th2 reg */
 644                 rising_threshold =
 645                         threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
 646                 writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
 647                 con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
 648                 con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
 649                 writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
 650         }
 651         /* Clear the PMIN in the common TMU register */
 652         if (!data->id)
 653                 writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
 654
 655         return 0;
 656 }
 657
 658 static int exynos7_tmu_initialize(struct platform_device *pdev)
 659 {
 660         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 661         struct thermal_zone_device *tz = data->tzd;
 662         struct exynos_tmu_platform_data *pdata = data->pdata;
 663         unsigned int status, trim_info;
 664         unsigned int rising_threshold = 0, falling_threshold = 0;
 665         int ret = 0, threshold_code, i;
 666         int temp, temp_hist;
 667         unsigned int reg_off, bit_off;
 668
 669         status = readb(data->base + EXYNOS_TMU_REG_STATUS);
 670         if (!status) {
 671                 ret = -EBUSY;
 672                 goto out;
 673         }
 674
 675         trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
 676
 677         data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK;
 678         if (!data->temp_error1 ||
 679             (pdata->min_efuse_value > data->temp_error1) ||
 680             (data->temp_error1 > pdata->max_efuse_value))
 681                 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
 682
 683         /* Write temperature code for rising and falling threshold */
 684         for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) {
 685                 /*
 686                  * On exynos7 there are 4 rising and 4 falling threshold
 687                  * registers (0x50-0x5c and 0x60-0x6c respectively). Each
 688                  * register holds the value of two threshold levels (at bit
 689                  * offsets 0 and 16). Based on the fact that there are atmost
 690                  * eight possible trigger levels, calculate the register and
 691                  * bit offsets where the threshold levels are to be written.
 692                  *
 693                  * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50)
 694                  * [24:16] - Threshold level 7
 695                  * [8:0] - Threshold level 6
 696                  * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54)
 697                  * [24:16] - Threshold level 5
 698                  * [8:0] - Threshold level 4
 699                  *
 700                  * and similarly for falling thresholds.
 701                  *
 702                  * Based on the above, calculate the register and bit offsets
 703                  * for rising/falling threshold levels and populate them.
 704                  */
 705                 reg_off = ((7 - i) / 2) * 4;
 706                 bit_off = ((8 - i) % 2);
 707
 708                 tz->ops->get_trip_temp(tz, i, &temp);
 709                 temp /= MCELSIUS;
 710
 711                 tz->ops->get_trip_hyst(tz, i, &temp_hist);
 712                 temp_hist = temp - (temp_hist / MCELSIUS);
 713
 714                 /* Set 9-bit temperature code for rising threshold levels */
 715                 threshold_code = temp_to_code(data, temp);
 716                 rising_threshold = readl(data->base +
 717                         EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
 718                 rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
 719                 rising_threshold |= threshold_code << (16 * bit_off);
 720                 writel(rising_threshold,
 721                        data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off);
 722
 723                 /* Set 9-bit temperature code for falling threshold levels */
 724                 threshold_code = temp_to_code(data, temp_hist);
 725                 falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off));
 726                 falling_threshold |= threshold_code << (16 * bit_off);
 727                 writel(falling_threshold,
 728                        data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off);
 729         }
 730
 731         data->tmu_clear_irqs(data);
 732 out:
 733         return ret;
 734 }
 735
 736 static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
 737 {
 738         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 739         struct thermal_zone_device *tz = data->tzd;
 740         unsigned int con, interrupt_en;
 741
 742         con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 743
 744         if (on) {
 745                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 746                 interrupt_en =
 747                         (of_thermal_is_trip_valid(tz, 3)
 748                          << EXYNOS_TMU_INTEN_RISE3_SHIFT) |
 749                         (of_thermal_is_trip_valid(tz, 2)
 750                          << EXYNOS_TMU_INTEN_RISE2_SHIFT) |
 751                         (of_thermal_is_trip_valid(tz, 1)
