1 /******************************************************************************
3 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
19 ******************************************************************************/
20 #ifndef __RTL8188E_HAL_H__
21 #define __RTL8188E_HAL_H__
24 /* include HAL Related header after HAL Related compiling flags */
25 #include "rtl8188e_spec.h"
26 #include "Hal8188EPhyReg.h"
27 #include "Hal8188EPhyCfg.h"
28 #include "rtl8188e_dm.h"
29 #include "rtl8188e_recv.h"
30 #include "rtl8188e_xmit.h"
31 #include "rtl8188e_cmd.h"
33 #include "rtw_efuse.h"
34 #include "rtw_sreset.h"
35 #include "odm_precomp.h"
38 #define Rtl8188E_FwImageArray Rtl8188EFwImgArray
39 #define Rtl8188E_FWImgArrayLength Rtl8188EFWImgArrayLength
41 #define RTL8188E_FW_UMC_IMG "rtl8188E\\rtl8188efw.bin"
42 #define RTL8188E_PHY_REG "rtl8188E\\PHY_REG_1T.txt"
43 #define RTL8188E_PHY_RADIO_A "rtl8188E\\radio_a_1T.txt"
44 #define RTL8188E_PHY_RADIO_B "rtl8188E\\radio_b_1T.txt"
45 #define RTL8188E_AGC_TAB "rtl8188E\\AGC_TAB_1T.txt"
46 #define RTL8188E_PHY_MACREG "rtl8188E\\MAC_REG.txt"
47 #define RTL8188E_PHY_REG_PG "rtl8188E\\PHY_REG_PG.txt"
48 #define RTL8188E_PHY_REG_MP "rtl8188E\\PHY_REG_MP.txt"
50 /* RTL8188E Power Configuration CMDs for USB/SDIO interfaces */
51 #define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow
52 #define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow
53 #define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow
54 #define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow
55 #define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow
56 #define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow
57 #define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow
58 #define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow
59 #define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow
61 #define DRVINFO_SZ 4 /* unit is 8bytes */
62 #define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len) & 0x7F ? 1 : 0))
64 /* download firmware related data structure */
65 #define FW_8188E_SIZE 0x4000 /* 16384,16k */
66 #define FW_8188E_START_ADDRESS 0x1000
67 #define FW_8188E_END_ADDRESS 0x1FFF /* 0x5FFF */
69 #define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */
71 #define IS_FW_HEADER_EXIST(_pFwHdr) \
72 ((le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x92C0 || \
73 (le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x88C0 || \
74 (le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x2300 || \
75 (le16_to_cpu(_pFwHdr->signature)&0xFFF0) == 0x88E0)
77 #define DRIVER_EARLY_INT_TIME 0x05
78 #define BCN_DMA_ATIME_INT_TIME 0x02
80 enum usb_rx_agg_mode {
87 #define MAX_RX_DMA_BUFFER_SIZE_88E \
88 0x2400 /* 9k for 88E nornal chip , MaxRxBuff=10k-max(TxReportSize(64*8),
89 * WOLPattern(16*24)) */
91 #define MAX_TX_REPORT_BUFFER_SIZE 0x0400 /* 1k */
94 /* BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */
95 #define MAX_TX_QUEUE 9
97 #define TX_SELE_HQ BIT(0) /* High Queue */
98 #define TX_SELE_LQ BIT(1) /* Low Queue */
99 #define TX_SELE_NQ BIT(2) /* Normal Queue */
101 /* Note: We will divide number of page equally for each queue other
102 * than public queue! */
103 /* 22k = 22528 bytes = 176 pages (@page = 128 bytes) */
104 /* must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) */
105 /* 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS
108 #define TX_TOTAL_PAGE_NUMBER_88E 0xA9/* 169 (21632=> 21k) */
110 #define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1)
112 /* Note: For Normal Chip Setting ,modify later */
113 #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER \
114 TX_TOTAL_PAGE_NUMBER_88E /* 0xA9 , 0xb0=>176=>22k */
115 #define WMM_NORMAL_TX_PAGE_BOUNDARY_88E \
116 (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) /* 0xA9 */
119 #define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3)
