Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / staging / iio / accel / adis16204.h
1 #ifndef SPI_ADIS16204_H_
2 #define SPI_ADIS16204_H_
3
4 #define ADIS16204_STARTUP_DELAY 220 /* ms */
5
6 #define ADIS16204_FLASH_CNT      0x00 /* Flash memory write count */
7 #define ADIS16204_SUPPLY_OUT     0x02 /* Output, power supply */
8 #define ADIS16204_XACCL_OUT      0x04 /* Output, x-axis accelerometer */
9 #define ADIS16204_YACCL_OUT      0x06 /* Output, y-axis accelerometer */
10 #define ADIS16204_AUX_ADC        0x08 /* Output, auxiliary ADC input */
11 #define ADIS16204_TEMP_OUT       0x0A /* Output, temperature */
12 #define ADIS16204_X_PEAK_OUT     0x0C /* Twos complement */
13 #define ADIS16204_Y_PEAK_OUT     0x0E /* Twos complement */
14 #define ADIS16204_XACCL_NULL     0x10 /* Calibration, x-axis acceleration offset null */
15 #define ADIS16204_YACCL_NULL     0x12 /* Calibration, y-axis acceleration offset null */
16 #define ADIS16204_XACCL_SCALE    0x14 /* X-axis scale factor calibration register */
17 #define ADIS16204_YACCL_SCALE    0x16 /* Y-axis scale factor calibration register */
18 #define ADIS16204_XY_RSS_OUT     0x18 /* XY combined acceleration (RSS) */
19 #define ADIS16204_XY_PEAK_OUT    0x1A /* Peak, XY combined output (RSS) */
20 #define ADIS16204_CAP_BUF_1      0x1C /* Capture buffer output register 1 */
21 #define ADIS16204_CAP_BUF_2      0x1E /* Capture buffer output register 2 */
22 #define ADIS16204_ALM_MAG1       0x20 /* Alarm 1 amplitude threshold */
23 #define ADIS16204_ALM_MAG2       0x22 /* Alarm 2 amplitude threshold */
24 #define ADIS16204_ALM_CTRL       0x28 /* Alarm control */
25 #define ADIS16204_CAPT_PNTR      0x2A /* Capture register address pointer */
26 #define ADIS16204_AUX_DAC        0x30 /* Auxiliary DAC data */
27 #define ADIS16204_GPIO_CTRL      0x32 /* General-purpose digital input/output control */
28 #define ADIS16204_MSC_CTRL       0x34 /* Miscellaneous control */
29 #define ADIS16204_SMPL_PRD       0x36 /* Internal sample period (rate) control */
30 #define ADIS16204_AVG_CNT        0x38 /* Operation, filter configuration */
31 #define ADIS16204_SLP_CNT        0x3A /* Operation, sleep mode control */
32 #define ADIS16204_DIAG_STAT      0x3C /* Diagnostics, system status register */
33 #define ADIS16204_GLOB_CMD       0x3E /* Operation, system command register */
34
35 /* MSC_CTRL */
36 #define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST      BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
37 #define ADIS16204_MSC_CTRL_SELF_TEST_EN         BIT(8)  /* Self-test enable */
38 #define ADIS16204_MSC_CTRL_DATA_RDY_EN          BIT(2)  /* Data-ready enable: 1 = enabled, 0 = disabled */
39 #define ADIS16204_MSC_CTRL_ACTIVE_HIGH          BIT(1)  /* Data-ready polarity: 1 = active high, 0 = active low */
40 #define ADIS16204_MSC_CTRL_DATA_RDY_DIO2        BIT(0)  /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */
41
42 /* DIAG_STAT */
43 #define ADIS16204_DIAG_STAT_ALARM2        BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
44 #define ADIS16204_DIAG_STAT_ALARM1        BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
45 #define ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag: 1 = error condition,
46                                                 0 = normal operation */
47 #define ADIS16204_DIAG_STAT_SPI_FAIL_BIT      3 /* SPI communications failure */
48 #define ADIS16204_DIAG_STAT_FLASH_UPT_BIT     2 /* Flash update failure */
49 #define ADIS16204_DIAG_STAT_POWER_HIGH_BIT    1 /* Power supply above 3.625 V */
50 #define ADIS16204_DIAG_STAT_POWER_LOW_BIT     0 /* Power supply below 2.975 V */
51
52 /* GLOB_CMD */
53 #define ADIS16204_GLOB_CMD_SW_RESET     BIT(7)
54 #define ADIS16204_GLOB_CMD_CLEAR_STAT   BIT(4)
55 #define ADIS16204_GLOB_CMD_FACTORY_CAL  BIT(1)
56
57 #define ADIS16204_ERROR_ACTIVE          BIT(14)
58
59 enum adis16204_scan {
60         ADIS16204_SCAN_ACC_X,
61         ADIS16204_SCAN_ACC_Y,
62         ADIS16204_SCAN_ACC_XY,
63         ADIS16204_SCAN_SUPPLY,
64         ADIS16204_SCAN_AUX_ADC,
65         ADIS16204_SCAN_TEMP,
66 };
67
68 #endif /* SPI_ADIS16204_H_ */