 752                          << EXYNOS_TMU_INTEN_RISE1_SHIFT) |
 753                         (of_thermal_is_trip_valid(tz, 0)
 754                          << EXYNOS_TMU_INTEN_RISE0_SHIFT);
 755
 756                 if (data->soc != SOC_ARCH_EXYNOS4210)
 757                         interrupt_en |=
 758                                 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 759         } else {
 760                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 761                 interrupt_en = 0; /* Disable all interrupts */
 762         }
 763         writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
 764         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 765 }
 766
 767 static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
 768 {
 769         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 770         struct thermal_zone_device *tz = data->tzd;
 771         unsigned int con, interrupt_en, pd_det_en;
 772
 773         con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 774
 775         if (on) {
 776                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 777                 interrupt_en =
 778                         (of_thermal_is_trip_valid(tz, 7)
 779                         << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
 780                         (of_thermal_is_trip_valid(tz, 6)
 781                         << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
 782                         (of_thermal_is_trip_valid(tz, 5)
 783                         << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
 784                         (of_thermal_is_trip_valid(tz, 4)
 785                         << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
 786                         (of_thermal_is_trip_valid(tz, 3)
 787                         << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
 788                         (of_thermal_is_trip_valid(tz, 2)
 789                         << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
 790                         (of_thermal_is_trip_valid(tz, 1)
 791                         << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
 792                         (of_thermal_is_trip_valid(tz, 0)
 793                         << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
 794
 795                 interrupt_en |=
 796                         interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 797         } else {
 798                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 799                 interrupt_en = 0; /* Disable all interrupts */
 800         }
 801
 802         pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
 803
 804         writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
 805         writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN);
 806         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 807 }
 808
 809 static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
 810 {
 811         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 812         struct thermal_zone_device *tz = data->tzd;
 813         unsigned int con, interrupt_en;
 814
 815         con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
 816
 817         if (on) {
 818                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 819                 interrupt_en =
 820                         (of_thermal_is_trip_valid(tz, 3)
 821                          << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
 822                         (of_thermal_is_trip_valid(tz, 2)
 823                          << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
 824                         (of_thermal_is_trip_valid(tz, 1)
 825                          << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
 826                         (of_thermal_is_trip_valid(tz, 0)
 827                          << EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
 828                 interrupt_en |=
 829                         interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
 830         } else {
 831                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 832                 interrupt_en = 0; /* Disable all interrupts */
 833         }
 834         writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
 835         writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
 836 }
 837
 838 static void exynos7_tmu_control(struct platform_device *pdev, bool on)
 839 {
 840         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 841         struct thermal_zone_device *tz = data->tzd;
 842         unsigned int con, interrupt_en;
 843
 844         con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 845
 846         if (on) {
 847                 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
 848                 con |= (1 << EXYNOS7_PD_DET_EN_SHIFT);
 849                 interrupt_en =
 850                         (of_thermal_is_trip_valid(tz, 7)
 851                         << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
 852                         (of_thermal_is_trip_valid(tz, 6)
 853                         << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