120 #define CHIP_BONDING_92C_1T2R 0x1
121 #define CHIP_BONDING_88C_USB_MCARD 0x2
122 #define CHIP_BONDING_88C_USB_HP 0x1
123 #include "HalVerDef.h"
141 struct txpowerinfo24g {
142 u8 IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
143 u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
144 /* If only one tx, only BW20 and OFDM are used. */
145 s8 CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT];
146 s8 OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT];
147 s8 BW20_Diff[MAX_RF_PATH][MAX_TX_COUNT];
148 s8 BW40_Diff[MAX_RF_PATH][MAX_TX_COUNT];
151 #define EFUSE_REAL_CONTENT_LEN 512
152 #define EFUSE_MAX_SECTION 16
153 #define EFUSE_IC_ID_OFFSET 506 /* For some inferior IC purpose*/
154 #define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN)
155 /* To prevent out of boundary programming case, */
156 /* leave 1byte and program full section */
157 /* 9bytes + 1byt + 5bytes and pre 1byte. */
158 /* For worst case: */
159 /* | 1byte|----8bytes----|1byte|--5bytes--| */
160 /* | | Reserved(14bytes) | */
162 /* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
163 #define EFUSE_OOB_PROTECT_BYTES 15
165 #define HWSET_MAX_SIZE_88E 512
167 #define EFUSE_REAL_CONTENT_LEN_88E 256
168 #define EFUSE_MAP_LEN_88E 512
169 #define EFUSE_MAP_LEN EFUSE_MAP_LEN_88E
170 #define EFUSE_MAX_SECTION_88E 64
171 #define EFUSE_MAX_WORD_UNIT_88E 4
172 #define EFUSE_IC_ID_OFFSET_88E 506
173 #define AVAILABLE_EFUSE_ADDR_88E(addr) \
174 (addr < EFUSE_REAL_CONTENT_LEN_88E)
175 /* To prevent out of boundary programming case, leave 1byte and program
177 /* 9bytes + 1byt + 5bytes and pre 1byte. */
178 /* For worst case: */
179 /* | 2byte|----8bytes----|1byte|--7bytes--| 92D */
180 /* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
181 #define EFUSE_OOB_PROTECT_BYTES_88E 18
182 #define EFUSE_PROTECT_BYTES_BANK_88E 16
184 /* EFUSE for BT definition */
185 #define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */
186 #define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */
187 #define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */
189 #define EFUSE_PROTECT_BYTES_BANK 16
191 /* For RTL8723 WiFi/BT/GPS multi-function configuration. */
193 RT_MULTI_FUNC_NONE = 0x00,
194 RT_MULTI_FUNC_WIFI = 0x01,
195 RT_MULTI_FUNC_BT = 0x02,
196 RT_MULTI_FUNC_GPS = 0x04,
199 /* For RTL8723 regulator mode. */
200 enum rt_regulator_mode {
201 RT_SWITCHING_REGULATOR = 0,
202 RT_LDO_REGULATOR = 1,
205 struct hal_data_8188e {
206 struct HAL_VERSION VersionID;
207 enum rt_regulator_mode RegulatorMode; /* switching regulator or LDO */
212 u16 FirmwareVersionRev;
213 u16 FirmwareSubVersion;
214 u16 FirmwareSignature;
216 /* current WIFI_PHY values */
218 enum wireless_mode CurrentWirelessMode;
219 enum ht_channel_width CurrentChannelBW;
221 u8 nCur40MhzPrimeSC;/* Control channel sub-carrier */
232 /* EEPROM setting. */
238 u8 EEPROMSubCustomerID;
242 u8 bTXPowerDataReadFromEEPORM;
243 u8 EEPROMThermalMeter;
244 u8 bAPKThermalMeterIgnore;
247 /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */
248 u8 EfuseMap[2][HWSET_MAX_SIZE_512];
249 u8 EfuseUsedPercentage;
250 struct efuse_hal EfuseHal;
252 u8 Index24G_CCK_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
253 u8 Index24G_BW40_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
254 /* If only one tx, only BW20 and OFDM are used. */
255 s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
256 s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
257 s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
258 s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
260 u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
261 /* For HT 40MHZ pwr */
262 u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
263 /* For HT 40MHZ pwr */
264 u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
265 /* HT 20<->40 Pwr diff */
266 u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