 854                         (of_thermal_is_trip_valid(tz, 5)
 855                         << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
 856                         (of_thermal_is_trip_valid(tz, 4)
 857                         << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
 858                         (of_thermal_is_trip_valid(tz, 3)
 859                         << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
 860                         (of_thermal_is_trip_valid(tz, 2)
 861                         << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
 862                         (of_thermal_is_trip_valid(tz, 1)
 863                         << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
 864                         (of_thermal_is_trip_valid(tz, 0)
 865                         << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
 866
 867                 interrupt_en |=
 868                         interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
 869         } else {
 870                 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
 871                 con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT);
 872                 interrupt_en = 0; /* Disable all interrupts */
 873         }
 874
 875         writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN);
 876         writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
 877 }
 878
 879 static int exynos_get_temp(void *p, int *temp)
 880 {
 881         struct exynos_tmu_data *data = p;
 882
 883         if (!data || !data->tmu_read)
 884                 return -EINVAL;
 885
 886         mutex_lock(&data->lock);
 887         clk_enable(data->clk);
 888
 889         *temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS;
 890
 891         clk_disable(data->clk);
 892         mutex_unlock(&data->lock);
 893
 894         return 0;
 895 }
 896
 897 #ifdef CONFIG_THERMAL_EMULATION
 898 static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
 899                             int temp)
 900 {
 901         if (temp) {
 902                 temp /= MCELSIUS;
 903
 904                 if (data->soc != SOC_ARCH_EXYNOS5440) {
 905                         val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
 906                         val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
 907                 }
 908                 if (data->soc == SOC_ARCH_EXYNOS7) {
 909                         val &= ~(EXYNOS7_EMUL_DATA_MASK <<
 910                                 EXYNOS7_EMUL_DATA_SHIFT);
 911                         val |= (temp_to_code(data, temp) <<
 912                                 EXYNOS7_EMUL_DATA_SHIFT) |
 913                                 EXYNOS_EMUL_ENABLE;
 914                 } else {
 915                         val &= ~(EXYNOS_EMUL_DATA_MASK <<
 916                                 EXYNOS_EMUL_DATA_SHIFT);
 917                         val |= (temp_to_code(data, temp) <<
 918                                 EXYNOS_EMUL_DATA_SHIFT) |
 919                                 EXYNOS_EMUL_ENABLE;
 920                 }
 921         } else {
 922                 val &= ~EXYNOS_EMUL_ENABLE;
 923         }
 924
 925         return val;
 926 }
 927
 928 static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
 929                                          int temp)
 930 {
 931         unsigned int val;
 932         u32 emul_con;
 933
 934         if (data->soc == SOC_ARCH_EXYNOS5260)
 935                 emul_con = EXYNOS5260_EMUL_CON;
 936         else if (data->soc == SOC_ARCH_EXYNOS5433)
 937                 emul_con = EXYNOS5433_TMU_EMUL_CON;
 938         else if (data->soc == SOC_ARCH_EXYNOS7)
 939                 emul_con = EXYNOS7_TMU_REG_EMUL_CON;
 940         else
 941                 emul_con = EXYNOS_EMUL_CON;
 942
 943         val = readl(data->base + emul_con);
 944         val = get_emul_con_reg(data, val, temp);
 945         writel(val, data->base + emul_con);
 946 }
 947
 948 static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
 949                                          int temp)
 950 {
 951         unsigned int val;
 952
 953         val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG);
 954         val = get_emul_con_reg(data, val, temp);
 955         writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG);
 956 }
 957
 958 static int exynos_tmu_set_emulation(void *drv_data, int temp)
 959 {
 960         struct exynos_tmu_data *data = drv_data;
 961         int ret = -EINVAL;
 962
 963         if (data->soc == SOC_ARCH_EXYNOS4210)
 964                 goto out;
 965
 966         if (temp && temp < MCELSIUS)
 967                 goto out;
 968
 969         mutex_lock(&data->lock);
 970         clk_enable(data->clk);
 971         data->tmu_set_emulation(data, temp);
 972         clk_disable(data->clk);
 973         mutex_unlock(&data->lock);
 974         return 0;
 975 out:
 976         return ret;
 977 }
 978 #else
 979 #define exynos4412_tmu_set_emulation NULL
 980 #define exynos5440_tmu_set_emulation NULL
 981 static int exynos_tmu_set_emulation(void *drv_data, int temp)
 982         { return -EINVAL; }
 983 #endif /* CONFIG_THERMAL_EMULATION */
 984
 985 static int exynos4210_tmu_read(struct exynos_tmu_data *data)
 986 {
 987         int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
 988
 989         /* "temp_code" should range between 75 and 175 */
 990         return (ret < 75 || ret > 175) ? -ENODATA : ret;
 991 }
 992
 993 static int exynos4412_tmu_read(struct exynos_tmu_data *data)
 994 {
 995         return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
 996 }
 997
 998 static int exynos5440_tmu_read(struct exynos_tmu_data *data)
 999 {
1000         return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
1001 }
1002
1003 static int exynos7_tmu_read(struct exynos_tmu_data *data)
1004 {
1005         return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) &
1006                 EXYNOS7_TMU_TEMP_MASK;
1007 }
1008
1009 static void exynos_tmu_work(struct work_struct *work)
1010 {
1011         struct exynos_tmu_data *data = container_of(work,
1012                         struct exynos_tmu_data, irq_work);
1013         unsigned int val_type;
1014
1015         if (!IS_ERR(data->clk_sec))
1016                 clk_enable(data->clk_sec);
1017         /* Find which sensor generated this interrupt */
1018         if (data->soc == SOC_ARCH_EXYNOS5440) {
1019                 val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS);
1020                 if (!((val_type >> data->id) & 0x1))
1021                         goto out;
1022         }
1023         if (!IS_ERR(data->clk_sec))
1024                 clk_disable(data->clk_sec);
1025
1026         exynos_report_trigger(data);
1027         mutex_lock(&data->lock);
1028         clk_enable(data->clk);
1029
1030         /* TODO: take action based on particular interrupt */
1031         data->tmu_clear_irqs(data);
1032
1033         clk_disable(data->clk);
1034         mutex_unlock(&data->lock);
1035 out:
1036         enable_irq(data->irq);
1037 }
1038
1039 static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
1040 {
1041         unsigned int val_irq;
1042         u32 tmu_intstat, tmu_intclear;
1043
1044         if (data->soc == SOC_ARCH_EXYNOS5260) {
1045                 tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
1046                 tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
1047         } else if (data->soc == SOC_ARCH_EXYNOS7) {
1048                 tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
1049                 tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
1050         } else if (data->soc == SOC_ARCH_EXYNOS5433) {
1051                 tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
1052                 tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
1053         } else {
1054                 tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
1055                 tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
1056         }
1057
1058         val_irq = readl(data->base + tmu_intstat);
1059         /*
1060          * Clear the interrupts.  Please note that the documentation for
1061          * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
1062          * states that INTCLEAR register has a different placing of bits
1063          * responsible for FALL IRQs than INTSTAT register.  Exynos5420
1064          * and Exynos5440 documentation is correct (Exynos4210 doesn't
1065          * support FALL IRQs at all).
1066          */
1067         writel(val_irq, data->base + tmu_intclear);
1068 }
1069
1070 static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data)
1071 {
1072         unsigned int val_irq;
1073
1074         val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ);
1075         /* clear the interrupts */
1076         writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ);
1077 }
1078
1079 static irqreturn_t exynos_tmu_irq(int irq, void *id)
1080 {
1081         struct exynos_tmu_data *data = id;
1082
1083         disable_irq_nosync(irq);
1084         schedule_work(&data->irq_work);
1085
1086         return IRQ_HANDLED;
1087 }
1088
1089 static const struct of_device_id exynos_tmu_match[] = {
1090         { .compatible = "samsung,exynos3250-tmu", },
1091         { .compatible = "samsung,exynos4210-tmu", },
1092         { .compatible = "samsung,exynos4412-tmu", },
1093         { .compatible = "samsung,exynos5250-tmu", },
1094         { .compatible = "samsung,exynos5260-tmu", },
1095         { .compatible = "samsung,exynos5420-tmu", },
1096         { .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
1097         { .compatible = "samsung,exynos5433-tmu", },
1098         { .compatible = "samsung,exynos5440-tmu", },
1099         { .compatible = "samsung,exynos7-tmu", },
1100         { /* sentinel */ },
1101 };
1102 MODULE_DEVICE_TABLE(of, exynos_tmu_match);
1103
1104 static int exynos_of_get_soc_type(struct device_node *np)
1105 {
1106         if (of_device_is_compatible(np, "samsung,exynos3250-tmu"))
1107                 return SOC_ARCH_EXYNOS3250;
1108         else if (of_device_is_compatible(np, "samsung,exynos4210-tmu"))
1109                 return SOC_ARCH_EXYNOS4210;
1110         else if (of_device_is_compatible(np, "samsung,exynos4412-tmu"))
1111                 return SOC_ARCH_EXYNOS4412;
1112         else if (of_device_is_compatible(np, "samsung,exynos5250-tmu"))
1113                 return SOC_ARCH_EXYNOS5250;
1114         else if (of_device_is_compatible(np, "samsung,exynos5260-tmu"))
1115                 return SOC_ARCH_EXYNOS5260;