267 /* For HT<->legacy pwr diff */
268 u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
269 /* For power group */
270 u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
271 u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
273 u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */
274 /* The current Tx Power Level */
275 u8 CurrentCckTxPwrIdx;
276 u8 CurrentOfdm24GTxPwrIdx;
277 u8 CurrentBW2024GTxPwrIdx;
278 u8 CurrentBW4024GTxPwrIdx;
281 /* Read/write are allow for following hardware information variables */
285 u8 DefaultInitialGain[4];
287 u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
288 u32 CCKTxPowerLevelOriginalOffset;
291 u32 AntennaTxPath; /* Antenna path Tx */
292 u32 AntennaRxPath; /* Antenna path Rx */
296 u8 bLedOpenDrain; /* Open-drain support for controlling the LED.*/
298 u8 b1x1RecvCombine; /* for 1T1R receive combining */
300 u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
302 struct bb_reg_def PHYRegDef[4]; /* Radio A/B/C/D */
309 /* for host message to fw */
314 /* Beacon function related global variable. */
320 struct dm_priv dmpriv;
321 struct odm_dm_struct odmpriv;
322 struct sreset_priv srestpriv;
329 u8 bDumpRxPkt;/* for debug */
330 u8 bDumpTxPkt;/* for debug */
331 u8 FwRsvdPageStartOffset; /* Reserve page start offset except
334 /* 2010/08/09 MH Add CU power down mode. */
337 /* Add for dual MAC 0--Mac0 1--Mac1 */
343 /* Add for USB aggreation mode dynamic shceme. */
344 bool UsbRxHighSpeedMode;
346 /* 2010/11/22 MH Add for slim combo debug mode selective. */
347 /* This is used for fix the drawback of CU TSMC-A/UMC-A cut.
348 * HW auto suspend ability. Close BT clock. */
353 /* Auto FSM to Turn On, include clock, isolation, power control
359 /* Interrupt relatd register information. */
360 u32 IntArray[3];/* HISR0,HISR1,HSISR */
365 u16 HwRxPageSize; /* Hardware setting */
366 u32 MaxUsbRxAggBlock;
368 enum usb_rx_agg_mode UsbRxAggMode;
369 u8 UsbRxAggBlockCount; /* USB Block count. Block size is
370 * 512-byte in high speed and 64-byte
372 u8 UsbRxAggBlockTimeout;
373 u8 UsbRxAggPageCount; /* 8192C DMA page count */
374 u8 UsbRxAggPageTimeout;
377 #define GET_HAL_DATA(__pAdapter) \
378 ((struct hal_data_8188e *)((__pAdapter)->HalData))
379 #define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type)
381 #define INCLUDE_MULTI_FUNC_BT(_Adapter) \
382 (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
383 #define INCLUDE_MULTI_FUNC_GPS(_Adapter) \
384 (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
386 /* rtl8188e_hal_init.c */
387 void _8051Reset88E(struct adapter *padapter);
388 void rtl8188e_InitializeFirmwareVars(struct adapter *padapter);
391 s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy);
394 void Hal_InitPGData88E(struct adapter *padapter);
395 void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo);
396 void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *hwinfo,
399 void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo,
401 void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo,
403 void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo,
405 void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent,
407 void Hal_ReadThermalMeter_88E(struct adapter *dapter, u8 *PROMContent,
409 void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo,
411 void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo,
413 void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter, u8 *hwinfo,
416 void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
420 void rtl8188e_start_thread(struct adapter *padapter);
421 void rtl8188e_stop_thread(struct adapter *padapter);
423 s32 iol_execute(struct adapter *padapter, u8 control);
424 void iol_mode_enable(struct adapter *padapter, u8 enable);
425 s32 rtl8188e_iol_efuse_patch(struct adapter *padapter);
426 void rtw_cancel_all_timer(struct adapter *padapter);
428 #endif /* __RTL8188E_HAL_H__ */