1116         else if (of_device_is_compatible(np, "samsung,exynos5420-tmu"))
1117                 return SOC_ARCH_EXYNOS5420;
1118         else if (of_device_is_compatible(np,
1119                                          "samsung,exynos5420-tmu-ext-triminfo"))
1120                 return SOC_ARCH_EXYNOS5420_TRIMINFO;
1121         else if (of_device_is_compatible(np, "samsung,exynos5433-tmu"))
1122                 return SOC_ARCH_EXYNOS5433;
1123         else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
1124                 return SOC_ARCH_EXYNOS5440;
1125         else if (of_device_is_compatible(np, "samsung,exynos7-tmu"))
1126                 return SOC_ARCH_EXYNOS7;
1127
1128         return -EINVAL;
1129 }
1130
1131 static int exynos_of_sensor_conf(struct device_node *np,
1132                                  struct exynos_tmu_platform_data *pdata)
1133 {
1134         u32 value;
1135         int ret;
1136
1137         of_node_get(np);
1138
1139         ret = of_property_read_u32(np, "samsung,tmu_gain", &value);
1140         pdata->gain = (u8)value;
1141         of_property_read_u32(np, "samsung,tmu_reference_voltage", &value);
1142         pdata->reference_voltage = (u8)value;
1143         of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value);
1144         pdata->noise_cancel_mode = (u8)value;
1145
1146         of_property_read_u32(np, "samsung,tmu_efuse_value",
1147                              &pdata->efuse_value);
1148         of_property_read_u32(np, "samsung,tmu_min_efuse_value",
1149                              &pdata->min_efuse_value);
1150         of_property_read_u32(np, "samsung,tmu_max_efuse_value",
1151                              &pdata->max_efuse_value);
1152
1153         of_property_read_u32(np, "samsung,tmu_first_point_trim", &value);
1154         pdata->first_point_trim = (u8)value;
1155         of_property_read_u32(np, "samsung,tmu_second_point_trim", &value);
1156         pdata->second_point_trim = (u8)value;
1157         of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value);
1158         pdata->default_temp_offset = (u8)value;
1159
1160         of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type);
1161         of_property_read_u32(np, "samsung,tmu_cal_mode", &pdata->cal_mode);
1162
1163         of_node_put(np);
1164         return 0;
1165 }
1166
1167 static int exynos_map_dt_data(struct platform_device *pdev)
1168 {
1169         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
1170         struct exynos_tmu_platform_data *pdata;
1171         struct resource res;
1172
1173         if (!data || !pdev->dev.of_node)
1174                 return -ENODEV;
1175
1176         data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
1177         if (data->id < 0)
1178                 data->id = 0;
1179
1180         data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
1181         if (data->irq <= 0) {
1182                 dev_err(&pdev->dev, "failed to get IRQ\n");
1183                 return -ENODEV;
1184         }
1185
1186         if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
1187                 dev_err(&pdev->dev, "failed to get Resource 0\n");
1188                 return -ENODEV;
1189         }
1190
1191         data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
1192         if (!data->base) {
1193                 dev_err(&pdev->dev, "Failed to ioremap memory\n");
1194                 return -EADDRNOTAVAIL;
1195         }
1196
1197         pdata = devm_kzalloc(&pdev->dev,
1198                              sizeof(struct exynos_tmu_platform_data),
1199                              GFP_KERNEL);
1200         if (!pdata)
1201                 return -ENOMEM;
1202
1203         exynos_of_sensor_conf(pdev->dev.of_node, pdata);
1204         data->pdata = pdata;
1205         data->soc = exynos_of_get_soc_type(pdev->dev.of_node);
1206
1207         switch (data->soc) {
1208         case SOC_ARCH_EXYNOS4210:
1209                 data->tmu_initialize = exynos4210_tmu_initialize;
1210                 data->tmu_control = exynos4210_tmu_control;
1211                 data->tmu_read = exynos4210_tmu_read;
1212                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1213                 break;
1214         case SOC_ARCH_EXYNOS3250:
1215         case SOC_ARCH_EXYNOS4412:
1216         case SOC_ARCH_EXYNOS5250:
1217         case SOC_ARCH_EXYNOS5260:
1218         case SOC_ARCH_EXYNOS5420:
1219         case SOC_ARCH_EXYNOS5420_TRIMINFO:
1220                 data->tmu_initialize = exynos4412_tmu_initialize;
1221                 data->tmu_control = exynos4210_tmu_control;
1222                 data->tmu_read = exynos4412_tmu_read;
1223                 data->tmu_set_emulation = exynos4412_tmu_set_emulation;
1224                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1225                 break;
1226         case SOC_ARCH_EXYNOS5433:
1227                 data->tmu_initialize = exynos5433_tmu_initialize;
1228                 data->tmu_control = exynos5433_tmu_control;
1229                 data->tmu_read = exynos4412_tmu_read;
1230                 data->tmu_set_emulation = exynos4412_tmu_set_emulation;
1231                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1232                 break;
1233         case SOC_ARCH_EXYNOS5440:
1234                 data->tmu_initialize = exynos5440_tmu_initialize;
1235                 data->tmu_control = exynos5440_tmu_control;
1236                 data->tmu_read = exynos5440_tmu_read;
1237                 data->tmu_set_emulation = exynos5440_tmu_set_emulation;
1238                 data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
1239                 break;
1240         case SOC_ARCH_EXYNOS7:
1241                 data->tmu_initialize = exynos7_tmu_initialize;
1242                 data->tmu_control = exynos7_tmu_control;
1243                 data->tmu_read = exynos7_tmu_read;
1244                 data->tmu_set_emulation = exynos4412_tmu_set_emulation;
1245                 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
1246                 break;
1247         default:
1248                 dev_err(&pdev->dev, "Platform not supported\n");
1249                 return -EINVAL;
1250         }
1251
1252         /*
1253          * Check if the TMU shares some registers and then try to map the
1254          * memory of common registers.
1255          */
1256         if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
1257             data->soc != SOC_ARCH_EXYNOS5440)
1258                 return 0;
1259
1260         if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
1261                 dev_err(&pdev->dev, "failed to get Resource 1\n");
1262                 return -ENODEV;
1263         }
1264
1265         data->base_second = devm_ioremap(&pdev->dev, res.start,
1266                                         resource_size(&res));
1267         if (!data->base_second) {
1268                 dev_err(&pdev->dev, "Failed to ioremap memory\n");
1269                 return -ENOMEM;
1270         }
1271
1272         return 0;
1273 }
1274
1275 static struct thermal_zone_of_device_ops exynos_sensor_ops = {
1276         .get_temp = exynos_get_temp,
1277         .set_emul_temp = exynos_tmu_set_emulation,
1278 };
1279
1280 static int exynos_tmu_probe(struct platform_device *pdev)
1281 {
1282         struct exynos_tmu_data *data;
1283         int ret;
1284
1285         data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
1286                                         GFP_KERNEL);
1287         if (!data)
1288                 return -ENOMEM;
1289
1290         platform_set_drvdata(pdev, data);
1291         mutex_init(&data->lock);
1292
1293         /*
1294          * Try enabling the regulator if found
1295          * TODO: Add regulator as an SOC feature, so that regulator enable
1296          * is a compulsory call.
1297          */
1298         data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
1299         if (!IS_ERR(data->regulator)) {
1300                 ret = regulator_enable(data->regulator);
1301                 if (ret) {
1302                         dev_err(&pdev->dev, "failed to enable vtmu\n");
1303                         return ret;
1304                 }
1305         } else {
1306                 dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
1307         }
1308
1309         ret = exynos_map_dt_data(pdev);
1310         if (ret)
1311                 goto err_sensor;
1312
1313         INIT_WORK(&data->irq_work, exynos_tmu_work);
1314
1315         data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
1316         if (IS_ERR(data->clk)) {
1317                 dev_err(&pdev->dev, "Failed to get clock\n");
1318                 ret = PTR_ERR(data->clk);
1319                 goto err_sensor;
1320         }
1321
1322         data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
1323         if (IS_ERR(data->clk_sec)) {
1324                 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
1325                         dev_err(&pdev->dev, "Failed to get triminfo clock\n");
1326                         ret = PTR_ERR(data->clk_sec);
1327                         goto err_sensor;
1328                 }
1329         } else {
1330                 ret = clk_prepare(data->clk_sec);
1331                 if (ret) {
1332                         dev_err(&pdev->dev, "Failed to get clock\n");
1333                         goto err_sensor;
1334                 }
1335         }
1336
1337         ret = clk_prepare(data->clk);
1338         if (ret) {
1339                 dev_err(&pdev->dev, "Failed to get clock\n");
1340                 goto err_clk_sec;
1341         }
1342
1343         switch (data->soc) {
1344         case SOC_ARCH_EXYNOS5433:
1345         case SOC_ARCH_EXYNOS7:
1346                 data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
1347                 if (IS_ERR(data->sclk)) {
1348                         dev_err(&pdev->dev, "Failed to get sclk\n");
1349                         goto err_clk;
1350                 } else {
1351                         ret = clk_prepare_enable(data->sclk);
1352                         if (ret) {
1353                                 dev_err(&pdev->dev, "Failed to enable sclk\n");
1354                                 goto err_clk;
1355                         }
1356                 }
1357                 break;
1358         default:
1359                 break;
1360         }
1361
1362         /*
1363          * data->tzd must be registered before calling exynos_tmu_initialize(),
1364          * requesting irq and calling exynos_tmu_control().
1365          */
1366         data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
1367                                                     &exynos_sensor_ops);
1368         if (IS_ERR(data->tzd)) {
1369                 ret = PTR_ERR(data->tzd);
1370                 dev_err(&pdev->dev, "Failed to register sensor: %d\n", ret);
1371                 goto err_sclk;
1372         }
1373
1374         ret = exynos_tmu_initialize(pdev);
1375         if (ret) {
1376                 dev_err(&pdev->dev, "Failed to initialize TMU\n");
1377                 goto err_thermal;
1378         }
1379
1380         ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
1381                 IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
1382         if (ret) {
1383                 dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
1384                 goto err_thermal;
1385         }
1386
1387         exynos_tmu_control(pdev, true);
1388         return 0;
1389
1390 err_thermal:
1391         thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
1392 err_sclk:
1393         clk_disable_unprepare(data->sclk);
1394 err_clk:
1395         clk_unprepare(data->clk);
1396 err_clk_sec:
1397         if (!IS_ERR(data->clk_sec))
1398                 clk_unprepare(data->clk_sec);
1399 err_sensor:
1400         if (!IS_ERR(data->regulator))
1401                 regulator_disable(data->regulator);
1402
1403         return ret;
1404 }
1405
1406 static int exynos_tmu_remove(struct platform_device *pdev)
1407 {
1408         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
1409         struct thermal_zone_device *tzd = data->tzd;
1410
1411         thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
1412         exynos_tmu_control(pdev, false);
1413
1414         clk_disable_unprepare(data->sclk);
1415         clk_unprepare(data->clk);
1416         if (!IS_ERR(data->clk_sec))
1417                 clk_unprepare(data->clk_sec);
1418
1419         if (!IS_ERR(data->regulator))
1420                 regulator_disable(data->regulator);
1421
1422         return 0;
1423 }
1424
1425 #ifdef CONFIG_PM_SLEEP
1426 static int exynos_tmu_suspend(struct device *dev)
1427 {
1428         exynos_tmu_control(to_platform_device(dev), false);
1429
1430         return 0;
1431 }
1432
1433 static int exynos_tmu_resume(struct device *dev)
1434 {
1435         struct platform_device *pdev = to_platform_device(dev);
1436
1437         exynos_tmu_initialize(pdev);
1438         exynos_tmu_control(pdev, true);
1439
1440         return 0;
1441 }
1442
1443 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
1444                          exynos_tmu_suspend, exynos_tmu_resume);
1445 #define EXYNOS_TMU_PM   (&exynos_tmu_pm)
1446 #else
1447 #define EXYNOS_TMU_PM   NULL
1448 #endif
1449
1450 static struct platform_driver exynos_tmu_driver = {
1451         .driver = {
1452                 .name   = "exynos-tmu",
1453                 .pm     = EXYNOS_TMU_PM,
1454                 .of_match_table = exynos_tmu_match,
1455         },
1456         .probe = exynos_tmu_probe,
1457         .remove = exynos_tmu_remove,
1458 };
1459
1460 module_platform_driver(exynos_tmu_driver);
1461
1462 MODULE_DESCRIPTION("EXYNOS TMU Driver");
1463 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
1464 MODULE_LICENSE("GPL");
1465 MODULE_ALIAS("platform:exynos-tmu");